Used Beveler for sale (494)

Year of construction: 2022, condition: used, Technical data: Maximum parent roll width: 1420 mm Minimum parent roll width: 600 mm Maximum parent roll diameter: 1500 mm Maximum parent roll weight: 2500 kg Maximum unwinding tension (Ø1500 mm): 600 N Minimum unwinding tension (Ø1000 mm): 40 N Minimum standard slitting width: 100 mm Maximum rewinding width: 1400 mm Maximum rewinding diameter: 1050 mm Prjdoxx Tbcepfx Adiod Maximum rewinding weight: • Ø76 mm shaft: 600 kg • Ø152 mm shaft: 1000 kg Maximum rewinding tension: 600 N Maximum production speed: 600 m/min Power supply: 3 x 400V 50Hz Installed power: 30 kW Compressed air: 6 bar, dry Compressed air: 5–40°C Noise level: 82 dB(A) Color: Grey RAL 7035 Materials to be slit: • Paper-/liner-based packaging laminates. • Board from 80 to 300 g/m². Unwind section: A separate between-centers unwinder, type T9, 1500 mm diameter, including: • Hydraulic cylinder for lifting parent rolls from the floor. • Two motors driving the unwind roll, controlled by an ultrasonic diameter sensor and a tension-control dancer roller. • Two pneumatic expanding adapters, SVECOM, for 70/76 mm (3") cores. • Two pneumatic expanding adapters, SVECOM, for 150/152 mm (6") cores (mounted on the pneumatic end adapters). • Floating edge-correction roller. • Automatic web guiding system, FIFE DP20, with SE26A photoelectric sensor, ±100 mm correction via electric actuator — for controlling sheet edge or continuous printed line. • Connecting walkway, enabling web threading at floor level while maintaining full access to the slitting station. • All web path rollers are anodized. • Safety guarding for operator protection. Slitting section: A slitting station with individual pneumatic knives and circular counter-knives: • Shear cutting performed against the counter-knives. • Counter-knife shaft driven by an independent motor; counter-knife shaft is pneumatic. • Pneumatic knife holders mounted on a beam with dovetail guide (TIDLAND) and an air supply manifold for individual activation. • 10 slitting sets, each including: Individual TIDLAND pneumatic knife holder (25 mm width) and double-bevel circular knife Ø 90/60 mm. • Set of multi-groove counter-knife rings, 5 mm pitch, 50 mm length. Web separation section: • Separator roller, driven by the slitting motor; angle and curvature fully adjustable. Lay-on roller: • Lay-on roller made of anodized ground aluminum or polyurethane (depending on processed materials). • Pressure is adjustable and synchronized with the winding diameter. • Roller is removable. Automatic splicing / transverse cutting system: • Hydraulically operated pivoting arm including a linear transverse knife and backing plate for securing the web to new cores. Trim extraction system: • Trim suction unit with two width-adjustable nozzles. • Turbine enclosed in a sound-insulated cabinet, conveying trim to a central system or container (not included). Rewinding section: • Motorized turret (two-position) with two rewinding shafts. • Rewinding shaft drive via oversized asynchronous motor. • Hydraulic centering point for the active rewinding roll. • Two pneumatic expanding shafts Ø76 mm (3”), max load 600 kg each, featuring full-width rubber strips with individual bladders. • Two pneumatic expanding shafts Ø152 mm (6”), max load 1000 kg each, also equipped with full-width rubber strips and individual bladders.

Condition: new, power: 390 kW (530.25 HP), overall weight: 32,000 kg, fuel type: diesel, color: silver, axle configuration: 8x4, tire size: 315/80R22.5, wheelbase: 4,850 mm, brakes: engine braking, driver cabin: sleeper cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, navigation system, onboard computer, parking heater, power assisted steering, seat heater, traction control, Vehicle location: incoming / in transit, ClassicSpace, Active Brake Assist, Mercedes PowerShift 3, building material body, one comfort seat, one bunk, seat heating, rear window, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, cruise control, navigation system, auxiliary heating, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, fog lights, work lights, rotating beacon, roof hatch, green environmental sticker Wheelbase: 4850 mm, 8t front axle, rear axle bevel gear 440 hypoid 13t, electronic braking system with ABS and ASR, disc brakes with partial guard on front and rear axles, electronic parking brake, condensate monitoring for compressed air system, front axle stabilizer, additional stabilizer rear/trailing axle, front underrun protection made of aluminum, seatbelt monitoring, one lower bunk, residual heat utilization, additional hot water heater, additional thermal insulation, PSM 2nd generation, reverse warning system, illuminated Mercedes star, ClassicSpace, comfort locking system, light and rain sensor, driving program economy/power, Mercedes PowerShift 3, navigation system, Multimedia Cockpit Interactive, pre-installation for toll recording, LED daytime running lights, High Performance Engine Brake, cyclone pre-filter for coarse dust, Safety Pack, ESP, lane keeping assist, distance assist, attention assist, traffic sign assist, Active Brake Assist 5, driver's airbag, rear engine PTO with hydraulic pump ISO 7653D. Pedpfx Aew E Nq Nsdiord All information without guarantee, as the vehicle is incoming! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, intermediate sale and errors!

Condition: used, Holz Her UNO 1303 + PU Edge thickness 0.4 -3 mm (6 mm) Control panel with selector switches for setting the units Fully automatic edge magazine for rolls and strips Prjdpfjxlz Nzox Adisd Adhesive application station: cartridges + PU gluing Workpiece height 6-55 mm Pneumatic pressure unit Cutting unit for rolls and strips up to 3 mm (6 mm) edge thickness with adjustment of 0-10° angle of the cutting saws Milling unit, flush milling, radius milling, bevel milling - 15° Scraping unit for bevels and radii Surface scraping unit - finish Machine is CHECKED in TOP CONDITION from a very well-maintained craft business from the Lieboch warehouse

Condition: used, Year of construction: 2018, Opportunity to buy an outstanding ESAB plasma cutting machine built in 2018. Equipped with: ESAB DMX KIT automatic plasma beveler + iSeries 300 BEVEL PT 36 plasma torch with cutting and marking function Integrated water cooler and coolant Multi-point collision protection system Carbon steel injection: 40 mm Maximum cutting thickness for carbon steel: 45 mm Psdpfoxltg Sjx Adierd Stainless steel injection: 25 mm Maximum cutting thickness for stainless steel: 30 mm Aluminum injection: 25 mm Maximum cutting thickness for aluminum: 30 mm Availability: 02/2026 Viewing possible upon appointment. Multiple videos of the machine in operation available on request. Please note: The information on this page has been obtained to the best of our ability and belief. This information is provided in good faith, but its accuracy is not guaranteed. Accordingly, this information is not binding and does not constitute a contractual condition. We recommend that you check all essential details during an inspection of the machine. To save unnecessary travel costs for our customers, in most cases we recommend organizing a live video inspection. CNC Control: Esab Vision T5 Plasma source: iSeries 300 BEVEL Travel path length: 9000 mm Table width: 3400 mm Table length: 6500 mm Cutting width: 3000 mm Cutting length: 6000 mm Table height: 700 mm Exhaust section length: 515 mm Speed: up to 24000 mm/min Connected voltage: 230V Frequency: 50/60 Hz Power consumption: 2000 VA

Condition: used, mileage: 110,000 km, power: 375 kW (509.86 HP), first registration: 06/2024, fuel type: diesel, overall weight: 18,000 kg, axle configuration: 2 axles, color: white, gearing type: automatic, emission class: euro6, Equipment: ABS, air conditioning, electronic stability program (ESP), navigation system, parking heater, soot filter, Demonstration vehicles 1 unit available Main Components FH Globetrotter Safety Cab Wheelbase: 3,800 mm Chassis height: MED (medium) Diesel engine 12.8 l, 510 HP/375 kW, 2,550 Nm Rear axle RSS1352A, single reduction, 13 t axle load, GCW 52 t I-Shift AT2612, automated 12-speed transmission (direct drive), max. input torque: 2,652 Nm Drive axle ratio 2.47 : 1 Reinforced Volvo Engine Brake+ (VEB+) Dura-Bright EVO aluminium wheels (polished) Paint: 1103WHIT Winter White Rest package FH, one bed Info and media package with navigation Driver comfort package Side collision avoidance and turn assist (both sides) Close-range camera on passenger side I-ParkCool (integrated parking air conditioning with automatic temperature control) PTO PTR-DH (high-speed), gearbox-mounted, rear connection: 1 DIN for pump Cab Interior, Living Driver’s seat comfort, air-suspended, heated, seatbelt integrated Two armrests on the driver’s seat Leather-covered armrests Passenger seat standard, fixed Foam comfort mattress for lower berth, firm, foldable, with safety net Basic mattress topper (20 mm) Storage space under bunk Storage compartments above bunk, capacity: 245 l Control panel (basic) at bunk (interior light, auxiliary heater, roof hatch and door locking) 33-litre fridge with freezer compartment, under bunk Compartment under dashboard with drawer Bottle holders front and rear Vanity/shaving mirror Two flexible reading lights Interior lighting with dimmer and red night lighting Side sun visor, driver’s side Interior sunblind, manual roller Roof window and emergency exit, manually operated (tinted glass) Curtains for windscreen and windows 2 rubber floor mats Central locking with remote control Cab auxiliary heater, 2 kW Automatic climate control with sun sensor Cab Interior, Driving Load/axle load indicator in vehicle display Battery indicator in display Leather steering wheel Adjustable steering wheel (height & angle), with additional steering column adjustment Roof antenna and CB radio prep Digital tachograph, generation 4 Eco cruise control (cruise control) incl. brake cruise Lane keeping assist Battery pulser device Adaptive cruise control (ACC) with collision warning and emergency braking Immobiliser, transponder in key Transmission/I-Shift control via control unit on driver's seat I-See with map-based topography information (high resolution) Trailer parking brake active up to max. 7 km/h Electronic Stability Program (ESP), basic version with normal centre of gravity Chassis Rear axle load (technical) max. 13 t Front axle load (technical) max. 7.5 t Front parabolic suspension, 2-leaf (regular hardness) Pedstxfw Repfx Adijrd Rear air suspension, 4 air bags Three ride heights for air suspension 650-litre aluminium fuel tank left 112-litre AdBlue tank right Single battery system: one battery block (2 single batteries) for complete vehicle electrics Two work lights rear/top of cab, LED white Trailer recognition with LED sensor Bevelled frame end Frame thickness 6.5 mm Frame section height 266 mm Frame length rear 825 mm Additional spring brake on front axle Disc brakes, solid discs on steering axle Disc brakes on drive axle, solid, 410 mm diameter Air compressor 2-cylinder, 1,100 l/min Steel support bracket for trailer connections behind cab SAF-Holland/GF fifth wheel, SK-S 36.20, cast 1 folding wheel chock, front position Five 6 mm pneumatic lines (for body control) in cab Prepared for work

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 20,000 W, travel distance X-axis: 3,500 mm, travel distance Y-axis: 28,000 mm, travel distance Z-axis: 850 mm, positioning speed: 40 m/min, workpiece weight (max.): 35,000 kg, input frequency: 50 Hz, type of input current: three-phase, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, NS-12020H PROFILE STEEL LASER CUTTING AUTOMATION LINE Technical Specifications Laser Power: 12000W-20000W X-axis Travel: 3500mm Y-axis Travel: 28000mm (customizable) Z-axis Travel: 800mm A-axis Travel: ±90° C-axis Travel: ±90° U-axis Travel: 30mm Maximum Speed: 40m/min Positioning Accuracy: ±0.1mm Main Features： Simple and Stylish Integrated simple structure with a mobile design. Features a main control panel, laser unit, chiller, electrical cabinet, and cantilever beam structure, all highly integrated for stable mobility and operation. Quality Assurance Prodpfsvmwxxox Adied Precision calibration and compensation of steel profiles. Enables automatic positioning and error detection of steel profiles. High positioning accuracy, low sizing error, and a 100% one-time through-hole rate. Increased Efficiency, Reduced Costs Professional material-checking software enables one-click nesting. Optimizes cutting sequences based on raw materials and component specifications. Automatically joins leftover materials to minimize waste and reduce costs. All-in-One Service Powerful 3D five-axis CNC technology. Supports profile cutting and 45-degree bevel cuts. Adapts to various cutting processes for different applications. Enhanced Quality and Efficiency Seamlessly integrates with TEKLA steel structure design software for professional and efficient operations. Reduces complex modeling processes and saves time on manual drawings. Enables one-click generation of component process codes to significantly boost production efficiency. Smart Management Automated loading and unloading system for streamlined feeding and cutting. Fully automated one-stop workflow. Efficiently completes bulk operations, reducing manual intervention and labor costs.

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Like-new municipal winter service truck: Mercedes-Benz Arocs 2235 4x4 all-wheel drive tipper, 22 t gross vehicle weight, equipped with Meiller three-way tipper body and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera and much more. German vehicle, single owner, only 20,553 km, new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload at 18,000 kg GVW: 7,672 kg Payload at 22,000 kg GVW (winter service): 11,672 kg Weight variant: 20.5 t (9.0/13.0) Permissible gross vehicle weight for winter service: 22,000 kg Increased front axle load for winter service: 10.5 t Front axle: 9.0 t straight; rear axle: bevel gear 300, planetary gears, 13.4 t Front spring: 10.5 t, 3-leaf; rear spring: 13.0 t Pedpfx Adexlwngsijrd Meiller winter service hydraulics for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-cab ClassicSpace with rear window Additional thermal insulation Engine: OM936, inline-6, 7.7 l, 260 kW (354 hp), 1400 Nm, Euro 6 E Drive: 4x4 Differential locks front and rear axles Axle ratio: i = 4.143 Meiller three-way tipper body, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side boards: 600 mm high Additional removable aluminium side board extensions +400 mm Lashing eyes in tipper bed floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04, engageable PTO via engine driven output Automatic climate control Auxiliary hot water heater Towing hitch: Maul Ringfeder D40 with air connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross combination weight: 40,000 kg Front and rear axles with leaf springs Front and rear stabilizer Electronic braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290-litre fuel tank LED daytime running lights LED rear lights Fog lamps 2 rotating beacons on the rear above cab roof Rear work lights Exhaust routed vertically behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver's air-suspension seat Comfort central locking system with remote control Last Mercedes-Benz service performed 10/2025 German vehicle, one owner Top-maintained, like-new condition Net price plus 19% VAT. Attractive financing options available. All information subject to change. Errors and intermediate sale reserved. Internal vehicle number: 2577.

Condition: used, mileage: 233,011 km, power: 380 kW (516.66 HP), first registration: 10/2018, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 13,970 kg, empty load weight: 12,030 kg, next inspection (TÜV): 09/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 2,550 mm, total width: 3,700 mm, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, company-owned, 2x comfort seats, seat heating, electric mirrors, heated mirrors, electric window (left and right), air conditioning, sun visor, radio CD, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, high beam headlights, work lights, rotating beacon, storage box, leaf/air suspension, last axle liftable and steerable, trailer coupling with air and electrical connections, aluminum tank, underrun protection, hydraulic transverse locking, roof hatch, green environmental badge. Wheelbase: 4,500 mm. Body: 20t Marrel AL20S56 hooklift system for containers up to 6.8m. Front axle: 8.0 t, rear axle: bevel gear 485, hypoid, 13.0 t, trailing axle: 9 t, steered, unloadable, liftable. Disc brakes on front and rear axles. Driver and passenger air-sprung comfort seats, leather, high storage on engine tunnel. Cable remote control for air suspension. Illuminated Mercedes star. ClassicSpace S-cab, 2.30 m wide, tunnel 170 mm. Central locking with 2 keys. Mercedes PowerShift 3, transmission G 281-12/14.93-1.0. 12.7 cm combined instrument cluster with additional displays. Radio/navigation system Bluetooth®, comfort, 2-way speaker system. Tank: 510 l, left, 650 x 700 x 1300 mm, aluminum. Bi-xenon headlights, headlamp cleaning system, fog lamps, LED daytime running lights, LED rear lights. Engine: OM473, inline-6, 15.6 l, 380 kW (517 hp), 2,600 Nm, Euro VI, version 2. Engine brake, standard system, NA MB 131-2c, pump, rear engine PTO, hydraulic pump ISO 7653D. Standard trailer coupling D40, Ringfeder. Stability Control (ESP), Lane Keeping Assist, Attention Assist, Active Brake Assist, cruise control. Total length: 8,550 mm - 9,450 mm Width: 2,550 mm Pjdpfsxbfx Sex Adijrd Height: 3,700 mm Accessories listed without guarantee. Changes, prior sale, and errors excepted!

Condition: new, empty load weight: 3,120 kg, maximum load weight: 8,780 kg, overall weight: 11,900 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel side walls, foldable and removable, wooden planks 50 mm, loading area bevelled at the rear, inside loading area width 2480 mm, rear stanchion removable, front for through-loading, , Also available with 5300 mm loading area length!!, , Rental price from 500 ¤, , --  Subject to printing errors, mistakes and changes, Sample images --, More data at: !, More details: ! Pjdpfx Aoxf Tz Ajdisrd

Condition: new, A heavy duty German built radial arm crosscut saw with swivel and tilting capability and a large cutting capacity of up to 200mm deep. A unique feature on this model of machine is that when angle cutting is required the saw unit pivots about a central point thus always maintaining the same cutting length. Both optional vertical (tilting) and standard horizontal (swivel) angles can be adjusted manually with either graduated scales or with an optional digital display unit for reading the position. The saw is also available with an optional automatic NC positioning system with 4 memorised pre set positions. The machine is ideally suited for easy and accurate cutting of compound angles for furniture and joinery components. The machine can be specified to cut wood, aluminium, plastics or composite materials. Precision ball bearing movement on hardened steel runners. Sturdy cast iron construction with steel base stand Heavy duty 5 KW motor. Spring return of saw carriage. 1 x 520mm dia TCT x 4.4mm kerf x 50mm bore - 60 teeth WZ saw alternate bevel. 50mm spindle diameter. 22 - 90 - 45 horizontal movement. (Swivel) 30 - 90 - 60 vertical movement. (Tilt - optional N model) Prsdpfxody Hm Ns Adisd Adjustable upper protection. 520mm TCT sawblade Z60. Cutting Capacity: 420 wide x 200mm deep at 90 degrees. 295 wide x 200mm deep at 45 degrees. 420 wide x 140mm deep at 45 degrees. (Tilt- optional N model). Dust extraction outlet 100mm. Working height of table 900mm

Condition: new, maximum load weight: 37,635 kg, overall weight: 48,000 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment features. Complete specifications available on request. Gooseneck: * Gooseneck with front corners beveled approx. 45° and rear chamfer approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick One-piece steel ramps: * One pair of galvanized one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood covering * Ramps with hydraulic lifting mechanism, hydraulically adjustable * Maximum load per pair: 40,000 kg In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm in driving position do not count towards the vehicle length Loading area: * 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) Predjxtc Ubspfx Adiod * Wheel recesses with square climbing strips approx. 15 x 15 mm as well as extensions in the lower area * Between the first and second axles, one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D). Includes three-piece removable galvanized covers over the wheel recesses (W approx. 670 mm) – max. point load 5 t/each * Recess in the inclined area as well as projecting into the loading area to accommodate excavator boom (approx. 2,900 x 750 x 210/290 mm (L x W x H)) * 1 pair of lashing rings (horizontal) at the front of the loading area (LC 10,000 daN) * 5 pairs of fold-out lashing rings (LC 5,000 daN) * 3 pairs of fold-out lashing rings (LC 10,000 daN), 2 pairs of lashing rings in the excavator boom recess (LC 5,000 daN) * Cut-outs in the outer frame of the loading area to hook in tensioning straps (LC 2,000 daN) Landing legs: * JOST landing legs (mechanical) with 2-speed gearbox, lifting capacity approx. 24 t (test load approx. 50 t) Axles: * BPW axles and suspension, 2 rigid axles, 1 trailing steering axle * Technical axle load: 12,000 kg each * Electromagnetic reversing lock, activated via reverse gear and manually * Air suspension with lift/lowering valve * Axle tool kit Tyres: * Tyres 235/75 R 17.5 3PMSF – brand at our discretion * TPMS: Tyre Pressure Monitoring System in accordance with ECE R 141. Data is transmitted to the tractor via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to receive and display this data Braking system: * WABCO brake system in accordance with EU regulations, with EBS-E (2S2M) and without connection lines to the tractor unit Steel construction: * Steel structure made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Electrical system: * Electrical system in accordance with EU regulations, 24-volt ASPÖCK-NORDIK (ASS3) lighting * ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets * Connections according to ISO: 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Paintwork: * Complete steel construction automatically shot-blasted with turbine blasting machine after welding * Second blasting treatment with corundum for optimum coating adhesion * Final coating with 2 layers of 2K topcoat, single color in RAL 3002 Carmine Red as per RAL system 841GL * Rims in silver * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray mist test according to ISO 9227-NSS * Cavity sealing with special wax Including the following extras: * 2-inch kingpin * One

Condition: new, functionality: fully functional, Year of construction: 2025, laser power: 30,000 W, travel distance X-axis: 3,050 mm, travel distance Y-axis: 13,050 mm, travel distance Z-axis: 450 mm, positioning accuracy: 0.03 mm, repeat accuracy: 0.02 mm, workpiece weight (max.): 20,000 kg, input frequency: 50 Hz, total length: 16,800 mm, total width: 2,200 mm, total height: 5,120 mm, warranty duration: 24 months, working range: 13,000 mm, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, GS-CL Series, Glorystar Single Table Gantry Type Metal Laser Cutting Machine Laser Power: 12000-80000W Predpfxjvmwn Ho Adied Fits in a standard 40HQ container The GS-L Series is a high-power metal laser cutting machine with a gantry-type segmented bed design. It can be freely customized to meet processing format requirements according to customer needs. Key Features: ● Super Large Processing Format with a gantry-style segmented design. ● The GS-L Series has the largest Z-axis travel and height in its class in the industry. Supports extreme thickness cutting for plates over 20mm. Capable of cutting ultra-thick plates up to 70mm. ● High Negative Pressure Automatic Partition Dust Removal ● Equipped with a high-air-volume fan for effective dust removal. Technical parameters: Working area (mm): 13000mm*3000mm（bevel cut: 12500mm*2500mm） X axis travel distance (mm): 3050mm Y axis travel distance (mm): 13050mm Z axis travel distance (mm): 450mm X/Y axis positioning accuracy: ≤0.03mm/m X/Y axis repeat positioning accuracy: ≤±0.02mm Max. synthetic positioning speed: 110m/min Max. acceleration: 1.2G Min. setting unit: 0.001mm Floor size (mm): 18500mm*6500mm Main body dimension (mm): 16800mm*5120mm*2200mm Worktable max. weight capacity (T): 20 tons (even load bearing)

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Almost new municipal winter service truck Mercedes-Benz Arocs 2235 4x4 all-wheel tipper with 22 t gross vehicle weight, Meiller three-way tipper and Meiller winter service hydraulics, front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera, and much more. German one-owner vehicle with only 20,553 km (odometer), new service performed by Mercedes-Benz in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload with 18,000 kg gross weight: 7,672 kg Payload with 22,000 kg gross weight (winter service): 11,672 kg Weight variant 20.5 t (9.0/13.0) Permitted gross weight during winter service: 22,000 kg Winter service front axle load increased: 10.5 t Front axle: 9.0 t straight, Rear axle: bevel gear 300, planetary design, 13.4 t Front leaf spring: 10.5 t, 3-leaf; Rear leaf spring: 13.0 t Winter service hydraulics by Meiller for plough and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen M-driver’s cab ClassicSpace with rear window Additional heat insulation Engine: OM936, R6, 7.7 l, 260 kW (354 HP), 1400 Nm, Euro 6 E Drive: 4x4 Differential lock front and rear axle Axle ratio i = 4.143 Meiller 3-way tipper, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side walls: 600 mm high Removable aluminium side wall extensions +400 mm Lashing pockets in tipper body floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04 selectable PTO via engine power take-off Automatic climate control Auxiliary heater – hot water additional heating Tow hitch Maul Ringfeder D40 with air brake connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross train weight: 40,000 kg Front and rear leaf suspension Front and rear axle stabilisers Electric braking system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290 litre tank LED daytime running lights LED rear lights Fog lights 2 rotating beacons to the rear, above the cab roof Rear work lights Exhaust raised behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver’s air-suspended seat Central locking with remote control Last Mercedes-Benz service performed in 10/2025 German one-owner vehicle Podexlwnaopfx Adierd Meticulously maintained and as-new condition Price NET plus 19% VAT. Attractive financing options available upon request. All details without guarantee. Errors and prior sale excepted. Internal vehicle number: 2577

Condition: good (used), Year of construction: 1995, operating hours: 9,500 h, functionality: fully functional, CHP 250 Automatic Machine for Grinding the Complete Tooth Geometry of Carbide-Tipped Circular Saw Blades. The CHP250 controls two CNC axes for bevel grinding and grinding wheel infeed. Suitable for diameters from 80 to 810 mm and blade thickness up to 8 mm. Each tooth shape can be ground in one cycle either on the face or the back. Tooth pitch: 6 to 120 mm. Rake angle: -30° to +50°. Clearance angle: 5° to 45°. Tooth height difference up to 3 mm. Bevel grinding on the tooth back up to 45°. Bevel grinding on the tooth face up to 15°. Grinding wheel outer diameter: 125 mm; bore diameter: 32 mm. The machine is equipped with a filter cleaning system. The filtration unit is made of stainless steel. A knee switch releases the clamping carriage. Extraction unit and central lubrication are included. There is also a wide range of accessories, including saw blade holders and centering rings. Psdpfxexw Ip Ee Adiord

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 5,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 10 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 6,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Prjdjxf Tz Njpfx Adiod

Condition: good (used), Code: 0239 Brand: STROMAB Model: CT 800 - CE Standard Cutting centre for beams, wood carpentry, wooden roofs, sawmill, balconies, and various - CE Standard Technical data Blade diameter mm 800 Motor power Hp 20 N° 5 axis controlled by programmer : Saw table rotation ( 0-340°) - Speed of the saw table rotation 9 sec. each 180° - Blade beveling from 90° to 45° (speed of the blade beveling 20 sec.) - Height of the blade above the table ( speed 15 sec. each 10 cm) - Beam positioning and measuring ( speed 17 mt/min) - Motorized positioning of the saw table compared to the saw fence mm 600 Photocell for the automatic reading of workpiece beginning Pair of vertical cylinders for cutting optimisation management Cutting capacity at 90° with single stroke: mm 280 x 290 / 250 x 390 / 200 x 450 At 90° with saw table sliding and repeted cut mm 280 x 770 / 250 x 840 At 45° with single stroke mm 200 x 210 At 45° with saw table sliding and repeted cut mm 200 x 760 Maximum ripping height mm 300 Cutting precision : +/- 2 mm on 10 mt beam (straight beam ) - +/-0,2° on rotation edge of the table - +/-0,2° on inclination angle of the blade Control by industry-standard PC Touch- Screen - Windows Operating System - USB ports - Ethernet Rollers: : Psdpsxv Su Asfx Adiord n° 3 idle rollers benches mt. 2 with rollers diameter 133 mm Widia blade diameter 800 mm Compressed air 6/7 bar Machine weight kg 2900 Total weight kg 3250 (Machine + roller benches)

Condition: reconditioned (used), Year of construction: 2001, DOUBLE lignum angle beveller OMG TR 2 DOUBLE lignum angle beveller Prodpfx Adelhr Ezsijd Double angle beveller lignum Invincibile ok super 350 mm Used 2001 To do: Double sided lignum beveller Model: Invincible around super 350mm Description: DOUBLE miter saw, double miter saw, 2 x 350 mm miter saw blades, sliding, rated power 21 amps, 50 Hz, 3-phase rotation on the blades 3000 l/min. Year of manufacture 2001. Very good condition Year: 2001

Condition: good (used), Year of construction: 1978, max. pitch circle 152 mm Number of teeth 8-50 St. weight 7500 kg Technical data – Min./max. foot cone angle: 15° / 55° – Pitch circle diameter: 152 mm – Max. tooth height with 21° finished broach head: 10.7 mm – Max. tooth width at tooth root with 21°: 28 mm – Broach head diameter: 200 mm – Number of teeth range: 8–50 – Max. broach head diameter: .21" Workpiece spindle – Diameter of the tapered bore at the wide end: 99.219 mm – Clamping length at 304.8 mm: 15.478 mm – Taper depth: 15.875 mm – Diameter of the entire spindle bore: 22.225 mm Maximum tooth height: 14.8 mm Maximum tooth width at the root: 28 mm Maximum root angle: 55° Minimum root angle: 15° Milling head speed: 32.6-49.7 m/min Feed speeds (seconds per tooth): 2-3.1 Index range: 8-50 mm Diameter of taper bore at large end: 99 mm Taper per foot: 15.4 mm Depth of taper: 15.8 mm Prjdsxq Hgcopfx Adisd Countersink behind the taper: 57.2 x 77.9 mm Diameter of the bore through the spindle: 22.3 mm Power of the main drive motor: 10 HP Rotation of the main drive motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the hydraulic motor (60 Hz/50 Hz): 1800/1500 rpm Rotation of the coolant pump (60 Hz/50 Hz): 3600/3000 rpm Rotation of the chip screw motor (60 Hz/50 Hz): 1800/1500 rpm Footprint (L x W): 320 x 221 cm Total weight of the 726 REVACYCLE machine: approx. 9 t

Condition: used, mileage: 20,553 km, power: 260 kW (353.50 HP), first registration: 09/2023, overall weight: 18,000 kg, fuel type: diesel, color: orange, axle configuration: 2 axles, gearing type: automatic, Equipment: ABS, air conditioning, all wheel drive, parking heater, Like-new municipal winter service truck: Mercedes-Benz Arocs 2235 4x4 all-wheel-drive tipper with 22 t gross weight, Meiller 3-way tipper body, and Meiller winter service hydraulics. Equipped with front mounting plate, additional winter service lighting, heated windscreen, differential locks on front and rear axles, automatic transmission, automatic climate control, reversing camera, and more. German vehicle, first owner, only 20,553 km. Latest Mercedes-Benz service performed in 10/2025. Wheelbase: 3,900 mm Unladen weight: 10,328 kg Payload at 18,000 kg GVW: 7,672 kg Payload at 22,000 kg GVW (Winter Service): 11,672 kg Weight variant: 20.5 t (9.0/13.0) Permissible total weight (winter service): 22,000 kg Increased front axle load for winter service: 10.5 t Front axle: 9.0 t straight, Rear axle: bevel gear 300, planetary 13.4 t Front springs: 10.5 t, 3-leaf, Rear springs: 13.0 t Meiller winter service hydraulics for plow and spreader Front mounting plate with hydraulic connections Winter service lighting Heated windscreen ClassicSpace M driver’s cab with rear window Additional thermal insulation Engine: OM936, R6, 7.7 l, 260 kW (354 hp), 1400 Nm, Euro 6 E Drive: 4x4 Differential locks front and rear axles Axle ratio i = 4.143 Meiller 3-way tipper, approx. 4.60 m long x 2.42 m wide Bulkhead height: 800 mm Side panels: 600 mm high Removable aluminum side panel extensions: 400 mm Lashing points in tipper platform floor Automatic transmission G 211-12/14.93-1.0 Mercedes PowerShift 3 Transfer case VG 3000-3W, 1.04 selectable PTO via engine-driven power takeoff Automatic climate control Auxiliary hot water heater AHK Maul Ringfeder D40 with air pressure connections Tipper hydraulics connections at rear Towing capacity: 30,000 kg Gross combined weight: 40,000 kg Front and rear axle leaf suspension Stabilizer for front and rear axles Electronic brake system with ABS and ASR High Performance Engine Brake Drum brakes Predictive Powertrain Control Cruise control Engine brake Reversing camera Sun visor 290-liter tank LED daytime running lights LED rear lights Fog lamps 2 rotating beacons at the rear above cab roof Pjdsxlwpkjpfx Adiord Rear work lights Exhaust stack behind cab Electrically adjustable and heated exterior mirrors Electric windows Comfort driver's air-suspended seat Central locking system with remote control Last Mercedes-Benz service in 10/2025 German vehicle from first owner Top maintained, like-new condition Price NET plus 19% VAT. Attractive financing available upon request. All details without guarantee. Subject to errors and prior sale. Internal vehicle number: 2577

Condition: used, mileage: 541,500 km, power: 115 kW (156.36 HP), fuel type: diesel, gearing type: automatic, axle configuration: 4x2, wheelbase: 3,620 mm, overall weight: 7,490 kg, empty load weight: 6,170 kg, maximum load weight: 1,320 kg, first registration: 05/2014, loading space length: 4,960 mm, loading space width: 2,460 mm, loading space height: 2,240 mm, emission class: euro6, color: white, driver cabin: day cab, suspension: steel, brakes: engine braking, tire size: 235/75R17.5, number of seats: 2, Equipment: ABS, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, immobilizer system, onboard computer, power assisted steering, seat heater, tail-lift, traction control, Vehicle location: incoming / in transit, ClassicSpace, Mercedes PowerShift 3, short cab, 1x comfort seat, seat heating, electric mirrors, heated mirrors, left electric window, right electric window, air conditioning, sun visor, cruise control, ABS (anti-lock braking system), traction control (ASR), chassis side panels, differential lock, fog lights, storage box, leaf suspension, lashing rails, underrun protection, right side door, roof hatch, aluminum tail lift, standing, diesel/electric refrigeration unit, green environmental badge. Wheelbase: 3620 mm Body: Kiesling refrigerated box with partition wall and fan for two-chamber use, right side door, Thermo King T600 refrigeration unit (diesel/electric) & 1-ton Sörensen tail lift 4.1t front axle, rear axle with 325 hypoid bevel gear, 6.2t, differential lock on rear axle, electronic brake system with ABS and ASR, disc brakes on front and rear axles, condensate monitoring for compressed air system, rear axle stabilizer for extremely high loads, front underrun protection made of steel, classic cockpit, pollen filter, PSM, communication interface (KOM), reversing warning system, ClassicSpace, economy drive program, Mercedes PowerShift 3, daytime running lights, high performance engine brake, driver airbag, ESP. All information subject to change as the vehicle is incoming! ACCESSORY SPECIFICATIONS WITHOUT GUARANTEE, subject to modifications, prior sale, and errors! Pedpexuwb Ejfx Adiord

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Predpfsxf T Atex Adiod

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, Single-sided laser and PU edge banding machine including workpiece return system Ligmatech Manufacturer: Homag Edge banding machine type: PROFI KAL 330/10/A6/L Return system type: ZHR05/L/115 Year of manufacture: 2013 - Laser activation unit Performance - PU65 application unit - Balti melting device - Feed rate 18-25 m/min - FK31/20-cycle Powertrim - FK31/F Feed rate: 15 – 25 m/min Workpiece thickness: 8 – 60 mm Minimum workpiece width: 60 mm Edge material (roll): 0.3 – 3 mm Edge material (strip): 0.4 – 20 mm Control: PC22 Control system: Powertouch Units and gluing Jointing cutter unit S2 Automatic horizontal adjustment for jointing cutter Automatic vertical adjustment for jointing cutter LaserTec activation unit Performance Basic gluing station A20, extension module Magazine extension for 6 rolls Freestanding horizontal roll plate Continuously adjustable edge pressure device Vacuum device for strip singulation Servo edge feed Edge thickness measurement for coiled material Quick-change system for application unit QA/PU PU65 application unit (interchangeable) Automatic glue dosage adjustment Balti melting device Automatic pressure zone adjustment Wetting system for pressure zone Release agent spraying unit top/bottom End trimming unit HL86 bevel/straight 0.22 kW servo Pneumatic adjustment for end trimming motor Automatic adjustment for end trimming stop Pre-milling unit BF20 Pneumatic adjustment for pre-milling unit Multi-milling unit MF21 servo Release agent spraying unit top Profile trimming unit FK31/20-cycle Powertrim Profile trimming unit FK31/F Multi-scraper MN21 servo with chip breaker Finishing unit FA11 top/bottom, consisting of Glue joint scraper Cleaning agent application top/bottom Buffing unit Pneumatic adjustment FA11 Additional equipment Psdpfx Aexgrfpjdijrd Edge banding of solid wood edges Automatic adjustment of infeed fence Infeed extension 500 mm Sliding carriage Scissor-type workpiece support Scissor extension Workpiece thickness 8 mm instead of 12 mm Potential-free contact Flexible edge sequence control software Set-up-in-the-gap Workpiece return system ZHR 05/L/115 Manufacturer: Ligmatech Year of manufacture: 2013 Workpiece parameters Length: min. 300 – max. 2500 mm Width: min. 60 – max. 1100 mm Thickness: min. 8 – max. 60 mm Weight: max. 50 kg Feed rate: 8 – 30 m/min

Condition: new, empty load weight: 2,980 kg, maximum load weight: 10,020 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Podpfx Adexf T Aasiord

Condition: new, empty load weight: 3,050 kg, maximum load weight: 9,950 kg, overall weight: 13,000 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, color: other, gearing type: other, driver cabin: other, emission class: none, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 900 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 550 ¤, , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Predpfx Adexf T A Toiod

Condition: new, empty load weight: 2,980 kg, maximum load weight: 7,520 kg, overall weight: 10,500 kg, axle configuration: 2 axles, loading space length: 6,280 mm, loading space width: 2,480 mm, suspension: steel, tire size: 245 / 70 R 17,5, wheelbase: 990 mm, color: other, gearing type: other, front tire size: 245 / 70 R 17,5, rear tire size: 245 / 70 R 17,5, driver cabin: other, emission class: none, fuel: biodiesel, Equipment: ABS, compressed air brake, each ramp approx. 2,700 mm long x 560 mm wide, ramps with gratings, loading height: 840 mm, 12 lashing eyes each 2.5 t, 8 x lashing eyes each 6 t, steel drop sides, foldable and removable, wooden planks 50 mm, loading area rear beveled, loading area width inside 2.480 mm, rear stanchion removable, front for through-loading, , Also available in 5,300 mm loading area length!!!, , Rental price from 500 ¤ , , -- Misprints, errors and omissions excepted, sample pictures --, More data under: !, More Details: ! Prjdpfsxr Dumsx Adied