Used Beveler for sale (518)

Condition: new, overall weight: 50,960 kg, maximum load weight: 39,670 kg, axle configuration: > 3 axles, Equipment: ABS, You can find our complete range of immediately and short-term available vehicles on our website. Extract from the equipment list. Full equipment details available on request. Gooseneck: * Gooseneck with hardwood flooring approx. 30 mm thick * Rear of gooseneck in straight design * 3 pairs of lashing rings (LC 5,000 daN) Loading Area: * Extendable loading area * 5 pairs of fold-out lashing rings to the outside (LC 5,000 daN) * 3 pairs of fold-out lashing rings to the outside (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * Cutouts in the outer frame of the loading area for attaching tension straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, checker plate covering over the axles Landing Legs: JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, two rigid axles, two self-steering axles * Air suspension with lift/lower function * Self-steering axles with electromagnetic reverse lock, activated via reverse gear or manually * Drum brakes * Axle tool kit Tyres: * 205/65 R 17.5 * Brand of our choice * TPMS tyre pressure monitoring system according to ECE R 141 * Data transfer to the tractor unit via the standardised EBS interface as per ISO 11992 * For correct display, the tractor unit must be able to transmit and display these data Brake System: * Brake system in accordance with EU regulations with EBS-E (4S3M) without connection lines to the tractor unit Hodpfx Asxarlvog Nsfn Steel Structure: * Steel construction made of high-strength fine-grain steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa) S690QL/S700MC (yield strength 690 MPa) Paintwork: * Complete steel structure automatically blasted after welding using a shot blast system * Second blasting with corundum for optimal coating adhesion * HRM metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for best corrosion protection * Final coating with 2 x 2K topcoat, solid colour in RAL 3002 Carmine Red, according to RAL system 841GL * Wheels in silver * Rear section metallised and painted in RAL 9010 (Pure White) * Metallic paint not available * Paint finish tested with salt spray test according to ISO 9227-NSS * Cavities sealed with special wax Electrical System: * Electrical system in compliance with EU regulations, 24 Volt ASPÖCK-NORDIK (ASS3) lighting * All LED side marker lights blink together with the indicator * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Accessories included: * 2-inch king pin * One spare wheel holder in front of the bulkhead * Yellow-red air couplings at the galvanised connection strip up front * Galvanised folding supports beneath the loading area bevel * One galvanised steel bulkhead (EN12642-XL), approx. 1,600 mm high * On the gooseneck, plug-in aluminium side and rear boards, approx. 2,440 x 400 mm (L x H) * The rear galvanised plug-in stanchions are removable (body length approx. 2,560 mm) * Support bracket with 1 pair of WADER container locks. Fifth-wheel load approx. 20,000 kg * 7 pairs of WADER container locks for 1x 20' container in the loading area * 1x 40' container in the loading area, 1x 40' container on the gooseneck, 2x 20' container * 7 pairs of stake pockets for 100 x 50 mm plug-in stanchions in the outer frame of the loading area * One galvanised bracket running across under...

Year of construction: 1992, condition: excellent (used), machine/vehicle number: 24, Kom.No.: 551.3852 Colours: 6 Equipment / Additional information: Consists of: • Stacker • Printing machine • Cup feeding • Stapler Technical data Printing unit type DW 200-230 Plate cylinder diameter 200 mm Max. possible print image width 110 mm Number of print segments 4 pieces Max. cup rim diameter 130 mm Min. cup rim diameter 70 mm (55 mm) Hedpjn D E A Tofx Ag Nofn Max. print image unwinding (specific plate unwinding) (361 mm) / D 115 Max. cup height 130 mm Min. cup height 35 mm Max. bevel 10 degrees Production speed depending on cup size, quality and raw materials with UV drying up to 24,000 C/h El. connection value (machine, drying and stacking) approx. 35 KVA El. control with Siemens PLC / control station with 2-line display

Condition: used, As good as new T – angular gear or bevel gear Tandler type O1-III made of steel with a gear ratio of 2:1. manufacturer number: 151227 Hfsdpfxsw Uhhkj Ag Njn width: 222 mm height: 190 mm Depth: 110 mm Relationship: 2:1 Waves: 22 x 6

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, Brand: SCM Model: OLIMPIC K 500 T/ER-2 - CE Automatic edge banding machine with edge sanding unit for processing edges made of wood, veneer, PVC, melamine, ABS – suitable for furniture manufacturing, joinery, custom fittings, panels, kitchen and bathroom furniture, and various other products. Technical data: Min./max. panel height: 8–60 mm Panel height with rounding unit: 10–45 mm Edge thickness: 0.4–8 mm Edge thickness in roll: 0.4–3 mm Minimum panel width: 55 mm Feed speed: 11 m/min Hjdpfx Agexnvr As Nefn Pressure beam with motorized vertical adjustment Panel support arm Sound-insulated safety cabin Fluid inlets Configuration: Anti-adhesive application unit with two nozzles – two separate tanks for anti-adhesive fluid Pre-milling unit with two high-frequency motors – diamond tools H64 mm – diameter 100 mm, F 30, h 65 – copying kit included VC 560 gluing unit for applying edging to panels up to 60 mm – glue pot capacity: 1.5 kg – interchangeable glue pot End cutting unit with two independent motors, each 0.35 kW at 12,000 rpm – motor tilt from 0° to 15° – 2 saw blades, 115 mm diameter – face copiers Tilting trimming/bevelling unit for trimming excess edging top and bottom – 2 motors of 0.55 kW each – 12,000 rpm – tilt from 0° to 25° – 2-position pneumatic quick-change kit for processing thin or radius edges Corner rounding unit with two motors on precision guides – enables rounding and trimming of thin and thick edges – 2 motors of 0.55 kW each – 12,000 rpm Edge scraping unit for optimal finishing of ABS/PVC edging with rotating tracing guides, extraction hood, and trimming waste cassette Glue scraping unit – removes glue residue from the lower and upper panel surfaces Brushing unit for cleaning and polishing plastic edges – motor 0.25 kW – brush diameter 150 mm Compressed air: 7 bar Overall dimensions: 5500 x 1150 x 1550 (H) mm Weight: 1,780 kg

Condition: excellent (used), TruTool PN 200 electric hand cutting machine Product features The new TruTool PN 200 vibrating shear is mainly used for cutting C-L-U sections, trapezoidal sheet metal, etc. components. The device with a short tool for processing sheet metal with a profile depth of up to 85 mm and for C-L-U sections. Also for corrugated sheet metal. Ideal for hard-to-reach places. The working direction can be adjusted 360° easily and without tools in 45-degree steps. Minimized set-up time Replacement of punch and yoke without interruption and without tools. Unmatched speed Fast and efficient, 2.1 meters per minute at 400 N/mm2 structural steel. Application: Trapezoidal sheet metal For cutting profiles up to 86 mm deep and 132.5 / 40 mm wide. For straight and diagonal cuts. Profiles For cutting C-L-U profiles. Corrugated sheet For cutting and slitting. For bevel cuts and internal and radial cuts. Hfodpfx Aeuhm E Sog Nen - MAXIMUM SHEET THICKNESSES: - MAXIMUM THICKNESS OF 400 N/MM² STEEL SHEET: 2 mm. - MAXIMUM THICKNESS OF STEEL 600 N/MM²: 1.5 mm - MAXIMUM THICKNESS OF STEEL SHEET 800 N/MM²: 1 mm - MAXIMUM THICKNESS OF SHEET METAL MADE OF ALUMINUM UP TO 250 N/MM²: 3 mm - RADIANCES: - LOWEST RADIUS: 50 mm - GENERAL INFORMATION: - OPERATING SPEED: 2.1 m/min. - NUMBER OF SHAKES AT NOMINAL LOAD: 1500 1/min. - INITIAL HOLE DIAMETER: 24 mm - RATED POWER CONSUMPTION: 550 W

Condition: new, functionality: fully functional, ATEMAG Function Line QUATTRO – CNC Aggregate Changer with 4 Outputs – New/Unused For sale is a brand new, unused CNC aggregate changer from the renowned manufacturer ATEMAG (Made in Germany). This is a Function Line QUATTRO unit with four outputs, ideal for machining centers from brands such as SCM, Biesse, Homag, Morbidelli, and others. Hsdpfsxbh A Tox Ag Njfn Technical data: Manufacturer: ATEMAG Model: Function Line QUATTRO (F-1110) Tool holder: SK30 Max. speed: 15,000 rpm Outputs: 4 Automatic tool change (ATC) Original operating manual and inspection protocol included Includes accessories (keys, pull studs, etc.) Condition: New / unused / in original packaging With measurement and inspection certificate

Condition: new, Year of construction: 2024, Edge Bander F4 Brand new machine Year: 2024 Edge banding machine with PLC control system (touchscreen included) and glue application system for edge materials up to 3 mm thick: - Pre-milling unit (with diamond tools) for up to 2 mm thick panels - Quick-heating glue pot with coated, maintenance-free interior - Pre-equipped for interchangeable glue pots (hot glue change system included) - High-frequency end trimming station (~12,000 rpm) - High-frequency milling station (~12,000 rpm) with independent pneumatic adjustment and reversible panel saw (combined execution) - Robust feed chain - Double-roller top pressure unit (on ball bearings) - Rear window for visibility - Extendable front support arm - Feed speed approx. 10 m/min OPTIONS ON STOCK MODEL: Hjdpfxoxf H Sno Ag Nefn - Quick-change device for corner milling unit (F4/08/4) - Nesting unit (for milling and radius scraper stations) (F4/27) - Pneumatic adjustment on three points (straight, bevel, radial cuts) (F4/30) - Internal LED lighting (F4/32)

Condition: new, Year of construction: 2024, Attention!! Special Offer!! Warranty inspection free of charge—only for Customers who have taken part in the demonstration at the machine showroom in Bydgoszcz. A part of our machines is available IMMEDIATELTY. Fiber Laser cutting machine FLV-3015-C2 3kW IPG / VF1530-3000W Specifications - Maximum sheet size: 3000 x 1500 mm - X/Y positioning accuracy: ±0.05 mm/m - X/Y positioning repeatability: ±0.03 mm Hfsdoh Hfgyepfx Ag Nsn - Maximum travel speed: 120000 mm/min - Maximum acceleration: 1.5 G - Motor power output: 3.0 kW - Source brand: Raycus or MAX Photonics to choose from - Input voltage: ~3×400 V 50 Hz - Ingress protection rating: IP54 Cutting thickness - Carbon steel: recommended thickness 20.0 mm, maximum thickness 22.0 mm - Stainless steel: recommended thickness 8.0 mm, maximum thickness 10.0 mm - Aluminum: recommended thickness 6.0 mm, maximum thickness 8.0 mm - Brass: recommended thickness 5.0 mm, maximum thickness 6.0 mm Structure The machine is very stable due to its welded structure on massive legs. Fuji Japanese servo drives with robust bevel rack and pinion drive ensure high speed and exceptional accuracy of the cutting head. The ABL system automatically replenishes the grease in the rails. RayTools cutting head with auto-focus. Control panel The control of the fiber laser occurs is carried out via the control panel with keyboard and mouse. The computer includes the Windows system and CypCut software, which comes with functions such as: - part programming, - file import and export, - adjustment of power output and cutting speed. Installed software has lifetime licenses Wireless remote The control of the laser head is carried out by a wireless remote control. Assistance by a specialist We strive to maintain constant communication with our Customers. To support this, each purchased machine includes a Specialist Assistance Package with dedicated hours of expert guidance. Within the service, our technicians may: - Prepare or redesign CAD drawings, - Advise on material and gas selection, - Assist in the selection of operating parameters for different materials. The remaining time can be checked in the Otinus Customer Panel. Free drawing package Each Otinus laser cutter includes a comprehensive set of ready-to-use CAD drawings. The designs included are ready-made as they can be immediately cut in any format. Our technician will show you how to do that during training. The drawings will be useful to anyone who wants to make various types of decorative items. Technical Consultation Our specialists help select the right machine and accessories based on technical drawings of the parts you plan to produce. Price-included 2-day training including installation of the machine - 1 day up to 8 hours - installation of the machine and learning to use the controller. - 2 days up to 8 hours - independent work under the supervision of our technician - possibility of programming specific details that are made by the Client. Consultation with a specialist - Telephone: 7.30 a.m. to 9 p.m. (Mon-Sat) - time package of 8 hours to be used within 12 months. Online: from 7.30 a.m. to 2.30 p.m. (Mon-Fri) - time package of 8 hours to be used within 12 months. Access to Otinus Academy courses - LibreCad - 12-month access In addition, you will receive - CAD drawing package

Condition: good (used), Gear motor, electric motor, electric gear motor, bevel gear motor -Manufacturer: Nord, gear motor -Type: SK 4282AZ-132 S/4 i = 9.23 -Speed: 158 rpm -Engine: Nord Type SK 132 S/4 -Power: 5.5 kW / 1450 rpm -Hollow shaft: Ø 50 x 195 mm Hfodpst E D Hpsfx Ag Non -Protection class: IP55 -Dimensions: 630/320/H450mm -Weight: 104 kg

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Kronos KR25SP Automatic gantry CNC Thermal cutting systems for large plates Hfedpfxjv Iaqys Ag Nen Plate size ( max.MM ) 2540 x 6000 Plate thickness with plasma ( max.no.) 50 Plasma straight torches ( max.no) 1 Plasma bevel torches ( max.no.) 1 Plate thickness with oxy-fuel ( max.no.) 150 Oxy-fuel-fuel torches [max.no.] 4 Machine weight [kg] 2500 This machine has been completely cleaned and checked. For more information, please contact us.

Condition: used, mileage: 406,039 km, power: 380 kW (516.66 HP), first registration: 03/2016, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 13,800 kg, empty load weight: 12,200 kg, next inspection (TÜV): 02/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 2,550 mm, total width: 3,470 mm, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace, Mercedes PowerShift 3, crew cab, 2x comfort seat, seat heating, electric mirrors, heated mirrors, electric window left, electric window right, air conditioning, sun visor, radio-CD, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, high-beam headlights, work lights, beacon, tool box, leaf/air suspension, last axle liftable and steerable, trailer coupling air+electric, aluminum tank, underride guard, hydraulic transverse lock, roof hatch, green emission sticker. Wheelbase: 4500 mm. Body: 20t Marrel MA 26.70 hooklift system for containers up to 7 m. Front axle: 8.0 t. Rear axle: hypoid, 13.0 t, bevel gear 485. Trailing axle: 9 t, steered, relievable, liftable. Disc brakes on front and rear axles. Driver and passenger comfort air suspension seats, leather, high storage compartment on engine tunnel, remote control for air suspension, illuminated Mercedes star, S cab ClassicSpace, 2.30 m, tunnel 170 mm, central locking with 2 keys, PowerShift 3 transmission G 281-12/14.93-1.0, 12.7 cm instrument cluster with additional displays, Bluetooth® radio/navigation system, comfort package, 2-way speaker system. Fuel tank: 510 l, left side, 650 x 700 x 1300 mm, aluminum. Bi-xenon headlights, headlight cleaning system, fog lights, LED daytime running lights, LED rear lights. Engine: OM473, inline 6, 15.6 l, 380 kW (517 hp), 2600 Nm, Euro VI version 2, engine brake standard system NA MB 131-2c, hydraulic pump ISO 7653D, standard trailer coupling D40 Ringfeder. Electronic Stability Program (ESP), lane departure warning, attention assist, Active Brake Assist, cruise control. Hsdpfoxbfx Eex Ag Nefn Overall length: 8,550 mm – 9,450 mm Width: 2,550 mm Height: 3,470 mm Refurbished engine approx. 100,000 km, original Mercedes installation in 04/2021! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to change, prior sale and errors excepted.

Condition: new, functionality: fully functional, We offer a high-quality low-speed pellet granulator. The pellet mill is 100% manufactured at our ECOMAS Polska Czernikowo facility. We guarantee equipment engineered for continuous 24/7 operation. Our machines produce pellets that comply with EU standards—properly compacted, free from harmful additives, and with a calorific value of at least 4.6 kWh/kg. The main advantage is the use of modern, hardened dies and rollers (60HRC+), manufactured using CNC technology. Our dies ensure high output, low energy consumption, and long service life for both dies and rollers. Another benefit is the main shaft lubrication system featuring oil and oversized bearings, which significantly reduces wear! Are you struggling with your current granulator—frequent bearing failures, low efficiency, die blockages, high energy consumption, fast wear of parts, etc.? With our machines, these problems are eliminated. We provide a tailored approach to every customer! See our machines in action by searching YouTube for: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW, up to 55kW. Configuration: - Complete head with 2/3/4/5 rollers on cylindrical bearings - Welded body—completely filled with Orlen Oil Transol VG 320 - Cylindrical-bevel gearbox (98% efficiency) Hfsdpoxk Ta Njfx Ag Nsn - Base frame - Bolted dies: Ø230, Ø260, Ø285, Ø310, Ø400, Ø520; hole diameters: 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - Standard oil tank or optional tank with pump and oil system (oil lubrication, easy oil change) - User manual - 12-month warranty The buyer receives a comprehensive operating manual and a one-year warranty. We offer full warranty and post-warranty support. Prices listed below in the attached PDF file. *Product and technical solutions are protected.

Condition: new, overall weight: 48,000 kg, maximum load weight: 37,075 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You will find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. The following is an excerpt from the specification. Full specification available upon request. Gooseneck: - Gooseneck with beveled front corners approx. 45°, rear taper approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading Platform: - Platform hydraulically liftable and lowerable after the gooseneck, approx. 2,800 mm long - Rear taper approx. 1,000 mm x 8° - 6 pairs of folding external lashing rings (LC 5,000 daN) - 2 pairs of folding external lashing rings (LC 10,000 daN) - 1 pair of internal folding lashing rings at the front center beam (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) - Grating floor C40/4 (point load approx. 2.3 t on approx. 20 x 20 cm) - Over axles checker plate covering Two-piece steel ramps: - One pair of galvanized two-piece steel ramps, approx. 2,750 + 1,400 x 800 mm - With gratings C40/4 (point load approx. 2.2 t on approx. 20 x 20 cm) - Ramp with hydraulically foldable ramp sections - Hydraulic lifting frame, hydraulically repositionable - Max. load per pair: approx. 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps shorter than 300 mm do not have to be included in the vehicle length in driving position Landing Gear: - JOST landing gear Axles: - BPW axles and suspension - 2 rigid axles, 1 self-steering trailing axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock activated by reverse gear and manual switch - Air suspension with lifting and lowering valve - Axle tool kit Brake System: - WABCO braking system in accordance with EU regulations, with EBS-E (2S2M), without connecting lines to the tractor unit Tyres: - 235/75 R 17.5 3PMSF tyres – make at our discretion - TPMS tyre pressure monitoring system compliant with ECE R 141. Data transmission to the towing vehicle via standard EBS interface acc. to ISO 11992. To display the data correctly, the towing vehicle must be able to process and show this data. Steel Construction: - High-strength fine-grain steel construction - Steel grades: S355J2+N / S355MC Electrical System: - Electrical system in accordance with EU requirements - 24 volt lighting, ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at the front connector rail with 24N, 24S & 15-pin sockets Hsdpfxjw Tprns Ag Nsfn Paintwork: - Complete steel structure is automatically shot-blasted after welding via turbine blasting machine - Second round of blasting with corundum for optimum coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection - Final coating with 2 layers of 2K topcoat, single color RAL 3002 carmine red - Rims painted silver grey - Rear section metallized and painted in RAL 9010 pure white - Metallic paint not available - Paint system tested in salt spray test according to ISO 9227-NSS - Cavity sealing with special wax Included accessories: - 2 inch king pin - One galvanized steel front wall, approx. 400 mm high - Galvanized folding supports under the loading platform taper - Rear mounting bracket for beacon light - Grating covering in the gooseneck ramp taper C30/3 (point load approx. 2 t on ...

Condition: used, functionality: fully functional, Year of construction: 2018, load capacity: 1,400 kg, empty load weight: 390 kg, drive type: Keine, Cellulose/Bale Clamp Load Center: 500 mm ISO Class: ISO Class 2 = 1,000 - 2,500 kg Mast Type: None Technical Condition: Very good Description: Model 1.5T413, sideshift +/- 100 mm, sideshift independent of the opening range, overall width 970 mm, opening range 495 - 1675 mm, arm height 440 mm, arm length 1,000 mm, arm smooth on the outside, inside fitted with round bar, arm tips bevelled, load capacity 1,400 kg at 500 mm load center, front dimension 158 mm, center of gravity at 289 mm, weight approx. 390 kg, includes pressure gauge, ISO - Class 2 A connection. Hfedpfx Agswti E Nj Non

Condition: ready for operation (used), Year of construction: 2011, functionality: fully functional, CNC bevel gear milling machine with spiral bevel gearing Gleason No 631 Year of manufacture: 2011 Control: SIEMENS 840d Hedpow Tfb Sjfx Ag Nofn The machine was completely overhauled in 2011. A new control system and drives were installed.

Condition: good (used), Year of construction: 2002, max. wheel diameter 275 mm gear width 55 mm max. module 6 min. module 1 Control 840 C Siemens Hfodpjtumrpsfx Ag Non total power requirement 100 kW weight of the machine ca. 16,7 t dimensions of the machine ca. 5,2 x 2,3 x 2,4 m m

Condition: used, mileage: 232,627 km, power: 380 kW (516.66 HP), first registration: 10/2018, overall weight: 26,000 kg, fuel type: diesel, color: orange, axle configuration: 6x2, maximum load weight: 13,970 kg, empty load weight: 12,030 kg, next inspection (TÜV): 09/2026, wheelbase: 4,500 mm, brakes: engine braking, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 2,550 mm, total width: 3,700 mm, number of seats: 2, Equipment: ABS, additional headlights, air conditioning, cabin, central locking, cruise control, differential lock, electronic stability program (ESP), fog lights, onboard computer, power assisted steering, seat heater, traction control, trailer coupling, Vehicle location: Bovenden. ClassicSpace cab, Mercedes PowerShift 3, company-owned, 2x comfort seats, seat heating, electric mirrors, heated mirrors, electric window (left and right), air conditioning, sun visor, radio CD, cruise control, air horn, ABS (anti-lock braking system), traction control (ASR), constant throttle, PTO, differential lock, fog lights, high beam headlights, work lights, rotating beacon, storage box, leaf/air suspension, last axle liftable and steerable, trailer coupling with air and electrical connections, aluminum tank, underrun protection, hydraulic transverse locking, roof hatch, green environmental badge. Wheelbase: 4,500 mm. Body: 20t Marrel AL20S56 hooklift system for containers up to 6.8m. Front axle: 8.0 t, rear axle: bevel gear 485, hypoid, 13.0 t, trailing axle: 9 t, steered, unloadable, liftable. Disc brakes on front and rear axles. Driver and passenger air-sprung comfort seats, leather, high storage on engine tunnel. Cable remote control for air suspension. Illuminated Mercedes star. ClassicSpace S-cab, 2.30 m wide, tunnel 170 mm. Central locking with 2 keys. Mercedes PowerShift 3, transmission G 281-12/14.93-1.0. 12.7 cm combined instrument cluster with additional displays. Radio/navigation system Bluetooth®, comfort, 2-way speaker system. Tank: 510 l, left, 650 x 700 x 1300 mm, aluminum. Bi-xenon headlights, headlamp cleaning system, fog lamps, LED daytime running lights, LED rear lights. Engine: OM473, inline-6, 15.6 l, 380 kW (517 hp), 2,600 Nm, Euro VI, version 2. Engine brake, standard system, NA MB 131-2c, pump, rear engine PTO, hydraulic pump ISO 7653D. Standard trailer coupling D40, Ringfeder. Stability Control (ESP), Lane Keeping Assist, Attention Assist, Active Brake Assist, cruise control. Total length: 8,550 mm - 9,450 mm Width: 2,550 mm Height: 3,700 mm Accessories listed without guarantee. Changes, prior sale, and errors excepted! Hfsdpfxjxbfx Ss Ag Njn

Condition: new, overall weight: 48,000 kg, maximum load weight: 33,865 kg, axle configuration: 3 axles, Equipment: ABS, You can find our complete range of vehicles, including those available for immediate delivery or on short notice, on our website. Below is an excerpt from the specification. The full equipment list is available upon request. Gooseneck: * Gooseneck with front corners chamfered approx. 45° and a rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring approx. 30 mm thick Load area: * Double extendable design with rear bevel approx. 500 mm x 8° * 6 pairs of folding external lashing rings (LC 5,000 daN) * 4 pairs of folding external lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading area (LC 10,000 daN) * 1 intermediate table approx. 250 mm * Hardwood flooring approx. 48 mm thick, over axles with checker plate covering * Cut-outs in the external frame of the loading platform for attaching tie-down straps (LC 2,000 daN) Axles: * BPW axles and suspension, all axles forced-steered hydro-mechanically * Design axle load: 12,000 kg each * Air suspension with lift and lower valve * Axle tools included Tyres: * 245/70 R 17.5, load index (146/146 F) * Brand of our choice Landing legs: * JOST mechanical landing legs with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Braking system: * Braking system according to EU regulations with EBS-E (2S2M) without connection lines to the tractor unit Paintwork: First-class and durable corrosion protection * High-quality, one-colour 2-component (2K) topcoat in RAL 3002 carmine red * Rear section metallized and coated in RAL 9010 (pure white) Steel Structure: Steel construction from high-strength fine grain steels. * Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: * Electrical system according to EU regulations * 24 Volt lighting ASPÖCK-NORDIK (ASS3) * ASPÖCK-UNIBOX at the front connection strip with 24N, 24S & 15-pin sockets, compliant with ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098 Including the following additional equipment: * 2-inch kingpin * Galvanized steel front wall, approx. 400 mm high Hfsdpfx Aew Tprzjg Njn * Yellow-red air couplings at the galvanized front connection strip * Spare wheel carrier in front of the front wall * Electro-hydraulic unit * Rear and front steering via cable remote control with push-buttons, with single-track monitoring of the axles (without installation in the tractor unit) * Mount at the rear of the gooseneck for aluminum loading ramps * Removable aluminum ramp hanging rail at the rear of the vehicle * Galvanized folding supports beneath the slope of the load area * On the gooseneck: plug-in aluminum side boards and rear board, approx. 2,440 x 400 mm (L x H) * The rear galvanized stanchions are removable (body length approx. 2,560 mm) * One galvanized toolbox, integrated in the chamfered gooseneck * 4 pairs of WADER container pockets in the loading area for one 20', two 20', one 40' or one 45' container * 8 pairs of stanchion pockets (approx. 100 x 50 mm) in the external frame of the loading platform * Galvanized extensions, extendable by approx. 230 mm per side * Adjustable hanging rails for aluminum ramps at the rear of the vehicle * 2 pairs of ferry rings under the gooseneck and 2 pairs at the rear * Central lubrication system with 2 BEKAMAX (Pico) pumps, filled with standard grease NLGI-2 and removable pump guard * 2 LED reversing lights mounted on the rear panel * HRM Metallization (High Resistance Metallisa

Condition: new, overall weight: 45,000 kg, maximum load weight: 36,245 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available for immediate and short-term delivery, on our website. Excerpt from the equipment list. The full list of features is available upon request. Loading Platform: * Hardwood loading platform with rear bevel approx. 1,000 mm x 8° * 2 pairs of lashing rings (LC 5,000 daN) * 1 pair of lashing rings (LC 10,000 daN) * 6 pairs of outward-folding lashing rings (LC 5,000 daN) * 2 pairs of outward-folding lashing rings (LC 10,000 daN) * Cut-outs in the outer frame of the loading platform for attaching tension straps (LC 2,000 daN) Landing Legs: * JOST landing legs (mechanical) with 2-speed gearbox for approx. 24 t lifting capacity (approx. 50 t test load) Axles: * BPW axles, air-suspended * Disc brakes (approx. 377 mm) * Lift/lower function (ET 120) * Axle tool kit Tyres: * 435/50 R 19.5 tyres – brand at our discretion Hedpfjw Tpqqex Ag Nofn * TPMS tyre pressure monitoring system according to ECE R 141. Data transfer to the tractor unit occurs via standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data. Braking System: * Wabco braking system according to EU regulations with EBS-E (2S2M) without connecting lines to the tractor unit Steel Structure: * Steel construction made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355 MPa); S690QL/S700MC (yield strength 690 MPa) Electrical System: * Electrical system according to EU regulations * 24V ASPÖCK-NORDIK lighting (ASS3) * All LED side marker lights flash with the indicator * ASPÖCK-UNIBOX on the front connection bar with 24N, 24S, & 15-pin sockets according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Painting: * Complete steel structure blasted automatically with a shot blasting machine after welding * Second blasting with corundum for optimal coating adhesion * HRM-metallization of the entire chassis with ZINACOR 850 (85% zinc/15% aluminum) for maximum corrosion protection * Final painting with 2 coats of 2K finish paint, single color in RAL 3002 Carmine Red according to RAL system 841GL * Rear section metallized and painted in RAL 9010 (Pure White) * Paint system tested in salt spray test according to ISO 9227-NSS * Cavities sealed with special wax * Metallic paint not possible Including the following additional equipment: * Yellow-red air couplings on the galvanized front connection bar * 4 wheel chocks with holders * 2" kingpin * Loading platform with heavy-duty hardwood floor * 1 spare wheel holder under the loading platform, right-hand side in the direction of travel * Galvanized folding supports under the loading platform's beveled section * 9 pairs of stanchion sockets for plug-in stanchions, approx. 100 x 50 mm, in the outer frame of the platform * One galvanized steel front wall (EN12642-XL), approx. 1,600 mm high * Anti-slip painted sand layer on the central beam * 1 INOX toolbox transversely mounted under the platform, approx. 1,000 x 400 x 2,500 mm * 6 pairs of WADER container pockets in the floor for 1x 20' container, 2x 20' containers or 1x 40' container * 3 pairs of crosswise stanchion socket strips in the platform for plug-in stanchions approx. 100 x 50 mm * Storage for max. 9 pairs plug-in stanchions, approx. 100 x 50 mm, bolted to inner front wall * 2 INOX toolboxes under the platform left and right, approx. 600 x 350 x 600 mm * Holder for aluminium loading ramps, transverse under the pla

Condition: new, overall weight: 48,000 kg, maximum load weight: 38,140 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from equipment. Full equipment details available on request. Gooseneck: - Gooseneck with front corners chamfered approx. 45° and rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring, approx. 30 mm thick Loading area: - Telescopic loading area with rear incline approx. 1,000 mm x 8° - Between 1st and 2nd axle: one pair of fixed wheel recesses, approx. 1,610 x 970 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized cover over wheel recesses (width approx. 670 mm – max. point load 5 t / pc.) - 1 pair of flat lashing rings at the front of the loading area (LC 10,000 daN) - 4 pairs of outward folding lashing rings (LC 5,000 daN) - 3 pairs of outward folding lashing rings (LC 10,000 daN) - Cutouts in the outer frame for attaching tie-down straps (LC 2,000 daN) Landing legs: - JOST landing legs (manual) with 2-speed gearbox for 24 t lifting capacity (50 t test load) Tyres: - Tyres 235/75 R17.5 3PMSF, make at our discretion - TPMS tyre pressure monitoring system in accordance with ECE R 141 - Data transfer to the towing vehicle via standardised EBS interface as per ISO 11992 - For correct display, the towing vehicle must be able to receive and display this data Axles: - BPW axles and suspension, 2 axles rigid, 3rd axle self-steering - Technical axle load: 12,000 kg - Electromagnetic reverse lockout activated automatically when reversing and manually - Air suspension with lifting and lowering valve. Axle tools Braking system: - WABCO braking system according to EU regulations with EBS-E (2S2M) without piping to the tractor unit Electrical system: - Electrical system per EU regulations - LED lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lights flash with the indicator - ASPÖCK-UNIBOX at front connection strip with 24N, 24S & 15-pin sockets, according to ISO; 24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098 Steel construction: - Steel structure made of high-strength fine-grained steels - Steel qualities: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Paintwork: - Complete steel structure automatically shot-blasted after welding in a wheel-blasting system - Second shot-blasting with corundum for optimum coating adhesion - HRM metallization of entire chassis with ZINACOR 850 (85% zinc/15% aluminium) for maximum corrosion protection - Final painting with 2 layers of 2K topcoat, single-colour in RAL 3002 Carmine Red, rear section metallized and painted in RAL 9010 Pure White - Metallic finish not available Hedpfxjw Tpq Do Ag Nsfn - Paint structure tested in salt spray test according to ISO 9227-NSS - Internal cavities sealed with special wax Including the following accessories: - On the gooseneck and rear, left and right, one holder for warning signs each, including socket - Spare wheel holder in front of the front wall (without spare wheel) - 2-inch king pin - Galvanized steel front wall, approx. 400 mm high - Yellow-red air couplings on the galvanized front connection bar - Galvanized folding supports under the inclination at the rear of the loading area - A hardwood crash protection strip at the rear wall from gooseneck to the loading area - 1 pair of recessed lashing rings along the central beam at the rear inclination (LC 10,000 daN) - Aluminium drop sides and tailgate on the gooseneck

Condition: new, overall weight: 48,000 kg, maximum load weight: 37,820 kg, axle configuration: 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and soon-available vehicles on our website. Excerpt from the equipment features. Full equipment list available on request. Gooseneck: - Gooseneck with chamfered front corners approx. 45° and with rear bevel approx. 750 mm x 10° - 3 pairs of lashing rings (LC 5,000 daN) - Hardwood flooring approx. 30 mm thick Loading area: - 1 pair of fixed wheel recesses in front of the axles, approx. 2,610 x 970 x 400 mm (L x W x D) - Wheel recesses with 15 x 15 mm square climbing strips and lower area widenings - Between the 1st and 2nd axle one pair of fixed wheel recesses, approx. 1,610 x 700 x 400 mm (L x W x D) - Incl. 3-piece removable galvanized covers for wheel recesses (W approx. 670 mm) – max. point load approx. 5 t/each Hodpow Tpqwofx Ag Nefn - Lowering in the chamfer and extending into the loading area for excavator bucket stick accommodation (approx. 2,900 x 750 x 210/290 mm [L x W x H]) - 1 pair of horizontal lashing rings at front of loading area (LC 10,000 daN) - 5 pairs of fold-out lashing rings (LC 5,000 daN) - 3 pairs of fold-out lashing rings (LC 10,000 daN) - 2 pairs of lashing rings in the excavator stick recess (LC 5,000 daN) - Cut-outs in the outer frame of the loading area for attaching tie-down straps (LC 2,000 daN) One-piece steel ramps: - One pair of galvanized, one-piece steel ramps, approx. 3,000 x 800 mm, with approx. 48 mm thick hardwood surface - Ramps with hydraulic lifting mechanism, hydraulically movable - Maximum load per pair: 40,000 kg - In accordance with Regulation 1230/2012/EU, ramps less than 300 mm in length do not need to be considered part of the vehicle length in driving position Landing legs: - JOST landing legs (mechanical) with 2-speed gearbox, load capacity approx. 24 t (test load approx. 50 t) Axles: - BPW axles and suspension, 2 rigid axles, 1 self-steering axle - Technical axle load: 12,000 kg each - Electromagnetic reverse lock, activated via reverse gear and manually - Air suspension with lift and lowering valve - Axle tool Tyres: - Tyres 235/75 R 17.5 3PMSF – brand at our discretion - TPMS tyre pressure monitoring system according to ECE R 141. Data transmission to the tractor unit via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be capable of transmitting and displaying this data Braking system: - WABCO braking system compliant with EU regulations with EBS-E (2S2M), without connecting lines to the tractor unit Steel structure: - Steel construction made from high-strength fine-grained steels - Steel grades: S355J2+N/S355MC (yield strength 355 MPa), S690QL/S700MC (yield strength 690 MPa) Electrical system: - Electrical system in accordance with EU regulations - Lighting 24 Volt ASPÖCK-NORDIK (ASS3) - All LED side marker lamps flash with the turn signal - ASPÖCK-UNIBOX at the front connection bar with 24N, 24S & 15-pin sockets according to ISO (24N ISO-1185, 24S ISO-3731, 15-pin ISO-12098) Paintwork: - Complete steel construction is automatically shot-blasted after welding using a blast wheel system - Second blasting with corundum for optimum coating adhesion - HRM metallization of the entire vehicle chassis with ZINACOR 850 (85% zinc / 15% aluminum) for optimum corrosion protection - Final coating with 2 layers of two-component topcoat, single color in RAL 3002 Carmine Red, according to RAL System 841GL - Rims in silver - Rear section metallized and in RAL 901

Condition: new, overall weight: 30,000 kg, maximum load weight: 23,800 kg, axle configuration: 3 axles, total width: 2,550 mm, Equipment: ABS, You can find our complete vehicle inventory with immediately and short-term available units on our website. Selection of equipment features. Full equipment specification available on request. Weights: * Permissible gross weight: 24 t * Technical gross weight: 30 t Dimensions: * Approx. 2,100 mm = raised front platform incl. gooseneck, corners beveled * Approx. 5,350 mm = low-bed deck – level loading area * Approx. 850 mm = rear ramp slope * Overall width approx. 2,550 mm (or up to approx. 3,000 mm with extensions) * Loaded loading height approx. 870 mm * When assembling a combination, please observe the legally permitted overall height and total length. Frame: * Steel welded construction with front gooseneck and rear bevel * Rear ramp slope with central excavator shovel recess = rear recess between longitudinal beams, approx. 2,300 mm long * Integrated in the outer frame: 5 pairs of approx. 4 t lashing points (4x in the low-bed, 1x on the raised platform) * 7 pairs of recessed, pull-out 10 t lashing rings (4x in the low-bed, 1x on the ramp slope, 2x on the raised platform) * Standard ball bearing turntable Frame Attachments: * Both sides of the low-bed deck with extendable width extensions with approx. 50 mm softwood planks (track width of construction machinery to be transported must not exceed the outer frame width of approx. 2,550 mm) Hfedpjwx Dcyefx Ag Nsn * 4 pairs of folding approx. 10 t lashing rings, distribution: 1 pair at the front on the raised platform, between the longitudinal beams; 1 pair at the very rear in the excavator shovel recess, left and right; 1 pair at the front of the raised platform before the gooseneck, between the longitudinal beams; 1 pair in the rear low-bed ahead of the ramp slope, in the shovel recess left + right Towing Device: * Fixed drawbar with swivel towing eye approx. 40 + 50 mm, cranked version, silent bush mounting, drawbar retaining spring with tensioner * Truck coupling height approx. 830 mm to approx. 1,030 mm * Drawbar length approx. 1,800 mm Support Device: * 2 automatic folding supports at the rear Axles: * 3 SAF air suspension low-loader axles with drum brakes * Load capacity: 11 t per axle * S-cam drum brakes approx. 300/200 mm * Automatic brake slack adjusters Wheels: * 12 tires 235/75 R 17.5, 141J, brand per factory selection * 12 steel rims 6.75 x 17.5, with preset offset, silver Brake System/Suspension: * Dual-line compressed air brake system according to ECE directive R13 * Brake system by Wabco * EBS system 4S3M, 1st and 2nd axles with sensors * RSS/RSP – stability control * Spring-actuated parking brake on 2nd and 3rd axles * Steel air tank * Brake/air supply lines with two single coupling heads, yellow/red * EBS/ABS connection cable * Retainer rubber for EBS and electrical connectors * Air suspension with lift and lowering device (rear axles only), automatic ride height adjustment from 15 km/h (RTR), front axle mechanical stop Floor: * Approx. 50 mm impregnated softwood flooring, protruding approx. 5–10 mm above upper edge of frame, steel checker plate cover over the wheels Ramps: * 2 foldable single-piece lightweight steel drive-on ramps, approx. 2,800 mm long, approx. 750 mm wide, with impregnated hardwood inserts approx. 35 mm * Ramp spacing adjustable from approx. 350 mm up to max. total width of approx. 3,000 mm * Ramps lockable in driving position by chains with tensioners * Ramp lifting aid with spiral spring * Ramps laterally adjustable manually with bar * Square ribs welded on the

Condition: new, overall weight: 40,000 kg, maximum load weight: 30,860 kg, axle configuration: > 3 axles, total width: 2,550 mm, Equipment: ABS, You will find our complete vehicle inventory, including vehicles available immediately and at short notice, on our website. Excerpt from the equipment features. Complete equipment details available upon request. Frame: * Steel welded construction with front frame drop, beveled front corners and rear taper, drive-on slope with central excavator bucket recess = rear depression between the longitudinal beams, approx. 2,300 mm long * Integrated into the outer frame: 4 pairs of approx. 4t lashing brackets, 7 pairs of recessed, retractable approx. 10t lashing rings (2x on the raised deck, 1x in the front angled drop, 3x in the low bed between the wheel recesses, and 1x in the drive-on slope) 2 pairs of wheel recesses: * 1 pair of wheel recesses, approx. 2,300/1,270 x 400 mm (L1/L2 x D), located behind the front drop including one-piece drive-over aluminum cover, for a max. surface load of approx. 11,650 daN each * 1 pair of wheel recesses, approx. 1,390/590 x 270 mm (L1/L2 x D), located between the 3rd and 4th axles with one-piece drive-over aluminum cover, suitable for transporting wheel loaders with wheelbase approx. 2,700 – 3,600 mm and wheel diameter approx. 1,485 – 1,740 mm * Rear wheel loader overhang max. 2,220 mm * Width between wheel recesses approx. 1,255 mm (= outer/outer longitudinal beams) * Reinforced slewing ring bearing for total weight 44 t Frame attachments: * 5 pairs of receptacle pockets in the outer frame for square tube posts approx. 100 x 50 x 5 mm (3x in the low bed and 2x on the raised deck) * 4 pairs of foldable approx. 10t lashing rings, arranged as follows: 1 pair at the front on the raised deck, inside the longitudinal beams; 1 pair at the very rear in the excavator bucket recess left and right; 1 pair at the front of the raised deck before the frame drop, inside the longitudinal beams; 1 pair at the rear of the low bed before the drive-on slope, in the excavator bucket recess left and right Towing device: * Fixed drawbar with approx. 50 mm heavy-duty towing eye, cranked design, silent bushing mounting, drawbar retainer spring with adjuster Hfjdpfswx Ddqsx Ag Nen * Truck coupling height from approx. 775 mm to approx. 975 mm * Drawbar length approx. 1,800 mm Support device: * 2 hydraulic support legs at the rear – individually operated, controls housed in separate stainless steel box Axles: * SAF air-suspension low-loader axles with drum brakes, load capacity approx. 11t/axle * S-cam brake approx. 300/200 mm * Automatic brake adjusters Wheels: * 16 tires, 245/70 R 17.5, 146/146F, Conti HTR2 brand * 16 steel rims 6.75 x 17.5, offset, painted black * Black plastic lug nut covers Brake system/Suspension: * Two-line compressed air brake system per ECE regulation R13 * Brake system brand: Wabco * EBS system 4S3M, 1st + 3rd axle monitored * RSS/RSP – Stability program * Spring-loaded parking brake on 3rd + 4th axle * Aluminum air tanks * Brake/air connection lines with 2 single coupling heads, yellow/red * EBS/ABS connection cable * Elastic strap as holder for EBS and electrical plugs * Air suspension with lifting and lowering device, each operated separately front and rear; automatic ride height reset at 15 km/h Floor: * Softwood flooring approx. 50 mm, impregnated, projecting approx. 5 – 10 mm above frame upper edge * Steel checker plate cover over rear wheels Ramps: * 2 folding two-piece steel drive-on ramps, hydraulically extendable, gradient approx. 10 degrees, length approx. 2,750 + 1,350 mm, width approx. 800 mm, with hardwoo

Condition: new, overall weight: 65,000 kg, maximum load weight: 50,400 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including units available immediately and at short notice, on our website. Excerpt from the equipment list. Full equipment specifications available on request. GOOSENECK Hedpfjtx Nwnox Ag Njfn * Gooseneck in SNT design to optimize loading platform length, approx. 3,700 mm long, with rear bevel approx. 1,000 mm x 10° * For tractor units: 4 x 2, 6 x 2, and 6 x 4 * Removable steel front wall, approx. 400 mm high * ASPÖCK-UNIBOX on the front connector strip with sockets * 3 kW electro-hydraulic unit for controlling hydraulic operations, excluding hydraulic winches * 1 pair of removable aluminum side boards, approx. 400 mm high, anodized finish * 1 removable aluminum tailgate, approx. 400 mm high, anodized finish * Approx. 40 mm thick hardwood floor above gooseneck, checker plate floor above king pin * 2-inch king pin * Rear section of gooseneck prepared for aluminum drive-on ramps * Round NATO socket on the front connection strip (Maeler & Kaege VG 96 917) LOADING PLATFORM * Extendable loading platform, approx. 8,800 mm long, with rear bevel approx. 500 mm x 10° * Recess in the loading platform and bevel for accommodating excavator dipper stick approx. 3,850 x 750 x 210/290 mm (L x W x H) * TPMS tire pressure monitoring system per ECE R 141 * BPW axles and suspension, 1st axle steerable, all remaining axles hydro-mechanically forced steered * 1st axle with electromagnetic reverse lockout, activated via reverse gear and manually * Technical axle load: 12,000 kg each, air suspension with raise and lower valve * Tires: 235/75 R 17.5, twin tires, 3PMSF * Mechanical landing legs with 2-speed gearbox and crank, JOST Module B – static test load approx. 50,000 kg * Continuous 50 mm thick hardwood floor on the loading platform and interrupted between axles (increases coefficient of friction) * 1 intermediate table, approx. 300 mm wide, for the extension tube with large cross-section * Extendable (galvanized) side extensions, approx. 230 mm per side (without wooden planks) * Wheel recesses with square climbing strips, approx. 15 x 15 mm ahead of axles, open through to gooseneck cross member, approx. 700 x 410 mm (W x D) * Aluminum covers for wheel recesses, usable as bridging elements for extension OR as widening planks * Aluminum elements lockable on telescopic tubes of the extensions * Widenable U-profiles for inserting ALU covers: - on the fixed section behind the gooseneck - on the intermediate table - on the extendable platform * Wheel recesses with square climbing strips, approx. 15 x 15 mm between 1st and 2nd axle, approx. 1,480 x 700 x 410 mm (L x W x D) * Aluminum covers for the wheel recesses, usable as bridging elements for the extension OR as widening planks * Aluminum elements lockable on the extension’s telescopic tubes * 1 pair of mechanical rear supports * Remote steering from front and rear via cable remote control, with axle tracking, without installation in the tractor unit HYDRAULIC LOADING RAMPS * One pair of two-section steel ramps, Type: DR-15/60-900-4350-KG-HV-M, approx. 4,350 mm in length and approx. 900 mm wide each * Hydraulically foldable ramp tips * Ramps can be shifted hydraulically approx. 235 mm outward and approx. 215 mm inward individually * Super Grip rubber surface approx. 25 mm and steel plate surface approx. 5 mm as additional

Condition: new, overall weight: 50,960 kg, maximum load weight: 39,720 kg, axle configuration: > 3 axles, total width: 2,540 mm, Equipment: ABS, You can find our complete vehicle inventory, including immediately and short-term available vehicles, on our website. Sample equipment features. Full specification upon request. Gooseneck * With beveled front corners approx. 45° and rear bevel approx. 750 mm x 10° * 3 pairs of lashing rings (LC 5,000 daN) * Hardwood flooring, approx. 30 mm thick Loading Platform Loading platform in extendable design * 5 pairs of fold-out outer lashing rings (LC 5,000 daN) * 3 pairs of fold-out outer lashing rings (LC 10,000 daN) * 1 pair of recessed lashing rings at the front of the loading platform (LC 10,000 daN) * Recesses in the outer frame of the loading platform for securing straps (LC 2,000 daN) * Hardwood flooring approx. 48 mm thick, over axles with chequer plate covering Landing Gear * JOST (mechanical) with 2-speed gearbox, approx. 24 t lift capacity (approx. 50 t test load) Axles * BPW axles: 2 fixed axles, 2 steering axles, drum brakes * Air suspension with lift/lower function * Self-steering axle with electro-magnetic reverse lock, activated via reverse gear or manually * Tires: 205/65 R 17.5 Brake System * Wabco brake system in accordance with EU directives with EBS-E (4S3M), without interconnecting lines to the tractor unit Steel Construction * Made of high-strength fine-grained steels * Steel grades: S355J2+N/S355MC (yield strength 355MPa), S690QL/S700MC (yield strength 690MPa) Hfodpju Sd U Ujfx Ag Njn Paintwork * First-class, durable corrosion protection of the standard shot-blasted welded frame, guaranteed by a 2-component (2K) zinc dust primer * High-quality 2-component (2K) top coat, single-color, RAL 3002 Carmine Red * Rear section metallized and painted in RAL 9010 (Pure White) * Rims in silver Accessories Included * 2-inch king pin * Galvanized front steel bulkhead approx. 400 mm high * Spare wheel holder in front of bulkhead * Yellow-red air couplings on galvanized connector bar front * 4 wheel chocks with holder at bulkhead * Bracket at rear of gooseneck for aluminum loading ramps * Galvanized folding supports under inclined edge of loading platform * Holder for beacon at rear of trailer * Yellow reflective tape on sides, extension, and rear in accordance with EU regulations * Brackets for warning signs with socket on both sides at the gooseneck and rear panel * TPMS tire pressure monitoring system per ECE R 141. Data transmission to the tractor unit via standardized EBS interface according to ISO 11992; for correct display, the tractor unit must support data transmission and display * Plug-in aluminum side walls and tailgate on gooseneck, approx. 2,440 x 400 mm (L x H); rear galvanized stakes are removable (body length approx. 2,560 mm) * Galvanized toolbox, integrated in gooseneck slope * 6 pairs of WADER container locks in loading platform, for 1 x 20' container, 2 x 20' containers or 1 x 40' container * Sliding mounting rails for aluminum ramps at rear of vehicle * 7 pairs of stake pockets for plug-in stakes approx. 100 x 50 mm, in the outer frame of the loading platform * Galvanized cross bracket under the loading platform * Galvanized extendable widenings, extendable approx. 230 mm per side * Lift axle on front axle, controlled via TEBS E according to current axle load and load status * 5 pairs of recessed lashing rings along the central beam (LC 5,000 daN)