Used Biesse Edge for sale (336)

Condition: excellent (used), Numerical Control Type NC 400 Through-feed motorized conveyoring belts (No.) 2 Horizontal units/supports (No.) 2 Drilling heads for each horizontal unit (No.) 2 Splindles for each horizontal drilling head (No.) 10 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Bottom vertical units/supports (No.) 4 Drilling heads/blocks for each bottom vertical unit (No.) 2 Vertical top pressure clamps (No.) 2 Digital quota (axes) display Total installed power (Kw) 23.7 The CNC controls the movement (X axe) of the mobile horizontal unit Laedpfezk Euljx Ab Noh The CNC controls the movement (Y axe) of the stops

Condition: good (used), Electronic self-centering through-feed clamping device NC400 control unit Adjustable dimensions: Length: from a minimum of 250 mm to a maximum of 2500 mm Ledpfxszfpule Ab Nsah Width (depth): from 180 mm to 780 mm Minimum height: 300 mm, maximum height: 1300 mm

Condition: ready for operation (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 6,170 mm, travel distance Y-axis: 1,395 mm, travel distance Z-axis: 180 mm, drill diameter: 35 mm, rotational speed (max.): 24,000 rpm, Submission of bids obligates timely collection by the end of May! Ledpfxjy Iwuhe Ab Njah TECHNICAL DETAILS Travel axis X: 6,170 mm Travel axis Y: 1,395 mm Travel axis Z: 180 mm Spindle Main spindle power: 7.5 kW to 12 kW Max. speed: 24,000 rpm Tool holder: HSK F63 Drilling head Vertical spindles X-direction: 10 Vertical spindles Y-direction: 10 Horizontal spindles X-direction: 6 Horizontal spindles Y-direction: 2 Max. drilling diameter: 35 mm Usable length: 45 mm Max. outreach: 60 mm Tool change system Turret tool changer capacity: 18 tools Holder: ISO30 / HSK F63 Max. tool diameter: 200 mm Max. tool length: 160 mm Working length: approx. 7,300 mm MACHINE DETAILS Clamping and vacuum system Vacuum pump capacity: 90 m³/h Uniclamp clamping unit workpiece thickness: 4,098 mm Electrical system Connection: 400 V / 50 Hz / 3 Phase Power: 22 kW Compressed air Connection: 3/8" Operating pressure: 6 bar Consumption: approx. 400 NL/min Extraction Connection diameter: 250 mm Air requirement: 5,300 m³/h Air speed: 30 m/s Pressure drop: 1,500 Pa Dimensions & Weight Dimensions (L x W): approx. 8,850 x 4,020 mm Machine weight: approx. 4,750 kg EQUIPMENT Portal design with movable machining unit 10 consoles with adjustable vacuum supports 30 adjustable support elements Multi-zone vacuum system Automatic central lubrication Chip conveyor Blow-off device for spindle Pneumatic preparation system Safety equipment in accordance with Directive 98/37/EC CNC control (Biesse system)

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, power: 40 kW (54.38 HP), input voltage: 400 V, input frequency: 50 Hz, workpiece height (max.): 60 mm, edge thickness (max.): 3 mm, height adjustment type: electric, feed rate X-axis: 30 m/min, Equipment: CE marking, documentation/manual, Biesse STREAM B MDS 2.0/15.0 Lodpfxjyu S Iuj Ab Njah

Condition: ready for operation (used), Year of construction: 2000, machine/vehicle number: 94464, functionality: fully functional, travel distance X-axis: 3,400 mm, travel distance Y-axis: 1,300 mm, travel distance Z-axis: 155 mm, controller model: XNC Numerical Control, TECHNICAL DETAILS Working Area X-Axis: 3,400 mm Working Area Y-Axis: 1,300 mm Working Area Z-Axis: 155 mm Number of Work Fields: 2 Tool Changer Positions (lateral): 3 Tool Changer Positions (chain): 20 Drilling Head Configuration: 10 vertical drills X-axis 12 vertical drills Y-axis 6 horizontal drills X-axis 2 horizontal drills Y-axis MACHINE DETAILS Ledpfxeydkkge Ab Neah Control System: XNC Numerical Control Vertical Spindle Type: C-axis Vector, ISO 30 cone type EQUIPMENT Extraction pump 8 manually adjustable beams for suction cup support with display 8 pneumatic bakelite rails for panel lifting 3 manually adjustable suction cups per beam Front safety and protection system with mats Comprehensive safety fencing Motorized mat for chip removal

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Equipment: CE marking, documentation/manual, Numerically controlled machining centres WINLINE WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. Laedpfxownx Agj Ab Nsh The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Condition: excellent (used), Numerical Control Type NC 500 (Software Tooling System) Through-feed motorized conveyoring belts (No.) 2 No. 2 Horizontal units/supports Drilling heads for each horizontal unit (N°) 2 Max. working width (mm) 3200 - Min. working width (mm) 205 (ca.) Ledpfxoyvrrqe Ab Njah No. 8 Bottom vertical units/supports Drilling heads/blocks for each bottom vertical unit (N°) 2 No. 4 Top vertical units/supports Drilling heads/block for each top vertical unit (N°) 2 Vertical top pressure clamps (N°) 5 Motorized endless screws to evacuate wastes/chips (N°) 2 Digital quota (axes) display Total installed power (Kw) 72,2 The CNC controls the movement (X axe) of the mobile horizontal unit The CNC controls the movement (X axe) of the conveyor belts The CNC controls the movement (Y axe) of the stops The CNC controls the movement (Z axe) of all the vertical units

Condition: good (used), Year of construction: 2004, I sell the 3-axis CNC working centre Biesse Rover 24L with beam table, year 2004. Lajdpfxsh Txlcs Ab Njh Configuration: 3-axis main spindle HSD recently full reconditioned / Water cooled RS1600 Tool magazine 7 positions ISO30 on working head 1 grooving saw X-direction Drilling head 14+4+2 spindles Useful working area 4500x1330mm. 2 working fields, 4 clamping areas Automatic central system of lubrication. Total power 35kW XDNC 2.01 software controller with full instructions. Pump Becker 250/300 m3/h. 5,5KW. Additional vacuum outputs for raster works or connection of additional clamping devices. Good condition. Available immediately. Repair needed: Handles on beam table, rotation of the ISO30 magazine on working head

Condition: excellent (used), Complete factory for the production of furniture cabinets, composed by: KZ2207) “BIESSE” FDT - CN Drilling and Dowels Inserting Line, composed by: Loader "RBO" Tornado, 2 x CN Multi-Borers "BIESSE" FDT, 1 x CN Multi-borer and dowels inserter "BIESSE" SDT CN, Stacker "RBO" Tornado KZ2205) 4-sides Sizing and Edge Banding LINE "HOMAG", composta da Double-station portal Loader "ESSE2", 1st Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/20/QA/15, Turning station at 90° "HOMAG" TD 31/30/12, 2nd Double-side Sizing and Edge banding machine "HOMAG" PowerLine KF 20/21/QA/35, 2nd Turning station at 90° "ESSE2", Double-station portal Stacker "ESSE2" Laodpfx Aboh T Dvts Njh KZ2210) 'BREMA (BIESSE)' Mod. Vektor CNC-LINE for Drilling-Routering-Inserting: Hedgehog (18 positions), CNC Vektor GLR 30-13, Vektor XL 40-30, Idrak-3, various Transfers KZ2090) Sander (Veneer Sanding machine) "COSTA LEVIGATRICE" SN TR TT TT TR 1350 KZ2045) Gantry-CNC with edge banding unit "MORBIDELLI" Planet HP6018 (2 Tables, 6 reels) KZ2033) Edge bander "HOMAG" KAL 310 with Loader-feeder "ESSE2" KZ2075) Furniture assembling LINE "TERMOPAK" with carcasse press (through-feed) KZ2203) Sawing LINE "SALVADOR" (panels cross-cutter + splitter) with Loader "ESSE2" KZ2009) VENEER Department (double-knife guillotine "MONGUZZI", cross-cut shear "MONGUZZI"; splicing machine "KUPER", guillotine shear "TAGLIABUE", ecc) KZ2201) Short-cycle Pressing LINE "WEMHONER" useful size mm 1300x6200 KZ2215) Automatic panels storage System "ESSE2" Mod. MAGAZZINO N° 3 Saw-dust Filtering Stations "MION" (1st of Kw 132, 2nd of Kw 55, 3rd of Kw 22) Various vehicles (truck, van, etc.) And many other machines (i.e. CNC "BIESSE" Skipper 130, small multi-borers "VITAP" and MORBIDELLI", circular saws, etc.), rollers ways, shelvings, fork-lift, transpallets, etc. Machines still installed at the end-user's factory. They can be inspected by appointment.

Condition: excellent (used), Flexible N.C. automatic line for drilling, routing and inserting (hardware). Numerical control with Albatros software. Consisting of: KZ2046) Infeeder with hedgehog (buffer) store (18 positions) KZ2047) Transfer with motorised conveyoring belt KZ2048) CNC Mod. Vector GLR-X 30-13 KZ2049) Transfer with motorised conveyoring belt Ledpfeidmkrox Ab Nsah KZ2050) CNC Mod. Vektor XK 40-13 KZ2051) Transfer with motorised conveyoring belt KZ2052) CNC Mod. Idrak 3 KZ2053) Transfer with motorised carpet with 90° inclination on a rollers table KZ2054) Rollers conveyor with also motorised belts (to move panels at 180° to the assembly lines)

Condition: excellent (used), FULL LINE of Double-side Sizing-Milling & Edge Banding, max working width mm 3000, with automatic handling. Composed of the following machines: X03001A) Double Loader "RBO" Mod. Winner C 3200 with central motorised roller conveyor X03001B) 1st Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 1 - 7.5 X03001C) Turning station (90°) lengthwise to crosswise "RBO" Mod. GPK 1 X03001D) 2nd Double-side Sizing & Edge Banding "BIESSE" Mod. Stream SB 2 - 11 X03001E) Turning station (90°) crosswise to lengthwise "RBO" Mod. GPK 2 Lasdpfoi Rbg Tox Ab Njh X03001F) Double Stacker "RBO" Mod. Winner S 3200 with central motorised roller conveyor

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, Digital automatic drilling machine BIESSE SKIPPER 130 Working condition. Ljdpfx Aorkm R Hob Neah Free for loading.

Condition: good (used), Year of construction: 1997, functionality: fully functional, CNC machining center Biesse Rover 20 Year of construction 1997 Manufacturer Biesse Italy S/N 64851 Working area 2.893 x 950 mm Lsdpfx Ajtpuu Djb Nsah 6 traverses with 12 vacuum cups Milling spindle with ISO 30 tool holder 3.6 kW, drilling unit: 10 vertical drills 6 horizontal drills Grooving saw, 6-fold tool changer. NC410 control unit Color screen Total power consumption 10 Kw 400 V , 50 Hz with safety fence ( not on the pictures ) 3 step mats with Becker vacuum pump, 3,0 Kw CE marked 1900 kg

Condition: not inspected (used), Year of construction: 2008, functionality: unexamined, workpiece height (max.): 90 mm, workpiece width (max.): 3,200 mm, workpiece length (max.): 3,200 mm, edge thickness (max.): 3 mm, The machine has the following configuration: Lsdpfeyq Avhex Ab Neah Number of panel sizing/milling units on the left side: 5 Milling unit (AS10) Double finishing cutter, top and bottom 2 pre-milling units Milling unit Number of edge processing units: 10 End trimming Top and bottom trimming (rough) Fine trimming for chamfering and rounding Corner rounding (AR34, 4 motors) Edge milling (FB40, 1 motor) Edge scraping Belt sanding (1 motor) Glue scraping Polishing (2 motors) Spray device TECHNICAL DETAILS Minimum panel height: 10 mm Maximum panel height: 90 mm Maximum panel length: 3,200 mm Maximum panel width: 3,200 mm Minimum edge thickness: 0.4 mm Maximum edge thickness: 3 mm FEATURES Feed chain with carriers Pressure applied via rubber belt Panel guide rails with NC positioning Edge roll magazine with 6 positions Hot melt adhesive system for PUR adhesive NORDSON Roller set for edge pressing 4 pressure rollers with NC positioning Spray device mounted on upper cabinets The machine is sold and delivered in its actual and legal condition ("as seen and approved") based on photo documentation and descriptive technical/commercial documents. The buyer has the right to inspect the goods prior to collection and assumes responsibility for installation, securing, and operation of the machine at the destination. External reference: 7685

Condition: used, Year of construction: 2006, machine/vehicle number: BM0000029, controller model: WINDOWS XP, number of spindles: 42, plate height: 60 mm, plate length: 2,800 mm, plate width: 1,300 mm, No minimum price – guaranteed sale to the highest bidder! Vertical CNC machining center for drilling, milling, and dowel insertion with an additional robotic arm for loading! The machine must be picked up between June 10, 2026, and June 30, 2026! The machining center consists of two machines as follows: 1. BIESSE BREMA VEKTOR 15-18 R Laedpfxey Uvnaj Ab Njh Working area X-axis: 2,800 mm Working area Y-axis: 1,300 mm Number of controlled axes: 3 axes Total number of drilling spindles: 42 Total number of tool changer positions: 10 Maximum panel thickness: 60 mm Automatic panel loading system Automatic panel stacking system Drilling units Drilling unit 1: Horizontal drilling spindles in X Number of horizontal drilling spindles in X: 9 Drilling unit 2: Horizontal drilling spindles in Y Number of horizontal drilling spindles in Y: 9 Drilling unit 3: Vertical drilling spindles Number of vertical drilling spindles: 24 Milling spindle Number of milling spindles: 1 Number of controlled axes milling spindle: 3 Automatic tool changer: Yes Number of tool magazine slots: 10 Control and safety Control system: WINDOWS XP Machine programming software: BKEEPER Safety standard: EC marking Safety system: Safety light curtains 2. KUKA KR 180 L100-2 K 2000 Maximum panel width: 1,300 mm Maximum panel length: 2,800 mm Maximum payload: 100 kg Number of controlled axes: 6 Arm reach: 3,700 mm Number of panel stacking stations: 3 Control system: KR C 2 EQUIPMENT Automatic panel loading system Automatic panel stacking system Barcode scanner HONEYWELL Protective netting on the machine The machine is sold and delivered in its actual and legal condition ("as is, where is") based on photographic documentation and technical/commercial documents of a descriptive nature. The buyer has the right to inspect the goods before collection and assumes responsibility for the installation, securing, and use of the machine at the destination. External reference: 8530

Condition: used, Year of construction: 2006, functionality: fully functional, TECHNICAL DETAILS Components ADVANTAGE C transverse loader: automatic ROTATING DEVICE (flipper): available BIESSE FTT: with 4 heads, drilling and milling, automatic tool change BIESSE FHT: 2 WORKING UNITS horizontal drilling and dowel insertion WANDRES: brush cleaning from top ADVANTAGE SC transverse unloader: automatic Plate dimensions Plate length: 240 - 3,200 mm Single panel width: 140 - 1,550 mm Plate width: 140 - 800 mm Plate thickness: 12 - 60 mm Drilling units Drill heads FTT 800: 2 machining centres with 4 boring units - 5 working tables Lsdpfx Aoy Ui Rnsb Neah Vertical spindles (X-direction): 14 independent per head Vertical spindles (Y-direction): 18 independent per head Horizontal spindles (X-direction): 3 independent, with double output Horizontal spindles (Y-direction): 3 independent, with double output Tool change system Revolver cartridges: 2 Positions per cassette: 56 Application: Automatic tool change of the vertical spindle centers on 4 drilling units of the two machining centers A and B. Milling spindles Electro spindle 1: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Electro spindle 2: 3.7 kW (5 HP), ISO 30, with inverter and 3-way tool change rack Lateral positioning units Workstations: 2 for parallel processing of identical or mirror-inverted panels left positioning element: fixed for lateral reference Right positioning element: movable in X-direction, on lower supports, linearly guided Adjustment: automatic according to the X-dimension of the panel Drive: Brushless with digital control Function: Detection of the actual X Length in the machining center, automatic correction of the drilling positions Max. travel speed: 120 m/min Loading and unloading Infeed system: 1 belt conveyor with cross feed, single drive Unloading system: 1 belt conveyor with cross feed, single drive Additional: Cleaning fan in the unloading area Drill heads FHT (horizontal): machining centres with 2 working units (1 LH unit / 1 RH unit) - 3 working tables. HORIZONTAL BORING UNITS with 24 independent spindles to be installed onto 2 operating units HORIZONTAL INSERTING UNITS WITH 5+5 GLUE INJECTORS AND 8 mm. DIAMETER DOWEL INSERTERS TOOL-HOLDER ADAPTOR for the quick change spindles of the boring units. GLUE INJECTION AND DOWEL INSERTING UNIT for 8 mm. dia. dowels to be added to the standard ones. The unit is prearranged for the insertion of 8 mm. diameter and 25-35 mm. long dowels.* The 8 mm. diam. dowel inserting units are required. NOTE: Dowel inserting unit was never used and not tested. Not possible to be tested ADVANTAGE C 3200 TRASV. 1 POS - loading ADVANTAGE SC 3200 TRASV. 1 POS - unloading Security features Standards: CE compliant Safety equipment: Extensive protective enclosures

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad Working width 1350mm Pressure rollers for short elements. Laodpezkmdhsfx Ab Njh Air-blow on both units. Total weight 3050kg Condition very good. Available immediately.

Condition: excellent (used), Year of construction: 2001, I sell the Stacking device BIESSE RBO MAGNUM, year 2001. Stacking device one side feeding / also suitable for pallets. Vacuum-System (including pump) Lasdpoxyag Uefx Ab Neh Automatic loading. Infeed table motorised band-system Infeed tables motorised roller-system on the floor (2 channels) Outfeed table front Band-system Security fence system fully complete ! Total power 25kW Year 2001. Available immediately. Ready for work.

Condition: excellent (used), Year of construction: 2015, For sale: 4 units of CNC ROVER BIESSE 2231. Years of manufacture: 2013, 2014, 2015, 2016. In very good condition. Laedpfx Aex Tbk Reb Noh

Year of construction: 2001, condition: ready for operation (used), Biesse Rover 22 CNC machining centre Year of manufacture 2001 SN 07498 Working range 4 axes Lajdpfxsggxihe Ab Njh X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vacuum cup holders 4 pneumatic bakelite bars for lifting the platen Vertical electrospindle 7,5 kW with automatic tool change, ISO 30 taper Automatic tool change 7 positions on the working head Drilling head with 20 spindles arranged as follows: 7 vertical in X-axis 7 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Grooving saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical specifications subject to change

Condition: excellent (used), Year of construction: 2001, I sell the CNC accessories inserting machine with glue spraying BIESSE COMIL INSIDER IT2G. Year 2001. 2 Stk. CNC drawers slidings inserting from top. 6 Stk. Glue spraying heads 1 Stk. Vibration accessories input device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request. Lodet N N Aqjpfx Ab Njah

Condition: excellent (used), Year of construction: 2002, I sell the CNC drilling machine with inserting BIESSE COMIL INSIDER KTC. Year 2002. 2 pcs. CNC drilling heads from top. Lodjt N Rixopfx Ab Neah 1 pcs. Glue spraying head 3 pcs. 3Master vibratori Vibration dowel inserting device. Part of the BIESSE line consisting of: COMIL Insider drilling - milling - grooving - dowel inserting - gluing - accessories inserting line Manufacture year 1999-2001. Possible to sell the machines separately. Vibration loaders and conveyors on agreement. For more photos and details please send the request.

Condition: excellent (used), Year of construction: 2008, I sell the double side throughfeed CNC working centre Biesse Skipper 100 Year 2008. Very productive and fast. Automatic infeed table. Working length 90-3000mm Working width 70-1000mm Working height 8-60mm Configuration per side: Milling head 3,5 kW, 7000-18000 rpm Laodpeq Diw Ajfx Ab Nsh 29+8+2 Drilling heads 1 Grooving saw D.150mm X-direction Software BiesseWorks. CD included. Version with outfeed table. Condition very good ! Fully working. Automatic system of central lubrication and dust collection connections. Complete with safety barriers, Transport elements and CE-points. CE-certyficate and full documents included.

Condition: ready for operation (used), Year of construction: 2001, functionality: fully functional, Equipment: documentation/manual, Decommissioned 07.2026 as unnecessary Laodpfxjznk Rme Ab Noh

Condition: ready for operation (used), Year of construction: 2009, travel distance X-axis: 6,200 mm, travel distance Y-axis: 1,520 mm, travel distance Z-axis: 660 mm, number of axes: 5, number of slots in tool magazine: 22, controller manufacturer: BIESSE, controller model: XP600, spindle speed (max.): 22,000 rpm, This 5-axis BIESSE Rover C 6.65 was manufactured in 2009. It features a working area of 6,200 x 1,520 x 275 mm and a powerful main electrospindle with a maximum speed of 22,000 RPM. The machine includes a 22-position tool changer and an integrated vacuum system for efficient operation. If you are looking to get high-quality CNC machining capabilities, consider the BIESSE Rover C 6.65 CNC processing center we have for sale. Contact us for further details. Laodoz Trctspfx Ab Noh - Control Unit: Biesse XP600 (Upgraded to PC with Windows 10 OS in 2021)- Main Electrospindle Power (S1 100%): 12 kW @ 12,000 RPM- Main Electrospindle Power (S6 40%): 15 kW @ 12,000 RPM- Max Spindle Speed: 22,000 RPM- Tool Interface: HSK F63- C-Axis: 360° continuous rotation (Replaced complete in 2015)- B-Axis: +/- 100° (positioning), +/- 98° (interpolation)- Z-Axis Stroke: 660 mm- Z-Axis Feed Speed: 30 m/min- Drilling Head: BH 9 (5 vertical spindles at 32 mm pitch in Y, 2 horizontal double-output spindles)- Tool Changer: 22-position chain-type tool changer (180 mm pitch, max tool dia 250 mm) + 1-position Pick-up tool changer- Work Table: 10 ATS work tables (L = 1,525 mm), 30 module supports with Electronic Positioning System (EPS X-Y)- Vacuum System: Vacuum pump 250 m³/h (Replaced in 2016)- Cooling Unit: 1,600 W liquid cooling unit for electrospindles- Chip Conveyor: Integrated chip transport belt in machine bed- Optional Equipment: Uniclamp clamping devices (20 double-stroke, 10 round), 8 horizontal clamps, 20 vacuum modules (132x146 H74mm), 6 vacuum modules (132x75 H74mm), 8 positioning aids (36 kg lift force each), saw blade 350 mm Z=28, safety fence elements, control cabinet with air conditioning.- Software: NC-Hops 5-axis license, ACADemy 2D CAD, Automatic suction cup positioning module.