Used Biesse Rover 16 for sale (338)

Condition: used, machine/vehicle number: 007790, X axis working area: 3800 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 3 axes Total number of drilling spindles: 39 Lslhccjvzc Smsqpjhg Total number of tool changer positions: 16

Condition: used, Year of construction: 2021, Working dimension X: 4.320 mm Working dimension Y: 1.620 mm Working dimension Z: 245 mm Independent Z-axes: 2 Number of milling spindles: 1 Blow-off device: Yes Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis BIESSE Torque C-axis: Yes Tool clamping system: HSK-F63 Tool changer positions: 16 Disc tool changer: Yes Vertical drilling spindles: 17 Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction, in Y-direction BIESSE Drilling aggregate BH 29 2L: Yes Cantilever machine: Yes Machine table: Pod and rail table Workpiece support aids: Yes Electronic supervision of the end-position of the stops: Yes Two rows of stops: Yes Number of consoles: 6 Self-adjusting machine table: Yes BIESSE FPS: Yes Vacuum pump: Yes Number of vacuum pumps: 1 Capacity vacuum pump: 250 m³/h Safety device: Bumper, Light barrier Chip conveyor: Yes Lhjlhccqowlhr Eepsg Interface for .dxf data: Yes BIESSE Remote control unit RM 850: Yes Tool charge measurement: Yes Automatic lubrication: Yes Control: PC control UPS - Uninterruptible Power Supply: Yes Software: BIESSE B_SOLID, BIESSE SOPHIA, BIESSE BSOLID 3D-GRAVUR-MODUL, MICROSOFT WINDOWS 7 Conformity marking: CE mark, UKCA-Zeichen Total connection: 20,4 kW Space requirement Length: 8,08 m Space requirement Width: 5,04 m Space requirement Height: 2,77 m

Condition: new, Year of construction: 2024, CNC machining center ROVER A SMART 1632 Working area X = 3280 mm Y = from 1580 to 1660 mm, according to the working conditions Z = 200 mm - 5-axis machining unit and drilling unit, with vacuum modules H 74 mm Z 245 mm - 5-axis machining unit and drilling unit, with vacuum modules H 29 mm Workpiece passage: Y = 1900 mm Axis travels X = 3706 mm Y = 2294 mm Z1 = 515 mm Z2 = 371 mm VACUUM SYSTEM Division of the vacuum system into 2 working areas and 2 clamping areas in X. The machine has been designed to work with up to 2 pumps among those available. The electro-pneumatic pre-equipment is adequately dimensioned according to the number and type of pump selected. ASSISTING VACUUM SYSTEM - 2 areas It allows the clamping of workpieces through vacuum templates. 6 ATS workpiece supports 18 module supports Leljufggwohccqpshg Work table SA (Set-Up Assistant) for work tables up to 1550 mm. Supported manual positioning system with direction indicator and position indicator. Work table for processing solid wood. Subdivision of the pneumatic system into 2 working areas in X Rear row fence with 115 mm stroke and 25 mm fence extensions. The fences, pneumatically lowerable and CNC-controlled Stop of the middle row, positioned at 1080 mm, with 140 mm stroke. 4 side stops with 140 mm stroke complete with pneumatic equipment. 2 additional side stops with 140 mm stroke Sensor for monitoring the lowering of the stop. 4 positioning aids for vacuum module height = 74 mm 250 m3/h vacuum pump Vacuum module 132 x 146 - H74 mm Vacuum module 132 x 75 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles. Vacuum module 132 x 54 - H74 mm with high friction surface, integrated vacuum seal and preparation for anti-slip needles Chip conveyor belt Automatic lubrication system Machining unit with 5 interpolating axes 13 kWp (17.4 HP), with HSK F63 adapter, liquid-cooled 11 KW (15 HP) from 12,000 rpm to 20,000 rpm, use S1 13 KW (17.4 HP) from 12,000 rpm to 20,000 rpm C-axis: 360° endless rotation Suction hood with 12 NC-controlled positions for electrospindle with 5 axes Coolant system Additional Z-axis support for rear machining units, with independent Z-axis BH 24 L drilling head 13 individually retrievable vertical drilling spindles with 32 mm pitch, 8 in X and 5 in Y 5 horizontal drilling spindles with double output and center distance 32 mm, 3 in X + 2 in Y 1 grooving saw in X d120 mm Turret tool magazine with 16 places, installed directly on the machining unit X Lateral tool magazine with 12 pockets in the machine bed HSK F63 tool holder, equipped with a long integrated flange, for saw blades on 5-axis head Digital devices for measuring the tool length with d up to 130 mm software B-Solid SOPHIA - IoT Connection SmartConnection NC-Hops 7.0 machine license 4-/5-axis NC-Hops 7.0 1.AV License 4-/5-axis Location: ex stock 54634 Bitburg - immediately available -

Condition: excellent (used), Year of construction: 2014, Working range: X-axis: 3280 mm Y-axis: 1620 mm Z-axis: 245 mm Feed speeds: X-axis: 80 m/min Y-axis: 60 m/min Z-axis: 20 m/min Vector speed: 100 m/min Electro spindle: HSD 5 axes 11 kW with continuous 360° rotation on B and C axes, enabling machining of complex shapes with high precision liquid cooled Drilling head: HSD  20 vertical spindles 4 horizontal grooving saw in X-axis grooving saw in Y-axis Lelhccqjwhypnspohg Working table:  6-piece beam 4 suction cups on 1 beam preparation for uniclamp Tool magazines: 16-position turret magazine Vacuum system: Vacuum pump with a capacity of 250 m³/h, ensuring a firm clamping of workpieces during machining Software: bSolid

Condition: used, Year of construction: 2023, Numerical Control BH 660 with BSolid Working range on X-axis mm 4320 Working range on Y axis mm 1660 Working range on Z axis mm 200 No. 2 work fields on X axis Bar worktop No. 8 adjustable bars for suction cup support No. 8 pneumatic bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 5-axis vertical electrospindle, with automatic tool change, liquid cooling, HSK63 type cones, KW 13 (HP 17.4) Automatic tool change system with 16 positions with revolver positioned along the X axis on the back of the machine Automatic tool magazine with 12 positions positioned on the machine side BH24 L drilling head with spindles arranged as follows: - No. 8 verticals on X axis - N° 6 verticals in Y axis - N° 6 horizontal on X axis - N° 4 horizontal in Y axis - N° 1 Integrated blade for making grooves Chip evacuation system with motorized belt Front protection and safety system with carpets Automatic lubrication system Air conditioning system for cooling and cleaning of machine control 250m/c vacuum pump TECHNICAL DETAILS TO BE CHECKED Lhelhcowgc D Ejcqpeg

Condition: used, machine/vehicle number: 007738, X axis working area: 3280 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Lhelevu If Sehccqpeg Number of controlled axes: 5 axes Total number of drilling spindles: 28 Total number of tool changer positions: 28

Condition: used, Year of construction: 2017, Working dimension X: 3.280 mm Working dimension Y: 1.660 mm Working dimension Z: 245 mm Independent Z-axes: 2 Number of milling spindles: 1 Main motor power: 13,2 kW Rotation speed max: 24.000 rpm Torque support: Yes 4th axis: C-axis Tool clamping system: HSK-F63 Lhslhccewi Shfjqpeg Tool changer positions: 16 Number of exchangeable units: 1 Vertical drilling spindles: 13 BIESSE Drilling aggregate BH 24 L: Yes Horizontal drilling spindles in X: 6 Horizontal drilling spindles in Y: 4 Groove saw: in X-direction Lock recess milling aggregate: Unit, changeable Cantilever machine: Yes Machine table: Pod and rail table BIESSE Machine table ATS: Yes Three stop ranges: Yes Anzahl Vakuumzonen: 2 Number of consoles: 6 Safety device: Safety mat Automatic lubrication: Yes Software: BIESSE B_SOLID Conformity marking: EAC mark, CE mark

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: Lsleugpwnehccqpshg * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, machine/vehicle number: 007839, X axis working area: 4300 mm Y axis working area: 1600 mm Working Table: Pod and Rail Main Electrospindle power: 13 KW Lhelhcsv Sf Ixjcqpsg Number of controlled axes: 5 axes Total number of drilling spindles: 23 Total number of tool changer positions: 16

Condition: excellent (used), Year of construction: 2004, Functionality: fully functional, machine/vehicle number: 36784, BIESSE Rover 24 L machining center Lolhccqjvz Utiopehg Composition: - X: 4500mm Y: 1300mm Z: 180mm - 4 Axes - BIESSE WORKS program - Spindles ISO 30-1 - Automatic Central System of lubrication - Total power 35kw - Vacuum pump of 250m3/h - ATS work table with 4 suction cup trolleys -Predisposition for ATS vices and pliers -16 suction pads - Horizontal milling head 5 HP - Vertical and horizontal drilling block 16 chucks -Evacuation belt chip -Remote control of speed control, axis movement

Condition: used, Ferwood Code: RU0000986 - Condition: Used - Compatible Machine: CNC BIESSE ROVER - If interested we offer a revision service, contact us. Lhslhccovazkfoqpsg

Condition: used, machine/vehicle number: 007364, X axis working area: 3060 mm Y axis working area: 1320 mm Lelhccqotz Hxaopehg Working Table: Pod and Rail Number of controlled axes: 4 axes Total number of drilling spindles: 20 Total number of tool changer positions: 10

Condition: used, Year of construction: 2008, Biesse NBC 412 412 Automated cell for nestig complete with loading and unloading system & Rover A 3.40 FT Description: Rover A 3.40 FT Lhjlhccqswh Sfzspeg Centralized automatic lubrication system 8 front stops + 8 back stops with sensors 1 Rh side stop with sensor Vacuum system for 2 300 m3/h pumps 12 kW (16.1 HP) Electrospindle with ISO 30 adaptor, air cooled Blowing unit Boring head BH 18 A Revolver tool changer with 10 positions Numerical Control XP600 BiesseWorks - Advanced - machine and office version BIESSE NEST Module Arm for pieces loading and unloading, positioned on the machine beam Loading and unloading table, positioned on the LH side of the machining center CE Safety devices 2 m3/h rotary claw vacuum pump Mechanical presser ring with pneumatic lowering , for nesting based application (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Technical characteristics En cours de vérification Lolhjtqi Uysccqpohg Nesting machining center with full table X axis travel: 4300 mm Y axis travel: 2205 mm Z axis travel: 326 mm Electrospindle 3-axis spindle, 12 kW HSK F63 chuck Revolver-type tool magazine, 8 tool holders BH17L drilling unit Vertical and horizontal drilling unit + grooving unit 10 vertical drill bits, 32 mm pitch (7 X-oriented and 3 Y-oriented) 6 horizontal drill bits, 32 mm pitch (2 X-oriented and 1 Y-oriented) 1 grooving blade, diameter 120 mm, for grooving in X (useful cut 25 mm) Independent Z drilling unit to optimize machining times 9-area vacuum table with MDF martyr panel Rear, front and side (left) reference stops 2 vacuum pumps 300 m3/h Controls : On Windows PC BiesseWorks Advanced software machine version Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Martyr table surface program Collision management Tooling set and parametric cones supplied 2 BiesseWorks office version software keys supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 33,4 Kw Overall dimensions Lenght: 8400 mm Width: 5800 mm Height: 2445 mm Weight: 3840 Kg

Condition: ready for operation (used), Year of construction: 2006, Functionality: fully functional, Working dimensions: X-axis: 3,060 mm Y-axis: 1,260 mm Lholhcowhw Ihscqpsg Z-axis: 150 mm Work table: 6 ATS workpiece supports, each with 3 vacuum suction cups 6 rear workpiece stops, program-lowered, installed in one support each 6 front workpiece stops, program-lowered, installed in one support each, positioned approximately 970 mm from the rear 2 + 2 side workpiece stops 4 lifting rails, pneumatically program-lowered, for positioning heavy workpieces Vacuum pump 90 cbm/h Machining head equipment: Drilling head BH 21 L with: 14 vertical drilling spindles, each individually accessible 2 + 2 horizontal drilling spindles in the X direction Grooving saw, diameter 120° fixed in the X direction Milling spindle 12 kW, HSK 63 F Rotation speed 1,000 - 24,000 rpm Rotation right and left C-axis 360 degrees for adapter units 18-station tool magazine Safety features: * Safety mats in front of the machine * Protective grille on the left with access door XP 600 control system with NC HOPS 4 programming software Without tools and units Optionally available: * Adapter unit with lock case for door machining * Adapter unit with pivoting milling unit * Adapter unit with saw

Condition: used, machine/vehicle number: 006280, X axis working area: 3665 mm Y axis working area: 1260 mm Lhslhccskw H Egsqpog Working Table: Flat table Number of controlled axes: 3 axes Total number of drilling spindles: 18 Total number of tool changer positions: 18

Condition: used, Year of construction: 2006, Biesse Rover B 4.35 CNC Machine Description: Working fields: X = 3200 mm; Y = 1315 mm; Z = 150 mm Table type: Beam table (manually) 6 bars with 3 cups 1 milling motor Motor 9 kW Drilling unit: BH-17 Tool holder: ISO-30 Changer: 9 positions moving along Number of vacuum pumps: 1 Biesse Works (All changes, mistakes in technical data, info and prices reserved. Availability subject to prior sales. No guarantee on printed data!) (Alle Änderungen und Irrtümer in den technischen Daten, Angaben und Preisen sowie Zwischenverkauf vorbehalten! Keine Garantie auf gedruckte Daten!) Best woodworkingmachines from the Netherlands Holland Lslhjwgctgsccqpjhg Die besten holzbearbeitungsmaschinen aus die Niederlande De beste gebruikte machines uit Nederland

Condition: ready for operation (used), Technical characteristics Capacity: 6200mm in x Lolhccotqkadeqpehg 1535mm in y 400mm in z 5 axis electric spindle 11kW HSK63F 10 ATS beam workbench with motorized movement (4 suction cups / beam) 15° rotation on vacuum modules Positioning defined by the numerical control and recorded on each program 14 position chain tool magazine Independent tool changer on the front panel (large diameter / blade) Windows Computer BIESSE WORK staircase software Laser and vices not included Safety conveyor Vacuum pump 250m³/h Ideal for the production of stairs and joinery Power and Motors Pluging: Three-phased Power: 21 Kw Overall dimensions Lenght: 9000 mm Width: 3000 mm Weight: 7200 Kg

Condition: used, machine/vehicle number: 007902, X axis working area: 6200 mm Y axis working area: 1935 mm Working Table: Pod and Rail Main Electrospindle power: 18 KW Lhjlhccjwkf Egoqpog Number of controlled axes: 5 axes Total number of drilling spindles: 9 Total number of tool changer positions: 45

Condition: ready for operation (used), Technical characteristics Machining X 3180, Y 1340 Drilling capacity X 3405, Y 1260 Pneumatic locking HSK63 12 KW 3-axis electro-chuck Displacement 0-100 m / min 0-90 ° blade grooving group 14-pin vertical drilling unit, 6-pin horizontal, 15-inch screen control cabinet included SOFT and control Machine to be restarted Nombre de ventouses12 Lolhcjtqka Tecqpehg Nombre de poutres6 Caractéristiques usinageVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics CNC ROVER A machining center BIESSE's Rover A series machining centers are specially designed for daily milling and drilling operations on panels, doors, component doors and furniture. The mobile gantry structure is made of extra-thick electro-welded sheet steel and stiffening hangers to minimize distortion during machining. For movement of the moving column along the longitudinal axis (X axis) and in the transverse direction (Y axis), BIESSE has opted for a rack-and-pinion solution, enabling higher acceleration and speed parameters than those achievable with a ballscrew. Controlled axis motors : Brushless motors, controlled by digital actuators. Hardened steel controlled axis guides. Automatic centralized lubrication system. Machine equipped with two vacuum pumps, 250 m3/h and 300 m3/h. Activation of vacuum and pneumatic systems is available from any point along the machine's X work zone. Working range (vertical electrospindle axis): X= 5540 mm Y= 1560 mm for 4 axes, 1570 for 5 axes Z= 230 mm with modules H=74 mm /Configuration 1B and 3B Z = 275 mm with modules H=29 mm / Configuration 1B and 3B 8 ATS aluminum worktops 1 X-axis metric ruler for correct positioning of worktops 8 metric rulers on Y axis for correct positioning of workpiece clamping systems 32 carriages 132 x 132 x H 41.5 mm Each carriage rotates the modules every 15° 32 plugs for closing the carriages Additional quick-fit connections for special jigs EPS (Electronic Positioning System) automatic positioning for worktops up to 1550 mm, allowing automatic positioning of clamping devices at selected points. An entire half machining zone can be positioned in hidden time while the machine is machining (avoiding major productivity losses). Each carriage is equipped with a blowing system to ensure that the machining plane on which it slides is always clean. 2 X-shaped machining zones Reference systems : Rear line stop with 115 mm travel Intermediate line stop positioned at 685 mm Front line stop positioned at 1348 mm 4 side stops with 140 mm travel (2 left and 2 right) 2 additional side stops (1 left and 1 right) 1 retractable linear stop for raw panels. Vacuum module 132 x 146 Vacuum module 132 x 75 Vacuum module 132 × 54 CFT system : Vacuum system for aluminum CFT modules, for left work area Aluminum vacuum module, dimensions : X=1250 mm, Y=625 mm, H=74 mm, for modular worktops With this solution, it is possible to prepare a continuous surface for thin/flexible panels or for nesting, bending, etc Uniclamp vice Support base 130 x 130 mm Flat disc 130 x 130 mm Double-movement Uniclamp vice Circular support base, diameter 130 mm Clamping workpieces thicknesses from 40 to 98 mm Horizontal vice, height 74 mm Chip and waste conveyor belt Configuration (3B) : Machining unit 5 axis 13kW electrospindle, up to 20000 RPM HSK F63 spindle Liquid-cooled C axis sewing : 360° continuous rotation Maximum undercut angle: -5°. Drilling unit BH 17 L drilling head Up to 17 independent tools Single and multiple drilling Work on all 5 faces of the workpiece and grooves with X-direction blade on the upper face. 10 independent vertical spindles, 32 mm centres 5 in X direction 5 in Y direction 3 opposite independent horizontal spindles, 32 mm pitch 2 in X direction 1 in Y direction Lhsletqi U Iohccqpjg 1 circular blade ⌀ 120 mm For groove in X direction (useful cut 25 mm) Multifunctional unit 1 circular blade ⌀ 300 mm 2 independent Z axes (1 for the electro-spindle and 1 for the drilling and multi

Condition: ready for operation (used), Technical characteristics useful fields: 6000 x 1772.5 mm 1 4-axis spindle with HSK 63 tool charger, 12 positions 28 drilling spindles including 8 horizontal 10 mobile beams with 3 suction cups + vices Machine to be restarted Course d'axe Y1850 mm Course d'axe X6860 mm Course d'axe Z275 mm Nombre de ventouses3 Nombre de poutres10 Capacité pompe à vide100 m3/h Power and Motors Overall dimensions Lhjlhcotqkbijcqpsg

Condition: ready for operation (used), Technical characteristics X axis travel : 3290 mm Y axis travel : 1100 mm Z axis travel : 326 mm Part passage : 170 mm Electrospindle : 5-axis spindle, 11 kW HSK F63 chuck Revolver-type tool magazine, 16 tool holders Tool magazine at end of work surface, 10 tool holders BH26 2L drilling unit : Vertical and horizontal drilling unit + grooving unit 16 vertical drill bits, 32 mm centres (8 X-oriented and 8 Y-oriented) 8 horizontal drill bits, 32-mm pitch (4 X-oriented and 4 Y-oriented) 2 grooving blades, diameter 120 mm, for grooving in X and Y (useful cut 25 mm) Independent Z drilling unit to optimize machining times Work surface : NC-controlled worktable with motorized moving beams 6 ATS beams with automatic positioning (EPS) and suction cups 3 steerable suction cups with motorized movement per beam 1 Vacuum pumps 250 m3/h Controls : On Windows PC RM850 remote control with integrated LCD screen 2 pedals for cycle start Controlled by BiesseWorks software Ljlsuaz H Ishccqpehg BiesseWorks Advanced software machine version: Programming and optimization of drilling, cutting, milling, toolpaths and tool changes Customized parametric macros Network and/or USB file imports 3D part and toolpath simulator Parametric programming of the workpiece Collision management Tooling set and parametric cones supplied Power and Motors Voltage: 400 V Pluging: Three-phased Power: 17 Kw Motor: 18 CV Overall dimensions Lenght: 5412-5912 mm Width: 5120 mm Height: 2910 mm

Condition: ready for operation (used), Technical characteristics 3-axis spindle, 11 kW, 1000 to 24000 rpm 10 Y / 10X vertical drilling unit 6 X / 2 Y horizontal drilling unit XNG digital control 8-position on-board tool loader + pick-up loader on frame Machine to be restarted dimension plan de travail en Y1640 mm Dimension plan de travail en X3430 mm Caractéristiques usinageDrilling unitOnboard tool chargerNesting table Lolhcet Rrdaocqpjhg Power and Motors Overall dimensions

Condition: ready for operation (used), Technical characteristics 8 suction cup beams + vices Electrospindle 10.5 CV ISO 30 8 on-board tool carrier charger 20 vertical spindles and 4 horizontal spindles drilling unit Machine to be restarted dimension plan de travail en Y1630 mm Dimension plan de travail en X3430 mm dimension plan de travail en Z185 mm Nombre de poutres8 Lholhccqotqkbbopsg Caractéristiques usinageEvacuation conveyorVacuum pump Capacité pompe à vide100 m3/h Power and Motors Overall dimensions