Used Biesse Techno Logic for sale (343)

Condition: used, machine/vehicle number: 008125, Type of edging: Thin edge, Thick edge Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Max feed speed: 18 m/min Gkedpfx Ake Aax Hkehjd Operating Units: 7 nr

Condition: used, machine/vehicle number: 007849, Max. panel width: 1000 mm Max. panel length: 2200 mm Length of conveyor: 9000 mm Introduction system: with pushers Godpfx Aowkfzzekhskd

Condition: used, Year of construction: 2018, Numerical Control BH 660 with BIESSE BSolid software bEdge module for edge management bSolid surface design Sophia - IoT Connection Office control Working range on X-axis mm 3228 Working range on Y axis mm 1580 Working range on Z axis mm 200 with H74 mm suction cups Working range on Z axis mm 245 with H29 mm suction cups No. 8 adjustable ATS panel support bars Installation of the pneumatic lock divided into two zones in Y No. 6 Pneumatic Bakelite bars for panel lifting Gsdeugpwnspfx Akhskd No. 3 adjustable suction cups for bar Set-Up Assistant for Suction Cups No. 1 electrospindle (pantograph) with 4 axes, automatic tool change, KW 13 (HP 17.4) motor, cooling liquid, HSK cone attachment, 20000 RPM Automatic tool change with 16 positions on the X-axis of the carriage Drilling tesa BH17 independent spindles arranged as follows: No. 5 independent spindles for vertical drilling in the "X" direction No. 5 independent spindles for vertical drilling in the "Y" direction No. 4 spindles for horizontal drilling in the "X" direction No. 2 spindles for horizontal drilling in "Y" direction No. 1 blade integrated into the drilling head diam 120 mm (useful cut 25 mm) GU60L gluing unit for EVA glue with pre-melter - edge pressure system with double rubber roller for spokes maximum internal 30 mm and edge joint sensor - 500 ml glue pot installed on the glue roller - lamp edge heating - edge feed system - edge cutting system - possibility of Introduction of the manual edge Plastic edge thickness from 0.4 to 3 mm Wood edge thickness from 0.4 to 2 mm Laminated edge thickness from 0.4 to 1.2 mm Maximum edge width 65 mm Workpiece thickness from 10 to 60 mm Minimum internal radius workable with 30 mm edging Maximum external radius for edging, proportionate to the thickness and stiffness of the edge: * 10 mm with edge up to 1 mm thick * 20mm with 2mm thick edge * 30mm with 3mm thick edge Minimum dimensions of the edging panel 300 x 300 mm Minimum internal diameter for edging: 350 mm with plastic edges less than 1 mm thick and with panel maximum thickness 18 mm 2-position edge storage unit positioned inside the protective casings for edges with maximum thickness 65 mm Finishing aggregate cleaning station with automatic dispensing of special cleaning liquids and with a cleaning cycle No. 1 aggregate for edge trimming / rounding No. 1 EF60A combi aggregate trimmer / edge scraper / glue scraper Perimeter protection grids Chip evacuation system with motorized belt Liquid cooling system Automatic lubrication system No. 1 vacuum pump of 250 m3/h TECHNICAL DETAILS TO BE CONFIRMED

Condition: used, machine/vehicle number: 007685, Type of edging: Thin edge, Thick edge, Solid wood Gksdjy Nkqfepfx Akhjd Gluing System: PUR Corner Rounding Unit: yes Combination Squaring Edgebanding Machine: First and Second Pass Max Panel Width: 3200 mm Operating Units Right Side: 15 nr Operating Units Left Side: 15 nr

Condition: excellent (used), C.N.C. WORKING CENTER with 3 axes (X-Y-Z) - Goose-neck type machine Movable panel (workpiece), static working head, Horizontal position of the panel (workpiece) Numerical Control with Software BiesseWorks (Separate electric and command cabinet) Safety cabin (enclosure) of the working head, Front emergency carpets In-feeding working table (panel support) No. 2 Workpieces fixing clamps (for the panels introduction in the working area) Out-feeding table (with motorized belts) Minimum workpieces dimensions (X - Y - Z) mm 90 x 70 x 8 (ca.) Maximum workpieces dimensions (X - Y - Z) mm 3000 x 1300 x 60 (ca.) Two panels that can be processed simultaneously (on the Z-axis) Automatic panel dimension detection system (on the X and Y axes) BOTTOM WORKING UNITS (BH41): Gkjdszyalkjpfx Akhjd No. 31 Independent vertical boring spindles (No.) 31 No. 10 (8 X + 2 Y) Independent horizontal boring spindles No. 1 Circular Grooving Saw (on X axis) dia. (mm) 160 (N° 1 x kw 5) No. 1 Vertical electro-spindle ISO 30 (N° 1 x kw 6,5) No. 1 Horizontal electro-spindle (N° 1) on the Y axis TOP WORKING UNITS (BH41): No. 31 Independent vertical boring spindles (No.) 31 No. 10 (8 X + 2 Y) Independent horizontal boring spindles No. 1 Circular Grooving Saw (on X axis) dia. (mm) 160 (N° 1 x kw 5) No. 1 Vertical electro-spindle ISO 30 (N° 1 x kw 6,5) No. 1 Horizontal electro-spindle (N° 1) on the Y axis

Condition: ready for operation (used), Year of construction: 2009, Travel ranges working area 1: X: 6450mm, Y: 1535mm, Z: 250mm, working area 2: X: 6200mm, Y: 1535mm, Z: 250mm, working area 3: X: 6200mm, Y: 1520mm, Z: 275mm, axis travel configuration 1: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 2: X: 6820.5mm, Y: 1963mm, Z: 350mm, axis travel configuration 3: X: 6820.5mm, Y: 1963mm, Z: 663mm (5-axis head), Z: 350mm (additional machining units), control: Biesse XP600. Maintenance: complete C-axis was replaced in 2015 including accessories, vacuum pump was fully replaced in 2016 including bellows, hoses and additional components, in 2021 the machine was equipped with a new high-performance control PC running a current Windows 10 operating system. With extensive documentation. An on-site inspection is possible. Godpfxjylziie Akhekd

Condition: used, Year of construction: 2009, Biesse Works Control Working range on X axis mm 3500 Working range on Y axis mm 1585 Working stroke in Z axis mm 350 N ° 2 work fields Bar worktop No. 8 adjustable bars N° 4 pneumatic Bakelite bars for lifting the panel No. 3 adjustable suction cups for each bar with vacuum seal for fixing the panel during processing No. 1 4-axis vertical electrospindle (Vektor), with automatic tool change, HSK type cones 10-position rotary tool change system on the operating head 24-position chain tool change system - located on the rear of the chain machine Drilling head with vertical and horizontal spindles composed as follows: n. 12 vertical spindles in X n. 12 vertical spindles in Y n. 6 horizontal spindles in X n. 4 horizontal spindles in Y n. 1 independent blade for making X-grooves Front protection and safety system with carpets Perimeter protection grids Chip evacuation system with motorized belt Air conditioning system for cooling and cleaning of machine control Vacuum pump 250mc/h TECHNICAL DETAILS TO BE CHECKED Gsdpfew D Dhajx Akhskd

Condition: not inspected (used), Year of construction: 1999, functionality: unexamined, 24 vertical spindles, 10 horizontal spindles, 7-position tool changer, 8 vacuum worktables with digital position display, interchangeable angle gearbox. Usable length of the workpiece support: 3200 mm, width of the workpiece support: 925 mm. Gkedpfx Aex Iulwokhjd

Condition: excellent (used), FULL LINE (4-SIDES) of Sizing-Milling & Edge Banding, with fast automatic handling. also for NARROW PIECES (min. mm 65). With 3 full-CN drilling machines (1 for side-drilling on lenghtwise) and 1 Splitter Composed of the following machines: W05024A) Loader (gantry-portal) "RBO (BIESSE)" Mod. Winner C W05024B) 1st Single-side (Left) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024C) 2nd Single-side (Right) Sizing & Edge Bander "BIESSE" Mod. Stream SB1 TWIN W05024D) 1st 90° Turning device "RBO (BIESSE)" Mod. GPK-1 (Lengthwise to Crosswise) Gkedpfxotr Envs Akhod W05024E) Double-side Sizing & Edge Bander "BIESSE" Mod. Stream SB2 / 11.0 W05024F) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024G) Multi-Borer, with CN "BIESSE" Mod. Techno FDT W05024H) 2nd 90° Turning device "RBO (BIESSE)" Mod. GPK-2 (Crosswise to Lengthwise) W05024I) Multi-Borer, with CN "BIESSE" Mod. Techno FDT (side-drilling on lenghtwise) W05024J) Splitting Saw (Splitter) Lengthwise "TECNOLOGICA" W05024K) Brush-cleaning machine "WANDRES" W05024L) Stacker (Bridge-Frame) "RBO (BIESSE)" Mod. Winner S

Condition: good (used), Year of construction: 2006, I sell the widebelt sanding machine Biesse Regal 520 - 1350, year 2006. Configuration: 1pc. electronic segmented pad 1pc. electronic segmented pad Working width 1350mm Pressure rollers for short elements. Air-blow on both units. Total weight 3050kg Condition very good. Gedpfjzkmdhsx Akhekd Available immediately.

Condition: used, machine/vehicle number: 007647, Position 1: Single Edgebanders BIESSE + FORMETAL-AKRON1445 B AIRTEC Position 2: Panel Return Systems BIESSE + FORMETAL-AKRON1445 B AIRTEC Gedowukywopfx Akhskd

Condition: ready for operation (used), Year of construction: 2023, operating hours: 6 h, travel distance X-axis: 2,465 mm, travel distance Y-axis: 1,260 mm, travel distance Z-axis: 378 mm, number of axes: 5, This 5-axis BIESSE ROVER PLAST A FT 1224 was manufactured in 2023. It features a working area of 2465 mm x 1260 mm and a Z-axis stroke of 378 mm. The machine is equipped with a powerful 13 kW machining unit capable of up to 20,000 RPM. If you are looking to get high-quality CNC wood machining capabilities, consider the BIESSE ROVER PLAST A FT 1224 machine we have for sale. Contact us for further details. Gksdpfx Akjz H Rk Ujhod • Working Area / Table Dimensions: X = 2465 mm, Y = 1260 mm• Z-Axis Stroke: 378 mm• Maximum Axis Speed: X = 85 m/min, Y = 60 m/min, Z = 20 m/min• Maximum Piece Passage in Z: 200 mm (170 mm with Sweeper Arm)• Worktable Type: FT PLUS phenolic layer table with 30 mm grid layout, 12 mm MDF matrix plate• Vacuum System: Multi-zone vacuum system (4 independent zones)• Vacuum Pump: 1x 250 m³/h cam vacuum pump (dry running, maintenance free)• Machining Unit: 5-interpolating axes machining unit, 13 kW (17.4 HP) S6 / 11 kW S1, HSK F63 adapter, liquid-cooled, up to 20,000 RPM• Axis Angles: C-axis 360° continuous rotation, B-axis +/- 150°• Coolant Unit: Liquid cooling system (absorbs 1600 W) for electrospindle• Tool Tool Changer / Magazines:• 13/16-position linear side tool changer mounted on machine bed• 8-position revolving tool changer mounted on X-carriage• Measuring Systems: Digital tool length presetter (for diameters up to 130 mm)• Software: BH660 PC-based control with WRT (Windows Real Time), bSolid (3D CAD/CAM), bSolid 3-Axis & 5-Axis machining modules, bNest (Nesting module), bSolid File Import Module• Additional Features:• LED light strip for work area illumination & L-shaped LED projector for vacuum pod positioning• Ionizer for static charge reduction on plastics• Tool lubrication system (air-oil mist) for non-ferrous material processing• Wired remote control pad• Uniclamp adapters (4x) and Uniclamp clamping devices (4x, H=74mm)• Vacuum modules: 6x (132x146 H74mm), 4x (132x75 H74mm), 4x (132x54 H74mm)• Air cushion blower for easy loading/unloading• Barcode scanner (1D wireless)• UPS backup for machine PC (7-10 min power backup)• Power Supply: 400 V / 50 Hz, 3-phase (without neutral conductor), voltage tolerance +/-10%Safety Standard: CE / UKCA with Full Bumper safety system and protective enclosure

Condition: used, Technical Data Machining Area - X = 3200 mm - Y = 1250 mm Workpiece Dimensions - Length X: 200 - 3200 mm - Height Y: 35 - 1250 mm - Thickness Z: 8 - 60 mm - Maximum workpiece weight: 50 kg Workpiece Reference System The preliminary positioning of the workpiece in the longitudinal direction (X-axis) is performed in the loading area on the left side of the machine by means of a stop, which is placed in a fixed position in the work table. Workpiece Positioning Unit The workpiece positioning system in the X-axis is achieved by two clamping jaws that hold the workpiece during the machining process. The movement is controlled by two independently driven servomotors. Workpiece Support Surface The workpiece support surface, on which the machining units are located, consists of a series of rubber-coated rollers that form the workpiece reference in the Z-axis. On the opposite side of the machining unit, a counter-pressure system is installed, which optimally holds the workpiece in the machine. Converter and voltage connection for voltages of 380 - 415 V (+-10%), 50/60 Hz Air conditioning unit for the electrical control cabinet bSolid control system HP kit for the rapid movement of the workpiece clamping jaws The combined system, with servomotor and precision planetary gearbox, enables movement speeds of up to 110 m/min with fast acceleration ramps. Consent pedal for opening/closing the clamping jaw BH28 drilling head with individually addressable spindles - 17 vertical spindles (7 in the X-axis, 10 in the Y-axis) - 5 horizontal spindles (3 in the X-axis, 2 in the Y-axis) - 1 dado blade unit with a fixed working direction in X 11 kW electric spindle with HSK-F adapter with "C" axis torque - 11 kW, 24000 rpm in S1 operation - 6000 - 24000 rpm programmable via NC Angle saw unit HSK F63 for saw blade - Max. speed 8,400 rpm Drilling and milling unit for top and bottom edges / end drilling and milling unit - Max. speed 9,000 rpm - Tool holder with ER20 collet 8-position tool changer magazine - disc changer Accessory kit "Sensitive Surfaces" for workpiece transport Laser device for manual reading of QR codes Gjdpfx Aezutraekhekd SOPHIA - IoT Connection Dowel Ø8x40 mm and glue insertion unit Barcode2Hops with variables MultiPost upgrade POST_Element Splitter NC-Hops 7.0

Condition: used, Technical Data Workpiece Dimensions - Length: 90 - 3,000 mm - Width: 70 - 1,000 mm - Thickness: 8 - 60 mm Working Ranges X-Axis - Vertical Drilling: 0 - 3,000 mm - Horizontal Drilling (X and Y): 0 - 3,000 mm - Through Milling: 0 - 2,500 mm - Partial Milling: 0 - 3,000 mm Godpfx Aszutrtskhekd - Through Grooving with Saw (X-direction): 0 - 2,500 mm - Partial Grooving with Saw (X-direction): 0 - 3,000 mm Y-Axis - Vertical Drilling: 0 - 1,000 mm - Vertical Drilling with 32-mm System: 32 - 1,000 mm - Horizontal Drilling in X: 0 - 1,000 mm - Horizontal Drilling in Y-direction: 90 - 1,000 mm - Milling: 0 - 950 mm - Grooving with Saw (X-direction): 112 - 1,000 mm Z-Axis - Material Thickness: 0 - 60 mm Equipment The machine is equipped with 78 independent drilling spindles, distributed across two mirror-image processing units: - 39 spindles in the upper unit - 39 spindles in the lower unit Each processing unit includes: - 29 vertical drilling spindles (19 along the X-axis and 10 along the Y-axis, 32 mm spacing) - 8 horizontal drilling spindles along the X-axis (4 with dual outlets) - 2 independent horizontal drilling spindles in the X-direction - 2 independent horizontal drilling spindles in the Y-direction - 3.5 kW HSK electro-spindle - Spindle speed: 6,000 - 18,000 rpm Optional Equipment - Roller loading table - Upper and lower work tables (pressure tables) - Upper and lower processing units - Right-hand side strip unloading conveyor - Electronic thickness control - Central automatic lubrication - PC-based CNC control (Windows XP 600 with Soft CN) - Safety system

Condition: ready for operation (used), Year of construction: 2011, machine/vehicle number: 65352, functionality: fully functional, travel distance X-axis: 3,765 mm, travel distance Y-axis: 1,585 mm, travel distance Z-axis: 170 mm, number of axes: 3, number of slots in tool magazine: 12, TECHNICAL DETAILS Milling spindle Number of controlled axes: 3 Tool holder: ISO 30 Motor power: 1.7 kW Drilling unit Drilling tool available: Yes Vertical drilling spindles: 10 pcs. Table and working area Type of milling table: Flat table Table length: 3,750 mm Table width: 1,560 mm Working area X-axis: 3,765 mm Working area Y-axis: 1,585 mm Working area Z-axis: 170 mm Z-axis travel max.: 324 mm Material clamping system: Pneumatic Tool changer and control Number of tool changer positions: 12 pcs. MACHINE DETAILS System/Software: BiesseWorks Vacuum pump Brand: Busch Type: MM1322AVM Capacity: 360 m³/h Connection diameter: 60 mm Oil-free: Yes Dimensions & Weight Dimensions (L x W x H): 5,600 x 2,250 x 2,550 mm Installed length: 6,465 mm Installed width: 4,794 mm Installed height: 2,550 mm Gkodezuwt Ijpfx Akhjd Shipping weight: 2,500 kg Shipping packages: 2 pcs. EQUIPMENT Tools included Vacuum pump Busch MM1322AVM Safety mat CE marking

Condition: used, Year of construction: 2019, Smart Touch Numerical Control with Sintra HD Software Panel height 10 - 60 mm 22 mm solid wood Pvc / Abs mm 3 Feed speed up to 25 meters / min Working height electronically adjustable by C.N. Motorized rubber belt with higher pressure Motorized and electronically adjustable panel support guide by C.N. Side roller conveyor with idle wheels for panel support ADZ-700 anti-adhesive group Rectifier unit with 2 electronically adjustable motors by C.N FI-502 Lamps to heat the edge of the AdIRL-700 panel Reel holder plate at 1 position Gluing unit for EVA hot melt glue with QM-705 glue pot Additional glue tank Edge pressure group on straight profiles with electronically adjustable pressure rollers by C.N. Anti-adhesive group End trimming unit with 2 IN-801 motors Offset trimming / gleaning unit with 2 motors electronically adjustable by C.N RF400 PRO-NESTING KIT for gleaning unit Non-stick group Rounding unit with 2 multifunction motors (gleaner + rounder) AR30 NC LPT-700 non-stick liquid application system Electronic edge scraper unit electronically adjustable by C.N RB400 PRO-NESTING KIT for edge scraper group Gkedpfx Aksr Ip Sdohsd RCC-701 glue scraper unit Brush group "SP-501" "PH-700" hairdryer group

Year of construction: 2001, condition: ready for operation (used), Biesse Rover 22 CNC machining centre Year of manufacture 2001 SN 07498 Working range 4 axes X-axis 3060 mm Y-axis 1080 mm Z-axis 155 mm 6 consoles with 18 vacuum cup holders 4 pneumatic bakelite bars for lifting the platen Vertical electrospindle 7,5 kW with automatic tool change, ISO 30 taper Automatic tool change 7 positions on the working head Drilling head with 20 spindles arranged as follows: 7 vertical in X-axis 7 vertical in Y-axis 4 horizontal in X-axis 2 horizontal in Y-axis Gkjdpjggxihsfx Akhod Grooving saw 120mm Safety tread mats 110 m3 / h vacuum pump CE marked Weight 3500 Kg Technical specifications subject to change

Condition: used, machine/vehicle number: 008689, X axis working area: 6735 mm Y axis working area: 1650 mm Working Table: Pod and Rail Main Electrospindle power: 13.2 KW Number of controlled axes: 4 axes Maximum edge height: 65 mm Gjdjznuxbjpfx Akhekd Total number of drilling spindles: 30 Total number of tool changer positions: 22

Condition: used, machine/vehicle number: 008566, X axis working area: 3000 mm Y axis working area: 1300 mm Main Electrospindle power: 6.5 KW Number of controlled axes: 3 axes Total number of drilling spindles: 82 Gkedpfjzvwprex Akhjd

Condition: ready for operation (used), Year of construction: 2022, machine/vehicle number: 1000056636, functionality: fully functional, cutting width (max.): 3,200 mm, total length: 8,000 mm, overall weight: 3,969 kg, cutting length (max.): 3,200 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Max. cutting width: 3,200 mm MACHINE DETAILS Dimensions & Weight Gkjdoy Nxvcepfx Akhsd Dimensions (L x W x H): 8,000 x 2,400 x 2,400 mm Weight: 3,969 kg Supply voltage: 400 VAC Number of supply phases: 3 Power: 4 kW Frequency: 50 Hz EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2014, operating hours: 1,618 h, travel distance Z-axis: 430 mm, number of axes: 5, number of slots in tool magazine: 16, table length: 4,300 mm, table width: 2,205 mm, spindle motor power: 13,000 W, spindle speed (max.): 20,000 rpm, swivel angle B-axis (min.): -99 °, swivel angle B-axis (max.): 100 °, swivel angle C-axis (max.): 360 °, This 5-axis BIESSE Rover A FT 2243 including WINSTORE 3D K1 was manufactured in 2014. It operates on a 400 V power supply. With approximately 1,700 hours of axis movement, this CNC wood machining centre is designed for precision and efficiency. If you are looking to get high-quality wood machining capabilities, consider the BIESSE Rover A FT 2243 machine we have for sale. Contact us for further details. Technical Data • Working Table Dimensions: 4,300 × 2,205 mm • Maximum X-Axis Speed: 80 m/min • Maximum Y-Axis Speed: 60 m/min • Maximum Z-Axis Speed: 20 m/min • Z-Axis Travel (3-/4-Axis Version): 325 mm • Z-Axis Travel (5-Axis Version): 430 mm • Maximum Workpiece Clearance in Z: 170 mm • Maximum Workpiece Clearance with Sweeping Arm: 120 mm • X-/Y-Axis Drive: Rack and Pinion • Z-Axis Drive: Ball Screw • Axis Guides: Linear Guides with Recirculating Ball Bearing Blocks • Vacuum Pump Capacity: 300 m³/h at 50 Hz • Vacuum System: 20 Independent CNC-Controlled Zones • Working Fields: 2 • Clamping Areas: 2 in X • Pneumatic Stops: 16 • Grid Table Pitch: 30 mm • Vacuum Module Dimensions: 132 × 146 mm • Vacuum Module Height: 29 mm • Vacuum Module Rotation Increment: 15° • Air Cushion Table Blower: Yes • Maximum Single Panel Thickness: 50 mm Gksdezuygqjpfx Akhsd • Minimum Single Panel Thickness: 9 mm • Maximum Multiple-Panel Loading Thickness: 20 mm • Maximum Multiple-Panel Unloading Thickness: 60 mm • Protective Board Thickness: 8–25 mm • Maximum Panel Weight: 200 kg • Minimum Loadable Panel Size in Y: 800 mm • Unloading Conveyor Length: 4,800 mm • Maximum Unloadable Panel Length: 4,300 mm 5-Axis Machining Unit • Number of Axes: 5 Interpolating Axes • Tool Interface: HSK F63 • Cooling: Liquid-Cooled • Power S1: 11 kW / 15 HP at 12,000 rpm • Power S6: 13 kW / 17.4 HP at 12,000 rpm • Maximum Spindle Speed: 20,000 rpm • C-Axis Rotation: 360° Continuous • C-Axis Speed: 12.4 rpm • B-Axis Positioning Range: ±100° • B-Axis Speed: 12.4 rpm • Spindle Bearings: Ceramic • Drive Motor: Brushless, Digitally Controlled • Gearbox: Harmonic Reduction Gear • Lubrication: Lifetime Lubrication Drilling Head • Type: BH 26 2L • Maximum Number of Tools: 26 • Vertical Drilling Spindles: 16 • Vertical Spindle Arrangement: 8 in X / 8 in Y • Vertical Spindle Pitch: 32 mm • Horizontal Drilling Spindles: 4 with Double Output • Horizontal Spindle Axis Distance: 32 mm • Grooving Saws: 2 • Grooving Saw Directions: X / Y • Grooving Saw Diameter: 120 mm • Maximum Grooving Depth: 25 mm • Motor Power: 1.7 kW at 2,800 rpm / 3 kW at 6,000 rpm • Maximum Drilling Speed: 6,000 rpm Tool Magazine • Type: Turret Tool Magazine • Capacity: 16 Tools • Tool Position Spacing: 114 mm • Maximum Tool Diameter with Full Magazine: 110 mm • Maximum Individual Tool Weight: 7.5 kg • Maximum Total Tool Weight: 55 kg Automatic Loading / Unloading • Loading Direction: Front • Material Flow: Right to Left • Loading / Unloading System: Type B • Suction Cups: 5 • Automatic Loading Capacity: Up to 3 Panels • Sweeping Arm: Yes • Automatic Table Cleaning: Yes • Loading Table: Automatic X/Y Alignment • Unloading Conveyor: Motorized • Conveyor Control: CNC-Controlled • Conveyor End Detection: Photocell WINSTORE 3D • System: WINSTORE 3D K1 • System Length: 16,000 mm • Beam Length: 8,000 mm • Additional Modules: 3,000 / 6,000 / 8,000 mm • Maximum Suction Frame Length: 5,200 mm • Cross Conveyors: Belt Type, 5,200 mm • Panel Handling: Raw and Thin Panels • Panel Weight Detection: Load Cell

Condition: used, machine/vehicle number: 008250, Position 1: Single Edgebanders BIESSE-STREAM B1 9.0 Gkedpsx Dipmefx Akhod Position 2: Roller Conveyors BIESSE-STREAM B1 9.0 Position 3: Single Edgebanders BIESSE-STREAM B1 9.0

Condition: excellent (used), workpiece length (max.): 6,700 mm, workpiece width (max.): 1,900 mm, workpiece height (max.): 290 mm, number of axes: 5, Rover B edge 1967 5 axis 13,2KW liquid cooled Gsdpfeylcgpox Akhokd drilling head BH40L 29vertical +10horizontal + saw Automatic pod and rails position Edge banding Aggregates for edge banding uniclamp vertical + horizontal Very good condition

Condition: excellent (used), 200030A) C.N.C. WORKING CENTER "NESTING" with 3-axes "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control with Software bSolid (3D CAD-CAM) + bNest Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with Tools storage plates Storage (revolver-type) with 8 folds (on Y-axe) Max. useful working area (X - Y - Z) mm 3100 x 1560 x 60 Gkjdpfx Akjzygiiehed Vacuum pump 1 x 300 m3/h Separate electric and command cabinet WORKING GROUPS (TOP): No. 14 independent vertical boring spindles (7 in X + 7 in Y) No. 4 independent horizontal boring spindles (2 in X + 2 in Y) Drilling head BH 18 motor-power (Kw) 3 ca. No. 1 vertical Electro-spindle HSK F63 (Kw) 13,2 200030B) UNLOADING with roller conveyor (length approx. 3,500 mm)

Condition: excellent (used), "NESTING" CELL with 3-axes (X-Y-Z+ C-axis capability) CNC working Center, composed by: 200029A) AUTOMATIC LOADING/IN-FEEDING SYSTEM (type A 1563) also for thin panels, with scissor table, movable arm (NC positioning Sweeping Arm) with vacuum suction cups, 200029B) CNC "nesting" 3-axes (flat table) "BIESSE" Mod. Rover A - FT 1531 Gantry-drive (axe X) machine Numerical Control (WRT) with Software bSolid (3D CAD-CAM) + bNest (SOPHIA - IoT Connection) Safety cabin (enclosure) of the working head Bumper Unique flat working table FT Automatic Tools Changing System with two (2) Tools storage plates 1st Tools storage plate with 16 folds (on X axe) + 2nd storage (revolver-type) with 8 folds (on Y-axe) Max. useful working area (X - Y - Z) mm 3100 x 1560 x 170 No. 8 Working areas (Multizone) - No. 3 Vacuum pumps (capacity 250 m3/h each) Separate electric and command cabinet - Total installed power (Kw) 31,21 Godpfx Ajzxrnbskhokd WORKING GROUPS (TOP): No. 14 independent vertical boring spindles (7 in X + 7 in Y) No. 4 independent horizontal boring spindles (2 in X + 2 in Y) Drilling head BH 18 motor-power (Kw) 3 ca. No. 1 vertical Electro-spindle HSK F63 (Kw) 13,2 200029C) AUTOMATIC OUT-FEEDING SYSTEM (type 1531) with motorised belt (length mm 3740)