Used Bimak Drill for sale (4,462)

Condition: used, Year of construction: 2008, Nagel Digifold Creasing and folding in a single operation Feeding: Suction feeder draws paper from below Maximum paper size (mm) L x W: 700 x 358 Minimum paper size (mm) L x W: 210 x 140 Maximum paper weight (gsm): 400 Minimum paper weight (gsm): 100 Max. number of creases per sheet: 9 Max. number of folds per sheet: 2 Giedoyhztkspfx Aaden Max. number of program memory locations: 9 Min. distance between two creases (mm): 40 Min. distance between two folds (mm): 70 Min. distance from leading edge to first crease (mm): 50 Min. distance from leading edge to first fold (mm): 50 Min. distance from trailing edge to last crease (mm): 50 Min. distance from trailing edge to last fold (mm): 50 Min. fold length (mm): 70 Max. fold length (mm): up to 450 (automatic feeder), up to 1,800 (manual feed) Fine adjustment (mm increments): 0.1 Max. speed (A4 sheets/hour): 5,000+ Dimensions (mm): 1,980 x 655 x 1,265 (L x W x H) Weight (kg): 190 Power supply (V): 220

Condition: good (used), Spindle diameter: 75 mm Spindle taper: MK 5 Table clamping surface: 900 x 710 mm Travel: X-axis, transverse: 850 mm Y-axis, vertical: 750 mm Giodpsxtu D Uofx Aaden Z-axis, longitudinal: 1050 mm W-axis, quill: 600 mm B-axis, table: 360° Table load capacity: approx. 3,500 kg Speed range: 20 - 1,000 rpm Feed range: yes Rapid traverse: yes Drive power: 12 kW Dimensions (L x W x H): 3,950 x 2,200 x 2,200 mm Weight: 5,800 kg Accessories / Special features: • 3-axis digital readout, brand FAGOR • Full machine control via swiveling control panel • Machine bed cast in one piece • Spindle with forward/reverse rotation • Feed and rapid traverse • Coolant pump • Emergency stop switch • Additional spindle adaptor DIN 55027 size 8 fitted to the drilling spindle, e.g., for mounting a 3-jaw chuck or a faceplate At the end of the machine bed, there is a table guide with drive, suitable for attaching a steady rest. Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Drilling machine, bench drill, pillar drill, column drill -Manufacturer: Flott, Pillar drill type 23 mm -Spindle mount: MK3 -Motor: 1.1 kW -Speed adjustment: via V-belt -Speeds: 200 - 2000 rpm -Table size: 300 x 300 mm -Spindle mount: MK3 Giedpfxsyaptxj Aadon -Travel distance: 1440 mm -Spindle stroke: 145 mm -Protrusion: 300 mm -Column Ø: 125 mm -Dimensions: 900/450/H1900 mm -Weight: 306 kg

Condition: used, Year of construction: 2006, functionality: fully functional, BARGSTEDT LOADER BARGSTEDT TURNER (front side/back side) WEEKE THROUGHFEED DRILLING PROFI LINE BHH 35 WEEKE THROUGHFEED DOWEL INSERT BST 100 Giodowrdg Eopfx Aadsn BARGSTEDT UNLOADER

Condition: used, machine/vehicle number: 007841, X axis working area: 4200 mm Y axis working area: 1200 mm Working Table: Pod and Rail Gijdpfjyg Ef Djx Aaden Main Electrospindle power: 18 KW Number of controlled axes: 4 axes Maximum edge height: 64 mm Total number of tool changer positions: 18

Condition: used, Attachment suited for: Construction machines Gjdpfx Aoydklkoadjin

Condition: used, Year of construction: 2004, operating hours: 10,948 h, 2004 | Soilmec R620 | Used Drill | 10948 hours 📍Location: France 🚛 Delivery available to your destination – Use our shipping calculator to estimate transport costs! 💰 Buy Now for EUR 121000 or Make an Offer. Payment at delivery available for an affordable fee (subject to approval)* 👷‍♂️ Inspected by an independent expert 68 inspection points 55 approved ✅ 11 imperfect ℹ️ 2 issues ⚠️ 📌 Inspector's Comment: The drill is in good working condition. You can see the full report for all of the attachments that are included with the machine. Maybe new batteries will be needed, since the machine has not worked for about 1 year. The drill was not able to be fully tested on-site. It has a variable truck frame and 4 core drills. 📄 Want to see the full inspection, extra photos, or a video? Tip: The reference "40269 Equippo" is commonly used when looking up more details online. 💡 Why this machine and our service stands out: ✔ Thorough inspection by professionals ✔ Jobsite delivery available ✔ Money-Back Guaranteed ✔ Secure and flexible payment options Gijdsygxtzopfx Aadsn 🔄 Considering other equipment options? We offer helpful tools and resources for all equipment owners and operators – easily accessible on our platform.

Condition: new, The SSB 40 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to finishing operations. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed with an intuitive manual transmission. You can expect exceptional performance for your drilling needs. For more information or to request a quote, consider the SSB 40 F Super VT, a top choice in the Column Drilling Machines category. Godpfx Ajnp Hymeadjin

Condition: excellent (used), Year of construction: 2017, functionality: fully functional, power: 3.5 kW (4.76 HP), input voltage: 400 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, Z. Bavelloni VT1250SA + L automatic horizontal drilling machine with 2 drilling heads (upper and lower). The machine is in very good working condition, equipped with a laser for drilling hole positioning and an inverter for spindle speed adjustment. It will be delivered with a set of diamond drilling tools. The machine has a water tank and water pump. Godpfxoyghh Ue Aadein

Condition: ready for operation (used), Year of construction: 2006, Speeds up to: 2250 rpm Feed rate: 0 - 300 mm/min Drive power per motor: 2.9 kW Electrical connection: 400 V Godpfxsyfgd Ej Aadoin Weight: 395 kg Required space: 4100 x 1670 x 1450 mm

Condition: used, Year of construction: 2002, bore capacity in steel (diameter) 50 mm Gijdpfx Ajv H Ermoaden arm length / mm workpiece height max. / mm Drilling capacity in steel (diameter): 50 mm throat depth: 1600 mm Spindle stroke: 315 mm Tool holder: MK 5 Total power requirement: 4.0 kW Machine weight approx.: 3.5 tonnes Space requirement approx.: 2.5x1.1x2.8 m

Condition: good (used), Year of construction: 1978, machine/vehicle number: G-271, High-speed radial drilling machine WEYRAUCH - SW 35 G Arm outreach: 1,200 mm Drill spindle taper: MT 4 Drilling capacity in ST 60: 32 mm Spindle speeds: 12 steps, 50 to 2,000 rpm Godjyhbukjpfx Aadsin Thread cutting capacity in ST 60: M27 Quill stroke: 160 mm Table size: 1,200 x 500 mm Baseplate size: 1,200 x 450 mm Electrical rating: 380 V / 2 kW Required space (L x W x H): 1,800 x 1,200 x 2,350 mm Weight approx.: 2,000 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1314, Radial Drilling Machine ALZMETALL - AB 30 R Arm reach: 800 mm Spindle taper: MK 4 Drilling capacity in steel: 45 mm Gsdpfx Aoyhbq Seadein Thread cutting device - up to M30 Spindle stroke: 160 mm Spindle speeds: 8 steps, 56 to 1,250 rpm Thread cutting steps: 4 - 0.15 / 0.2 / 0.3 / 0.35 mm/rev Clamping cube with T-slots: 550 x 480 x H - 500 mm Machine vice on rotary table - jaw width: 200 mm Space requirements: 1,600 x 700 x H - 2,250 mm Weight: 1,370 kg

Condition: good (used), Year of construction: 1977, machine/vehicle number: 1314, Radial Drilling Machine ALZMETALL - AB 30 R Arm reach: 800 mm Spindle taper: MK 4 Drilling capacity in steel: 45 mm Thread cutting device - up to M30 Spindle stroke: 160 mm Giodpfx Aaoyhbnksdsn Spindle speeds: 8 steps, 56 to 1,250 rpm Thread cutting steps: 4 - 0.15 / 0.2 / 0.3 / 0.35 mm/rev Clamping cube with T-slots: 550 x 480 x H - 500 mm Machine vice on rotary table - jaw width: 200 mm Space requirements: 1,600 x 700 x H - 2,250 mm Weight: 1,370 kg

Condition: used, Year of construction: 1984, Technical details: Godpou Ng Irsfx Aadsin grinding diameter min/max: 8 / 40 mm number of spindle speeds: 3000 U/min total power requirement: ca. 1,2 kW weight of the machine ca.: 0,24 t dimension machine xH: 0,7 x 0,9 x 1,3 m The grinding spindle is equipped with two hand levers: Working range left = manual grinding device for small shank drills. working range right = swiveling device of conical shank drills cutting angle max 180 Drill swivel arm small: clearance angle 5° - 9°; drill Ø 8 - 15mm manually adjustable; grinding wheel cup wheel Ø 200 x 40mm with holder Ø 32mm Drill swivel arm large: clearance angle 5° - 9°; drill Ø max 400mm; pitch 6x with index grid manual; grinding wheel currently clamped Ø 180 x 31mm with receptacle Ø 32mm Grinding modes: Normal grinding, DK grinding, center grinding, spiral countersink, multiple step drill. *

Condition: used, Year of construction: 1982, Technical details: dimensions of grinding wheel: Ø 150 x 20 mm grinding spindle speed: 3600 U/min height over floor: 900 mm current type: 220 V machine weight approx.: 27 kg dimensions L x W x H: 0,37 x 0,35 x 1,4 m Double sanding bench sitting on foot stand (foot Ø 353mm) Left side with drill grinding device (angle 90° - 180°), longitudinal adjustment 25mm Gijdpfxju Ngxds Aadsn incl. accessories *

Condition: used, Year of construction: 2003, functionality: fully functional, Brand/Model: REFORM RB 50/12 Year of manufacture: 2003 Condition: Very good Location: Spain Delivery/loading possible. Drilling diameter: 4–60 mm Godoyhw Udjpfx Aadoin Outreach: 1250 mm Max. workpiece height: 500 mm Spindle taper: MK5 Base area: 2000 x 980 mm Table clamping area: 640 x 500 mm Speed range: 25–2000 rpm Power input: 6.5 kW

Condition: new, The SSB 50 F Super VT, a robust Column Drilling Machine from KNUTH, is expertly designed for precision drilling, countersinking, reaming, and tapping in various settings, from maintenance tasks to industrial construction. This drill press features a sturdy construction with a thick-walled column and a large throat, ensuring stability and reliability during operation. With its advanced touchscreen control panel, users can easily select the necessary operating parameters, while the infinitely variable spindle speed allows for flexibility in machining. The motorized vertical movement of the setup table simplifies the handling of heavy parts, making it ideal for custom and small-series machining. Standard equipment includes a powerful LED work lamp, a coolant device, and an automatic quill feed. For those looking for a high-quality Column Drilling Machine, the SSB 50 F Super VT is an excellent choice. Request a quote today to learn more about this exceptional machine! Gedsnp Hp Iopfx Aadsin

Condition: used, Speed / U/min. Arm length / mm Gsdpsithz Uefx Aadein Motor output / kW

Condition: excellent (used), Year of construction: 2017, HOMAG CNC throughfeed drilling machine BHT500 Portal machining center for processing workpieces made of wood or wood-based materials. - Powercontrol System WoodWOP Giodpfx Aajx Rt Ateden - 17" TFT display - Vertical drilling units with up to 38 drilling spindles - Horizontal drilling units with up to 21 drilling spindles, individually selectable - 2 grooving saw units in X axis - Workpiece dimensions: length 250-2500mm / width 100-1400mm (or 2x 600mm) / thickness 12-60mm - Five-sided machining possible - Barcode reading system - Year of manufacture: 2017 - Immediately available

Condition: excellent (used), Deep hole drilling machine tools DEGEN - UTB MACH-ID 9188 Make: DEGEN Type: UTB Gisdpfx Aaox Tp Ahedjn Year: 2005

Condition: used, bore capacity in steel (diameter) // mm throat / mm bore stroke / mm ABARBOGA MASKINER GSMK6012 Drill press Godpoxn Aqrsfx Aadoin WITHOUT VISE

Condition: ready for operation (used), Year of construction: 1975, functionality: fully functional, throat depth: 1,280 mm, Radial Drilling Machine Manufacturer: WEBO Model: BR 40 Year of Manufacture: 1975 Condition: Good / Ready for immediate use Control: Conventional Max. arm reach: 1250 mm Distance cube table to base plate max.: 1100 mm Distance base plate to spindle nose: 450 - 1600 mm Spindle taper: MK 5 Drill spindle diameter: 40 mm Quill diameter: 85 mm Drill spindle stroke: 350 mm Speed range: 3 - 1800 rpm Feed rates: 0.12 - 2.0 mm/rev Drilling capacity in steel (diameter): 40 mm Clamping area of base plate: 1000 x 1350 mm Gijdpfx Ajyhdc Rsadsn Total base plate with T-slots: 2500 x 1000 mm Total power requirement: 7 kW Machine weight: approx. 4.5 t Space requirement: approx. 2.15 x 1.15 x 3.07 m Equipment: Drill table 500 x 500 mm with 3 T-slots Coolant system Thread cutting Column clamping via push-buttons in the handwheel

Condition: used, bore capacity in steel (diameter) / mm throat / mm bore stroke / mm total power requirement / kW Gijdpfx Ajxqrhfsadsn

Condition: used, Year of construction: 1988, bore capacity in steel (diameter) 50 mm arm length / mm Godpfswt Dwaex Aadjin workpiece height max. / mm Table dimensions: 1200x580mmTable dimensions: 1200x580mm