bore capacity in steel (diameter) 25 mm
throat -- mm
bore stroke 120 mm
tool taper MK 3
no. of turning speeds 8
speeds 65 - 3.060 U/min
feed manuell / manual
table surface area 300 x 270 mm
Cmne9lsm
Column-Diameter 100 mm
distance spindle center to column 250 mm
Motor output 0,82 / 1,2 kW
dimensions of the machine ca. 2,14 x 0,6 x 0,8 m
weight of the machine ca. 0,25 t
Boring power 28,0 mm
bore capacity in cast iron 32,0 mm
threading M20 / M24
bore stroke 150 mm
Center of spindle to wall or column 300 mm
Speed 150 - 3.000 U/min.
spindle taper MT 3 MK
Size of table plate 510 x 425 mm
T-slots 2 x 180 x 12 mm
distance spindle/base plate 1200 mm
column diameter 115 mm
voltage 380 V
Motor output 0,7 / 1,3 KW
weight of the machine ca. 365 kg
range L-W-H 750 x 650 x 1900 mm
Furnishing:
- stepless speed adjustment
- Right / left running of the drilling spindle
- T...
LISTING IS FOR A 10 SPEED PILLAR DRILL
Pvofae
IT IS A WORKING CONDITION
Single/3 phase motor
bore capacity in steel (diameter) 28 mm
throat 200 mm
bore stroke 105 mm
spindle taper MK 3
number of spindle speeds 12
Bgqhq98lwi
spindle speed: 35 - 5600 Upm
column diameter 92 mm
table-size 340 x 360 mm
table rotating 360 °
total power requirement 1,5 kW
weight of the machine ca. ca. 170 kg
dimensions of the machine ca. ca. 750 x 500 x 1800 mm
Very well maintained Alzmetall pillar drilling machine AB3 HST
drilling capacity in steel St 60: 28 mm
Mwerdk
drilling capacity in steel St 60: 40 mm
drilling capacity in cast iron GG 20: 35 mm
Spindle mounting: MK 3
Spindle speed: 130 - 3.500 rpm.
throat depth: 330 mm
spindle stroke: 180 mm
3 aut. feeds: 0,1 / 0,2 / 0,3 mm/rev.
bore capacity in steel (diameter) 25 mm
throat 255 mm
bore stroke 135 mm
spindle turning speed range 8, von 105-2900 U/min
table-size 500 x 350 mm
column diameter 100 mm
spindle taper MK 3
total power requirement 0,65 / 0,9 kW
weight of the machine ca. 190 kg
dimensions of the machine ca. 0,5 x 0,5 x 1,7 m
Condition: unused
Electric 380 Volt
W3ubo
Drill chuck
Machine dealer with own stock of 2500 m².
.
Technical data :
.
Drilling capacity 26 mm
Milling work suitable for light chip removal
6 speeds 200 - 1450 rpm
holder MK 3
quill stroke 100 mm
column diameter 120 mm
Igvh7rynk
head height adjustable 330 mm, swivelling and tilting
.
.
Boring power 25,0 mm
bore capacity in cast iron 30,0 mm
I3siu3d2
Center of spindle to wall or column 285 mm
bore stroke 90,0 mm
Size of table plate 340 x 280 mm
Speed 125 - 2500 U/min.
spindle taper MT 3 MK
voltage 400 V
Motor output 0,9/1,3 KW
weight of the machine ca. 205 kg
range L-W-H 460 x 740 x 1800 mm
Furnishing:
- manual spindle feed
- Pole changing motor
- V-belt drive
- Fixed drilling depth stop
- Height-adjustable work table, by hand crank
Manual Feed Electronic Variator drive Drilling Capacity 18-25-30 mm Spindle MT3 Variable speeds 120-760 rpm 170-1100 rpm 400-2580rpm 950 6000rpm drill depth 120mm machine weight 280kg coolant equipment CVR Dimensions 655x400x1900mm Displacement table fixed Headstock
Buyewntp9m
bore capacity in steel (diameter) 23 mm
throat 300 mm
bore stroke 150 mm
table-size 300 x 410 mm
spindle taper MK 2
total power requirement 1,4 kW
weight of the machine ca. ca. 315 kg
dimensions of the machine ca. ca. 700 x 900 x 1900 mm
Bgqhrjprkj
Max. drill Ø steel: 25mm
Max. drill Ø cast: 32mm
Max. tap Ø: 24M
Stroke pinole: 120mm
Throat: 295mm
Column sleeve: 115mm
Spindle Taper: 3ISO/Bt/Mk
Speeds / ranges: 3500Rpm
Table Length: 420mm
Table Width: 390mm
Power: 1,5 kW
Max. distance spindle – table: 297,5 mm
Bu9xawe8ip
Length: 750 mm
Width: 500 mm
Height: 1.990 mm
Weight: 380 kg
Please Note: The information on this page has been obtained to the best of our ability and belief ...
column drilling machine make WEBO type B 20
Make # 149/41
Technical data:
drilling capacity 20 mm
8 spindle speeds 125 - 1400 rpm.
Spindle mount MK 2
Projection 255 mm
spindle stroke 190 mm
Dwwpcy
Table size 450 x 360 mm
with 2 T-slots 14 mm
Drive power 1.3/ 1.1 kW
Dimensions 1000 x 600 x 1900 mm
Weight approx. 400 kg
with
- Foot switch
- Table height adjustable 400 mm
- head height adjustable approx. 250 mm
used, in good and functional condition
bore capacity in steel (diameter):23 mm
throat:280 mm
bore stroke:220 mm
Speed:1420 U/min.
feed:0,1 - 0,3 m/min
voltage:380 V
workpiece height max.:950 mm
surface area:500 x 500 mm
machined bearing plate::Ja
column diameter:140 mm
table swivable ca.:180°
total power requirement:1,1 kW
weight of the machine ca.:0,5 t
dimensions of the machine ca.:1,4 x 0,6 x 2,05 m
Y7m79xueu
Boring power 25,0 mm
bore capacity in cast iron 30,0 mm
morse taper MK 3
spindle stroke 200 mm
throat 293 mm
column diameter 115 mm
feed 0,15 mm/U
distance spindle/base plate 90 / 675 mm
table: 515 x 360 mm
T-slots 2 x 14 x 224 mm
turning speeds 65 - 1750 U/min
weight 380 kg
range L-W-H 750 x 600 x 1900 mm
Furnishing:
- automatic spindle feed
- stepless speed adjustment
- pole-changing motor
- Table height adjustment via hand crank / rack
Bvrx3rt33e
- Coolant device in the machine base
bore capacity in steel (diameter): 25 mm
throat: 310 mm
bore stroke: 220 mm
spindle turning speed - continuous: 40 - 1800 / 12 step U/min
spindle taper MT: 4
Distance spindle/table max.: max: 730 - min: 100 mm
feed: automatisch / 9 step mm/U
table clamping surface:: 450x580 mm
table-size: 550x660 mm
table adjustable: vertikal: 320 mm
table swivable approx.: nein
total power requirement: 6,6 kW
weight of the machine ca.: 652 kg
dimension machine xH: 1,1 x 0,7 x 2,3 m
Pb2rb
- drilling capacity Ø i...
bore capacity in steel (diameter) 23 / 28 mm
throat 260 mm
bore stroke 120 mm
tool taper MK 3
table-size 500 x 350 mm
Be02auhwjo
column diameter 100 mm
total power requirement 1,3 kW
weight of the machine ca. 400 kg
dimensions of the machine ca. 800 x 600 x 1750 mm
Defective feed!
Right-left rotation
stepless speed adjustment
DRILL PRESS SERRMAC ETD 22 - PGM
Rotating table + vice
Precise, silent and reliable
Direct transmission by INVERTER without pulley change
Precision spindle axis with tempered morse taper
Pfkzv
Power supply 380V 3
Rectified column.
Standard configurations :
- Digital display with spindle rpm indication
- Tapping with working depth adjustment
- LED lighting system 24 V
- Electronic membrane control panel
- Spindle rotation reversal button
Drilling on steel mm: Ø 22
Tapping: M14
Taper attachment: ...
Column drilling machine Fabr.ALZMETALL Type:AX3S Bj.1979
with 2 step motor speed control infinitely variable .
Dgmtnop
Spindle admission MK3
Drill hole in steel 30mm
Drilling stroke: 120mm
Clamping table: 400mmX400mm height adjustable
Motor stage 1: from 250-1125rpm
Motor stage 2 from 500-2250rpm
Motor speed:1425/2875rpm Motor power :1/1,3KW
Overall dimensions:LXBXH 400mmX600mmX1750mm
Weight.Approx.200kg.
Machine in good condition.
bore capacity in steel (diameter):23 mm
throat:330 mm
bore stroke:120 mm
turning speeds:180 - 1600 U/min
surface area:760 x 360 mm
workpiece height max.:750 mm
voltage:380 V
total power requirement:2 x 0,9 kW
Mey8l
weight of the machine ca.:0,7 t
dimensions of the machine ca.:1,10 x 1,15 x 2,10 m
taper MK:2 x MK 1
column diameter:2 x 130 mm
bore capacity in steel (diameter) 28,0 mm
threading 12 M
bore stroke 130 mm
throat 250 mm
table: 375 x 375 mm
morse taper 3 MK
B389k73s
turning speeds 75 - 3.200 U/min
total power requirement 1,1 / 1,5 kW
weight of the machine ca. 215 kg.
range L-W-H 450 x 600 x 2.020 mm
Description :
- 12 switchable speeds thanks to the powerful 2-stage motor
- Direction of rotation switch for clockwise and counterclockwise rotation for
thread cutting
- Solid work table (rotatable 360 ??°), swiveling from -...
bore capacity in steel (diameter): 16 mm
Izez7k9
throat: 275 mm
bore stroke: 160 mm
spindle turning speed - continuous: 150 - 2360 / 9 step U/min
spindle taper MT: 3
Distance spindle/table max.: max: 580 / min: 100 mm
feed: 0,10 - 0,16 - 0,25 - 0,40 mm/U
table clamping surface:: 300 x 400 mm
table adjustable: vertikal 360 mm
table swivable approx.: drehbar 360°
base plate surface area: 500 x 400 mm
total power requirement: 1,65 kW
weight of the machine ca.: 652 kg
dimension machine xH: 1,0 x 0,6...
Column drilling machine
Bt7h80fzth
Make Ixion
type BS 23 AV
MK 3
throat 260 mm
table size 500 x 360 mm
10 speeds from 120 - 2160 rpm.
automatic feed : 0,1 - 0,16 - 0,25 mm/per revolution
space requirement :
height 1800 mm
width 770 mm
depth 500 mm
COLUMN DRILL SERRMAC MOD. V 22 ( USED )
REVOLVING TABLE + VICE.
THREE-PHASE.
Bvwewvgfuu
EXCELLENT CONDITIONS - READY TO USE.
Continuous drilling capacity in St 60 25 mm
Drilling capacity normal 30 mm
Tapping capacity M 20
Spindle MK 3
Drilling depth 125 mm
throat depth 260 mm
distance spindle/table 90 to 840 mm
table surface 500 x 365 mm
column diameter 110 mm
total height 1.900 mm
Weight 280 kg
Motor power 0,8/1,5 kW
Pdat7
Description
Modern, precise production pillar drilling machine according to the proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and chip breaking control as stan...
bore capacity in steel (diameter):30 mm
throat:330 mm
bore stroke:135 mm
voltage:380 V
taper MK:3
Speed:90 - 2000 U/min.
feed:0,1 - 0,3 m/min
workpiece height max.:600 mm
surface area:450 x 350 mm
transmission ratio:2
distance spindle nose and table:30 - 600 mm
Y7mcslory
column diameter:200 mm
coolant:vorhanden
weight:0,8 t
total power requirement:1,1 kW
dimensions of the machine ca.:0,70 x 1,05 x 2,2 m
bore capacity in steel (diameter) 23,0 mm
throat 250 mm
bore stroke 95,0 mm
turning speeds 400 - 5.000 U/min
table-size 370 x 340 mm
column diameter 90 mm
engine output 0,64 kW
spindle taper MT 2 MK
Nwz2n
weight - pallet system 120 kg
range L-W-H 0,5 x 0,76 x 1,68 m
Furnishing:
- Pole changing motor
- V-belt drilling machine
- manual spindle feed
- Height-adjustable support table
bore capacity in steel (diameter): 20 mm
throat: 200 mm
bore stroke: 100 mm
spindle taper MT: 2
column diameter: 80 mm
revolution per minute: 500-800-1250-2000 U/min
Bnssz3y8
drill table: 340x280 mm
table rotating: 360 °
table adjustment: 650 mm
total power requirement: 0,4 kW
machine weight approx.: 186 kg
space requirement of the machine approx.: 0,8,x0,5x1,8 m
Tiltable (+/- 45°), Rotatable (360°) work table
Work table size: 340 x 360 mm
Rev: 35 - 5600 1/min
Spindle movement: 105 mm
Max drilling diameter in steel: 28 mm
Ht7djyops
Voltage: 400 V
Electric power: 1,5 kW
Overall dimensions: 750 x 500 x 1800 mm
Table - Spindle distance: 860 mm
Spindle - Base distance: 1275 mm
Column drill SERRMAC V 22 E
New " CE "
Electronic speed variator supplied
Turntable + vice mm 350 X 250
Drilling capacity on steel R50 mm ø 22
Tapping capacity on steel R50 mm M 14
CM2 spindle cone
Spindle stroke mm 90
Spindle sleeve diameter mm 52
Column diameter mm 98
Spindle centre column distance mm 201
PU transmission - Electronic variator (E)
Biguro3tye
Spindle speed rpm 270 ÷ 4.200
Motor power kW 0.75 / 220 V Single-phase
Dimensions (h x w x d) mm 1650x850x500
Weight Kg 170
Column drill,
...
Drilling performance: steel 60, 22 mm / M18
Adjustment drilling head & table each 300 mm
Speed (stepless) 37-3600 RPM
Spindle diameter 65 mm
Overhang 300 mm
Table surface 800x390 mm
Spindle feed 0.02-0.04-0.1-0.12-0.25-0.6 mm/U
Taper in spindle ACIERA attachment bracket
Stroke quill 120 mm
Dimension (WxDxH) 80x105x175 cm
Weight 900 kg
Accessories:
1 pc. drill chuck 1-13 mm
Bpbcmr7okf
1 pc. adapter sleeve SK30/MT1
1 pc. adapter sleeve SK30/MT2
1 pc. manual in German
Column drilling machine
Manufacturer unknown
Fw2phxn
1,0 KW
700/1400 rpm
right-left rotation
quick-action drill chuck MK 3
dimensions 740x740x1850 mm
Weight approx. 200 kg
bore capacity in steel (diameter) 25,0 mm
bore spindles - Morse Taper MK 3
table: 500 x 400 mm
turning speeds 105 - 2.900 U/min
quill stroke 135 mm
feed: 0,10 - 0,15 - 0,30 mm
total power requirement 0,65 - 0,9 kW
weight 200 kg
Nln99
Furnishing:
- the drill head is 360 ° around the column
swiveling and adjustable in height
- gear drill
- Thread cutter holder with inserts
Column drilling machine Alzmetall AX 3 SV 02-04-044
Delivery time: immediately
Number: 02-04-044
Machine data
Year of construction: approx. 1994
L x W x H: approx. 800 x 400 x 1800 mm
Weight: approx. 300 kg
Very good general condition
Technical specifications
Max. Drilling diameter in steel: approx. Ø 28 mm
Max. Drilling diameter in cast: approx. Ø 35 mm
Tool holder: MK 3
Bw9wkdsq
Speed range: approx. 80 - 1125 rpm
Projection: approx. 290 mm
Column diameter: approx. Ø 110 mm
Quill strok...
Tiltable (+/- 45°), Rotatable (360°) work table
Work table size: 340 x 360 mm
Rev: 35 - 5600 1/min
Spindle movement: 105 mm
Max drilling diameter in steel: 28 mm
Voltage: 400 V
Electric power: 1,5 kW
Overall dimensions: 750 x 500 x 1800 mm
Gs93par9
Table - Spindle distance: 860 mm
Spindle - Base distance: 1275 mm
OPTIdrill D 26PRO - column drilling machine
Bench and column drilling machine with belt drive
Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton
400 Volt models with right/left rotation
Drilling depth stop
Precision machined table with diagonal T-slots
Height adjustment of the drilling table with rack and pinion
Drill table ± 45 ° tilt and 360 °
V-belt cover with safety switch
Aluminium die-cast tailstock lever from one piece with Softgrip-hand...
Motor pole-changing S6
0.7kW/670U/min./400V.
1.3/kW1400U/min./400V.
Speeds - Stepless 200 - 3600 rpm.
Drilling capacity St60 - 25mm
Spindle mounting MK2.
Spindle stroke - 80mm.
Column diameter - 90mm.
Throat - 210mm.
Npodgpnv
Table size 300 x 420 mm.
Weight - 220kg.
Duration / ALB ear power 25/30 mm
Thread cutting capacity Max M20
Spindle MK III
Drilling depth 125 mm
Throat depth 260 mm
Column diameter 110 mm
Usable surface [BxL] 420 x 340 mm
Speed display scale
Drilling depth indicator scale
Drilling depth stop with fine adjustment
Nclxh
Table height with rack and pinion
Motor three-phase 400 V pole changing bar 0.90/1.45 kW
Spindle speed with idle,
continuous 125-4000 1 / min
in 2 levels I: 125-2000 1 / min
II: 250-4000 1 / min
The levels change via belt ...
OFFER 21137
Technical data:
- Drilling capacity in steel ST 60 28 mm
- Drilling capacity in steel ST 60 32 mm
- Drilling spindle mounting MK 3-long spindle
- Drilling spindle stroke 180 mm
- Drilling spindle speeds infinitely variable
- Stage 1 65 - 240 rpm
- 240 - 875 rpm
- Stage 2 130 - 480 rpm
- 480 - 1750 rpm
Gb0po0yoc
- throat 290 mm
- max. distance table - drilling spindle 620 mm
- table with 2 T-slots 520 x 400 mm
- Height adjustable via toothed rack with hand cran...
Drilling capacity in steel 25 mm
Gpt7yqhxk
Drilling capacity in cast iron 32 mm
Tapping capacity steel M 20
Tapping capacity cast iron M 24
Morse taper in spindle MK 3
Drilling spindle stroke 140 mm
headstock adjustment 225 mm
spindle throat 280 mm
distance spindle-table 630 mm
distance spindle-base plate 1120 mm
working surface table 355 x 450 mm
Number of T-slots 3
width of T-slots 14 mm
distance 125 mm
Number of spindle speeds 8
Speed range 180 - 2000 rpm
Number of feeds 4
Feed range normal 0...
Drilling capacity in steel: 25 mm
Spindle speed: 80 - 1600 rpm infinitely variable speed over
Z8qotefn
Table size: 400 x 320 mm
Tool taper: Morse Taper 3
Quill stroke 110 mm
Column diameter: 100 mm
T-slot size: 14 mm
Projection: 230 mm
Distance spindle nose-mount: 1180 mm
Weight: 250 kg
Dimensions: 820 x 530 x 1715 mm
Accessories: tapping device, operating light, digital speed display.
Description:
Bench and column drilling machine with belt drive
Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton
400 Volt models with right/left rotation
Drilling depth stop
Precision machined table with diagonal T-slots
Height adjustment of the drilling table with rack and pinion
Drill table ± 45 ° tilt and 360 °
V-belt cover with safety switch
Aluminium die-cast tailstock lever from one piece with Softgrip-handles
Industrial motor
...
YOURM COLUMN DRILL
TYPE 25 Professional
- MK3
- 160/3000 rpm
- Table 355 x 355 mm
- Table is rotatable
- Emergency stop
- Protective cover
Brn03cfcyy
- Lighting
- Documentations
- 230V
CALL FOR MORE INFO
DUTCHMACH
Metalworking machines
ENSCHEDE
- Infinitely variable speed control
- Quick adjustable drilling depth stop
- Thread cutting device
- Undervoltage release
- Table height adjustment via toothed rack
- LED illumination in head
- Continuous/normal drilling capacity R1: 23/25 mm
- Tapping capacity (depending on pitch) R1:
max. M 16x1
- Spindle MK II
- Drilling depth 100 mm
- throat depth 260 mm
- column diameter 110 mm
- Usable table area (W x L) 420 x 340 mm
- T-slot size (arm): number 2, distance 125 mm
- Speed display Digital
...
Table and pillar drilling machines
Drilling capacity 20 mm
Tapping capacity (max.) M 16
Quill stroke 135 mm
modern design, good casting quality and clean workmanship combine stability and function with an attractive appearance
precisely ground and heavy work table with diagonally running T-slots
particularly smooth height adjustment of the drilling table, even under load
large-dimensioned base plate with ground clamping surface and parallel T-slots
with right-left running as well as with automat...
Column boring machine Fabr.BIMAK Typ:25 Bj.1986
Drilling power in steel: 25mm
Spindle intake: MK3
Spindle speeds: 135-1900U/min engine KW 0.75
Pino-dub: 110mm
With 3 levels of combined
Tense-up table: 300mmX300mm rotary bar and swivel bar
Screw back-to-width 95mm wingspan 85mm Verstell etc swivel bar
Prism up to 30mm swivel.
Vsqkdi
With fast drilling feed, exit wedge, NOT-AUS mushroom pressure button, lamp,
Machines Spindel LRuns Very Quiet.
Dimensions: Length 830mm width 580mm height 1710mm...
Main drive motor [kW] 1.5/400V/980rpm.
Maximum bore diameter in steel [mm] 25
Maximum bore diameter in cast iron 200 HB [mm] 30
Morse taper in spindle 3
Hole extension (maximum drilling depth) [mm] 140
Number of spindle speed ranges 9
Spindeldrehzahlbereich [U/min] 160,230,270,300,441,410,825,942,1342
Hydraulic feed of the spindle (stepless)
Table size [mm] 420
Column diameter [mm] 110
Bq2ftrhdiv
Distance of spindle axis from column [mm] 320
Net weight [kg] 300
Dauerbohrleistung e 335: 25 mm
Standard ALB ear performance: 30 mm
Thread cutting performance: M 20
Spindle: MK 3
Drilling depth: 125 mm
Throat depth: 260 mm
Table size: 500 x 365 mm
Column diameter: 110 mm
Engine: 0.8 / 1.5 kW
Weight: 250 kg
Accessories:
Milling package, consisting of:
Ebevkbb
* Fine feed
* Quill clamp
* Suit rack
* Cross table MF-3
* Cutter spindle MK 3
* 3 collets: 8 / 10 / 12 mm
For sale is a used gear drilling machine
Make / Type STANKO 2H118
Machines No. 424600
Year of manufacture 1975
Drill Ø 22 mm in ST 37
Projection 200 mm
Table width 400 mm
Table length 350 mm
Sleeve travel maximum 250 mm
Speeds maximum 2800 rpm
Minimum speed 180 rpm
Maximum power 1,5 kW
TischᐸᐳSpindel max. distance 600 mm
maximum feed rate 0.5 mm/rev.
smallest feed 0,1 mm/rev.
Cmkn7dnd
Tool holder MK2
Weight 350 kg
Space requirement L * W * H 500 mm * 800 mm * 2000 mm
