Twist drill 7 pieces

Divers Zweischneidig Ø 29 - 48 mm

Condition: used, Year of construction: 2014, total length: 4,100 mm, Tugger Gedpsxd Ey Usfx Aadein Volk DFZ 120H Drive Diesel Year built 2014

Condition: new, functionality: fully functional, turning diameter over cross slide: 330 mm, spindle bore: 78 mm, turning diameter over bed slide: 520 mm, center height: 260 mm, turning length: 1,000 mm, quill stroke: 127 mm, quill diameter: 68 mm, total length: 2,160 mm, total width: 810 mm, spindle speed (max.): 2,000 rpm, spindle speed (min.): 20 rpm, bed width: 300 mm, overall weight: 1,810 kg, quill mount: MK 4, Equipment: rotational speed infinitely variable, Tip height: 260 mm Center distance: 1000 mm Spindle bore: 78 mm Gedpfsh Rvxhjx Aadein Spindle nose according to DIN 55029 Camlock D8 Spindle speed range: 20-2000 rpm Drive power: 7.5 kW Features include infinitely variable speed control Hardened and precision-ground Z-axis guideways Turcite coatings (on mating surface) of the tool and cross slides Manual central lubrication with one pump for longitudinal and cross slides Complete coolant system with rear splash guard and splash guard on the slide Chuck guard Switch rod with 3 adjustable cams Machine light Fixed center point Set of machine mounting plates

Condition: used, Year of construction: 1981, Distance between centers: 1300 mm Copy length: 1250 mm Machine center height: 250 mm Center height above support: 160 mm Slide feed speed: 3 m/min Weight: 630 kg Speeds: 500-1000-1500-3000-2100-4200 rpm Hydraulic Gedpfx Ajvvkt Ioadein Storage location: Nattheim

Condition: reconditioned (used), reinforced gray cast iron table, tiltable balanced cast iron wheels precise upper & lower blade guide Work table dimensions approx. 680 x 580 mm Giedev Dg A Uspfx Aadsn Cast iron wheel diameter 600 mm Max. cutting height 340 mm Max. cutting width approx. 540 mm Three-phase motor approx. 2.2 kW, 50 Hz, 400 V

Condition: used, Year of construction: 1980, TUBE BENDING MACHINE Gjdpfxjrq D N Rs Aadoin LANG TYPE EL90 Φ 90

Condition: used, Year of construction: 2015, machine/vehicle number: A2536805, pressure:40 t stroke:250 mm return capacity:6,3 t motor:5,5 kw Max Working height:450 mm :90 mm/sec. :10 mm/sec. spindle stroke:250 mm pestle plate:500 x 200 mm table plate:600 x 650 mit T-Nuten mm Table cut-out:200 x 170 mm Gsdefxyhfopfx Aadsin table height:850 mm :200 l

Condition: new, Pizza oven with two floors, hood, and fermentation chamber GMG The baking chamber is completely made of refractory stone Temperature range: 50 to 400°C The front side made from stainless steel Digital control Upper and lower heat are separately adjustable Digital monitoring for upper and lower heat settings Digital error code system Heavy-duty temperature-resistant door with tension spring Double-glazing door glass for strengthened insulation and air circulation External dimensions: 149x110x194cm Giodpfsuu H Alox Aadsn Internal dimensions: 105x70x15cm Electric power: 2 x 8 kW - 3NAC I 400 V Fermentation chamber: 149 x 93 x 90 cm - 3kW and 230 V Weight: 500 kg

Condition: new, functionality: fully functional, power: 18.39 kW (25.00 HP), color: red, overall weight: 4,500 kg, empty load weight: 3,000 kg, maximum load weight: 1,500 kg, Year of construction: 2025, FARMER 815T The modern telescopic loader FARMER 815T – professional and robust. The FARMER 815T model is the ideal machine for agricultural operations, construction companies, electricians, installers, renovation firms, and service providers in similar sectors. We also guarantee customer support even after the warranty period has expired. The loaders are manufactured under supervision of European technicians and based on European technology. The machine is built on a stable chassis and can perform reliably under all conditions. The comfortable, glazed cab ensures safe and pleasant working conditions. TECHNICAL DATA: Model: FARMER 815T Total weight: 3000 kg Overall dimensions (L×W×H): 4100×1520×2450 mm Rated bucket capacity: 0.25 m³ Maximum lifting capacity: 1500 kg Dump height: 2200–3000 mm Lifting height: 3450 mm Discharge height (maximum reach when dumping): 700 mm Wheelbase: 2100 mm Track width: 1405 mm Rear chassis articulation angle: 8° Maximum steering angle: 31° Total cycle time: 11 s ENGINE: Model: YUNNEI Power: 25 HP Type: Direct injection, horizontal, water-cooled, 4-stroke, 3-cylinder Rated output: 18.8 kW Rated speed: 2400 rpm Minimum fuel consumption: ≤1800 g/kW·h HYDRAULIC SYSTEM: Working pressure: 18 MPa Boom lifting time: 4 s Total boom lift/lower time: 7 s Fuel tank capacity: 55 l Hydraulic tank capacity: 65 l Automatic leveling: YES DRIVE SYSTEM: Standard: Fully hydraulic Transmission type: Fixed-axle, constant mesh gearbox Gear range: 2 forward gears / 2 reverse gears Maximum speed: 22 km/h BRAKE SYSTEM: Service brake: Foot-operated, drum brake (mechanical) Parking brake: Hand-operated, disc brake (mechanical) Giedpoxp Ibxsfx Aaden TYRES: Standard tyres: 31×15.5-15 Optional tyres: 19.0/45-17/MP Tyre pressure front: 320 kPa Tyre pressure rear: 320 kPa PRICE: €21,700 net €25,823 gross KINGWAY DEUTSCHLAND is the exclusive point-of-sale distributor for the Kingway brand in Germany. Here, you can inspect and test all machines on site. We are the largest importer of construction and agricultural machinery in Europe and the Kingway headquarters in Germany. We have a huge selection in stock, with around 100 machines available at any time. We deliver machines throughout Germany, Austria, Switzerland, Italy, and other neighboring countries, and we offer our customers access to all spare parts and mobile service. KINGWAY DEUTSCHLAND Jakub Dylus 84098 Hohenthann Gambacherstr. 4 STOCK: Untergambach 10 84098 Hohenthann

Condition: used, Year of construction: 2002, turning diameter 820 mm turning length 2.000 mm control SIN 810 D center height over square guideway 400 mm turning diameter over slide rest 500 mm x-travel 540 mm z-travel 2.100 mm feed x/z-axis 0,01 - 50 mm/min rapid traverse X-axis 5,00 m/min rapid traverse Z-axis 10,00 m/min feeding force facing 12.500 N power feed longitudinal 20.000 N spindle turning speed range 6,4 - 1.600 U/min spindle turning speed - gearbox stage 1 6,40 - 376 1/min. spindle turning speed - gearbox stage 2 27,40 - 1.600 1/min. power capacity at 60% / 100 % load 46,00 / 37,00 KW max. torque at 60% / 100% load 5.073 / 4.069 Nm constant cutting rate 1 - 9.999 m/min. spindle head DIN 55027 - Size 11 spindle diameter in front bearing 170 mm spindle bore 128 mm tailstock quill taper MT 6 diameter of quill 125 mm quill stroke 280 mm Giedpfx Aow Dvipsadon thread pitch 0,1 - 400 mm total power requirement 35,00 kW weight of the machine ca. 11,00 t dimensions of the machine ca. 6,00 x 3,00 x H2,60 m SIEMENS Sinumerik 810D mcontrol, chip-conveyor, tail stock, dust exhauster, 2 pc. steady rest. Machine can be inspected under power.

Year of construction: 2013, condition: ready for operation (used), Turning length: 6000mm, orbital diameter over bed/support: 820mm/515mm, spindle bore: 128mm, speed: 1600rpm, spindle power: 46kW, center height: 400mm, bed width: 560mm, quill diameter: 125mm, quill stroke: 280mm, connected load: 62kW. Machine dimensions X/Y/Z: approx. 6500mm/2500mm/2300mm, control: Heidenhain, operating hours: approx. 9000h. Including accessories such as a steady rest. Documentation available. On-site inspection is possible. Gisdpfjvwcwuex Aadsn