Used Bio-Gas for sale (3,427)

Condition: used, Roasting pan Lhsdpfoz N Amusx Ah Ssn 100 liters Electrically tilting Gas-powered

Condition: used, This listing is for a Varian Saturn 2100T GC/MS ion trap with turbomolecular pump comes complete with Varian CP-8200 Autosampler Varian 3900 GC-gas chromatograph, includes Software/PC/Printer Lhedexzh A Tepfx Ah Son Equipment can be serviced/renovated/refurbished on request at extra cost.

Condition: used, functionality: fully functional, Year of construction: 2000, operating hours: 5,004 h, load capacity: 1,800 kg, lifting height: 3,350 mm, fuel type: gas, mast type: duplex, construction height: 2,150 mm, empty load weight: 2,790 kg, drive type: Treibgas, Gas-powered forklift Mast type: Duplex Condition: Ready for use and fully functional Technical condition: good Front tire type: Solid rubber Ledpfx Aoz Sic Aoh Sehn Front tire condition: 40 - 60% Rear tire type: Solid rubber Rear tire condition: 60 - 80% Description: Front forklift - gas-powered forklift OM G18 - - - 5004 operating hours according to the display - - Year of manufacture 2000 - - 1.8 ton lifting capacity - - 3.35m lifting height - - 2.15m overall height - - Side shifter - - Duplex free-lift mast - - 3-cylinder OM-Fiat engine - - Solid rubber tires, front approx. 50%, rear approx. 70% - - - Power steering - - - New service performed - - - Very maneuverable forklift - - - Good condition Side shifter, 3rd valve, front work light, overhead guard.

Condition: excellent (used), Coat & Fry fryer was previously being used on a crisp pellet and producing 400kg per hour. upgraded electrics. Lhodpfeymr Tbex Ah Ssn

Condition: used, Year of construction: 2021, functionality: fully functional, Dürr Ecopure VAR 2206 Thermal Oxidizer with Flue Gas Cleaning (2021) For burning liquid and gaseous waste streams including fluorinated gases, e.g. PFAS, and recovery of aqueous hydrogen fluoride Emissions limits SO2 ≤ 100 mg/Nm³ NOX ≤ 30 mg/Nm³ CO ≤ 50 mg/Nm³ CF4 ≤ 70 mg/Nm³ HF ≤ 1 mg/Nm³ NH3 ≤ 2 mg/Nm³ Comprising Direct fired thermal oxidizer Hot gas cooling and acid recovery Alkaline wet scrubber Honeycomb selective catalytic reduction deNOx system >1M cost spare parts Direct fired thermal oxidizer Including 2x natural gas combustion chambers and burners - High calorific liquid waste requires safe ignition supplemental hydrogen supply for acid formation - Gaseous waste streams injected via nozzles downstream and close to the burner - 1.5MW multi-fuel natural gas & liquid waste (minor fuel stream) burner with natural gas capacity up to 200Nm3/h - 1400C normal, 1540C max allowable temperature destruction of pollutants to reduce emissions with 3.28 MW thermal energy transfer - 2 seconds minimum residence time in combustion chamber at 1400C - 1,800mm combustion chamber internal dia. - Approx 300mm refractory lining - 2,400mm combustion chamber external dia. - 12,000mm combustion chamber internal length - 3.28MW maximum thermal capacity - 4,900Nm3/h, 60mbar, 14kW combustion air fans One chamber is active, the other one is on standby and can be prepared, repaired, or maintained. This allows minimizing shutdown and changeover time to only several days Wet scrubber hot gas cooling and acid recovery SGL Carbon Diabon HT-PQ 850 graphite pipe quencher - 6,000 Nm3/h capacity flow - 1,100 mm dia. - 2,000mm high - pumps SGL Carbon Diabon THX-RS falling film absorber shell & tube heat exchanger - 1,100mm dia. - 4,500mm tube length - 595 no. tubes - 22mm tube internal dia. - Graphite, carbon steel - pumps Quench vessel - PP/FRP Ledpez Ai Tpefx Ah Sehn - 1,100mm dia. - Approx. 6,000mm high 2x Scrubber absorber columns, each - Shell FRP/PP - Internals PP - 1,000mm dia. - 11,000mm high - Pumps - Dosing station FRP 5m3 Emergency water tank - 1,600mm dia. - 3,000mm high - 3kW heating 2x Teblick 100,000L HDPE hydrofluoric acid tanks (2019) Honeycomb selective catalytic reduction deNOx system - 5,900Nm3/h, 130mbar, 42kW induced draft fan - 320 kW gas/gas heat exchanger - 500 kW capacity reheat burner - 1.2m deNOx honeycomb catalyst Clean gas outflow Stack with flow & temperature measurement Spare parts include - 200 items of sensors, pumps, valves, gaskets, joints etc. - Graphite quencher - Falling film absorber With the redesign and maintenance support of Dürr, the system could also - be adapted to other halogenated gases with bricks to be selected according to gas application - cope with the presence of VOCs or contaminated air - larger volumes with the addition of a small lance for 15kg/h liquid injection

Condition: new, - Dimensions: 910 x 860 x 550 mm - Internal dimensions: 610 x 610 x 170 mm - Weight: 51 kg - Power: 8 kW - Power supply: Natural gas + 230V~ electrical connection - Capacity: 4 pizzas with a 30 cm diameter - Professional oven, ideal for pizzerias with high demand - Designed to offer efficiency, safety, and stability - Fast heat-up thanks to its specially designed chamber - Stable temperature even with heavy use (frequent opening and closing) Lhsdpfxjy S R Ips Ah Ssn - High-precision safety thermostat for reliable adjustment - Bakery-style door for easy loading and unloading - Natural gas consumption: 0.844 m³/h - Thermal power: 6880 kcal/h

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 4,724 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 2,400 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,600 mm, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,450 mm, total length: 2,300 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜🔧 💼 Years of experience | In-house service & paint shop | Expert consultation | Pan-European transport | After-sales support Looking for a forklift you can rely on? 🤝 We are a reputable European dealer of new and used forklifts. From small businesses to international facilities – our machines ensure dependable and efficient logistics. ⚙️ 🌟 Why Choose FT Logistics ✅ Every forklift undergoes comprehensive technical servicing – inspection, testing, oil & filter changes, major component overhauls ✅ UDT certification available upon request ✅ In-house workshop & paint shop – forklifts reconditioned both visually and mechanically ✅ Own transport fleet across Europe 🚛 ✅ Operator training & on-site functional testing upon delivery ✅ After-sales technical support – we’re here for you even after the purchase ✅ Machine viewing & testing available at our headquarters ✅ Financing assistance via top leasing partners ✅ Invoice in EUR or PLN 💶 🔩 AVAILABLE MODEL: COMBILIFT C4000 – Four-way / Multidirectional Forklift / Multidrive System Lsdpfez Sbvhjx Ah Sshn ✅ Year: 2002 ✅ Operating hours: 4,724 h ✅ Drive: GAS ⛽ ✅ Capacity: 4,000 kg ✅ Mast: Duplex – 4,500 mm ✅ Fork positioner: 1,380 mm | Forks: 1,200 mm ✅ Superelastic tyres – 100% ✅ Free lift: 2,400 mm ✅ Condition: Excellent – after major service ✅ Appearance: Clean, corrosion-free, ready for work 📏 Dimensions: Height: 2,450 mm | Length: 2,300 mm | Width: 2,250 mm | Positioner: 1,320 mm | Overall height: 3,600 mm 🚀 Ideal For: 🏭 Narrow aisle warehouses 🪵 Wood, steel & pipe sectors 📦 Handling long loads 🏗️ Indoor & outdoor operations FT Logistics – Quality you can count on. Service you can trust. 💙

Condition: excellent (used), functionality: fully functional, Year of construction: 2002, operating hours: 4,724 h, load capacity: 4,000 kg, lifting height: 5,500 mm, free lift: 2,400 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,600 mm, gearing type: hydrostat, fork carriage width: 1,380 mm, fork length: 1,200 mm, fork width: 150 mm, fork thickness: 50 mm, tire condition: 100 %, front tire type: cushion tires (black), front tire size: 200/50-10, rear tire type: cushion tires (black), rear tire size: 27X10-12, overall weight: 10,100 kg, empty load weight: 6,100 kg, total height: 2,450 mm, total length: 2,300 mm, total width: 2,250 mm, color: yellow, Equipment: CE marking, all wheel drive, cabin, lighting, pallet forks, sideshift, USED FORKLIFTS WITH QUALITY GUARANTEE – FT LOGISTICS 🚜🔧 💼 Years of experience | In-house service & paint shop | Expert consultation | Pan-European transport | After-sales support Lhjdpsz Ruzaofx Ah Sen Looking for a forklift you can rely on? 🤝 We are a reputable European dealer of new and used forklifts. From small businesses to international facilities – our machines ensure dependable and efficient logistics. ⚙️ 🌟 Why Choose FT Logistics ✅ Every forklift undergoes comprehensive technical servicing – inspection, testing, oil & filter changes, major component overhauls ✅ UDT certification available upon request ✅ In-house workshop & paint shop – forklifts reconditioned both visually and mechanically ✅ Own transport fleet across Europe 🚛 ✅ Operator training & on-site functional testing upon delivery ✅ After-sales technical support – we’re here for you even after the purchase ✅ Machine viewing & testing available at our headquarters ✅ Financing assistance via top leasing partners ✅ Invoice in EUR or PLN 💶 🔩 AVAILABLE MODEL: COMBILIFT C4000 – Four-way / Multidirectional Forklift / Multidrive System ✅ Year: 2002 ✅ Operating hours: 4,724 h ✅ Drive: GAS ⛽ ✅ Capacity: 4,000 kg ✅ Mast: Duplex – 4,500 mm ✅ Fork positioner: 1,380 mm | Forks: 1,200 mm ✅ Superelastic tyres – 100% ✅ Free lift: 2,400 mm ✅ Condition: Excellent – after major service ✅ Appearance: Clean, corrosion-free, ready for work 📏 Dimensions: Height: 2,450 mm | Length: 2,300 mm | Width: 2,250 mm | Positioner: 1,320 mm | Overall height: 3,600 mm 🚀 Ideal For: 🏭 Narrow aisle warehouses 🪵 Wood, steel & pipe sectors 📦 Handling long loads 🏗️ Indoor & outdoor operations FT Logistics – Quality you can count on. Service you can trust. 💙

Condition: used, Year of construction: 2020, operating hours: 15,400 h, load capacity: 3,500 kg, fuel type: diesel, Due to the large number of unreliable emails, we will not be responding to all emails. Lhsdpfx Ahjz Rrv Ij Son WhatsApp: 1 Still RX 70-35 gas forklift, spare parts donor, 17,100 hours, year of manufacture 2020 = €4,900 net. 1 Still RX 70-35 gas forklift, 16,100 hours, year of manufacture 2020 = €5,900 net. 1 Still RX70-35 diesel hybrid forklift, 15,400 hours, year of manufacture 2020 = €6,900 net. All forklifts are sold without refurbishment or inspection. "ERRORS, TYPOS, AND PRIOR SALE EXCLUDED"

Condition: used, Used hydrogen plant designed to produce high purity hydrogen and carbon monoxide from natural gas. Built by Air Liquide and first operated in 2015, shut down in August 2024. Output capacity as follows: - Hydrogen 60000 Nm3/hour with 99.99% purity. Lhjdpfxjy Ryrbs Ah Sen - Carbon monoxide 14500 Nm3/hour with approximately 99% purity. (Actual purity depends on volume of nitrogen in the natural gas feedstock.) - Superheated 40 bar steam by-product. The HyCO plant includes the following (5) main sections: - Syngas generation / steam reforming and steam generation - Gas cooling - CO2 removal unit / CO2 scrubbing - Gas drying and cryogenic dismantling - Pressure swing adsorption (PSA) Also included: sub-systems for provision of operating resources, flare system, process control and safety shutdown system.

Condition: used, Year of construction: 1999, operating hours: 7,835 h, load capacity: 3,000 kg, fuel type: gas, gearing type: automatic, Equipment: cabin, head guard, Forklift A 30 U Unladen weight: 4,100 kg Runs on LPG and petrol Very good condition Sideshift Trade-in + exchange possible Would you like to trade in your used vehicle or exchange it? We are happy to purchase your old vehicle at market price. Please send us the vehicle details by email or call us. Registration service: Ljdsulltwopfx Ah Sohn We are happy to assist you with the application for temporary license plates and export plates. Despite careful data collection and vehicle assessment, there may be discrepancies in equipment data, scope of delivery, and technical specifications. The information is provided to present the vehicle and is non-binding. Interim sale and errors expressly reserved. The description serves for general identification of the vehicle and does not constitute a warranty in terms of contract law. The description in the purchase agreement is decisive.

Condition: used, This listing is for a Varian 3900 GC With FID and 1041 Packed Injector The Varian 3900 gas chromatograph (GC) is designed to meet the demands of the analytical laboratory with its compact design—GC occupies less than half the workspace of the average gas chromatograph unit. Models 39001-00 and -05 feature an icon-based keypad which simplifies training and increases daily productivity. Select one of six pre-programmed languages for further ease-of-use. Password protection locks keypad from unauthorized access. Each Varian 3900 GC unit features a front access column compact oven with Precise Temperture Control which uses standard 7" (17.5 cm) diameter capillary columns. Maximum operating temperature is 450°C—accommodates any application. Plus, the oven cools down from 450°C to 50°C in only 5.2 minutes! Dimensions and Weight Size: 21.8 in./55 cm (h) x12.5 in./32 cm (w) x 22 in./56 cm (d) Weight: 59 lbs/26.8 kg Equipment can be serviced/renovated/refurbished on request at extra cost. Was previously used with a Perkin Elmer HS40XL Lhjdpfx Aoxzh A Heh Ssn

Condition: used, This listing is for the Hitech Instruments GIR250 Gas Analyser The unit is in full working condition and is ready for immediate use The GIR250 is a bench‑top / transportable analyser designed to measure oxygen (O₂) and carbon dioxide (CO₂) simultaneously in gas samples. It is made by Hitech Instruments (now part of the MTL / Eaton group). Its design emphasizes ease of use, reliability, and low maintenance cost. Other supporting features: The instrument can be programmed with pass/fail criteria for each gas (alarms). It provides analog outputs, typically 4–20 mA, for external logging or control systems. Calibration is designed to be simple (via the front panel keypad) to reduce training burden. The O₂ galvanic cell is user-replaceable (i.e. maintenance can be performed in the field). Mechanical, Electrical & Operational Details Lhodpfx Ahjxhdqto Sen The GIR250 is housed in a rugged, transportable case (lab-style) so it can be used as a benchtop or mobile analyser. Sample inlet and outlet connections use 0.25″ (~6 mm) tubing. The sample system should avoid condensation and contaminants; non‑condensing sample environment is required. Operating ambient temperature: –5 to +40 °C (for non‑condensing conditions) Power / interface: standard for bench‑top analysers (the catalogue doesn’t always detail it, but likely mains or DC supply, suitable for lab use) Typical Applications & Suitability Because it can measure both O₂ and CO₂ in a single unit, the GIR250 is used in applications such as: Respiration / breathing gas analysis / Douglas bag analysis (i.e. in physiological or experimental gas mixture measurement) Fermentation / bioprocess monitoring (where O₂ and CO₂ both matter) Gas mixture / inertisation / process gas quality (checking gas purity, calibrating mixtures) It is not primarily intended for measuring very low trace levels (ppm-level) of O₂ or CO₂ unless its ranges are suitably adapted or specified. The design is more for percent-range analysis

Condition: used, This listing is for the Magellan Tandem Gas Analyser The unit is in full working condition and is ready for immediate use Here’s a summary of the Magellan / H.E.L Tandem Gas Analyser (especially the Tandem PRO model), based on available specs and user info. If you want comparison with similar units, or more in‑depth performance data, I can also pull that together. The Tandem (Standard) and Tandem PRO gas analysers are instruments by Magellan Instruments / H.E.L designed primarily for monitoring O₂ (oxygen) and CO₂ (carbon dioxide) in gas streams. They are often used in biological / fermentation / bioreactor / cell culture / metabolic flux settings where gas composition is a key parameter Lhedpfx Ahsxhdufs Ssn

Condition: excellent (used), Year of construction: 1991, We can offer you CO2 carbon dioxide gas used storage tank vessel Volume 21050L; Working pressure 22 bar; Export from EU We also have other tanks for LIN, LOX, LAR, LNG and CO2, argon, oxygen, nitrogen and carbon dioxide, Hydrogen, Methane We would also be pleased to prepare an offer for you or provide you with further information. To discuss the possibilities, please contact us by phone or e-mail. Lodok Eac Djpfx Ah Sshn

Condition: good (used), functionality: fully functional, machine/vehicle number: K005A02146X, Year of construction: 2000, operating hours: 7,920 h, load capacity: 5,000 kg, lifting height: 4,600 mm, load center: 600 mm, fuel type: gas, mast type: duplex, construction height: 3,200 mm, fork length: 2,400 mm, overall weight: 7,880 kg, total height: 3,200 mm, total length: 6,000 mm, total width: 1,520 mm, Equipment: UVV, sideshift, Hyster H5.00XM LPG Forklift Year of manufacture: 2000 Operating hours: 7,920 h Lift height: 4,600 mm to top of forks Overall height: 3,200 mm Load capacity: 4,410 kg effective with fork positioner and sideshift Overall dimensions approx.: 1,520 mm wide; approx. 3,600 mm long without forks Fork length: 2,400 mm - Fork positioner adjustable from approx. 460 mm to 1,350 mm overall width - Bracket for 2 gas cylinders with changeover valve - Sideshift - Power steering The machine is in perfect working order and ready for immediate use. Affordable delivery by professional service provider possible. Have a look at our other ads as well. We always have a large selection of high and low lift trucks and forklifts in stock. Do you need spare parts for your forklift, pedestrian stacker, etc.? Just contact us. Lhedpsyi Eyaefx Ah Ssn Didn’t find the right unit? Simply send us an email with your requirements and we will check if we have the right machine for you.

Condition: used, Promeos Industrial Gas Furnace 850 °C For sale is a high-performance, gas-fired PROMEOS industrial chamber furnace, manufactured in 2018. The unit reaches a maximum furnace temperature of 850 °C and has a rated thermal output of 300 kW. According to the available technical data, operation is intended for natural gas types H, E, and L, as well as propane. The furnace features a lift-up door and is suitable for industrial heat treatment and production processes. Technical Data Manufacturer: Promeos Unit designation: BA 31010.0561.0000 Year of manufacture: 2018 Max. furnace temperature: 850 °C Rated thermal output: 300 kW Burner heads: 2 × (3 × 40-03 CEO) Fuel: Natural gas type H, E, and L / Propane Gas connection pressure: 100 mbar Propane consumption: approx. 11 m³/h Combustion air requirement: approx. 335 m³/h Exhaust gas mass flow: approx. 453 kg/h Air ratio: 1.35 ± 0.05 NOₓ at rated load: approx. 20 ppm CO at rated load: approx. 10 ppm Electrical connection: 400/230 V AC, 3L/N/PE Electrical connection power: 4 kW Protection class: IP54 Weight: approx. 4,700 kg Dimensions (W × D × H): approx. 3,000 × 3,000 × 3,400 mm (height including lift-up door) Internal/usable space dimensions (W × H × D): 1,500 × 950 × 1,500 mm Ledpfx Aez Ipuush Sshn Usable space volume: approx. 1.58 m³ Last known maintenance: 2021 "All from a single source: We would be happy to offer you suitable bank financing for your project." More items - new and used - can be found in our shop! International shipping costs upon request!

Condition: used, Used Siemens type CFR5 G6A single stage gas expansion turbine. System rated approximately 60,000 Nm3/hr gas feed, 55 bar inlet pressure at 145 deg.c. Includes Loher type JKXK-560MR-04A generator rated output of 3035kW at 1509 RPM with connected power load of 2.8MW. Additional information available upon request. Lhedsy Aaycepfx Ah Sen

Condition: used, This listing is for the ATi Portsens111 Gas Leak Detector The unit is in full working condition and is ready for immediate use The ATI PortaSens III is a portable, handheld gas leak detector designed for locating and measuring gas leaks across a wide range of environments—from chemical plants to pharmaceutical labs, food processing facilities, and confined spaces Key Features & Capabilities Interchangeable Smart Sensors Lhedpfxsxhfqbe Ah Son Attaches a variety of pre‑calibrated smart sensor modules, each combining sensor, amplifier, and memory into one. These allow detection of 30 to over 60 different gases, depending on configuration Swapping sensors takes under a minute and requires no user calibration Built-in Sampling Pump & Flexible Wand Enables pinpoint detection of leak sources via one‑hand operation Color Touch-Screen Display Features a backlit, graphic or touch-enabled LCD for easy reading in all lighting conditions Data Logging & Connectivity Includes a 4 GB internal data-logger, capturing millions of data points. Log intervals are programmable from 1 to 60 minutes, with USB connectivity for data transfer Power Options Runs on either rechargeable NiMH “D” cell battery or traditional alkaline D-cell batteries Alarms & Alerts Offers both visual and audible alarms—including low flow and low battery warnings—plus multiple gas concentration thresholds Supported Gases The D16 PortaSens III can detect a broad spectrum of gases, including but not limited to: Toxic gases: Hydrogen sulfide (H₂S), hydrogen peroxide (H₂O₂), formaldehyde, chlorine, sulfur dioxide, ammonia, and others Common industrial gases: Oxygen (O₂), ozone (O₃), carbon monoxide, carbon dioxide Specialty/exotic gases: Arsine (AsH₃), diborane, ethylene oxide, phosphine, silane, bromine, iodine, and more

Condition: used, PROMEOS Gas-Fired Chamber Furnace For sale is a gas-fired industrial furnace with a maximum furnace temperature of 750 °C and a specified rated thermal output of 40–80 kW in total. The system is designed for operation with natural gas or propane and features two burner heads of type ECO 03-40. The furnace is from the year 2016. The last known maintenance was performed in 2021. Equipment and Features Gas-fired industrial furnace system Maximum furnace temperature of 750 °C Two burner heads Operation with natural gas or propane according to technical specifications Electrical connection with 400/230 V Industrial design Lodpfez Ipcxjx Ah Sjhn Technical Data Manufacturer: PROMEOS System Designation: BA 31010.0484.0000 Year of Construction: 2016 Maximum Furnace Temperature: 750 °C Burner Heads: 2 × ECO 03-40 Rated Thermal Output: 4 × 10–20 kW Fuel: Natural gas type H, E, and L / Propane Gas Connection Pressure: 50 mbar Propane Consumption: approx. 3.9 m³/h Combustion Air Requirement: approx. 120 m³/h Exhaust Gas Mass Flow: approx. 165 kg/h Air Ratio: 1.35 ± 0.05 NOₓ Emissions at Rated Load: approx. 20 ppm CO Emissions at Rated Load: approx. 10 ppm Electrical Connection: 400/230 V AC, 3L/N/PE Electrical Connection Power: 4 kW Protection Class: IP54 Weight: approx. 4,700 kg Sound Pressure Level: ≤ 70 dB(A) Dimensions of the PROMEOS Chamber Furnace - Width: 2,800 mm - Depth: 2,700 mm - Height including lifting door: 3,400 mm “We offer a suitable bank financing option for your project – all from one source.” You can find more articles – new and used – in our shop! International shipping costs available upon request!

Condition: used, Applicable material: Hay Working width: 730 cm Lhedpfxo Aatkqj Ah Ssn

Condition: used, This listing is for the Restek Single Position Base Plate Gas Filter Kit + SGT Gas Filter Kit The unit is in full working condition and is ready for immediate use The Restek Single Position Base Plate Gas Filter Kit is a modular system designed for gas purification in laboratory applications, particularly in gas chromatography (GC) and mass spectrometry (MS) systems. Lhedexv Dk Nopfx Ah Sjn Key Features Baseplate Design: The single-position baseplate (catalogue number 22025) is constructed from brass and measures 10.2 × 10.2 × 4.8 cm. It is compatible with all standalone Super Clean gas filters Filter Cartridges: Restek offers various filter cartridges, such as the triple filter that removes oxygen, moisture, and hydrocarbon impurities, and the fuel gas filter designed for moisture and hydrocarbon removal. Fitting Compatibility: The baseplate accepts 1/8" tubing. To adapt to 1/4" tubing, 1/8" to 1/4" tube end reducers are available. Material Options: End fittings are available in brass or stainless steel, allowing for customization based on application requirements Restek SGT Superclean Gas Filter Kit The Restek SGT Superclean Gas Filter Kit is a high-purity gas purification system designed to remove contaminants such as moisture, oxygen, and hydrocarbons from carrier and fuel gases used in gas chromatography (GC) and mass spectrometry (MS). This kit is particularly beneficial for applications requiring ultra-pure gas supplies to ensure accurate and reliable analytical results. Key Features High-Purity Output: Delivers gas purity levels exceeding 99.9999%, depending on the incoming gas quality and flow rate. Versatile Compatibility: Compatible with various gas types, including inert carrier gases, air, hydrogen, and helium. Quick-Connect Design: Features a user-friendly quick-connect system for easy and leak-free filter cartridge changes. Durable Construction: Constructed with a glass interior to prevent diffusion and a polycarbonate exterior for safety. Visual Indicator: Each filter cartridge includes an easy-to-read color change indicator to signal when replacement is necessary.

Condition: good (used), JBT Proseal tray sealer in lovely condition. Just arrived today so photos show machine before cleaning. Has been used on a Christmas product packing sausagemeat stuffing and meatballs. Currently fitted with tooling for Linpac R2 trays. Fitted with optional ICE coder. Lodpfx Asv Hh E Ajh Sehn

Condition: used, This listing is for a Magellan Instruments Tandem Pro Gas Analyser. The unit is in full working condition and is ready for immediate release. The Magellan Instruments Tandem Pro Gas Analyzer is a self-contained O2 & CO2 gas analyzer. The PRO system comes with an internal gas pump and programmable display. It includes calibration functions, error reporting and dual 4-20mA outputs. An RS232 output is included for integration into control systems. Benefits: Greater understanding of your cells and processes Physiological state measurement on-line Scale-up and scale-down predictions Batch variation studies: feature analysis Metabolic flux analysis and mass-balance calculations Accurate fed-batch control Batch variation studies: anomaly analysis Metabolic activity based feeding Dedicated, continuous, standard signals for all your reactors Lodoxx Aqyopfx Ah Sjhn On-line information, allows real-time calculation of RQ, CER, OUR, growth rate, KLa, etc. 0-10V and 4-20mA, with RS232 on PRO & Multiplex Integrates to any reactor size (250ml – 100m3) Specifications: Feature CO2 O2 Measurement Principle: Infrared Absorption Electrochemical Range: 0-5%, 0-10%, 0-20% 0-30%, 0-50%, 0-100% Resolution: 0.01% 0.01% Accuracy: ±2% of full scale ±2% of full scale Drift:

Condition: used, This listing is for the ATi f12/D Gas transmitter The units are in full working condition and ready for immediate use ATi F12/D Gas Transmitter Overview The Series F12D Gas Transmitter is designed for detection of a variety of toxic gases in hazardous area applications. In addition, it is also well suited for general-purpose environments where toxic gas measurement is required. The F12D is highly customizable, making it adaptable to nearly every fixed-mount toxic gas monitoring application. Key Features Extensive Gas Detection Supports over 60 interchangeable electrochemical sensors for detecting gases such as chlorine, ammonia, hydrogen sulfide, formaldehyde, nitric oxide, phosgene, and more. Auto-Test Function An integrated Auto-Test system uses a real gas sample to verify sensor function—eliminating the need for manual bump tests and ensuring operational integrity. Smart Sensor Technology H10 Smart Sensors store their own calibration data and can be swapped out in the field without recalibration, reducing maintenance time and cost. Lodpfjxv Dnzsx Ah Sehn Rugged, Durable Design The F12D features a polycarbonate enclosure with stainless steel hardware, IP65 ingress protection, and is corrosion-resistant for harsh environments. Flexible Power Supply Options Operates on 12–24 VDC, 115 VAC, or 230 VAC to suit various site requirements. Communication Capabilities Offers RS-232/485 output and optional HART® or Modbus RTU for seamless integration into digital control systems. Highly Customizable for Diverse Applications The F12D offers broad configuration options, making it suitable for: Hazardous Areas (e.g., chemical plants, refineries) General Industrial Use (e.g., wastewater treatment, food & beverage, laboratories) Customization Options Include: Sensor Holder Styles Integral mount Remote mount (6 ft cable) Duct mount Auto-Test Gas Generators Available for chlorine, ammonia, hydrogen sulfide, sulfur dioxide, and others. Digital Interface Upgrades Optional HART and Modbus interfaces for advanced integration and data transmission