Used Wood Gas System for sale (40,430)

Condition: used, Filter system, extraction unit, clean-air extraction unit SCHUKO type STA + S 140 / 0 / S1 Extraction filter for wood chips, dust extraction, central extraction, bagging unit Fan type S 140 / 0 / S1 Serial no. Year of manufacture 12 / 2004 Nominal air flow 1,451 m³/h Negative pressure 1,398 Pa Filter area 18 m² Extraction connection Ø 140 mm, reduced to Ø 120 mm Air outlet 480 x 480 mm Motor power 1.1 kW Power supply 400 Volt, 50 Hz - Equipped with 24 filter bags (Ø 160 mm, length 1,500 mm) - Mechanical filter cleaning via vibratory motor - 2 discharge pipes at the bottom for dust collection bags, each Ø 500 mm reduced to Ø 300 mm - Dry extinguishing line with C-hose connection, fire department connection in case of filter fire - Differential pressure switch for filter contamination detection - Without control system (no control system present) Bjdpfsr R Ewlsx Aaaewk - Mounted on 4 steel pipe legs (square tube 40x40 mm) Overall height as shown in pictures: 3,050 mm Space requirement L x W: 1,850 x 1,000 mm Weight approx. 400 kg Very good condition Ideal for wood dust, wood chips, plastic dust or plastic chips.

Condition: good (used), Year of construction: 2013, Heating system for fuel wood (wood chips or logs), capable of generating steam up to 150°C, also suitable for hot water applications. Hydraulic feed allows for use of larger fuel materials. Heating capacity up to 850 kW. Location: Austria. Bjdpfxjyhlrme Aaaewk

Condition: used, Year of construction: 2008, Wood chip heating system with 100 kW heating output. Feed screw (as seen from the front) on the left. Ash container on the right. With discharge system for a room diameter of 6 m. Already dismantled. Becoming available due to connection to district heating. Loading onto truck included. Bjdpfx Aaeyalbleaowk

Condition: used, Four Mondial Forni deck ovens, 12 doors, wood/gas/oil-fired without automatic loader - Model: 43M - Year: 2011 - Dimensions (W x D x H): 2520 x 3750 x 2300 mm - Useful heights (cm): 19-19-19-25 - Baking surface (m²): 18.2 - Number of decks: 3 - Doors per deck: 4 Dkedcu Teyg H N Rji Enjh Bjdpfeyg H N Rox Aaaowk - Heating power (kW): 163 - Electrical power (kW–400V): 1.5 - Supplied with gas burner - Refurbished equipment: The ovens are prepared to order. Lead times for processing and delivery are set upon order (please request a price after revision) - Model: 43M - Year of Manufacture: 2011 - Dimensions (W x D x H): 2520 x 3750 x 2300 mm - Useful heights: 19-19-19-25 cm - Baking surface: 18.2 m² - Number of decks: 3 - Doors per deck: 4 - Heating power: 163 kW - Electrical power (kW–400V): 1.5 kW - Supplied with gas burner These Mondial industrial ovens are designed to meet the specific needs of professional bakeries. Benefit from a robust and reliable solution for your bakehouse with these efficient and high-performance ovens. Why Invest in a Bakery Loader? A bakery loader significantly improves productivity by reducing the time and effort required to load and unload your products. By placing your dough on the loader belt, the lift brings the items to the baking chamber quickly. This equipment is essential for professionals who want to benefit from the latest bakery innovations. Order Now! Don’t miss the opportunity to acquire an oven at the best price on the market. Purchase our bakery ovens and second-hand bakery deck ovens to boost your productivity. Contact us for more information and place your order today!

Condition: new, JLT Clamp Rack Systems For Solid Wood Edge & Face Laminating Bsdpfxjb Evnke Aaaewk A rugged and versatile clamping system specifically designed for solid wood edge and face laminating of both hard woods and softwoods. Available in two standard sizes, the Clamp Rack (or Panel Clamp) is ideal for the production of components such as panels, joinery sections, stair components,worktops, block gluings, and table tops etc. Frames can also be clamped. The patented equalizer clamp arms incorporate a number of important features not found on other types of mechanical clamp that help ensure a quality glue joint is produced. They can be positioned anywhere on the frame being easily moved from side to side / row to row. When not in use they can be hung vertically from a top support bar thus saving valuable workshop space. For face laminating material up to 150mm (6") in thickness optional rocker plates can be supplied which easily slide over the top and bottom clamp jaws thus evenly distributing the clamping pressure. When using the 401 type clamp and rocker plates material up to 200mm (8") can be laminated. Standard max. opening of the clamp arm is 1020mm (40") although larger sizes are available on request

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, (Please tell us your offer price) Sale only within Europe, incl. Turkey Price without packaging; delivery condition: FCA (machine location) ===== Technical data see handout. All warranty rights are excluded. For the correctness of the technical data and year of construction, for the completeness of accessories and tool equipment, and for compliance with all safety and environmental protection requirements specified in the accident prevention regulations. No sale to private individuals. Sales only within Europe, incl. Turkey Price without packaging; Delivery condition: FCA (machine location) Bwjdpfowyddgsx Aaask ===== Technical data please see handout in attachment. German text leading language. Without any guaranty and warranty, including completeness of tools & accessories as well as environmental and safety regulations. No private sales.

Condition: good (used), wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -Manufacturer: LEUCO quick clamping system with wood cutter -Hole: Ø 35 x 75 mm Bwjdpfx Asvx Rt Hoaask -Saw blade: Leuco 250x4.0/2.8x100Z48 202062 -Number: 2x recordings available -Price: per piece -Total dimensions: Ø 250 x 90 mm -Weight: 12.5 kg/piece

Condition: used, Wood milling cutter, milling head, milling tool, wood milling cutter, profile milling cutter -with: LEUCO quick release system -Outer: Ø 192 mm -Height: 55 mm Bwedpjciv Sxefx Aaajk -Number: 4x recordings available -Price: per piece -Weight: 9.4 kg

Year of construction: 2016, condition: excellent (used), Horiba Here we offer a Horiba exhaust system Mexa 7100D. Including JAG-10-000-061 cylinder trolley approx 1200 x 1064 x 802 mm and OVN-724A Stationary exhaust gas measurement before/after exhaust gas aftertreatment, Evaluation of exhaust gas aftertreatment systems Modal analysis (dynamic or transient analysis) during transient operating processes Analyzer for CO/CO2 (HC, NO, N2o, SO2), O2, THC 200 operating hours Weight 620 Kg Year of manufacture 2016 Bwedpfx Ajgkglxsaaok Type: Mexa 7100D Condition: used / used Pick up from location Scope of delivery: (See picture) (Changes and errors in the technical data, data are reserved!) Further questions we can answer on the phone for you.

Condition: used, -12 loading mouths/openings -4 decks -Integrated loader elevator Bedpex Up Nwjfx Aaaswk -Operates on wood and gas -Sold with gas burner -With mechanical control -Voltage: 400V

Condition: not inspected (used), Year of construction: 2015, functionality: fully functional, type of input current: AC, input voltage: 230 V, We offer this reconditioned Schwank supraSchwank 15 / 2 gas heating system, year of manufacture 2015. Bjdpfx Ajygbbzjaaowk

Condition: good (used), Year of construction: 2009, functionality: unexamined, machine/vehicle number: 096106384, input voltage: 230 V, overall weight: 451 kg, input frequency: 50 Hz, Edwards Helios-E Gas Abatement system in Excellent Condition! Bwodpov Diqnofx Aaaek Description: system for Effective exhaust management of CVD processes for semiconductor processing. Manufacturer: Edwards Model: Helios-E Sr.no. 096106384 Manufactured 2009 Power: 1Ph, 230V, 50 Hz. Weight: 451 kg With documentation

Condition: used, functionality: unexamined, machine/vehicle number: System 16, Used MDA Scientific System 16 Toxic Gas Monitor Manufacturer: MDA Scientific Inc. Model: System 16 Bwsdew H Nudspfx Aaaok Chemcassette Detection System / Toxic Gas Monitor

Condition: used, functionality: unexamined, machine/vehicle number: Infinity GPS-4, Used Aeronex Infinity GPS-4 Gas Purification System Manufacturer: Aeronex Inc. Model: Infinity GPS-4 Description: CDA Gas Purification Cabinets / Auto-regeneration System / Purifiers Bwodpfjxn Nc Uox Aaaok Max Flow: 130 SLM Max Pressure: 150 PSIG Filtration: 0.003 Micron 220V (EU-standard)

Condition: good (used), Year of construction: 2007, functionality: fully functional, power: 7.63 kW (10.37 HP), total width: 2,300 mm, total length: 4,000 mm, total height: 3,000 mm, type of input current: three-phase, pressure: 6 bar, input voltage: 400 V, nominal heat output: 950 kW (1,291.64 HP), operating pressure: 6 bar, Equipment: hot water, type plate available, The Pyrtec boiler system is an underfeed stoker combustion unit with internal grate and burnout grate for universal application, and is suitable for a particularly wide fuel spectrum, ranging from dry wood waste to wet forest wood chips. Maximum water content w= 50%, corresponding to a wood moisture u of 100%. The complete boiler system is type-approved (Approval No.: 02-221-512) with continuous quality control by TÜV and consists of the following components: Bsdjxwhw Aopfx Aaaowk FEED AUGER WITH BACK-BURN BARRIER LAYER: The feed auger transports the fuel into the combustion chamber and the grate area of the fireblock. The robust auger flights are made from heat-resistant chromium steel in the combustion chamber area. The feed tube is equipped with mounts for the back-burn thermostat and the thermal extinguishing valve. Above the auger is a dosing container with a photoelectric sensor for level control of the fuel barrier layer required by TRD 414. The drive is provided by a maintenance-free helical gear motor and chain drive enclosed in a dust-tight chain guard. Accessoires: Extinguishing valve with dirt strainer COMBUSTION BLOCK: Solid combustion block with multiple layers of insulation and high-quality chamotte lining. The feed and grate area consists of the fire chamber, gasification grate, and descending burnout grate. All of these components are made of highly heat-resistant cast steel (Material No. 1.4868), at least 12 mm thick and individually replaceable. This type of primary combustion system has proven to be extremely effective even with challenging fuels (wet sawmill residues, high bark content, etc.). Ash and foreign substances falling through the grates can easily be removed from outside through access holes sealed with covers. The horizontal combustion chamber is optimally shaped for complete burnout and also provides a large ash compartment. The combustion chamber door is heavy-duty, well-insulated, and can be ideally swung aside on a robust double-joint hinge for maintenance purposes. BOILER: Horizontal hot water boiler in three-pass design, mounted on the fireblock, insulated and stylishly clad. The insulated boiler front door is designed to allow the installation of an oil or gas burner. Operating temperature: max. 120 °C Operating pressure: 3.0 bar Test pressure: 6.0 bar FLUE GAS DUST COLLECTOR PYRTEC-140 to PYRTEC-650: Constructed in axial cyclone design, fully insulated and mounted to the boiler. Equipped with two insulated cleaning covers, an ash container with quick-release fastener, and mounting flange for the flue gas fan. FLUE GAS DUST COLLECTOR PYRTEC-1000: Constructed in axial cyclone design, fully insulated, free-standing for optimal placement. Includes two insulated cleaning covers, mounting flange for the flue gas fan, and connection for the ash container. FLUE GAS FAN: Specially designed fan for wood combustion operation, very quiet, with a heavy-duty, heat-resistant motor and flexible heat-dissipating hub. The fan housing can be continuously rotated at the intake, with a round exhaust outlet.

Condition: new, - Metallic finish - Fuel type: Wood or Gas - NP:6317772 Bwodpfew Emm Isx Aaajk - Internal dimensions: 1000x1000mm - External dimensions: 1400x1500mm - Opening: 550x280mm - Total weight kg: 1100 - Smoke exhaust pipe (Ø) cm: 20 - Pizza capacity (Ø 28/30cm): 4/5 Gas burner available as an option

Condition: good (used), Year of construction: 2014, functionality: fully functional, still well-preserved wood chip heating system Bsdpfx Aasw Rpdroaswk 60 kW heating capacity year of manufacture 2014 without discharge unit (can be provided if needed)

Condition: good (used), Offer 23501 Gas transfer system with pressure reducer + separator Technical data approx: - Gas transfer system for nitrogen , argon , forming gas , hydrogen - from plasma cutting system + flame cutting system make ESAB - mounted on stainless steel plate as shown - div . pressure reducer + separator - Weight approx. 80 kg Bwsdpfxorf Uqzj Aaask - Space requirement system approx. W 1.6 x H 1.5 x D 0.2 m

Condition: used, Wood chip screening plant Chip screening plant Width 1,9m Length 5.3m Height 0.8m 1st grid 40x40mm 2nd grid 15x15xmm Double scraper for screening system Total length 7.5m (2m straight, 5m upwards) Outer flange width 760x610mm Scraper width 400mm + 250mm Gear motor 4 kW Speed 39 rpm Bwjdpfetxblkex Aaaok

Condition: used, 🔥 For Sale: HDG Compact 15–50 kW Biomass Boiler – Flexible and Compact Wood Chip Heating System 🔥 The HDG Compact 15–50 kW is a versatile biomass boiler – ideal for residential properties, small commercial buildings, or agricultural applications. It is suitable for operation with wood chips and pellets, offers modular output and fully automatic operation, all within a space-saving design. ⸻ Key Features: 🌲 Fuel: Wood chips or pellets Bsdpfxewahhvs Aaaowk ⚡ Output: 15–50 kW 🧠 Fully automatic ignition, fuel feeding, and cleaning 🔧 Compact design – ideal for plant rooms with limited space 🇩🇪 HDG Bavaria – Precision biomass technology made in Germany 💥💰 PRICE: 3,900 EUR 💰💥 📍 Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) ⸻ 💼 Top Heating Systems – ProfiKazán Compact biomass heating systems with maximum flexibility.

Condition: used, For sale: MAWERA 470 kW Biomass Boiler – Robust Industrial Wood Chip Heating System The MAWERA biomass boiler with a rated thermal output of 470 kW is ideal for industrial and agricultural heating systems with a consistently high heat demand. Austrian quality, durable construction, and efficient heat transfer are the hallmarks of this boiler. — Technical Data: Bedpfsmuzq Esx Aaaowk • Fuel: Wood chips, sawdust, wood shavings • Rated thermal output: 470 kW • Combustion system:   ◦ Feed auger for fuel supply   ◦ Combustion chamber with heat-resistant fireclay lining • Control & Air Supply:   ◦ Primary and secondary air controlled via motorized dampers and blowers   ◦ Temperature-controlled regulation with flue gas and combustion chamber sensors • Boiler construction:   ◦ Water-cooled boiler with generously sized heat exchanger surfaces   ◦ Front and rear fire doors for easy access and maintenance — Price: 6,500 EUR net Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán)

Condition: used, For sale: KWB TDS Powerfire 45–150 kW Biomass Boiler – Versatile Wood Chip and Pellet Heating System The KWB Powerfire TDS 45–150 kW is a flexible and powerful biomass boiler – ideal for apartment buildings, commercial properties, or agricultural applications. Bwsdpfxjhikbuo Aaaok Suitable for wood chips and pellets, it impresses with fully automatic operation and high efficiency across the entire output range. --- Key Features: Fuel: Wood chips / Pellets Power: 45–150 kW Fully automatic system with modulating output adjustment Industrial-grade, low-maintenance construction KWB – Austrian quality for commercial biomass heating PRICE: 7,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) --- Top Heating Systems – ProfiKazán Smart biomass heating solutions from leading Austrian manufacturers.

Condition: used, For Sale: KWB Multifire 20–80 kW Biomass Boiler – Flexible Heating with Wood Chips and Pellets The KWB Multifire 20–80 kW is a fully automatic biomass boiler, ideal for apartment buildings, commercial facilities, or agricultural operations. It can be operated with both wood chips and pellets, offering maximum fuel flexibility, reliable performance, and high efficiency. — Key features: • Fuel: Wood chips / Pellets • Output: 20–80 kW • Fully automatic combustion, feeding, and cleaning • Robust design for continuous operation • KWB – Austrian innovation in biomass heating PRICE: 4,900 EUR Location: Hungary, 9200 Mosonmagyaróvár, Kötöttárugyári út 22 (ProfiKazán) — Bedottqd Nepfx Aaaswk Top Heating Systems – ProfiKazán Flexible biomass heating systems for residential and commercial buildings.

Condition: new, Volumes: available in 10 m³ or 20 m³ versions Product description: The Easyplan is a compact yet powerful drying system designed for both softwood and hardwood drying, as well as for ISPM-15 compliant pallet and wood packaging heat treatment. It guarantees full phytosanitary compliance and consistently provides high-quality drying results across a wide variety of timber species. Installation is completed in less than one day, making it ideal for rapid deployment in small to medium-sized production facilities. The process is fully automated: simply load the kiln and let the system manage the entire drying or heat treatment cycle. Available heating options: - Electric - Gas - Hot water / steam Key benefits: - Capacities of 10 m³ or 20 m³ to match different production requirements - Suitable for both softwood and hardwood - ISPM-15 compliant pallet and wood packaging heat treatment Bwsdpfsw Hfzaox Aaajk - Fully automatic drying process - Fast installation in under 24 hours - Flexible heating solutions to suit available energy sources Easyplan is the ideal solution for companies seeking a compact, fast-to-install timber drying and ISPM-15 pallet treatment system that does not compromise on performance or quality.

Condition: good (used), QUICK WOOD RO800 structuring brush machine or intermediate sanding machine Working width 700 mm, working height 200 mm 2x4 special brushes Brush rotation speed control Bwedpfeyk H Eajx Aaask Rotation speed control for the 2 blocks of 4 brushes each Feed speed adjustment Electric adjustment of the spacing of the 2 conveyor belts Electric raising and lowering of the brushes