Used Bmo Automation for sale (10,638)

Condition: ready for operation (used), From 2016. Complete and ready to be used. Comed with six months warranty. Hodpevrqbkefx Ag Njnu

Condition: excellent (used), 1 X Machinery Automation Ltd Capping line Technical specification: ✅ Manufacturer - Machinery Automation Ltd ✅ Model - MA-CET70 Capping Line. ✅ Cap Types - Screw Cap, Jar, Foamer, Dropper, pre-formed ROPP. ✅ Cap Diameters - 18 – 70mm (extended to 90mm). ✅ Bottle Heigh - 30 – 300mm Hjdpfx Aow E Ey Tsg Njnu Notes: This has been built for glass jars, which include a 43mm cap, a 53mm cap, 73mm cap and 70mm cap. There are 4 x change parts with the elevator to suit these and the capper gets adjusted to suit without any change parts.

Year of construction: 1996, condition: ready for operation (used), X-axis: 320mm, Y-axis: 400mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Hedpjw U Dwbsfx Ag Nonu

Condition: used, Vibratory bowl feeder / sorting device / bowl feeder / vibratory feeder RNA Vibratory bowl feeder, sorting device / screw feeder with vibratory feeder for screwdriving technology Feeding system, feeding device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SRC-N 250-2L Hnjdpfxeuzn Nnj Ag Nsu Ser.- No.: 03611 Year of construction: approx. 2000 Cup diameter bottom: 300 mm Pot diameter top: 350 mm Inner pot height: approx. 25 mm Sorting track width: approx. 30 mm Total height (drive + bowl with sorting track): 380 mm Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 230 Volt, 50 Hz - The conveyor was used for feeding automotive fuses Space requirement: Ø x H: 420 x 390 mm Weight of bowl feeder: 52 kg Linear conveyor / vibratory conveyor / sorting device Manufacturer: RNA Rhein-Nadel Automation GmbH Type: SLL 400-400 Ser. No. 00835 Year of construction: approx. 2000 Maximum rail length: 700 mm Usable weight: approx. 1.5 to 2 kg Vibration frequency: 100 Hz / 6000 min-1 Mains connection: 220 Volt, 50 Hz - Swing plate L x W x H 400 x 65 x 12 mm - Mounted track length 530 mm - Height with oscillating plate 145 mm Space requirement: L x W x H: 580 x 120 x 400 mm Weight of linear feeder: 20 kg Control unit for vibratory drives, control unit, controller, control system for vibratory conveyors / sorting device / bowl feeder / vibrating bowl / vibratory feeder Manufacturer: RNA Rhein-Nadel Automation GmbH Type: ESK-N80 / ESG 90 Mains connection: 0 ... 208 Veff; (230VAC in motor operation) at 230V mains voltage 0 ... 98Vrms; (115VAC in motor mode) at 115V mains voltage Output voltage: 0...208 V (rms) adjustable, (230 V mains) Number of power outputs: 2 Output 1: Circular conveyor, linear conveyor max. 10A adjustable Output 2: Circular conveyor, linear feeder max. 6 A adjustable Total load current: 16 Aeff Sensor inputs: 1 Number of enable inputs: 1 (24V DC) Sensor supply: 24V DC, max 60 mA Sensor delay ON: 0 ... 8 sec. Sensor delay DOWN: 0 ... 8 sec. Power output connection: Hirschmann 7 pol. - Two power outputs - Sensor amplifier with independently adjustable time stages (On / Off) - Soft start (internally adjustable) - External enable input 24VDC Space requirement: L x W x H: 260 x 190 x 140 mm Control unit weight: 3.6 kg All devices tested and in good condition

Year of construction: 2020, operating hours: 1,800 h, condition: good (used), functionality: fully functional, machine/vehicle number: 50850283/P.0000893.03.05, The assembly line is a production system consisting of three separate units, interconnected by conveyor belts. In the first section, consumable materials are fed in via rollers, folded, the nose clip is integrated, welded, and then cut to the correct length. The finished mask blanks are transported via an indexing conveyor and additional transport belts to the next units, which are arranged in parallel. Each of these stations feeds and welds the ear loops to the mask body. The line is suitable for the manufacture of surgical and general medical face masks, made from single- or three-layer PP (polypropylene) nonwoven fabric. System configuration Each production cell is based on an aluminum profile frame with swing doors made from Makrolon. For the required process stability, the stations are mounted on a solid aluminum table plate. The control cabinets are integrated into the frame. The equipment includes, among others, 3 ultrasonic welding units, Siemens PLC control, and various pneumatic systems from Festo. Performance requirements Hnsdpfxsw Dn Uwj Ag Nou Output (gross): ≥ 80 units/minute Technical availability: ≥ 90% (VDI 3423) Required floor space for the complete system: approx. 6,000 x 5,000 mm Connection values Electrical connection: Operating voltage: 3P/N/PE 400 V AC 50Hz Mains fluctuation: ± 5% Short-circuit design: < 10kA Network type: TN-S Pneumatic connection: Compressed air: 6 bar ± 1 bar Ambient conditions Temperature range: 10°–35°C Max. humidity: 75% (non-condensing) Emissions Sound pressure level during operation: ≤ 78 dB(A) according to EN ISO 11204:2010 The machine is currently out of use and was regularly serviced during its operational period. At present, the machine is dismantled, with individual components stored under dust protection. Upon request, we can also sell our remaining raw material stocks for production.

Condition: new, Year of construction: 2025, Robot cell for pallet making Ekatech Automation AB Robot Nailer 4017 Hjdpfxsq Iv Edj Ag Nenu

Year of construction: 2020, condition: as good as new (ex-display), Here we offer you a resistance welding machine. The equipment is designed for automated resistance welding of the following connections: Housing + QLT Housing + Heater Service Unit P450 Welding pump + Flange P 800 The equipment is loaded and unloaded manually by one operator. Any use of the system other than the one described above is not in accordance with the intended use and is therefore not permissible! Layout of the unit Welding unit Sledge unit Cleaning unit weding electrode Base Linear unit Analysis unit DMC Dimensions (lxw) mm 1700x1200 Cycle time sec. ≤ 30 - 35 Techn. availability % ≥ 95 Operator piece 1 Voltage V 400 AC Frequency Hz 50 Control voltage V 24 DC Back-up fuse A 50 Rated current A approx. 17 Compressed air supply bar 6 Year of construction 2020 Components of the plant -control cabinet -Protective enclosure -Linear unit Toothed belt axis Festo DGE-25-700-ZR-LKRV Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNNN Transmission ratio i=5 Feed constant = 63 mm/rev Reference switch: BES 516-324-G-E5-C-S49 -Slide unit Balluff BES M08EC-PSC15B-S49G -evaluation unit DMC: Keyence SR-1000 -welding unit Spindle axis horizontal Hnodpfxoht U Sns Ag Nsu Compact module CKK 110-250 without brake Bosch servo motor: MSK030C-0900-NN-M1-UG0-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Spindle axis vertical Compact module CKK 110-100 with brake Bosch servo motor: MSK030C-0900-NN-M1-UG1-NNN i=1 p=5mm Reference switch integrated: Hall PNP normally open Welding gun Crede PSZ-K Control unit : ST-T13V2.0 Power unit : LT- [...]

Condition: good (used), Year of construction: 2014, 1 x PA Rotary Pot fill and seal machine Type: Fastfill FP-8 Serial number: FP8-MC-00010 Year: 2014 Hnsdpswthwwsfx Ag Nou Located in Melksham, Wiltshire

Year of construction: 1999, condition: ready for operation (used), X-axis: 500mm, Y-axis: 230mm, Z-axis: 90mm. No defects known, regularly maintained, without accessories or spare parts. The machine has already been dismantled. An on-site inspection is possible, not under power. Hnsdpfow U Dwhex Ag Nou

Condition: good (used), WSM Stationary Screwdriving Unit Screwdriving Station Assembly of parts for car radios and navigation systems and for testing them. The assembly station is surrounded by a protective enclosure. The service doors are equipped with monitoring switches with tumbler(interlock). The doors are locked in automatic mode and can only be opened in automatic mode or in manual mode after pressing the Doors button on the control panel. Automatic mode cannot be started when the door is open. Hodjibichspfx Ag Nonu Function sequence The station is loaded with the pre-assembled module via the transfer conveyor. The operating steps of the automatic station with the passage of a WT are described below. In normal operation, all 3 stations work in parallel. - Positioning of the WT with the preassembled assembly in St.2.1 - Lowering of the beam with the scanners and the vision sensor - Scanning of the 3 codes (front panel, front LP, SD LP), comparison with the database - Checking the correct latching of the FFC in the connector - Lifting the carrier and lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in St.2.2 - Positioning of the screwdriver and screwing of the front LP - Lowering the WT onto the belt - Positioning of the WT with the pre-assembled assembly in pc.2.3 - Lowering of the light protection cover and contacting, positioning of the carrier with the test sensors from below - type-dependent testing of the SD + CD lighting slots and pushbuttons - Function test CD eject button - Lowering the WT onto the conveyor > continue If faults occur during the test, they are indicated on the display and can be rectified if possible. To do this, switch to manual mode and open the doors. After the repair and starting of the automatic system, the WT is tested again in the station. If no repair is possible (e.g. screw fault), the WT is marked as NOK in the control system and is not processed further. Manual NOK marking and ejection is also possible.

Condition: good (used), Year of construction: 2008, CNC control, control rack, electronic module -Manufacturer: Power Automation / Innovance Technology, CNC control -Type: PA8000 LW Hnjdpfx Agswubtne Nou -Dimensions: 330/250/H130 mm -Weight: 5.9 kg

Condition: used, Year of construction: 2016, functionality: fully functional, travel distance X-axis: 600 mm, travel distance Y-axis: 855 mm, travel distance Z-axis: 805 mm, overall weight: 12,500 kg, GROB G351 with EROWA Robot Multi Leonardo for 30 pallets UPC 320x320 and master computer EROWA Manufacturing Control V3 Heidenhain iTNC 530 control, used machine, year of manufacture 2016, commissioning 2017, Rotary swivel table, 4th/5th axis, 32 kW, 16,000 rpm, 206 Nm, HSK 63 tool holder, Hnodpew Hxvwefx Ag Nou Tool changer with 34 stations plus 99 in the TM = total 130 tools, Equipment: safety cabin/scratch-resistant glass – through-spindle air – grey/blue paintwork – machine light – rinsing pistol / blow-off pistol – chip conveyor – coolant system – high-pressure coolant 38 bar – tool cleaning system – 3D measuring probe – work area extraction – Blum laser – remote machine diagnostics – rotary distributor in the B axis – preparation for workpiece clamping system – oil skimmer – GSC swivel axis calibration – DCM collision monitoring – automatic work area door – automation interface The machine can be inspected under power!

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, total width: 2,600 mm, Winding/Unwinding Station with Motor Drive Unwinding width: max. 2600mm Unwinding/rewinding via sensor (dancer control) Winding diameter/roll diameter: max. 1200mm Double-sided folding bearings With clamping shaft for 3"/76mm diameter Winding direction switchable left/right Winding speed adjustable via rotary knob Hnedswy H Dvspfx Ag Neu Robust welded frame, powder-coated, winder on castors Regulated drive of the clamping shaft via geared motor and frequency inverter Fully functional. Can be inspected if required.

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, display foil damaged (see photo 2), otherwise normal signs of use, 100% functional, scope of delivery as per photos Hnsdpfoi D Ukusx Ag Nsu

Year of construction: 2001, condition: ready for operation (used), Max. weighing range: 1000g, with Weighing Cell Mettler Toledo TF10-L-P, display of weight values, weight classification and automatic sorting of weighed goods. Hedpfx Agjtqtw Uj Njnu

Condition: new, Year of construction: 2024, functionality: fully functional, load capacity: 3,000 kg, faceplate diameter: 1,020 mm, welding current (max.): 600 A, swivel angle A-axis (max.): 135 °, No reserve price - guaranteed sale at the highest bid! TECHNICAL DETAILS Load capacity: 3,000 kg Center of gravity distance / Eccentricity: 150 mm / 150 mm Maximum tilt angle: 135° Tilt speed: 60 s Rotation speed: 0.033 – 0.66 rpm Dimensions of faceplate Height of top edge of faceplate (horizontal): 797 – 1,820 mm Height of faceplate rotation axis (vertical): 850 – 1,650 mm Hnjdpfx Agewbqmds Nou Diameter of faceplate: 1,020 mm Grooves on faceplate: 4 × 18 mm Operation Handheld remote control: Robust industrial handheld remote control with all operating functions MACHINE DETAILS Weight: 1,800 kg Installation dimensions: 2,100 × 1,300 × 1,050 mm Electrical Specifications Max. welding current: 600 A Input voltage: 380 – 400 V / 3 Ph / 50 – 60 Hz Dimensions as per sketch Total height (maximum): ~2072 mm Maximum height of the center of the axis: ~1472 mm Minimum height of the center of the axis: 650 mm Distance from floor to table top edge: 797 mm Distance from table top edge to center of the axis: 147 mm Rear foot height: 100 mm Outer diameter of rotary table: Ø1200 mm Pitch circle diameter (PCD): Ø489 mm Number of mounting holes: 4 x M16 thread Angle segments on rotary table: 120°, 45° EQUIPMENT - Industrial handheld remote control

Condition: good (used), CNC control, control rack, electronic module Hnjdpfx Ajwt R Irog Nou -Manufacturer: Power Automation / Innovance Technology, Control -Type: Replacement device ArtNo. 181998 -Individual components: see photos -Dimensions: 255/330/H140 mm -Weight: 5.7 kg

Condition: ready for operation (used), BR-Automation 5PP120.1043-37A Power Panel, serial number as per photo, used, minor signs of wear, 100% functional, scope of delivery as per photos Hnedoi D Uitopfx Ag Nsu

Condition: ready for operation (used), Year of construction: 2012, This system consists of filling machine, screwing machine and the transfer from one to the other. Includes two HIBAR Pump 4S3-R2 high-precision dosing pumps and one as a spare part. Formats: 8ml-1000ml. A list of all formats on request. Documentation available. Glass container with pipette: volume: 8ml/28ml/30ml, base dimensions: 28mm/34mm x 34mm/35mm, height: 65mm/67mm/67mm, filling opening: 10mm/10mm/20mm. PET container with pipette: volume: 30ml/50ml/60ml, base dimensions: 32mm/37mm/38mm, height: 68mm/72mm/88mm, filling opening: 10mm/10mm/21mm. PE container with splash: volume: 250ml/1000ml, base dimensions: 56mm x 42mm/85mm x 69mm, height: 140mm/210mm, filling opening: 18mm/19mm. Documentation available. Hjdpor Eqvhofx Ag Nonu

Condition: good (used), Servo drive, servo card, output module, CPU card, input processor, power supply, control card, input card, control, converter, controller -Manufacturer: Power Automation, Servo Controller Hnsdpfxswt Rzlo Ag Nou -Type: MI305 -Dimensions: 300/115/H250 mm -Weight: 3.8 kg/piece

Year of construction: 2018, condition: ready for operation (used), Suitable for the production of 2D/2.5D laminate stacks from thermoset semi-finished products in the "Fiber Placement" process, speed: 60m/min, laying area: 1100x1400mm, with documentation, on-site inspection is possible. Hnodpfxjriurfe Ag Neu

Condition: good (used), Conveyor belt, belt conveyor belt, conveyor belt, belt conveyor, steep conveyor, steep conveyor belt, slat conveyor belt -Manufacturer: FAPRO Autumation, conveyor belt slat conveyor belt on a mobile base frame -Speed: 12 m/min -Conveyor belt width: 600 mm -Conveyor belt length: 2570 mm, dimensions see technical photo. drawing -Outlet height: 1225 mm -Transport dimensions: 2600/690/H1225 mm -Weight: 120 kg Hnodspix Nyspfx Ag Nju

Year of construction: 2021, condition: ready for operation (used), There is one bottle packer A+F Contiflex with an integrated tray erector A+F Multiformer available, max. output: 220 bottles/min, connected load: 14kW, length: 7789mm, width: 1977mm, height: 3284mm, operational hours counter: ca. 600h, with complete documentation, an inspection is possible. Hnedpfx Agjm Nckfj Nsu

Condition: ready for operation (used), Year of construction: 2001, With documentation, an inspection is possible. Hnjdjf Ddrlopfx Ag Nou

Year of construction: 1997, condition: ready for operation (used), Suitable for testing steel drums for tightness, drum diameter: 574-598mm, max. drum weight: 30kg, drum temperature: 10-50°C, with documentation. Hnodpfem H Uqkex Ag Nou