Used Board Cutter for sale (6,818)

Condition: good (used), Complete trimming line with 2 trimmers RS 134 and a bump turn EM 130 Speed: up to 100.000 cph / 80 m/min (product permitting) min width product: ~122 mm max width product: ~530 mm min length product: ~122 mm max pagination product: 4-96p (product permitting) max thickness shingled stream: up to 13 mm infeed stream lap: ~25-100 mm min trim width: ~5 mm max trim width: ~65 mm min product width after trim: ~118 mm Infeed/delivery height: ~800 mm Trimmming line with 1st trimmer - right bump turn - 2nd trimmer Trimming line - 1st trimmer knife left Trimming line - 2nd trimmer knife left & right To be used with segmented knives Over all length equipment: ~1675 mm Over all width equipment: ~1530 mm Over all height equipment: ~1160 mm Nlodpfxel Dn N Ss Aazeg Input Power: 7,5 kW Voltage: 400 V, 3 Ph, N, PE Air requirement: practically no air requirement Suction capacity per nozzle: 900 m3/h, air speed 31m/s Weight: ~1100 kg per trimmer Optional equipment: second EM 130 bump turn

Condition: refurbished (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: A-251101 + A-251102, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 12 mm, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 4 A, year of last overhaul: 2026, cutting height (max.): 150 mm, A-251101 Slicer: For sale: Item A251101. Holly Slicer, painted frame and stainless steel body. Machine information: Total machine length: 1.9 meters Total machine width: 1.0 meters Total machine height: 2.1 meters Machine working height: 0.9 meters Machine capacity: 1800 loaves per hour Electrical information: Power connection: 400 volts, neutral and earth. Power consumption: 3.2 kilowatts. Plug connection: CeeForm 5-pin 16 Amp. (round red plug.) Compressed air: Not required. Minimum and maximum product dimensions: Products from 100 to 320 mm long. Products from 80 to 210 mm wide. Products from 40 to 150 mm high. Machine version: Frame made of painted steel, RAL 7046. Deck, stainless steel ASI 304 and plastic rollers and 2 side belts, manufacturer Hoba. Band slicing machine, mounted on nylon wheels. A-251102: Semi-automatic packaging line. Item A-251102 Refurbished semi-automatic (manual) packaging line equipped with a blowing table, Kwik Lok brush machine, and clip-closing machine. Semi-automatic (manual) painted packaging line equipped with a Kwik Lok brush machine, type 1082, a Kwik Lok clip-closing machine, type 871A, and a bag-opening blowing table. Machine direction of operation: left to right Machine information: Total machine length: 3.5 meters Total machine width: 1.5 meters (including blowing table) Total machine height: 1.8 meters Working height: 0.75 meters Length of conveyor section: 1.8 meters Length of roller conveyor: 1.0 meter Conveyor flight spacing: 305 mm Machine capacity: 1800 packages per hour Electrical information: Power supply: 400 V, N + PE Connected load: 1.2 kW Plug type: CEE-Form, 5-pin, 16 A (round red plug) Compressed air required: No Minimum and maximum product dimensions: Product length: 100–350 mm Product width: 80–210 mm Product height: 40–160 mm Machine description: The frame and both leg assemblies are manufactured from painted profiles, manufactured by Waterlander. The machine is equipped with a Kwiklok brush machine, model 1082, and a Kwik Lok clip-closing machine, model 872, year 1995 (completely rebuilt), suitable for Kwik Lok JNRP clips and Schutte clips. At the end of the packaging line, a 1-meter-long roller conveyor is provided for manually removing the packaged products. The machine is mounted on wheels and is equipped with conveyor flights with a fixed transport speed. The machine is fitted with a completely new control system and has been fully refurbished. The machine is finished with a two-component, high-durability topcoat. The machine is suitable for packaging food and non-food products in plastic bags. Included: with the machine, a painted Hoba blowing table, stainless-steel top surface, and product guides. Nljdpfsz Ervpox Aazjg

Condition: used, Year of construction: 2008, total width: 2,400 mm, total height: 2,500 mm, total length: 8,000 mm, Colour: Grey Empty weight: 8.000 kg Track: 8000x4500mm Nledpfxez Aipqe Aazeg Travel: 6000x2500mm Sheet-thickness: 2-40mm plasma, 150mm autogeen Off-line software: Libellula Many belongings and consumables. Without exhaust-system - Year: 2008 - Documentation available: Yes - CE marking present: Yes - CE certificate present: Yes - Drive system: CNC - Resonator brand: Precision - Resonator type: Plasmarc 401 - X-axis travel [mm]: 6000 - Y-axis travel [mm]: 2500 - Table length [mm]: 6000 - Table width [mm]: 2500 - Max. material thickness [mm]: 40 - Options: Offline software, Oxy-fuel cutting - Control type: Vision 52 - Transport dimensions: 8000mm x 2400mm x 2500mm (l x w x h) - Transport weight [kg]: 8000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), machine/vehicle number: 011001, Untrimmed Book Size: Max. Spine Length 350 x Fore-edge Length 320 mm Njdpez D U Hnsfx Aazslg Limitation: The maximum length from the center to top or bottom is 175 mm Min. Spine Length 148 x Fore-edge Length 105 mm Limitation: The minimum length from the center to top or bottom is 74 mm Finished Book Size: Max. Spine Length 340 x Fore-edge Length 300 mm Limitation: The maximum length from the center to top or bottom is 170 mm Min. Spine Length 145 x Fore-edge Length 101.6 mm Limitation: The minimum length from the center to top or bottom is 72.5 mm Trim Width: Fore-edge: Max. 110 mm / Min. 1 mm Top and bottom: Max. 80 mm / Min. 1 mm Trim Height: 1 to 65 mm Book Weight: Transport Speed Level 7: 2.8 kg or less Transport Speed Level 6: 4.0 kg or less Transport Speed Level 5: 5.2 kg or less Height of Entrance Section Pusher: 56 mm Clamp System and Pressure: Servo Motor 2 kN to 8kN Production Speed: 400 to 1,000 cycles per hour

Condition: used, Year of construction: 1998, This model of machine is fitted with 2 independent sensitive hydraulic copy units that can work from either a template or sample. The first cutter would be set for roughing out, the second one for the finishing cut that will enable a component to be produced in one pass. There is still the possibility to programme a second automatic pass of the finishing gouge for heavy work. The machine is also equipped with hydraulic tailstock unit and hydraulic operated back knives. Year - 1998 CE The unique feature of the T5E is saddle movement by precision recirculating ball screw with programmeable electronic control to the feed speed to ensure optimum turning flexibility and quality. This precision feature allows the operator to perfectly control the saddle advance in relation to the complexity of the turning and the optimized saddle speed can then be stored within the memory of the machine. 2000mm turning capacity between centres NC electronic control to saddle movement with infinitely variable feed 0 to 12m/min Two speed 4/5.5hp motor giving six spindle speeds 900-1500-1800-2250-3000-4500rpm Two Hydraulic Copy Units each mounted with horizontal vee type gouges hss Nledpfx Aaozd Uv Ejzeg 2 Vertical back slides with knives for making dowel ends Max 95mm x 95mm square section with revolving Steady Max 175mm x 175mm square section without Steady Sliding guard for operator protection CE safety equipment

Condition: used, axle configuration: 3 axles, first registration: 09/2015, color: other, Year of construction: 2015, Empty weight: 6.860 kg Axle 1: left 8 mm right 8 mm Axle 2: left 6 mm right 6 mm Nlodpfx Aaozrk Slszeg Axle 3: left 6 mm right 6 mm

Condition: excellent (used), Year of construction: 2003, 2003 Mitsubishi CNC Shaving Gear cutter grinder Model ZA30CNC, Year 2003, With Fanuc Series 16i-M HMI, Includes FN-0013 Dust Collector, Power 200/220 Volts / 3 Phase , Weight 15000 Lbs. Njdpfx Aasywftkozolg

Condition: excellent (used), Roughing and finishing cutters MK 3 HSS Diameter from 20 - 30 mm Approx. 9 kg Nsdpfx Aezw U S Heazjlg

Year of construction: 2023, condition: used, Model: K970 Condition: Good Includes 400 mm saw blade Price: € 600,- excl. VAT Nsdpfx Aaszzf A Rezslg

Condition: used, Year of construction: 2009, HOLZ-HER edge banding machine CONTRIGA 1366 Edge thickness: 0.4-30 mm (depending on equipment) Edge height: 51/66 mm (depending on equipment) Panel thickness: 6-45/60 mm (depending on equipment) Edge types: Rolls and strips Feed speeds: Continuous feed from 12-30 m/min (depending on equipment) With adjustable infeed level in the magazine area (max. adjustment range 30 mm) With height-adjustable magazine plate for changing the lower edge overhang With large magazine plate Ø 820 mm for edge rolls up to Ø 800 mm With transport chain including automatic central lubrication With motor-driven, position-controlled bridge height adjustment With pneumatic locking roller for the shortest workpiece sequence With extendable workpiece support (extension width 1600 mm) With space-saving, pneumatically controlled sliding hoods over the entire machine (Deviations for individual units are possible) with motorized infeed guide with injection oiler for lubricating all joints and bolts (including operating hours counter) with central connection for extraction (2x Ø 200 mm) with integrated chip collection box at the end of the machine (when radius scraper unit is installed) PPC 231 control system - Power PC for efficient setup and changeover - 15" SVGA screen with touchscreen - 128 MB CF memory card - USB connector on board - Ethernet network connection - Keyboard connector on board - Windows-like user interface - all information in plain text and/or graphics - Rotatable and pivoting control panel at eye level - Dust-proof membrane keyboard with softkeys (pushbuttons) - LED display for unit preselection - Program list with program names and numbers - Extensive program memory - Individual selection of the units with the functions as basic setting options for setpoints, route points and tool corrections as well as the fixed route points - Centralized and clear setup processes for units and their axis settings via fine adjustment (depending on the equipment) - Interval display for the shortest workpiece distance - Integrated path control - Path points are controlled generally or program-specifically - Clear and complete recording of all operating data - Service messages in plain text - Diagnostic system - including integrated synchronous bus system for high precision in unit control - Individual administration for up to ten users, including password protection - Online maintenance (optional), data exchange with HOLZ-HER Service - Barcode interface (optional) BASIC MACHINE CONTRIGA 1366 - Belt bridge Options and accessories for the basic machine Spraying device 1856 for the inlet and outlet area For the inlet area: Electronically controlled release agent sprayer with Riepe-LPZ/II release agent For the outlet area: Electronically controlled cleaning agent sprayer with Riepe-LP163/93 cleaning agent (only in conjunction with pre-milling unit 1961 and surface scraper 1964) Joint milling unit Joint milling station 1803 (2x 2.6 kW, 200 Hz, 12000 min-1) With two plunge-controlled milling units 1 unit in up-cutting direction 1 unit in down-cutting direction Plunge path 5 mm With static frequency converter 200 Hz Without milling tool With ProLock screw-in clamp for fast tool changes Tool for 1803 (workpiece height up to 60 mm) Diamond milling cutter PRO UT 2 pieces (front and rear) including protective covers Ø 100-63 - Ø 30 mm, Z = 3 + 3 + 3, 1x left-hand rotation, 1x right-hand rotation Noise-reduced milling cutter with integrated chip guide DFC technology (Leitz syst Njdpfx Ajvvkfdsazslg

Condition: used, functionality: fully functional, Year of construction: 2003, ALLOY CUTTING MACHINE, used AUTOMATIC, IMET VELOX 350 AF-E. FULLY OVERHAULED Nsdpfx Aaezh Ugfjzjlg

Year of construction: 2008, condition: excellent (used), functionality: fully functional, Technical specifications • Sheet width: 1700 mm • Maximum sheet dimensions (X/Y): 1700 mm / 4000 mm • Minimum sheet dimensions (X/Y): 300 mm / 600 mm • Cardboard thickness: from 2 mm to 8 mm • Single production run: 200–600 units/hour • Maximum multi-unit production capacity: up to 2000 units per hour • Machine weight: approximately 4500 kg Njdpfxsz A Tfgo Aazolg • Machine dimensions (X/Y/Z): approximately 5500 mm / 4000 mm / 1900 mm

Condition: used, Year of construction: 2006, functionality: fully functional, Distecno Flap Box Production Line – For Sale FOR SALE – DISTECNO FLAP BOX PRODUCTION LINE, 2006 Price: only €25,000 - Machine is currently in production and available from October 2026. Nlodjzznxbepfx Aazsg - Automatic vacuum lead-edge feeder. - 2 flexographic printing units – top printing, chrome-plated (+1 additional printing unit requiring refurbishment). - Anilox rolls + rubber rolls (2 rolls refurbished in 2019). - Automatic slotter. - Automatically adjustable folder-gluer. - Automatic delivery section with stacking, counting, and bundling of finished packages. - Maximum sheet size: 1,677 × 2,500 mm. The machine is in good working condition and is currently in production. - Full machine documentation available. - Machine dimensions (net): 17 m × 4 m. - Production capacity: up to 10,000 sheets/hour, depending on box size and the efficiency of the operators at the feeder and delivery sections. - The machine processes corrugated cardboard from 310 g/m² to 1,500 g/m². Availability: October 2026 For sale: DISTECNO FLAP BOX PRODUCTION LINE from 2006 Price: only 25,000 Euros - Machine is continuously in production, available in October 2026 - Automatic vacuum lead-edge feeder - 2 flexographic printing units – top printing, chrome-plated (+1 printing unit requiring repair) - Anilox rolls + rubber rolls (2 rolls refurbished in 2019) - Automatic slotter - Automatically adjustable folder-gluer - Delivery section with stacking and counting of packages - Max sheet format: 1677 x 2500 mm The machine is in good condition, in production, and available immediately. The machine has complete documentation. Net machine dimensions: 17m x 4m Capacity: up to 10,000/hour, depending on the size of the packaging and the efficiency of the operators at the feeder and delivery sections. The machine processes corrugated cardboard from 310 g/m2 to 1500 g/m2.

Condition: refurbished (used), Year of construction: 2019, functionality: fully functional, machine/vehicle number: A-260606, input voltage: 400 V, warranty duration: 3 months, cutting width (max.): 77 mm, overall weight: 300 kg, type of input current: three-phase, control voltage: 24 V, input frequency: 50 Hz, input current: 2 A, cutting height (max.): 100 mm, Object A260606 Refurbished Gingerbread/Cake Slicing Machine Fully refurbished gingerbread slicing machine with a cutting thickness of 77 mm. All electrical switching equipment and pneumatic components have been replaced in accordance with the latest state of current technology. By equipping the machine with two-hand operation, it has been made very safe to operate. Machine Information: Overall machine length: 1.6 meters Overall machine width: 1.25 meters Nljdpoz Erybjfx Aazsg Overall machine height: 1.3 meters Machine working height: 0.9 meters Distance between knives: 77 mm Machine Capacity: 240 wide slices of bread per hour Electrical Information Power supply: 400 V, N+PE Power consumption: 1.0 kW Plug type: CEE-form, 5-pin, 16 A (round red plug) Compressed air required?: Yes Minimum and Maximum Product Dimensions Product length: 100–500 mm Product width: 80–755 mm Product height: 40–100 mm Machine Description This cookie slicing machine has been completely refurbished. The machine was fully disassembled, thoroughly cleaned by blasting, and coated with a durable two-component finish. It was then completely rebuilt. The machine is equipped with new bearings, a new drive motor, new pneumatic components, and a renewed and improved electrical system based on the latest technology. The machine is mounted on wheels. The speed of the product pusher is adjustable, allowing it to be adapted to the type of product being processed. This machine is in like-new condition! The machine is suitable for slicing breakfast cake (gingerbread-style cake) and/or currant bread. The machine is equipped with two swivel castors with brakes and two fixed castors. Warranty: 3 months (excluding knives)

Condition: used, Year of construction: 2012, - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit Film cutter Manufacturer: HSM Maschinentechnik Type: ABW - ROTA - 2200 Year of manufacture: 2012 Technical data - Cutting width 2200 mm - Equipped with an IR pre-heating zone and cooling unit - Front: semi-automatic roll change - Rear: individual sheets are automatically stacked on a pallet Nsdpfezuy Arsx Aazolg Note: The technical data and descriptions are copies of the original order confirmation. The information is provided for informational purposes only and is not binding.

Condition: good (used), Laska KU 45 VKAB bowl cutter with cooking and vacuum options. Has come from a pilot plant in a major food company so has not been used very much. Complete contents of pilot plant also available. Nlodex Ilqdepfx Aazog

Condition: good (used), Storage location number: 3134 Manufacturer: Kuhlmann (Hahn & Kolb) Njdpfx Aaozy I D Ijzelg Type: Machine number: Grinding spindle speed: 2,750 rpm Max. collet diameter: 17.5 mm Max. radius to be ground: 10 mm Coarse adjustment of the workpiece carrier: mm Max. fine adjustment of the workpiece carrier: mm Power of the drive motor: 0.25 kW Dimensions: 430 x 450 x 350 mm Weight: 32 kg

Condition: good (used), Year of construction: 2017, NNP Rotary moulder Stainless, belt dimensions 2250mm x 650mm, 650mm rotary moulder, previously used for pizza bases, with top mounted oil spray nozzle Nedpfx Aaeuanp Nozelg

Condition: new, functionality: fully functional, Year of construction: 2025, control type: CNC control, actuation type: electric, laser type: fiber laser, laser power: 12,000 W, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, Equipment: CE marking, centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Equipment model: NS56FG Maximum tubelength: Nljdpfxjww Umae Aazsg

Year of construction: 2017, condition: excellent (used), functionality: fully functional, Hello, we are offering our 2017 Rabolini die-cutting machine/die-cutting system, which has been completely overhauled. Nledozxufvepfx Aazjg The maximum die-cutting format is 100 cm x 140 cm, with a cutting force of 360 tons. Die-cutting principle: flat/flat. Weight of the machine: 8,100 kg. The die-cutting machine is located on the ground floor, on a well-accessible industrial concrete floor. Documentation, CE declaration, etc., are all available! The machine can be inspected and tested while in operation. We would be happy to assist with training and instruction on how to operate the machine. The machine is located in D-41751 Viersen and is available for inspection. If you have any questions about the machine, please do not hesitate to contact us.

Condition: ready for operation (used), Ewag WS11 Standard microscope, top view. Nsdpfxezwz Ube Aazjlg

Condition: excellent (used), 1 piece HSS milling cutter various diameters roughing and finishing cutter with diameters from 14 - 40 mm Nljdpfezw U S Tex Aazog very good condition 17.5 kg

Condition: like new (used), functionality: fully functional, A very nice slitting and creasing machine is for sale. Brand: Duplo, model DC 615, with belt suction, 220 volts. Features a USB connector and LCD screen. You are welcome to test this machine at our location. We can arrange transport and packaging for you and load it into a truck or container. Please inquire for a price including transport (within the Netherlands). Njdpfxezyak Te Aazelg Best regards, Henk Hoos

Condition: new, ✔ Band sawmills ✔ Multi saws ✔ Edge cutters ✔ Milling machines for pallet boards ✔ Wood cutters Why Boldrew? ✅ Over 30 years of experience in the industry ✅ Professionalism and precision ✅ Customer service in Europe, America and Africa We invite you to cooperate! Mobile band sawmill TS-1200 H Mobile band sawmill TS-1200 H Innovative technology for woodworking professionals The mobile band sawmill TS-1200 H is a technologically advanced machine designed for efficiency, precision and reliability. Thanks to its mobility and modern hydraulic solutions, the machine will meet the expectations of even the most demanding users. --- Technical data ·Length of the cut log: 100–820 cm Track bed: 6 meters, with an additional 4 meter long hydraulically folding segment ·Diameter of the processed log: up to 950 mm ·Band saw guide wheels: Ø 600 mm Band saw: ·Length: 4800 mm ·Width: 40-50 mm ·Main engine: Briggs & Stratton Vanguard V-Twin 35 HP combustion engine ·Generator: 8 kW to power additional components ·Head lifting system: Double-sided chain drive 16 B ·Feed control: Stepless adjustment for maximum control ·Saw tension: Hydraulic ·Debarker for the first log preparation Nlsdpsvvw R Tjfx Aazog ·ISP 10 cutting thickness gauge ·Electrically operated roller ·Adjustable Angle supports (load capacity 600 kg each) ·LED lighting, ideal for working in different conditions --- Advanced hydraulic kit The efficient hydraulic system allows easy and quick handling of the logs: ·Hydraulic support arms - stabilization of the log during cutting Log loading - 2 individual cylinders for operator comfort ·Wood leveling - 2 adjustment points ·Log pressure - 2 points for precise clamping ·Chain turner - 2 points, facilitates handling of the log ·Hydraulic motor: 8 kW Briggs & Stratton combustion engine with efficient hydraulic pump Mobility and durability Mobile axle: Double ALKO with brake and height-adjustable drawbar Construction: Solid and resistant to difficult working conditions Transport: Easy thanks to mobile chassis and compact dimensions Advantages of Trak A-1200 M 1. Versatility: Ability to cut large logs with different diameters and lengths 2. Mobility: Perfect for working in sawmills and directly in the field 3. Efficiency: Fast and precise cutting thanks to modern hydraulic systems 4. Operator comfort: Intuitive controls and ergonomic solutions

Condition: good (used), Year of construction: 2013, laser cutter: TruLaser 3040 Machine type: CO2 Laser Year: 2013 Software: TRUMPF CNC basierend auf SINUMERIK 840D sl Working hours: Strahl 31.822 h h Working hours: Laser 62.603 h h SPECIFICATIONS laser: TRUFLOW 4000 Nedpfxjzi Arfs Aazslg laser capacity: 4.000 W W Travel X-Axis: 4.000 mm Y-Axis: 2.000 mm Z-Axis: 115 mm Max. workpiece weight: 1.700 kg Genauigkeit Maximale Positionsstreubreite Ps max: +/-0.03 mm Positionsabweichung Pa: +/-0.05 mm Kleinstes programmierbares Wegmaß: 0.001 mm max. Sheet Thinkness Steel : 20 mm Stainless steel : 15 mm Aluminum : 10 mm Lasergasverbrauch HE (4.6): 13 l/h CO2 (4.5): 1 l/h N2 (5): 6 l/h Anschlussleistung Maschine: 62 kVA Anschlussleistung Kühlaggregat: 26 kVA Req. space (LxBxH): 12 x 5,3 x 2,2 m Weight: 14.500 kg Equipment geschlossener Maschinenrahmen Palettenwechlser LiftMaster Längsförderband Lichtschranken Bedienpult mit Touchscreen Leider können wir hierfür keine Dienstlesitungen anbieten