Used Bored for sale (4,631)

Condition: new, travel distance X-axis: 2,000 mm, travel distance Y-axis: 2,050 mm, travel distance Z-axis: 1,500 mm, table load: 8,000 kg, spindle diameter: 110 mm, spindle speed (max.): 3,000 rpm, table length: 1,600 mm, table width: 1,440 mm, feed rate X-axis: 10,000 m/min, feed rate Y-axis: 12,000 m/min, feed rate Z-axis: 12,000 m/min, travel distance W-axis: 500 mm, workpiece weight (max.): 8,000 kg, quill travel distance: 500 mm, quill diameter: 110 mm, overall weight: 25,000 kg, Equipment: rotational speed infinitely variable, BRAND NEW BORING MILL (T-CONSTRUCTION) Controls and Motors: HEIDENHAIN TNC 640 digital path control HEIDENHAIN package: motors, measuring systems, and handwheel IKZ: Internal coolant supply, 20 bar Additional Equipment: Chain-type tool changer with double gripper, 60 positions Double hinge belt chip conveyor (longitudinal), one at the front and one at the rear Gjdjxc Hphspfx Abdsil Perimetric enclosure Spindle support bearing 250mm Hinged belt chip conveyor RENISHAW RMP 60 touch probe Only inquiries from Germany will be answered.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, input frequency: 50 Hz, power: 3,028 kW (4,116.93 HP), empty load weight: 10,000 kg, fuel: domestic gas H, control cabinet height: 2,000 mm, control cabinet length: 600 mm, control cabinet width: 800 mm, nominal power: 2,679 kW (3,642.42 HP), rotational speed (min.): 1,500 rpm, type of cooling: water, GE Jenbacher JMS 616 GS-N.L Gas CHP Unit Fuel Type: Natural Gas Electrical Output: 2,433 kW Thermal Output: 2,420 kW Total Efficiency: 85.6% Electrical Efficiency: 42.9% Thermal Efficiency: 42.7% Voltage: 690 V Frequency: 50 Hz RPM: 1,500 Engine Configuration: V16 (60° angle) Bore x Stroke: 190 mm × 220 mm Displacement: 99.8 L Fuel Consumption: Approx. 597 Nm³/h (at LHV 9.5 kWh/Nm³) Noise Level: 101 dB(A) at 1 metre Dry Engine Weight: approx. 10,000 kg Dimensions (L×W×H): 8,300 × 2,200 × 2,800 mm ⚙️ Included Equipment Turbocharged engine with intercooler STAMFORD LVSI 804 W alternator (rated 3,555 kVA) LEANOX control system Electronic ignition system Full lubrication system (pump + filters) Gisdpfjwptfrjx Abdsl Heat exchangers for coolant and oil Control panel with visual interface Pre-heating system Gas train according to DIN-DVGW standards

Condition: used, Used 5.9 MW Wartsila Vasa 18V32DF dual fuel cogeneration plant built in 1998 with ABB HSG 900 LS8 generator. Plant includes: Gedpfjw U A I Esx Abdoil - Wartsila VASA 18V32DF engine. This is a turbo-charged, intercooled four stroke gas engine with direct pilot fuel injection with the following specifications: Vee configuration, 18 cylinders, 320mm cylinder bore, 350mm stroke, 750 rpm, 2 inlet valves/cylinder, 2 outlet valves/cylinder, clockwise rotation and nominal output of 5901 kWm. - ABB HSG 900 LS8 generator. This is a self-cooled, 3-phase, brushless, synchronous, two bearing type generator with the following specifications: 7235 kVA, 0.8 power factor, 11000 V, 380 A, 50 Hz, 750 RPM, 900 RPM, insulation class F, IP21 protection and IEC34 standard.

Condition: excellent (used), Year of construction: 1994, Arm Length: 1600mm Max. drill Ø cast: 60mm Max. tap Ø: 42M Stroke pinole: 310mm Max. distance spindle - table:1505mm Min. distance spindle - table:320mm Floor / table area: 1470x986mm Speeds / ranges: 2500Rpm Spindle Taper: 6ISO/Bt/Mk Quill Ø: 55mm Power: 4kW Length: 2900mm Width: 1200mm Height: 3200mm Weight: 4700kg Gedpfox Sx D Sex Abdsil Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: 3096524, MACHINE SPECIFICATION Swing over front apron 641mm Swing over cross slide 413mm Maximum cutting diameter 356mm Maximum cutting length 356mm Spindle nose A2-5 Spindle bore 58.7mm Bar capacity 44mm Maximum spindle speed 6000rpm Spindle motor power 11.2kW Number of turret tool stations 12 Rapid traverse Z/X axis 30.5m/min Approximate weight 2500Kg Gjdpfsx R Sb Ijx Abdsil MACHINE EQUIPPED WITH Haas CNC control system 3 jaw chuck 165mm diameter Collet chuck Parts catcher Hydraulic tailstock Tool presetter Assorted tool holders Interlocked guarding Automatic lubrication system Coolant system

Condition: good (used), Year of construction: 2013, CNC MATRIX 2 , Maximum diameter 658 mm, travel X 615 mm, travel Z 1585 mm, travel Y 250 mm, bar passage 102 mm bore 112, spindle speed 35 to 2200 rpm, milling spindle 35 to 12000 rpm, 5 simultaneous axes, mm, 36 tool magazine Capto C6, RENISHAW preparation, steady rest support, chip conveyor. Gijdpouqkttefx Abdel

Condition: new, Year of construction: 2026, Standard Equipment: - Robust, high-quality, and inclined rotating hood for easy speed reading - LED lighting - Quick-adjust and ergonomic drilling depth stop - Infinitely variable speed control - Power cable with SCHUKO plug (1.2 m) - Undervoltage release - Drill guard with electrical safety interlock - Emergency stop mushroom button Technical Data: - Weight (kg): 30 - Motor (kW): 0.45 - Single-phase current 230 V - Speed (rpm): 250–3000 - Drilling capacity (mm): 10 • Steel Ø 12 mm • Aluminium Ø 20 mm • Softwood Ø 40 mm • Drilling depth 50 mm • Throat 180 mm • Column diameter 50 mm • Usable working area WxL 300 x 200 mm • T-slots, quantity 2, spacing 100 mm Slot dimensions width 12/20 mm • Spindle B16 • Digital speed display • Drilling depth display: scale • Drilling depth stop: quick-adjust stop ring • Manual feed Optional Accessories: Gedpfx Ajby Stpjbdsil Drilling package 1 consisting of: • Machine vice [felix] 2.0 80 mm • Quick-action drill chuck B16 1-13 mm (accuracy 0.17 mm), €270.00 - FACTORY WARRANTY: 3 years - FREE DELIVERY (within Germany) NOT THE RIGHT MACHINE? We are an official FLOTT service partner and can supply you with any product from the FLOTT range! Request a quote!

Condition: new, The KNUTH R 60 V is a powerful and versatile radial drilling machine designed for exceptional drilling, reaming, and countersinking in steel or cast iron, making it a preferred choice among professionals in production and construction companies. This robust machine features a premium construction with a large column and a highly torsion-resistant boom, ensuring maximum rigidity and minimal clamping offset. With its motorized boom height adjustment and oil-bath lifting gears, operators experience smooth handling, even with large and heavy workpieces. Additional highlights include infinitely variable spindle speeds with a digital display and an integrated coolant system, ensuring reliability and cost-effectiveness. The R 60 V, part of the renowned Radial Drilling Machines group, stands out for its modern design and user-friendly operation. Contact us to request a quote and elevate your drilling capabilities with KNUTH’s exceptional machinery. Giodpeuyic Hefx Abdsl

Condition: used, Hydroptic 7A, No 267, Temp 23deg, Made In Switzerland, 40" Under Rail, Right Angled Head, Boring Head s x(2) and Related Tooling, Gedpjx I R N Sefx Abdsil

Condition: good (used), Year of construction: 1988, turning diameter over cross slide: 900 mm, spindle bore: 105 mm, turning diameter: 1,200 mm, turning length: 5,000 mm, total length: 8,000 mm, total width: 1,800 mm, total height: 1,550 mm, bed width: 650 mm, workpiece weight (max.): 10,500 kg, Motorized tailstock CE-Chuck cover protection Telescopic guide cover over guideways Steady rest  4 chuck 1000 mm diameter 3 chuck 500   mm diameter   2 Axis digital read out system DBC Turning Length: 5000mm Swing over bed Ø: 1150mm Swing over cross slide Ø:850mm Spindle bore: 105mm Bed width: 650mm Tailstock spindle Ø: 140Ø Stroke pinole: 300mm Gijdpfewrxpbox Abdsl Spindle taper: 6Mk Speeds / ranges: 4,5 - 900Rpm Workpiece load: 8000 Length: 8000mm Width: 1800mm Height: 1550mm Weight: 13800kg

Year of construction: 2006, condition: used, total length: 2,500 mm, total width: 2,300 mm, total height: 2,900 mm, Empty weight: 7.500 kg Price: On request - Year: 2006 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 550/16 - Drive system: CNC - Power [kW]: 22.0 - Swing over bed [mm]: 560 - Carriage turning diameter [mm]: 520 - Spindle bore [mm]: 130 - Min. spindle speed [rpm]: 33 - Max. spindle speed [rpm]: 4000 - Options: C-axis, Three-jaw chuck, Facing lathe, Chip conveyor, Live tools Gsdpsxr Aghsfx Abdjil - X-axis travel [mm]: 260 - Z-axis travel [mm]: 600 - Transport dimensions: 2500mm x 2300mm x 2900mm (l x w x h) - Transport weight [kg]: 7500kg - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, The SSB 32 Xn Column Drilling Machine is an exceptional addition to the Drilling Machines product group, ideal for both repair and production tasks in any workshop. Designed by KNUTH, this robust machine features a thick-walled column and powerful gearboxes that ensure precise performance. With its versatile capacity to drill up to 32 mm and a spacious 500x420 mm worktable, it accommodates both small workpieces and larger assemblies effortlessly. The drill head can swivel ±45° for angled drilling, while the integrated coolant system enhances operational efficiency and longevity. Additional features include a digital display for accurate spindle speed monitoring, a protective shield for safety, and an LED work lamp for optimal visibility. The SSB 32 Xn's automatic drilling feed and various clamping options simplify operations. Experience the reliability and performance of KNUTH’s Column Drilling Machines by placing your order now. Gijdpfoww T S Usx Abdol

Condition: used, Hankook Protec 9NC/4000 4m Between Centres, fitted with 630mm Diameter 3 Jaw chuck with 250mm bore, also 800mm 4 jaw with 250mm bore , and 770mm rear mounted 4 jaw with 250mmm bore. 720mm Swing Over Saddle, 1000mm Swing Over Bed, Year 2008.3, Swarf Conveyor, Fanuc 21i Control. Available now under power at site to view, available now for supply. Giodsx I R Emjpfx Abdel Specifications: Swing: 37.4" Machining Length: 157" Power: 26 kW Max RPM: 630 RPM

Condition: good (used), Year of construction: 2008, turning length: 2,000 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, HeidenHain ND780 3 Axis dro Variomatic RPM speedrange  Steady rest Multi fix Tool system DBC Turning Length: 2000mm Swing over bed Ø: 830mm Swing over cross slide Ø:420mm Swing in the gap Ø: 1000mm Gap length: 295mm Spindle bore: 110mm Bed width: 560mm Tailstock spindle Ø: 105Ø Stroke pinole: 225mm Spindle taper: 6Mk Power: 15kW Speeds / ranges: 2000Rpm Feed rate X-Axis: 3000mm/min. Feed rate Z-Axis: 3000mm/min. Workpiece load: 2400 Gisdpfxsxf Ey Rj Abdsl Length: 3700mm Width: 1900mm Height: 1900mm Weight: 5500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1998, total length: 2,600 mm, total width: 1,500 mm, total height: 2,100 mm, Empty weight: 1.500 kg - Year: 1998 - Documentation available: Yes Gsdpfox Ad Uzjx Abdsil - CE marking present: Yes - CE certificate present: No - Serial number: P30162 - Drive system: Teach-in - Control system brand: Fanuc - Power [kW]: 7.5 - Centre height [mm]: 200 - Swing over bed [mm]: 400 - Carriage turning diameter [mm]: 245 - Distance between centres [mm]: 1250 - Bed width [mm]: 320 - Spindle bore [mm]: 55 - Min. spindle speed [rpm]: 15 - Max. spindle speed [rpm]: 2500 - Options: Three-jaw chuck, Removable bed - Swing over removable bed [mm]: 585 - Transport dimensions: 2600mm x 1500mm x 2100mm (l x w x h) - Transport weight [kg]: 1500kg - Transport packages [pcs.]: 2 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, The TSB 35 is a robust and precise column drilling machine that stands out in the category of column drilling machines. Designed by KNUTH, this bench drill series is compact yet delivers high drilling performance suitable for a wide variety of applications, from steel construction to repair shops. The TSB 35 features a powerful spindle gearbox for high torque and an extensive speed range with 12 adjustable levels, allowing for a drilling capacity of up to 35 mm. The machine is built with a rigid cast-iron construction, ensuring stability during operation. Additionally, the drill head can swivel ± 45°, enabling angled drilling, while the automatic quill feed simplifies the process for larger drilling diameters. Equipped with standard features like a protective shield, LED work lamp, and a coolant system, this machine is a valuable asset for any workshop. To enhance your workshop’s capabilities with the TSB 35 column drilling machine, request a quote today. Gsdpfx Aoqa Avfebdoil

Condition: good (used), Manufacturer: INNOCENTI Type: PM 325 FT Year of construction: 2012 Specifications: Metric Metric US Standard Table length Gisdpfx Abetwllfjdel 4250 mm Table width 4250 mm Table load 130.000 V-axis feed 3000 mm B-axis rotation 360.000 ° High-speed rotation B-axis 0.16 - 34.5 Omw/min. Dimensions (estimate) length 8000 mm width 4250 mm height 2000 mm weight 62500 kg Please note: The information on this page is given in good faith and to the best of our knowledge, and where possible, has been obtained from the manufacturer, but accuracy cannot be guaranteed. Accordingly, it does not constitute a representation or contract and we recommend that you check all relevant details.

Condition: used, Year of construction: 1999, total height: 1,800 mm, total length: 2,200 mm, total width: 1,600 mm, Empty weight: 2.150 kg Price: On request - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: 39 - Drive system: Teach-in - Power [kW]: 7.5 - Centre height [mm]: 160 - Swing over bed [mm]: 320 - Distance between centres [mm]: 800 - Spindle bore [mm]: 50 - Max. spindle speed [rpm]: 4000 - Transport dimensions: 2200mm x 1600mm x 1800mm (l x w x h) - Transport weight [kg]: 2150kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Giedewfpakepfx Abdsl Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: new, The TSB 25 is a versatile Column Drilling Machine that offers impressive performance and compact dimensions, making it an ideal choice for any workshop, whether in steel construction or repair. As part of the KNUTH TSB bench drill series, this machine features a robust main spindle gearbox that provides high torque along with a wide speed range, accommodating various drilling tasks with ease. With a drilling capacity of 25 mm, a throat of 240 mm, and a spindle speed range of 125 to 2825 rpm, the TSB 25 is designed for efficiency. The swivel drill head allows for angled drilling, while the height-adjustable machine head ensures optimal usability. Additionally, standard equipment includes a base, protective shield, LED work lamp, and drill chuck, which enhance safety and convenience during operation. For those looking for a reliable and powerful Column Drilling Machine, the TSB 25 is an excellent choice. Request a quote today to learn more about this robust addition to your workshop. Gedpfxsqa Au Te Abdsil

Year of construction: 1980, condition: good (used), Make: SCHARMANN Type: TDV 80 Year: 1980 Giodpfemb Urdsx Abdsl Portable / Transportable with levelling schoes AWF Fixatoren ROD Heidenhain indexing scale with Dro Left and Right rotation in 3 indexing feed rates Power 18 kW Quick posititining fixed angle 0-90-180-270 Gr Specifications Metric US Standard Table Length 3500 mm Table Width 3500 mm Table load 80000 Rotation B-Axis 360000 ° Dimensions (Estimate) Length 6000 mm Width 3500 mm Height 1400 mm Weight 28000 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: used, Year of construction: 1999, total height: 2,000 mm, total length: 3,000 mm, total width: 1,800 mm, Empty weight: 4.000 kg Price: On request Driven tools included Barfeeder included - Year: 1999 - Documentation available: Yes - CE marking present: Yes - CE certificate present: No - Serial number: HT23372E - Drive system: CNC - Power [kW]: 15.0 - Centre height [mm]: 230 - Swing over bed [mm]: 450 - Distance between centres [mm]: 380 - Spindle bore [mm]: 59 - Min. spindle speed [rpm]: 30 - Max. spindle speed [rpm]: 5000 - Options: Bar feeder, Live tools - Transport dimensions: 3000mm x 1800mm x 2000mm (l x w x h) - Transport weight [kg]: 4000kg Giodpswqf I Usfx Abdel - Transport packages [pcs.]: 4 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2006, travel distance X-axis: 13,000 mm, travel distance Y-axis: 3,500 mm, travel distance Z-axis: 1,000 mm, spindle speed (max.): 8,000 rpm, spindle speed (min.): 6 rpm, feed rate X-axis: 30 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 30 m/min, total width: 7,000 mm, total length: 21,000 mm, total height: 5,100 mm, overall weight: 80,000 kg, mount diameter: 50 mm, The Pama Speedram 1000 is a versatile and powerful floor drilling and milling machine designed for heavy industrial applications. This machine offers advanced features and specifications that meet the highest standards of precision and efficiency. PAMA automatic head change system Godpfju Avwvsx Abdjil PAMA MG4 high speed head: 8000 rpm & 20 kW PAMA CU130-90S tool changer: up to 1300 kg tool weight Chip conveyor: 235 mm and 1200 mm outfeed height Double base plate field: 4000 x 2500 + 4000 x 2500 mm Spindle torque: 1525 Nm Floor drilling and milling machine: cast iron column, gray cast iron, hydrostatic guides, geometric compensation RAM type: 360 x 400 mm with spindle Ø150 mm Note: No cooling system, dry operation. X - axis: 13000mm Y - axis: 3500mm Z - axis: 1000mm W - axis: 700mm Speed: 6 - 3500 (8000)Rpm Power: 37kW Ram dimension: 360 x 400mm Tool holder: 50ISO/Bt/Mk Feed X - axis: 30000mm/min. Feed Y-axis: 20000mm/min. Feed Z-axis: 30000mm/min. Feed W-axis: 30000mm/min. Tool changer: 90 Control: 840D Number of controlled axes: 4 Length: 21000mm Width: 7000mm Height: 5100mm Weight: 80000kg

Condition: used, total length: 4,500 mm, total width: 1,600 mm, total height: 1,500 mm, Empty weight: 5.000 kg Price: On request - Documentation available: No - CE certificate present: No - Serial number: 0440922 - Drive system: Conventional Gjdpfsx Ryv Tjx Abdoil - Power [kW]: 18.5 - Centre height [mm]: 315 - Swing over bed [mm]: 630 - Carriage turning diameter [mm]: 400 - Distance between centres [mm]: 3000 - Bed width [mm]: 580 - Spindle bore [mm]: 82 - Min. spindle speed [rpm]: 9 - Max. spindle speed [rpm]: 1120 - Options: Three-jaw chuck, Four-jaw chuck - Transport dimensions: 4500mm x 1600mm x 1500mm (l x w x h) - Transport weight [kg]: 5000kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: excellent (used), Year of construction: 2021, turning diameter over cross slide: 840 mm, turning length: 6,000 mm, spindle bore: 105 mm, rapid traverse X-axis: 5,000 m/min, rapid traverse Y-axis: 7,000 m/min, 3 chuck SCHUNK ROTA-S Plus 500-102 3 x Steady rest fixed Revolver VDI Duplomatic Siemens 840 DSL This type of lathe is commonly used in industries like: Oil & gas (pipe threading, tool joints) Steel industry (roll turning)  Power generation (turbine shaft turning)  Heavy machinery manufacturing Gijdpfx Absx Sqaxjdjl DBC Turning Length: 6000mm Swing over bed Ø: 840mm Swing over cross slide Ø:570mm Spindle bore: 105mm Spindle power: 33kW Bed width: 450mm Tailstock spindle Ø: 220Ø Spindle taper: 5Mk Speeds / ranges: 1200Rpm Feed rate X-Axis: 5000mm/min. Feed rate Z-Axis: 7000mm/min. Workpiece load: 2500 Length: 9500mm Width: 2300mm Height: 2300mm Weight: 8600kg

Condition: excellent (used), Year of construction: 2006, turning length: 365 mm, spindle motor power: 10 W, travel distance X-axis: 160 mm, SCHUNCK 160 mm chuck with jaws Full C-Axis 360.000 Driven Live tooling Giedox R Szhepfx Abdel Part catcher Tooling package with 12 Tooling holders 3 x Live tooling AXIAL 3 x Live tooling RADIAL Collet device with inserts Cutting Hours 14.462 H Max. turning Ø: 380mm X-Axis: 160mm Z-Axis: 365mm Spindle bore: 56/42mm Speedrange: 6000Rpm Spindle power: 10kW ATC / revolver: 12 Speed live tools:4000Rpm Power live tools:5kW Chip conveyor: Yes Pinole taper: 4Mk Stroke pinole: 100mm Quill Ø: 100mm Length: 3800mm Width: 1720mm Height: 1670mm Weight: 4000kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!