Used Bosch Cc 200 for sale (491)

Condition: used, Hewema BÖSCH A 97 mitre fence suitable for every sliding table saw Nsdpfeuv Evuex Aazswl

Condition: used, power capacity 3,1 Nm Nwedpfx Asvt Egkeazjl volt 0 V ampere 3,25 A weight of the machine ca. 13 kg

Condition: good (used), BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control panel AC 230V/115V/0,4A/0,8A Item condition: Used H2R3C11_2_RD Nodpfx Aepufqhjazowl

Condition: ready for operation (used), Bosch 1070064837-105 circuit board, serial number 000880843, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwedpfxjltr Aqj Aazjl

Condition: ready for operation (used), Bosch ZS351 1070077997-103 / 1070077297-101 card, serial numbers: 002425656 + 002398732, used, in good condition, 100% functional, scope of delivery as shown in the photos. Nwsdpfx Ajltr Aujazel

Condition: ready for operation (used), Bosch amplifier module SN:C-257745 ,used, normal signs of wear, 100% functional, scope of delivery as per photos Njdpfxsntrx Dj Aazewl

Condition: new, Rexroth MSK050C-0300-NN-M1-UG1-NNN, R911309706 Servo motor AC 600V, 1000 rpm Item condition: New Technical data: 5.0 Nm 3,1 A Nodpfslkbz Tjx Aazowl n(max) 4700 min-1 KE(eff) 109,0 V / 1000 min-1 Km 1,77 Nm/A U(max) AC 600 V H1R6A13K5-1_HS 7 kg More servo motors - new and used - you will find in our store! International shipping costs on request!

Condition: ready for operation (used), Bosch SG-y1.016.060-00.010 AC servo motor SN:N445, used, normal signs of use, 100% functional, scope of delivery as per photos Njdpfx Aetu R Idjazswl

Condition: ready for operation (used), Bosch SE-B2.010.060-00.000 Brushless servo motor 104-914 588 SN: 000176, used, good condition, 100% functional, scope of delivery as per photos Nwedouzrhhspfx Aazel

Condition: ready for operation (used), Bosch ASM 10-TD servomodule SN:001299180, used, normal signs of wear, 100% functional, scope of delivery as per photos. Nwodpfx Aox Eqw Dsazol

Condition: ready for operation (used), Bosch DM 015K 9101-D drive module No.: 1070084664-114 SN: Input: 670V, 6A DC Output: 3-phase, 400V - 5.8A - 800Hz - 8kHz, used, in good condition, 100% functional, scope of delivery as per the photos. Nwsdpfx Aex Eqxnjazol

Condition: ready for operation (used), Bosch SPM 50 spindle module SN:372860, used, normal signs of wear, 100% functional, delivery as shown in the photos. Nwodox Eqzcopfx Aazsl

Condition: ready for operation (used), Bosch VM 60-150 supply module SN:287019, used, normal signs of wear, 100% functional, delivery as shown in the photos. Njdpjx Eqzvjfx Aazowl

Condition: new, Bosch VM 60-T supply module 1070077371-105 SN:002157251, unused, 100% functional, delivery as per photos Nwsdsx Eq Ayepfx Aazjl

Condition: used, functionality: fully functional, HYDRAULIC VALVE Njdpfxjxzfbmo Aazowl All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Nsdoxzfngepfx Aazswl

Condition: used, functionality: fully functional, HYDRAULIC VALVE Nsdpfxexzfn Hs Aazjwl All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, HYDRAULIC VALVE Njdpexzfxrofx Aazowl All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, HYDRAULIC VALVE Nwsdpfxoxzf Tce Aazel All our items have been inspected by the technical department.

Condition: used, functionality: fully functional, HYDRAULIC VALVE All our items have been inspected by the technical department. Nsdpfx Asxzgkvsazswl

Condition: new, Bosch Rexroth Control Card CSB01.1C-PB-ENS-EN1-NN-S-NN-FW Manufacturer: Bosch Rexroth AG Type: CSB01.1C-PB-ENS-EN1-NN-S-NN-FW Material Number: 1012904612 Series: CSB01 Interface: PROFIBUS DP Version: Power Supply and Control Module Condition: New, in original packaging (OVP) Njdpfx Aeyxwiysazewl Quantity: 3 units

Condition: used, Year of construction: 1997, Automatic in-line filling machine: Model: Bosch FLK 6040 CIP Year : 1997 Power: 5 kW Speed: 30-40 bottles/min Conveyor width: 8 cm Njdpfx Aaeyfw H Rjzewl Transporting bottles from right to left Linear dosing system with 6 stainless steel pistons Filling point: 6 heads Plunger filling head: yes Volume: from 15 to 500 ml Pistons replaced in 2012. Filling accuracy: +/- 0.5% depending on the product Product: liquid/semi-liquid for bottles, flasks, cans Formats : ⌀ 41 to 115 mm Hauteur max : 320 mm Minimum internal diameter of opening: 5 mm Closed hopper Clean-in-place (CIP) module Maximum temperature: 60°C Dimension : 400 x 150 x 320 cm Weight : 2100 kg Several formats and spare parts available.   Capping/screwing machine: Model : VLM 7010 Year : 1997 Power : 10 kW Transporting bottles by conveyor belt. Direction from right to left. Screw, pressure or push-fit sealing system Capacity : 60 units / min Bottle dimensions: Width: 16 to 90 mm Length: 16 to 135 mm Height: 40 to 280 mm Diameter: 16 to 100 mm Cap dimensions: screw cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length: 16 to 60 mm pressure cap: Diameter : 16 à 60 mm Height : 13 à 50 mm Width: 16 to 60 mm Length : 16 à 70 mm Machine dimensions: 400 x 130 x 200 cm (+ electrical cabinet 160 x 50 x 170 cm) Weight : 2050 kg  

Condition: new, Bosch / REXROTH regenerative power supply unit: Type - HMV01.1R - W0065 Nodpfxjyu Rz Tj Aazewl

Condition: good (used), Bosch Diffusion Welding Machine Njdpfxeg Icfpo Aazewl The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Condition: used, Electric dual-screw unit with automatic feed and pneumatic double stroke BÖLLHOFF Type UVS-100-2-R-E The Böllhoff Uniquick Vario UVS-100-2-R-E dual-screw unit has a pneumatic double stroke via Festo valves and cylinders. In addition, various monitoring systems are installed for complete automation. Technical data: Torque of electric screwdriver: 0.6 Nm Torque of gearbox: max. 10 Nm Speed: max. 20,000 rpm Rated voltage: 3~ 0-230 VAC Current consumption: max. 7 A (per screwdriver) Pneumatic long-stroke cylinder: 80 mm Pneumatic short-stroke cylinder: 20 mm Pneumatic total stroke: 100 mm Screwdriver spring stroke: 20 mm Distance between the two screwdriving tools: 73 mm - equipped with a TORX bit T27 or TP27 (presumably for M6 screws) - a Bosch Rexroth LT303 power module is required to operate the screwdriver. (Power module not included) Screwdriver 1 and 2 each consist of the following components: Rexroth Type Servo motor Rexroth Type 0 Planetary gearbox Rexroth Type 0 Encoder Rexroth Type 0 Straight gear Component details: Electric screwdriver unit Rexroth Servo motor Rexroth Type: EC302 SZ3 Material number: 0 Torque: 0.6 Nm Peak torque: 0.7 Nm Speed: max. 20,000 rpm Current consumption: max. 7 A Rated voltage: 3~ 0-230 VAC Weight: 0.8 kg Gearbox unit Rexroth Type: 3GE27 SZ3 Material No.: 0 Efficiency: 90% Gear ratio: i=18.9 Torque: max. 10 Nm Weight: 0.4 kg Installation length 65.5 mm Encoder Rexroth Type: 2DMC012 SZ2 Material No.: 0 Nodpfehxvu Ejx Aazowl Rated torque: 12 Nm Gear ratio: 1 Efficiency: 1 Weight: 0.55 kg Installation length: 118.5 mm Straight gear Rexroth Type: 2GA82 SZ2 1/4"SQ Material No.: 0 Spring travel: 20 mm Spring force: 16 - 34 N Tool holder: 1/4" square Maximum torque: 10 Nm Gear ratio: 1 Weight: 0.2 kg Installation length: 90 mm A motor connection cable of 7m is included. Overall dimensions W x H x D: approx. 180 x 920 x 300 mm Total weight: approx. 20 kg good condition