Used Bosch Bar Line for sale (493)

Condition: like new (used), Bosch. U-MB 1000Kg/h Loos 10Bar. Isdpsu I Ru Hsfx Afhoig

Condition: excellent (used), Year of construction: 2017, 1 used steam boiler Manufacturer: Bosch Type: U-MB 2020 Capacity: 2,000 kg/h Permissible operating pressure: 13.0 bar Iedpezltalofx Afhoig Increased test pressure: 24.1 bar Maximum temperature: 195°C Total volume: 2,065 l Year of manufacture: 01/2017 CE marking: CE 0036 Equipped with a Weishaupt gas burner, type WM-G20/3-A, 300-2,000 kW, ZM-LN design, 15-500 mbar, gas control system, separate control cabinet, Loos Boiler Control LBC boiler control system, feed water pump, Eco Type 1, capacity 89 kW, volume 41 liters, temperature 238°C, permissible operating pressure 31 bar, test overpressure 56 bar, and the existing coarse and fine fittings.

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, machine/vehicle number: 140563, power: 1,300 kW (1,767.51 HP), overall weight: 2,600 kg, total width: 1,424 mm, total length: 3,787 mm, total height: 2,402 mm, pressure: 6 bar, heating capacity: 1,300 kW (1,767.51 HP), fuel: domestic gas H, operating pressure: 6 bar, Equipment: hot water, Bosch Unimat UT-L 10 industrial low-pressure hot-water boiler, manufactured in April 2023. Technical data: - Manufacturer: Bosch Industriekessel Austria GmbH - Model: Unimat UT-L 10 - Year of manufacture: 2023 - Serial number: 140563 - Rated thermal capacity including ECO: 1,300 kW - Maximum allowable pressure: 6 bar - Hydraulic test pressure: 9.6 bar - Allowable temperature range: 0–110 °C Ijdpezp Rmqefx Afheig - Total boiler volume: 1,370 litres - Approximate dimensions: 3,786 × 1,424 × 2,402 mm - Approximate net boiler weight: 2,600 kg - Heating medium: low-pressure hot water - Design: three-pass flame-tube/smoke-tube boiler - Flue/appliance classification: EN 1749, B23 - CE marking: CE 0085 - Manufactured in Austria - Type plate available The stated dimensions and weight are manufacturer reference values for the UT-L 10 boiler body. Actual dimensions and transport weight may vary depending on the installed burner, economiser, fittings and control equipment. Fuel type and electrical connection data must be taken from the installed burner and control-cabinet nameplates. The exact scope of supply, operating condition and included documentation should be confirmed before purchase. Sale subject to prior sale and verification of the technical information. Included equipment, as shown in the photographs: - Natural-gas regulating and supply line - Gas pressure regulator - Gas meter - Pressure gauge - Motorised Bosch valve actuator - Butterfly shut-off/control valves - Associated pipe sections, flanges, gaskets and mounting components The components are supplied dismantled. Completeness and suitability for the buyer’s installation must be verified before commissioning.

Condition: excellent (used), Standard steam boiler 2000 kg/h 22 Bar (2166) oil or gas burner Iodpfjxqr E Dsx Afhsig

Condition: excellent (used), ///// PRICE LISTED FOR 1 UNIT ///// For sale: Professional Bosch Rexroth industrial screwdrivers designed for use in production lines and assembly workstations. The devices are characterized by high precision, durability, and the ability for continuous operation in industrial environments (automotive, series production). The items are used. They show normal signs of use but are in good technical condition. ⚙️ Available models (choose one) 🔹 Rexroth ESA075G-G (0 608 841 230) Torque: 75 Nm Speed: 530 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESV073-G (0 608 841 247) Torque: 73 Nm Speed: 900 rpm Year of manufacture: 2020 Country of manufacture: Germany 🔹 Rexroth ESA150S-G (0 608 841 212) Torque: 150 Nm Speed: 380 rpm Year of manufacture: 2021 Country of manufacture: Germany 🔹 Rexroth ESA013G-G (0 608 841 225) Torque: 13 Nm Speed: 1000 rpm Year of manufacture: 2024 Country of manufacture: Slovenia 🔌 Common specifications Power supply: 3~230V Frequency: 0–250 Hz Power: 200W Manufacturer: Bosch Rexroth 📦 Scope of supply ✔️ 1x screwdriver (selected model) ✔️ Head (as per photo – straight or angled) Iisdpoyzkhusfx Afhsg 📊 Condition Used – normal signs of wear. Equipment in good technical condition. 🛠️ Application assembly lines automotive industry series production precision tightening

Condition: excellent (used), Year of construction: 2016, functionality: fully functional, 1 used feedwater tank ----- Thermal feedwater degassing system insulated, cylindrical, with degassing dome, sludge collection tank Iiodpfxjzz I N Hs Afhsg with base frame and platform Type: FT 1.5 Manufacturer: BOSCH Operating pressure max.: 0.5 bar Test pressure: 2.0 bar Temperature max.: 110°C Water content when full: 1,500 l Year of manufacture: 12/2016

Condition: used, BOSCH proportional valve NG16, NG6- removed from K-Tec 350 3F - removed from running machine - fully functionalmanufacturer: BOSCH  type: NG16, NG6 manufacturer no.:   spare part no.: 1type code: 4WRLE 16 X200M-3X/G24K0/A1WG02M-776 The number before the first slash describes the appliance series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Iijdpfst Sbfvjx Afhog Dition: gebraucht

Condition: good (used), Year of construction: 2016, Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNN 3-Phase Synchronous PM-Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used  Complete plant closure, large selection of storage platforms, pallet racks, shelf racks, paternosters. High-quality industrial machines, lathes, grinding machines, hand machines. Ijdpfshufclsx Afhsig Financing through our bank is also possible. komplett-konzept.leasingo.de Further articles - new and used - you will find in our shop! International shipping costs on request!

Condition: used, Hydraulic power unit, Bosch Rexroth complete industrial hydraulic power pack with 15 kW Siemens motor, HYDAC oil cooler and WOERNER control system, Used Machine MAIN MOTOR AND PUMPS: Main drive motor: SIEMENS 15 kW (3~ Mot. 1LA7166-4AA61, 400/690 V, 1460 rpm, IP55, 99 kg) Rexroth main pump: A10VSO 28 DFLR/31R-PPA12N00 (250 bar, Vg = 28 cm³/rev) Rexroth 2nd pump: PGH5-21/080RE11VE4 (80 cm³/rev, internal gear pump) Rexroth 3rd pump: PGH2-22/006RR07VU2 COOLING AND FILTRATION: Oil cooler unit: HYDAC SA Cooling Systems (SCA 3L/40/2.0/M/A/1, max. 6 bar) Cooling circuit pump: HYDAC SYSTEM KFZP-3+4/3.0/P/90/40 (G 1 1/4") Cooling fan motor: A.O. SMITH 5.5 kW (400 V, IP55) Filter housing: REXROTH pressure filter housing (25 bar, 16.7 litres) CONTROL SYSTEM AND TANK: Temperature controller and display: WOERNER KTR-B/3/V300/T5/T5/TA (IP65) Hydraulic tank: Robust steel hydraulic oil tank with oil level indicator and inspection/cleaning opening. OVERALL DIMENSIONS: Width: 1700 mm Iiedpfjzxfnzjx Afheg Depth: 1300 mm Height: 1650 mm

Condition: used, Working length: 4060mm The traveling trolley size: 650x1700mm Isdpfxsyyhqds Afhoig

Condition: ready for operation (used), functionality: fully functional, For sale is a special-purpose machine—a complete production line for manufacturing heating elements. The production line was designed and built by Bosch itself. The heating elements are suitable for use in instantaneous water heaters. You can see an image of these elements in the second picture of the gallery. The production line also includes a testing station. According to our checks, all required documentation is available. Transport and loading can be organized throughout Europe for an additional charge upon request. Prices are subject to VAT. Inspection is possible by appointment. Please contact us—our team looks forward to assisting you. Machinery Buying / Selling PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINERY, MACHINE TOOLS, ETC. Iiodpfx Afozvfiyshjg Are you looking for a high-quality yet cost-effective machine for your production? Or are you looking to sell your equipment? For more information or contact options, please reach us via the contact form.

Condition: good (used), functionality: fully functional, A good used 6 station Volumetric cup filler which has been fitted with a variable speed indexing drive and PLC controls - cup volume of 3Litre max in single drop and system capability of multidump set on HMI controls This machine is ideal for filling any free flowing granular product or seeds/pulses - complete on floor stand and supplied with a top sub hopper. Iisdpfx Aezzkr Dofhog Please request more pictures and videos which can be sent on Whats App Ready to ship worldwide

Condition: used, BOSCH pilot operated proportional valve - removed from running machine Iisdpfxerr Egde Afhjg - removed from Arburg 420 C 1 fully functional manufacturer: BOSCH manufacturer no.: PROP-WEGEVENTIL), PROP-WEGEVENTIL), control solenoid RM45) type code: 4WRL10Q5-85M-3X/G24TZ4/M-754, 4WRPH6C3B04P-2X/G24Z4/M, type code: The digit before the first slash describes the model series. For this reason, this digit of the type code on your old spare part may differ. If you have any questions, please do not hesitate to contact us. Dition: gebraucht

Condition: good (used), Bosch Diffusion Welding Machine The system described here was designed for the following use: Diffusion welding machine for connecting the armature lead to the commutator of a starter armature using diffusion welding. Diffusion welding unit (also known as polymer diffusion welding unit, diffusion welding, copper soft welding unit, copper strip welding unit), consisting of a main machine and control system, PLC control, touchscreen operation. Process Description The workpiece carrier enters the station and is lifted. The alignment gripper picks up the armature from the workpiece carrier and aligns it according to the welding position. The loading gripper picks up the armature and places it in the welding chuck. The welding chuck moves with the armature into the welding position. The contacting unit and welding cylinder move together, and the first weld is performed. This process is repeated until the armature is completely welded. The welding chuck moves with the anchor into the transfer position, and the unloading gripper picks up the anchor and places it on the raised workpiece carrier. The workpiece carrier is lowered. Workpiece carriers with OK anchors continue on the conveyor system; NIO anchors are sent to the removal conveyor. At a welding machine, the OK anchors are marked with a color on the end face of the commutators using a stamping station. This allows for identification during the final inspection of which welding machine produced the anchor. ... Technical Data: Diffusion Welding Machine Energy Data: Frequency: 50 Hz Rated Power: approx. 11 kW Operating Voltage: 400 V / 3P Control Voltage: 24 V Rated Current: 20 A Fuse: 35 A Water: Inlet pressure 4 bar, 15-23 °C, approx. 25 l/min Compressed Air, oil-free: min. 5 bar Temperature: 1000 °C at the tungsten electrodes Machine Dimensions without Control Cabinet Depth: 1800 mm Width: 3100 mm Height: 2700 mm Iiodpfx Asg Icfpefhsg Weight: 3000 kg Year of Manufacture: 2016 Financing through our bank is also possible. komplett-konzept.leasingo.de Further items – new and used – can be found in our shop! International shipping costs on request!

Year of construction: 1999, condition: good (used), The machine has been produced in the late 1990's. Very little usage (it has been stored in a warehouse). Located in Tata, Hungary. No warranty. 1800 bar Cr pump with injector Test bench with 15 kW power, 12 measuring points, flow-through water cooling KMA flow meter system with 2 flow meters. The bench has a separate lubricating oil pump with lubricating oil supply Speed range from 0 to 4000 f/min. Equipment: Iijdpfxstw S Awe Afhog - Bosch Cr pump control test in safety, protective cage - Bosch magnet coil injector testing, coding - optional testing of piezo injectors - option to repair and test CP2 pumps Testing and coding is performed using Bosch factory software and database. Bosch Esi subscription required The test bench is in good condition and has been operated with regular calibration. For sale due to site closure.

Condition: used, Hydraulic Pump, Pump, Rexroth A2V 1000, Used Machine Manufacturer: Bosch Rexroth Type: A2V 1000 Overall dimensions: Width: 800 mm Depth: 850 mm Height: 730 mm Weight: 886 kg Design: Bent-axis, variable displacement type Nominal speed: 740 min⁻¹ Iisdpfjy Nnmwsx Afheg Operating pressure: Up to 350–400 bar Country of origin: Germany Designed for long service life under continuous heavy-duty operation. Suitable for both open-loop and closed-loop hydraulic systems.

Condition: good (used), Bosch Turbo Scara SR 800EC Robot + IQ 150 Controller + PHG 2000 Handheld Control Unit Manufacturer: Bosch Order No. 3842506428 Serial No. 764840020 Maximum load on gripper flange: 100 N Iisdpfohbmvpjx Afhjg 3rd axis stroke: 320 mm Pneumatic pressure 4-8 bar Weight: 100 kg Swivel range: see diagram Item condition: Used In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. A wealth of workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are available. A total of 24,000 m² of production space is being dismantled and sold. Please also note our other offers. Payment is due within 7 business days of purchase. Financing through our bank is also possible. komplett-konzept.leasingo.de Find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Bosch Scara SR 800 Swivel Arm Robot Manufacturer: Bosch Order no. 384291811 Serial no.54400094 Maximum load on gripper flange: 5 kg Stroke 3rd axis 480 mm Pn. pressure 4-8 bar Weight: 100 kg   Swivel range see diagram, Mounted on aluminium profile base frame. Item condition used The robots were all in stock at a large automotive supplier as a replacement machine, so they are in a very good condition. they are in a very good condition.     In addition to approx. 50 paternosters, there are countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves are abundantly available. A total of 24,000 m² of production space is being dismantled and sold off. Please also note our other offers'. After purchase the amount is due within 7 working days. Further articles - new and used - can be found in our shop! Iiedshtyznepfx Afhsg International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR8 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch Maximum pressure 8 bar Maximum load 8 kg Robot weight 51 kg + Controller consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S Swivel range / Technical data see image Since multiple copies of this item are available and the robots use different tools, these are only sample images and may vary. Item condition: Used (Subject to changes and errors in the technical data, information is subject to change!) In addition to approximately 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts, and shelving are plentiful. A total of 24,000 m² of production space is being demolished and sold. Please also check out our other offers. After purchase, the amount is due within 7 business days. Iijdpehbhyusfx Afhog You can find more items – new and used – in our shop! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR8 Robot + Controller IQ200 Manufacturer: Bosch Serial-No. 3842999836 Serial No.3810198 stroke*quill 400*25 PN. pressure max 8 bar Load max 8 kg Weight 51 kg + control IQ 200 (Changes and errors in technical data, specifications are reserved!) Ijdpshbmwmefx Afheig swivel range see picture Item condition used In addition to approx. 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves are abundantly available A total of 24,000 m² of production area is being dismantled and sold off Please also note our other offers.' After purchase the amount is due within 7 working days. More items - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR8 Swivel Arm Robot Manufacturer: Bosch Serial-No. 3842999836 Serial No.3810333 Iedpfx Afsg D Tu Iehjig Stroke*Quill 400*25 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg Swivel range see picture Mounted on aluminium profile base frame. Item condition used The robots were all in the warehouse of a large automotive supplier as a replacement machine, so they are in a very good condition. they are in a very good condition. In addition to approx. 50 paternosters, there are countless other machines such as presses, robots, ovens, industrial vacuum cleaners etc. available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves are abundantly available. A total of 24,000 m² of production space is being dismantled and sold off. Please also note our other offers'. After purchase the amount is due within 7 working days. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR 800 Swivel Arm Robot Manufacturer: Bosch Order no. 3842291811 Serial no.469801012 Maximum load on gripper flange: 100 N Stroke 3rd axis 320 mm Pn. pressure 4-8 bar Weight: 100 kg Swivel range Mounted on aluminium profile base frame. Item condition used The robots were all in the warehouse of a large automotive supplier as a replacement machine, so they are in a very good condition. they are in a very good condition.  Isdpfxeg A N Tde Afhjig In addition to approx. 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves are abundantly available. A total of 24,000 m² of production space is being dismantled and sold off. Please also note our other offers'. After purchase the amount is due within 7 working days. You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR8 Swivel Arm Robot Manufacturer: Bosch Order no. 3842999836 Serial-No.3810102 Stroke*Quill 400*25 PN. pressure max. 8 bar Load max 8 kg Weight 51 kg Swivel range see picture Mounted on aluminium profile base frame. Item condition used The robots were all in the warehouse of a large automotive supplier as a replacement machine, so they are in a very good condition. they are in a very good condition.  In addition to approx. 50 paternosters, there are countless other machines such as presses, robots, ovens, industrial vacuum cleaners etc. available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves are abundantly available. A total of 24,000 m² of production space is being dismantled and sold off. Please also note our other offers'. After purchase the amount is due within 7 working days. Iedpfjg A N Tlsx Afhsig You can find more items - new and used - in our shop! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR4 Robot + Controller MA4/200-7301-M + RH04.0S Manufacturer: Bosch Type: turbo scara SR4 PN. pressure max. 8 bar load max. 5 kg weight robot 40 kg Ijdpfshcblgjx Afhoig + Control system consisting of the following components: Rexroth / MA4/200-7301-M / Robot Controller Module Rexroth RH04.0S swivel range / technical data follow Article condition used Since the article is available several times and the robots carry different working tools these are only sample pictures and can deviate. (Changes and errors in the technical data, data are reserved!) In addition to approx. 50 paternosters are countless other machines such as presses, robots, ovens, industrial vacuum cleaners, etc. available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves are abundantly available. A total of 24,000 m² of production area is being dismantled and sold off Please also note our other offers.' After purchase the amount is due within 7 working days. More items - new and used - you will find in our store! International shipping costs on request!

Condition: good (used), Bosch Turbo Scara SR 800EC Swivel Arm Robot Manufacturer: Bosch Order no. 841551021 Serial no. 671840015 Maximum load on gripper flange: 100 N Stroke 3rd axis 480 mm Pn. pressure 4-8 bar Weight: 100 kg Swivel range see diagram Mounted on aluminium profile base frame. Item condition used The robots were all in stock at SEG as a replacement machine, so they are in a very good condition. they are in a very good condition. In addition to approx. 50 paternosters, countless other machines such as presses, robots, ovens, industrial vacuum cleaners etc. are available. Workshop equipment, workbenches, workshop trolleys, tools, forklifts and shelves are abundantly available. A total of 24,000 m² of production space is being dismantled and sold off. Please also note our other offers'. After purchase the amount is due within 7 working days. Isdpfsg A N Twjx Afhsig Further items - new and used - can be found in our shop! International shipping costs on request!