Used Bottling Plant for sale (4,483)

Year of construction: 2022, operating hours: 6 h, condition: like new (used), functionality: fully functional, 3 pieces of nearly new PROLAIN dryers, each approx. 170 m³. Further technical data available on request. Sale on behalf of customer. Fjdpfx Aaoxcifrsnogi

Condition: used, Year of construction: 2014, Overview  This complete isobaric filling line was produced in 2014 by the Italian manufacturer Eurostar and is located in Mexico. The line consists of a triblock (rinser, filler and capper), self-adhesive labeler and conveyor belts. It is being sold because a new line with a higher capacity has been purchased. It has already been dismantled. Technical Details  - Capacity: Max 6,000 b/h - Formats: - 0.210L, - 0.355L, - 0.500L glass bottles - 26mm metal crown caps - Dimensions: - Width: 5,300 mm - Depth: 2,630 mm - Height: 2,860 mm Fgodpfjvm U Dlox Aansi - Weight: 8,000 kg - POWER SUPPLY: - Main: 460V – 60Hz – 3F+N+T - Auxiliary: 24V DC - Machine main motor: 4 kW - Installed power: 9 kW Scope of Delivery  - Triblock (rinser, filler, and capper) - Selfadhesive Labeller with 2 stations - Conveyors

Condition: used, Year of construction: 2010, Overview   This ARCADE GEL 6 bottle washer was built in 2010 by the German manufacturer GM Gera. The machine is still in operation and can be inspected in person at any time. The ARCADE GEL 6 is fully functional and must be replaced due to an increase in performance.   Technical details   Nominal output: 33,000 bph   Control range: 13,200 - 36,300 bph   Chain pitch: 169 mm   Cell pitch: 110 mm   Bottle cells per row: 30 pieces   Total bottle cells: 7,860 pieces   Bottle cells, loaded: 7,680 pieces   Consumption  Compressed air: 1m³   Steam (operation): 489 kg/ h   Steam (heating): 4,430 kg/ h   Electrical power: 48.4 kW   Water: 7.35 m³/ h   Bath volume   Pre-soak: 2,263 l   Pre-caustic: 7,240 l   Caustic 1: 31,755 l   Caustic 2: 350 l   Hot water 1: 350 l  Hot water 2: 350 l   Cold water: 350 l  Fgjdpfx Aajt Ul Exensi

Condition: used, For concrete paving stones Fsdpfx Ajz S Eyceanjgi In the 500-liter class (which corresponds to a maximum batch capacity of approximately 655 to 800 kg), Eirich primarily offers two established model series that are very frequently used for this application or traded on the used equipment market. Please note that these are very rare and can be sold quickly, therefore no reservations are accepted, and we reserve the right to sell the equipment at any time. You can send us a WhatsApp message to: The description serves only for the general identification of the system and does not constitute a guarantee in the legal sense of the term. The seller assumes no liability for typing and data transmission errors. The listed data may need to be verified separately. Subject to changes, input errors, errors and prior sale. We look forward to hearing from you.

Year of construction: 2022, operating hours: 3,863 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 006682, On behalf of our customer, we hereby offer a virtually new OI sorting. This installation can be tested in operation at the customer. The machines consist of; Sorting oi: 0050 Bunker belt with dosing drum BDF1200/2000*10000 0060 Ascending belt to screen HBT1200/1600*14000 0070 Cardboard screen 1640*7000 Platform Cage ladder Fgodpjwq D Dnofx Aanji 0080 Adjustments to existing paper chain belt 0090 Switch cabinet included Operating hours only 3863 In consultation with the customer and Bollegraaf, a guarantee is possible under certain conditions See the attached PDF for a precise technical description per machine

Condition: used, Year of construction: 2006, Semi-automatic PET bottle machine – ZENTRONIK ZR-7 1. Heating oven for PET preform heating Fodownzdaepfx Aanogi 2. Semi-automatic PET bottle production machine Mould: double-cavity for 5.0L bottles (48 mm cap) Output: approx. 800 bottles/hour Technical condition: used, operational

Condition: used, Automatic bottle capping machine for plastic caps. The machine features stepless speed and output adjustment. Fjdpfxsxz Ehmj Aanogi Number of capping heads: 8 pcs Capacity: 6,000 bph Total power: 4.0 kW Weight: 1,500 kg Used machine

Condition: ready for operation (used), Year of construction: 2012, Professional automatic machine for rinsing glass and plastic bottles using filtered water. Manufacturer: WAB s.r.l. (Italy) Model: ADV R00 R1 8-40-110-110 Number of grippers: 40 pcs Output: approx. 8,000 bph Stroke: 110 mm Control: Siemens PLC Year of manufacture: 2012 Fsdpfxsyxxays Aanegi Technical condition: Used machine, regularly serviced, fully operational at the time production was stopped.

Year of construction: 2020, condition: used, Offered for sale is an industrial bottle washing machine with a multi-stage cleaning system. Rated capacity: 2000bottles/h. Bottle volume: 0.2-1.0liters. Bottle diameter: 58-88mm. Bottle height: 140-330mm. Total bottle rows: 61. Bottles in the machine: 770 units. Cycle time: 19.3846sec. Total transit time: 19.71min. Caustic contact time: 11.95min. Max. water consumption: 1.0m³/h. Equipped with bottle infeed and discharge, weak caustic bath, multi-stage spray systems for caustic solution, hot, warm and fresh water, and label discharge. Empty weight: approx. 6500kg. Overall dimensions X/Y/Z: approx. 5050mm/3139mm/2450mm. Height including spindles: 2600mm. Inspection possible by arrangement. Fedo Ad Nqhepfx Aanogi

Condition: used, Year of construction: 2007, Overview This KHS Innoclean single-end bottle washer for returnable glass bottles was built in 2007. It cleans and de-labels empty bottles before filling: bottles are pushed into carrier-basket cells, run on heavy roller chains through a pre-soak, two pre-warming baths, the main caustic soak with under- and over-caustic label flushing, and three water spray zones, then handed back onto the bottle conveyor at discharge. Nineteen bottles run across the machine width in 4,275 cells; output range and design output are given below under Technical data. At design output, total dwell time is 18.7 minutes, including 10.8 minutes of caustic contact. KHS modernised the drive and operator station in 2022: Triple-i-Drive and a capacitive multi-touch panel with RFID login, detailed under Equipment. A KHS manual supplement dated November 2022 covers the upgrade. Technical data - Manufacturer: KHS - Model: Innoclean - Machine type: single-end bottle washer (soaker) - Year of manufacture: 2007 - Drive and control modernisation by KHS: 2022 - Output range: 2,800 - 14,500 bottles/h - Design output: 13,200 bottles/h, 0.75 l glass bottle, 0.68 kg - Bottles across machine width: 19 - Carrier baskets: 225, of which 217 loaded - Cell pitch: 105 mm; carrier chain pitch 169 mm - Bottle diameter: 54.0 - 89.5 mm (plastic cells) - Bottle height: 180 - 340 mm - Bath volumes: main caustic soak 23.0 m³, pre-soaks 0.9 and 1.1 m³, after-caustic 0.3 m³, spray zones 0.4 m³ each - Power supply: 400 V, 50 Hz, TN-S, 113 A nominal, 125 A slow fuse; control voltage 24 V DC - Water consumption: 3.56 m³/h, 270 ml per bottle - Compressed air: 1.0 Nm³/h at 3 bar - Overall dimensions: 11,040 x 4,470 x H 3,438 mm (incl. infeed table) - Conveyor heights: infeed 720 mm, discharge 1,690 mm - Weight approx.: 33.5 t machine, 62.6 t operating Fgedpfszzz Ivox Aanoi - Largest transport segment: 4,410 x 4,100 x 3,370 mm, approx. 7.3 t - Enclosure type 12; CE marked Equipment - Triple-i-Drive: worm gearboxes with individual geared motors, each on its own servo inverter with synchronisation and individual overload protection - Servo-driven infeed and discharge segments with brake motors - Capacitive multi-touch operator panel, graphical interface with component views, RFID card reader - Gearbox monitoring with torque protection - Two pre-warming and main caustic immersion baths, with under- and over-caustic label flushing and bottle base spray-off - Automatic label discharge over a full-width sieve belt with brush take-off - Automatic level control and caustic dosing; sieve tub filtration and after-caustic circuit for long caustic service life - Three water spray zones, internal and external, with rotating fresh-water spray - Vapour extraction and plate heat exchanger - Siemens SIMOTION D and SINAMICS drive cabinet - Original KHS documentation: operating manual, 2022 supplement, spare parts list Condition Used, technically complete. Still installed and under power at its production site; photographs and video show it running. Availability Immediately. The machine will be dismantled and relocated to Germany. Viewing by arrangement; dismantling, loading and transport can be quoted on request.

Condition: new, functionality: fully functional, Copper Granulators Copper Granulators All prices are net prices. - GM-S03: 4,200 Euros - GM-S05: 5,050 Euros - GM-S08: 7,700 Euros - GM-S15: 11,300 Euros Compact and powerful cable recycling machines for the efficient separation of copper and plastic. Capacity, depending on the model: 30–150 kg/h at 4.28–8.5 kW. Ideal for small to medium-sized recycling operations. Image 1 – Cable recycling plants Professional cable recycling machine GM-T500 High-quality system for the efficient processing and separation of cable material. Suitable for various types of cables and industrial applications. GM-T500: Copper wire granulator, up to approximately 300–400 kg/h, 34.15 kW Price: 55,640 Euros net Granulators GM-B200 to GM-D600 Robust machines for the professional shredding and processing of cables and metal materials. Various models with 1.5–11 kW motor power and different throughput and performance sizes. Ideal for recycling operations, cable processing, and industrial applications. Available models as per overview: All prices are net prices. • GM-B200 – 1.5 kW, 400 Nm 3,000 Euros • GM-B300 – 3 kW, 1,628 Nm 4,840 Euros • GM-B400 – 4 kW, 2,919 Nm 6,780 Euros • GM-B500 – 7.5 kW, 4,574 Nm 8,940 Euros • GM-B600 – 11 kW, 8,500 Nm 12,860 Euros • GM-D400 – 2 × 4 kW, 5,800 Nm 8,900 Euros • GM-D500 – 2 × 7.5 kW, 9,148 Nm 12,200 Euros • GM-D600 – 2 × 11 kW, 25,000 Nm Fgodpoz Eil Uofx Aanji 16,520 Euros

Condition: used, Year of construction: 2016, operating hours: 30,000 h, functionality: fully functional, machine/vehicle number: 2212725, type of input current: three-phase, power: 1,999 kW (2,717.88 HP), input voltage: 400 V, control cabinet width: 800 mm, control cabinet length: 3,000 mm, control cabinet height: 2,400 mm, rotational speed (min.): 1,500 rpm, rotational speed (max.): 1,500 rpm, total height: 3,200 mm, total length: 16,000 mm, total width: 3,200 mm, fuel: domestic gas H, overall weight: 45,000 kg, type of cooling: water, nominal power: 1,999 kW (2,717.88 HP), nominal power (apparent): 2,000 kVA, input frequency: 50 Hz, input current: 250 A, Equipment: documentation/manual, The CHP unit is used in the horticultural operation to supply electricity. It can operate in parallel with the grid or in island mode. It is maintained by the manufacturer under a full-service contract. It is in good condition and fully functional. The container is spacious and very comfortable for service work. The generator is connected to the circuit breaker via a copper busbar system, ensuring high quality. The container temperature is controlled automatically via electric sunshades. The switch room is heated and air-conditioned. An EMI box is installed for continuous NOx measurement. A 15-meter chimney is located on the roof. A ladder for exhaust gas measurement is included. The unit is sold “as is” for pickup at the premises. The sale is due to a change to wind power generation. The service contract, valid up to 60,000 operating hours, can be taken over if desired and possible. It is a perfectly designed container, extremely spacious and solidly built! It is intended to remain in operation until December 1, 2026. If necessary, it can also be dismantled immediately. We would be happy to arrange a viewing and demonstrate its operation. Fedpfxoz D Ihfj Aanogi

Year of construction: 2021, condition: used, machine/vehicle number: AT95, Used Posimat bottle unscrambler - year 2021Technical Specifications & Performance DataThis Bottle Unscrambler POSIFLEX-A-20 is a proven solution for high-efficiency bottle handling at the start of a used bottling line. Manufactured by Posimat, it is engineered to orient and feed empty bottles reliably into downstream industrial packaging equipment, supporting beverage production environments that demand consistent uptime and gentle container treatment.Manufacturer: PosimatModel/Type: POSIFLEX-A-20Manufacturing year: 2021Production speed: up to 100 bpm (bottles per minute)Application: Automatic bottle unscrambling and infeed to conveyorsCompliance: CE marked; designed according to 2006/42/CE (Machinery), 2014/30/CE (EMC), 2014/35/CE (Low Voltage)Container handling: Optimized for bottle feeding in beverage production linesUse case: Ideal for second hand installations and upgrades of existing used bottling line layoutsAdvanced Automation & Control SystemsThe POSIFLEX-A-20 is built for automated operation with coordinated control of the hopper, orienting system, and discharge. Operators benefit from intuitive control interfaces and precise speed regulation to match downstream equipment, improving changeover efficiency and minimizing stops.Integrated control panel for speed and function managementAutomated bottle orientation with high repeatabilitySensor-based jam detection and bottle flow monitoringRecipe-friendly setup for rapid format adjustmentDesigned for continuous-duty operation in industrial packaging environmentsProduction Line Integration CapabilitiesThis unscrambler integrates seamlessly at the head of a beverage production line, feeding containers to air or tabletop conveyors leading to rinsing, filling, capping, and labeling machines. It supports standalone or inline operation and can be configured to accommodate a wide range of bottle sizes.Compatible with standard conveyor interfacesFlexible layout options for compact or extended linesFormat change capability for different bottle heights and diametersSuitable for integration into water, juice, wine, beer, and general beverage production processesMachine Condition & Maintenance HistoryBuilt in 2021, this second hand unit presents a modern design life and is offered in ready-for-operation condition. Its contemporary engineering and CE-compliant construction make it a strong candidate for facilities seeking to expand or modernize their used bottling line with minimal risk and reduced commissioning time.Operational Performance & VersatilityEngineered for stable performance at up to 100 bpm, the POSIFLEX-A-20 provides gentle bottle handling, consistent orientation, and smooth discharge to conveyors. This enhances downstream efficiency by reducing starved or blocked infeed conditions at rinsers, fillers, and labelers, improving overall line OEE.Gentle handling for lightweight bottlesConsistent bottle orient... Fedpfxj Adt Nue Aanogi

Condition: used, Year of construction: 2011, Water treatment plant from Grünbeck for treatment of brewing and process water. Fully mounted on a stainless steel frame and controllable via Simatic S7-300. Reverse osmosis system for removing hardness compounds, salts, particles and micro-contaminants from water. This produces brewing water with the desired hardness. To protect the membranes, coarser particles are first removed in two fine filters (with pore sizes of 50 µm and 5 µm respectively). Desalination then takes place in two pressure pipes containing membrane modules. Includes sterilization filtration, membrane modules, chemical dosing, centrifugal pump, piping, valves, measurement technology, and control cabinet with touch panel. Additional title: reverse osmosis Permeate capacity: 8000 l/h ; Feed: 10000 l/h Recovery: 80 % Concentrate: 2000 l/h Max. overpressure: 16 bar Power: 6.5 kW Voltage: 3 x 380 - 415 V Frequency: 50 Hz Water: feed 2.5 - 5 bar Length: 5000 mm Width: 1000 mm Fodpez E Rv Ujfx Aanogi Height: 2000 mm Operation / Control: Simatic S7-300 Material: membranes from polyamid Base construction: on stainless steel frame with feet Features: 2 fine filters; pressure pipes with membrane modules; chemical dosing system with two dosing pumps; centrifugal pump (Lowara); various pipes, valves, and measurement equipment; control cabinet with touch panel

Condition: used, Plant: Mobile sludge dewatering plant, decanter / centrifuge mobile Manufacturer: Hiller Model: Solid bowl screw centrifuge Type: DP45-422 Machine No.: H3480 Year of construction: 2006 Maximum permissible: Drum speed 3800 I/min Inner diameter: Drum 450 mm Drum material: H2/St52 Electric motor: yes Fgodpfx Aajppddysnei Other: steel exchange case with reinforced bottom, accessories: pump for sludge inlet, flocculant suction pump, flocculant release pump Flocculant station 2 chamber system for liquid polymers with agitator , adjustable Double shaft paddle mixer galvanized steel Total mass : approx. 3200 kg Purchase and rent : possible.

Condition: used, Year of construction: 1996, Overview This bottle washer was built in 1995 by Swiss manufacturer PAC. The machine is still in production and be viewed in person. Techn. Details   Capacity:  10,000 bph Min/ Max: 5,000 bph – 13,000 bph Bottle type: 0,5L, Euro, NRW Bottles per row: 10 Bottles in the machine: 1,980 Bottle cell carriers: 204 Dimensions:  Length: 8,100 mm Width: 1,395 mm Height: 2,300 mm (without feet) Weight: approx. 9,210 kg Water consumption: 4,0 - 4,8 m³/h Heat consumption 80°C: 700 - 840 kJ/ h x 1000 Electrical consumtion: 17 kW Incl. Spare parts Motors for rear and front drive Bottle cell carriers Wear parts Fsdpsu H R Nnsfx Aanegi

Condition: new, Year of construction: 2025, Fully automatic capping machine for screwing screw caps onto containers including conveyor belt for integration into the packing line. Two containers can be capping per cycle and ensures a higher output per min due to the two screwing device heads. The machine is suitable for a multitude of different screw caps by means of the quick-change of screwing device head. Prior to tightening, an adjustment device provides for an exact positioning of the screw cap onto the container. Main components: PLC by Mitsubishi, sensor by Stick, pneumatic parts by AIRTAC. - Specifications: max. speed of the machine in neutral: 50 cycles/minute; conveyor belt speed: 13m/minute; cap diameter: customized; power: 220V, 3.5kW; compressed air: 3-5bar, 0.1m³; materials used: predominantly stainless steel 304, protective panel and conveyor parts are made of plastic; machine dimensions and weight: L1450xW850xH1600mm, 350kg; Conveyor belt dimensions: Length approx. 2200mm (may be adapted), width approx. 110mm (customized). Fsdov Nk Urepfx Aanjgi Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: new, Year of construction: 2025, Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. 1 head rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 20 cycles/minute; conveyor belt speed can be adjusted accordingly: 0-15m/min; bottle diameter: two ranges: a) 30-85mm, b) 80-150mm; lid diameter: customized; adjustable height of the twist off heads: 50-180mm; vacuum degree: -85kpa; materials used: mainly stainless steel 304; protective screens* and links of the conveyor belt are made of plastic; machine dimensions: L1800xW660xH1700mm; weight: 650kg. * The machine photo shows an open machine without protective covers and safety doors for a better illustration. A closed machine is delivered with protective doors and protective covers. Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty. Fjdov Nk Uxopfx Aansgi

Condition: new, Year of construction: 2025, Fully automatic twist-off lid capping machine for bottles and containers. The sealing machine is equipped with a vacuum device for a longer shelf life of your products. With two twist-off heads the rotary capper closes the lids quickly with 5-20 NM. Conveyor belts (infeed and outfeed of containers/bottles) for integration into the packaging line are included. - Specifications max. speed of the machine in neutral: 17 cycles/minute (corresponds to max. 35 bottles/container per minute); conveyor belt speed can be adjusted accordingly: 0-15m/min; bottle diameter: two ranges: a) 30-85mm, b) 80-150mm; lid diameter: customized; adjustable height of the twist off heads: 50-180mm; vacuum degree: -85kpa; materials used: mainly stainless steel 304; protective screens* and links of the conveyor belt are made of plastic; machine dimensions: L1800xW660xH1700mm; weight: 650kg. * The machine photo shows an open machine without protective covers and safety doors for a better illustration. A closed machine is delivered with protective doors and protective covers. Fgjdpjv Nk U Eofx Aanji Please note that our new prices are often below the usual used prices. Please feel free to inquire and tell us your packaging task. - Usually 30-50 different new machines are available immediately from stock. In addition, we have very short delivery times from approx. 3 weeks for customized machines. Deviations from the sample photo are possible. - All machines are available with full warranty.

Condition: used, Year of construction: 2015, operating hours: 38,000 h, functionality: fully functional, power: 70 kW (95.17 HP), 1. HKW Kuntschar + Schlüter GTK70 (70 kW electrical, MAN E0836E engine, year of manufacture 2015, in use from Q1 2020, approx. 38,000 hours, manufacturer overhaul, regular full maintenance by the manufacturer, maintenance documentation available for inspection, fully functional, out of service since 10/12/2026. Current maintenance is pending. 2. Gas condensing boiler Wolf MGK-2-470 (~200 kW real load, max. 467 kW, approx. 11 years old), used as a peak load boiler. 3. Buffer tank approx. 8,000 liters (with insulation, approx. 11 years old). Fjdpfx Aoz Tdfgsanjgi 4. Expansion tank Reflex Type N600 (600 liters): On request: Soundproof enclosure (multi-layer panels, steel frame, approx. 60 m², outdoor installation, supply/exhaust air).

Condition: used, Year of construction: 1993, Overview Fodpfx Ajyb Sxasanogi This Klinger BC 16/1 bottle washer was manufactured in 1993 by the german manufacturer Klinger and is designed for cleaning returnable glass bottles. The machine is made entirely of stainless steel and equipped with modern cleaning, dosing, and control features ensuring reliable operation and excellent hygiene results. The washer is in good working condition. Suitable for multiple glass bottle formats used in beverage filling lines. Technical Data - Manufacturer: Klinger - Type: BC 16/1 - Year of manufacture: 1993 - Application: Returnable glass bottles - Material: Full stainless-steel construction - capacity: 20.000 bottles/h Features - Complete stainless-steel construction - Steam extraction system - Finger infeed and finger discharge - Chemical dosing system - Rotating spray pipe system - Lauer control panel - Conductivity measurement - Stainless-steel filter inserts - Plate heat exchanger - Compatible with standard bottle formats

Condition: used, Year of construction: 2006, Overview  This complete filling line was manufactured in 2005 by German company Breitner Abfüllanlagen GmbH. The line is designed for mayonnaise, dressing and ketchup in glass and PEHD bottles with diameters up to 110 mm. It is reported to be in good condition. Information about the reason for sale and exact availability was not provided. Technical data - Capacity: - 212 ml round plastic: up to 2,700 bph - 250 ml oval plastic: up to 2,700 bph - 1,000 ml round plastic: up to 900 bph - 1,000 ml oval plastic: up to 900 bph - Application: - Glass & PEHD (plastic) - Neck finish: Fsdpfx Aajyighienegi - Screw-on caps Ø 30–40 mm - Twist-off caps - Formats: - 212 ml, 250 ml, 1,000 ml Scope of Delivery  - Inductive Linear Filling Machine | Breitner | IDL 2047 | 2006 | 15–45 b/min - Conveyor | Breitner | TP 6052 | 2006 | — - Capping Machine | Breitner | VS 5012-S | 2006 | Up to 60 b/min - Rotary Sorter | Breitner | DS 8003 | 2006 | — - Feeder | Breitner | SFB 8001 | 2006 | — - Conveyor | Breitner | TPK 6042 | 2006 | — - Labeller | Breitner | EM 4322 | 2006 | Up to 70 b/min - Conveyor | Breitner | TPE 6032 | 2006 | —

Condition: used, Year of construction: 2015, Overview This complete bottling line was manufactured in 2015 by KOSME and consists of a depalletizing system, rinser/filler/capper block, labeling machine, and full conveyance. The line is designed for high-quality beverage bottling using isobaric probe-valve filling technology and is suitable for products such as beer, carbonated beverages, kombucha, and specialty drinks. With a compact rotary layout and a capacity of up to 135 bottles per minute, the line offers an efficient and hygienic solution from depalletizing to labeling. The equipment becomes available as the line has been dismantled and prepared for shipment. The goods can be delivered to Port of Rotterdam (Incoterms 202) upon request. Technical Data  - Capacity: up to 135 bottles per minute (BPM) - Bottle formats: 12 oz (installed) with change parts for 22 oz / 24 oz - Filling product: beer, carbonated beverages, kombucha, functional drinks - Filling system: isobaric probe filling with electronic level control - Fill range: 12 oz – 24 oz containers - Labeling system: cold glue labeling - Bottle detection: integrated bottle burst detection system - Construction: all stainless steel, high-hygiene design - Cleaning: automatic CIP capability - Operation: touchscreen HMI with recipe and product management - Electrical supply: built for 460Y / 265 V | 3 phases | 60 Hz (US power supply) - Note: frequency / voltage converter required for non-US markets Fodpfxsyigigs Aanjgi - Condition: machine basically in good condition, dismantled and ready to ship Scope of Delivery  - Depalletizer | KOSME / Semidepal | 2015 - Rinser / Filler / Crown Capper (Monoblock) | KOSME | Barifill | 2015 - Labeling Machine | KOSME | Flexa 600 (Cold Glue) | 2015 - Bottle Conveyors | KOSME | – | Included | 2015 Additional Information - Manuals included - Basic tooling and format change parts for 12 oz and 22 oz included - Additional documentation available upon request - All conveyance lines included - Dismantling team available to supervise reinstallation and recommissioning - Utility specifications (air, CO₂ / gas) available upon request

Condition: used, Year of construction: 2016, functionality: fully functional, If you have any questions, you can contact me at any time by email. The facility is located in Laupheim. Fodpfeya H Uyex Aanegi

Condition: used, Year of construction: 2014, Overview  This complete glass bottling line was manufactured between 2010 and 2014 by several reputable European manufacturers, including CIMEC (Italy). The main monobloc — a CIMEC 16-16-1 rinsing, filling and crowning unit — was built in 2014 and operated at a natural mineral water facility until July 2025. The line also includes auxiliary equipment such as self-adhesive and wrap-around labellers, a DE filter, and a heat-shrink capsule tunnel, making it a fully functional and compact filling line for glass bottles with crown caps. All equipment remains installed, is in good condition, and can be inspected on site. Technical data  - Year of Manufacture: 2010–2014 - Application: Water and other beverages - Capacity: - Approx. 2,000 bph (330 ml) - Approx. 1,670 bph (500 ml) - Bottle Formats: 250 ml – 1,000 ml (included: 330 ml & 500 ml) - Closure Type: 26 mm crown caps - Configuration (Monobloc): - 16 rinsing heads - 16 filling heads Fodpfx Aaoyb Tkdsnogi - 1 crowning head Scope of Delivery  - Rinser / Filler / Crowner Monoblock | CIMEC | Monobloc 16-16-1 | 2014 | 16/16/1 configuration, 26 mm crown caps, 2,000 bph - Self-adhesive labeler | Canellitech | V500 | 2012 | Linear, up to 3. 500 bph - Single-head labeler (wrap-around) | Identapply | Servo 125 RH | 2010 | With conveyor belts - DE filter | Spadoni | - | 2011 | 80 hl/h - Shrink tunnel | TOSA | TN1 | 2011 | For PVC capsules