Used Bottom Plate for sale (13,614)

Condition: ready for operation (used), bottom wrapper Ljdsd Hrpqepfx Abvohd

Condition: ready for operation (used), bottom wrapper Lhodjd Hrqmepfx Abvjd

Condition: ready for operation (used), Size with pallet feeder max 660 x 1040 mm Speed max 210 m/min Equipment • pallet feeder with Tremat suction head 1st folding unit: • 4 buckle plates • noise prevention peripheral units and deliveries • marking device MKE 66 Loded Iq S Rjpfx Abvehd • upright stack delivery with pressing SBP 66

Year of construction: 1989, condition: used, Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder 1st folding unit: • 4 buckle plates • Festa foldingrolleradjustment • noise prevention Lhsdpfxoc Rhvto Abvsd

Year of construction: 1999, condition: good (used), Built in 1999 Size Lhedefbff Uopfx Abved max 820 x 1.750 mm Size with continuous feeder max 820 x 1.750 mm min 150 x 150 mm Speed max 205 m/min Length with continuous feeder 7.680 mm Width 3.210 mm Equipment feeder: continuous feeder 1st folding unit: 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts 2nd folding unit: working width max. 68 cm 6 buckle plates motorized setting of buckle plates rear-mounted slitter shafts peripheral units and deliveries belt delivery

Year of construction: 1997, condition: good (used), Built in 1997 Size 1.300 x 1.650 mm Speed 150 m/min Equipment feeder • pallet feeder (MABEG) 1st folding unit Lodpfx Asdymm Hobvehd • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 2nd folding unit • 4 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention 3rd folding unit • 2 buckle plates • separate deflectors • soft-pu steeel folding rollers • rear-mounted slitter shafts • noise prevention delivery • belt delivery

Condition: good (used), Size max 360 x 650 mm min 80 x 100 mm Speed max 150 m/min Equipment • flat pile feeder • counter PCS 100 1st folding unit • 4 buckle plates • Festa foldingrolleradjustment • pu steel folding rollers • noise prevention 2nd folding unit • attachable knife-folding unit • mobile knife-folding unit KB 36 peripheral units and deliveries Lhsdpfx Aohf Aw Uobvod • attachable belt delivery

Year of construction: 1997, condition: used, Built in 1997 Size with flatpile feeder max 520 x 840 mm min 100 x 150 mm Lhedpfx Abjdm U Dhjvjd Speed max 180 m/min Equipment: • flat pile feeder • counter 1st folding unit: • 4 buckle plates 2nd folding unit: • 4 buckle plates peripheral units and deliveries: • belt delivery

Condition: ready for operation (used), Size with flatpile feeder max 660 x 1040 mm Speed max 210 m/min Equipment Lhodpfed Iq S Usx Abved feeder • flat pile feeder • Tremat 1st folding unit • 4 buckle plates • noise prevention 2nd folding unit • 4 buckle plates • noise prevention delivery • delivery SBP 46

Condition: ready for operation (used), Size max 560 x 920 mm min 150 x 180 mm Speed max 180 m/min Equipment feeder: Lhodpfx Abod A Hcvevjd • continuous feeder • MS control • counter 1st folding unit: • 4 buckle plates • noise prevention delivery: • belt delivery

Year of construction: 2002, condition: used, Size max 1.120 x 1.450 mm min 250 x 250 mm Speed max 10-16 m/min Equipment: feeder • pallet feeder (MBO) • MC control 1st folding unit: • 4 buckle plates • rear-mounted slitter shafts • noise prevention 2nd folding unit: Lhodjddh Evopfx Abvsd • 4 buckle plates • rear-mounted slitter shafts • noise prevention 3rd folding unit: • 2 buckle plates • rear-mounted slitter shafts • noise prevention delivery: • belt delivery

Condition: ready for operation (used), bottom wrapper Lhjdpfed Hrqgox Abvod

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2001, machine/vehicle number: 66654, sheet thickness (max.): 6 mm, working length: 4,050 mm, TECHNICAL DETAILS Working length: 4,050 mm Maximum sheet thickness: 6 mm MACHINE DETAILS Lhsdpfxeylv Nwj Abvjd Voltage: 380 V EQUIPMENT Electrically adjustable back gauge Electrically adjustable cutting angle Electrically adjustable blade gap Electrically adjustable blade gap

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2005, machine/vehicle number: 20345, sheet thickness (max.): 10 mm, working length: 4,000 mm, TECHNICAL DETAILS Max. sheet thickness: 10 mm Working length: 4,000 mm Lhedpfxsylv Ito Abvjd MACHINE DETAILS Voltage: 380 V 50 Hz EQUIPMENT Electric backgauge

Condition: used, Year of construction: 1980, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° Lsdpfxoyv N I Aj Abvohd table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1600 kg Equipment: - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1977, sheet width 3050 mm plate thickness 6 mm Lhjdpfx Ajyv Nzcjbvod weight 7.000 kg range L-W-H 3450x2200x1750 mm Equipment/accessories: - adjustable support table - Sheet support - angle stop - Sheet support arms - foot switch

Condition: used, Year of construction: 1990, sheet width 2500 mm plate thickness 4 mm cutting angle 1,49 ° 40-80 column arm 200 mm Number of hold downs 13 Stück back stop - adjustable 5-1000 mm table height 750 mm oil volume 85 l air pressure - required 5 bar range L-W-H 3100x1900x1500 mm weight of the machine ca. 3.600 kg Accessories: -Control RAS Multicut 2000 -Sheet metal holding device -Foot switch -Angle stop -Sheet metal support arms -Side protective grilles Lhodpfx Absyv Nx Ijvjd

Condition: new, sheet width 1350 mm 3 mm sheet thickness for stainless steel 1,5 mm rear stop 600 mm total power requirement 3 kW weight of the machine ca. 1150 kg dimensions 2030 x 1940 x 1220 mm Standard equipment: - All-steel welded construction with static and dynamic frame rigidity frame rigidity Lhjdpfx Ajyv Nt Sobvjd - Direct drive with brake motor - Specially alloyed cutting blades - 750 mm motorized, digitally adjusted backgauge with ball screws recirculating ball screws - Manual blade gap adjustment system - Mechanical sheet clamping system with plastic base - Work table with insert plates - foot switch for single and repeat cutting cycles - 1 x squaring arm 1000 mm long with metric scale - 2 x 800 mm front material support arms - Front stop - Finger protection - front and rear covers - Rear light guards - CE declaration of conformity

Condition: used, Year of construction: 1986, sheet width 2540 mm plate thickness 2 mm thickness at "Niro-steel" 1,25 mm no. of strokes 63 Hub/min cutting angle 1,13 ° table height 750 mm table width 320 mm back stop - adjustable 5,0-550 mm total power requirement 3 kW weight of the machine ca. 1300 kg Equipment: Ledjyv Nn Aopfx Abvohd - manual backgauge, with analog display * Adjustable from the front * stepless adjustment over the entire travel range - 1x long side stop - 3x support arms - Free-moving foot switch - Sheet holding device for thin sheet blanks

Condition: used, Year of construction: 1971, sheet width 2550 mm plate thickness 3,5 mm range L-W-H 3200x1300x1400 mm weight of the machine ca. 3.000 kg Lhjdpfxjyv Nmxo Abvjd

Condition: used, Year of construction: 1995, plate length 2500 mm plate thickness 2,5 mm Lsdpoyv Nlnefx Abvehd

Condition: used, Year of construction: 1990, sheet width 2000 mm Lodpfx Abjyv I Tqjvshd plate thickness 1,5 mm

Condition: used, Year of construction: 1994, sheet width 4000 mm Lhsdpfxeyv Nnco Abved plate thickness 6 mm distance between columns 4010 mm machine weight ab. 7.500 kg total power requirement 16 kW rear stop 700

Condition: used, 2 clamping plates, 1 pair of clamping rails with T-slots Clamping block, press table, auxiliary table with T-slots Length per clamping rail: 900 mm Width per clamping rail: 295 mm Thickness per clamping rail: 130 mm - 6x T-slots, 30 mm - T-slot spacing: 150 mm - 6 holes Ø 18 mm (spacing 300 x 160 mm) - All sides machined surfaces Ledpfxsxf Uwlo Abvohd Net weight per clamping rail: 240 kg Net weight of both clamping rails: 480 kg Good condition

Condition: good (used), Year of construction: 2006, sheet width 2530 mm plate thickness 2.50 mm thickness at "Niro-steel" 1.50 mm no. of strokes 34 Hub/min cutting angle 1.7 Grad table height 820 mm distance between columns 2620 mm Control konv. engine output 4.0 kW Ledpfx Abjym D Dxevshd weight of the machine ca. 1350 kg. range L-W-H 3100 x 1980 x 1400 mm Features: - robust / motorized swing cut guillotine shears - unbreakable and torsion-free welded steel construction - compact and clear machine construction - manual backgauge, with analog display * Adjustable from the rear * stepless adjustment over the entire travel range - all-steel blade, double-edged - 1x hold-down bar - 1x long side stop - 2x front support arms - Support/working table with 10 mm spaced grooves - Selector switch for single and continuous stroke - 1x freely movable foot switch - Operating instructions