Used Box Column Drilling Machine for sale (107,726)

Condition: used, Box column drilling machine WEBO Series- No 132 Machine No: 9 Drilling capacity 50 mm Spindle cone MK 5 - long quill throat 430 mm spindle stroke 280 mm Height adjustment of drill head 500 mm Table size Ø 725 mm Distance between drill spindle and table max. 740 mm Distance between drill spindle and clamping surface on machine base max. 1240 mm Spindle speed 55-820 rpm Feed rate level 1 0.13 - 0.2 - 0.27 - 0.4 mm/rev. Feed rate stage 2 0.6 - 0.83 - 1.17 - 1.8 mm/rev. Column diameter 300 mm Motor power 2.8 / 3.6 kW pole-changing Mains connection 380 Volt, 50 Hz - Spindle speed via 2 motor speeds and infinitely variable via variator - Manual drill head height adjustment via hand crank, clamping with clamping screws - Rotatable drilling table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 600 x 550 mm Top height of drill head 3020 mm Overall height drill head bottom 2520 mm Space requirement L x W x H 1400 x 780 x 2520 mm Weight 1600 kg good condition Bg0Ucd2Wr2N

Year of construction: 1970, Condition: ready for operation (used), Box column drilling machine 7Ndsjuuz Make ALZMETALL Type:AB4 HST Year 1970 with coolant device . drilling capacity in steel max : 40 mm spindle mounting : MK4 spindle speed : 80-710 rpm feeds : 0.09 - 0.16 -0.28 mm/rev table size : 600X460 mm Machine is ready for use .

Condition: good (used), Year of construction: 1985, Drilling capacity in steel St 37 30 mm Drilling capacity in GG 35 mm Drill spindle holder MK 3 Speed range 75 - 1600 rpm. 3 feeds 0.1 - 0.2 - 0.3 mm/rev Spindle projection 300 mm Spindle stroke 150 mm Table size 420 x 380 mm Column diameter 130 mm Motor power 1.5 kW Dimensions L x W x H 700 x 450 x 1820 mm Machine weight 350 kg Accessories / Special features: - 3 feeds - Speeds via quick belt adjustment - Large drilling depth adjustment with 150 mm fixed stop - Swivel table - Emergency stop switch - Lighting The following work was carried out by us: - Repositioning of the drill spindle - New return spring Cgdrhpka8D - Gearbox resealed - Oil change Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Machine/vehicle number: 90007, with machine vice Cwxt3Ciela

Condition: used, Column drilling machine GOTHA Drilling capacity 30 mm Spindle holder MK 3 - long quill throat depth 350 mm quill stroke 200 mm Table size Ø 460 mm Spindle speed 160 - 750 rpm 4 steps Feed rate 0.1 - 0.2 - 0.3 mm/rev Isvcywm Column diameter 160 mm Motor power 2.2 kW Mains connection 380 Volt, 50 Hz - Spindle speed via 4 gear stages - Automatic feed - Rotatable drilling table with mechanical clamping - Table height adjustment via hand crank - Clamping surface on machine base 450 x 450 mm Space requirement L x W x H 700 x 500 x 2000 mm weight 580 kg good condition

Condition: used, Year of construction: 1971, drilling capacity steel/GG: 23 mm spindle taper: 3 MK arm length: 275 mm table size: 300 x 400 mm spindle sleeve stroke: 90 mm Bebihlvtna spindle turning speed range: 100 - 1180 rpm carriages: 0,1/0,6/0,25 mm engine: 380 V, 1,25/2,15 kW space needed: 850 x 400 x 1770 mm weight: 280 kg

Condition: as good as new (ex-display), Year of construction: 2024, OPTIdrill D 26PRO - column drilling machine Bench and column drilling machine with belt drive Easy to use security switch to IP 54 with undervoltage release and separate emergency stop pushbutton 400 Volt models with right/left rotation Drilling depth stop Precision machined table with diagonal T-slots Height adjustment of the drilling table with rack and pinion Drill table ± 45 ° tilt and 360 ° V-belt cover with safety switch Aluminium die-cast tailstock lever from one piece with Softgrip-handles Industrial motor Precision spindle bore Machine operation including security electrical work 24 V DC Guaranteed accuracy < / = 0.02 mm in the drilling spindle measured Drill with precision ball bearings High-quality quick clamping drill Chuck Bavy0Xug7L Generously dimensioned, height-adjustable safety glass with safety switch Heavy duty of the whole machine Belt drive Smoothness thanks to polished splined hubs Best power transmission by aluminium pulleys in conjunction with toothed GATES quality belt (from B 23Pro) From Pro B-23 GATES quality belts From B 23 Pro / 400 V Right / left rotation Scope of delivery: Dome MK 3 - B-16 Keyless drill Chuck 1-16 mm T slot nuts Model OPTIdrill D 26PRO Item No. 3003030 Technical data Electrical connection 400 V / 3 pH ~ 50 Hz Motor power 750 W Drilling performance steel (S235JR) 25 mm Dauerbohrleistung steel (S235

Condition: new, ALZMETALL column drilling machine Alzstar 23 S Manufacturer: Alzmetall Type: Alzstar 23 S Condition: NEW Drilling capacity steel E335 (St 60) 23 mm Thread cutting Steel E335 (St 60) M 14 Cast iron EN-GJL-200 (GG20) M 16 Short spindle MK 2 Spindle stroke 100 mm Projection 250 mm Column diameter 90 mm Machine table, usable support 370 x 300 mm T-slots, number x width x distance 2 x 14 x 160 mm Spindle-table distance min./max. 140/670 mm Manual feed Machine height without options approx. 1770 mm Net weight approx. 175 kg Drive stepless Motor 750 / 1500 rpm Power 0.6 / 0.95 kW Spindle speed rpm 225-4300 Standard equipment: Mushroom pushbutton (latching) for EMERGENCY STOP Reversing switch for clockwise and counter-clockwise rotation Motor protection switch Infinitely variable speed adjustment Digital speed display C0Ru7Gwpzk Protection class IP 54 Connection plug (fully assembled, cable length 2m) Spindle protection with electrical fuse Paint finish: DD textured paint light grey RAL 7035, anthracite RAL 7016

Condition: excellent (used), Year of construction: 1979, Functionality: fully functional, Machine/vehicle number: 20782, Equipment: - Plinth base plate - Rectangular table - Long spindle MK3 - Motor protection switch with undervoltage release for drive motor - Lockable main switch - Built-in machine light Dpnkip - Mushroom pushbutton (latching) for EMERGENCY STOP in the front panel - Manual feed - Quick-action drill chuck 0-13 mm - Documentation (Machine was used in a training workshop)

Condition: used, Machine/vehicle number: 2083/944, with 2 vices Dpretz

Year of construction: 1980, Condition: used, Column drilling machine CORDIA type HS 30 VG Machine no. No. 303.081.118 Year of manufacture approx. 1980 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat depth 300 mm Quill stroke 160 mm Table size 500 x 450 mm Column diameter 125 mm Spindle speed 38-1450 rpm 12 steps Bkthlecu8Se Feed rate 0.1 - 0.2 - 0.25 mm/rev Motor power 1.5 / 1.7 / 2.3 kW Mains connection 380 Volt, 50 Hz - Pole-changing main motor with 3 speeds - 4 gear stages - Thread cutting device - Table height adjustment via hand crank - Clamping surface on the machine base Space requirement L x W x H 700 x 550 x 2100 mm weight 390 kg good condition

Condition: used, Year of construction: 1955, drilling capacity steel/GG: 40/55 mm Sikn8L7S spindle taper: 4 MK arm length: 345 mm table size: 500 Ø mm spindle sleeve stroke: 170 mm spindle turning speed range: 80 - 710 rpm carriages: 0,09/0,16/0,28 mm engine: 380 V, 2,2/2,5 kW space needed: 1070 x 500 x 1940 mm weight: 620 kg

Condition: new, Year of construction: 2024, Heavy-duty design of the entire machine High running smoothness thanks to new spindle design Industrial motor Separate emergency-stop pushbutton Drilling depth stop LED machine light integrated in the drill head Precisely machined, stable drilling table with diagonally running T-slots with circumferential cooling water channel Drilling table can be tilted ± 45° and rotated 360 V-belt cover with safety switch Precision spindle bore Machine operation Safety electrics in 24 V DC voltage. Guaranteed concentricity ≤ 0.02 mm measured in the drilling spindle Thick-walled steel column for high force absorption and stability Solid, large dimensioned base plate with T-slots Dimensions and weights By7S0Czghq Column diameter 92 mm Length approx. 945 mm Width/depth approx. 485 mm Height approx. 2040 mm weight approx. 162 kg Drilling capacity Drilling capacity steel (S235JR) 30 mm Continuous drilling capacity steel (S235JR) 25 mm Drilling table Working surface length 355 mm Working surface width 355 mm Type of T-slots diagonal T-slots size 14 mm T-slots number 2 Rotation 360 ° Inclination 45 ° Distance spindle - drilling table max. 784 mm Speed range Speed range 120 - 1810 min¯¹ Number of speed ranges 9 Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine base Distance spindle - machine base max. 1470 mm Working surface length 230 mm Working surface width 300 mm T-slots size 16 mm T-slots number 2 Spindle quill stroke 125 mm spindle mounting MK 4 throat 270 mm Location: Ex stock 54634 Bitburg - immediately available- [...]

Condition: new, Column drilling machine Alzmetall Alzstar 40/SV Manufacturer: Alzmetall Type: Alzstar 40/SV Condition: new Technical Data: Column diameter: 115 mm Machine table (usable support): 514 x 360 mm T-slots (number x width x distance): 2 x 14 x 224 mm Spindle-to-table distance (min./max.): 117 / 701 mm C0Rsdzvyim 2 feeds: 0.1 + 0.2 mm/rev Height (mm): approx. 1840 Drilling capacity St 60 (mm): 40 Spindle stroke (mm): 120 Projection (mm): 293 Motor (kW): 1.45 / 1.9 Speed range (r/min): 160 - 2250 Weight (kg): 285

Condition: new, Drilling capacity max.: 30 mm Thread cutting: M 16 Tool rear ham: MK 3 Spindle speeds, infinitely variable: 150 - 2500 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 92 mm Table size / T-slot size: 500 x 400 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 640 x 850 x 1850 mm Weight approx.: 265 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - CE / IEC, German Documentation and German Service Delivery: - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 Bfgythxbz0 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Year of construction: 2009, Condition: used, Column drilling machine IXION - MAXION type Unimax 3 serial no. 201516 year of construction 2009 Drilling capacity 30 mm Spindle holder MK 3 - short quill throat 260 mm Quill stroke 125 mm Table size 360 x 500 mm D7Udzas Column diameter 110 mm Spindle speed 80 - 3200 rpm infinitely variable Motor power 0.8 / 1.5 kW Mains connection 400 Volt, 50 Hz - Spindle speed via 2 V-belt stages, 2 motor speeds and infinitely variable via variator drive - Motor speed level 1 for clockwise and counter-clockwise rotation, motor speed level 2 for clockwise rotation - Handwheel for quill fine feed - Drill table height adjustment via hand crank - RÖHM quick-action drill chuck Ø 1 - 16 mm - Emergency stop button Space requirement L x W x H 800 x 530 x 1800 mm Weight 230 kg Very good condition

Condition: new, Alzmetall Alzstar 30/s pillar drilling machine Manufacturer: Alzmetall Type: Alzstar 30/S Condition: new Drilling capacity steel E335 (St 60) 30 mm Thread cutting Steel E335 (St 60) M 16 Cast iron EN-GJL-200 (GG20) M 20 Short spindle MK 3 Spindle stroke 140 mm Projection 293 mm Column diameter 115 mm Machine table, usable support 514 x 360 mm T-slots, number x width x distance 2 x 14 x 224 mm Dpsnqh Spindle-to-table distance min./max. 132/724 mm Manual feed Machine height without options approx. 1770 mm Net weight approx. 260 kg Drive stepless Motor 750 / 1500 rpm 750 / 1500 rpm Power 1.0 / 1.6 kW 1.0 / 1.6 kW Spindle speed rpm 225-4300

Condition: new, Drilling capacity max.: 35 mm Thread cutting: M 24 Tool rear ham: MK 4 Spindle speeds, infinitely variable: 65 - 2000 rpm Extension: 265 mm Drilling depth: 150 mm Pinole feed: 0.05 / 0.1 / 0.2 mm/U Column diameter: 115 mm Table size / T groove size: 685 x 485 mm / 14 mm Engine power: 1.5 kW Machine dimensions (W x D x H): 950 x 580 x 2000 mm Weight approx.: 385 kg Characteristics: - Vario drive for infinitely variable adjustment of the desired speed - Pinole delivery either by hand or by mechanical feed - Set speed by means of digital display quickly and easily readable - Stable casting table with T-slots and coolant gutter - Adjustable drilling depth stop, drilling depth can be read by scale - Thread cutting device - Gearbox pre-bed - CE / IEC, German Documentation and German Service Delivery: Bfjiv8F2Sr - Table clamping and height adjustment from the front - Quick-clamp chuck 1 - 16 mm / B 18 - Drill chuck mandrel MK 3 / B 18 - Coolant device - Digital speed display - Reducing sleeves MK 3/2, MK 3/1 - LED machine light - Height-adjustable protective cover

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL bench drills and pillar drills in our program. You can get an overview of our drilling machines on our homepage. If you have any questions, just give us a call. Here we offer the new series of ALZMETALL pillar drills with TOUCH display: ALZMETALL AX3 iTRONIC-V pillar drill Condition: NEW Standard equipment 7" TFT LCD display with touch function: - Manual input of spindle speed set value - Actual speed display - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status indicators and warnings on the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Infinitely variable speed setting by means of adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Dpsnpt Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable throat depth (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Spindle-to-table distance (mm): 117 / 701 Feed rate: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Further options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Quick-action drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For collection by the customer. Forklift available. Shipping also possible Errors, changes and prior sale reserved. Not the right machine? Then please contact us.

Condition: new, Stepless pillar drilling machine for versatile applications. Equipped with digital speed display as standard. Drilling table adjustable via toothed rack and swivels around the column. Motor protection switch, star grip. Picture shows SB 25 S Technical data: Drilling capacity: 30 mm spindle: MK 3 E0Eymybif drilling depth: 130 mm throat depth: 250 mm spindle speed, infinitely variable: 230 - 2700 rpm table size: 460 x 360 mm column diameter: 100 mm dimensions, approx. (WxDxH): 600 x 810 x 1780 mm motor power: 1,5 kW Mains connection: 400 V Weight, approx.: 230 kg Equipment: - Stepless speed adjustment with digital display - right / left rotation - T-slot stones - 24 V electrics - Height adjustable spindle protection device with micro limit switch - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivels around column - Reversing switch for R/L-run (option) Scope of delivery: - Machine light - emergency stop pushbutton - full motor protection - star grip - CE

Condition: new, As a machine dealer in Offenburg, we have new and used ALZMETALL bench drills and pillar drills in our program. You can get an overview of our drilling machines on our homepage. If you have any questions, just give us a call. Here we offer the new series of ALZMETALL pillar drills with TOUCH display: Dpsnpj ALZMETALL AX3 iTRONIC-V pillar drill Condition: NEW Standard equipment 7" TFT LCD display with touch function: - Manual input of spindle speed set value - Actual speed display - Integrated drilling depth display with touch zero point transfer - Virtual drilling depth scale in the display - Machine status indicators and warnings on the display - Service information - Selectable operating language: DE/EN/FR/ES/IT/NL/RU - Infinitely variable speed setting by means of adjustment lever - Spindle protection with electrical fuse - Three separate buttons for clockwise rotation - anticlockwise rotation - stop - Mushroom pushbutton (latching) for EMERGENCY STOP - Lockable main switch - Clockwise and counter-clockwise rotation via contactor control - Control voltage 24 Volt - Protection class IP 54 - Paint finish: DD textured paint signal white RAL 9003, PANTONE 7545c, black Technical data: Manufacturer: ALZMETALL Type: AX 3 iTronic-V Drilling capacity steel E 335 (St 60) (mm): 40 Thread cutting steel E 335 (St 60): M 24 Thread cutting cast iron EN-GJL-200 (GG 20): M 30 Short spindle: MK 3 Spindle stroke (mm): 120 Usable throat depth (mm): 293 Column diameter (mm): 115 Machine table (mm): 515 x 360 T-slots (mm): 2 x 14 x 224 Spindle-to-table distance (mm): 117 / 701 Feed rate: 0.1 + 0.2 mm/rev Machine height (mm): approx. 1840 Drive: stepless Speed range (r/min): 160 - 2250 Motor (kW): 1.45 / 1.9 Weight (kg): approx. 270 Special equipment included: - Foot switch in addition to the thread cutting device Further options can be retrofitted: - LED machine light - Coolant system B - Technology calculator in the display - Maximum drilling depth display Optional accessories: - Machine vice size 3/125mm BB type BON3 - Machine vice size 4/160mm BB type BON4 - Quick-action drill chuck Supra 1-13mm or 3-16mm MK3 Available at short notice. For collection by the customer. Forklift available. Shipping also possible Errors, changes and prior sale reserved. Not the right machine? Then please contact us.

Condition: new, Continuous drilling capacity: 25 mm Normal drilling capacity: 30 mm Thread cutting power: M 16 Spindle: MK 3 Drilling depth: 135 mm Spindle speeds infinitely variable: 150 - 3000 rpm Table size: 460 x 360 mm Weight: 225 kg Y9J83Dwb Mains connection: 400 volts, 50 Hz Facilities: - Thread cutting device - Digital display for speed as standard - Coolant device - LED machine light - Stepless speed adjustment - 24 V Electric - Base plate with T-slots - Drilling table adjustable via rack and worm gear and swivelled around column - Emergency-off-strike button - Motor full protection - Star handle - CE compliant

Condition: new, Modern, precise production column drill according to the proven UNIMAX 3 concept with infinitely variable feed drive, automatic tool ejector and chip breaker control as standard. The digital display shows feed, speed and drilling depth. Reverse switch right/left rotation. Emergency stop button. Full motor protection. Pre-configured machine with optional threading device, free cutting function and LED lamp. Normal drilling capacity in E 335: 30 mm Thread cutting capacity: M 20 Spindle: MK 3 feed infinitely variable in the range: 30 - 400 mm/min Drilling depth programmable: 125 mm Projection: 260 mm distance spindle/table: 90 to 840 mm Table surface: 500 x 365 mm Column diameter: 110 mm total height: 1.900 mm Weight: 280 kg Motor pole-changing: 0.8/1.5 kW Spindle speeds infinitely variable Drilling range A: 80 - 1,440 rpm Drilling range B: 180 - 3,200 rpm Preconfigured machine including optional equipment: - Thread cutting device - Free cutting function - LED light Machine in stock. Sbd38Wq

Condition: new, Infinitely variable pillar drill with fully-fledged tapping unit. Equipped with digital speed display as standard. Drilling table adjustable via rack and swivels around the column. Motor protection. Technical data: Drilling capacity: 40 mm Thread cutting: M 24 Spindle: MK 4 Drilling depth: 150 mm Spindle speeds, infinitely variable Range A: 65 - 540 1/min Range B: 245 - 2000 1/min throat depth: 265 mm Quill feed: 0.05 / 0.1 / 0.2 mm/rev Column diameter: 115 mm Table size: 560 x 470 mm / 14 mm Base plate size: 685 x 485 mm Dimensions, approx. (W x D x H): 580 x 950 x 2000 mm Connected load: 1.7 kVA Weight, approx.: 370 kg Equipment - Gearbox reduction gear - Large machine table - Digital speed display Bhebfvvuyes - Stepless speed adjustment - Thread cutting device - Table clamping and height adjustment from the front - Drilling depth stop - Overload protection Scope of delivery: - Coolant device - Two MK 3/2 reducing sleeves - LED machine light - Height-adjustable protective cover with micro limit switch - Operating instructions - CE/IEC conformity

Condition: new, Technical data: Drilling capacity: 50 mm tool holder: MK 4 quill stroke: 200 mm throat depth: 340 mm Speeds: (6) 50 - 1510 1/min table size: 600 x 600 mm column diameter: 180 mm number of T-slots: 2 T-slot size: 22 x 35 motor power: 3 kW Weight, approx.: 750 kg Equipment: - Coolant device Csh8Bo3L - Automatic spindle feed - LED machine light - Height adjustable protective cover - Rotatable table - Manual fine feed - Limit switch protected spindle guard