Used Brian Beckum Construction Circular Saw for sale (23,646)

Condition: used, Miter cross-cut saw for aluminum (special machine construction with 4 servo motors) Circular saw, miter saw, rip saw year of construction 2002 Saw blade diameter 500 mm Sawing range at 90° round Ø 180 Rectangle 350 x 140 mm (through longitudinal cut) Sawing range at 45° round Ø 180 Rectangle 350 x 100 mm (through longitudinal cut) Guide length of base support 1100 mm Travel on the base support (forwards and backwards) 650 mm Iaodpfx Asdzp T Depnst Travel on the stand (up-down) 120 mm Saw blade speed approx. 3000 rpm Motor power 2.2 kW Mains connection 400 Volt, 50 Hz - Controlled longitudinal cutting movement - Controlled saw blade height adjustment - Controlled mitre cut through swivelling saw unit - Controlled miter cut by tilting saw unit - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gears (MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN motor) - Vertical axis movement via INDRAMAT servomotors and ball screws (MKDO41B-144-KP1-KN motor) - a total of 4 Indramat servomotors are installed - very good German mechanical engineering Space requirement L x W x H 1150 x 1100 x 1400 mm weight approx. 360 kg good condition The unit comes from a special machine for special products. All other components and electrical parts for the construction of a new special machine are also available.

Condition: good (used), construction circular saw, circular saw -Engine power: 2.6 KW -Voltage: 220 volts -Dimensions: 885/670/H810 mm Iaodod R N Inspfx Apnjt -Weight: 42 kg

Condition: used, Year of construction: 2008, KALTENBACH KKS 400 E HYDRAULIC METAL CIRCULAR SAW MAKE KALTENBACH, MADE IN GERMANY MODEL KKS 400 E YEAR 2008 SAW BLADE DIAMETER Up to 400.0 mm CUTTING CAPACITY AT 90 DEGREES ROUND: 130.0 mm SQUARE: 120.0 mm FLAT: 305.0 x 40.0 mm or 240.0 x 85.0 mm CUTTING CAPACITY AT 45 DEGREES ROUND: 130.0 mm FLAT: 245.0 x 30.0 mm or 180.0 x 70.0 mm MILTER ADJUSTABLE LEFT - RIGHT 0 – 90 DEGREES INFINITELY VARIABLE SAW BLADE FEED RATE 0 – 10 m/min SAW BLADE CUTTING SPEED 13 / 26 m/min SAW DRIVE 400 V / 1,7 / 2.6 kW HYDRAULIC DRIVE 400 V / 0.75 kW Iedpfx Apjy D I Nnsnoat PLUS 2 SETS OF LOADING RACK

Condition: used, Year of construction: 2002, Sawblade tiltable 46 ° Length of the rolling table ~ 3.200 mm Isdpey Spv Eofx Apneat cutting width ~ 1.100 mm Cutting height max. 170 mm Saw blade diameter max 500 mm Motor output 5,5 kW Scoring unit 0,75 kW Martin T 73 Classic sliding table saw for precise cutting of solid wood, panel materials and coated materials with swivel saw blade and scorer. The machine enables precise rip, cross and mitre cuts and is designed for daily use in professional woodworking. Includes a comprehensive range of saw blades.

Condition: good (used), Manufacturer: Kaltenbach Model: KKS 400 E Saw blade diameter: 400 mm Cutting range round: 130 mm rectangular: 305 x 40 mm Mitre cut at 45° round: 130 mm rectangular: 245 x 40 mm 2 cutting speeds: 9 and 18 m/min Feed speed steplessly adjustable: 0 - 1000 mm/min Saw drive: 380 V, 1.7/2.6 kW Weight approx.: 800 kg The machine is in very good condition and ready for immediate use Forklift available, free loading onto truck Affordable shipping possible Machine location: 48477 Hörstel Iasdpfx Apjy Sktfsnot

Condition: used, cutting width 250 mm Table dimensions 500 x 650 mm Saw blade diameter max. ca. 300 mm Frommia KS 381 table saw for precise longitudinal and cross cuts in solid wood and wood-based materials. The robust construction, angle stop, and swivel table enable reliable work in crafts and workshops. Ideal for carpentry shops and general woodworking and furniture construction. Iodpfx Apeyr Slbjneat

Condition: used, Sawblade tiltable 45 ° Isdpfx Asypwaxjpnjat Motor output 11 kW Cutting height ca. 280 mm Saw blade diameter 780 mm Large mobile timber circular saw A.Reckers type ATS for various sawing tasks in workshops or on construction sites.

Condition: good (used), cutting width 300 mm Cutting height 85 mm Motor output 1,5 kW saw-blade dia. 300 mm Iasdpsyiu Sfjfx Apnst connected load frequency 380 V

Condition: excellent (used), length ca. 3.200 mm width ca. 1.400 mm height ca, 1.600 mm Motors 2 table - swivable Ja Iajdpfx Aexwbpfspnst The stable Bäuerle KFL combined woodworking machine combines a sliding table saw, slot drilling machine, and table router with feed in one machine and comes with a wide range of accessories. Roller table: yes

Condition: used, engine 3 KW cutting width tba mm roller table nein ja/nein Three-function combined table saw, slot drilling, and milling machine Kirchner Leipzig. Without milling arbor. Iajdpfx Ajwzbcvopnjt

Condition: used, length ~ 600 mm Iajdsulfftspfx Apnst width ~ 700 mm height ~ 1.000 mm saw-blade dia. max. ~ 300 mm Sharpening machine cut-off saw for sharpening small circular saw blades.

Condition: used, cutting width 90°: 410 / 45°:290 mm Iodpfxoy Ihauo Apneat Cutting height 170 mm Cutting height at 45° 115 mm saw blade diameter 420 mm machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Condition: used, cutting width 90°: 410 / 45°:290 mm Cutting height 170 mm Cutting height at 45° 115 mm saw blade diameter 420 mm Isdpjy Ihahofx Apnsat machine weight ab. 150 kg Saw blade 40 mm saw blade turning speeds 3350 U/min

Condition: used, Year of construction: 1979, saw blade diameter 300 mm cutting diameter 100 mm saw blade turning speeds 40 / 80 U/min capacity 90 degrees: square 90 mm capacity 90 degrees: round 100 mm total power requirement 1,5 kW Isdpfxoy N D Nnj Apnoat weight of the machine ca. 0,5 t

Condition: used, Year of construction: 2012, saw blade diameter 400 mm capacity 90 degrees: round 130 mm Iajdpfx Aey N D Nhepnjt capacity 90 degrees: square 110 mm capacity 90 degrees: flat 180 x 100 mm saw blade turning speeds 3000 U/min total power requirement 2,2 kW weight of the machine ca. 0,51 t dimensions 3,8 x 1,6 x 1,7 m Automatic Aluminum Circular Saw - Outfeed roller conveyor (4000 mm) with handwheel, flip-up stop, and digital system - Infeed roller conveyor (3500 mm) - Transport dimensions 6.0m x 2.0m x 1.6m

Condition: excellent (used), Year of construction: 2004, 1 used, very well-maintained fully hydraulic circular cold saw automatic with flat vertical guides Iaedpfx Apjy E Uk Ienjt Max. saw blade diameter: 325 mm Cutting capacity at 90°: - Round: 100 mm - Square: 85 x 85 mm - Rectangle, flat: 165 x 85 mm Infinitely variable speed range: 20 - 100 rpm Max. saw blade dimensions: 325 x 3.0 x 40 mm Single stroke feed: up to max. 550 mm Multiple stroke feed: for lengths over 550 mm Working height: 930 mm Drive power: 3 kW / 400 V Machine dimensions (L x W x H): 2150 x 1450 x 1950 mm Weight: approx. 650 kg Accessories / Special Features: • Fully hydraulic design • Fully automatic operation, single cuts also possible • Vise feed • 90° cutting angle • Infinitely variable speed range 20 - 100 rpm • Length setting via programming on the control panel • Cutting speed and feed can be continuously adjusted on the control panel during operation • Single and multiple stroke feed • Adjustable flat vertical guides • Coolant system • Micro-spray system • 1 used saw blade included • CE compliant Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel / Germany

Condition: new, Year of construction: 2024, Underfloor light metal circular saw Make: METALLKRAFT Model: ULMS 420 Item no.: 3627420 Condition: New machine Cutting area (square): 120 x 120 mm Speed: 2900 rpm Iedotuch Eopfx Apneat equipped as standard with: - Saw blade 420 x 30 x 4.0 mm Z 120 - minimum quantity lubrication system - Compressed air gun and spiral hose - Two extraction sockets for connection to an extraction system - Operating instructions

Condition: used, Year of construction: 2017, capacity 90 degrees: round 120 mm capacity 90 degrees: square 105 mm capacity 90 degrees: flat 180x70 mm 110 mm 95 mm 135x60 mm 120 mm 100 mm 135x60 mm 180 mm dimensions of saw-blade 350x32x3,4 mm Iasdpfx Aoy Ruvbopnjt turning speeds 1700/3400 U/min weight of the machine ca. 600 kg

Condition: used, Year of construction: 1998, machine/vehicle number: 01694001/8101120034, functionality: unexamined, power: 2 kW (2.72 HP), input voltage: 380 V, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 83 mm, cutting width (max.): 690 mm, saw blade diameter: 250 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, actuation type: manual, rotational speed (max.): 4,400 rpm, rotational speed (min.): 4,400 rpm, Equipment: CE marking, Metabo Table Saw Tk U 1693 D Maximum cutting height: 83 mm, Maximum saw blade diameter: 250 mm, Motor: 2 kW, 380 V, 50 Hz, Sliding table length: 1800 mm, Maximum rip capacity at parallel fence: 690 mm, Iodpfx Apey N Srkjnsat Sold as inspected at location Seevetal, Without transport, subject to prior sale.

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw ts 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, tilting capability 0° to 45°, 4 kW (5.4 HP) motor, 2,000 mm sliding table, lifting and transport device, foldable table extension, tenoning attachment, SUVA saw blade guard, GS wood dust tested with CE mark, as inspected at location Seevetal, without transport, subject to prior sale. Iodpfsy N Sfqsx Apnjat

Condition: new, Year of construction: 2025, functionality: fully functional, total length: 1,000 mm, total width: 600 mm, total height: 1,400 mm, cutting range round steel at 45°: 90 mm, cutting height (max.): 105 mm, saw drive: 4,700 W, empty load weight: 200 kg, COSEN CIRCULAR SAWS MANUAL MC-315 These circular saws are new in the COSEN portfolio, and are available in manual, which means you have to pull the lever down to cut. Iasdpfx Asv R Dxaepnjt Technical features: Compact, pedestal-mounted, hand-operated circular saws can be easily handled in the workshop or even on factories. Hand-operated vise Heavy duty motor Robust construction Low voltage on/off switch 45° and 90° bevel cutting Two cutting speeds Electric coolant pump with tank COSEN MC-315 CURRENT POWER: 400V DISC DIAMETER: 315 mm MOTOR CAPACITY: 4.7 kW DIMENSIONS: 1000 x 600 x 1400 mm WEIGHT: 200 kg RPM 45/90 RPM MAXIMUM CUTTING CAPACITY ROUND MATERIAL 90°: 105 mm; 45°: 90 mm SQUARE MATERIAL 90°: 85 x 85 mm; 45°: 80 x 80 mm RECTANGULAR MATERIAL 90°: 120 x 60 mm; 45°: 90 x 60 mm Price is EXW (Stock Europe), Include loaded on truck. Transport, installation, commissioning, training, and yearly service contracts are available upon request for an additional fee. Installation and training is always done by our high qualified Service team in 3 locations in Europe. Netherlands, Germany, Romania.

Condition: ready for operation (used), Year of construction: 2016, functionality: fully functional, saw blade diameter: 350 mm, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, cutting length (max.): 3,200 mm, intake manifold diameter: 120 mm, TECHNICAL DETAILS Max. cutting length: 3,200 mm Saw blade diameter min.: 300 mm Iaodoy Ai U Aspfx Apnjt Saw blade diameter max.: 350 mm Saw blade bore diameter: 30 mm Dust extraction nozzle diameter: 120 mm Max. spindle speed: 4,000 rpm (automatically adjustable) MACHINE DETAILS Voltage: 400 V Power consumption: 18.5 A Fuse: 25 A Transport packages: 2

Condition: new, Year of construction: 2025, New machine Year of manufacture: 2025 Features and technical data: Technical specifications: Main saw blade diameter (mm): 550 Panel cutting with pull-out fence and sliding table 3200 mm: 3200x3200 Saw blade tilt (degrees): 46 Max. cutting height at 90° (mm): 200 Max. cutting height at 45° (mm): 130 Saw blade speed (rpm): 2500-3500-5000 Scoring blade speed (rpm): 8500 - Extraction port diameter: - on frame: 120 mm - on saw blade guard: 100 mm Main motor power [S6 -40%] Hz50 kW: 7 Scoring blade motor power [S6 -40%] Hz50 kW: 9 Cutting width at rip fence (mm): 1000 Standard equipment and accessories: - Optimizer/processing control app for tablets: SCM Thundercut The app can be downloaded from the App Store or Play Store on tablets compatible with iPadOS or Android. It can be activated using the QR code supplied with the machine. The app enables you to: * Manage the machinery fleet and materials or panel stock * Create and edit projects, import projects from main furniture design software (file format "cpout"), and import cutting lists * Optimize cutting lists by selecting one or more proposals from the app’s integrated optimization software * Properly set up the machine for each cut, thanks to the simple and intuitive graphics of the 3D sequencer that guide the operator through every step * Print barcode labels for marking different parts via Bluetooth with compatible label printers - 10-year warranty on the sliding carriage system - Maximum saw blade diameter: * Up to 450 mm with scoring saw blade mounted * Up to 550 mm without scoring saw blade - eye-S 15" electronic control system including: * 15" touchscreen monitor * Direct control of the following axes in manual, semi-automatic, automatic, and incremental modes: - Main saw blade height adjustment - Saw unit tilt adjustment - Rip fence adjustment - Scoring blade height and lateral adjustment (the scorer is automatically raised to the set position when switched on and lowered when switched off) * Operator assistance functions for complex cutting operations * Storage capability for up to 1000 programs with corresponding images * Storage for up to 1000 different tools with corresponding images * Cutting sequence management for preloaded parametric machining programs * Environment for creating and storing new sequenced working programs * Automatic acquisition of working dimensions from the Thundercut App * USB port * Prepared for network connection - Auxiliary function of the electronic control system, including: * Determination of the correct stop position on the longitudinal fence for panel machining with tilted saw blade Iaodpsxavrgsfx Apnet * Determination of the correct stop position on the longitudinal fence for angle cuts with the mitre fence on the work table with or without tilted saw blade - Swivelling control panel above table

Condition: good (used), Year of construction: 1998, machine/vehicle number: 3585, Offer 25255 Technical data: - Saw blade diameter up to 300 mm - Saw blade feed via hand lever - Maximum vise opening width: 145 mm - Cutting capacity with saw blade diameter 300 mm: - At 90°: round 95 mm flat 125 x 90 mm - At 45°: round 95 mm flat 95 x 85 mm - Mitre adjustment: left up to 30° / right up to 45° - Saw blade speeds: 20 and 40 rpm - Drive: 400 V / 1.6 / 2.1 kW - Coolant system - Discharge roller table: 1500 mm - Required space approx. W 600 x H 2000 x D 800 mm - Weight approx. 250 kg Iajdpfx Apsy R Ablsnst

Condition: good (used), Year of construction: 2012, machine/vehicle number: 10004373, Offer 26126 Technical specifications: - Manual saw blade feed - Workpiece clamping via machine vice - Saw blade diameter up to 315 mm - 2 cutting speeds: 40 – 80 m/min Ijdpfxoy Rz S Ne Apneat - Cutting range at 90°: round 110 mm; rectangular 82 x 160 mm; square 82 x 82 mm - Miter cut at 45°: round 110 mm; rectangular 80 x 120 mm; square 82 x 82 mm - Drive: 400 V / 1.4 / 1.9 kW - Coolant system - Space requirements approx. W 600 x H 1600 x D 750 mm - Weight approx. 300 kg - Measuring stop: 3000 mm