Used Construction Circular Saw for sale (23,547)

Condition: used, Mitre Cold Circular Saw WMW (VEB GDR) Serial No. 189886 Year of manufacture: 1989 Saw blade diameter max. 300 mm Cutting range at 90° round approx. Ø 75 mm Square approx. 70 x 70 mm Cutting range at 45° round approx. Ø 55 mm Square approx. 50 x 50 mm Vice clamping width 100 mm Saw blade speed 31.5 rpm Motor power 0.37 kW Connection 230 Volt, 50 Hz - Mitre adjustment up to 45° - Material vice Hsdey Ra D Depfx Anljt - Mounted saw blade Ø 275 mm Dimensions (L x W x H) 600 x 600 x 700 mm Weight 47 kg Good condition

Condition: good (used), Year of construction: 2003, functionality: fully functional, Internal article number: 26081 Metal circular saw BIMAX TA 91-250 Year of manufacture: 2003 + Roller conveyor 2550mm + Coolant pump + Various saw blades Hjdszxgvaspfx Anljt + Operating manual / Electrical wiring diagram Control: Siemens Simatic OP7 Dimensions (L x W x H): 130 x 110 x 195cm Weight: approx. 1000 kg Dimensions of roller conveyor: 260 x 70 x 105cm The machine is fully functional and can be inspected while powered on, by arrangement, in our heated warehouse covering an area of over 500 m².

Condition: good (used), construction circular saw, circular saw -Engine power: 2.6 KW Hodpfx Aed R N Insnlot -Voltage: 220 volts -Dimensions: 885/670/H810 mm -Weight: 42 kg

Condition: used, Miter chop saw for aluminum (special machine construction with 4 servomotors) Circular saw, miter saw, crosscut saw Year of construction: 2002 Saw blade diameter: 500 mm Cutting range at 90°: Round Ø 180 Rectangle 350 x 140 mm (through crosscut) Cutting range at 45°: Round Ø 180 Rectangle 350 x 100 mm (through crosscut) Base carriage guide length: 1100 mm Travel on the base carriage (forward/backward): 650 mm Travel on the stand (up/down): 120 mm Saw blade speed: approx. 3000 rpm Motor power: 2.2 kW Power connection: 400 volts, 50 Hz - Controlled crosscut movement - Controlled saw blade height adjustment - Controlled miter cut through pivoting saw head - Controlled miter cut through tilting saw head - Pivoting and tilting of the saw via INDRAMAT servomotors with precision gearbox (Motor MKDO71B-061-KG1-KN and MKDO41B-144-KP1-KN) - Axis movement perpendicular via INDRAMAT servomotors and ball screw spindles (Motor MKDO41B-144-KP1-KN) - A total of 4 Indramat servomotors are installed - Very good German machine engineering Space requirement: L x W x H 1150 x 1100 x 1400 mm Weight: approx. 360 kg Good condition This unit comes from a special machine for specific products. All other components and electrical parts for the construction of a new special machine are also available. Hjdpfx Ajdzp T Dsnlot

Condition: used, Graule Type ZS 135 N crosscut and mitre circular saw for precise cross-cutting and mitre cutting of solid timber, mouldings and profiles with a high cutting height. It can be swivelled and tilted. Its robust construction and precise angle adjustment enable clean and repeatable cuts in craft work and workshop production. Ideal for all woodworking businesses. Includes base frame. Cutting height ~ 135 mm Cutting length ~ 460 mm Hjdpfxozrywqo Anlot Technical data: - Motor: 2 kW - Connection: 380 V

Condition: used, Year of construction: 1995, machine/vehicle number: 20373, functionality: unexamined, power: 4 kW (5.44 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, saw blade diameter: 315 mm, tilt adjustment saw blade: 45 °, height adjustment type: mechanical, saw blade bore: 30 mm, rotational speed (max.): 4,000 rpm, rotational speed (min.): 4,000 rpm, overall weight: 127 kg, table height: 850 mm, Equipment: CE marking, saw blade guard, Scheppach table saw ts 4000, max. cutting height 90 mm, at 45° max. 60 mm, max. saw blade diameter 315 mm, tilting capability 0° to 45°, 4 kW (5.4 HP) motor, 2,000 mm sliding table, lifting and transport device, foldable table extension, tenoning attachment, SUVA saw blade guard, GS wood dust tested with CE mark, as inspected at location Seevetal, without transport, subject to prior sale. Hedpfx Ansy N Sfqeljt

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, power: 7.5 kW (10.20 HP), cutting height (max.): 200 mm, cutting width (max.): 1,450 mm, saw blade diameter: 550 mm, rotational speed (max.): 4,800 rpm, rotational speed (min.): 2,800 rpm, overall weight: 1,280 kg, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 200 mm, cutting width at rip fence: 140 mm, table length: 3,200 mm, Equipment: motor brake, scorer, Heavy-duty panel saw with scoring unit and Siemens three-axis control system Exhibition machine with full warranty Hsdovmfawjpfx Anlst Hanging control panel with Siemens control and a large 10" touchscreen Control of saw blade height/tilt and positioning of the parallel fence via the control panel Max. cutting height 200 mm Scoring unit with separate drive motor Main saw blade with belt drive and speeds of 2800/3665/4800 rpm High self-weight ensures vibration-free operation Large cantilever table with material roller Extendable aluminum rip fence with three folding stops and digital position display 7.5 kW main motor mounted on a robust cast iron frame Four-bearing format sliding table with double roller carriage made of anodized aluminum with high torsional rigidity Multiple locking on the sliding table Standard equipment includes table extension and table lengthening made of steel sheet Large pendulum guard can be easily raised using a gas spring Saw blade clamping via a tool-free rapid clamping system The panel saw is assembled in our demonstration center in Chemnitz. It is new and in unused condition. We will be happy to assist with transport, assembly, and training.

Condition: used, Large A. Recker ATS-type mobile timber circular saw for various sawing tasks in workshops or on construction sites. Hjdezryvmspfx Anlst

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Kaltenbach KKS 450 U metal cutting circular saw (2021) Manufacturer: Kaltenbach Type: KKS 450 U Year of manufacture: 2021 Hodpfszwhwvjx Anlet Condition: used, very good Clamping, sawing, retraction, opening – all easily controlled with the push of a button Semi-automatic miter circular saw Working range 150 mm Saw blade diameter up to 450 mm Miter adjustment 180° Adjustment of the cutting height via push button Two cutting speeds Scope of delivery: - Documentation - 2m infeed roller conveyor - 2m outfeed roller conveyor with digital material stop - 2x saw blades

Condition: like new (used), Kaltenbach TL 350, manufactured in 1993, but used very rarely! Aluminum circular saw with manual feed and manual vertical clamping device. According to Kaltenbach documentation, the technical specifications of the TL 350 are: Saw blade: Ø 350 mm Hodozww A Uepfx Anlot Motor power: 2.0 kW Cutting speed: 3,200 m/min Cutting range 90°: round 115 mm, square 100 mm, flat 250 × 40 mm Cutting range 45°: round 115 mm, square 100 mm, flat 190 × 40 mm Mitre angle: −45° to +30° Weight: approx. 68 kg Dimensions: approx. 450 × 840 × 750 mm Working height with base: approx. 1,008 mm A new saw blade is included!

Condition: used, Miter saw, aluminum circular saw, aluminum semi-automatic circular saw, miter saw, glass bead saw -Processing of: flat, angle and solid material, pipes and special profiles -Saw blade: Ø 400 mm -Saw blade: swiveling -Drive: 2.5 kW -Speed: 2800 rpm -pneumatic material tension -pneumatic feed -with: chip extraction Hodpoc Ir Dvefx Anljt -Dimensions: 1100/900/H1160 mm -Weight: 238 kg

Condition: excellent (used), Year of construction: 1987, Circular saw Manufacturer: Ulmia Type: 1712 Year of manufacture: 1987 Table: 800 x 710 mm Saw blade diameter: 350 mm Cutting height: 125 mm Power: 3 kW Bevel angle: 45° Motor brake: Yes Hodpfx Aneztnx Eelot Weight: approx. 500 kg

Condition: excellent (used), Year of construction: 1982, Ulmia table saw Type 1710 S Make No. 2943 Year of manufacture 1982 With sliding table Swivel saw blade Saw blade maximum diameter 250 mm Maximum cutting height 75 mm at 90° Maximum cutting height 52 mm at 45° Motor power 2.2 kW Sliding table Sliding table travel 750 mm Height to top edge of table 850 mm Suction connection diameter 100 mm Weight: 121 kg Location: ex stock 54634 Bitburg Hsdpfx Anor Elmwslst - immediately available -

Condition: used, Flotjet 2000 table-type circular saw, model 480003, for precise rip, cross and mitre cuts in small pieces of solid timber, sheet materials and plastic. The robust construction, the swivelling table and the integrated sliding table enable flexible and precise workpiece guidance and high cutting accuracy. Suitable for furniture making, interior fit-out and craft workshops. Technical data: Hjdpfx Anezrywkjlet - Pitch: ~ 650 mm - Cutting width: ~ 170 mm - Cutting height: ~ 40 mm

Condition: good (used), Year of construction: 2011, machine/vehicle number: 1612124593, Offer 26309 Technical Data: - Saw blade dimensions: 280 x 3.8 x 40 mm Hedpfx Aezw Datenljt - Saw blade speed: 3200 rpm - Cutting range at 90°: approx. 100 x 70 mm - 200 x 40 mm - Miter angle adjustable: Left: 0 - 90° - Right: 0 - 45° - Compressed air connection: 6 - 8 bar - Air consumption per working cycle: 10 L/min - Drive: 400 V / 0.74 kW - Space requirement: approx. W 650 x H 1100 x D 750 mm - Weight: approx. 120 kg - Includes: - Pneumatic vertical clamping device - Pneumatic coolant spray device - Infeed roller conveyor: 2500 mm - Outfeed roller conveyor with stop and - Digital position indicator: 3000 mm

Condition: used, Year of construction: 1995, saw blade diameter 315 mm cutting diameter 100 mm cutting speed 40 / 80 U/min total power requirement 1,2 kW weight of the machine ca. 0,3 t dimensions of the machine ca. 0,8 x 0,6 x 1,65 m Hodpfozxt Nmjx Anlst

Condition: new, saw blade diameter 420 x Ø 40 mm cutting diameter 170 mm cutting length 410 mm dimensions of saw-blade 420x3,2/2,4x40 mm turning speeds 3500 U/min Dust suction hood 100 mm total power requirement 3,0 kW weight of the machine ca. 120 kg dimensions of the machine ca. 1300 x 800 x 1600 mm - Cross-cut and miter saws for cross-cut cuts - Miter adjustment on both sides (60 ° / 45 °), with fixed stop - Shifter cut on both sides 45 °, with fixed stop - Stable cast iron construction - Precise linear bushing guide on the tool slide hardened and ground steel shafts - manual saw feed - Saw blade infinitely adjustable in height - nozzle for opt. Suction Cutting data: - Cutting length at 90 ° = 410 mm - Cutting height at 90 ° = 170 mm - Cutting length at 45 ° = 290 mm - Cutting height at 45 ° = 115 mm Special accessories included: - Adjustment of shifter cut via hand crank, both. adjustable (45 ° / 45 °) - HM circular saw blade 420x3.2 / 2.6x40 mm Z = 108 FTZ neg. For aluminum and plastic - hydraulic feed brake, infinitely adjustable - pneumatic material clamping from above consisting of: Hsdpfxsxabzte Anlst 2 vertical clamping cylinders, adjustable, with hand lever valve - machine stand

Condition: new, Circular saw automation system Profilma 502, representative of the diverse "Profilma" series ideal for window and facade construction, automotive industry, machine and plant engineering, photovoltaics/solar, etc. • for aluminum and plastic profiles • fully automatic operation • Siemens S7 control with touch display, including piece counter • Error diagnosis including IXON router for VPN connection • Batch multiplier for the use of material bundles • Cycle time indication in seconds • for use with Ø 550 mm saw blades • Drive 7.5 kW, S6, 400 V, 50 Hz, 2,850 rpm • motorized saw feed, sawing cut from below • Cutting splitter extension on both sides of the saw blade • Material feed unit with ball screw spindle and servomotor • Feed length: 3 - 800 mm • Feed slide with adjustable support roller • Reversing mechanism up to a section length of max. 4.0 m • Automatic shutdown via limit switches at the end of the material Hjdpfxezlr Rcj Anlet • Remnant piece from 75 mm (depending on the profile) The basic machine is also available as a sawing, drilling, and threading automation system or as a sawing and punching automation system. They complete your orders quickly and efficiently with precision and high production volumes. Further circular saw automation systems are also available for larger profile dimensions or cost-intensive workpiece materials, and are part of the proven Pressta-Eisele standard range. Based on your processing requirements, we will be happy to advise you!

Condition: good (used), Year of construction: 2016, saw blade diameter: 600 mm, type of input current: three-phase, operating pressure: 8 bar, Industrial aluminum sawing machine that saws automatically, using pneumatic 2-button operation, and where the workpiece is clamped pneumatically on both sides. The clamping is adjustable both horizontally and vertically. Furthermore, this sawing machine is equipped with a mist lubrication system, which improves the sawing process. The saw blade feed is adjustable on this machine. Features: Hedszf U Tmspfx Anlet - Automatic sawing motion - Double pneumatic clamping - Saw blade moves from bottom to top - Solid carbide saw blade - Adjustable sawing speed - Length stop - Lubrication and reduction system - Atomization system - Air gun - Miter sawing - Automatic sawing and manual sawing The machine is installed and delivered assembled. Testing is possible.

Condition: used, Year of construction: 2018, saw blade diameter 550 mm Under-table saw for aluminum and PVC Hodszvhm Uopfx Anljt Hydropneumatic saw blade feed Two-hand operation Minimum-quantity lubrication system Table rotates on both sides, with locking positions at +/-45° and +/-60° Mitre cuts up to 60° on both sides Full protective guard very good condition!

Condition: good (used), Year of construction: 2010, Sawblade tiltable 46 ° Length of the rolling table 3000 mm cutting width 1300 mm Motor output 5,5 kW Hodpfxjzu Tlas Anlst Cutting height 204 mm Saw blade diameter 550 mm Speed 2000-6000 U/min. weight of the machine ca. 1300 kg

Condition: used, Year of construction: 2021, machine/vehicle number: 210907, saw blade diameter: 600 mm, Tronzadoras mitre saw Automatic sawing cycle Manual safety cover Hydro-pneumatic saw feed Adjustable rear stop Hjdpfx Aeyu Huvsnlet Saw blade diameter: 600 mm Cooling/lubrication system Angle adjustment: -22.5º to +135º

Condition: excellent (used), Catalogue number 7940 TECHNICAL DATA - Max. saw blade diameter: 500mm - Spindle diameter: 30mm Hjdpfx Aeztzc Donljt - Blade guard included - Hydraulic blade feed - Cutting height: 140mm - Main motor: 4.4kW - Table size (L/W): 570x870mm - Table height from base: 750mm - Roller tables: 2 pcs - Infeed roller table: 1170mm – Outfeed roller table: 1210mm - Sliding roller width: 600mm - Overall dimensions (without roller tables) L/W/H: 1040x820x900mm - Weight: approx. 570kg ADVANTAGES – Made in Germany – 2 roller tables – Pneumatic saw blade stroke – Used saw in perfect condition Net price: 13,900 PLN Net price: 3,300 EUR (based on exchange rate of 4.2 EUR) (Prices may change with significant fluctuations)

Condition: new, Year of construction: 2026, Saw Diameter: 500 mm Motor Power: 4 kW Cutting Range of the 500 mm Diameter Circular Saw Cutting Capacity 0° (square) for solid material: 170 x 170 mm Cutting Capacity -45° (square) for solid material: 160 x 160 mm Cutting Capacity +45° (square) for solid material: 160 x 160 mm Cutting Angle: -67.5°, -45°, -30°, -22.5°, -15°, 0°, 15°, 22.5°, 30°, 45° Dimensions (without feeders): Width 825 mm x Depth 1074 mm x Height 1397 mm Hjdpfx Aexdciajnljt Saw Speed: 3000 rpm Motor: 4 kW, 50 Hz, 400V AC, three-phase (3PPE) power supply Machine weight: 220 kg Cutting disc diameter: 500 mm Cutting disc bore diameter: 32 mm Operating pressure in the pneumatic system: 6–8 bar Cooling system: The machine is equipped with an oil mist system to cool the cutting blade, which increases the tool's durability and performance. Note: A coolant tank is not included and must be installed by the customer.

Condition: good (used), Year of construction: 1992, Panel saw with strip curtain Hsdpfx Anezq Rh Dolet max. cutting length 4200 mm max. cutting width approximately 1000 mm Motor 11 kW with electric width adjustment and digital display for width stop new strips will be supplied available at the location in working condition