Used Bridge Saw for sale (6,585)

Year of construction: 2003, condition: good (used), functionality: fully functional, Selling GMM Eura bridge saw in good working condition. Mitre cuts. Table 35000x1850 lifts and rotate. Available in january 2027. Djde Ahq Udopfx Aizswd Max blade D625. Flange 210mm. Max cut depth 200mm. Axis O sladge 3500 Axis X translation 3500 Axis Y up and down 320 Power 20kw

Year of construction: 1994, condition: used, functionality: unexamined, We are selling a used, traditional bridge saw, type Zambon Rover 35, manufactured and installed in 1994. The machine is in excellent, freshly renovated condition, both mechanically and visually. The bridge consists of solid, heavy-duty cast iron and is mounted on two concrete support walls on sliding rails. The total weight of the machine with table is 5800 kg. Further technical data: saw blade motor 18.5 kW / 380V / 50Hz, two speeds 1460/2930 through belt drive, pivoting support 0-90° for miter cuts, carriage with 300 mm electric height adjustment, blade diameter 350 - max 800 mm, which allows a cutting depth of 18.5 cm, cutting length 3500 mm, bridge travel 4700 mm. The machine is programmed and operated via the pivoting and hydraulically vertically adjustable control panel and the switches installed in it, and via the 2-axis control system EM760.55. Up to 99 cutting widths can be programmed with repetition, a granite lowering automatic can be set, and there is a profile program. However, the machine can also be operated in manual mode without the automatic function. The feed of the carriage and the bridge is done by hydraulic drive, the bridge travel by handwheel with scale. We have all the documents for the machine, from the purchase to the operating instructions, as well as complete records of repairs and accessories, and the complete foundation plans. The machine includes a heavy-duty cast iron table 3500x200 mm, load-bearing up to 5 tons, with tiltable support frames with wooden cladding. The table can be rotated by hand and fixed at 90° and 45°, and can also be hydraulically raised by 500 mm. The problem: 1) The machine has an electrical defect, which means that the carriage cannot be moved at the moment. The cause, which should not be major, must be found by the buyer. 2) The table is anchored to the ground with a cylinder up to about 2 m. This can be lifted out, but it will not stand on its own because of the tall cylinder. It is questionable whether the counterpart in the ground can still be removed. For this reason, and because of the costly effort involved in creating the foundation for the table, we recommend installing a different table. Terms of sale: The stated price is therefore only for the machine and does not include the table, but the table can be taken away free of charge. The machine is still assembled and can be inspected by arrangement, but cannot be demonstrated due to the described defect. The sale is ex works, and the buyer is responsible for organizing the disassembly and transport. Assistance can be provided during disassembly, and a crane is available for disassembly and loading. Dsdpfj Aarlyex Aizswd

Condition: used, Year of construction: 2008, functionality: fully functional, manual in images. This is a 5 head horizontal Band Saw. It has tilting heads making it ideal for Feather Edge board production. It has 18KW motors. Dwjdpfezwh Rcox Aizod This machine comes with its own saw sharpening equipment and 10 new blades. All power feed wheels have been replaced with new. It runs on 30mm blades. All new power feed sprockets and fully DC braked.

Condition: ready for operation (used), Year of construction: 1995, machine/vehicle number: 060-8433, Cutting length: 3,500 mm Dwedpfx Aiszl Hhvezsd Support carriage travel: 3,800 mm Bridge carriage travel: 3,500 mm Vertical adjustment: 400 mm Cutting wheel diameter: 625 mm Maximum cutting depth: 210 mm Blade drive motor: 12 kW, 2 speeds: 950 and 1,450 rpm Rotary table Laser

Year of construction: 2018, operating hours: 3,758 h, condition: excellent (used), functionality: fully functional, machine/vehicle number: 5156, GMM rotating head bridge saw with vacuum separator Support travel distance: 3600 mm Support height adjustment: 700 mm Extension of bridge rails Y-axis to 5400 mm Maximum blade diameter: 825 mm for cutting depth approx. 300 mm Saw motor power: 23.5 kW Stepless speed control: 800 - 6000 rpm Tilting table with hydraulic tilt: 3500 mm x 2000 mm Table extension: 3500 mm x 430 mm Saw table with rubber table covering Removable table stops Vacuum lifter for automatic separation of workpieces Camera Automatic material measurement Automatic tool measurement Dedpfx Ajy Iu Rasizowd Central lubrication Air conditioning GMM software including: - Milling - Drilling - Profiles - MiniCad - Cuts from CAD - Parametric shapes

Year of construction: 1994, condition: used, We offer this used F. Zambon Rover 35 bridge saw, year of construction 1994. Manufacturer: F. Zambon Model: Rover 35 Year of manufacture: 1994 Condition: used Djdpfx Aieyuuudezewd Category ID: 431 Type: Bridge saw If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2014, functionality: fully functional, ELCON Automatic Multiwall Sheet Cutting Machine LANCET 215 For vertical and horizontal cutting of multiwall sheets with a rigid blade! Technical Specifications: Cutting Height: 2,150 mm Dwsdpfxoyymhue Aized Cutting Length: 7,300 mm Cutting Depth: 50 mm Required Air Pressure: 6 bar Dimension setting for horizontal cuts: electronically adjustable via touchscreen Dimension setting for vertical cuts: via scale from 0–1,300 mm Feed rate: continuously adjustable from 0 to 60 m/min. Features: Solid, enclosed rear wall with felt support (new) Aluminum material support table Right-hand, pneumatically retractable material stop Pressure device for vertical cuts with adjustable pressure Lower pneumatic sheet clamping device per meter of cutting length Pneumatically retractable blade Pneumatically swiveling blade

Year of construction: 2013, condition: excellent (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the support for maximum cutting precision; Water collection tray with built-in water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Dwsdpfx Aiei Akvvjzed Location: in stock at warehouse 54634 Bitburg - immediately available -

Condition: used, Year of construction: 2008, functionality: fully functional, total length: 4,500 mm, total width: 7,000 mm, cutting length (max.): 3,500 mm, cutting width (max.): 2,000 mm, feed rate X-axis: 60,000 m/min, feed rate Y-axis: 40,000 m/min, feed rate Z-axis: 20,000 m/min, spindle motor power: 17,000 W, Numerical control cutting centre with 4 interpolated axes, fixed worktable and twist head; the machine is specially engineered to cut/ shape (either in the plunge-cut or step-cut mode) items of granite, marble, engineered stone and suchlike. Dwsdovtdztopfx Aized

Year of construction: 2009, condition: used, GMM rotating head bridge saw with 5 working axes. Djdpezz Nukefx Aizjwd Automatic rotating support, 0-90°. Automatic rotating head, 0-370°. Maximum blade diameter: 625 mm. Saw motor power: 23.5 kW. Tilting table with hydraulic tilt: 3500 mm x 2000 mm. Camera. 15″ Touchscreen. Laser.

Condition: used, Year of construction: 2016, IceTech SAW – Industrial Dry Ice Block Saw with Conveyor – 2016 Two units. Price is €6600 per unit. IceTech industrial sawing machine for cutting preformed dry ice blocks and slabs into smaller pieces. The machine features a stainless steel enclosure, an integrated conveyor, and a Beckhoff operator panel. It is equipped with an enclosed cutting section, an emergency stop button, and adjustable leveling feet. This is an option for dry ice producers and businesses looking for equipment for a dry ice processing or packaging line. Suitability for the required block format and production layout should be checked. Technical specifications: • Manufacturer: IceTech, Denmark • Machine designation: SAW • Machine number: 512792 • Serial number: 2016-09-04 • Year of manufacture: 2016 • Machine weight: 330 kg • Electrical supply: 3 × 400 V AC • Frequency: 50/60 Hz • Nameplate current: 16 A • Maximum system pressure: 10 bar • Operator panel: Beckhoff • Integrated conveyor • Stainless steel enclosure ASCO dry ice saw, ASCO AAS, ASCO AAS01, ASCO Active Dry Ice Saw, ASCO Passive Saw, ASCO dry ice block cutter, ASCO dry ice cutting equipment, Tannewitz dry ice saw, Tannewitz dry ice bandsaw, Tannewitz 24 inch dry ice saw, Tannewitz 36 inch dry ice saw, Cold Jet dry ice equipment, ColdJet dry ice processing equipment, Cold Jet IceTech saw, IceTech dry ice block saw, PEHAKA dry ice saw, PEHAKA special purpose bandsaw, Dwjdpfx Aj Ahg Ebjized Dadaux ice saw, Dadaux bandsaw, Dadaux SX 350 KC, KC Tecnologia ice saw, KC Tecnologia SX 220, KC Tecnologia SX 350 KC, KC Tecnologia SX 400, KC Tecnologia C70, Big Block Cutter C70, BF TECH ice saw, BF Technology ice bandsaw, BF TECH C70, BF TECH ice block cutter, industrial dry ice block saw, dry ice slab cutting machine, dry ice slice cutter, solid CO2 cutting equipment, conveyor saw for dry ice blocks, used dry ice saw for sale, second-hand dry ice cutting machine, stainless steel ice bandsaw, industrial ice block cutting equipment. IceTech SAW, IceTech dry ice saw, IceTech 512792, dry ice block saw, dry ice cutting machine, dry ice block cutter, dry ice slab saw, dry ice slab cutter, dry ice slice cutter, dry ice portioning machine, solid CO2 saw, solid carbon dioxide cutting machine, industrial dry ice saw, conveyor dry ice saw, enclosed dry ice saw, dry ice processing equipment, dry ice production line equipment, dry ice packaging line equipment, dry ice block processing, dry ice slab processing, used dry ice equipment, second-hand dry ice saw, stainless steel dry ice saw, Beckhoff operator panel, dry ice machinery for sale.

Condition: used, Year of construction: 2021, functionality: fully functional, machine/vehicle number: 76020, travel distance X-axis: 3,800 mm, travel distance Y-axis: 2,700 mm, travel distance Z-axis: 320 mm, table width: 2,400 mm, table length: 3,800 mm, Breton Genya is the advanced cnc bridge saw for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen tops, vanity tops or claddings. The indicated price does not include disassembly and subsequent installation costs. Dedpfx Aijzrfadezowd

Condition: used, Year of construction: 2002, machine/vehicle number: 021203, Machine Name - Mega saw Machine Model - H1830 s.n 021203 Dodowxmhlepfx Aizowd Specification - Year 2002 3.7kw Main motor Semi- automatic 82- 250 FPM Variable speed control Max bar cutting size 460mm In-built coolant tank with pump and screw auger. Manual vice

Condition: new, functionality: fully functional, overall weight: 12,000 kg, total length: 8,100 mm, total width: 6,080 mm, total height: 5,500 mm, feed rate X-axis: 45 m/min, feed rate Y-axis: 45 m/min, feed rate Z-axis: 15 m/min, sheet thickness (max.): 140 mm, table length: 3,650 mm, table width: 2,150 mm, SPECIAL PRICE Breton Combi is the cnc bridge saw with waterjet for cutting marble, granite, quartz, ceramic, Lapitec slabs to create kitchen top, vanity tops and claddings Djdpfx Aiotynfgjzewd Price from €uro 250.000

Condition: used, Twin vertical band saw with log lengthener. Suitable for widths from 70mm to 200mm. Log length from 50cm up to 3.7 meters. Dwsdpfeyh Hc Rox Aized

Condition: ready for operation (used), Year of construction: 2002, machine/vehicle number: AY11051, functionality: fully functional, cutting height (max.): 330 mm, overall weight: 1,500 kg, saw band length: 5,385 mm, saw band width: 100 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS SAWING AREA Sawing direction: Vertical. No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Sawing direction: Vertical Cut to feed roller: max. 230 mm Cut to stop: max. 260 mm Cut width to column: max. 300 mm Total opening: max. 480 mm Cutting height: max. 330 mm Saw band width: max. 100 mm Saw band length: min. 5,385 mm Saw band length: max. 5,485 mm Saw band thickness: min. 0.8 mm Saw band thickness: max. 1 mm Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS & WEIGHT Dimensions (L x W x H): 2,000 x 950 x 2,400 mm Weight: 1,500 kg EQUIPMENT CE marking Max. cut to feed roller: 230 mm Max. cut to stop: 260 mm Max. cut width to column: 300 mm Max. total opening: 480 mm Max. cutting height: 330 mm SAW BAND Max. saw band width: 100 mm Min. saw band length: 5,385 mm Max. saw band length: 5,485 mm Min. saw band thickness: 0.8 mm Max. saw band thickness: 1 mm TABLE AND WHEELS Wheel diameter: 915 mm Table width: 1,010 mm Table length: 740 mm FEEDING AND DUST EXTRACTION Feed roller type: Manual Dust extraction port diameter: 150 mm MACHINE DETAILS GENERAL Year of manufacture: 2002 Color: Blue Serial number: AY11051 CE marking: Yes ELECTRICS AND DRIVE Main motor power: 15 kW Connected power: 15 kW Voltage: 400 V Current consumption: 28 A Fuse rating: 32 A DIMENSIONS AND WEIGHT Dodpfj Af Hk Uox Aizewd Overall length: 2,000 mm Overall width: 950 mm Overall height: 2,400 mm Weight: 1,500 kg

Condition: ready for operation (used), Year of construction: 2001, machine/vehicle number: ST001, functionality: fully functional, power: 18.4 kW (25.02 HP), overall weight: 9,500 kg, saw band length: 11,760 mm, saw band width: 67 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Dwodpfxj Af Hd Ie Aizjd Circular sawing capacity: 1,050 mm Saw band length: 11,760 mm Saw band width: 67 mm Saw band thickness: 1.6 mm Workpiece clamping: Hydraulic MACHINE DETAILS Control system: Conventional Power: 18.4 kW Dimensions & Weight Dimensions (L x W x H): 12,000 x 2,450 x 2,000 mm Unladen weight: 9,500 kg Number of transport packages: 2 EQUIPMENT CE marking 6-meter roller conveyor

Year of construction: 2013, condition: good (used), Robust and compact bridge saw with a fixed bridge for cutting stone tiles and slabs up to 800 mm in length: Special design of the carriage for maximum cutting precision; Water collection tray with integrated water circulation system for cooling the blade; Robust and compact construction. Roller conveyor at the front Roller conveyor at the rear Saw blade size: 350 mm Motor power: 2 kW Voltage: 230 volts Weight: 173 kg Mobile Location: in stock at warehouse 54634 Bitburg Dwsdpfx Aozu A N Ijizsd - immediately available -

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 5921 AU, functionality: fully functional, cutting height (max.): 2,200 mm, cutting width (max.): 6,200 mm, saw blade bore: 100 mm, overall weight: 640 kg, No minimum price – guaranteed sale to the highest bidder! Vertical panel saw with scoring device! TECHNICAL DETAILS Vertical cutting height: max. 2,200 mm Horizontal cutting height: max. 2,150 mm Cutting width: max. 6,200 mm Cutting depth: max. 55 mm Horizontal cutting: Yes Vertical cutting: Yes Saw blade diameter: min. 250 mm Saw blade diameter: max. 250 mm Saw blade arbor bore: 100 mm MACHINE DETAILS Voltage: 400 V Current consumption: 6.3 A Fuse rating: 16 A Power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 7,200 x 1,400 x 3,000 mm Weight: 640 kg Shipping packages: 1 unit EQUIPMENT CE marking Dodj Aidu Rspfx Aizswd

Condition: used, Year of construction: 2020, machine/vehicle number: 931/20 TS90, functionality: fully functional, operating hours: 50 h, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 30 A, input frequency: 50 Hz, type of input current: three-phase, cutting height (max.): 90 mm, cutting width (max.): 4,300 mm, overall weight: 3,500 kg, Equipment: CE marking, documentation/manual, saw blade guard, scorer, We offer this used Macmazza TS90 Beam Saw, year of construction 2020. Manufacturer: Macmazza Model: TS90 Year of construction: 2020 Condition: used Category ID: 1426 Type ID: 844 Type: Beam Saw 2020 MACMAZZA TS90 4300 × 4300 CNC BEAM SAW – ONLY 28 HOURS OF ACTUAL WORKING TIME Price: €39.900net – negotiable An exceptional opportunity to purchase a 2020 Macmazza TS90 automatic horizontal CNC beam saw with extremely low operating hours. The machine was originally supplied in the United Kingdom as an ex-demonstration machine and has subsequently seen very limited use in our bespoke joinery workshop. It is in excellent condition, fully operational and currently installed. RECORDED OPERATING DATA • Total Hours Machine in Operation: 49 hours 46 minutes • Total Hours Machine in Working: 28 hours 31 minutes • Total Saw Blade Cutting Distance: 571.5 metres • Total Production Recorded: 129.6 m³ All operating data can be verified directly through the machine’s control system. Dedszzdyzopfx Aizewd TECHNICAL SPECIFICATION • Manufacturer: Macmazza • Model: TS90 • Year of manufacture: 2020 • Serial number: 931/20 • Cutting length: 4,300 mm • Pusher stroke: 4,300 mm • Maximum cutting height: 90 mm • Installed power: 15 kW • Power supply: 400 V, 50 Hz, three-phase + N + PE • Control voltage: 24 V DC • Full-load current: 30 A • Machine weight: 3,500 kg • Computer-controlled operation • Integrated cutting optimisation software • Automatic rear pusher • Pneumatic grippers • Scoring unit • Air-float front supporting tables • CE marked ADDITIONAL ORIGINAL MACMAZZA GRIPPER The machine has been upgraded with an additional genuine Macmazza pneumatic gripper, supplied and professionally installed through R&J Machinery. The additional gripper and professional installation cost £2,685.90 + VAT. Supporting invoice available. CONDITION AND INSPECTION The machine is in excellent condition and has completed only 28 hours and 31 minutes of actual working time. It is currently installed and can be inspected and demonstrated under power by prior appointment. Further photographs, videos, operating-hour records, original documentation and invoices are available upon request for serious enquiries. LOCATION AND COLLECTION Located in Perivale, West London, United Kingdom. Sale terms: EXW – Ex Works. Dismantling, loading, transport and recommissioning are the responsibility of the purchaser. PRICE €39.900 net – negotiable Serious enquiries only. Please contact us to arrange an inspection or request further you have any questions or need more information, feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2016, Experience seamless operation with all movements meticulously controlled by NC technology, ensuring swift and precise cuts every time. Boasting CNC controlled cutting height as standard, this machine provides unmatched versatility and precision in your cutting operations. Tailored for the demands of the roof truss and timber frame industries, this 3-axis CNC upstroke crosscut saw sets the standard for accuracy and reliability with a 700mm saw blade and 7.5hp motor. Whether you're tackling compound angle cutting or executing long scarf cuts, the HMZ-3 delivers flawless results with every cut due to its large cutting height of up to 250mm and capability to handle even the most intricate cutting tasks. An onboard optimisation package is included which allows cutting lists to be test optimised against timber lengths to generate a pre-optimised cutting list. Specification 6000mm infeed capacity Dwodo Agnz Nepfx Aizsd Right-to-left feed orientation HM-Z saw unit with 700mm blade and centre-line cutting 4000mm outfeed table Onboard optimisation Outfeed monitor

Condition: used, machine/vehicle number: 008653, Max. panel width: 3200 mm Max. panel length: 3200 mm Dodozvwqcjpfx Aizjwd Main saw blade projection: 150 mm No of Grippers: 9

Condition: ready for operation (used), Year of construction: 2016, machine/vehicle number: 1.603.012, functionality: fully functional, cutting range round steel at 45°: 360 mm, cutting range round steel at 90°: 360 mm, saw band length: 5,200 mm, saw band width: 34 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Circular sawing capacity at 90°: 360 mm Circular sawing capacity at 45°: 360 mm Saw band length: 5,200 mm Saw band width: 34 mm Saw band thickness: 1.1 mm Saw type: Semi-automatic Orientation: Horizontal Miter saw: Yes Workpiece clamping: Hydraulic MACHINE DETAILS Power: 3.7 kW Dimensions & Weight Dimensions (L x W x H): 3,000 x 1,300 x 1,800 mm Djdpfxs Aidvco Aizswd Unladen weight: 1,585 kg Transport packages: 1 piece EQUIPMENT Digital display Chip collection tray Documentation CE marking

Condition: used, machine/vehicle number: 008567, Max. panel width: 3800 mm Max. panel length: 3800 mm Main saw blade projection: 75 mm No of Grippers: 6 Dedjzvwi Eepfx Aizswd

Condition: like new (used), Year of construction: 2022, machine/vehicle number: 2022/5/18, functionality: fully functional, rotational speed (max.): 2,800 rpm, overall weight: 480 kg, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Saw Blade I Saw blade diameter: 550 mm Bore diameter: 50 mm Djdo Ah Rh Ropfx Aizowd Motor power: 3 kW Operating voltage: 400 V Speed: 2,800 rpm Swivel range: -70° / 90° / 45° Saw Blade II Saw blade diameter: 350 mm Bore diameter: 40 mm Motor power: 2 kW Operating voltage: 400 V Speed: 2,800 rpm Stock dimensions: max. 210 × 100 mm Vertical cutting height: 150 mm MACHINE DETAILS Air connection: 8 bar Feed: pneumatic Dimensions & Weight Dimensions (W x D x H): 1,200 x 1,000 x 1,400 mm Weight: 480 kg EQUIPMENT Pneumatic feed with two-hand control Operating manual available