Used Bridge Saw for sale (6,270)

Condition: like new (used), Year of construction: 2023, operating hours: 1,809 h, functionality: fully functional, machine/vehicle number: 1559, saw blade diameter: 550 mm, feed length X-axis: 800 mm, total length: 2,400 mm, total width: 2,000 mm, total height: 1,800 mm, cutting range round steel at 90°: 190 mm, type of input current: three-phase, rotational speed (max.): 2,850 rpm, cutting height (max.): 150 mm, overall weight: 1,650 kg, section length (min.): 3 mm, section length (max.): 4,000 mm, saw blade speed: 2,850 rpm, input voltage: 400 V, saw drive: 7,500 W, cutting diameter: 270 mm, saw blade bore: 40 mm, Circular Saw Fully Automatic PROFILMA 502 + Chip Extraction Unit MG 3 ST Circular Saw Fully Automatic PROFILMA 502 1 69,430.00 69,430.00 Fully automatic operation, drive 7.5 kW, S6, 400 V, 50 Hz, 2850 RPM. For use with saw blades Ø 550 mm, cutting range 270 x 150 mm (width x height), Ø 190 mm. Max. profile width 270 mm, Siemens S7 control system with touch display including piece counter. Including CPU 315 and Flexisoft, piece count multiplier for bundle cutting operations. Cycle time indicated in seconds, chain dimension, including reversing device for section lengths up to 4 m max. Automatic shut-off via limit switch at end of workpiece, error diagnostics, including IXON router for VPN connection, see datasheet. Motorized saw blade feed, continuously adjustable, vertical and horizontal clamping from below upwards, feed and discharge side at the saw head, cutting gap expansion on both sides of the saw blade. Electronic material feed unit, 800 mm feed length, with ball screw and servomotor, including pneumatic horizontal and vertical clamping device. The profile support area in the feed section is equipped with a liftable/lowerable roller, remnant piece from 75 mm, depending on profile. Clamping pressure reduction horizontal and vertical with 6 pressure regulators, timed spray device with fill level monitoring and automatic shut-off, lubricant container 1 liter, noise protection package, frame internally lined with sound insulation mats. 2 extraction ports Ø 100 mm, safety guard above the saw head and feed unit, 740 mm roller conveyor with reach-in protection on the infeed side, 450 mm Pertinax table plate with reach-in protection on the discharge side. Chip Extraction Unit MG 3 Dust and chips are collected in a 172-liter metal container, which is detachable for easy emptying. 2 outlets with 100 mm hose adapters, without extraction hose, drive 3.0 kW, 400 V, 50 Hz, three-phase motor. Max. air flow rate 2,600 m³/h, vacuum 30 mbar, with fan snail housing above the extractor. Lhsdpfx Aey Dtpmjdtsf Large filter surface, pneumatic shaker unit for filter cleaning, filter class M, maximum noise level 80 dB(A). Selector switch for continuous operation or operation controlled by the saw, without power cable, paint finish: RAL 7035 / 9016.

Condition: used, Year of construction: 1999, Used machine Lhjdjy E Awiopfx Adtjf Year of manufacture: 1999 Equipment and technical data: to be provided Availability: short-term Location: 63934 Röllbach

Condition: excellent (used), Year of construction: 2003, functionality: fully functional, KASTOtec AC 4 Cutting Capacity Round: 430 mm Cutting Capacity Square H x W: 430 x 430 mm Cutting Capacity Flat H x W: 430 x 430 mm Clamping Range: 0 – 430 mm Smallest Workpiece Dimension: 10 x 10 mm Minimum Cut-off Length: 6 mm Shortest Remainder Length in Automatic Operation (only for geometrically flawless surfaces): 35 mm Shortest Remainder Length in Single Cut: 10 mm Dimensions and Weights: Length approx.: 2,140 mm Width incl. chip conveyor: 4,610 mm Height (saw frame lowered) approx.: 2,195 mm Height (saw frame at highest position) approx.: 2,410 mm Material Support Height: 700 mm Total Weight: 4,300 kg Year of Manufacture: 2003 Performance Data: Total Connected Load: 25 kW Saw Motor Power: 15 kW Drive Power at Flywheel: 14 kW Cutting Speed—stepless, 50/60 Hz version: 12 - 120 m/min Ljdpfxsy Dckms Adtshf Automatic Material Feed Length Single: 600 mm Saw Blade Dimensions: 6,830 x 41 x 1.3 mm Coolant Tank Capacity: 150 l KASTOtec AC 4 Fully hydraulic high-performance band saw in heavy-duty design Suitable for cutting round, square, flat material as well as tubes and profiles in all grades, especially for tool steels and difficult-to-machine materials such as titanium, Hastelloy, Inconel, etc. Machine Base Torsion-resistant welded construction Saw Unit of steel-mineral composite construction Saw Unit Guidance High-performance sawing technology requires backlash-free and low-maintenance guidance systems. Two vertical square guide columns, one linear guide unit with backlash-free set carriages, as well as two preloaded and adjustable rollers on a guide rail ensure high rigidity and cutting accuracy. Greater machining performance, shorter cutting times, higher blade life, and maintenance-free guide systems with high availability characterize the new KASTOtec. Saw Blade Guidance Side guides by hydraulically preloaded carbide slide guides with quick lift feature for fast blade changes. Back guide by oscillating carbide slide guides. Automatic adjustment of the movable blade guide according to the width of the material to be cut. Material Lift Device After cutting in automatic cycle, the workpiece is moved approx. 2 mm away from the blade on the feed side using the material lift device while clamped (increases blade life). Options for the Machine - Carbide package - Coolant monitoring - Blade tracking - Speed monitoring - Machine lamp - Roller conveyor - CNC control - Special chip conveyor - Carbide package Discharge Roller Conveyor for the KASTOtec AC 4 available in stock, dimensions: 1200 mm long, 500 mm support width, 6 transport rollers

Condition: new, Year of construction: 2026, We are offering this new Hartenberger HBS 96 S Hydraulic Bandsaw, year of manufacture 2026. Manufacturer: Hartenberger Model: HBS 96 S Hydraulic Year of manufacture: 2026 Condition: New Category ID: 937 Type ID: 1756 Machine type: Bandsaw (block saw) Main motor power: 11 kW Total power requirement: 12 kW (at full capacity) Supply voltage: 400 V, 50 Hz Saw head feed, electric (gear motor 0.55 kW) Saw head up/down, electric (gear motor 0.55 kW) Feed along the cutting head: infinitely adjustable 0-25 m/min Saw head clearance: 800 mm Saw blade: - Blade width: 32-42 mm - Blade length: 4004 mm (optional 4800 mm) - Kerf thickness: 1.5-2.5 mm Timber dimensions: Max. log diameter: 850 mm Standard length: 4800 mm Lhodpfoy Eq Snjx Adtof Weight: up to 3000 kg Hydraulics: Set of lateral supports 1st log clamp 1st support roller Log turning chain Dimensions: L/W/H: 6000/2000/1900 mm Weight (approx.): 1900 kg If you have any questions or require further information, please feel free to send us a message or give us a call.

Condition: good (used), Year of construction: 2008, Very neat semi-automatic bandsaw from Imet Type: BS 350 SHI 2SP Capacity: 350 x 270 mm Material probe Lsdoywwi Depfx Adtohf Double-sided mitre cutting Mist and coolant lubrication

Condition: excellent (used), Year of construction: 1998, Cutting width 508 mm Cutting height 305 mm Table size 600 x 560 mm Working height 1000 mm Ledpfsvkx H Ejx Adtehf Roll diameter 515 mm Cutting speed 20 - 1000 m/min Saw blade width 3 - 25 mm Saw blade length 3975 mm Saw blade thickness 0.65 - 0.9 mm Drive power 1.5 kW Dimensions L x W x H 950 x 770 x 2000 mm Weight 510 kg Accessories / Special features: • Butt band welding device (only suitable for carbon band saw blades up to 0.65 mm wide and not for bi-metal M 42!) • Continuously variable cutting speed • Digital display for the cutting speed • Support table can be swiveled in 2 levels Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: used, Year of construction: 1972, 1 used, well-preserved hydro-pneumatic semi-automatic cold circular sawing machine for cutting aluminum, non-ferrous metals, wood and plastic Technical data: max. saw blade diameter 370 mm Cutting diameter 120 mm Lhedobwl Emjpfx Adtof Cutting range at 90 degrees: flat 260 x 60 mm Cutting range at 90 degrees: square 105 mm Cutting range at 45 degrees: flat 200 x 45 mm Cutting range at 45 degrees: square 90 mm 0° cut - longitudinal cut: yes 2 speeds 1500 / 3000 m/min Drive cable 1.7 / 2.6 kW Machine dimensions L x W x H 1000 x 1000 x 1700 mm Machine weight 700 kg Accessories / Special features: - Semi-automatic operation: After starting, the workpiece is automatically clamped with the upper clamping cylinder. Once the set feed end has been reached, the saw blade moves down automatically and the clamping vice is released. - Stepless feed - Pole-changing motor - 1 saw blade - Mitre cut on both sides - Longitudinal cut 0° - Spray lever device Special accessories: - 1 roller table right with heavy stop 3500 mm and scale - 1 roller table left, approx. 3500 mm Special accessory price: € 1,500.00 plus VAT. Siegfried Volz Machine Tools Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: ready for operation (used), Year of construction: 1987, machine/vehicle number: 402, functionality: fully functional, cutting height (max.): 70 mm, cutting width (max.): 3,200 mm, saw blade diameter: 300 mm, cutting length (max.): 3,200 mm, cutting height with scoring (max.): 70 mm, Equipment: scorer, Cutting length: 3200 mm Cutting width: 3200 mm Width stop: Gear motor adjustment Lhedpfx Aovi H Dijdtjf Main saw unit: saw blade Ø 300, Ø 30, Z=60, SH 70 Scoring unit: yes - saw blade Ø 125, Ø 20, Z=24 Softforming unit: no Side pressure unit: yes - Version: FR 50/100 Residual cutting device: yes - Pressure beam recess Veneer cutting device: yes Trimming device: yes - Spacing: 145/525/1790 Support table front: 400 x 1400 mm - 2 pieces Rear support table: 240 x 2960 mm - 1 piece Support bars rear: 40 x 2960 mm - 5 pieces Angled table: 480 x 1400 mm left Angle ruler: with pull-out Collets: 4 pieces - floating - distance 70/400/1600/2800 Stop jaw: 2 pieces - rigid - distance 1000/2200 additional foot at the rear : no - 3 feet safety guard: yes foot switch : no Machine cuts from: left to right unit can emerge in any area: no automatic lowering with saw overtravel: no 3-step cutting height adjustment: no Main circular saw: 7.5 kW, 380 V, 2870 rpm, 50 Hz Scoring saw: 1.1 kW, 380 V, 2800 rpm, 50 Hz Width stop adjustment motor with torque compensation: fine input motor: 0.12 kW, 380 V, 1380 /min, main motor: 0.35 kW, 380 V, 1350n.

Condition: used, Year of construction: 2007, machine/vehicle number: MR000798, Used circular saw with right-side extension and rear outfeed table. Technical specifications: - Maximum cutting width to rip fence: 1250 mm - Maximum saw blade diameter: 450 mm - Saw blade tilting range: 0–45° - Maximum cutting height (at 90 degrees): 130 mm Ljdpoyzw Hqefx Adtjhf

Condition: used, Year of construction: 2002, functionality: fully functional, Detailed description to follow Lhodoy D N Rgjpfx Adtof

Condition: ready for operation (used), Year of construction: 2017, functionality: fully functional, power: 18.5 kW (25.15 HP), cutting width (max.): 900 mm, This machine comes with a Woodmizer hydraulic log deck It has a 7m cutting length 18.5kWh saw engine Lhedpfx Adeyub Iqetof

Condition: used, Year of construction: 2023, DOUBLE GLASS BEAD SAW TRF 527 VIS CE 1 pc DOUBLE GLASS BEAD SAW TRF 527 VIS CE TRF 527 VIS: Double miter saw for the simultaneous cutting of two glass beads positioned one above the other. The right saw unit is fixed, adjustment of the left unit is via the set cutting length can be read off a digital display. The units have supports that allow two glass beads to be cut simultaneously. The upper support can be removed for cutting larger cross-sections. After the cutting process is completed, the pneumatic clamping cylinders automatically swing to the side to simplify loading and unloading of the machine. STANDARD EQUIPMENT • Fixed unit on the right • Digital dimension display • Pressure switch • 2 HM-tipped saw blades • Electrical system with motor brake, undervoltage release, motor protection switch • Pressure switch • Tool set • Guards with horizontal clamping devices, pivoting • Two-hand control • Belt drive • Pneumatic unit lift • Middle support TECHNICAL DATA • Motor power 2 x 1.2 kW • Saw blade diameter Ø 220 mm • Max. cutting height without support 80 mm • Max. cutting width at 90 degrees 55 mm • Max. cutting width at 45 degrees 40 mm • Max. cutting length 2800 mm (optional 4000 mm) • Min. cutting length 158 mm • Weight 217 kg • Space requirement (standard equipment) 3000 x 850 mm Extended cutting capacity 1 pc Maximum cutting length • 4000 mm Star stop 4 positions 1 pc set 2 mechanical stops for adjusting up to 4 intermediate angles. Additional center support. 1 adjustment for rebated profiles. 1 adjustment for rebated profiles as per drawing: - Attachment to the clamping devices to compensate for the profile inclination - Allowances on the rear stops of the units and the center support. The sketch below shows (in green) a beveled presser that follows the inclined profile and presses it against the allowance on the stop (shown in red). Storage location: Garbsen Ledpfx Adjxnlgcjtjhf

Condition: good (used), Year of construction: 1994, functionality: fully functional, machine/vehicle number: 117004, total length: 7,500 mm, total width: 1,200 mm, total height: 2,000 mm, overall weight: 2,500 kg, KALTENBACH SKL 400 H Cold Circular Sawing Machine (completely overhauled) - Operating voltage: 400 V - Frequency: 50 Hz - Rated current: 20 A - Saw blade: 400 x 4 x 50 mm - Saw blade mount: 50/4 x 14/80 mm - Working range, round material 90/45°: 130 mm - Square material 90°: 120 mm - Profiles 90°: 300 x 45 mm - Profiles horizontal 45°: 220 x 60 mm - Profiles vertical 45°: 80 x 120 mm - Saw motor: 3.7 / 4.5 kW - Cutting speed: 1750 / 3500 m/min - Saw blade feed: 0 - 3700 mm/min - Saw blade rapid return: 4500 mm/min Additional equipment: - Workpiece clamping with short stroke vise: stroke 8 mm - With hand crank for presetting - Machine overhauled and newly painted - Horizontal clamping cylinder front, each Ledpfx Asy Dcu Eodtohf - Minimum quantity lubrication instead of coolant spray system - T3 feeder roller conveyor with rollers 60 x 289 mm - One starter section: 2000 mm, with 5 rollers, one support leg, one mounting angle - One extension section: 2000 mm, with 4 rollers, one support leg, one stop roller, adjustable as a guide for material bars - Length measuring device including T3 discharge roller conveyor Note: The item must be collected by binding appointment between 07 and 09 July 2026 (exact date to be agreed). FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 313026, saw blade diameter: 450 mm, total length: 10,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 2,000 kg, KALTENBACH SKL 450 H Semi-automatic Cold Circular Saw - Operating voltage: 3 x 400 V - Frequency: 50 Hz - incl. roller conveyors Attention: The item must be collected on a binding date between 07 and 09 July 2026, to be agreed upon. Ljdpjy Dcr Dsfx Adtohf FCA D-71263 Weil der Stadt – loaded onto truck

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 119349, saw blade diameter: 450 mm, total length: 12,000 mm, total height: 2,000 mm, total width: 1,200 mm, overall weight: 1,500 kg, KALTENBACH SKL 450 H Cold Circular Saw (completely overhauled) - Saw blade diameter: 400/450 mm Ljdjy Dcrwspfx Adtehf - Saw blade mounting: 50/4 x 14/80 - Working range, round material 90°: 135/160 mm - Square 90°: 125/145 mm - Profiles 90°: 300 x 40 mm / 320 x 50 mm - Profiles horizontal 45°: 220 x 60 mm / 250 x 40 mm - Profiles vertical 45°: 60 x 130 mm / 100 x 150 mm - Saw motor: 3.7 / 4.7 kW - Cutting speed: 1950 / 3900 m/min - Infeed roller conveyor T3, outfeed roller conveyor T3 with length measuring system L45E, one starter section: 2000 mm, horizontal clamping system SKL 450 Note: The machine has been completely overhauled! Note: The item must be definitively collected between 07 and 09 July 2026, on a date to be agreed. FCA D-71263 Weil der Stadt - loaded onto truck

Condition: good (used), Year of construction: 1995, functionality: fully functional, machine/vehicle number: MV-117894/D, saw blade diameter: 400 mm, total length: 8,000 mm, total height: 1,900 mm, total width: 1,000 mm, overall weight: 1,000 kg, KALTENBACH SKL 400 EC-H cold circular saw automatic (completely overhauled) - Max. cutting width: 4 mm - Saw blade arbor bore: 50 mm - Number of mounting bolts: 4 pcs - Bolt circle diameter: 80 mm - Saw blade feed rate: 0 - 3000 mm/min - Rapid return: 4500 mm/min - Adjustable travel of workpiece stop: 70 mm behind and 40 mm in front of the biometric zero point = 110 mm - Stepless manual rotary table adjustment: 90° This is a completely overhauled machine. Specification: Dosing system MS-2 C, infeed roller conveyor T3: 4 m, infeed roller conveyor T3, outfeed roller conveyor T3 with L45D length measuring device Lsdoy Dcqyjpfx Adtshf Note: This item must be collected on a binding date between July 7th and July 9th, 2026 (exact date to be coordinated). FCA D-71263 Weil der Stadt - loaded onto truck

Condition: like new (used), Year of construction: 2022, functionality: fully functional, feed length X-axis: 9,040 mm, feed length Z-axis: 200 mm, feed rate X-axis: 60 m/min, saw blade diameter: 700 mm, saw blade width: 5 mm, spindle speed (max.): 5,000 rpm, We are offering an HM-Z3 CNC crosscut saw and milling combination (year of manufacture: 2022). The machine is in excellent condition, has hardly been used, and can be considered virtually as new. Due to a change in our workflow, this machine has become redundant and is now available for sale. If you have any questions or require further information, feel free to send us a message or give us a call. Ljdpfx Adsyzpm Njtehf

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, OPPORTUNITY – IMMEDIATELY AVAILABLE HYDRAULIC HIGH PERFORMANCE BAND SAWING LINE MANUFACTURER: BEHRINGER MODEL: HBM 440 A PC-E YEAR OF MANUFACTURE: 2015 Sawing capacity round: 440 mm Sawing capacity flat (W x H): 440 x 440 mm Minimum round / flat: 30 mm / 20 x 20 mm Saw blade dimension: 6700 x 54 x 1.1 mm Drive power: 11 kW Cutting speed: 20 – 200 m/min Material feed per stroke: 600 mm Material feed, multiple: max. 5400 mm Machine weight: 8,200 kg Dimensions (L x W x H): 6500 x 5000 x 2700 mm Transport height: 2400 mm Specifications subject to change – errors excepted Equipment: - Coolant system 200 l Ledpfx Adjxwqm Hotehf - Full enclosure of the saw - Material infeed support, 1650 mm length - Chip conveyor - BEHRINGER CNC dialogue computer IP 65, BEHRINGER dialogue control IP 65 - Automatic bar change - Sorting unit in portal design: - Usable stroke of gripper: 4660 mm - Depth of storage: 2000 mm - Max. cut-off length: 4000 mm - Max. single workpiece weight: 1500 kg - Infeed magazine KM 45 F-VR / 600-6,200: - Round material: 50 – 440 mm - Flat material: 40 x 20 – 400 x 400 mm or 440 x 430 mm - Bar length: 600 – 6200 mm - Powered roller conveyor: 6100 mm - Usable material storage: 3000 mm - Safety fence PRIOR SALE AND AVAILABILITY RESERVED

Condition: used, Year of construction: 2015, machine/vehicle number: 23811.15, functionality: fully functional, The machine is used but operational. It has been in our metalworking shop since 2015 and is being sold due to the closure of the company. We are selling the saw with two stops. Lhedpoy Eg Ifjfx Adtof

Condition: excellent (used), Sprossen Punching Machine 12 mm used, in excellent condition Brand: Jeyden Sprossen blade 12 mm Right-hand support table with adjustable stop Lodoyza Anopfx Adtjhf Space requirement approx. 1100 mm x 600 mm x 1100 mm Weight approx. 65 kg Storage location: 54634 Bitburg, loaded free onto transport, unpacked Sold as seen in current condition, without warranty or guarantee

Condition: new, – Semi-automatic – Hydraulic – 2 speeds – Double mitre – Saw feed pressure hydraulically adjustable Lodpfoh Razfjx Adtehf – Cooling – Saw blade 2730 x 27 x 0.9 mm – Foot control – Emergency stop – Documentation – 400 V

Condition: used, Year of construction: 1992, operating hours: 10,150 h, This Eder mobile crane M 825 B, used in a sawmill, was manufactured in 1992 and has approximately 10,150 operating hours. The crane is fitted with a Hultdins SuperSaw log grapple with integrated saw, allowing for the handling and cross-cutting of logs. Saw bar: 75 cm. Grapple opening: 58 cm. Rotor capacity: 16,000 kg. Bids from €10,000 excluding VAT. Lhodpfx Asyzpg Aodtjf If you have any questions or would like more information, please feel free to send us a message or call us.

Condition: used, Technical details: cutting diameter: 260 mm saw band length: 4310 mm saw band width: 27 mm cutting range 90 degrees: round: 260 mm cutting range 90 degrees: square: 260 x 260 mm band speed: 17 - 110 m/min electrical connection: 400/50 V / Hz. total power requirement: 3,5 kW machine weight approx.: 1000 kg dimension machine xH: 2,3 x 1,0 x 1,4 m dimensions L x W x H: 3,0 x 0,4 x 0,8 m Ledpfx Aey Dc N Asdtohf

Condition: excellent (used), Year of construction: 2006, functionality: fully functional, power: 5.5 kW (7.48 HP), overall weight: 1,000 kg, Equipment: CE marking, saw blade guard, scorer, For sale is a robust and proven Altendorf WA 80 panel saw, ideal for joineries, carpentries, and industrial use. Equipment & Highlights: + Scoring unit (for chip-free cuts on coated panels) + Sliding table: approx. 3200 mm + Duplex fence (usable on both sides, high precision) + Double roller carriage with STEG – secondary support for optimal workpiece guidance + Main motor: 5.5 kW + Heavy-duty cast iron table for vibration-free operation Technical Details: + Saw blade diameter: up to approx. 400 mm (without scoring unit) + Saw blade tilting 0-45°, electrically adjustable + Saw blade height adjustment, electric + Max. cutting width at rip fence right: 130 cm + 3 speeds: 3000 / 4000 / 5000 rpm + Scorer independently adjustable in height and lateral position + Weight: approx. 1000 kg Condition: Used, but in good, fully functional condition. Machine is ready for immediate use. Special Features: The combination of the long sliding table, duplex fence, and double roller carriage with additional support makes this machine ideal for precise and comfortable processing of large panels. Ledpfxsy Eyblj Adtohf Price: €7,500 net without Duplex / €8,500 net incl. Duplex Location: 39340 Haldensleben Inspection: possible anytime by appointment Please feel free to contact us if you have any questions.

Condition: excellent (used), Year of construction: 1989, Elektra Beckum Bandsaw BAS 450 DB Year of manufacture: 1989 Lodpfx Ajyy U Txsdtehf Cutting height: 300 mm Blade length: 3,380 mm Motor power: 1.5 kW Weight: approx. 120 kg Location: ex stock 54634 Bitburg - immediately available - Subject to prior sale