Used Bridge Type Machining for sale (85,113)

Condition: used, Year of construction: 1990, x-travel 2800 mm y-travel 1000 mm z-travel 1200 mm table surface area 2000 x 800 mm rotary table dia. 800 mm spindle taper SK 50 spindle turning speed - stepless 50 - 2000 U/min max. torque on the spindle 3000 Nm spindle drive 30 kW feeds longditudinal/cross/vertical 2 - 2000 mm/min rapid motion -longitudinal/cross/vertical 7 m/min control SIEMENS control SINUMERIK 850 M Bljdstqqmgopfx Abpec no. of tools in magazin 56 workpiece diameter at full load 114 mm wotkpiece diameter with 2 vacant positions 200 mm workpiece length 400 mm weight of tools max. 16 kg tool changing time ca. 8 - 9 sec internal coolant system feed ja / yes total power requirement kW weight of the machine ca. 25,4 t dimensions of the machine ca. 6,6 x 3,15 x 2,98 m = 5-axis CNC-bed-type milling machine with integrated NC-rotary table and NC-swivelling milling head - Acc.: tool pre-setting device, various tool fixtures, chip conveyor, coolant with high pressure pump and filtration device, electron. handwheel, fixators

Condition: good (used), travel distance X-axis: 4,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 2,000 mm, table load: 20,000 kg, Spindle diam. 130 mm Bodpfxevxvcas Abpjlc Spindle nose attachment iso 50 X-axis stroke: 4000 mm Y-axis stroke: 3000 mm (vertical) Z-axis stroke: 2000 mm W-axis stroke: 800 mm Spindle motor power 37 kw Spindle speed 0 - 3000 rpm Table 1800 x 2500 mm Table capacity 20 tons CNC HEIDENHAIN TNC I 530 ATC 60 places Chip conveyor Electronic handwheel Coolant through spindle Spindle sleeve

Condition: used, Year of construction: 1978, spindle diameter 105 mm x-travel 1250 mm y-travel 1000 mm z-travel 600 mm table length 1100 mm table width 900 mm tool adaptor 50 ISO / MK total power requirement kW weight of the machine ca. t Blodpfet Hwtxsx Abpjc CNC Table Borer, Reconditioned 2002, BOSCH CC 300

Condition: excellent (used), functionality: fully functional, travel distance X-axis: 4,000 mm, travel distance Y-axis: 2,100 mm, travel distance Z-axis: 1,300 mm, rapid traverse X-axis: 30 m/min, rapid traverse Y-axis: 30 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 30 m/min, feed rate Y-axis: 30 m/min, feed rate Z-axis: 30 m/min, spindle speed (max.): 6,000 rpm, spindle speed (min.): 36 rpm, table length: 4,000 mm, table width: 1,500 mm, tank capacity: 500 l, SHW PowerSpeed 5 Travel Ranges • X-axis (bed): 4,000 mm • Y-axis (vertical): 2,100 mm • Z-axis (spindle horizontal): 1,300 mm Control System • CNC control: Heidenhain iTNC 530 Feed Speed Blodpfx Aew I Rz Hsbpec • X, Y, and Z axes: 2 - 30,000 mm/min • Acceleration: 3.5 m/s² Universal Milling Head in Orthogonal Design • Milling head swivel range (mounting): 360 x 1 degree • Milling head swivel range: 180 x 1 degree • Tool holder: SK 50 DIN 69871 • Speed range: 36 – 4,000 rpm o Short-term: 36 – 6,000 rpm Automatic Tool Changer • Tool magazine for 48 tools Clamping Plate • Clamping surface: 4,000 x 1,500 mm Chip Conveyor • Fork length: 4,000 mm Coolant System • Tank capacity: 500 l Splash and Chip Protection • One-sided, with 2 manually sliding doors About the Company MBM MBM Maschinenservice & Gebrauchtmaschinen GmbH is an independent specialist for SHW machine tools. Our main focus is on tool milling machines. Our services include, among others, spare parts delivery, on-site customer service, machine overhauls, and control system modernization. Services: - Used machines - Spare parts - Customer service - Machine servicing - Machine overhauls - CNC control modernization ----- _____ Used machine – used milling machine – used traveling column milling machine – orthogonal milling head – metalworking – tool milling machine – milling head – SHW machine – SHW spare parts – used milling machine – used cnc milling machine – used boring and milling machine – used metal milling machine – used metal mill – used metal machining center – used cnc mill – cnc milling machines – milling machinery – large part machining – cnc large part machining – milling – shw – PS5 – PS 5 – Powerspeed – SHW PSZ 5 – SHW Powerspeed – SHW Powerspeed 5 – PSZ 5 – Heidenhain – MBM milling machine – MBM machine – column-type milling machine

Condition: good (used), functionality: fully functional, travel distance X-axis: 12,000 mm, travel distance Y-axis: 1,800 mm, travel distance Z-axis: 1,000 mm, MECOF CS 50 CNC Universal Milling SELCA S3045L, Built 1997, Two axis Head C-Axes 360° x A-Axes 3° Bed 13,300 x 1,090 mm. X, Column travel 12,000 mm Y, Headstock vertical travel 1,800 mm Z, Frame 390 x 390 mm, stroke 1,000 mm Bed 13,300 x 1,090 mm Bjdpfxowdm U Ne Abpslc Two axis Head C-Axes 360° x A-Axes 3° Spindle taper ISO 50 Spindle speed 10 - 4,500 rpm Spindle motor 20 kW Automatic tool changer 41 Tools

Condition: used, MUNK Günzburger Steigtechnik 303406 Aluminum access ladder machine crossing with platform (bridge) 1900-750-2500 RA2414 Technical data: Manufacturer: Munk Günzburger Steigtechnik Type: machine crossing with pedestal Condition: very good (used) Total size: 1900-750-2500 mm (WxDxH incl. handrail) step dimensions: 85 x 600 x 45 mm step/tread height: 230 mm platform dimensions: 800 x 650 mm Platform height: 1350 mm bottom edge 1420 top edge Steps: 6 (5 steps + platform on each side) Maximum working height: 3450 mm maximum load: 150 kg Weight: 38 kg Blodpfjwpymiex Abpsc Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg For individual, professional advice, simply contact us. Simply contact us by phone or e-mail. We will be happy to help you with the planning and implementation of your projects. We look forward to hearing from you. With kind regards Your team at Dr. Sonntag GmbH & Co. KG Your specialist and contact for intralogistics

Condition: used, Year of construction: 1980, x-travel:1600 mm y-travel:800 mm z-travel:630 mm spindle taper:SK 50 feed speeds:10-6000 mm/min rapid traverse:6 m/min turning speed range - stepless:20-2000 U/min max. table load:5000 kg dimensions of switch cabinet:1800 x 530 x 2000 mm total power requirement:18 kW Bedjcxxrnepfx Abpelc weight of the machine ca.:11 t dimensions of the machine ca.:4,6 x 2,9 x 2,62 m with PHILIPS NC 6664 3-axis control with program memory, hydraulic tool clamping, coolant system, chip-conveyor, horizontal and vertical spindles (SK 50), separate electrical cabinet, NC-round table, emergency cut-off

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series machine - 1250 mm x 1250 mm x 220 mm High precision - milling and drilling with extremely high speed and quality. As CNC Milling machines manufacturer whistler-technology with SkyCNC CNC milling and engraving your partner. Our PFEIFER technology SkyCNC WK series milling machines with high-precision ball screw drive on all axes provide highest precision, accuracy and speed - with a pleasant value for money.   By building a high solid steel base frame ca. 2,2 t high static rigidity of the machine is achieved, so that the processing of solid woods and various metals will be trouble. The sophisticated location and distribution of 35mm linear rails and guides and the associated massive portal with its vibration damping characteristics distinguish our CNC milling machines made especially. The superior programmable CNC control allows flexible intervention via touchscreen in all production conditions and is standard in our PFEIFER technology SkyCNC WK series milling machines. This CNC control, you can create your milling data or CAD / CAM import data and then can be processed independently of a computer.   The tool changer (up to 16 tools), the vacuum table made of solid aluminum, various tool / workpiece cooling solutions, the automatic lubricating device for all axes and other refined details, complete this milling system. Bleds Sd U Depfx Abpoc   With the PFEIFER technology SkyCNC WK series you get a reliable and efficient bulk - Portal - milling system for your applications.   - Drive system: high-precision ballscrew on X and Y axis and Z axis of high-precision manufacturing - Operating speed: 15 m / min - Xyz Workspace / traverse: 1250 x 1250 x 220 mm - Table size (vacuum table with milled vacuum tracks): 1220 x 1220 x 30 mm - Xyz Repeatability: 0.03mm - Xyz accuracy: 0.01 mm - Compatible with DIN ISO CAM etc. - Format: ISO standard G-code, FANUC compatible - Additional: Spindle motor / tool changer / Vacuum table according to customer requirements - Warranty: 2 years - Spindle Power: from 5.5kW (other spindle power optional) - Spindle speed: 6000-24000 U / min (depending on requirements) - Spindle taper: BT 30 4ea ER20 (other recordings optional) - Drive: AC SERVO motors on all axes - Tool changer: 6 magazine slots - Power supply: AC400 V ± 10% 50Hz - Power 10-15 kW (depending on equipment) - Dimensions: 2670 (L) X 1735 (W) x 1790 (H) mm - Weight: 2700 kg

Condition: new, Year of construction: 2025, machine/vehicle number: 2021, 3D AC SERVO SkyCNC WK Series Milling Machine - 2050mm x 3050mm x 220mm High precision - milling and drilling with extremely high speed and quality. As a CNC milling machine manufacturer, pfeifer-technology is your partner with skycnc CNC milling machines and engraving machines. Our PFEIFER technology skycnc WK series milling machines with high-precision ball-spindle drive on all axes offer you the highest precision, accuracy and speed - and all this with a pleasant price-performance ratio. Due to the structure with a high solid steel base frame approx. 4 t, a high static rigidity of the machine is achieved, so that the processing of solid wood and different metals is possible without any problems. The sophisticated position and distribution of the 35mm linear rails and guides and the associated massive portal with its vibration-damping properties characterize our CNC milling machines in particular. All machine components and the servo drive units used are the result of years of development and experience. The powerful servo motors are highly effective and backlash-free with the ball screw from German quality production and thus offer a feedback-free drive to meet even the highest demands. The superior, freely programmable CNC control enables flexible intervention by means of a touchscreen under all production conditions and is standard on our PFEIFER technology skycnc WK series milling machines. With this CNC control you can create your milling data or import CAD/CAM data and then process them independently of a computer. The tool changer (up to 16 tools), the all-aluminum vacuum table, various tool/workpiece cooling solutions, the automatic lubrication system for all axes and other ingenious details round off this milling system. With the PFEIFER technology skycnc WK series you get a reliable and powerful large portal milling system for your applications. On request, we can supply the corresponding CAD / CAM ARTCAM SKYCNC control software: 2.5 / 3D PFEIFER SKYCNC milling & engraving software in German for Windows® operating systems or ArtCAM Pro / ArtCAM Insignia software in German / Russian etc. on request. - Drive system: high-precision ball screw on X and Y axis and Z axis from high-precision German production - Working speed: 15 m/min - xyz working area/travel area: 2050 x 3050 x 220 mm - Table size (vacuum table with milled vacuum tracks): 2000 x 3000 x 30 mm - xyz repeat accuracy: 0.02mm - XYZ Accuracy: 0.01mm - Compatible with Software Type3, ARTCAM, MASTERCAM, FeatureCam, etc. - Formats: ISO standard G-code, FANUC compatible - Addition: Spindle motor / Tool changer / Vacuum table according to customer requirements - Warranty: 1 year - Spindle power: from 5.5kW (other spindle powers optional) - Spindle speed: 6000 - 24000 rpm (depending on requirements) - Spindle mount: BT30 / ER20 (other mounts optional) - Drive: AC SERVO motors on all axes - Tool changer: 4-8 magazine places Bjdpfx Asbnpgxobpjlc - PDSP control RTU / MTU (Remote Terminal Unit) - Power input: AC400V±10% 50Hz - Power consumption 10-15 kW (depending on equipment) - Dimensions: 4500 (L) X 3100 (W) x 2500 (H) mm - Weight: 4000kg

Condition: used, Year of construction: 1996, functionality: fully functional, machine/vehicle number: 70996, total width: 2,375 mm, total length: 2,375 mm, total height: 2,000 mm, overall weight: 4,500 kg, Bridge punching machine - Punching force 700 kN - Table dimensions 1600 x 650 mm - Stroke trigger - button or light curtain, 1- and 2-stroke - New motor coupling, pump inspected, unit sealed Bridge guide - Slide pads replaced, photo documentation of the work - Frequency-controlled bridge travel motor - Slight signs of wear, paint partially touched up - Machine thoroughly repaired and inspected according to manufacturer's standards - Photo documentation of the work available - CE certification according to the German Industrial Safety Ordinance - Complete documentation Bljdewduymopfx Abpsc

Condition: excellent (used), Year of construction: 1994, operating hours: 1,930 h, functionality: fully functional, travel distance X-axis: 7,200 mm, travel distance Y-axis: 4,200 mm, travel distance Z-axis: 1,750 mm, feed rate X-axis: 15,000 m/min, feed rate Y-axis: 15,000 m/min, feed rate Z-axis: 15,000 m/min, total length: 15,000 mm, table length: 5,000 mm, total width: 15,000 mm, spindle speed (min.): 10 rpm, spindle speed (max.): 4,000 rpm, total height: 7,500 mm, table height: 1,350 mm, distance between stands: 3,500 mm, type of input current: AC, table load: 65,000 kg, workpiece weight (max.): 65,000 kg, distance table center to spindle nose: 2,300 mm, overall weight: 210,000 kg, spindle motor power: 50,000 W, MACHINE DATA Machine type: Portal milling machine - double column for continuous 5 axis operation Manufacturer: WALDRICH COBURG Model: 15 S - 10 FPF 300 NC Year of construction: 1994 Condition: Fully refurbished 2015 Functionality: fully functional Operating hours: 1,931 h TECHNICAL DETAILS Number of controlled axes: 5 travel distance X-axis: 7,200 mm travel distance Y-axis: 4,200 mm travel distance Z-axis: 1,750 mm spindle speed (max.): 4,000 rpm working width: 3,500 mm PROVISION Machine location: Ljubljana, Slovenia Availability: now Delivery conditions: FCA Pick up at location: Ljubljana Shipping costs: upon request Planer-milling machine - double column: completely overhauled in 2014 / 2015 by Waldrich Coburg (basically everything except the casting): > New control unit > New cables > New motors > New electrics > Guideways overhauled DESCRIPTION - Heavy double-column machine for processing complex shapes - 2 pallet stations with 2 pallets (load capacity 65t each) - Machine with CNC control SIEMENS 840D sl - In 2014, conversion of the control system to SIEMENS 840D sl (incl. complete cabling and control cabinet) - in 2015 replacement of all axis motors Bsdovv N I Repfx Abpelc - Various angle milling heads - NC-controlled milling head with 50 kW milling power / clamping 2.5° each with Hirth serration (type USP300C450F15S) - 2-axis NC-controlled fork head with 40 kW milling power (type UFN00SZ500) - Automatic tool changer for 76 tools (ISO 50 and 60) TECHNICAL DETAILS Travel X / Y / Z: 7,200 / 4,200 / 1,750 mm Milling width: 3,500 mm Distance spindle nose to table: 2,300 mm Milling power: 50 kW Speed: 10 - 4,000 rpm Front spindle diameter: 150 mm Spindle holder: ISO 60, ISO50 Control: Siemens 840D sl Pallet size: 3,000 x 5,000 mm Pallet load: max. 65 t Number of pallets: 2 pieces Tool changer: 76 slots Feed rate: 10 - 15,000 mm/min MACHINE DETAILS Pick-up power: 92 kW Weight: 210 t Spindle hours: 1,931 h Switch-on time: 7,870 h Bed dimensions: 12.5 x 2.3 x 0.78 m; 28.5 t Pallet dimensions: 5.35 x 3.0 x 0.4 m; 22 t Main pallet carrier dimensions: 5.1 x 2.9 x 0.5 m; 25 t Dimensions of bed section: 3.8 x 2.9 x 0.5 m; 10 t Milling spindle box dimensions: 4.1 x 1.9 x 1.5 m; 13.5 t Left/right column dimensions: 4.1 x 1.3 x 1.7 m; 10.5 t Exhaust air slide dimensions: 8.5 x 0.7 x 1.2 m; 1.1 t Control cabinet dimensions: 7.9 x 0.6 x 2.1 m; 2.8t THIS IS A TOP CLASS MACHINE FOR MOST ACCURATE WORK; HIGHLY EFFECTIVE. MACHINE IS ASSEMBLED AND UNDER POWER:

Condition: like new (used), CNC: FAGOR 8055 (retrofit option with Heidenhain Tnc640) Spindle diameter: 110 mm Tool holder taper: ISO 50-7388/1 - DIN 69871 Milling arbor mounting diameter: 221.44 mm Tool clamping force: 1,600 daN Travel Spindle horizontal stroke (Z-axis): 550 mm Spindle vertical stroke (Y-axis): 1,500 mm Table traverse stroke (X-axis): 3,000 mm Column longitudinal stroke (W-axis): 1,300 mm Table Size: 1,500 x 1,220 mm Maximum load capacity: 4,000 kg Max contouring torque: 250 daN T-slots: No. 7, 22 mm, H7 Rapid table rotation: 3 rpm Table clamping torque: 674 daN Speeds and feeds Spindle motor power: 22 kW Speed ranges: 2 Max torque low range: 105 daN Max torque high range: 31 daN Spindle speed range: 15 - 3,000 rpm Constant torque, low range: 15 – 203 rpm Constant torque, high range: 50 – 680 rpm Bjdpexukfqefx Abpslc Constant power, low range: 203 – 895 rpm Constant power, high range: 680 – 3,000 rpm Working feedrates: 2 – 10,000 mm/min Rapid feedrates: 10,000 mm/min Maximum axis thrust: 1,600 daN Tool magazine Number of tools: 60 Chain pitch: 140 mm Max tool diameter: 138 mm Max tool diameter (adjacent pockets empty): 400 mm Max tool length (excluding taper): 400 mm Max allowable tool weight: 30 kg Tool holder taper: ISO 50-7388/1 - DIN 69871 Overall weight: 24,500 kg Machine dimensions (L x W x H): 5,350 x 4,770 x 3,700 mm Machine equipped with: • Brushless motors • Through-spindle coolant • Quill stiffener • Heidenhain linear scales • Operation and maintenance manuals

Condition: good (used), Year of construction: 1996, functionality: fully functional, KRÜSI Chalet Building Machine / Log House Production Line Type CM 40 POS 1: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kw motor, length 6000mm Bledohw N Npspfx Abpsc POS 2: Longitudinal cutting saw diameter saw blade 400mm Pneumatic feed of the saw depth Main motor 4,0 kW POS 5: KKRÜSI RÜSI chalet building machine / log house finishing machine type CM 40 Machine-No.431 Year of manufacture 1996 Sawing unit: Manual feed spindle adjustment with analog dimension display CM milling unit: Hydropneumatic feed Spindle adjustment with digital dimension display Drilling unit: Manual feed Spindle adjustment with analog dimension display Face milling unit Hydropneumatic feed Spindle adjustment with digital dimension display POS 6: Motor driven roller conveyor working width 400mm, stepless feed speed 2,0 kW feed motor length 12000mm 9 pcs. stop flaps, adjustable, pneumatically controllable 10 pieces sideshift for material transfer POS 7: assembly table 4.400mm x 12.000mm Manufacturer: Sweden Year of manufacture approx. 1985 Assembly table for further processing of the manufactured log house planks. 4 chain hoists for cross transport gear motor with 4,0 kW

Condition: reconditioned (used), functionality: fully functional, travel distance X-axis: 1,320 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 1,800 rpm, controller model: Fagor 8055, TECHNICAL DETAILS Table size: 1,700 x 510 mm Max. table load: 3,000 kg Travel paths Bledpfjwfghrsx Abpec X-axis travel: 1,320 mm Y-axis travel: 610 mm Z-axis travel: 610 mm Spindle Spindle speed range: max. 1,800 rpm Tool holder: ISO-50 Control system CNC control: Fagor 8055 Electronic handwheel: Fagor MACHINE DETAILS Machine weight: 8,500 kg

Condition: used, Year of construction: 2001, functionality: fully functional, travel distance X-axis: 6,000 mm, travel distance Y-axis: 1,200 mm, travel distance Z-axis: 2,000 mm, rapid traverse X-axis: 12,000 m/min, rapid traverse Y-axis: 12,000 m/min, rapid traverse Z-axis: 12,000 m/min, spindle speed (max.): 4,000 rpm, input voltage: 380 V, input frequency: 50 Hz, Bed type millimg machine FIL type FBM 600,axis traverse ; X 6000 mmY1200mmZ2000mm. Rapid traverse 12000 mm/min. Automatic head index 2*, rpm4000 two range, spindle uso 50. Tool magazine 40 positions Bjdjwb Exzspfx Abpolc Cnc Selca type S3045

Condition: used, Year of construction: 2020, operating hours: 1,000 h, functionality: fully functional, Kovo Staněk TZNZ 5-11/16-36 (2020) – High-Performance Hanger Shot Blaster Type: overhead rail / hook (CE) • Year: 2020 • Total weight: 12,000 kg • Condition: excellent, production-ready. Capacity & Power Blodpfjxpiw Ujx Abpec Max workpiece: Ø 1600 × 3600 mm (H) Max hook load: 1000 kg Throwing wheels: 5 × 11 kW, rotor Ø 350 mm (individually fed) Abrasive hopper: approx. 1800 kg Air demand: 20 m³/h at 6 bar Noise level: ≤ 85 dB(A) Machine size (W × D × H): 4730 × 5070 × 6520 mm Mains: 400/690 V, 50 Hz • Control voltage: 24 V DC Control & Automation PLC (NX platform) with touchscreen HMI and remote service access. Up to 99 programs with per-job settings: blast time, turbine speed, hook rotation and speed, swing angle of turbine block, servo abrasive flow per wheel, automatic conveyor start/stop. Diagnostics and full interlocking on doors and motions. Wear Protection & Build Blasting chamber lined with XAR500 wear plates (5 mm) and manganese steel X120Mn12 in formed/high-wear zones; replaceable rubber in impact areas. Wheel internals (blades, cages, liners) made from tool steel 1.2379 / X153CrMoV12 (~62 HRC). Heavy welded turbine block housing. Service platform with safety gate and Total Stop. Abrasive Circuit Designed for steel shot S330 (initial charge about 1.5 t). Elevator → air separator → shared hopper loop; magnetic/air cleaning maintains media quality. Servo dosing to each wheel ensures uniform intensity and reduced consumption. Extraction & Filtration CIPRES CARM dust collector, 7.5 kW fan, automatic back-draft flap; ducting includes automatic valve for cabin purge at cycle end. Handling System Powered monorail with adjustable speeds; servo-driven hook rotation and lift; pneumatic diverter switch; two 1.1 kW hoists. Timed sequence allows loading the next batch while blasting. Applications Forgings, castings, welded structures and general steel fabrications—surface preparation before painting, galvanizing or coating with high throughput and repeatable Sa 2½–3 results. Key Advantages 5 wheels for high coverage and speed • PLC plus servo precision • XAR and manganese lining for long service life • 12-ton EU build • Low noise ≤ 85 dB(A). Available for inspection on request via the platform.

Condition: used, Year of construction: 1995, travel distance X-axis: 10,000 mm, travel distance Y-axis: 2,600 mm, travel distance Z-axis: 600 mm, spindle speed (max.): 1,950 rpm, feed length W-axis: 700 mm, quill diameter: 140 mm, cnc SELCA 3045 X AXIS STROKE 10000 MM Y AXIS STROKE 2600 MM Z AXIS RAM STROKE 600 MM W AXIS QUILL STROKE 700 MM SPINDLE DIAMETER 140 SPINDLE CONNECTION ISO 50 SPINDLE MOTOR POWER 53 KW ROTATION SPEED 6 - 1950 MM ROTARY TABLE TABLE 2000 X 1600 MM CAPACITY 10 TON STROKE AXIS V 2100 MM AUTOMATIC BI-ROTATIVE HEAD UNIVERSAL TUAR 25 PICK UP HEADS INTERNAL AND EXTERNAL COOLANT 60-Place TOOL CHANGE CHIP CONVEYOR ANCHORING PLANE 2500 X 6000 MM HYDROSTATIC X-AXIS Bodpfxownqnue Abpslc RAM WITH HYDROSTATIC GUIDE ON 4 SIDES

Condition: used, Year of construction: 1996, travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,000 mm, rotational speed (max.): 3,000 rpm, rotational speed (min.): 50 rpm, X-AXIS TRAVEL: 2500 MM Y-AXIS TRAVEL: 1000 MM Z-AXIS TRAVEL: 1000 MM FIXED TABLE: 1600 X 800 MM - MAXIMUM LOAD: 5000 KG ROTARY TABLE: 750 X 750 MM - MAXIMUM LOAD: 5000 KG Blodpfxjwz H Hms Abpjc RAPID FEED AXES: X, Y, Z: 10,000 MM/MIN SPINDLE TAPER: ISO 50 SPINDLE SPEED: 50 - 3000 RPM SPINDLE MOTOR POWER: 16.5 KW NO. 2 SPEED RANGE CNC HEIDENHAIN TNC 407 AUTOMATIC HEAD HORIZONTAL - VERTICAL AUTOMATIC TOOL CHANGER

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, CNC controller: HEIDENHAIN iTNC530 Axes X-axis travel mm: 3.000 Y-axis travel mm: 1.700 Z-axis travel mm: 1.500 Feed rates m/min: 10 Rapid traverse m/min: X, Y: 20; Z: 10 Worktable Table dimensions mm: 3.200x1.200 Maximum weight on table kg: 8.000 T-Slots: 7xT22 - 150 mm Spindle Spindle speed rpm: 30 - 5.000 Spindle drive power kW: 28/38 Gear box steps: 2 Cooling Cooling through the Spindle Center bar: 22 Tool system Tool holder: ISO-50 DIN 69871A Equipment Electronic Handwheel Chip conveyor Bljdpfjrw Arzox Abpoc 4th axis ready

Condition: as good as new (ex-display), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 23 03 28 / 1, TWIN BELT GRINDING MACHINE TYPE ZBS for manual grinding, satin finishing and polishing - equipped with a left hand machine stand with the grinding belt drive unit and a right hand machine stand with the grinding belt clamping unit - free space within the working area by guiding the belts over an upper installed deflection unit - open and close of upper grinding belt hoods by pneumatic cylinder Blsdpfst Hvkvjx Abpec - accident protection by movable grinding belt cover - selectable for front and rear belt - preselection by 2 potentiometers in the control panel and frequency inverter in high-line version - with limit switch/operation by movable grinding belt cover - tension of each grinding belt by pneumatic belt tension device - the grinding belt is driven by a frequency controlled AC-motor with P = 4,0 kw - frequency converter with brake chopper unit for braking in max. 10 s - grinding belt speed v = 4 - 25 m/s - emergency-off release line in the working area - with a sliding table of aluminum-pipe installed between the machine stands - table movement back and forward by means of 4 soft prism rolls - max. workpiece weight 100 kg - motorized table height adjustment by spindles and roller guiding's until max. 780 mm - spindles drive by 2 synchronic gear motors with P = 0,75 kW, speed v = 0,5 - 1,5 m/min - machine without lower traverse to increase the clearance of movement to an effective depth of 1400 mm (lower edge grinding belt - ground) - with a temporary traverse, to remove after adjusting and bolting to the ground - pressure of the grinding belt on the workpiece to be ground by manually operated grinding pressure piece, pendulous pressure piece with locking screw, softy guiding on prism rolls - dust extraction tube on the left hand machine stand with D = 200 mm - necessary extraction power = approx. 3400 m3/h - working area to be illuminated by means of 2 LED lights, adjustable in 3 steps ZBS 3 - table dimension 3000 x 1000 mm, grinding belt 100 x 9000 mm Filter included. Additional info in pdf attached.

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,200 mm, pressing force: 600 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, Eccentric presses are a type of mechanical press driven by force generated via an eccentric mechanism, and are commonly used for cold forming operations such as punching, cutting, and forming. H type (straight-side) eccentric presses provide high stability and process safety in applications requiring large die tables and heavy-duty tooling, thanks to their rigid frame design. The CRONOSSTECH CEHP 600 – H Type Eccentric Press 600 Ton is engineered for stable operation in high-volume production, prioritizing die protection and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it ensures reliable performance under continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/tooling protection provided by hydraulic overload protection system - Precise guidance with 8-point ram and balancer piston - Controlled and user-friendly operation with PLC and touchscreen interface - High operator safety via light curtain protection system Application Areas - Punching/cutting/forming applications requiring large tables - Mass production with automated feed lines - Heavy die and high tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch and brake • Additional T-slotted plate • 8-point guided ram • Adjustable stroke on single connecting rod • Balancer piston on the ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain (photoelectric safety guard) • Enclosed oil reservoir with gear unit • Double-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap discharge systems • Sliding safety cover at table front • Custom-specification dies Bsdpfxsx N R A Ue Abpelc ✅ TECHNICAL SPECIFICATIONS (CEHP 600) Capacity: 600 Ton Table–Ram Distance: 500 mm Housing Width: 2350 mm Ram Adjustment: 120 mm Press Width: 3100 mm Press Depth: 3500 mm Press Height: 5200 mm Table Size: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (fixed): 200 mm Motor Power: 90 kW Weight: 77,000 kg ✅ PRODUCTION / PROCUREMENT NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,200 mm, pressing force: 500 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press that operates with a force generated through an eccentric mechanism and is used in cold forming operations such as punching, cutting, and forming with dies. H type (straight-side) eccentric presses provide high stability and process safety for large bed and heavy die applications, thanks to their rigid frame constructions. The CRONOSSTECH CEHP 500 – H Type Eccentric Press 500 Ton is designed for stable operation, die protection, and operator safety in high-volume production. Featuring a monoblock frame, 8-guide ram system, hydraulic overload safety device, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2200×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precise guidance with 8-guided ram and balancer piston - Controlled, user-friendly operation with PLC & touchscreen interface - High operator safety with light curtain protection Areas of Use - Punching/cutting/forming applications that require a large table - Serial production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted additional sub-plate • 8-guide ram • Adjustable stroke on single connecting rod • Balancer piston on ram • Fully automatic thin oil lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Motorized reverse movement • Hydraulic overload safety device • Motorized ram adjustment system • Light curtain safety guard • Enclosed gear group in oil sump • Dual-coil safety valve • CE conformity ✅ OPTIONAL FEATURES • Press feeding systems • Scrap ejection systems • Sliding safety guard in front of the table • Custom die specifications as required ✅ TECHNICAL SPECIFICATIONS (CEHP 500) Capacity: 500 Tons Table-Ram Distance: 500 mm Housing Width: 2330 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 3350 mm Press Height: 5000 mm Table Size: 2200×1200 mm Ram Face Size: 2200×1200 mm Stroke (Fixed): 200 mm Motor Power: 75 kW Weight: 68,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH. Blsdpfex N R Ahsx Abpec

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,000 mm, pressing force: 400 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, Eccentric presses are a type of mechanical press that operate with force generated via an eccentric mechanism, ideal for cold forming processes such as punching, cutting, and forming. H-type (straight-side) eccentric presses provide high stability and process reliability in applications requiring large tables and heavy dies, thanks to their rigid frame structures. The CRONOSSTECH CEHP 400 – H Type Eccentric Press 400 Ton is engineered for high-output production, featuring a design focused on stable operation, die protection, and operator safety. With its monoblock frame, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance for continuous production demands. Key Advantages: - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection via hydraulic overload safety - Precise guidance with 8-point guided ram and balancer piston - Controlled and user-friendly operation with PLC + touch screen interface - Maximum operator safety with light curtain protection system Typical Applications: - Punching/cutting/forming processes that require a large table - Mass production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel welded body construction • Pneumatic clutch and brake • Additional plate with T-slots • 8-point guided ram • Adjustable stroke with single connecting rod • Balancer piston in the ram • Fully automatic micro-lubrication system • PLC control system • Piano-type control panel • Touch-sensitive LCD screen • Motor reverse function • Hydraulic overload protection • Motorized ram adjustment mechanism • Light curtain safety barrier • Enclosed oil tank with gear set • Double-coil safety valve • CE compliance ✅ OPTIONAL FEATURES • Press feeding systems • Scrap removal systems • Sliding safety cover in front of the table • Custom die options as per requirements Bsdex N Rzwepfx Abpslc ✅ TECHNICAL SPECIFICATIONS (CEHP 400) Capacity: 400 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 3050 mm Press Depth: 3200 mm Press Height: 4700 mm Table Size: 2000×1200 mm Ram Face Size: 2000×1200 mm Stroke (Fixed): 200 mm Motor Power: 55 kW Weight: 51,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales support are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,200 mm, table length: 2,000 mm, pressing force: 300 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press used in cold forming operations such as punching, cutting, and die forming, powered by force generated through an eccentric mechanism. H-type (straight-side) eccentric presses provide high stability and process security in large bolster and heavy die applications thanks to their rigid frame structure. The CRONOSSTECH CEHP 300 – H-Type Eccentric Press (300 Ton) is designed for stable operation in high-volume production, focusing on die protection and operator safety. With its monoblock frame, 8-point guided slide system, hydraulic overload protection, and automatic lubrication infrastructure, it offers reliable performance for continuous production conditions. Key Advantages - Stable operation with large dies thanks to a 2000×1200 mm table size - Die/equipment protection with hydraulic overload safety device - Precision guidance with 8-point slide and balancer piston - Controlled and user-friendly operation with PLC + touchscreen interface - High operator safety with light curtain (photoelectric safety guard) Applications - Punching/cutting/forming operations requiring a large table - Mass production with automatic feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction frame • Pneumatic clutch-brake • T-slotted additional bolster plate • 8-point guided slide • Adjustable stroke on single connecting rod • Balancer piston on slide • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touchscreen LCD display • Reverse motor rotation • Hydraulic overload safety Bsdsx N Rxvjpfx Abpolc • Motorized slide adjustment • Light curtain safety guard • Enclosed oil tank with gear set • Double-solenoid safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap handling/disposal systems • Sliding safety door at the table front • Custom die manufacturing as required ✅ TECHNICAL SPECIFICATIONS (CEHP 300) Capacity: 300 Ton Table-Ram Distance: 500 mm Housing Width: 2,130 mm Ram Adjustment: 120 mm Press Width: 2,900 mm Press Depth: 2,750 mm Press Height: 4,700 mm Table Size: 2,000×1,200 mm Ram Face Size: 2,000×1,200 mm Stroke (Fixed): 200 mm Motor Power: 45 kW Weight: 41,000 kg ✅ MANUFACTURING / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed directly by CRONOSSTECH.

Condition: new, Year of construction: 2025, table width: 1,100 mm, table length: 2,000 mm, pressing force: 250 t, warranty duration: 24 months, stroke length: 200 mm, Equipment: safety light barrier, An eccentric press is a type of mechanical press powered by an eccentric mechanism, used for cold forming operations such as punching, cutting, and die forming. H-type (straight-side) eccentric presses provide high stability and process reliability in large table and heavy die applications thanks to their rigid body structures. The CRONOSSTECH CEHP 250 – H Type Eccentric Press 250 Ton is designed for stable operation, die protection, and operator safety in high-volume production. With its monoblock body, 8-point guided ram system, hydraulic overload protection, and automatic lubrication infrastructure, it delivers reliable performance suitable for continuous production conditions. Key Advantages: Blsdpfx Asx N Rwrsbpsc - Stable operation with large dies thanks to a 2000×1100 mm table size - Die/equipment protection with hydraulic overload protection - Precise guidance with 8-point guided ram + counterbalance piston - Controlled and user-friendly operation via PLC + touchscreen interface - High operator safety with photoelectric safety curtain Applications: - Punching/cutting/forming operations requiring a large table - Series production with automated feeding lines - Heavy die and high-tonnage production processes ✅ STANDARD FEATURES • Steel construction body • Pneumatic clutch brake • Additional T-slotted bolster plate • 8-point guided ram • Adjustable stroke on single connecting rod • Counterbalance piston on ram • Fully automatic fine lubrication system • PLC control system • Piano-type control panel • Touch LCD display • Motor reverse operation • Hydraulic overload protection • Motorized ram adjustment mechanism • Photoelectric safety curtain • Sealed oil tank with gear set • Double-coil safety valve • Compliance with CE standards ✅ OPTIONAL FEATURES • Press feeding systems • Scrap material discharge systems • Sliding safety cover in front of the table • Custom-designed dies as requested ✅ TECHNICAL SPECIFICATIONS (CEHP 250) Capacity: 250 Ton Table–Ram Distance: 500 mm Housing Width: 2130 mm Ram Adjustment: 120 mm Press Width: 2900 mm Press Depth: 2650 mm Press Height: 4600 mm Table Dimension: 2000×1100 mm Ram Face Size: 2000×1100 mm Stroke (Fixed): 200 mm Motor Power: 37 kW Weight: 38,000 kg ✅ PRODUCTION / SUPPLY NOTE This machine is manufactured by CRONOSSTECH in Turkey. Sales, commissioning, and after-sales processes are managed by CRONOSSTECH.