5
COMPACT SMALL BRIQUETTING PRESS CA 10-15 KG/H
DIAMETER APPROX. 5,5 CM
2,6 KW POWER CONSUMPTION
V 230/50 WITH HOUSEHOLD CURRENT OPERABLE
BUT ALSO OPERABLE WITH V400/50 AND NEUTRAL PLUG
ADJUSTABLE TONGS
MACHINE FOR HOME WORKERS OR SMALL PRODUCTION OPERATIONS
79eltgowp
footprint and weight.170x50x100cm, 90kg
1
SECOND-HAND BRIQUETTING MACHINE COSTRUZIONI NAZZARENO MOD. OLD 201-2P
- Productivity 100-150Kg/h
- Briquett diam. 70mm
B9vfsz9yl8
- Power 11Kw
- Year 2001 (CE)
1
The machine is in very good condition, ready to work.
B2ridnwe9a
Year of production 06.2016
machine number 2480
The machine will be available in February 2022 !!!
10
COMAFER DINAMIC 50N briquetting machine
- machine in stock
- after the technical review
- very good condition
- Italian production
Bplnj7qmqr
TECHNICAL PARAMETERS:
- engine power 4 kW
- briquette diameter 50 mm
- pressure force of the actuator 600 kg / cm2
- tank capacity 1m3
- briquette actuator diameter 100 mm
- capacity up to 50 k / h
- briquette length adjustment
Machine dimensions:
- length 170 cm
- width 130 cm
- height 155 cm
- weight 560 kg
8
Briquette diameter: 55 mm
Tank diameter: 750 mm
Productivity: 15/60 kg / h
Maximum briquette length: 50 mm
Number of cycles: 7 cycles / min
Number of cylinders: 3
Power supply: 40 V. 50 Hz
Engine power: 4 kW
Cmhfx9hy
Overall dimensions
Length: 1500 mm
Depth: 900 mm
Height: 1065 mm
Weight: 450 kg
1
BRIQUETTING MACHINE COMAFER MOD. DINAMIC 60/70
Bs9bi3ycds
matr. 108
CE Rules
average production kg/h 30/75
briquette diam. mm. 55
pump motor Kw 5,5
year 1997
5
The machine is in very good condition, ready to work.
Year of production 04.2016
machine number 2478
F2arxays0
The machine will be available in April 2022 !!!
2
Also different models avaliable !
H9wm07h9
1. Briquette Diameter: Ø 200mm
2. Capacity : 12.000 kg / hour ( Steel)
3. Preliminary Compression Ram Thrust: 50 tons
4. Main Compression Cylinder Thrust: 850 tons
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 10 - 12 sec
7. Electric Motor Power: 6x37=222 kW (Main Motors)
8. Machine Dimensions : 11.000mm x 10.000mm
9. Machine Weight: 60.000 kg
10. Screw drive feeders will fill the compression chamber automatically and built-in vibrating hoppe...
1
Also different models avaliable !
1. Briquette Diameter: Ø 80mm
2. Capacity : 700-900 kg/hour ( Copper )
3. Preliminary Compression Ram Thrust: 12.5 tons
4. Main Compression Cylinder Thrust: 250 tons ( 5 tonne / cm2 )
5. Maximum Working Pressure: 300 bars
Bvb0vhq2xo
6. Cycle Time : 12 - 14 sec
7. Electric Motor Power: 30 kW
8. Machine Dimensions (Width x Length x Height): 2200 mm x 2600 mm x 2800 mm
9. Machine Weight: 6.000 kg
10. Screw drive feeders will fill the compression chamber auto...
Also different models avaliable !
1. Briquette Diameter: Ø 160mm
2. Capacity : 4500 – 5500 kg / hour (Iron & Steel)
3. Preliminary Compression Ram Thrust: 50 tons
4. Main Compression Cylinder Thrust: 600 tons
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 12 - 14 sec
7. Electric Motor Power: 170 kW Overall
8. Machine Dimensions (Width x Length x Height): 5200mm x 8000mm x 3100mm
9. Machine Weight: 42.000 kg
10. Screw drive feeders will fill the compression chamber automatically and bui...
2
Also different models avaliable !
1. Briquette Diameter: Ø 120mm
2. Capacity : 1800 – 2200 kg / hour (Iron & Steel)
3. Preliminary Compression Ram Thrust: 15 tons
4. Main Compression Cylinder Thrust: 400 tons
5. Maximum Working Pressure: 300 bars
6. Cycle Time : 12 - 14 sec
7. Electric Motor Power: 75 kW
8. Machine Dimensions (Width x Length x Height): 3200mm x 4200mm x 3500mm
9. Machine Weight: 13.000 kg
10. Screw drive feeders will fill the compression chamber automatically and built-in vib...
7
3 Pcs Hydraulic Machine Clamp
Width 160mm
Total spring approx. 60cm
Yu2i8g
15
XYZ Proturn 425 SLX ProtoTRAK CNC Gap Bed Centre Lathe
ProtoTRAK SLX Control (2018)
Max’ Distance Between Centres 1250mm
Max Swing over Bed 400mm
Max’ Swing over Gap 700mm
Spindle Bore 80mm
Spindle Speeds 25 – 2500 rev/min
Spindle Motor 10hp / 7.5Kw
4 Way Indexing (Programmable) Tool Post
Tailstock MT5
S9uh3h
Tailstock Dia’ 75mm
Tailstock Travel 160m
Manufactered 2018
Supplied with:
Machine Handbooks
6 Toolholders (More available if required).
Tracking
Coolant
Worklight
Auto Lubrication
Stock...
10
Scandinavian & UK Machines is currently offering the SUMAB R-500 Stationary block machine, a highly productive concrete block machine
Technical details:
Automatic control model (with automatic operation equipment, including PLC, sensors, hydraulic valve's switching from manual to electrically operated).
Mtr8t8
Working pallet dimension: 1400 x 700 mm.
Useful area Max.: 1250 x 650 mm.
With the SUMAB R-500 stationary block making machine the following concrete products are produced in an efficie...
4
Type: TT-2100CMG
Description: Double-spindle parallel lathe with portal stacker. Automatic system for loading machined parts.
Manufacturer: TAKISAWA Machine Tool
Year of production: 2017
Control system: Fanuc 31i
Distance from spindles: 340 mm
Turning diameter: 240 mm
Max. part length: 135.5 mm
Axis travel: X axis: 142 mm, Z axis: 165 mm
Axis feed rates: X axis: 24 m./min., Z axis: 24 m./min.
Number of spindles: 2 pieces
Chuck: three-jaw hydraulic 8 inch (blind) 2 x
Spindle speed: 4,500 rpm. (3,...
2
Packing machine / Sealing machine for packaging of sandwich/sausage rolls, mouth caps, soap, plastic cutlery, wooden stirrers, pepper, tomato, bulbs, etc.
The machine can be easily connected to machines for small packaging of all kinds of solid materials (such as a face mask machine).
Suitable for rolls of film of 250 mm wide. The foil is sealed along the length and at the 2 ends.
The machine can be connected to 230V and a connection has already been made for connection to another machine
Ty...
7
Ingersoll Hansen Center 300 EDM CNC Erodiermaschine
Hersteller [manufacturer]: Ingersoll Hansen
Typ [ type]: Center 300
Bgwdgynkma
Steuerung [control unit]: MultiPulse Control
Baujahr[construction year]: 1997
+ Inkl. Handheld
+ Inkl. EROWA Preset Comfort 3D-22 / Robot X system EDM dynamic tooling system (optional)
+ Inkl. EROWA 3-D Koordinatenmesssysem (optional)
Vollständige Dokumentation ist vorhanden.
Besichtigung unter Strom kann kurzfristig erfolgen.
Für weitere Fragen stehen wir Ihne...
15
rotary blasting machine shot
Caoevgunfg
13
XYZ 710 3 AXIS VMC
Control Siemens 810D with Shopmill
Maximum workpiece weight 500kg
Table Size 760mm x 430mm
Traverses XYZ 710 x 450 x 510mm
Cutting Speed 20m/minute
Rapid Feedrates 20m/minute
Min - Max Height under Spindle 100
610mm
Spindle Motor Power 20Hp
Spindle Speed 8000rpm
Tool Change Capacity 24 Station
Tool Size BT40
Cg7vcpm9
Machine Dimensions 2250 x 2220 x 2550mm
Machine Weight 4000kg
6
Manufacturer SCM
Model / type of SUPERSET 23 machine
Year of manufacture 1992
Category Four-way planer
Location
Gorzów Wlkp.
Conditions of delivery
OWN RECEIVING
Cost of delivery
to be negotiated
Startup type
to be negotiated
Description
Comments
Cutting width mm 230
Cutting height mm 130
Number of spindles 6
Spindle layout down / right / left / up / up / down
Spindle speed max / min 6000
Motorized cutting height
Length of insertion table mm 2000
Feed rate max. M / min 35
More technical inf...
8
Width: 1.3 m
Weight: 5390 kg
B8grtzd3rx
SCM group IP 130 RR Four head sanding machine, complete with electric cabinets.
2
Perforating device
Creasing device
Mxd0fw
8
Doosan PUMA 2600 SY, turning center with motorized tools (7,5W), subspindle, Y-axis, barfeed interface, component catcher, chip conveyor, tool measurement arm, 7 bar cooling liquid pressure, Fanuc 0iTF - Manual Guide, Tool Load Monitoring.
Note only 240 hours on machine, we bought one size up right after this machine so it has been standing.
Max turning diameter 376 mm
Max turning length 720mm
Max bar diameter 76mm
Mxmw8g
Machine weight 6450 kg
10
Automatic single head saw, blade Ø 500 mm + conveyor K-3000 (length 3m) right hand side as standard
APPLICATION:
For cutting aluminum, plastics and wooden profiles
FEATURES:
- Hydropneumatic cutting
- Safe cuts thanks to protective cover with safety sensor
- 0°, 15°, 22.5°, 30°, 45°, 67.5° right and left fixed angles
- Possibility to cut at any intermediate angle between
- 67.5° to + 45°
- Speed regulation based on the type of profile to be cut
- Horizontal and vertical pneumatic clamps
STAND...
9
XYZ 1060HS 3 + 1 Axis Vertical Machining Centre
Siemens 840D Shop Mill Control
Table Size 1200 x 800mm
X Travel 1020mm
Y Travel 610mm
Z Travel 620mm
Linear way THK roller (not ball)
Spindle centre to column 670mm
Spindle to table 140 – 760mm
Column front to table centre 365 – 975mm
Rapid feed XYZ axis 43 M / min
Cutting feed rates 1 – 10000 mm / min
Max table load 800 Kg
Spindle speed 150 – 12000 rpm
Spindle Motor Maximum Rating: 16Kw
Spindle Motor Duty Cycle: 12Kw
Spindle Taper BT 40
Tool magaz...
12
1. Machine Data:
• Product designation: MFZ 570.2
• 2-spindle horizontal 4-axis machining center with 2
independent z-axes
• Control SINUMERIK 840D Solution Line
• Machine dimensions without coolant system and
Chip conveyor L x W x H approx. 5.10m x 3.05m x 2.8m
• Weight approx. 21000Kg (machine without coolant system and
Accesories)
• Travel X-axis: 450 mm
• Travel Y-axis: 500 mm
• Travel Z-axes: 450 mm
• Spindle distance: 450 mm
• Rapid...
3
Herewith we offer our ABO bread cutting machine
knives in the cutting machine are 12,5mm
If you have more questions about this machine please send us an email or call us on workdays.
Cak9w72zgp
1
Turning Ø over bed 330 mm; Turning Ø over bridge 430 mm: Turning Ø over slide 200 mm; Turning length 1000 mm; Bed width 186 mm; Spindle mounting MT5; Spindle bore 38 mm; Speeds 70-2000 rpm; Metric thread 0.4-7mm; Inch thread 4-56 T.P.I; Longitudinal feeds 0.052-1.392 mm/rev;
Cazspind3v
cross feeds 0.009-0.253 mm/rev; tailstock quill travel 110 mm;
Tailstock mount MT3;
Weight approx. 670 kg; Motor 1,5 kW / 400 V
With: 3-B-chuck; chip tray and chip wall; tools; coolant device; foot brake; mitl. Ce...
8
The tool washing machine is in working condition.
Bt7xcqker8
8
Hang 115 G 3P Punching and eyeletting machine of the back eyelet
Producer: Hang Germany
Very good condition, after the review.
The machine is used for crimping eyelets on the back of a binder (Griffloch)
Separate punching and eyelet tools punch holes and align eyelets with a single stroke in a fast, cam-driven sequence of movements
Ca9bsmxr3g
Easy to replace, automatic eyelet guide
Weight 340 kg
380V power supply
15
ProtoTRAK SLX Control
Max’ Distance Between Centres 2000mm
Max Swing over Bed 400mm
Max’ Swing over Gap 700mm
Spindle Bore 80mm
Gyrvhw
Spindle Speeds 25 – 2500 rev/min
Spindle Motor 10hp / 7.5Kw
Tailstock MT5
Tailstock Dia’ 75mm
Tailstock Travel 160mm
Manufactured 2014
Supplied with:
Machine Handbooks
3 Toolholders (More available if required).
Tracking
Quick Change Tool Post
2 Fixed Steadies
Coolant
Worklight
Auto Lubrication
Jet Machinery Stock Number#: 78525
3
We sell tranpsporter of Transporter for straw bales.Transporter for straw bales (round, quadrate) never used at our place.15 000 euro EXW LV
B3gxvs3z8d
8
The machine is specially designed for packing wet tissue,alcohol pad ,cleaning tissue ,nursing tissue etc. It runs fast and stably. The machine can automatically complete: folding wet tissue , cutting, injecting chemical liquid, film slitting, bag making, heat sealing, counting, printingbatch number, finished product output, and so on.
Cblzwcmzzt
9
It is totally new machine with 100 working hours.
B7vciqium2
15
CMT Cheese Cooling and Stretching Line Included Moulding Accessories. 1400 kg/H
Condition: Excellent/ Boiler Tanks/ Accessories.
Iz0b0lvds
7
SEMIAUTOMATIC MACHINE FOR FIXING RADO AND FINGER HOLE EYELETS ON FILES OM 12/C
Producer: Industria Meccanica Lombarda srl Italy
Very good condition, the machine is ready for production.
IML OM12 / C – semi-automatic machine for die cutting and crimping rado eyelets and ridge eyelets
Max format 750x390mm
Cardboard thickness 0.5-3mm
Weight 210 kg
Pneumatic power supply + 220V.
Ba7nvg2o
5
V-nailer
Brand: Cassese
Model: CS 830
Techn info:
Max air pressure: 7 bar
Stock no: 2000937
Cj3xfteo
Price: 5000 SEK
15
Pellet press line OGM 1,5. Production up to 2 ton per hour.
full sett. more by mobile.
we sell because shortage of sawn dust.
Mw2nks
7
Machine si suitable for automatick packing of liquid of foods, medicine and cemicals,such as pesticide, shampoo, body foam , bath lotion, facial cream, ingerdient oil, fruit sauce, tomate ketchup and honey shower gel, skin lotion, toothpaste, cosmetic cream, fruit jam, edible oil, soy etc
Cblyoxrtfp
Max. cutting force 30 tonnes
Cutting head 400 x 500 mm
Bed size 2300 x 510 mm
Stroke length (adjustable) 10 - 120 mm
Bnlwiwyfgv
Belt width 1800 mm
Operating height 990 mm
Pump motor capacity 1.1 kW 1.5HP
Approx.weight 3560 Kg
Traverse and feed drives closed loop, D.C. servo motors
Feed System “Ping and grab” clamp feed - two fixed,
one travelling clamp
Nylon belt cutting and feeding system
Intermediate cutting board and boar...
Edge polishing machine Edge polisher
Montresor Lara 80
Year 2005
Bullnose polisher full C
8 Polishing heads
2 Bevel up
2 Bevel down
Calibrating and cutting unit
Cblkyure9r
Cleaning/Bushhammering unit
Machine is in good condition
5
5-axis travelling column machining centre
- SAMAG SFZ2500-
with swivel head and internal rotary table (Dm:1000mm)
X:2500mm
Y:1000mm
Z:1000mm
Spindle: SK50 max. 12,000rpm 54kW
Tool changer: 60-fold
Ezc2ngz
Control: Heidenhain TNC640
Coolant system with paper belt filter
Internal coolant supply: 40bar (max. 80bar)
Internal air supply through the spindle
3D touch probes
Kinematics Opt
The machine is available at short notice and can be inspected and tested at the factory.