Briquette press Prodeco E 70 V in pristine condition.
Ready to use.
Briquette diameter 70 mm, motor kW 11 IE3 (high efficiency).
Production capacity 80-160 kg / h.
Dimensions without Hopper: H 1.500 mm, 2000 mm, 1,370 mm. 1.400 kg.
Ifdnoceke
Hydraulic machine;
Approx. 7 cycles/min. at full operational capability of the machine;
3 x cylinder;
1 x vise in Mono block design;
Briquette length at the each output of maximum 70 mm;
1 capacitive filling level measurement;
Standard Hopper: Mass base 1,2...
The efficient and compact Hydraulic Briquette Press is sold by it's owner that has worked and looked after it. This machine can make your production left overs into highly appreciated bio fuel products.
Technical specification:
Input materials: saw dust, wood chips, wood shavings of various hard and soft wood, as well as peat, crushed off cuts, old wood and other production residues.
Produced product: RUF standard (square) briquettes, 150x100x60mm
Packaged product: 12 pieces is a 10 kg bag
Prod...
Hydraulic briquetting press with 5,5 kW main motor. It produces 50mm diameter briquettes. Capacity of the machine is: 30-50 kg/hour. The raw material hopper is 1m3, and has an agitator on the bottom. The machine has an oli cooler for the continous work.
2sfpxy
Complete waste press unit
with Briquete press RACINE HYDRAULIK
Bnebfbf9eg
Scren compactor
Filter
Radial Fan
Air extractor & seperator
Spänex briquetting press
Dw7fisria
Suction system Suction extraction Filter tower with briquetting press Briquetting press
Lgzpxv37
Schuko
Type: Compacto 1100
Year: 1993
Connected load: 4 KW
Briquette diameter : 60 mm
incl. oil cooler for continuous operation
Suction filter with 35 filter bags D: 230mm L:290cm
Dimensions box approx. Lx W x H 200 x 140 x 250 cm
with filter approx. 200 x 140 x 580 cm (the height can be varied by the filter length) Filters are ordered according to customer requirements. )
Suction connection 2x DN 3...
Extraction system with briquette press
Obdhn
Suction
- AL-KO Profi - Jet BG 2 + 2
- Year of construction 2001
- Capacity 20,000m³ / h
- Filter surface 158.4 m²
- Max negative pressure 3,000 Pa
- Compressed air connection 6 bar
- Automatic filter cleaning by means of compressed air
- Engine power 11kW
Briquette press
- Weima TH 400
- Year of construction 2001
- 7.5kW
- 400V
- Briquettes diameter 50mm
- 60 / 80kg per hour
Available from October price without dismantling!
Briquette press Gross
Machine has been serviced
Main motor 5.5kw
Production max 70 kg/h depending the raw material
Diameter of Briquette 60mm
Weight 750kg
diamensions 1315mm x 1900mm x H1410mm
Jcdm8a7
Briquetting press FOX 50 for wood chips and other materials
Briquette diameter: 50 mm
Front bushing: 50 mm
Briquette stroke max.: 40 mm
Briquette stroke opt.: 40 mm
Throughput capacity (depending on material): 30-60 kg/h*
*dependent on the bulk density
*based on a bulk density of 200 kg per cubic metre
Engine power: 5,5 kW
length: 1680 mm
width: 1100 mm
height: 1500 mm
Weight: 680 kg
Oil quantity: 110 litres
Silo diameter: 1000 mm
silo content: approx. 0,7 qbm
Pump: 27 litres
Hydraulic precompre...
Demonstration machine with 20 operating hours
* NEW !!! Also available in 230 Volt,
Engine then 3 kW instead of 2.2 kW,
Extra charge + 590 € net.
Technical data:
Briquette dimensions: approx. 30 x 30 mm (square),
Briquette length: 5-40 mm *dependent on material
Throughput capacity: up to 20 kg/h. *material-dependent
Dimensions of the machine approx.: 137 x 75 x 148 cm (length x width x height),
Weight of the machine: approx. 250 kg,
Capacity of the silo: approx. 250 litres,
Motor: 2.2 kW, 4...
Briquette press BP500A in very good condition, 1800 mth
Dwr9ky
The press can be inspected on site and a test pressing can be carried out with your material.
The press is built on a forklift frame for easy transfer and only needs a 32 A socket to start operation.
It has only run for 2901 operating hours. The press is fully automatic and has been in 24 hour operation. It is sold because the briquette form is too large for our conveyors.
Bjcmdctpki
CF NIELSEN BPU 3200 briquetting unit with BS 350 briquette saw in very good condition (with appr. 2000 working hours) main features:
BPU 3200 briquetting unit
Self contained unit including frame, briquetting press, buffer silo 0,4 [m3], dosing screw and control panel.
22 kW main motor 1400 RPM 3x400 V 50 Hz (1750 RPM 3x480 V 60 Hz USA/Canada)
Feeding unit, which pre-compresses the raw material and places it in front of the piston in order to give each piston stroke an optimum output at a st...
Chip press model JEB-2 VERSION 110-65
- capacity in steel: 25-70 Kg/h
Bfw9nheacv
- Complete with user and maintenance manual and CE mark
- automatic change of chip processing long- short
- automatic start/stop with and without chips
- Device for detecting a blocked screw conveyor
via PLC control by alarm and message on the display
- Integration in CNC control optionally possible
- Oil return for JEB-2
Capacity: max 45to/h
Briquette size: 40x50mm
Power: 90 kW
Weight: ca. 35000 kg
2nxjnx7nk
Special price for exhibition machine Holz-Handwerk 20
Option: cooling - recommended for continuous operation
+3.900 € net
Goods tariff number: 84793010
Briquette diameter: 65 mm
Front bushing: 65 mm
Briquette stroke max.: 50 mm
Briquette stroke opt.: 50 mm
Output (depending on material): 40-110 kg/h*
in the last test approx. 85 kg/h.
*dependent on the bulk density
*based on a bulk density of 200 kg per cubic metre
.
Engine power: 5,5 kW
400 Volt / 50 Hz / 3-phase
length: 1925 mm
width: 1100 mm
h...
Mobile Dust Extraction System inclusive Briquette Press AL-KO Power Unit 200 P - BP
New machinery with guarantee
3 kW / 3Ph
400 Volt / 50 Hz
3010 m³/ h (max)
2pxiqu
nominal volume flow 2262 m³/ h
filter 13,8 m²
briquette diameter 40 mm
for more information please contact us
or see PDF attached
Technical characteristics
Hydraulic pusher
matériel haut de gamme
moteur hydraulique 11 kW
Ø briquette 70 mm
Bmdkihy9dm
production horaire 150 kg max
vis horizontale d’amenage des copeaux
gestion température d’huile
mâchoires chromées
contrôle SPS
Power and Motors
Overall dimensions
Technical specifications:
Briquette dimensions: 50 mm (cylindrical)
Nuhor
Dimensions of the machine: 186 x 89 x 110 cm (l x w x h)
Weight of the machine: about 400 kg
Volume of the silo: approx. 330 liters
Engine: 4 kW
Oil cooler: no
Start-stop automatic: no
Noise emission: 68 dB
Strippit single station non cnc punch press
With plenty of tooling
Ocs3x
TONNAGE …………….. 30 TON
THROAT DEPTH …………… 30″
MAXIMUM HOLE DIAMETER …………… 3.5″ DIA. IN 12 GA.
MAXIMUM MATERIAL THICKNESS …………. 1″ DIA. IN .250
TABLE SIZE …………….. 72″ W X 48″ D
SHEET SIZE …………….. 30″ X 30″
STROKE LENGTH …………….. 5/8″
HITS PER MINUTE …………… 165
MOTOR ……………. 1 HP
WEIGHT …………… 3,000 KGS
50 mm
roll diameter 150 mm
revolutions per minute 10 U/min
voltage 400 V / 50 V
adjustment movement hydraulic up to 120 mm
motor speed 1400 U/min
total power requirement 1,5 kW
weight of the machine ca. 430 kg
Tlvmt3hi
dimensions of the machine ca. 1200 x 800 x 1750 mm
Spindle Press Krause KgS
Jiciqnz
Year - Serial-No. KgS
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
Multifunctional bookbinding press
The machine can be used for many bookbinding operations, such as: squeezing the backs of brochures, clamping metal spirals, clamping calendar strips.
Intuitive operation
Boobkxo3kq
Security covers
Pneumatic supply
Control by a foot pedal
Solid construction.
pressure 60 t
stroke 380 mm
table surface area 750 x 260 mm
press capacity 588 kN
Pressure power 259 bar
working width 750 mm
pressing speed 2,07 mm/sec
feed speeds 8,69 mm/sec
return speed 10,79 mm/sec
Ø 210 mm
total power requirement 1,5 kW
weight of the machine ca. 0,6 t
dimensions of the machine ca. 1,3 x 0,8 x 2,1 m
This 60 ton motorized workshop press with sliding cylinder is very robustly
built and manufactured in the Netherlands. The hydraulics work extremely
precisely in both elec...
pressure 100 t
distance between columns 1500 mm
stroke 380 mm
working feed 2,47 mm/sec
700
adjustment of press crosshead 1500 mm
slide adjustment -horizontal 1740 mm
feed speeds 7,54 mm/sec
return speed 9,06 mm/sec
Pressure power 258 bar
table-size 1740 x 1396 mm
total power requirement 2,2 kW
weight of the machine ca. 2060 kg
dimensions of the machine ca. 1,74 x 2,07 x 2,04 m
This 100 ton straightening press has a manually movable portal and is
exclusively made in the Netherlands.
Bojaal9...
pressure:400 t
distance between columns:1060 mm
Fe7ib0b
stroke:450 mm
no. of strokes:15 - 30 /min
distance table/ram, max. stroke up, adjustment up:1160 mm
table surface area:1000 x 700 mm
capacity of ejector in table:2 x 16 t
ejector stroke of ejector in table:125 mm
Die cushion pressure in table:120 t
Die cushion stroke in table:2 mm
capacity of ejector in ram:2 x 4 t
stroke of ejector in ram:100 mm
ram surface:1000 x 700 mm
column travel -side:630 mm
power capacity:55,0 kW
weight:50,0 t
die c...
Gantry straightening press
B3ucfdl
gt;gt; For straighte
Spindel Press Krause
Year - Serial-No. 190675
-We would be very pleased with your visit - more machines on Stock-
-Available Immediately-
Eoaxjnybs
-Can be inspect-
-On Stock Emskirchen / Nürnberg - Can be test-
⢠Minimal footprint
⢠Height continuously adjustable
Bjfhulirbn
⢠Suitable for 2- and 4-up
Low-cost shipping The Smart Stacker XXS has been developed in order to enable CtP users in the 2- and 4-page format a space-saving and cost-effective possibility of plate stacking. On a footprint of only 640 x 658 mm, up to 100 plates are automatically stacked by that stable âlightweightâ made in Germany. Low-cost shipping due to a package size of 118 x 78 x 17 cm (L x W + H) and weight of only 1...
1 x Xerox 700 Digital Colour Press included
- Fiery Controller E10-02
- Booklet finisher JGW-1 + feeding unit
Counter reading: Total approx. 2,017,686, thereof color 1,605,360, SW approx. 412,326
Betdf78fn2
Features:
- 71 DIN A4 pages / minute B/W
- 71 DIN A4 pages / minute Colour
- Paper formats: DIN A5 - DIN A3
- Grammages: 64 - 300 g/m²
- Cassette: Max. 5,900 sheets
Manufacturer information:
The ideal solution for digital production printing
The Xerox 700 Digital Color Press opens up pr...
pressure 10 t
stroke 30 mm
table surface area 105 x 366 mm
distance between columns 366 mm
column daylight 70 mm
32 mm
total power requirement - kW
Benmuvyijl
weight of the machine ca. 55 kg
dimensions of the machine ca. 500 x 700 x 1030 mm
pressure:400 t
distance between columns:1100 mm
stroke:250 mm
2wdpz2jj
no. of strokes:25 - 75 /min
distance table/ram, max. stroke up, adjustment up:900 mm
table surface area:1100 x 965 mm
capacity of ejector in table:30 t
ejector stroke of ejector in table:80 mm
capacity of ejector in ram:3 t
stroke of ejector in ram:60 / 70 mm
ram surface:980 x 800 mm
column travel -side:800 mm
ram adjustment:20 mm
power capacity:80,0 + 5,5 kW
weight:47,0 t
Dimensions (WxDxH):3,5 x 3,3 x 6,0 m
weight of switch...
Machine has been repainted in white
Cmndrsxm
Horizonta
pressure 100 t
stroke 380 mm
table: 1740 x 996 mm m
daylight between the columns 1050 mm
daylight - vertical 600 mm
total power requirement 2,2 kW
Gvufe0
weight of the machine ca. 1,6 t
dimensions of the machine ca. 1,7 x 1,7 x 2,2 m
Cutting length : mm 3100
Cutting thickness : mm 4
Cable : mm 500
Steel base supports sheet metal.
Motorized rear register.
Bmc9kvfx0x
Cutting angle adjustment.
Cutting blade stroke adjustment.
Sheet metal support brackets supplied.
In this offer you purchase a used colour production system " Xerox® 700 Digital Colour Press".
Up to 70 pages DIN A4 or 35 pages DIN A3 per minute in b/w and colour
Object of sale:
1 x Xerox® 700 Digital Colour Press with the following equipment:
counter reading:
incl. Paperdeck PCF-1
incl. large capacity stacker (LCS-1 with JGW-1)
incl. Fiery Controller for Xerox 700 E10-02 network printing and scan function
Counter readings:
Total: approx. 3,046,951 pages
Colour: Approx. ...
pressure 100 t
stroke 380 mm
tank capacity 54 l
pressing speed 2,47 mm/sec
column daylight 750 mm
feed speeds 7,54 mm/sec
return speed 9,06 mm/sec
Pressure power 258 bar
engine output 2,2 kW
speeds: 2
220 mm
Benmyiglzx
range L-W-H 1665 x 865 x 2140 mm
weight of the machine ca. 970 kg
Press-vite ironing / steam table 4 whirlpool hoods, 9000W BJ. 2002, Pr12LP +.
You buy a hanger system
Ironing / steam table press vite, with 4 adjustable hot tub covers, and 2 steam generator / en working width approx. 340 cm, 380VPr12LP - 9000W
BJ 23.10.2002
Dv7r7m
Control GE VAT20 U20NOK7S
BJ. 16.02.2002
Find more articles in our shop!
Article number 17746;
For inquiries please specify;
Gantry straightening press
Bhf2m2eh2z
gt;gt; For straighteni
pressure 50 t
stroke 250 mm
throat 265 mm
table: 700 x 450
ram surface 550 x 300 mm
total power requirement 4 kW
weight of the machine ca. 1,7 t
Beojfhitbb
PRESS FARELL 150 TN FOR WOOL ... THIS PRESS MAKE SPECIAL MESURES BALES FOR EXPORT IN FCL... BALE MESURES 1170 X 720 X 1150MM WEIGHT BETWEEN 300/350 KG EACH IN CLEAN WOOL DEPENDS ON KIND OF WOL , HIGH PRODUCTION 900/1000 KG HOUR, WITH HIS OWN STORAGE FILTRED MATERIAL, FILTRET ACROSS A CONDENSER SPECIAL WHO DEDUST THE MATERIAL BEFORE GOES TO STAORAGE PRESS PLACE, AND WITH TRUTZSCHSLER AUTOMATIC FILTER FOR THE AIR ABSORBED BY THE CONDENSER.... REALLY GOOD AUTOMATIC INSTALLATION.
Bpoh98xw
In this offer you will purchase a used colour production system "Xerox 700 Digital Colour Press
Object of sale:
1 x Xerox 700 Digital Colour Press with the following equipment:
incl. Paperdeck JCF-1
incl. Finisher JW-1
incl. booklet finisher JFN-1
incl. Fiery EX700
counter readings:
Total: approx. 3,907,279 pages
Colour: Approx. 2,494,352 pages
Black: Approx. 1,412,927 pages
Condition:
This offer is for a used device, which under certain circumstances may show signs of...
pressure 200 t
stroke 400 mm
tank capacity 51 l
pressing speed 1,84 mm/sec
column daylight 1300 mm
feed speeds 5,73 mm/sec
return speed 7,08 mm/sec
Crplgbr
Pressure power 243 bar
engine output 3,0 kW
speeds: 2
325 mm
range L-W-H 1925 x 975 x 2270 mm
weight of the machine ca. 1690 kg
Eccentric press Make V & O Press Type FO 43 built 1980
Bkjhd8j3zf
Serial number 25ST-593 Pressing force approx. 25 tons
Schirmer + Plate
Decontinuous bandpress for sandw
Bht8b3f8
Table size 2500 x 1300 mm
Total thrust 70 Ton
Stroke – total opening 400 mm
Vqos9i
N. 4 of cylinders
Pistons D 70 mm
Approx. weight 2400 kg
Fabricated assembled steel platen max. temp up to 120 ° C max working pressure 3-5 kg/m2
Heating medium pressure 2,5 bar, it is composed by:
G) ALUMINIUM COVERING FOR A BETTER SURFACE FINISHING AND A BETTER HEAT PROPAGATION
H) FLAT GAUGED STEEL SHEET
I) Coil of piping for hot water/oil circulation
J) Reinforcement piping
K) Flat gauged steel plate, only fo...
Presses Lignum1 - Second hand 2010
Make:
Lignum1
Model:
-
Description:
2010 LIGNUM PRESS to the corps
LIGNUM1 in Kłodawa, Poland
Location
Gorzów Wlkp.
Conditions of delivery
OWN RECEIPT
Cost of delivery
Customer cover
Ddmfitn
Start type
to be agreed
Description
Comments
BODY PRESS FOR CHAIRS 8 PIECES OF ACTUATORS FI 70 mm BINDING SPEED 560 mm BOND HEIGHT 900 mm
In this offer you will purchase a used colour production system "Xerox Color C75 Press ".
Object of sale:
1 x Xerox Color C75 Press with the following equipment:
incl. Paperdeck A-CF01
incl. Fiery E200-01
incl. Finisher A-FN02
counter readings:
Total: approx. 1,187,238 pages
Colour: Approx. 879,258 pages
Mvkal8
Black: Approx. 307,980 pages
Condition:
This offer is for a used device, which under certain circumstances may show signs of use.
(minor scratches or yellowing).
...