Used Briqutteing Machine for sale (64,517)

Condition: used, Year of construction: 1996, functionality: limited functionality, travel distance X-axis: 630 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 650 mm, controller model: Fanuc MSX-516, rotational speed (max.): 12,000 rpm, The P8 power supply, valued at €1,500, was only replaced in August 2024! The spindle was repaired in 2017 and has mostly only been used for single-layer operation since then! Iijdozcuyijpfx Ag Ujc TECHNICAL DETAILS Travel range X-axis: 630 mm Travel range Y-axis: 600 mm Travel range Z-axis: 650 mm Feed length X-axis: 630 mm Feed length Y-axis: 600 mm Feed length Z-axis: 650 mm Table width: 500 mm Table length: 500 mm Number of pallets: 2 Maximum speed: 12,000 rpm Number of tool magazine slots: 60 (BT40) MACHINE DETAILS Control: Fanuc MSX-516 Phases: 3 Frequency: 50 Hz Voltage: AC 200 V Full load current: 181 A Note: The rapid traverse rate of the X-axis is reduced by 20% to extend the service life of the telescopic guides. The sealing ring during pallet changes is likely defective. The seller temporarily resolved this by inserting a ball valve in between when the pallets needed to be changed. EQUIPMENT Documentation/Manual Chip conveyor

Condition: ready for operation (used), Year of construction: 2014, operating hours: 2,802 h, functionality: fully functional, machine/vehicle number: 12230000107, spindle speed (max.): 10,000 rpm, travel distance X-axis: 650 mm, travel distance Y-axis: 650 mm, travel distance Z-axis: 560 mm, controller model: Siemens 840D sl, laser power: 100 W, Highly accurate 5-axis milling, laser texturing, and laser paint removal on a precision machine! TECHNICAL DETAILS Travel range X-axis: 650 mm Travel range Y-axis: 650 mm Travel range Z-axis: 560 mm Main spindle speed range: 20 - 10,000 rpm Main spindle drive power: 13 / 9 kW Torque: max. 83 / 57 Nm Tool holder: HSK A63 according to DIN 69893 Table clamping surface: 800 x 650 mm Table load capacity: max. 600 kg Swivel range B-axis: ± 120° Rotational range C-axis: 360° T-slots: 9 x 14 x 63 mm Workpiece dimensions: max. 650 (840) x 500 mm Number of tool positions: 30 Tool weight: max. 6 kg Tool diameter: max. 80 mm Tool diameter with free neighboring pocket: max. 160 mm Tool length: max. 315 mm Tool change time (tool to tool): 1.6 s Tool change time (chip to chip): 8.0 s Isdjzcxwrepfx Ag Usic Rapid traverse: 40 m/min Feed force: 7 / 13 / 10 kN Feed rate: 1 - 40,000 mm/min MACHINE DETAILS Control system: Siemens 840D sl Axes: 5 Total power consumption: 24 kVA Dimensions & Weight Footprint: approx. 4.5 x 3.5 x 2.3 m Machine weight: approx. 11.5 t Operating hours milling machine Spindle hours (according to counter): 4,738 h Power-on hours (according to counter): 18,703 h Operating hours laser Spindle hours (according to counter): 2,802 h Power-on hours (according to counter): 6,177 h EQUIPMENT Swiveling rotary table Laser head 100 W Coolant system Electronic handwheel Documentation

Condition: ready for operation (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 15125250184, travel distance X-axis: 2,500 mm, travel distance Y-axis: 920 mm, travel distance Z-axis: 820 mm, controller model: Heidenhain iTNC 530, spindle speed (max.): 18,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel in X-axis: 2,500 mm Travel in Y-axis: 920 mm Travel in Z-axis: 820 mm B-axis rotation: 105° Table length: 3,100 mm Table width: 900 mm Iijdpezdkhkofx Ag Ujc Table length: 3,100 mm Table width: 900 mm Tool holder: SK40 Max. spindle speed: 18,000 rpm MACHINE DETAILS Control system: Heidenhain iTNC 530 Dimensions & Weight Dimensions (L x W x H): 7,500 x 4,500 x 300 mm Net weight: 22,000 kg Shipping packages: 3 EQUIPMENT External coolant system Chip conveyor Tool magazine (30 pieces)

Condition: ready for operation (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: 216327, travel distance X-axis: 1,660 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, controller model: Mazatrol 640M, spindle speed (max.): 12,000 rpm, TECHNICAL DETAILS Number of axes: 3 Travel range, X-axis: 1,660 mm Travel range, Y-axis: 510 mm Travel range, Z-axis: 510 mm Table length: 2,000 mm Table width: 510 mm Tool holder: ISO40 Max. spindle speed: 12,000 rpm Ijdpfozdf Dhox Ag Uoic MACHINE DETAILS Control system: Mazatrol 640M Operating time according to control system display: 40,843 h Dimensions & Weight Dimensions (L x W x H): 5,120 x 3,000 x 2,800 mm Unladen weight: 8,250 kg EQUIPMENT Chip conveyor Tool magazine with 30 positions Tools included

Condition: ready for operation (used), Year of construction: 2005, operating hours: 10,197 h, functionality: fully functional, travel distance X-axis: 1,300 mm, travel distance Y-axis: 710 mm, travel distance Z-axis: 710 mm, controller model: Fanuc 18i-MB, spindle speed (max.): 10,000 rpm, TECHNICAL DETAILS Number of axes: 4 Travel in X-axis: 1,300 mm Travel in Y-axis: 710 mm Travel in Z-axis: 710 mm B-axis rotation: 360° Table length: 1,500 mm Table width: 660 mm Tool holder: ISO40 Max. spindle speed: 10,000 rpm MACHINE DETAILS Control system: Fanuc 18i-MB Power: 38.4 kW Dimensions & Weight Dimensions (L x W x H): 4,300 x 3,250 x 3,080 mm Shipping weight: 7,000 kg Shipping packages: 4 Operating hours: 10,197 h EQUIPMENT Iiedszdfgpjpfx Ag Uec External coolant system Chip conveyor Tool magazine with 32 positions CE marking

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, machine/vehicle number: 308, table width: 850 mm, table length: 1,250 mm, stroke length: 200 mm, pressing force: 42 t, empty load weight: 1,000 kg, TECHNICAL DETAILS Iodezdfb Tepfx Ag Ujic Bending capacity: 42 t Max. bending stroke: 200 mm Table length: 1,250 mm Table width: 850 mm Stroke length: 300 mm Stroke width: 200 mm MACHINE DETAILS Motor power: 4.0 kW Dimensions & Weight Dimensions (L x W x H): 1,500 x 2,500 x 1,800 mm Shipping weight: 1,000 kg Shipping packages: 2 units EQUIPMENT Documentation CE marking

Condition: ready for operation (used), Year of construction: 2005, operating hours: 44,673 h, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 900 mm, travel distance Z-axis: 900 mm, controller model: OSP-E100M, spindle speed (max.): 12,000 rpm, number of slots in tool magazine: 320, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine on schedule in week 30 of 2026! TECHNICAL DETAILS X-axis travel: 1,000 mm Y-axis travel: 900 mm Z-axis travel: 900 mm Spindle speed: 12,000 rpm Tool holder: BT50 Tool positions: 320 Tool positions for 600 mm tools: 80 Part accuracy: 0.001° MACHINE DETAILS Control system: OSP-E100M Number of axes: 4 Coolant pressure: 30 bar Operating hours NC cycle time: 71,235 h Spindle running time: 56,241 h Machining time: 44,673 h EQUIPMENT ATC with 320 positions 80 positions for 600 mm tools Iiedpfx Agezd Tapo Uoc Balluff writing/reading system NC table Absolute scales in X, Y, and Z Renishaw MP10 measuring probe Tool breakage monitoring MOP tool monitoring 30-bar coolant system Mayfran Consep 2000 chip conveyor

Condition: ready for operation (used), Year of construction: 2009, operating hours: 3,275 h, functionality: fully functional, travel distance X-axis: 1,100 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 510 mm, table load: 1,000 kg, rotational speed (max.): 12,000 rpm, No minimum price – guaranteed sale to the highest bidder! Iodpfjzdkgasx Ag Ueic Machine with only 3,275 spindle hours! TECHNICAL DETAILS Travel in X-axis: 1,100 mm Travel in Y-axis: 600 mm Travel in Z-axis: 510 mm Table size: 1,300 x 600 mm T-slots: 6 (size 18) Maximum table load: 1,000 kg Spindle speed range: 60 - 12,000 rpm Drive power: 10 / 17 kW Spindle mounting: ISO 40 / DIN 69871A Magazine: 32 positions MACHINE DETAILS Drive power: 10 / 17 kW Internal cooling (IKZ): 20 bar Coolant tank volume: 480 l Spindle hours: 3,275 h Machine operating hours: 15,883 h Control operating hours: 17,706 h

Condition: ready for operation (used), Year of construction: 2008, operating hours: 37,000 h, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 3,000 mm, travel distance Z-axis: 1,750 mm, spindle speed (max.): 20,000 rpm, controller model: Heidenhain iTNC 530, The machine was previously owned by a well-established Formula 1 team from Central Europe! The milling head has been freshly inspected by the machine manufacturer, making it partially overhauled and fully functional. The machine was always covered by a maintenance contract with the manufacturer. TECHNICAL DETAILS Travel range X-axis: 5,000 mm Travel range Y-axis: 3,000 mm Travel range Z-axis: 1,750 mm Feed rate X-axis: 65 m/min Feed rate Y-axis: 65 m/min Feed rate Z-axis: 65 m/min Spindle speed max.: 20,000 rpm Axis acceleration: 5 m/s² Torque max.: 63 Nm Holding torque (clamped) A & C axis: 2,000 Nm Tool interface: HSK 63A MACHINE DETAILS Control system: Heidenhain iTNC 530 Handwheel: HR420 Spindle hours: approx. 37,000 h Power-on hours: approx. 83,000 h Spindle power: 20 kW Iisdjzcqncjpfx Ag Uec Power consumption: 130 kW Voltage: 400 V Frequency: 50 Hz Dimensions & Weight Footprint without peripherals (L x W x H): 7,500 x 8,500 x 6,600 mm Total weight: 90,000 kg EQUIPMENT 2-axis tilting milling head 5 Speed infinitely adjustable Minimum quantity lubrication 50-position tool changer Work area enclosure Note: The machine table is not included in the scope of supply, and the drive cables for the X, Y, and Z motors need to be replaced due to their age. Currently, the machine is disassembled and stored. However, an inspection is still possible at any time by prior arrangement.

Condition: like new (used), Year of construction: 2023, 2023 Unused VLB Group EB-53RH Fully Electric CNC Tube Bender With VLB 3D Software Iiodpfx Aszfqffjg Usc Summary Maximum Capacity (45kg/mm²) Ø53 x 2mm. Controlled Axes 'X' Precision=±0.05mm, 'Y' Precision=± 0.05°, 'Z' Precision=± 0.05°. Maximum Bending Radius 275mm. Installed Power 35.5kW. Voltage 380-400V. S/No. V00656 (2023). NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice. With Support Blocks, Tooling & Foot Switches. Approx Foot Print 6,200 x 1,800mm. Weight 5,100kg. NOTE: This item will be loaded to buyer's vehicle, a loading charge of £250 + VAT will be added to the buyer's invoice.

Condition: used, Year of construction: 2005, 2005 Horkos MOH 5-Axis Oil Hole Drilling Machine Horkos MOH 5-Axis Oil Hole Drilling Machine X/Y/Z 500/150/765mm, B-Axis rotary table with A-Axis unit for part size 630 x dia 190mm, spindle 8.000rpm / HSK-63-A, 12-Pos-ATC, LxW xH, CNC GE-FANUC 160i-MB, LxWxH,ca. 2x4x3m, Origin France, Location : 900 avenue de Paris, Billy Berclau, FRA-NA 62138 Iedpezfqcqsfx Ag Usic

Condition: used, Year of construction: 2009, 2009 OKUMA MILLAC 800 VH Palletised System 5 Axis Machining Centre With OSP P200M Control Automatic Pallet Changer (APC) 6-Station Automatic Pallet Pool, Including 4 Additional Pallets. Tool Magazine 120-Station ATC (Automatic Tool Changer). Linear Glass Scales On 'X, Y, Z' axes (In Addition To Standard Encoders). 'A'-Axis Rotary Scale: Circular Glass Scale On Tilting Head Spindle ('A'-Axis), 0.001° Resolution, Equipped With Tilting Brake Clamping. 'C'-Axis Rotary Scale: Circular Glass Scale On Rotary Table ('C'-Axis), 0.001° Resolution, Equipped With Continuous Brake Clamping. Maximum Spindle Speed 10,000rpm (18.5/22 kW Motor), 21 Nm Torque. Spindle Taper BT 50 BIG PLUS. Pallet Dimension 800 x 800mm. Maximum Pallet Load 1,000kg. Axis Travel 'X'=1,020mm, 'Y'=1,020mm, 'Z'=1,020mm. Rapid Traverse 'X'=30m/min, 'Y'==30m/min, 'Z'=30m/min, 'A'=3,600min-1, 'C'=3,600min-1. Cutting Feed 'X, Y, Z'=1-12,000mm/min, 'A, C'=1-2,400°/min. Spindle Nose To Pallet Top (Vertical) -100 To 920mm. Spindle Centre To Pallet Centre (Vertical) -50 To 970mm. Spindle Centre To Pallet Top (Horizontal) 150-1,170mm. Spindle Nose To Pallet Centre (Horizontal) -300 To 720mm. Maximum Tool Ø125mm (Ø200mm Without Adjacent Tool), Maximum Tool Length 400mm, Maximum Tool Weight 20kg. Tool Change Time (T-T) 4.5sec. Power Capacity 60kVA. S/No.143486 (2009/03). Isdpfjzfhudsx Ag Usic With Workpiece Probe: Spindle-Loadable Measuring Probe (From ATC) For Workpiece Zero-Setting & Inspection, Including Macro B Software Option On The CNC. Air Blow System: Spindle Annular Air Blow For Chip Removal & Cone/Flange Cleaning (BT 50 Big Plus). Tool Sensor: BLUM Laser System For Tool Length And Ø Control, Including Pneumatic System For Laser Lens Cleaning. Coolant Through Spindle (CTS): High-Pressure CTS System At 70 BAR (13/18 L/min / 6.9 MPa) With Inline Centrifugal Filter. Spindle Air/Fluid Output: Selectable Air Blow Or Coolant Through Spindle. Shower Coolant: Overhead Shower Wash System. Wash Gun: Coolant Wash-Down Gun Including Dedicated Pump. Chip Conveyor: Drum Filter Type Chip Conveyor With 700L Tank. Oil Skimmer: Installed On The Chip Conveyor. Work Coordinate System Expansion: Expanded To 400 Tool/Workpiece Origins. Tool Offset Expansion: Expanded To 500 Tool Length And Radius Offsets. 3D Tool Radius Compensation: Three-Dimensional Tool Radius Compensation Software. SUPER NURBS Kit: Included (Features: Tool Length Compensation, Vector Control, Lateral Tool Compensation). Data Transfer: DNC-DT Ethernet Software Interface. Programming Functions: Scaling (G50/G51 codes), Mirror Imaging, And Programmable Custom Message Input. Cycle Restart: Sequence Return / Block Restart From Any Interrupted Block. MOP (Machining Operation Monitor): Self-Learning Cutting Load Control/Tool Overload Monitoring. G93 Function: Inverse Time Feed Function. Thermal Compensation: Spindle Tilt Thermal Compensation Software. Overall Dimensions L4,760 x D6,300 x H3,600mm. Weight 22,000kg.

Condition: used, Year of construction: 2008, 3650 x 1560mm Matrix Table 4455mm x axis stroke [for routing] 1930mm y axis stroke [for routing] 250mm z axis stroke 150mm Max panel clearance X / Y Axes vectorial speeds 43m/min Z axis speed 15m/min Power 2000 Routing Unit 9 / 10hp for HSK63F toolholders. Speeds from 12000 to 18000rpm 250m3 / hr vacuum pump Telesolve long distance remote diagnostic system Fitted with following options Interpolating Z axis Centralised dust extraction system Pre-setting for angle driven heads TR10 Fixed 10 position toolchanger [ mounted on side of table ] R8 Rapid 8 position rotary toolchanger [ mounted on operating unit support beam ] 2 x Electronic detecting systems for panel height and tool length 3 x Additional rear stops Automatic centralised lubrication "PC Office" Console for easy movement around machine. Including Windows XP operating system 15" Colour monitor Keyboard CD Rom drive 40 Gbyte hard disk 128MB Ram Serial nr - AA2 / 000268? Year - 2008 CE Compliant Iiedpfjzd Utwox Ag Uoc Condition - Good

Condition: used, Year of construction: 2025, functionality: unexamined, Homag Centateq P110 PROFI BMG110/3115/F/K CNC machining centre (2025) with  Iisdpfx Aszc Rzpjg Uoc Almig Combi XP15 receiver mounted air compressor (2025) Air Plants Dust Extraction Ltd dust extraction system (2025)

Condition: good (used), Year of construction: 2015, 2015 Haas VF 3SS CNC Vertical Machining Centre Table Size 1,219mm x 457mm (5 'T' Slots 16mm Wide x 80mm Pitch). Table Load 794kg. Axis Travel 'X'=1,016mm, 'Y'=508mm, 'Z'=635mm. Distance From Spindle Nose To Table 742-107mm. Rapid Traverse 'X'=35.6m/min, 'Y'=35.6m/min, 'Z'=35.6m/min. Maximum Cutting Feed 21.2m/min. Maximum Spindle Speed 12,000rpm (22.4kW Motor). Spindle Taper BT40. 24 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 330mm, Maximum Tool Weight 5.4kg. S/No. 1119704 (2015). Iisdpfszc Ih Tjx Ag Uoc With Coolant Filtration System (208L Tank), Auger Screw Chip Conveyor, Renishaw OTS Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included.

Condition: excellent (used), Year of construction: 2020, 2020 Haas UMC-750 CNC 5 Axis Vertical Machining Centre Table Dimension Ø500mm (7 'T' Slots). Maximum Table Load 300kg. Axis Travel 'X'=762mm, 'Y'=508mm, 'Z'=508mm, 'B'=-35° To +120°, 'C'=360°. Distance From Spindle Nose To Table 610-102mm. Rapid Traverse 'X'=22.9m/min, 'Y'=22.9m/min, 'Z'=22.9m/min, 'B'=50°/sec, 'C'=50°/sec. Maximum Cutting Feed 16,5m/min. Maximum Spindle Speed 8,100rpm (22.4kW Motor). Spindle Taper BT40. 40 + 1 Position ATC. Maximum Tool Ø64mm (Ø127mm Non Adjacent Tool), Maximum Tool Length 305mm, Maximum Tool Weight 5.4kg. S/No. 1172799 (2020). Iedpfx Aozc Idheg Ujic With Coolant Filtration System (208L Tank), Hennig Chip Conveyor, Renishaw Tool Setter, Renishaw Spindle Probe, Signal Tower, Handwheel & Manuals. Note: Tooling & Work Holding Not Included.

Condition: excellent (used), Year of construction: 2022, Specification: Vertical Drill Block with 13 Spindles Horizontal drill block with 4 spindles in the X Horizontal drill block with 2 spindles in the Y Grooving Saw D=100mm Plausibility check 10kw tool change spindle 4 position tool changer Workpiece length max 200-3050mm Workpiece width 70-850mm Iisdpfx Agozdki Us Uoc Workpiece thickness 8-56mm Powertouch screen Woodwop for machine Energy Saving Mode

Condition: excellent (used), Year of construction: 2003, Ref:11066 . 2003 Autobond105 THS. B1, single sided, fully automatic thermal laminator. Excellent condition run less than 1.5 million sheets! Equipped with; Heidelberg deep pile suction feeder with back separation 250mm (10) diameter highly polished chrome laminating roller Laminating nip pressure up to 6 metric tonnes Film is mounted on a quick change air shaft Ijdpfjydnxnsx Ag Usic Trim slitter and perforating mechanism Pneumatic clutch ensures precise film tension Swiss made temperature control unit Sheeter - Integral bump roller separator with anti-curl bar Pallet delivery table. Accessories: Ioniser Pro static eliminator. Specification: Sheet size Max: 105 cm (40”) x 76 cm (30”) Min: A4 Paper weight 90 gsm (80lb) - 650 gsm (24 PT) Film Range - 8 micron virgin & 24 micron (1 mil) to 75 micron (3 mil) thermal Top speed 45m (150') per minute with rising pile feeder.

Condition: excellent (used), Year of construction: 2007, Ref: 10815 . 2007 Muller Martini 3215 Ventura High speed, fully automatic sewing machine Features: High range of product sizes Papers from 22 gsm Feeder and/or knife opening Innovative sewing system Patented loop formation with compressed air Quick change between different type of stitches Iiodjt Sybcspfx Ag Ujc Equipped with: Suction opening 4 + 4 for products with or without over fold Optical scanning system Additional parts for processing of thin printing Stacker delivery Max signature length: 510mm Max. speed: 12,000/hour

Condition: excellent (used), Year of construction: 1991, Ref:11067 . 1991 Wohlenberg 115 MCS-3 TV Guillotine. Last supplied fully overhauled 2011. Microcomputer programming with static back gauge - 1024 Data-blocks, 1-99 programmes with LED display. Semi or fully automatic cutting Side air tables L & R Central air table Cutting area illumination Variable pressure hydraulic clamp Iiedjydnw Depfx Ag Ujc 2 x HSS knives Safety knife change device - machine assisted Overload device with safety bolt FFM guarding to U.K. HSE specifications Including tools, spares & manuals. Accessories: 2000 Polar LW 1000-4 pile lift 2000 Polar RA4 jogger with air removing roller. Specification: Cutting width, Max: 115 cm Clamp opening, Max: 14.5 cm Depth of rear table, Max: 115 cm Cuts per minute, Max: 40 Clamp pressure : 2.5 - 40 kN Power requirement : 3 kW

Condition: excellent (used), Year of construction: 2017, Ref:11008 . 2017 Morgana AutoCreaser Pro 33 User friendly, single operator, standalone machine to crease digitally printed, heavy weight or cross-grained stock. Features: Morgana AutoCreaser Pro 33: Uses a unique creasing rule and matrix system to prevent cracking & tearing. 7" 'SmartScreen' touch screen controls all main functions. Automatically calculates where the creases need to be and sets them accordingly. Alpha-numeric memory allows an unlimited number of jobs to be stored. ‘PosiFeed’ feed system allows product to be piled higher and able to feed difficult stocks. Specification: Feeding System: Bottom suction feed Max. Sheet: 700mm x 330mm (27.5” x 12.6”) Min. Sheet Size (in automatic mode): 210mm x 140mm (8.5” x 5.5”) Max. Paper Thickness: 0.4mm (varies according to hardness, fold type & substrate) Max. No. Creases per Sheet: 16 Min. Distance Between Creases: 0.1mm Max. No. Stored Programmes: Unlimited Min. Crease Distance from Leading Edge: 2.5mm Min. Crease Distance from Tail Edge: 35mm In Hand Feed Mode up to 2499.9mm to Last Crease can be Programmed. Iijdpew U Ddbefx Ag Usc Speed per Hour (A4 in half): 8500 Speed per Hour (A5 in half): 11000

Condition: new, Year of construction: 2026, Ref:10804 . NEW 2026 Universal Z Card Line. Fully automatic line for making Z card fold-out maps, timetables and other promotional card leaflets etc. State of the art modular design and attachments that can be added as users requirements change. This unique line is capable of performing many different types of production with just one machine. Briefly Comprising:- LoCo friction feeder – bottom (option to go to 300 mm wide) LoCo friction feeder – inner text LoCo friction feeder – top Choice of PVA Cold glue or EVA Hot-melt gluing system – 4 heads with electronic control Counter/kicker Shingle delivery table Iijdpfx Agst Dpwdj Usc Including accessories & spare parts. (In-house compressed air supply required). Specification: Stock weight : 90 – 400 gsm2 Production speed : max.150/min. depending on stock. Power requirement : Single phase, 220V, 3kW

Condition: good (used), Year of construction: 2006, Ref:10979 . 2006 Heidelberg Stahl TH82/64-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. Iodpfewxw Snex Ag Usic • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SBP.D presser/stacker delivery unit. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit (to be confirmed). Folding sequence: 1st buckle unit - 82cm with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - 66cm with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - 56cm with 4 plates, perforating/scoring shafts Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm Fold length, Min: 6 cm Mechanical speed : 50 - 230 m/min Folding production : Max. Buckle 50,000 s.p.h. Option of: 2010 Palamides Alpha 500 Plus Presser/Stacker

Condition: excellent (used), Year of construction: 1997, Ref:10993 . 1997 Hoerauf BDM20 Case Maker. Suitable for various products such as book cases, ring binders, letter file cases, Isdpfxow Avmfs Ag Uoic 3-piece cases, game boards, padded cases for photo albums, pocket diaries, bible cases etc. Comprising; Conveyor infeed of board In-line board cutting attachment for 3-piece boards Triple reel feeder for soft spines with auto-splice Magazine feeder for stiff or hollow spines Shingle conveyor feed of pre-cut cloth Pre-melt tank Mobile hot-melt gluing unit and circulation pump Conveyor delivery with counter DC drive motor Complete with compressors, tools & manuals. Accessories: PVA cold glue tank for 2nd pass back lining capability. Specification: Open case size standard : Max. 380 x 680 mm Min. 130 x 190 mm Board thickness : Max. 4 mm, Min. 1 mm Spine width : Max. 80 mm, Min. 8 mm Spine thickness, flexible : Max 0.5 mm, Min 0.3 mm Rigid : Max. 3 mm, Min 1 mm Cover material : Max. 0.3 mm, Min 0.1 mm Production speed : Max. 60/min.

Condition: excellent (used), Year of construction: 2012, Ref:11095 . 2012 ‘Heidelberg’ Stahl TH82/442K-RFH High performance all buckle folding machine with computerised auto set-up of fold plates & rollers. Comprising; • RFH82 continuous loading round pile feeder with air stream table designed for high run lengths • With low operator strain, double wheel suction head for wide format sheets. • Digital microprocessor control with touch screen display for automatic setting of fold plates and Isdpfey Hixvox Ag Uoic roller pressures with learning function for signature length, suction & spacing with run monitoring, integrated total and batch counter with memory. • Touch-screen for fully automatic setting of fold plates and roller pressures. • Combination buckle plates with swing-away deflectors for quick change from stop to fold. • Setting adjustments can be made outside the machine ‘on the fly’. • Sound hoods covering all buckle units. • SAK-66 shingle belt delivery table. Including compressor, tools, spares & manuals. Accessories: Electronic gate-fold plate with control unit. VFZ mobile electronic ‘Z’ knife fold unit. Folding sequence: 1st buckle unit - with 4 plates, perforating/scoring shafts 2nd mobile buckle unit - with 4 plates, perforating/scoring shafts 3rd mobile buckle unit - with 2 plates, perforating/scoring shafts VFZ mobile electronic knife fold. Specification: Sheet size, Max: 82 x 128 cm (Continuous Feeder) Min: 14 x 18 cm.