Used Broaching for sale (203)

Condition: refurbished (used), functionality: fully functional, Year of construction: 2023, input voltage: 400 V, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, Manufacturer: Rausch (Haan/ Rhld) Model: RS 4/1000 Machine No.: 5027 Year of manufacture: 2001/2023 Weight: 580 kg Overhauled: 3/2023 by Wiemers AG General / Technical Data: Unused, overhauled mechanical vertical broaching machine Rausch RS 4, with current “CE” certification Pulling force: 40 kN (4,000 kg) Broaching speeds: 3 m/min and 6 m/min Return speed: 6 m/min Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table dimensions / Working area: 540 x 340 mm / 450 x 250 mm Table opening: Ø 90 mm for standard broaching mandrels Workpiece diameter: unlimited Dimensions (H x W x D): 2,350 mm x 900 mm x 1,000 mm (with splash-guard cabin) Motor: 4.4 kW / 5.5 kW Power supply: 400 Volt / 50 Hz Accessories / Special equipment: - Drive with 2 speeds - Safety door with interlock and chip chute - Chip chute with tool storage - Electric clamp jaw sensing (tool removal monitoring to prevent unintentional retraction of the drawbridge) - Integrated coolant system with solenoid valve (controlled via swing system) - Patented coolant/lubricant swiveling system - Externally adjustable tool length setting system (reproducible across multiple machines) - 4 central lubrication points for the trapezoidal spindle drive - Closed centering plate for profile tools with additional protection plate for flat broaching tools (keyway tools) - 3-sided enclosed splash guard cabin with tool storage (ideal for profile broaching) - External control panel (connected via Harting plug connector) Remarks: The machine has been completely overhauled, the machine body thoroughly reconditioned. The following wear parts have been replaced: - New trapezoidal spindles and spindle nuts made from cast, wear-resistant bronze - All bearings and seals replaced The coolant system (pump, check valve, and drain valve) including coolant/lubricant swing system is new - Coolant supply is controlled via a solenoid valve, which can be switched over by the swing system - The drawbridge as well as the clamping jaws and rack segments are new - A deactivatable clamping jaw detection system has been installed (additional safety for operator & to prevent tool breakage) - A safety door with interlock, signal display, and door lock - The tool length adjustment system has been relocated outside the machine compartment - Additional end-position limit switches have been installed - Complete new electrical system (control cabinet) - No PLC installed, machine is electrically maintenance-friendly - New drive motor (SEW Germany) with brake - The machine has been freshly painted with 2-component structural paint General The dual spindle drive ensures smooth, centralized pulling force and consistent broaching speed (broaching speed selectable: 3 m/min or 6 m/min). By design, the machine is quick and simple to set up for broaching with flat broaching tools for keyway cutting. Lrodpfow H Dgnjx Ac Aon Thanks to the universally constructed design of the drawbridge and machine table, operation with both profile and flat broaching tools is possible without the need for additional drawheads.

Year of construction: 1962, condition: good (used), machine/vehicle number: 1886, Used vertical hydraulic internal broaching machine with 3 broaching points Ledpfst Dwb Dsx Ac Asrn Tractive force: 10.000 kg clearing length: 1.200 mm Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Passage width between the cylinders: max. XXX mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 1,300 x 1,450 x 3,350 mm (without pit) Power supply / connected load: 380Volt 50 HZ / 8.0 KW Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Condition: used, functionality: fully functional, Year of construction: 1966, overall weight: 7,000 kg, input voltage: 380 V, broaching length: 1,500 mm, number of broaching positions: 3, workpiece diameter (max.): 575 mm, total height: 5,100 mm, Manufacturer: Karl Klink Model: RSI 20x1500 Year of manufacture: 1966 Weight: approx. 6,700kg Machine No.: 2455 Lrsdpfx Acewql Rvs Aon General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations Pulling force: 20,000 kg Broaching stroke: 1,500 mm Broaching stations: 3 units Distance between broaching stations: 2 x 145mm Mounting diameter of the draw heads: 3 x Ø 85mm Passage width between the columns: max. 580 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min up to max. 7 m/min Return speed: hydraulically steplessly adjustable from 7 up to max. 25 m/min Machine space requirement: (w x d x h) approx. 1,500 x 2,100 x 4,600 (h max. 5100 with raised tool feeder) Power supply / Connected load: 380Volt 50 HZ / 14kw Accessories / special features: The machine is equipped with a workpiece table with 3 holes for 3 broaching stations. The tool clamping system is designed for spring-mechanical locking in the drawbridge and in the feeder. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, for optimal use, ideally a foundation (pit) is required or optionally a platform. Draw heads and ejector needles are available on request. The machine can be inspected under power at our warehouse. General information: We constantly have a large selection of approx. 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock are ready for demonstration and can be inspected. If required, we can offer you used equipment such as draw heads, ejector needles, broaching tools and other specific accessories. We operate as a contract broaching company and can also assist you with technical questions based on 50 years of experience in broaching technology.

Condition: new, functionality: fully functional, Year of construction: 2025, overall weight: 480 kg, input voltage: 400 V, input frequency: 50 Hz, broaching length: 1,000 mm, number of broaching positions: 1, broaching speed: 3 m/min, reverse speed: 100 mm/s, workpiece diameter (max.): 800 mm, total height: 1,680 mm, Manufacturer: Wiemers AG Model: SR 30 /1000 Machine No.: WAG 3104 Year of manufacture: 2025 Weight: 480kg General / Technical Data: New vertical broaching machine by Wiemers SR 30 (100% compatible with Rausch RS 3) Tensile force: 30 kN (3,000kg) Broaching speeds: 3m/min & 6m/min Return speed: 6m/min Maximum stroke: 1000mm Maximum tool length: 1200mm Table size / Working area: 430mm x 320mm / 340mm x 220mm Table aperture: Ø 90mm for standard broaching arbors "System Rausch" Workpiece diameter: unlimited (removable coolant swivel system) Lrjdpfx Aew D E Twjc Aon Broaching capacity / keyway width: up to 20mm in steel (from 16mm broaching tool width only with stepped tool shank) Dimensions (h x w x d): 1370mm x 680mm x 750mm (h = table height from floor without attachments) Motor: 2.5kW/3.0kW, 2-stage for 2 working speeds Power supply: 400 Volt / 50 Hz Equipment: - Gear motor drive with 2 working speeds - Reinforced draw bridge made from tool steel for higher tensile forces - Safety door with door interlock, safety interrogation and safety monitoring - Easily removable chip chute with tool extraction protection and parking facility - Externally adjustable tool length setting system (reproducible across machines) - Protective covers for stroke adjustment and electrical switching units - Oil-tight tray on the control cabinet - Electrical sensing of clamping jaws (tool extraction monitoring prevents unintentional retraction of the draw bridge – extra safety for operator and tool) - Integrated coolant system with electrically switched solenoid valve and drain tap - Coolant swivel system with automatic coolant switching via the swivel system - Extra reinforced chip basket and chip screen with magnetic insert - Stainless steel control panel with permanent labelling - 4 central lubrication points for trapezoidal spindle drive with manual grease gun - Electrical preparation for external control element (16-pin connector) - Provision for automatic clamping jaw opening during profile broaching with roller lever - Machine documentation with “CE” declaration of conformity Optional extras: - Automatic clamping jaw opener for easier tool extraction during profile broaching - Open 3-sided splash guard cabin (w x d x h) 700 x 350 x 600mm - External electrical operating unit for broaching and return stroke, as well as emergency stop functionality Note: The machine is 100% compatible with Rausch broaching machines of the same performance class in the RS 3, RS 4, and RS 6 series available on the market. All fixtures, tools or arbors can be used 100% interchangeably. General information: The double spindle drive ensures a smooth and centered pulling force as well as a constant broaching speed. The machine is primarily designed for the production of keyways up to 20mm. (From 16mm keyway tool width only with stepped tool shanks) The design of the machine allows for fast and easy setup for broaching with flat broaching tools for keyways. Thanks to the universally constructed drawbridge and machine table, broaching with both profile and flat broaching tools is possible. Profile broaching can be performed without the use of additional pull heads, by using simple centering bushings. Suitable broaching tools and arbors for the machine are available on request.

Condition: used, Year of construction: 1986, overall weight: 6,500 kg, power: 42 kW (57.10 HP), input voltage: 380 V, broaching length: 1,600 mm, number of broaching positions: 1, workpiece diameter (max.): 500 mm, Manufacturer: Varinelli Milano Italy Model: BV 25 x 1600 x 500 Year of manufacture: 1986 Weight: 6,500kg Mach. No.: 3269 General / technical data: Vertical hydraulic internal broaching machine with one broaching station Pulling force: 25,000 kg Broaching stroke: 1,600mm Broaching stations: 1 piece! Lsdswqmaxspfx Ac Ajrn Passage width between the cylinders: max. 540mm Cutting speed: hydraulically stepless adjustable from 1 m/min up to max. 8 m/min Return speed: hydraulically stepless adjustable up to max. 18 m/min Required space for the machine: see image of machine layout plan Power supply / connection value: 380 Volts 50 Hz / 42 kW Accessories / special equipment: The machine is equipped with a workpiece table for 3 broaching stations. The tool clamping system is equipped with a spring-mechanical locking (DIN 1417) in the pulling bridge. The tool feeder system is hydraulically-mechanically locked. The machine has a coolant system with integrated chip conveyor for installation in a pit. Remarks: The machine is still in its original paint. It is designed for use in mass production for medium and large batches; for optimal use, a foundation (pit) is ideally required. Pulling heads and needle pushers are available on request. The machine can be inspected at our warehouse. General information We constantly have a large selection of about 80 used broaching machines with pulling forces from 3,000 kg to 63,000 kg in horizontal as well as vertical design in stock. A large part of the broaching machines in stock is ready for demonstration and inspection. If required, we can offer you used equipment such as pulling heads, needle pushers, broaching tools, and other specific accessories. We are also a contract broaching company and can assist you with technical questions from 50 years of experience in broaching technology.

Condition: refurbished (used), functionality: fully functional, Year of construction: 2025, overall weight: 400 kg, input voltage: 400 V, broaching length: 1,000 mm, Manufacturer: Rausch Model: RS3 /1000 Machine No.: 3714/1070 Year of Manufacture: 1995 Weight: 400 kg Overhaul Due: 04/2025 by Wiemers AG General / Technical Data: Unused, fully overhauled mechanical vertical broaching machine Rausch RS 3, with CE marking Pulling force: 3,000 kg Broaching speeds: 3 m/min & 6 m/min Return speed: 6 m/min Lrsdjw Huh Njpfx Ac Ajn Maximum stroke: 1,000 mm Maximum tool length: 1,200 mm Table size / workspace: 430 mm x 320 mm / 340 mm x 220 mm Table opening: Ø 90 mm for standard keyway broaches "Rausch system" Workpiece diameter: unlimited (removable coolant swiveling system) Broaching capacity / slot width: up to 18 mm in steel (from 16 mm slot width only with stepped tool shank) Dimensions (H x W x D): 2,250 mm x 800 mm x 750 mm (H = including 3-sided safety enclosure) Motor: 2.5 kW / 3.0 kW Power supply: 400 Volt / 50 Hz Features: - Gear motor drive with 2 working speeds - Safety door with interlock system (emergency stop circuit) - Easily removable chip chute with tool rest - Externally adjustable tool length setting system (Rausch system) - Protective covers for stroke adjustment and electrical switch gear - Electrical sensing of clamping jaws (tool removal check prevents unintentional return of the pull bridge, adding extra safety for operator and tool) - Integrated coolant system - Coolant swiveling system (without electrical switching function) - Three-sided splash guard enclosure with wide front opening for working area - Extra reinforced chip basket and chip screen with magnet feature - Stainless steel operator panel with permanent labeling - 4 central lubrication points for leadscrew drive with manual grease gun - New machine documentation - CE marking by manufacturer (1995) Remarks: The machine is overhauled and the machine body has been fully refurbished. The following wear parts were replaced or renewed: - New trapezoidal screws and nuts made of cast wear-resistant bronze - All bearings and seals replaced - The entire coolant system incl. coolant/lubricant swiveling system is new - New two-speed SEW gear motor - New electrical system (Siemens) - New safety door replacing the old light barrier - New clamping jaws - All sheet metal parts such as covers, chip chute, basket, screen, and spindle guard are new - Stainless steel operator panel with permanent labeling - Machine has been newly painted with 2-component structural lacquer This machine carries the manufacturer’s CE marking. General Information: The twin-spindle drive ensures quiet, centrally aligned pull and constant broaching speed. The machine is primarily designed to cut keyways up to 18 mm wide (from 16 mm tool width only with stepped tool shanks). The design allows for quick and easy setup for broaching with flat broaches for keyway slots. Thanks to the universally designed pull bridge and machine table, broaching with both profile and flat broaches is possible without requiring additional pull heads.

Condition: good (used), functionality: fully functional, Year of construction: 1992, Vertical broaching machine with numerous holders Lredpfx Acsy Nka To Aen

Year of construction: 1972, condition: used, Max. pulling force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 25 m/min Number of die positions: 3 Throat depth: 470 mm Ledpfx Ajcdtnhoc Aern Distance between die positions: 125 mm Table: 400 x 400 mm Special equipment: Chip removal via a permanent magnet chip conveyor 1 hydraulic unit, 1 work platform, electrically controlled hydraulic ram and end-piece holder, automatic feeding device

Year of construction: 1987, condition: used, machine/vehicle number: 34, Max. pulling force: 10 tons Max. stroke: 1000 mm Cutting speed: 7.5 m/min Return speed: 24 m/min Weight: 6.2 tons Ljdpfxjnd Dmj Ac Aorn The machine is suitable for cleaning tubes.

Year of construction: 1980, condition: used, Max. tensile force: 10 tons Max. stroke: 1250 mm Max. cutting speed: 10 m/min Max. return speed: 27 m/min Max. workpiece diameter: 320 mm Lredpfx Acecdtplo Ajn Number of units: 3 Weight: 4.8 tons Automatic tool feeder Hydraulic draw-in head and end piece holder locking system Automatic feeding device for workpiece diameters up to 100 mm Magnetic belt chip conveyor

Year of construction: 1960, condition: used, max. pulling force: 20,000 kg max. stroke: 1250 mm max. cutting speed: from 1 m/min to 7 m/min max. return speed: from 5 m/min to 25 m/min max. workpiece diameter: approx. 140 mm max. tool diameter: approx. 50 mm Number of tool stations: 2 The machine is equipped with a 2-station rotary indexing table. The machine is equipped with an automatic tool feeder and is designed for manual series production. The tool locking mechanism in the drawbar and in the tool feeder is spring-loaded (pull head according to DIN 1417). Lodpoui Sbsfx Ac Aern

Year of construction: 1959, condition: used, max. tensile force: 16 tons max. stroke: 1250 mm cutting speed: 5.6 m/min Lodpo Rwa Uofx Ac Aorn return speed: 30 m/min

Year of construction: 1956, condition: used, machine/vehicle number: 1413, Manufacturer: Karl Klink Model: RISZ 10x 1200 Year of manufacture: 1956 Weight: 3450 KG Machine No.: 1413 General / technical data: Used vertical hydraulic internal machining machine with up to 3 machining stations, in ready-to-use condition. Pulling force: 13000 KG (maximum) Machining length: 1200 mm Machining stations: 3 Distance between machining stations: 100 mm Mounting diameter for the draw head: Ø 85 mm Passage width between the cylinders: max. 390 mm Cutting speed: hydraulically continuously adjustable from 1 m/min to max. 7 m/min Return speed: hydraulically continuously adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1150 x 1500 x 3725 mm (tool delivery system extended) Power supply / rated power: 380 V 50 Hz / 7.5 kW Accessories / special equipment: The machine's draw bridge has 3 tool holders for machining tools, and the workpiece table has 1 machining station (can be modified). The tool clamping system and the tool delivery system are designed for a spring-mechanical locking system (DIN 1415). The machine has an automatic tool delivery system, and the existing mount for the tool delivery system is also designed for only 1 tool (middle machining station). The machine has an integrated coolant system for cutting oil. Remarks: Lrodpfedbmgmsx Ac Ajn The machine is in good condition for its age and is ready for immediate use. It is designed for manually operated production use with medium batch sizes. The machine has an automatic cycle. For use, a machine pit or, alternatively, a platform is ideally required. Draw heads, tool holders, and tools are available upon request. The machine can be inspected in our warehouse while powered up.

Year of construction: 1951, condition: good (used), machine/vehicle number: 1133, horizontal hydraulic broaching machine Karl Klink (our Ref No. WKG 1678) machine type: horizontal internal hydraulic broaching machine Lsdpfjdcdrpjx Ac Aern manufacturer: Karl Klink type: RW 10 built in: 1951 stroke 1500mm pulling force: 10.000KG working stations: 1PCs drive: hydraulic system equipment: coolant system Optional accessories available on request: Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3.000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1980, condition: good (used), machine/vehicle number: 03.2123, Manufacturer: Arthur Klink Model: RISZ 25x 2500 x 500 Year of manufacture: 1980 Machine no.: 03.2123 General / technical data: Used vertical hydraulic internal broaching machine with 3 broaching stations in very good condition. Pulling force: 25000 KG Broaching length: 2000 mm Number of broaching stations: 3 Distance between broaching stations: 160 mm Mounting diameter for broach holders: 3 x Ø 100 mm Clearance width between cylinders: Nominal size 500 mm Measured clearance width between cylinders: max. 590 mm Cutting speed: Hydraulically continuously adjustable from 1 m/min to max. 10 m/min Return speed: Hydraulically continuously adjustable from 5 to max. 25 m/min Machine footprint: (w x d x h) approx. 3400 mm x 3400 mm x 6900 mm (without pit) Power supply / connection value: 380 volts 50 Hz / 22 kW Accessories / special equipment: The machine is currently without a workpiece table. A workpiece sliding table was mounted on the machine, with a special workpiece clamping device for external broaching. (Workpiece sliding table can be modified). The tool clamping system is equipped with a hydraulic locking mechanism in the pull bridge and in the feed mechanism. The machine has a coolant system with an integrated chip conveyor. Ljdpjdffzfjfx Ac Ajrn Remarks: The machine is in very good condition and still has its original paint. It is designed for use in series production, and for optimal use, a foundation (pit) is ideally required. Broach holders and pin ejectors are available upon request. The machine can be inspected at our warehouse.

Year of construction: 1958, condition: used, machine/vehicle number: 1545, Manufacturer: Karl Klink Model: RIS 6 x 1000 Year of manufacture: 1958 Weight: 2500 KG General / technical data: Used vertical hydraulic internal cutting machine with 1 cutting station, in operational condition Pulling force: 6000 KG Cutting length: 1000mm Mounting diameter of the draw head: Ø 85 mm Passage width between the cylinders: max. 280 mm Cutting speed: hydraulically steplessly adjustable from 1 m/min to max. 7 m/min Lredpfx Acjda Ugie Ajn Return speed: hydraulically steplessly adjustable from 7 m/min to max. 25 m/min Machine footprint: (w x d x h) approx. 1000 x 1200 x 2800mm Power supply / connection value: 380Volt 50 Hz / 4KW Accessories / special equipment: The machine is equipped with a workpiece table for 1 cutting station. The tool clamping system is designed for a spring-mechanical locking mechanism (DIN 1415). The machine has an integrated coolant system. A double draw head for 2 flat cutting tools with a workpiece support plate is available. Remarks: The machine is in good condition for its age and is ready for immediate use. It is designed for manual operation in production with medium batch sizes. Ideally, a machine pit or, alternatively, a platform is required for operation. Draw heads are available upon request. The machine does not have a tool feed system. The machine can be inspected in our warehouse while it is powered.

Year of construction: 1982, condition: good (used), machine/vehicle number: 3120, Varinelli - internal broaching machine 25.000 kg (our Ref. No. WAG 729) machine type: internal horizontal hydraulic broaching machine manufacturer: Varinelli type: BV 25 x 2000 x 630 built in: 1982 stroke: 2000mm pulling force: 25.000KG working stations: 3 PCs drive: hydraulic system equipment: coolant system, chip conveyer Lrsdpfx Aced I R Ngj Aen remark: machine in stock, moving workpiece table Optional accessories available on request: tools, workpiece holder Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke

Year of construction: 1960, condition: refurbished (used), machine/vehicle number: 1733, Vertical internal broaching machine with switching plate of the company Karl Klink Type: RSI10DT Machine No.: 1733 Year of manufacture: 1960 Lsdpsgyd S Sefx Ac Asrn weight: 4,9 to broaching force: 10.000kg With switch plate ( 2 stations ) Power supply: 380V / 50Hz Rated current: 35 A Connected load: 7,5 kW The machine is completely revised and is therefore in a very good condition.

Year of construction: 1994, condition: excellent (used), machine/vehicle number: 04.2398, Manufacturer: Arthur Klink Type: RIW 10 x 1500 x 500 Machine No.: 04.2398 Year of construction: overhauled by manufacturer 1994 weight: 3700kg Lredpfjgyd T Ejx Ac Asn tractive force: 10.000kg (100kN) max. stroke: 1500mm max. workpiece diameter: Ø 500mm clearing speed: infinitely variable from 1m/min to 6m/min return speed: stepless adjustable up to 20m/min power supply: 400V / 50Hz

Year of construction: 1971, condition: used, General / technical data: Lredpfx Aslwu Spec Ajn Manufacturer: Forst Model: RSIA-20-1320 Year of manufacture: 1971 Weight: 6.000kg Tractive force: 20t clearing speed: 5m/min return speed: 16m/min maximum stroke: 1320 broaching positions: 3 clamping area: 370 x 620 x 105mm Remark: The machine is under power in our warehouse and can be inspected.

Year of construction: 1964, condition: good (used), functionality: fully functional, machine/vehicle number: 2016, Used vertical hydraulic internal broaching machine with 3 broaching points Tractive force: 16,000 kg clearing length: 1.250 mm Ljdpfx Aet Dv I Asc Aern Broaching points: 3 pieces Distance between the broaching points: 380 mm Mounting diameter of the broaching heads 3 x Ø ___mm Cutting speed: hydraulically infinitely variable from 1 m/min to max. 7 m/min Return speed: hydraulically infinitely variable from 7 to max. 25 m/min Space requirement of the machine: (w x d x h) approx. 2,200 x 1,550 x 4,200 (without pit) Power supply / connected load: 380Volt 50 HZ Accessories / special equipment: The machine is equipped with a workpiece table with 3 holes for 3 broaching positions. The tool clamping system is provided for spring-mechanical locking in the drawbridge and hydraulically mechanical in the feeder. The machine has been electrically (PLC Siemens S7) and mechanically modernized in 2004. The machine has an integrated coolant system. Remarks: The machine is designed for use in series production, ideally a foundation (pit) or optionally a platform is required for optimum use. Drawing heads and needle lifters are available on request. The machine can be viewed in our warehouse.

Year of construction: 1993, condition: refurbished (used), machine/vehicle number: 3694/895, machine type: vertical internal broaching machine manufacturer: Rausch type: RS 3/1000 built in: 1993 totally rebuild in: 5/2021 by WiemersAG weight: 400kg pulling force: 3.000kg (30kN) broaching speed: 3m/min & 6m/min return speed: 6m/min maximum stroke: 1000mm maximum tool length: 1200mm table size /work surface: 430mm x 320mm (340mm x 220mm) working stations: 1 pcs drive: mechanic drive system Lsdpfegw Hvnex Ac Aern engine: 2,5kW/ 3kW power supply: 400Volt/ 50Hz equipment: coolant system remark: machine under power in stock optional accessories available on request: tools, workpiece holder More detailed technical informations in the datasheet (german) in the annex. Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pieces of used broaching machines in our stock, vertical and horizontal machines from 3000kg up to 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke.

Year of construction: 1971, condition: used, General / technical data: Manufacturer: Varinelli Model: BVE-S-25-2000 Year of manufacture: 1971 Ledpfx Aolwvm Ajc Aorn Weight: 12to tractive force: 25to maximum stroke: 2000mm clamping surface: 500 x 500 table opening: 550mm power supply: 380 Volt / 50 Hz Accessories/ special equipment: - tilting table Remark: The machine is under power in our warehouse and can be inspected.

Condition: used, functionality: fully functional, Manufacturer: Arthur Klink Year of construction: ca.1960 Type: horizontal broaching machine Model: RH 10-50 Machine. No.: 241 Weight: 3.700 KG General / technical data: used horizontal hydraulic internal broaching machine in a good condition according to age with manual tool feeder in heavy design Clearing stroke: 1,500 mm Tractive force: 10,000 kg (100KN) Mounting in the drawbridge: Ø 85mm Cylindrical Through-hole in the clamping table: Ø 100mm Workpiece clamping surface: Ø 460mm Workpiece diameter: max. approx. 750mm (due to the tool trough of the tool feeder) Cutting speed: hydraulically infinitely variable from 1.0 m/min to 7 m/min Return speed: hydraulically infinitely variable from 5 m/min to 30 m/min Space requirement of the machine: (w x d x h) approx. 6500mm x 950 mm x 1,400 mm (without working area) Power supply: 380Volt 50 HZ Connected load: 8kw Equipment: - the machine has a mechanical hydraulic control for the clearing & return stroke - the machine has an integrated coolant system - the machine has a manually operated tool feed system - The broaching carriage with the pulling head holder is guided flat on both sides. - The machine has an adjustable tractive force limiter Accessories - 1 universal pulling head for flat shafts from 3mm to max. 25mm wide - Adapter sleeve for drawbridge from Ø 85mm to Ø 63mm Remarks: The machine can be used for the production of keyways with flat broaching tools, as well as for profile broaching. In combination with the machine bed of the machine and the stable broaching tool feeder, the machine is well suited for heavy profile broaching tools. The machine is used and is in very good condition for its age. The machine is in our warehouse and can be inspected under power. The machine is currently not technically and visually refurbished, but can be used immediately. Pulling heads for profile broaching are mostly available used on request depending on DIN standard, dimensions and stock. Lrsdpfxsr A Hdgs Ac Aon Direct contact details and further information can be found in the attached PDF document

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 3273, Neff - internal broaching press machine type: vertical hydraulic broaching press manufacturer: Neff Germany Lrsdpfx Acod N Rl Ne Aen type: 16 SRKA built in: 1977 stroke: 1300 pulling force: 16.000KG working stations: 1 PCs drive: hydraulic system equipment: coolant system remark: machine under power in stock Information about us: we are specialized for second hand broaching machine and still have anytime about 80 pcs of used broaching machines in our stock, vertical and horizontal machines from 3000kg up 63.000kg pulling force and from 1000mm stroke up to 3500mm stroke