Used Surface Treatment for sale (7,529)

Year of construction: 2008, condition: used, functionality: fully functional, Function : Stage 1 is a heated degreasing and phosphating stage. The stage has an external heat exchanger. Water, to compensate for evaporation and adhesion losses, is supplied from stage 2 through a separate circulation pump. An electronic level controller maintains a constant level of the liquid. Pump types 2 x W80 - 11 kW Total pump capacity 4.300 l/min – 18 MVS/ 22 kW Circulation pump 1 x W35 – 2,2 kW Total pump capacity 380 l/min – 10MVS/ 1,96 kW Heat exchanger gas max. 250 kW Spray pressure 1 – 1,5 bar Stage 2 is an unheated rinsing stage with water supply from stage 3. The water is supplied through a separate circulation pump. The stage has overflow to the drain. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 3 is an unheated fine rinsing stage with demineralised water from the reverse osmosis plant. The demineralised water is supplied direct from the osmosis plant. An electronic level controller maintains a constant level of the liquid. Pump type W80 – 11 kW Total pump capacity 2.150 l/min – 18 MVS/ 11 kW Spray pressure 1 – 1,5 bar Stage 4 is a final fine osmosis rinse direct from the osmosis plant. Nedpfezpxwdjx Afwsda The plant has cascade rinse technique with automatic level supervision for reducing the wastewater to a minimum. Maintenance and service friendly construction, all electrical elements are accessible from outside.

Condition: reconditioned (used), Year of construction: 1990, operating hours: 10 h, functionality: fully functional, machine/vehicle number: S3370, type of input current: three-phase, CM M1500 Shot Blasting Machine CM S 3370 Nodpsxqzmkefx Afwoda Maximum product dimensions: - Maximum product height: 1500 mm (measured under the hook) - Maximum diameter: Ø 1200 mm - Maximum weight: 700 kg - Equipped with 2x load-bearing hooks - 3x Turbine Ø 330 mm, 6-blade configuration - 3x Turbine: 1450 / 950 RPM – 5.7 kW / 4.1 kW Dahlander motors - Hook movement manual - Automated hook feed into the machine - Automated door operation - Fully overhauled CM shot blasting installation Mechanical and electrical systems have been completely refurbished to specification: Mechanical: - Motors & drives completely disassembled, fitted with new bearings and new seals - Blast cabin fully overhauled (sheet metal and doors), cabin prepared for manganese steel armor plates (hook brackets provided); cabin comes standard with original rubber lining, manganese steel armor as an optional extra - All augers replaced and fitted with HARDOX auger flights - All auger bearings replaced - Abrasive media elevator fitted with new elevator belt, return wheels & bearings - All chain drives & sprockets replaced - Hook feed system to machine modernized - Hook drive system completely overhauled - Compressed air supply replaced - Pneumatic cylinders & valves renewed/overhauled - 3x turbines fitted with new wear parts and new turbine wheels Ø 330 mm Electrical: - Machine fitted with 3x Turbine Ø 330 mm with dual-speed control (2-speed motors) - Siemens electric motors preventively rewound & tested, fitted with new bearings - Electrical control system completely replaced by SIEMENS S7-1200 PLC & control panel - Electrical control panel completely renewed with new relays, fully compliant with 2023 standards - Fitted with 3x SKF servo-controlled abrasive dosing systems. Abrasive supply is infinitely adjustable via the control panel for effortless switching within the two-speed blasting process - Equipped with Pilz safety equipment for turbines and moving parts, including emergency stop circuits The machine is fully operational and available for immediate sale. The machine can be fully tested at our facility in Soerendonk (test runs without abrasive media). 1-year warranty on the machine (excluding wear parts) when sold within the Netherlands.

Condition: like new (used), Year of construction: 2021, functionality: fully functional, total height: 3,000 mm, total length: 8,880 mm, total width: 4,000 mm, volume flow: 38,000 m³/h, type of input current: three-phase, workpiece weight (max.): 80 kg, compressed air connection: 8 bar, suction capacity: 38,000 m³/h, load capacity: 80 kg, heating capacity: 340 kW (462.27 HP), Equipment: cabin, lighting, For sale is a brand new wet painting line. Internal dimensions of the cabin 8880x4000x3000mm. Overhead conveyor of products with a length of 41m. Pitch of swivel hinges 400mm. Load capacity 80kg/m. Production speed maximum 4m/min. Large door to the cabin 2000x2500mm (possibility of painting large parts). Ventilation exhaust unit 38,000m3/min. Paint preparation room including membrane pump 01D140. Application electrostatic gun. Gas heating 340kW. Ndodpfx Ajwmm U Uefwoa

Year of construction: 2023, condition: excellent (used), 2023 Vixen Surface Treatments 2 Stage FL250 Industrial Parts Washer Front Pneumatic Vertical Loading Door Dimension W2,690 x H1,910mm. Voltage 400V. S/No. 3177 (2023). Please note a loading charge of £50 + VAT to be added to buyer's invoice. Nedpfezt R E Uex Afwsda With Extractor Fan, Pumps, Filtration, Signal Tower, Loading Trolley, Staging & Wash Gun. Overall Dimensions W3,300 x D4,440 x H2,800mm.

Year of construction: 2005, condition: ready for operation (used), functionality: fully functional, Equipment: CE marking, Cleaning system that is the ideal solution for cleaning a wide range of parts with complex shapes; 2 units available. Nsdpfxsy D Rh Ho Afwsda

Condition: excellent (used), Year of construction: 2019, functionality: fully functional, OKAMOTO ACC-16*24SA1 Precision Surface Grinding Machine Okamoto Precision Surface Grinding Machine ----- Model ACC-16•24SA1 Automatic Wheelhead Approach, Retraction to Start Position, Automatic Dress Cycle with Wheel Wear Compensation, Shift Plunge Cycle--- ----- Grinding Capacity 16”x 24” Standard Accessories • Automatic Overhead Wheel Dresser • Touch Screen Controller with 10” Display With Compensation, including Diamond Tool • Vertical & Crossfeed Pulse Generator • Rapid Wheel head Retraction • Teach-Input Positioning • Load Meter for Grinding Wheel Motor • 5 HP Wheel Spindle Motor • Shift-Plunge Rough Grinding Cycle • Stainless Steel Wheel Guard Nodpfx Afezmhknswjda • Selectable Rough/Fine Infeed Grinding Method • Leveling Bolts with Plates • Table Park for Safety • Necessary Tools & Tool Box • Stainless Steel Splash Guard • Installation and Training • Instruction Manual

Year of construction: 2016, condition: used, functionality: fully functional, We offer this used PLANOLITH granite surface plate PLANOLITH granite surface plate, year of construction 2016. Order number: 221881-1 Weight: 855 kg Accuracy grade: DIN 876/1 Permissible deviation: 0.025 mm Actual deviation: 0.00576 mm Checked on: 2016-11-09 If you have any questions or need more information, feel free to send us a message or give us a call. Ndodszgw D Ropfx Afwsa

Condition: new, BRAND NEW HYDRAULIC SURFACE GRINDING MACHINE WITH INDUCTION MAIN MOTOR Njdszupq Ejpfx Afwjda "Your Next Reliable Production Machine Starts Here"

Condition: new, Surface Shields SC300XL 200 pcs Shoe Covers. Please check out our other listings as well. Nedpfovxvlzex Afwjda

Condition: used, Year of construction: 2018, functionality: fully functional, operating hours: 5,000 h, Continous Cast link belt Hardening & tempring furnace with online pre wash & post wash SCADA control fully automatic Nsdpezbiqgsfx Afweda

Condition: ready for operation (used), functionality: fully functional, grinding wheel diameter: 355 mm, spindle speed (max.): 1,500 rpm, travel distance X-axis: 750 mm, travel distance Z-axis: 340 mm, controller manufacturer: Fanuc, TECHNICAL DETAILS Travel range, X-axis: 750 mm Travel range, Z-axis: 340 mm Table width: 600 mm Table depth: 300 mm Magnet width: 600 mm Magnet depth: 300 mm Max. grinding wheel diameter: 355 mm Max. spindle speed: 1,500 rpm MACHINE DETAILS Nodpfxezuw Dme Afweda Drive system: CNC Control system: Fanuc DIMENSIONS & WEIGHT Dimensions (L x W x H): 3,500 x 2,300 x 2,400 mm Net weight: 2,500 kg Shipping packages: 3 units EQUIPMENT CE marking

Condition: used, Year of construction: 2001, functionality: fully functional, OKAMOTO ACC 64 DX Surface Grinding Machine Year: 2001 Servo Automatic Downfeed Electromagnetic chuck Nsdpjzv Ef Usfx Afwsda Coolant filtraion system

Condition: used, JONES SHIPMAN 1307 EIT CYLINDRICAL GRINDING MACHINE MAKE JONES AND SHIPMAN, MADE IN ENGLAND MODEL 1307 EIT CENTRE HEIGHT 185.0 mm MAX DIAMETER 370.0 mm MAX GRINDING LENGTH 1016.0 mm MAX GRINDING WHEEL 350.0 mm x 40.0 mm GRINDING SPEED 40 – 320 RPM TABLE ROTATION 16 DEGREE TO – 12 DEGREE MAX INTENAL SPINDLE SPEED 24,000 RPM PLUS VARIABLE SPEED WORK HEAD INTERNAL SPINDLE. DOUBLE SWIVEL WHEEL HEAD. METRIC DIALS RANGE OF MAGNETIC CHUCKS PENDANT CONTROL HYDRAULIC PACK Ndsdpfey Hi Epox Afwsa PAPER FILTRATION SYSTEM REBUILT BY ANDMAR EXTENSIVE RAGE OF TOOLING AND ACCESSORIES HYDRAULIC PACK

Condition: excellent (used), PERFECT PFG-70150AHRD Surface Grinding Machine Year 2014 Table size 700 x 1500 mm Maximum longitudinal travel 1650 mm Maximum cross travel 760 mm Ndjdpfxszuxt Ao Afwsa Maximum distance table surface to spindle centre 600 mm Table speed 5 – 25 m/min Magnetic chuck size 700 x 1500 mm Spindle speed 1450 rpm Spindle motor 7.5 kW (10 HP) Grinding wheel size 355 x 40 x 127 mm Floor space required 4810 x 2550 mm Weight 7800 kg Supplied with: Automatic Downfeed System, 1500 x 700 mm Electromagnetic Chuck, Demagnetising Unit, 2 Axis Digital Readout, Remote Handwheel, Spindle Motor Speed Inverter Control, Automatic Paper Strip Filter & Magnetic Separator, Machine Pads & Levelling Bolts, Low Voltage Work Light. For sale with Jet Machinery Ltd Jet Machinery Stock No: #27039 Machine Serial Number: 1485022 Cost: £49,950.00 + VAT Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: used, Year of construction: 2003, CNC External Cylindrical Grinding Machine: total connected load 67 kW, voltage 3x400V 50Hz, nominal current 121A, weight approx. 9500 kg Data Kelvin Chiller (Model KRA45): serial number 0304666, year 2003, cooling capacity 4500W Data Ndodpszwf Uxsfx Afwea Ritz Coolant Pump (Type F2506): serial number 3196140, manufactured in 1994, 2.9kW

Condition: used, Year of construction: 2003, Surface and Profile Grinding Machine Nedpfx Ajzwfzlsfwoda table clamping surface approx. 600 x 250 mm grindable workpiece area (including 25 mm wheel width) approx. 600 x 300 mm max. permissible table load including magnetic plate approx. 130 kg height above floor approx. 1085 mm main spindle drive speed range 800-4200 rpm drive power 10 kW cutting speed 35 m/s grinding wheel diameter 300 mm, width 25/30 mm, bore 76.2 mm X-axis pendulum grinding travel speed (hydraulic, infinitely variable) 1000-24000 mm/min X-axis creep-feed grinding travel speed (AC servo motor) 5-1000 mm/min usable pendulum stroke 630 mm machine weight approx. 3400 kg, total weight approx. 3800 kg electrical supply 400V, 3-phase, 50Hz, rated current 30A, connected load 16kVA, supply fuses 35A

Condition: used, Year of construction: 2004, CNC Surface Grinding Machine CNC control Siemens Sinumerik with handwheel, GRIPS 32 control software spindle drive motor type MS501/5 machine weight approx. 2300 kg, total weight approx. 3500 kg electrical supply 400V, 3-phase, 50Hz, rated current 29A, connected load 20kVA, supply fuses 50A Table clamping surface (standard): approx. 500 x 250 mm, other sizes available upon request Grindable workpiece area incl. 25 mm wheel width: approx. 600 x 300 mm Grindable workpiece area with VJCE cover incl. 25 mm wheel width: approx. 600 x 290 mm Distance from table top to upper limit switch (Y) at 250 mm wheel diameter: approx. 366 mm Max. permissible table load incl. magnetic plate: approx. 130 kg Height above floor: approx. 1085 mm Main spindle drive speed range: 800-4200 rpm, other options available upon request Main drive power: 10 kW at max. rpm, option 5 kW at max. rpm Cutting speed: 35 m/s, other options available upon request Grinding wheel diameter: 300 mm, option 250 mm Grinding wheel width: 25/30 mm, option 50 mm Grinding wheel bore: 76.2 mm, option 50.8/51 mm available upon request Radial wheel wear allowance: approx. 45 mm X-axis pendulum grinding speed (hydraulic, infinitely variable): 1000-24000 mm/min X-axis creep-feed grinding speed (AC servo motor): 5-1000 mm/min X-axis travel between limit switches: approx. 660 mm X-axis usable pendulum stroke: approx. 630 mm Y-axis travel speed: 0.1-2000 mm/min Y-axis travel between limit switches: approx. 360 mm Y-axis measuring system resolution: 0.0002 mm Z-axis travel speed: 0.1-2000 mm/min Z-axis travel between limit switches: approx. 280/275 mm Z-axis travel between limit switches with JC/JCE cover: approx. 270/265 mm Z-axis measuring system resolution: 0.0002 mm Installation length: approx. 3400 mm Installation width: approx. 2700 mm Installation depth (without control pendant): approx. 2440 mm Ndjdpfx Aozwfmhefwoa Machine weight without full enclosure and control cabinet: approx. 3000 kg Machine weight with full enclosure and control cabinet: approx. 3700 kg Supply voltage: 400V AC -5% to +10%, 50 Hz, option 60 Hz Control voltage: 230V AC / 24V DC Connected load at 5 kW / 10 kW grinding power: 13.5 / 20 kVA Fuse protection: 35 A Data Cooling Unit (Erba/Schüler): equipment no. 85056334 Data Cooling Unit (Hyfra Pedia TRK 20-EF): equipment no. 85056333, year 2004 Data Filter Unit (Airtech MFE 20-SP): serial no. 393196, year 06/2004, rated voltage 230/400V, rated current 3.0A

Condition: good (used), Year of construction: 2003, Item: LC-1177-AlfaLaval-Conterm ALFA LAVAL CONTHERM 6X11 SCRAPED SURFACE HEAT EXCHANGER 13 x ALFA LAVAL CONTHERM SCRAPED SURFACE HEAT EXCHANGERS Manufacturer: Alfa Laval Type: Contherm Scraped Surface Heat Exchangers Quantity available: 13 units Condition: Used Location: Denmark We offer a total of 13 Alfa Laval Contherm scraped surface heat exchangers, available for sale individually, in smaller quantities, or as a complete package. Available Units 5 pcs. Alfa Laval Contherm 6X11 Model: 6X11 Year: 2003 Quantity: 5 units 8 pcs. Alfa Laval Contherm 6X9 Model: 6X9 Year: 1999 Quantity: 8 units Description Alfa Laval Contherm is a scraped surface heat exchanger designed for the continuous heating and cooling of products that can be difficult to process in conventional plate or tubular heat exchangers. Nodezvp Imopfx Afwjda The rotating scraper system continuously removes product from the heat transfer surface, helping to maintain efficient heat transfer and reduce product build-up. These units are particularly suitable for processing viscous, sticky, crystallizing, and heat-sensitive products. Typical Applications Dairy products Butter and margarine Cheese products Ice cream Sauces and dressings Fruit preparations Chocolate and confectionery products Viscous food products Crystallizing products Heat-sensitive products Other food and process industry applications Availability Total quantity: 13 units 5 × Contherm 6X11 – Year 2003 8 × Contherm 6X9 – Year 1999 The units can be purchased individually or as a complete lot of 13 units. Condition: Used Location: Denmark Delivery: EXW Denmark Availability: Immediately available Please contact us for price, additional technical information, dimensions, and photographs. A special package price is available for the purchase of all 13 units.

Condition: used, Jones & Shipman 540 Surface Grinder (6" x 18"), 460 x 150mm Magnetic Chuck, Power Rise & Fall Wheel Head. S/No. 1682/78 Location: These lots are located in Burton-on-Trent, UK. Unfortunately, there are no loading facilities on-site, dismantling and loading will be at the cost of the purchaser. Njdpfezr I Dlsx Afwoda

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, Machining diameter: 3,000 mm Machining height: 500 mm Nsdpjzvxhvofx Afwsda Z-axis travel, left support: 551 mm Z-axis travel, right support: 350 mm W-axis travel: 1,100 mm Rotation speed, left/right: 2,000 min-1 Max. table load: 6,000 kg 2x grinding supports – swiveling 2x diamond dressing tools Magnetic clamping plate by SAV Control system update in 2004 Control system: R&D MTC 2x-G

Condition: new, DAWN DN Series (Single Spindle) Dawn Machinery Machine overview Suitable for grinding inside and outside diameters as well as the end surface of heavy or non circular work pieces. Heavier work pieces can be more easily loaded to the machine by overhead hoist Fully enclosed covers and oil mist reclaiming device prevent leakage of grinding oil and mist. Machine options Model DN-500 Specification Model DN-500 Grinding Diameter (Max) 610mm ø Swing (Max) 610mm ø Max work height 400mm Motor Power 18/23kW Ndodpfjubbp Sox Afwsa CNC Control System SIEMENS 828D

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 1761-1700, 457 x 152mm capacity. Equipped with magnetic chuck, power rise and fall to wheel head, table guard, coolant system, and dust extraction. SPECIFICATION Jones & Shipman Model 540P Working Surface of table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor to table height 1035mm Table traverse speed range per min 1.5 – 18m Cross feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle center to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 2880rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution MACHINE EQUIPPED WITH Magnetic chuck Nsdpfxjnxi Uuo Afweda Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction

Condition: excellent (used), Year of construction: 1984, functionality: fully functional, machine/vehicle number: BO 94392, A familair machine in any toolroom, this Jones and Shipman 540P is equipped with a 6″ x 18″ magnetic chuck, power rise and fall, coolant system and dust extraction. A toolroom institution: USED Jones & Shipman Model 540P Horizontal Spindle Surface Grinding Machine Specification Nedpsnxi R Usfx Afweda Working Surface of the table 457 x 152mm Longitudinal traverse of table, hand and hydraulic 483mm Total cross traverse of table, hand and hydraulic 168mm Floor-to-table height 1035mm Table traverse speed range per min 1.5 – 18m Cross-feed range per stroke at each reversal 0.178 – 1.78mm Micrometer cross feed graduated in Vertical feed adjustment in increments of 0.002mm Vertical movement of wheelhead (max) 280mm Wheel spindle centre to table (min) 50mm Size of grinding wheel 180 x 13 x 31.75mm bore Speed of wheel 3000rpm Wheelhead motor 1.5kW Hydraulic pump motor 0.55kW Machine in Imperial execution Machine equipped with Magnetic chuck Power rise and fall to wheel head Table guard Wheel guard Coolant System Dust extraction Lighting

Condition: new, Perfectly built to optimise grinding and accuracy efficiency. Auto cross with hydraulic longitudinal. Manual vertical axis. Table longitudinal travel by sensor and solenoid valve - continuous lubrication. Specification Perfect D4080AH Saddle type surface grinder Table size 400 x 800mm Max. Grinding surface 400 x 800mm Max. distance centre of spindle to table 500mm (Option: 650mm) Table speed 5 ~ 25m/min Table guideway V & Flat way Auto. Cross feed increment approx. 0.5mm ~ 20mm Rapid power cross feed approx. 1100mm/min (60Hz) 900mm/min (50Hz) Cross feed on hand wheel 1 rev 5mm 1 gra 0.02mm Rapid power head elevation 550mm/min (60Hz) 450mm/min (50Hz) Vertical feed with MPG 1 rev 2mm 1 gra 0.01mm Auto down feed (Option) 0.001mm ~ 0.999mm/time Wheel speed 60Hz/50Hz 1750rpm (60Hz) 1450rpm (50Hz) Wheel dimensions 406 x 50 x 127mm Spindle motor 5HP Hydraulic pump motor 2HP Auto. Cross feed motor 1/5HP Standard Equipment Nedpenzh Uiofx Afweda Grinding wheel and wheel flange Flange extractor Wheel balancing arbor and base Wheel dresser with diamond Levelling screws and plates Tool box and tools Working light Manual AD5 Automatic downfeed control Magnetic chuck and demagnetiser Coolant system with paper filter

Condition: new, functionality: fully functional, NEW Perfect DT Series of machines with the touch screen display and easy to use interface. Automatic NC controlled downfeed operation with spark out. Plunge grinding, criss-cross grinding and surface grinding. 300 x 600mm grinding capacity Ndodpfsnzh T Njx Afwea 500mm spindle centre to table 355 x 38 x 127mm grinding wheel Fine pole mag chuck + demagnetiser Coolant system with paper filter and magnetic seperator NC Auto downfeed control system LCD touch screen control panel with easy to use graphical interface Criss-cross grinding function Auto criss stroke adjustment via the touch screen control Ballscrew and microfeed for the cross feed Stepless variable hydraulic system Quantitive lubrication system Back water splash shield