Used Broom for sale (323)

Condition: new, functionality: fully functional, machine/vehicle number: Produktpalette, empty load weight: 4,900 kg, maximum load weight: 30,100 kg, overall weight: 35,000 kg, axle configuration: 2 axles, loading space length: 7,200 mm, loading space width: 2,350 mm, loading space height: 1,600 mm, loading space volume: 27 m³, total length: 8,600 mm, total width: 2,550 mm, total height: 3,150 mm, suspension: air, tire size: 385/65 R 22.5, tire condition: 100 %, Custom-made transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are tailored to individual customer requirements. Lrjdpfsi Ri Niex Ac Ajn Further information Chassis, semi-trailer, tipper Fine-grain steel welded construction, in basic lightweight design, trailer plate with 2 interchangeable kingpins Curved front panel, patented 24-ton, 2-speed landing gear, single-sided operation, with straight lower part, without push-pull compensation Underrun protection, foldable Half-shell mudguards Tow hitch at the rear Axles + Suspension SAF disc brake axles with 430 mm disc diameter Axle/suspension laser-aligned, reducing tire wear and fuel consumption Axles in off-road design Air suspension 1st axle, automatic lift axle, including forced lowering and starting aid Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 fail-safe coupling heads at the front, without connecting line EBS, electronic braking system with EBS socket at the front, without connecting cable Note: The trailer may only be pulled by towing vehicles that ensure the effectiveness of the ABS! With lifting and lowering valve Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle, via EBS, without truck installation (this must be available in the truck. Only on standard tires) Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal "Flashing side lights" 2 x 7-pin fail-safe sockets at the front, without connecting cable Hydraulics Low-pressure cylinder, max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Operation hydraulically via truck auxiliary drive Body Steel round body in Stone Master design made of highly wear-resistant HB 400/450 steel. Inclined front wall with externally mounted hydraulic cylinder with access ladder on the front wall. Greenline - conical and aerodynamic body shape Shovel and broom holder on the outside of the front wall Membrane rear wall Rear wall as a hinged flap with double-joint hinge, mounted on the outside with double hook lock. 2 clamping screws with knob closures on the sides at the bottom. Side walls continuous, 4 mm thick, floor 4/5 mm thick, wear-resistant and weight-optimized construction Standing platform with access ladder, connecting plate for air/electricity and brake with large space for optimal operation Rollover cover on one side for stowage on the right, with central locking on the left Country of registration/ signs Germany With Dekra approval and certificate (according to §13 EG - FGV) Body strength according to EN 12642 24/7 service hotline Prepared for single-line license plate holder Contour marking with reflective tape according to ECE R 048, white on the sides and red at the rear Painting Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs, black coated Body, RAL color of your choice, solid color, subject to availability Rollover cover, RAL color of your choice, solid color Also available with hydraulic rear wall

Condition: new, machine/vehicle number: Produktpalette, empty load weight: 7,900 kg, maximum load weight: 31,100 kg, overall weight: 39,000 kg, axle configuration: 3 axles, loading space width: 2,330 mm, loading space height: 1,950 mm, loading space volume: 50 m³, total length: 11,200 mm, total width: 2,550 mm, total height: 3,470 mm, suspension: air, tire size: 385/65 R 22,5, Customized transport solution Configure your Fliegl vehicle according to your requirements. The vehicle shown is an example. Production and equipment are customized to meet individual customer needs. Further information Chassis, semi-trailer, tipper Fine-grained steel welded construction, lightweight design, with slight curvature, kingpin plate with replaceable 2" kingpin 24 tons, two-speed landing gear, single-sided operation, with straight lower part, without sliding adjustment Chocks with holder Rear underrun protection, foldable Half-shell fenders integrated fender holder, surface resistant to stone chipping Tarp pole with bracket Ljdpfx Aoi Rizqec Asrn Tow hitch at the rear Axles + Suspension BPW disc brake axles with 430 mm disc diameter Axle/chassis laser-aligned, reduces tire wear and fuel consumption Air suspension 1st axle: automatic lift axle, including forced lowering and starting assist Hot-dip galvanized lift axle mechanism, 10-year warranty against rust-through Braking system 2-line pneumatic braking system, color-coded lines for easy servicing Spring-loaded parking brake 2 non-interchangeable coupling heads at the front, without connection line EBS, electronic braking system with EBS socket at the front, without connection cable Note: The trailer may only be towed by towing vehicles that ensure the effectiveness of the ABS! with lifting and lowering valve Vehicle - driving stability system Wheels and tires 385/65 R22.5 Steel rims, factory silver "TPMS" tire pressure monitoring system according to ECE R 141, display on the towing vehicle's display, via EBS, without installation in the truck (this must be available in the truck as a prerequisite. Only for standard tires). Electrical system 24 Volt, multi-chamber lights, yellow LED lighting on the sides Yellow LED lighting on the sides linked to the turn signal "Flashing side lights" 2 white position lights at the front 2 white/red side marker lights at the rear 2 x 7-pole non-interchangeable sockets at the front, without connection cable Hydraulics Low-pressure cylinder max. 170 bar, smallest stage hard-chrome plated, with HDK screw connection, fixed part, NW 48 mm (without hose connection) Actuation hydraulically via truck auxiliary drive Tipping body Steel-rimmed tipping body made of highly wear-resistant HB 400 steel, sloping front wall with externally mounted hydraulic cylinder mount. Foldable aluminum splash guard on the right side for tarp. Shovel and broom holder on the outside of the front wall. Interior with ladder on the front wall. Side walls continuous 4 mm thick, floor continuous 5 mm thick Diaphragm - rear wall Rear wall with 2-leaf door division 1/2 to 1/2, with 1 slide in the right leaf. With externally mounted rotary rod lock and mechanical lock at the bottom. Standing platform with ladder, connection plate for air/electricity and brake with large clearance for best possible operability. Tarp on one side for storage on the right side, with central locking on the left side Country of registration / signs Germany Type approval according to EG 2007/46 Body strength according to EN 12642 24/7 service hotline prepared for license plate holder, single row Warning sign according to ECE - 70 Contour marking with reflective strips according to ECE R 048, white on the sides and red on the rear Paint finish Frame DB 7350 Novagrau 10-year warranty against rust-through Support legs, black coated Tipping body, RAL color of your choice, solid color Tarp, RAL 7035 light gray

Condition: new, Year of construction: 2026, functionality: fully functional, machine/vehicle number: 2026, warranty duration: 12 months, input voltage: 230 V, DGUV certified until: 06/2027, input frequency: 50 Hz, electrical fuse: 10 A, power: 0.5 kW (0.68 HP), Planetary mixer mixer Model: PL 10 sophisticated technology ... already proven many times! simple manual operation 3 transmission gears Lrsdpfx Aefxk Unsc Aen 1 stainless steel kettle 10 liters 1 flat beater 1 dough hook 1 broom Boiler protective grille / access protection Table machine with bowl lift Connection 220V, 550 watts DGUV V3-tested TOP quality and price in one machine! NEW machine exhibition machine Visit our Milbrandt outlet with a show bakery and many bakery machines and devices!

Condition: used, maximum load weight: 32,447 kg, overall weight: 42,000 kg, axle configuration: 3 axles, first registration: 01/2023, next inspection (TÜV): 10/2026, loading space length: 13,110 mm, loading space width: 2,400 mm, loading space height: 2,650 mm, loading space volume: 86 m³, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2023, Equipment: ABS, STAS 3-axle HardoX steel tipper, 86 m³ First registration 01/2023, from first owner Lredszahunopfx Ac Aon Mileage 171,700 km Dimensions (L x W x H): 13,110 x 2,350/2,450 x 2,770 mm (tapered design) Unladen weight: 9,640 kg Floor made of continuous 5 mm HardoX steel HB450 Front and side walls made of 3 mm HardoX steel HB450 Pneumatically foldable rear underrun protection Straight front wall, with internal access ladder Rear portal doors 50:50, pneumatic secondary release HYVA tilting cylinder, Alpha type, low pressure 2x pneumatic vibrators JOST cranked landing gear, full load capacity SAF axles with large disc brakes, 430 mm 1st axle: lifting axle WABCO trailer EBS with anti-roll protection RSS WABCO Smartboard Lifting and lowering device Automatic tipping lowering Tires: 6x 385/55 R 22.5 ALCOA aluminum rims, Dura-Bright, high-gloss Aluminum access ladder Shovel and broom holder Toolbox on the left 4x LED reversing lights RENTING is the new BUYING, and with us, full-service rental is immediately available. -----

Condition: new, maximum load weight: 29,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, loading space volume: 54 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5696 New vehicle! Available for rent, purchase, or lease with an option to buy! 54 m³ Kempf grain tipper semi-trailer with a discharge gate / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Type: SKM 36/3 AK - High-performance discharge gate tipper with 3 compartments * First registration: - (NEW) * Volume: approx. 54 m³ (10.00 m x 2.43 m wide x 2.20 m high) * Total weight: 36,000 kg * Unladen weight according to manufacturer: 7,000 kg * Payload: approx. 29,000 kg * Axles: 3x SAF axles / 1st axle can be lifted / disc brakes * Tires: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with raising and lowering / quick release * EBS Wabco * Combination door (swinging + split door (2/3 + 1/3)) * Pneumatic 4-hook locking system * Kempf 400 steel discharge gate with a throughput rate of 30-40 m³/h, with control panel on the rear right * 2x partitions with 3 locking positions * Open hose storage on the right * 1x grain slide with hopper * 1x vibrator * Saddle height of 1,170 mm - 1,230 mm * 1x approx. 4.00 m ladder on the left * 1x water tank on the right * 1x air connection on the rear left * 2x toolboxes on the left * Individual mudguards * Aluminum outrigger supports (full load supports) * Tarpaulin with central locking * Operating platform at the front with access ladder on the left * Folding tarpaulin supports * 3x crossbeams * Sight glass at the rear right * Loading pressure gauge * Shovel and broom holder * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights Lrsdpfxjy U Dlyo Ac Ajn New vehicle! Also available for RENT! Note regarding potential errors in the advertisement: Despite careful preparation of the advertisement, errors may have occurred in the text or the information provided. We assume no liability for errors, changes, or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: new, maximum load weight: 29,000 kg, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 10,000 mm, loading space width: 2,430 mm, loading space height: 2,200 mm, loading space volume: 54 m³, Year of construction: 2026, Equipment: ABS, Stock no. 5696 New vehicle! Available for rent, for purchase, or for lease with an option to buy! 54 m³ Kempf grain tipper trailer with a loading chute / 3 compartments / unladen weight only 6,750 kg! _____ * Manufacturer: Kempf * Type: SKM 36/3 AK - High-performance loading chute tipper with 3 compartments * First registration: - (NEW) * Volume: approx. 54 m³ (10.00m x 2.43m wide x 2.20m high) * Gross vehicle weight: 36,000 kg * Unladen weight according to manufacturer: 7,000 kg Lrsdpfxoy U Dl Tj Ac Aen * Payload: approx. 29,000 kg * Axles: 3x SAF axles / 1st axle liftable / disc brakes * Tires: 385/65 R22.5 NEW on Alcoa Dura-Bright rims * Suspension: Air suspension with raising and lowering / quick release * EBS Wabco * Combination door (swinging + split door (2/3 + 1/3)) * pneumatic 4-hook locking system * Kempf 400 loading chute made of steel with a throughput of 30-40 m³/h with control box on the rear right * 2x partitions with 3 locking positions * open hose storage on the right * 1x grain slide with hopper * 1x vibrator * Saddle height from 1,170mm to 1,230mm * 1x approx. 4.00m ladder on the left * 1x water tank on the right * 1x air connection on the rear left * 2x toolboxes on the left * Single mudguards * Aluminum outrigger supports (full load supports) * Tarpaulin with central locking * Operating platform at the front with access on the left * folding tarpaulin supports * 3x crossmembers * Sight glass on the rear right * Loading pressure gauge * Shovel and broom holder * 1x LED work light on the left * 1x LED work light on the right * LED reversing lights New vehicle! Also available for RENT! Note regarding possible errors in the advertisement: Despite careful preparation of the advertisement, errors may occasionally occur in the text or the specifications. We assume no liability for errors, changes or interim sales. All information is provided without guarantee. Please contact us to verify details or clarify any further questions.

Condition: used, mileage: 127,043 km, power: 62 kW (84.30 HP), first registration: 06/2013, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2013, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, This used Volkswagen T5 Transporter from 2013 is equipped with a 2.0 TDI diesel engine delivering 62 kW (84 hp). The vehicle has a mileage of 127,043 km and complies with the Euro 5 emissions standard. This panel van seats 3 people and features practical twin sliding doors as well as Parktronic. The exterior color is Ginstergelb (broom yellow). The 5-speed manual transmission delivers power to the front wheels. The engine has a displacement of 1,968 cc and the T5 is fitted with a total of four cylinders. Combined fuel consumption is 7.2 liters per 100 km with CO₂ emissions of 190 g/km. The vehicle dimensions are: height 1,970 mm, width 1,904 mm, length 4,892 mm, with a wheelbase of 3,000 mm. Viewings are possible from Monday to Saturday without prior appointment. For questions or further information, various contact options are available. Ljdoy Rgpaopfx Ac Aern Sale only to commercial traders (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 144,165 km, power: 70 kW (95.17 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, next inspection (TÜV): 11/2025, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.7 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,390 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi box van is from 2011 and complies with the Euro 5 emissions standard. The vehicle is powered by a 2.1-litre diesel engine delivering 70 kW (95 hp) and is equipped with an automatic transmission. The odometer reading is 144,165 km. The Sprinter has environmental badge 4 (green) and is registered until November 2025. Lrsdpfx Acjxb Ezgj Asn The Sprinter is finished in Ginstergelb (broom yellow) and features four doors and two seats. It has a length of 7,057 mm, a width of 2,100 mm, and a height of 2,694 mm. With a wheelbase of 4,325 mm, this vehicle provides ample space and stable handling. The permissible gross vehicle weight is 3,500 kg, which facilitates the transport of goods and equipment. The vehicle is equipped with cameras, a walkthrough access, and shelving units in the cargo area, optimizing it for various commercial applications. Combined fuel consumption is 9.9 litres per 100 km. Sale is only to businesses (agricultural, freelance, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: used, mileage: 92,365 km, power: 70 kW (95.17 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 262 g/km, fuel consumption (urban): 11.7 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.9 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,390 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 box is a used commercial vehicle that is ideal for commercial applications. Equipped with an automatic transmission and rear-wheel drive, this model offers an output of 70 kW (95 hp) and complies with the Euro-5 standard. The diesel engine has a displacement of 2,143 cc and the vehicle was first registered in June 2011. The striking broom yellow color ensures a distinctive look. The Sprinter has a mileage of 92,365 km and is equipped with a number of practical features, including a box body with passage and shelves and a rear view camera that makes maneuvering easier. With a height of 2,694 mm, a width of 2,100 mm and a length of 7,057 mm, it offers enough space for a wide variety of transport needs. The maximum payload is 3,500 kg, which makes the Sprinter a versatile companion in the commercial sector. The vehicle has a green environmental sticker (level 4) and the general inspection is valid until May 2023. Combined consumption is 9.9 l/100 km, with CO2 emissions of 262 g/km. This makes the Sprinter an efficient choice for companies that value cost-effectiveness and environmental friendliness. Viewings are possible without registration. Lrsdpfxstfaizj Ac Asn Only sold to businesses (agriculture, freelancers, small and large businesses) or export. Subject to errors and prior sale.

Condition: used, mileage: 142,357 km, power: 70 kW (95.17 HP), first registration: 01/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, fuel: diesel, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi is a used box van with Euro 5 emissions standard, first registered in January 2011. The vehicle has a mileage of 142,357 km and is powered by a 2,143 cc diesel engine delivering 70 kW (95 hp). It features an automatic transmission and offers seating for two occupants. The eye-catching Ginstergelb (broom yellow) paintwork complements the robust appearance of the vehicle. The total permissible weight of the van is 3,500 kg. Exterior dimensions are generous, with a length of 7,057 mm, width of 2,100 mm, and height of 2,694 mm. The Sprinter is equipped with an environmentally friendly green emission sticker (category 4), making it suitable for operation in inner-city zones. Additional features include fitted shelving, a camera system for improved visibility while driving, and a walkthrough option for easier access. Registration service and delivery within Germany can be arranged at extra cost. Sale exclusively to trade customers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted. Lrodsxb Ezmspfx Ac Ajn

Condition: used, mileage: 98,950 km, power: 70 kW (95.17 HP), first registration: 04/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi van is a versatile commercial vehicle from 2011 with a mileage of 98,950 km. Equipped with a 2.1-liter diesel engine and an output of 70 kW (95 hp), it meets the Euro 5 emissions standard. The vehicle has an automatic transmission and rear-wheel drive. The broom-yellow Sprinter offers a variety of special equipment, including an adaptive brake light, electrically adjustable and heated exterior mirrors and a roof panel in the driver's cab. Lrodpfetfad Dox Ac Asn The Sprinter offers extensive equipment such as air conditioning in the driver's cab, a lockable glove compartment and a 75-liter fuel tank. Other features include hill start assist, anti-roll bars at the front and rear and a brake assistant. With a length of 7,057 mm and a wheelbase of 4,325 mm, the van is particularly well suited for transporting goods. Additional equipment also includes radio preparation and steel rims. With a combined consumption of 9.8 liters/100 km and CO2 emissions of 259 g/km, it is an efficient choice for companies looking for robust and reliable transport solutions. The Sprinter offers various loading options and, for an additional charge, delivery within Germany. Viewings are possible without registration. Only sold to businesses (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale reserved.

Condition: used, mileage: 106,378 km, power: 70 kW (95.17 HP), first registration: 04/2011, fuel type: diesel, empty load weight: 2,550 kg, maximum load weight: 950 kg, overall weight: 3,500 kg, axle configuration: 4x2, wheelbase: 4,325 mm, fuel: diesel, CO₂ emissions: 259 g/km, fuel consumption (urban): 11.1 l/100km, fuel consumption (extra-urban): 9.2 l/100km, fuel consumption (combined): 9.8 l/100km, color: yellow, driver cabin: other, gearing type: automatic, emission class: euro5, suspension: other, number of seats: 2, total length: 7,057 mm, loading space length: 4,380 mm, loading space width: 2,000 mm, loading space height: 2,000 mm, Year of construction: 2011, construction height: 2,690 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, traction control, The Mercedes-Benz Sprinter 310 CDI Maxi Euro-5 is a versatile used van that is ideal for a variety of commercial purposes. The van was first registered on April 5, 2011 and has a mileage of 106,378 kilometers. With a 2.1-liter diesel engine, an output of 70 kW (95 hp) and an automatic transmission, the vehicle offers efficient performance and reliability. It also has rear-wheel drive and meets the Euro 5 emissions standard. The vehicle features a comprehensive range of optional equipment, including electronic and heated exterior mirrors, an adaptive brake light system, and a walk-through to the driver's cab. The Sprinter has a metallic paint finish in broom yellow and the interior is upholstered in Lima fabric. Safety features such as a driver airbag, ABS, ASR and a brake assist are also available, which provide additional safety on the road. With a width of 2,100 mm, a height of 2,694 mm and a length of 7,057 mm, this Sprinter offers a generous loading area for your goods. The wheelbase of 4,325 mm and the permissible total weight of 3,500 kg make this van robust and resilient. A roof panel in the driver's cab as well as mud flaps at the front and reinforced stabilizers complete the functional equipment of this vehicle. Sold only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale reserved. Lsdpfx Acep Nbd Te Asrn

Condition: used, Year of construction: 2020, operating hours: 546 h, functionality: fully functional, overall weight: 219 kg, tank capacity: 17 l, The used Kärcher CV60/2 RS is a stand-on carpet brush vacuum from 2020 with approximately 546 operating hours. Featuring two counter-rotating brush rollers and a practical side broom, the versatile CV 60/2 RS brush vacuum is ideal for cleaning textile floor coverings and all types of hard surfaces. For vacuuming smaller areas, the machine is equipped as standard with a retractable suction hose and wand, a combination floor nozzle, and small nozzles. Technical specifications: Working width: 61 cm Dust bag volume: 17 liters Dimensions: 1120 x 640 x 1290 mm Lrjdpfjy Am D Uox Ac Ajn

Condition: used, mileage: 133,093 km, power: 62 kW (84.30 HP), first registration: 07/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, construction height: 1,970 mm, Equipment: ABS, central locking, immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI offers a reliable diesel engine delivering 62 kW (84 hp) and complies with the Euro 5 emissions standard. This van was first registered on 07/07/2011 and has a mileage of 133,093 km. Featuring a practical 5-speed manual transmission and a 1,968 cc engine, this panel van ensures efficient fuel consumption with a combined average of 7.2 l/100 km. The CO2 emissions are 190 g/km, qualifying the vehicle for the green environmental badge. Especially practical are the two sliding doors on both sides of the vehicle, making loading and unloading much easier. The Ginstergelb (broom yellow) paintwork gives the Transporter a striking appearance. With dimensions of 4,892 mm in length, 1,904 mm in width, and 1,970 mm in height, the T5 Transporter offers ample load space. The permissible gross weight is 2,800 kg, making it ideal for a variety of commercial applications. Ljdpfxjy Nyl Ss Ac Aorn The vehicle is in used condition and has had one previous owner. Equipment includes truck registration and a durable wooden floor in the cargo area. Viewing is possible at any time from Monday to Friday, as well as on Saturdays. Sale only to commercial buyers (agriculture, freelancers, small and large businesses) or for export. Subject to prior sale and errors excepted.

Condition: used, mileage: 158,223 km, power: 62 kW (84.30 HP), first registration: 06/2011, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,501 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2011, lifting height: 2,800 mm, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI offers an efficient solution for commercial users, particularly thanks to its Euro 5 emissions class. Equipped with a 1,968 cc diesel engine and delivering 62 kW (84 hp), it strikes a good balance between performance and fuel economy. The vehicle features a 5-speed manual transmission and is finished in Ginstergelb (broom yellow). The odometer reads 158,223 km. Lrodpfx Aoy Nyi Doc Aon The T5 is equipped with practical features such as two sliding doors on both sides, significantly facilitating access, and a wooden floor panel in the cargo area for added durability. With a combined fuel consumption of 7.2 l/100 km and CO2 emissions of 190 g/km, this model is well suited for both urban operations and longer journeys. Vehicle dimensions are 4,892 mm in length, 1,904 mm in width, and 1,970 mm in height, with a wheelbase of 3,000 mm, providing ample space for various loading requirements. The condition is well maintained; the vehicle is registered as a used vehicle. With a capacity of three seats, it is ideal for small teams or solo operations. First registered in June 2011, it has had only one previous owner. Viewings are possible without prior appointment. Sale only to commercial customers (agriculture, freelancers, small and large businesses) or for export. Subject to errors and prior sale.

Condition: used, mileage: 99,045 km, power: 62 kW (84.30 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The used Volkswagen T5 Transporter, year of manufacture 2010, offers flexibility and performance for commercial use. This vehicle is powered by a 2.0 TDI diesel engine delivering 62 kW (84 hp) and complies with the Euro 5 emissions standard. It is equipped with a manual transmission and provides economical operation with an average combined fuel consumption of 7.2 l/100 km. This van was primarily operated by one previous owner and has a mileage of approximately 99,045 km. With its robust construction and truck registration, the T5 is ideal for transporting goods—especially thanks to its two sliding doors on both sides. The cargo area is fitted with a sturdy wooden floor, offering additional flexibility during loading. Presented in Ginstergelb (broom yellow), the T5 is also equipped with parking sensors (Parktronic) to facilitate maneuvering. The main inspection (TÜV) is valid until December 2024, and the vehicle is immediately available for use by both large and small businesses or for export. Nationwide delivery within Germany is available for an additional fee. Ledpsy Nyknefx Ac Aorn Sale only to commercial customers (agricultural businesses, freelancers, small and large enterprises) or for export. Subject to prior sale and errors.

Condition: used, mileage: 126,920 km, power: 62 kW (84.30 HP), first registration: 11/2010, fuel type: diesel, empty load weight: 1,762 kg, maximum load weight: 1,038 kg, overall weight: 2,800 kg, axle configuration: 4x2, wheelbase: 3,000 mm, fuel: diesel, CO₂ emissions: 190 g/km, fuel consumption (urban): 9.4 l/100km, fuel consumption (extra-urban): 6 l/100km, fuel consumption (combined): 7.2 l/100km, color: yellow, driver cabin: other, gearing type: mechanical, emission class: euro5, suspension: other, number of seats: 3, total length: 4,892 mm, loading space length: 2,500 mm, loading space width: 1,600 mm, loading space height: 1,300 mm, Year of construction: 2010, construction height: 1,970 mm, Equipment: ABS, airbag, central locking, electronic stability program (ESP), immobilizer system, onboard computer, soot filter, traction control, The Volkswagen T5 Transporter 2.0 TDI offered here conforms to Euro 5 emissions standards and is a versatile used vehicle, ideally suited for commercial users or export. The vehicle, finished in eye-catching Ginstergelb (broom yellow), is equipped with sliding doors on both sides and features a spacious loading area with a wooden floor, providing optimal accessibility and flexibility for any transport requirement. With a mileage of 126,920 km and first registration in November 2010, this transporter is in well-maintained condition. The 2-litre diesel engine delivers 62 kW (84 HP) and achieves average fuel consumption of 7.2 l/100 km. The manual transmission ensures precise driving control. Lsdsy Nykhepfx Ac Aorn This vehicle meets the Euro 5 emission standard and carries a green emissions sticker (category 4). It is already registered as a commercial vehicle (LKW) and offers seating for three people. Additional practical features include parking sensors to facilitate maneuvers and parking. TÜV (roadworthiness inspection) is valid until November 2024. This makes it an ideal partner for businesses that rely on dependable and flexible transport solutions. Sale only to trade customers (agriculture, freelancers, small and large businesses) or for export. Errors and prior sale excepted.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space volume: 68 m³, Year of construction: 2026, Equipment: ABS, Chassis material: Steel Chassis type: Z-chassis King pin: National 12t Axle load: National 8t Axle distance (mm): 1310-1310 Saddle height (mm): 1150 Chassis width (mm): 1400 Loading width (mm): 2325 Internal height front (mm): 2,460 Internal height rear (mm): 2,460 Loading length (mm): 11,744 Overall width (mm): 2550 Wheelbase (mm): 7,753 Overall length (mm): 13,148 Axles, brakes and suspension Axles: SAF Axle version: Intra Brake type: SAF - SBS 2220 Offset (ET): 120 Option 1: First axle with lift axle and starting assist Starting assist activation: via button in the truck and by pressing the brake pedal 3 times Option 3: Third axle with lift axle Brake pad wear indicator: not connected Air spring protection plate Air suspension: ECAS with lifting and lowering valve Automatic lowering of the air suspension during tilting, manually lockable via Smartboard and switch on the chassis Coupling head: Pneumatic European Palm coupling Control console: EBS operation on the left side in driving direction, in front of the axles, type Smartboard Air and electrical console: on the right side in driving direction Outrigger winch type: JOST MODUL Tire size: 385/65R22.5 Tire pressure monitoring: Wabco Trailerpulse TPMS sensor type: Rim-mounted sensor TPMS sensor supplier: ZF Wheel nut covers: chrome Lighting type: ECOLED III 2 LED reversing lights at the rear, on the left and right sides in driving direction 2 LED reversing lights at the front, on the left and right sides in driving direction, in the area of the outrigger winches Operation: Underrun protection manually Tow hitch: 1 piece on the left side in driving direction Make: Tilting cylinder Hyva Type: Tilting cylinder with small housing Tilting angle: Normal ±47° Model: Tilting cylinder Hyva - FC 169 Stroke: Tilting cylinder 8130, max. PTO pressure 250 Hydraulic coupling: Rotary coupling Hydraulic coupling - size: 1 Hydraulic coupling - gender: Female Hydraulic coupling - hose: 2,100 mm Toolbox: Plastic Position: Toolbox on the left side in driving direction, in front of the axles Dimension: Toolbox - left side in front of the axles: 830x500x470 Aluminum ladder: with 2.8 m length, on the right side 3x broom and shovel holders on the front wall on the left side in driving direction Load pressure gauge: Ø 100 mm - at the front of the chassis Two plastic chocks Front wall inclination (°): 20 Rear wall inclination (°): 90 Front wall: Made of 3 mm HB450 Side wall: Made of 4/3 mm HB450 Floor: Made of 5 mm HB450 Position: Rubber pads attached below the floor cross members Rear wall type: Hinged doors Rear wall: Made of 3 mm HB450 Number of hinges: Rear wall 3 pairs of door hinges Design: Hinged door, split 1/2 to 1/2, with 1 piece latch Door opening: The door leaves open to the right first Slider: Rectangular design, with polyamide guide Slider position: 1 piece on the right Fastening of the open door leaves: via chain Sealing: Rear wall with rubber sealing in the lower area, extending 500 mm to the side Lrsdpfx Aezctkgsc Aen Additional locking: Rear wall, pneumatic, double-acting Operation of the additional locking: manually via control on the side of the instrument panel Design: Tarpaulin winding: Winding slat Type: Steel uprights in trapezoidal design, foldable Number and position of the uprights: 3 pieces, center uprights, evenly distributed over the entire loading area Tarpaulin holders: in rotatable design, removable Number of tarpaulin holders: 3 pieces Positions: Tarpaulin holders, right side wall Front wall tarpa

Condition: used, mileage: 100 km, power: 129 kW (175.39 HP), first registration: 06/2024, fuel type: diesel, overall weight: 7,490 kg, color: white, gearing type: mechanical, loading space length: 3,600 mm, loading space width: 2,000 mm, loading space height: 400 mm, Year of construction: 2024, Equipment: ABS, air conditioning, central locking, soot filter, Fuso Canter 7C18 with Meiller Tipper and Day Registration 3L Turbo Diesel Engine 129 kW / 175 HP EURO 6 Start/Stop System Wheelbase: 2800 mm Lrodpfx Acjyrk E Hj Asn Payload approx. 4,000 kg Rear axle with twin tires and differential lock Traction tires 205/75 R16C 4-wheel disc brakes Electronic Stability Program (ESP) ABS with Electronic Brakeforce Distribution Tow bar with ball coupling Comfort cab with the following features: Electric windows Central locking with remote control Immobilizer Adjustable steering wheel and column Driver airbag Double DIN radio with Apple CarPlay and rear-view camera Digital tachograph EU control device for tachograph Storage above windshield & behind seat Double passenger seat Driver's seat with armrest Lockable glove compartment Fog lights with automatic daytime running lights Tilting cab Lane departure warning system Brake assist Automatic climate control LED headlights Meiller Three-Way Tipper Body 3600 x 2000 x 400 mm Steel sideboards Rear swing tailgate Front board extension with broom and shovel holder Access ladder Manufacturer warranty until 06/2027 Optional Winter Package: Consisting of 2m³ spreader and snow plough. More vehicles from Fuso Canter and Multicar available at: Leasing / Financing / Trade-in ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale, and errors Our terms and conditions apply.

Condition: used, axle configuration: 2 axles, first registration: 07/2022, loading space volume: 25 m³, Year of construction: 2022, Equipment: ABS, Thermo tipper body, 2-axle Internal length approx. 7,650 mm (7,350 mm + 300 mm, due to external tailgate) Internal width approx. 2,330 mm Internal height approx. 1,470 mm Load volume approx. 25 m³ Maximum overall width 2,550 mm Lrsdpfxoy Dyt Se Ac Aen - BPW EcoDisc axles with disc brakes Ø430 mm (22.5 disc) - Front axle with automatic lift: raises and lowers depending on load, includes forced lowering and integrated start-up aid with speed limiter (Traction Help Plus) - Tires 385/65 R 22.5 - Aluminum half-round segment body, floor thickness 6 mm (continuous floor plate), wall thickness 6 mm, front and rear wall inclined, flush with top edge - Continuous Hardox steel wear plate 3 mm thick, approx. 2,430 mm wide, with welded-on aluminum edging - Thermal insulation according to DIN 70001: R-value 1.65 m²K/W (at 20°C), complete body insulation approx. 50 mm thick with 1 mm aluminum cladding or 3 mm at rear wall, fully sealed - High-pressure front-mounted cylinder for rear tipping, tipping angle approx. 50 degrees (ground clearance when tipped approx. 650 mm) - Plastic roll tarpaulin including aluminum tube and hand crank - Partially LED rear lights - Additional LED reversing spotlights - Broom/shovel holder mounted laterally on the longitudinal beam All information provided without guarantee. Subject to errors and prior sale.

Condition: new, overall weight: 36,000 kg, axle configuration: 3 axles, loading space length: 9,205 mm, loading space width: 2,350 mm, loading space height: 2,100 mm, loading space volume: 47 m³, Equipment: ABS, Overall width 10,402 mm Floor length 8,585 mm Overall width 2,550 mm Ljdpop Ncb Nofx Ac Asrn Overall height to upper frame 3,550 - 3,600 mm Overall height to tarpaulin tip 3,710 - 3,760 mm Track width 2,040 mm Distance from kingpin to 2nd axle 6,120 mm Fifth wheel height 1,200 mm Axle spacing 1,310 mm Rear overhang 1,367 mm Ground height 1,400 - 1,450 mm Max. height with tipped body 9,720 - 9,770 mm Technical gross weight 42,000 kg Axle load 8,000 kg Technical axle load 9,000 kg Fifth wheel load 12,000 kg Technical fifth wheel load 15,000 kg Load volume 47.6 cbm Unladen weight 6233 kg The weight is specified with an accuracy of -3%. Wheelbase 1310 Distance: 2nd axle kingpin: 6120 mm Steel underrun protection Foldable rear underrun protection Chassis frame with lowered gooseneck frame, longitudinal members with recessed fifth wheel plate area Welded construction, weight-optimized from high-strength S700 steel Side impact protection made of aluminum profiles according to ECE 73 2 plastic wheel chocks Axles and suspension 1200 mm fifth wheel height unloaded Rigid axles 3rd lifting axle 1st lifting axle SAF disc axles 3x 9000 kg 22.5 INTRADISC CD 2-speed transmission supports, full load (BPW Gen2 FL/SAF) Hercules) 6 solid PVC fenders Rubber mud flaps with Wielton logo behind the third axle 6 steel rims 22.5-11.75 ET=120 Wheel nut caps Tires 6 standard 385/65/22.5 tires (Bridgestone/Hankook) Other chassis equipment 44 L toolbox (mounted at the front of the chassis (left side)) 30 L water tank (mounted in the middle of the chassis (left side)) 1 dust bag holder on the chassis 2 dust bags Shovel and broom on the chassis, above the fender Rear extendable ladder Interior height 2100 mm Two-wing aluminum combination door, aluminum (1/2 ?) vertical with portal beam Side walls SL interior thickness 2.5 mm, fully welded Front wall tilted at 20 degrees Pallet width version 7 mm floor 2 grain pushers 2 lower tension locks Floor Cross member spacing below the floor: 360 mm Polyp body damper Other body equipment Tensioning chain between the side walls Operating station on the chassis frame, access in FR on the left (driver's side) 680 g/m² PVC roll-top tarpaulin with quick-release fastener and aluminum winding tube (with vertical rear end with triangle attachments at the front and rear, center tube welded into the tarpaulin) Braking system/Pneumatics Steel air chamber Spring-loaded pressure gauge Automatic lowering when tipping Wabco braking system 2S/2M Chassis paint finish Chassis paint finish RAL 7021 (black gray) Body paint Body paint RAL 7001 (silver gray) Tarpaint color RAL 9006 (white aluminum) Hydraulics HYVA hydraulic cylinder, eye-mounted top Hydraulic connection kit 1? Electrics Partial LED lighting LED reversing lights (2 pcs.) 2x 7-pin, 1x 15-pin with EBS connection, without connecting cables to the tractor unit Lighting: Partial LED Aspöck EUROPOINT III 2 LED work lights on the support legs Additional systems Tilt angle indicator Control cable for the lift axle from the driver's cab This system was developed for semi-trailers and trailers and is used to monitor the vehicle's tire pressure and tire temperature. Manufacturer: ABERG Connect. The system consists of TPMS sensors (tire pressure and temperature) mounted on the wheel rims and a device connected to the EBS. Reflective warning signs Partial contour markings with Wielton logo Partial contour markings in white on the sides

Condition: new, axle configuration: 3 axles, loading space length: 8,880 mm, loading space width: 2,475 mm, loading space height: 2,165 mm, loading space volume: 476 m³, total width: 2,550 mm, total height: 2,165 mm, Year of construction: 2026, Equipment: * Chassis material: aluminium * Chassis type: V-chassis * King pin load National (t): 12 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1175 * Chassis width (mm): 1400 * Loading width (mm): 2475 * Chassis series: 080 * Internal height front (mm) (IHF): 2165 * Internal height rear (mm) (IHB): 2165 * Loading length (mm): 8880 * KC-Value: 0400 * Overall width (mm): 2550 * Volume (m³): 47.5824 * Wheelbase (mm) (WB): 5800 * Overall length (mm): 10259 * Chassis * Axles, brakes and suspension * SAF axles * Offset (ET): 120 * Option: 1st axle with lift axle and traction assist * Option: 3rd axle with lift axle and Optiturn * Activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift and lower valve * Automatic lowering of air suspension during tipping, manually lockable via Smartboard and chassis switch * Pneumatic coupling head: European palm coupling * Control console: EBS operation on driver's side before the axles * Standard Smartboard * Air and electrical console, passenger side * Landing gears: Weweler steel gear landing gears, type Weweler, with compensating feet, one-sided operation, and 2-speed function * Tyre size: 385/65R22.5 * Tyre pressure monitoring: Wabco Trailerpulse * Rims: Alcoa Dura Bright * Tyre type: Regional application * TPMS sensor type: rim-mounted sensor * TPMS sensor included * Chrome wheel nut covers with STAS logo * Working lamp position (operated by switch): 2 LED reversing lights at the rear, left and right, mounted on the lamp bar * Working lamp position (operated by switch): 2 LED reversing lights at the front, left and right, mounted near the landing legs * LEDs in door end cross member: 2 x 3-function LED * Underrun protection: manual operation * Tow hooks: 2 pcs left and right * Mud flaps underrun protection: black with STAS logo * Cylinder tipping angle, normal: ±47° * Tipping cylinder model: Hyva - FC 169 * Tipping cylinder stroke: 6480 * Max. tipping cylinder pressure: 250 * Cylinder stage surface treatment: standard finish * Hydraulic coupling: rotary coupling * Hydraulic coupling size: 1 * Hydraulic coupling gender: female * Hydraulic coupling hose: 2,500 mm Lrodey Dmvaspfx Ac Aon * Mudguard type: Domar STAS with white stripe * Number of mud flaps on mudguard: 2 pcs * Mudguard mud flap type: asphalt * Toolbox: 860x520x500 * Aluminium ladder 3 m - passenger side * Broom and shovel holder * Ferry lashing rings * 2 lashing rings at the rear of the chassis * Two plastic wheel chocks * Retention device chassis to body: rubber buffer Body: * Front wall tilt (°): 20 * Rear wall tilt (°): 90 * Inner lower belt profile tilt (°): 45 * Front wall: 4 mm (aluminium) * Side wall profile: 3 mm - 2 mm * Floor: 8 mm aluminium - 110 Brinell * Rubber pads installed under floor crossmembers * Rear wall type: combination door * Combination door type: 2/3 - 1/3 with swiveling door cross member * Door leaf opening: right leaf opens first * Swiveling door end cross member * Hinge type: double door hinge * Slide gate: rectangular design * Slide gate position: 1 piece, centred * Grain outlet / dust bag: 1 grain funnel incl. dust bag * Smooth rear wall surface * Fastening of opened door leaves secured by chain * Rear wall gasket with standard rubber seal * Extra aluminium round profile

Condition: new, axle configuration: 3 axles, loading space length: 10,613 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 604 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: ABS, Equipment: * Chassis type: moving floor * King pin load national (t): 12 * Fifth wheel height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) moving floor semi-trailer (mm): 6250 * Internal height front (mm) (IHF): 2300 * Internal height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Chassis neck height (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Overall length (mm): 11420 * Axles: JOST * Brake type: disc brake * Brake version: JOST - DCA-T7 (Knorr Bremse) * Offset (ET): 120 * Option 1st axle: lift axle with start assist * Start assist activation via push button in the truck * Option 3rd axle: lift axle with Optiturn, activation of additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * ECAS air suspension with lift and lower valve * Lowering of air suspension via Smartboard, as well as lift/lower valve * Control console for EBS operation on the left side in driving direction, ahead of the axles * Standard Smartboard * Central air and electrical console with gantry * Landing gears: aluminum drop supports * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura Bright * TPMS sensor type: rim-mounted sensor * TPMS sensor supplier: ZF * Wheel nut caps: chrome with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs * 2 LED reversing lights installed at the rear, left and right in driving direction, behind the axles * 2 LED reversing lights installed at the front, left and right in driving direction, near the landing gears * 1 unit inside at the front wall on the left in driving direction * Lighting unit protection: one-piece fender * LEDs in tailgate crossbar: 2 x 3-function LED * Underrun protection * Mud flap underrun protection, black with STAS logo * Moving floor control console positioned on the left behind the axles * Hydraulic coupling: rotary coupler * Hydraulic coupling - size 3/4 * Hydraulic coupling - female * Hydraulic return coupling: rotary coupler * Hydraulic return coupling - size 1 * Hydraulic return coupling - female * Hydraulic hose: 3,000 mm * Hydraulic coupling - connection option at the front wall * Hydraulic coupling - standard version * Hydraulic connections: pressure left, return right, via rotary coupler (CON) * Toolbox: plastic * Air connection in toolbox * Aluminum access ladder, 2.5 m extension * Broom and shovel holder * Two plastic wheel chocks * Front wall inclination (°): 90 * Rear wall inclination (°): 90 * Service door on the left side in driving direction * Side wall profile: 3 mm - 2 mm * Moving floor system brand: Cargo Floor * Moving floor operation: remote control * Moving floor system: CF 500 SL-C - E-CONTROL * Number of floor slats: 21 * Floor slat type: 11 mm smooth, overlapping, end plate moving floor aluminum * Oil temperature sensor for moving floor system * Clean-out partition wall: aluminum with brushes * Clean-out partition wall bearings: 6 wheels with bidirectional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors Lrodey I Hr Nepfx Ac Aen * Rear wall: aluminum * Bumper protection for rear doors: aluminum dock bumpers * Number and position of roof bows: 2 central bows (centrally and evenly spaced) and 1 rear bow (at the rear) * Curtain holders: straight design, 4 pcs on right side wall * Catwalk/ladder * Catwalk at front wall * Folding A-shield * Fixed aluminum cover plate between floor and front wall

Condition: new, axle configuration: 3 axles, loading space length: 10,613 mm, loading space width: 2,475 mm, loading space height: 2,300 mm, loading space volume: 604 m³, total width: 2,550 mm, Equipment: ABS, Equipment: * Chassis type: moving floor * Kingpin load (national, t): 12 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Wheelbase (WB) moving floor trailer (mm): 6250 * Interior height front (mm) (IHF): 2300 * Interior height rear (mm) (IHB): 2300 * Loading length (mm): 10613 * Chassis neck height (mm): 240 * Overall width (mm): 2550 * Volume (m³): 60.4145 * Total length (mm): 11420 * Axles: JOST * Brake type: disc brake * Brake model: JOST - DCA-T7 (Knorr Bremse) * Offset (ET): 120 * Option: 1st axle with lift axle and starting aid * Starting aid activated via button in the truck * Option: 3rd axle with lift axle and Optiturn, additional lift axle control via Wabco Smartboard * Brake pad wear indicator connected * Return-to-ride (RTR) 15 km/h * ECAS air suspension with lift/lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Control console for EBS operation on the left in driving direction, ahead of axles * Standard Smartboard * Central air and electrical console with gallows * Landing gear: aluminium drop legs * Tire size: 385/65R22.5 * Tire pressure monitoring: Wabco OptiTire * Rims: Alcoa Dura Bright * TPMS sensor type: rim-mounted sensor * TPMS sensor supplier: ZF * Wheel nut covers: chrome with STAS logo * Lighting type: ECOLED III – with STAS logo * Reversing lights: 2 units * 2 LED reversing lights at rear, left and right in direction of travel, mounted behind the axles * 2 LED reversing lights at front, left and right in direction of travel, mounted near landing gear * 1 unit inside on the front wall, left in direction of travel * Lighting unit protection: one-piece splash guard * LEDs in door cross member: 2 x 3-function LED * Underrun protection * Mud flaps on underrun protection, black with STAS logo * Position of moving floor control console: left behind the axles * Hydraulic coupling: rotary coupling * Hydraulic coupling – size: 3/4 * Hydraulic coupling – gender: female * Hydraulic return coupling: rotary coupling * Hydraulic return – size: 1 * Hydraulic return – gender: female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling – connection option on front wall * Hydraulic coupling – standard execution * Hydraulic positioning: pressure left, return right (CON) * Tool box: plastic * Air connection in tool box * Aluminium ladder, extendable to 2.5 m * Broom and shovel holder * Two plastic chocks * Front wall inclination (°): 90 * Rear wall inclination (°): 90 * Service door: left in direction of travel * Side wall profile: 3 mm – 2 mm * Moving floor system brand: Cargo Floor * Operation of floor system: radio remote control * Moving floor system: CF 500 SL-C – E-CONTROL * Number of floor slats: 21 * Type of floor slat: 11 mm smooth, overlapping, aluminium closing plate * Oil temperature sensor for moving floor system * Clean-out wall: aluminium with brushes * Clean-out wall mounting: 6 wheels with bidirectional cleaning (Cargo Floor) * Rear door * Rear wall type: swing doors * Rear wall: aluminium * Bumper: aluminium rear door bumpers * Number and position of stanchions: 2 centre stanchions (centrally, evenly spaced) and 1 rear stanchion (rear) * Tarpaulin holders, straight version: 4 units on right side wall * Catwalk/ladder * Catwalk on front wall * Folding A-sign Lrsdpfx Acsy I Hr As Aon

Condition: new, loading space length: 13,513 mm, loading space width: 2,475 mm, loading space height: 2,641 mm, loading space volume: 91 m³, total width: 2,550 mm, Year of construction: 2026, Equipment: * Chassis material: Steel * Chassis type: Moving floor * Kingpin load (national, t): 12 * Axle load (national, t): 8 * Axle spacing (mm): 1310-1310 * Saddle height (mm): 1150 * Chassis width (mm): 1200 * Loading width (mm): 2475 * Chassis series: 135 * Wheelbase (WB) moving floor trailer (mm): 7850 * Internal height front (mm) (IHF): 2641 * Internal height rear (mm) (IHB): 2778 * Loading length (mm): 13513 * Chassis neck height (mm): 217 * Total width (mm): 2550 * Volume (m³): 90.6183 * Total length (mm): 14000 * Axles: SAF * Axle version: Intra * Brake version: Disc brake * Brake type: SAF - SBS 2220 (Haldex) * Offset (ET): 120 * Option 1st axle: lift axle with traction aid * Activation of traction aid via button in truck (button installation not included) and by pressing the brake pedal three times * Option 3rd axle: with lift axle * Brake pad wear indicator connected * Return-to-ride (RTR): 15 km/h * Air suspension: ECAS with lift and lower valve * Lowering of air suspension via Smartboard and lift/lower valve * Pneumatic coupling head: European palm coupling * Operating console: EBS operation on the left in the direction of travel, mounted behind axles * Standard Smartboard * Central air and electrical console with gallows * Landing gears: Weweler * As steel gear-type landing legs, Weweler model, with compensating feet, single-sided operation and 2 speed levels * Landing leg crank handle position: outside * Tyre size: 385/65R22.5 * Tire pressure monitoring: Wabco Trailerpulse Lodpfxsy Dmu Nj Ac Asrn * Rims: steel * TPMS sensor type: rim-mounted sensor * Wheel nut caps: black - PVC with STAS logo * Lighting type: ECOLED III - with STAS logo * Reversing lights: 2 pcs LED reversing lights, rear left and right in direction of travel, mounted on lamp bracket * Working light position (operated by switch): 2 pcs LED reversing lights at the front, left and right in the direction of travel, mounted near the landing gears * Lighting unit protection: one-piece mudguard * LEDs in rear door crossmember: 2 x 3-function LED * Operation underrun guard: Fixed underrun bar * Splash guards for underrun guard: black with STAS logo * Hydraulic coupling: rotary coupling * Hydraulic coupling - size: 3/4 * Hydraulic coupling - gender: Female * Hydraulic return coupling: rotary coupling * Hydraulic return coupling - size: 1 * Hydraulic return coupling - gender: Female * Hydraulic coupling hose: 3,000 mm * Hydraulic coupling position: connection option at front wall (additional connection option at landing leg) * Hydraulic positioning: pressure left, return right (CON) * Number of splash guards at mudguard: 2 pcs * Toolbox * Air connection: side-mounted on control panel * Aluminium ladder 3.80 m - right side in direction of travel * Broom and shovel holder * Two plastic wheel chocks * Bulkhead profile: 3 mm - 2 mm * Side wall profile: 3 mm - 2 mm * Moving floor system manufacturer: Cargo Floor * Floor system operation: radio remote control * Cargo Floor control type: CF 500 SL-C - E-CONTROL * Number of floor profiles: 21 * Bulkhead angle (°): 90 * Rear wall angle (°): 90 * Floor profile type: 8 mm ribbed * Oil temperature sensor for moving floor system * Clean-out wall: aluminium * Clean-out wall mounting: 6 wheels with bi-directional cleaning (Cargo Floor) * Door type: double-wing doors, divided 1/2 to 1/2, with crossmember at door end