Used Bru 105 for sale (3,019)

Condition: used, FRT MicroSpy Device Designation: FRT MicroSpy Mobile Art. No. MSP 105 00 Device Number: MSP1033 Bwsdpfx Aiozdnqcowew FRT MicroSpy Mobile Portable Optical Profilometer for non-destructive 3D surface measurements directly on the component. Due to its portability, the MicroSpy Mobile is ideally suited for mobile use on large machines, vehicles, rollers, glass panes, or other large components. This enables high-resolution and non-destructive measurements on-site to determine important characteristics of surfaces, such as roughness, contour, topography, layer thickness, wear, load-bearing capacity, or volume. Smaller samples can be measured directly on the measuring table. Usable on large construction and machine parts Excellent resolution values Excellent reproducibility Non-destructive measurement Handles and adjustable support feet Low weight (approx. 5 kg) FRT Technical Specifications: Device: MicroSpy Mobile xy-travel range: 50 x 50 mm² xy-table Type: compact XY cross table with open frame Bearing: mechanical crossed roller guide Drive: DC motor with ball screw Travel range (XY measuring range): 50 x 50 mm² (or 20 x 20 mm² with CWL 3mm) Position measuring system: rotary encoder Measuring system resolution: 0.25 µm XY repeatability: < ± 1 µm Table height deviation (per axis): < 2 µm / 50 mm (of which is not reproducible): < 0.5 µm XY squareness: < 4 µm / 50 mm z-axis, motorized: Type Position Drive Travel range Position measuring system Measuring system resolution Axis straightness Gross adjustment, manual: Type: dovetail guide with fine drive Adjustment range: 25 mm Measurement: Minimum point spacing xy: 1 µm Sample size: - Sample weight: - Min. measuring speed: 1 µm / sec Max. measuring speed: 50 mm / sec Overall system: Total weight: approx. 150 kg of which measuring unit: approx. 5 kg Footprint measuring unit: approx. 0.3 x 0.3 m² Dimensions controller (W x D x H): approx. 0.65 x 0.65 x 1.0 (1.6) m³ Voltage supply EU version: 110 - 240V, 50 - 60Hz, z 16A Voltage supply US version: 110 - 240V, 50 - 60Hz, z 16A Power consumption: typ. 300-400 W Compressed air supply: - Ambient temperature: 22°C ± 5°C Temperature stability: < 0.5°C/h Environmental conditions: measuring room Scope of delivery: 1 x XY table with 50 x 50 mm² travel range 1 x Mobile base with electronics 1 x Chromatic sensor FRT CWL 600 µm 1 x Electronics for chromatic sensor 2 x Keys for computer 2 x Keys for rear door 1 x Power cord for power supply 1 x Mouse (PS/2) 1 x Keyboard 1 x 19'' TFT monitor Type: FRT MicroSpy Mobile Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: excellent (used), mileage: 660,000 km, power: 375 kW (509.86 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,000 mm, fuel: diesel, brakes: retarder, color: yellow, driver cabin: sleeper cab, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,870 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,500 kg, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, retarder, trailer coupling, = Additional Options and Accessories = - Adaptive Cruise Control - Alarm System - Aluminum Fuel Tank - Heated Mirrors - Brake Booster - High Beam Lights - Refrigerator - Air Suspension - Air-Suspended Seats - Radio/CD Player - Rotating Beacon - Sunroof - Sun Visor - Auxiliary Heater - Toolbox - Central Lubrication System - Towing Hitch = Notes = 8x4 semi-trailer tractor unit Euro 5 Retarder Crane: Effer 1355/8S + 6S Fly-Jib 8-stage hydraulic extension Fly-Jib with 6-stage hydraulic extension Total working height approx. 37 meters Remote control Hydraulic winch CroSStab outrigger system Adjustable fifth wheel coupling Wheelbase 4.60 m Dutch vehicle Main inspection (APK) valid until 30.03.2027 In very good condition! Immediately ready for use 2 units in stock = Additional Information = General Information Year of construction: 2011 Bwsdpfx Ao Aghizeiwsw License plate: BZ-DJ-13 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, 16 gears, manual transmission Axle Configuration Front axle: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 2: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 3: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Weights Unladen weight: 29,725 kg Payload: 7,275 kg GVW: 37,000 kg Maintenance, History and Condition APK (Technical Inspection): valid until 03/2027 Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: excellent (used), mileage: 620,000 km, power: 375 kW (509.86 HP), first registration: 03/2011, fuel type: diesel, axle configuration: 8x4, wheelbase: 6,000 mm, fuel: diesel, brakes: retarder, gearing type: mechanical, number of gears: 16, emission class: euro5, suspension: other, number of seats: 2, total length: 8,870 mm, total width: 2,550 mm, permissible axle load (axle 1): 9,000 kg, permissible axle load (axle 2): 9,000 kg, permissible axle load (axle 3): 9,500 kg, Equipment: air conditioning, central locking, cruise control, electric window regulation, fog lights, parking heater, retarder, trailer coupling, = Additional Options and Accessories = - Alarm system - Aluminum fuel tank - Heated mirrors - High beam headlights - Refrigerator - Air suspension - Air-suspended seats - Radio/CD player - Rotating beacon - Sunroof - Sun visor - Auxiliary heater - Toolbox - Central lubrication system - Tow hitch = Notes = 8x4 semi-trailer tractor Euro 5 Retarder Crane: Effer 1355/8S + 6S Fly-Jib 8-stage hydraulic extension Fly-Jib with 6-stage hydraulic extension Total working height approx. 37 meters Remote control Hydraulic winch CroSStab outrigger system Adjustable fifth-wheel coupling Wheelbase 4.60 m Dutch vehicle Main inspection (APK) valid until 29.03.2027 In very good condition! Immediately ready for use 2 units in stock = Additional Information = General Information Year of construction: 2011 Registration number: BZ-DJ-12 Technical Information Number of cylinders: 6 Engine displacement: 12,902 cc Transmission Transmission: ZF, 16 gears, manual transmission Axle Configuration Front axle: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 1: Max. axle load: 9000 kg; Suspension: Leaf spring suspension Rear axle 2: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Rear axle 3: Max. axle load: 9500 kg; Reduction: External planetary axles; Suspension: Air suspension Weights Bsdj Agntpjpfx Aiweww Unladen weight: 29,725 kg Payload: 7,275 kg GVW: 37,000 kg Functional CE marking: yes Maintenance, History, and Condition APK (Technical Main Inspection): valid until 03.2027 Technical condition: very good Optical condition: very good Financial Information Price: On request

Condition: used, BOSCH Type 1 PCPNL 486 A Panel 1070080135-105 Control Panel AC 230V/115V/0.4A/0.8A Item condition: Used _RD Bsdpfopufqhex Aiweww

Condition: used, For inquiries regarding the attachment, please contact Mr. Herden (available by phone at [phone number]). Seppi M. MINI-BMS 105 / 5-10 tons / Forestry Mulcher / CUT CONTROL / DEMO unit / Year of manufacture: 2023 / In stock & immediately available Price: €14,090.00 net / €16,767.10 gross - Working width: 1.05 m - Overall width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests and other hard-to-reach areas - Mulches bushes and shrubs up to 10 cm in diameter - For excavators from 5-10 tons - For mounting on various attachment plates - Drive designed for hydraulic motor, depending on the flow rate of the carrier machine - Indirect V-belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Forged counter-blades - Hydraulically adjustable hood - Continuous hinge over the entire hood length - Front protection with chains - Rear protection with chains - Support skids, height-adjustable, reinforced with a carbide plate - Color: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide pads) 21 pieces, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29-58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 - 58 - Required hydraulic pressure in bar (min-max): 150 - 250 - Required hydraulic flow rate in l/min (min-max): 60 - 130 Intermediate adapter for BE314 Z1 - Approx. 200 mm high Optional: MS08 adapter plate incl. screws and mounting = €1,410.00 net We have many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) in stock and immediately available. Bjdpsyltv Uofx Aiweww For the drive, a self-contained hydraulic system is recommended. 3 hydraulic lines are required: supply, return and drain. An additional double-acting hydraulic connection is required for the hydraulic hood. The unit is supplied without hoses, connections and attachment plate. Upon request, we will also provide you with a financing offer. We are an official Westtech sales and service partner. We are an official Gierking GMT sales and service partner. We are an official OilQuick sales and service partner. We are an official Weber MT sales and service partner. We are an official Holp sales and service partner. We are an official DMS sales and service partner. We are an official Seppi M. sales and service partner. We are an official Magni telescopic loader sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply you with the complete Seppi M. program! Errors and prior sale excepted! Internal No.: 170048 Year of manufacture: 2023 Please contact Marius Herden for further information.

Condition: used, mileage: 1,361,000 km, power: 250 kW (339.91 HP), first registration: 10/2008, fuel type: diesel, overall weight: 28,000 kg, axle configuration: 3 axles, color: orange, gearing type: automatic, emission class: euro5, Year of construction: 2008, Equipment: ABS, air conditioning, crane, parking heater, Information in English: DAF FTS XF105.460 SSC EURO 5 6X2 FASSI F330D.25 33 TON/METER CRANE REMOTE First registration: 10-20 Valid inspection: Mileage: 1,361,000 km Chassis number: XLRTS48M0E828432 Engine power: 340 kW (460 HP) Transmission: Automatic Wheelbase: 510 cm (axle 1 to axle 3) 370 cm (axle 1 to axle 2) Own weight: 14,930 kg GVW: 28,000 kg Colour: Orange Suspension: Front leaf spring, rear air suspension Emission class: Euro 5 Configuration: 6X2 Tyres axle 1: 385/65 L90% R90% Tyres axle 2: 315/70 L30% R30% Tyres axle 3: 315/70 L50% R50% 5th wheel height: 122 cm Cab type: Super Space Cab Extras: MX Engine Brake, Air conditioning, Parking heater, Refrigerator, Cruise control, Spoiler, 620-liter aluminum tank (Original DAF), 27MC, Toll system preparation, Complete service history at DAF, Gearbox completely overhauled at 1,300,000 km, Original Dutch truck, Fassi F330 D.25 33 ton/meter crane, 5x hydraulic extendable. Crane: Fassi F330 D.25 33 ton/meter crane, 5x hydraulic extendable. Serial number: 6544. Remote control, Complete with crane book. Load capacity: 2.20 m => 11,500 kg 2.85 m => 9,500 kg 4.60 m => 6,510 kg 6.45 m => 4,445 kg 8.40 m => 3,265 kg 10.4 m => 2,540 kg 12.4 m => 2.5 kg 14.6 m => 1,715 kg Further information: * Maximum axle load | Second axle: 11,500 kg * Payload: 13,070 kg * Width: 2500 mm * Tire tread depth outer left | Second axle: 30% * Tire tread depth inner left | Second axle: 30% * Tire tread depth outer right | Second axle: 30% * Tire tread depth inner right | Second axle: 30% * Tire tread depth outer left | Third axle: 30% * Tire tread depth inner left | Third axle: 30% * Tire tread depth outer right | Third axle: 30% * Tire tread depth inner right | Third axle: 30% * Tire size | Second axle: 315/70 R22.5 * Tire size | Third axle: 315/70 R22.5 * Tire size | First axle: 385/65 R22.5 * Tire tread depth inner left | First axle: 50% * Tire tread depth inner right | First axle: 50% * Wheelbase: 510 cm * Maximum axle load | Third axle: 7,500 kg * Length: 7700 mm * Maximum axle load | First axle: 9,000 kg * Cab: Yes * Position | First axle: Front * Brake type | First axle: Disc brakes * Suspension | First axle: Parabolic springs * Position | Second axle: Rear * Position | Third axle: Rear * Brake type | Second axle: Disc brakes * Brake type | Third axle: Disc brakes * Suspension | Second axle: Air suspension * Suspension | Third axle: Air suspension * Reduction | Second axle: Single reduction * Lift axle | Third axle: Yes * Twin tires | Second axle: Yes * Twin tires | Third axle: Yes * Driven | Second axle: Yes * Differential lock | Second axle: Yes Further equipment: * 9-ton front axle * Aluminum fuel tank * Anti-lock braking system (ABS) * Traction control * Automatic transmission * Heated mirrors * Differential lock * Electric windows * Electrically adjustable exterior mirrors * Electronic Braking System (EBS) * Speed limiter * Speed control system * Air conditioning * Refrigerator * Power steering * Air suspension * Parabolic suspension * PTO * Radio/CD player * Disc brakes * Sleeper cab * SemCollection * SemStars * Auxiliary heater * Central lubrication * Central locking Semtrade B.V. Bodpfx Ajz Ivgqsiweww Contact | Martin Klaaijsen | Tel: | Whatsapp: | Email: sales@semtrade.

Year of construction: 2017, condition: ready for operation (used), X-axis: 550mm, y-axis: 305mm, z-axis: 460mm, milling table dimensions: 800x320mm, T slots: 14mm/3 pieces/distance 100mm, max. table load: 300kg, spindle to table distance: 100-600mm, number of tool positions: 12, max. tool diameter: 70mm, max. tool length: 300mm, max. tool weight: 6kg, tool change time (T to T): 7s, milling spindle power S1 operation: 5.5kW, power S6 30% operation: 7.8kW, torque S1 operation: 35Nm, torque S6 30% operation: 50Nm, spindle holder: ISO 40/BT40x45°, coolant system pump output: 650W, tank capacity: 120l, compressed air minimum connection pressure: 0.6MPa (6bar), air consumption: 0.1-0.15m³/h at 0.6MPa, compressed air quality: ISO 8573.1 class 2, compressed air connection: 3/8 inch, connected load: 12.5kVA, control: Siemens SINUMERIK 808D MILLING, length: 2164mm, front width: 1520mm, side width: 1860mm, height: 2200mm, door opening range: 760mm, door opening width: 1055mm, foundation/installation area: 1520x2080mm, weight: 2.8t. An on site inspection is possible. Bodpfx Aozcfk Eeiwsww

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, travel distance X-axis: 1,600 mm, travel distance Y-axis: 2,200 mm, travel distance Z-axis: 900 mm, spindle speed (max.): 18,000 rpm, spindle nose: hsk 63, spindle motor power: 32,000 W, Longitudinal travel of the X-axis table: 1,600 mm Transverse travel of the Y-axis ram: 2,200 mm Vertical travel of the Z-axis head: 900 mm Head tilt travel (A-axis): ±105° Table rotation travel (C-axis): 360° Table size: 1,200 x 1,200 mm Table load capacity: 3,000 kg Distance between columns: 1,550 mm Maximum spindle power: 32 kW at 2,000 rpm Maximum spindle torque: 103 Nm Maximum spindle speed: 18,000 rpm Spindle mounting: HSK63A Linear axis travel speeds (X-Y-Z): 45 m/s Acceleration of X-Y-Z axes: 4.5 m/s² Tool magazine with 60 positions External coolant supply for the tool, 4 bar Bodpfx Aijz Ib U Hewoww Spray mist coolant No. 2 screw conveyors + No. 1 transverse conveyor FIDIA C10 numerical control Full enclosure CE standards

Condition: used, Year of construction: 2017, power: 55 kW (74.78 HP), pressure (max.): 8.5 bar, ambient temperature (min.): -10 °C, ambient temperature (max.): 45 °C, We offer this used Kaeser CSD 105 screw compressor, manufactured in 2017. Compressor type: CSD 105 Material number: CSD.4C Serial number: 1328 Year of manufacture: 2017 Rated power: 55.0 kW Motor speed: 2975 rpm Maximum working pressure: 8.5 bar Ambient temperature range: -10°C to 45°C Option: K1 C3 Bedpfxjzrgmxs Aiweww 11,000 operating hours If you have any further questions or require more information, please send us a message or call us. We also have used BS51 and BS61 compressors, a TD61 dryer, and a 2000L pressure vessel in stock. Prices are negotiable. You can also purchase a complete set of machines at a favorable price. The machines are used and do not come with a warranty.

Condition: good (used), Year of construction: 1998, Ref. -No.: 10671 Manufacturer: TOS VARNSDORF Type: WH 105 CNC Year of construction: 1998 Type of control: CNC Control: Heidenhain TNC 426 PB Storage location: Halberstadt Country of origin: Czech Republic Bwsdpo Ahky Njfx Aiwsw Further information: The machine is currently in active production and can be inspected under power and in operation by prior arrangement

Condition: used, Year of construction: 2023, operating hours: 119 h, functionality: fully functional, This Kärcher KM 105/110 R Bp package, manufactured in 2023, has only accumulated 119 operating hours to date. The patented sweeping brush side broom enables corner cleaning in a single pass. For easy emptying of the coarse dirt container, the machine features a hydraulic high-dump system, which can be fully operated from the driver's seat. The Teach system automatically adjusts the main sweeping roller as it wears, guaranteeing consistently excellent sweeping results. Three different contact pressures can be selected, depending on the surface and type of dirt. Thanks to the position of the main sweeping roller between the rear wheels, higher obstacles can be traversed without damaging the sweeping system. The patented, fully automatic Tact filter cleaning system ensures dust-free operation at all times. Technical data: Maximum area performance: 6300 m²/h Bedpfx Aij Ahhkkoweww Working width: 640 mm Working width with 1 side broom: 1050 mm Sweeping debris container: 110 l

Year of construction: 2002, condition: good (used), Pallet wrapping machine, Robopac – used - : Bwjdpfx Aisy Ndhqswew Price per unit ex site: only €2,500 (net), including loading! Manufacturer: Robopac Model: Rotoplat 105/FRD Year of manufacture: 9/2002 Own weight: approx. 380 kg 230V, 50Hz, 5.0 A, 1.4 kW Condition: good Available: immediately Location: 26209 Hatten

Condition: used, Year of construction: 2017, Milling machine Optimium Optimil F 105 Bsdoyphnyopfx Aiweww

Condition: new, Year of construction: 2026, SJSZ 51/105 Conical Twin-Screw Extruder Industrial Twin-Screw Extruder for PVC Processing The SJSZ 51/105 conical twin-screw extruder is designed for continuous processing of PVC materials and the production of rigid PVC profiles, pipes and other extruded products. The extruder features a bimetallic screw and barrel assembly made of nitrided 38CrMoAlA steel, providing high wear resistance and stable extrusion performance. The machine is equipped with a 22 kW three-phase asynchronous motor with forced cooling, a DELTA variable frequency drive, OMRON temperature controllers, and Schneider electrical components. The extruder includes an automatic material feeding system, vacuum degassing, air-cooled barrel heating zones, and an electrical control cabinet. 1. General Technical Specifications • Model: SJSZ 51/105 • Type: Conical twin-screw extruder • Processing Material: PVC Bedpfx Aijz Nmfbjweww • Production Capacity: 50–120 kg/h, depending on material and operating conditions • Main Motor Power: 22 kW • Motor Type: Three-phase asynchronous motor with forced cooling • Motor Speed Control: DELTA frequency inverter • Power Supply: 380 V, 3-phase, 50 Hz 2. Screw & Barrel • Screw Diameter: 51/105 mm • Screw Length: 1085 mm • Screw Speed: 1–34.8 rpm • Screw & Barrel Material: 38CrMoAlA, nitrided • Screw & Barrel Design: Bimetallic • Nitriding Depth: 0.4–0.7 mm • Nitriding Hardness: ≥940 HV • Surface Roughness: Ra 0.4 μm • Bimetallic Layer Hardness: HRC 55–62 3. Heating & Cooling System • Barrel Heating Power: 12 kW 4 zones • Heating Zones: 10 • Heating Elements: Cast aluminum heaters • Barrel Cooling: Forced air cooling 3 zones • Temperature Controllers: OMRON 4. Gearbox • Gear & Shaft Material: High-strength alloy steel • Gear Treatment: Carburized, quenched and ground • Gear Hardness: HRC 54–62 • Gear Precision: Grade 6 • Screw Protection: Automatic screw displacement alarm 5. Feeding & Vacuum Degassing • Feeding Motor Power: 0.75 kW • Feeding Speed Control: DELTA frequency inverter • Feeding Operation: Independent or synchronized with extrusion • Vacuum Degassing Pump: 2.2 kW 6. Control & Electrical Components • Main Motor: 22 kW • Motor Cooling: Forced cooling • Main Frequency Inverter: DELTA • Temperature Controllers: OMRON • AC Contactors: Schneider • Electrical Control Cabinet: Included

Condition: ready for operation (used), Year of construction: 2017, spindle speed (max.): 425 rpm, travel distance X-axis: 400 mm, travel distance Z-axis: 3,000 mm, spindle motor power: 17,000 W, total height: 2,230 mm, total width: 1,800 mm, overall weight: 6,460 kg, controller manufacturer: FAGOR, product length (max.): 5,530 mm, number of axes: 2, This Pinacho STH 400-105×3000 was manufactured in 2017. A robust horizontal turning machine with a swing over bed of 400 mm and a distance between centers of 3000 mm. Features a high-torque spindle and CNC-controlled feed for precise heavy-duty turning. Ideal for machining shafts, pipes, and flanges. Consider the opportunity to buy this Pinacho STH 400-105×3000 horizontal turning machine. Contact us for more information. • Max. swing over bed: approx. 400 mm • Max. turning diameter: approx. 400 mm • Distance between centers: 3,000 mm • Bar capacity: approx. 105 mm • Spindle • Main spindle: horizontal • Spindle bore: 105 mm • Spindle nose: A2-type (depending on configuration) • Speed range: variable (CNC-controlled) • High-torque spindle suitable for heavy turning • Range I: 0 - 424 rpm • Range II: 425 - 1700 rpm • Axes • X-axis: cross slide • Z-axis: longitudinal slide • CNC-controlled feed and rapid traverse • Tool system • Turret: CNC tool turret Bjdpfx Aisybbiuowoww • Number of tool stations: depending on configuration • Suitable for internal and external turning • Control system • CNC control: Fanuc / Siemens (depending on configuration) • Full CNC contouring and threading capability • Application • Medium to heavy-duty turning • For shafts, pipes, flanges, and general production parts • Suitable for series and job-shop production • A ball screw was replaced about 3 years ago • Accessories: 1 Lynette and various tool holders Technical Specification Counter Spindle No Driven Tools No

Condition: used, For inquiries regarding the attachment, Mr. Herden will be pleased to assist you (by phone). Seppi M. MINI-BMS 105 / 5–10t / Forestry Mulcher / CUT CONTROL / Demo unit / Rotary drive / Year of manufacture: 2023 / in stock & immediately available Price: €18,990.00 net / €22,598.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulcher for excavator mounting - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brush and wood up to 10 cm diameter - For excavators from 5–10 tonnes - For mounting on various interface plates - Drive designed for hydraulic motor depending on carrier unit oil flow - Indirect belt drive with 5 V-belts - Reinforced housing made of wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire length of the hood - Front guard with chains - Rear guard with chains - Reinforced, height-adjustable skid runners with hard metal base plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement (min-max): 29–58 cm³ - Required hydraulic pressure (min-max): 150–250 bar - Required hydraulic oil flow (min-max): 60–130 l/min OPT372 hydraulic 190° rotation device OPT158 12V solenoid valve for opening the rear hood Optional: MS08 adapter plate incl. bolts and installation = €880.00 net We have a wide range of adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. An autonomous hydraulic system is recommended for operation. Three hydraulic lines are required: supply, return, and drain. Bwedpfoymi Najx Aiwjw For the hydraulic hood, a double-acting hydraulic connection is also needed. The unit is supplied without hoses, connectors, and adapter plate. We are an official Seppi M. sales and service partner, as well as dealer and service partner for Westtech Woodcracker, DMS, Magni telehandlers, JCB construction machinery, Mercedes-Benz, and Iveco. With 800 used commercial vehicles in stock, we are one of the largest commercial vehicle dealers in Germany. We supply the complete range of Seppi M. equipment for you! Errors and prior sale excepted! Internal ref.: 170068 = More information = Please contact Marius Herden for more details.

Condition: used, empty load weight: 2,800 kg, maximum load weight: 7,700 kg, overall weight: 10,500 kg, axle configuration: 2 axles, first registration: 10/2002, loading space length: 4,550 mm, loading space width: 2,420 mm, loading space height: 500 mm, suspension: steel, tire size: 325/65R18, wheelbase: 990 mm, color: blue, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, steel body, ABS (anti-lock braking system), 2 axles, BPW axles, tandem, leaf spring suspension, lashing points, front support, rear support, swing-out tailgates, height-adjustable drawbar. Wheelbase: 990 mm. Body: Tandem 3-sided tipper trailer with ramp compartment, 2x BPW axles, drum brakes, height-adjustable drawbar eye! Bwodszvzguepfx Aiwjw Loading height approx. 1040 mm! The trailer is currently derated to a permissible total weight of 9900 kg! ACCESSORY INFORMATION WITHOUT GUARANTEE, subject to changes, prior sale and errors!

Condition: used, Year of construction: 2024, For inquiries regarding the attachment, Mr. Herden will be happy to assist you (by phone). Seppi M. MINI-BMS 105 / Forestry Mulcher / incl. OQ45-5 / incl. CUT CONTROL / 5-10 t / DEMO unit / in stock and immediately available / very good condition Price: €20,090.00 net / €23,907.10 gross - Working width: 1.05 m - Total width: 1.20 m - Depth: 1.03 m - Height: 0.72 m - Mulching attachment for excavators - For mulching along riverbanks, in forests, and other hard-to-reach areas - Mulches brushwood and woody material up to 10 cm Ø - For excavators from 5 to 10 tons - Suitable for mounting to various adapter plates - Drive designed for hydraulic motor, depending on the carrier's oil flow - Indirect V-belt drive with 5 V-belts - Reinforced chassis made from wear-resistant AR 400 steel - Drop-forged counter blades - Hydraulically adjustable hood - Continuous hinge along entire hood length - Front guard with chains - Rear guard with chains - Support skids, height-adjustable, reinforced with a carbide plate - Colour: red RAL3020 · anthracite RAL7021 OPT 228 – Forestry rotor with fixed MINI DUO tools (2 carbide inserts) 21 pcs, total machine weight with OPT 228*: 445 kg OPT 513 CUT CONTROL - Depth limiter for rotor with fixed tools OPT 291 VARIO FLOW Axial piston hydraulic motor with variable displacement 29–58 cm³ and overpressure valve - Displacement in cm³ (min-max): 29 – 58 - Required hydraulic pressure in bar (min-max): 150 – 250 - Required oil flow in l/min (min-max): 60 – 130 Intermediate adapter for BE314 Z1 incl. OQ45-5 adapter plate - Approx. 200 mm height We have many additional adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc.) in stock and immediately available. We stock a wide range of Seppi products, available for immediate delivery! Please contact us for more information at / . Financing options available upon request. We are official sales and service partners for: - Seppi M. - Holp - Magni telehandlers - Gierking GMT - OilQuick - Weber MT - Westtech - DMS - JCB construction machinery - Mercedes-Benz - Iveco With 800 used vehicles, we are also one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi range! Bwedpfx Ajy Rdnajiwew Errors and prior sale excepted! Internal reference number: 170051 = Further information = Please contact Marius Herden for more details.

Condition: used, mileage: 400,000 km, power: 280 kW (380.69 HP), first registration: 07/2005, fuel type: diesel, overall weight: 36,000 kg, axle configuration: > 3 axles, color: white, gearing type: mechanical, emission class: euro3, Equipment: ABS, air conditioning, crane, electronic stability program (ESP), parking heater, SCANIA 114 G 380 8 x 4 HIAB CRANE 2 x LIFT AXLE *ROLL-OFF TIPPER----VEHICLE HISTORY * VEHICLE ORIGINATES FROM THE NETHERLANDS * DELIVERY TO ALL PORTS POSSIBLE UPON REQUEST VEHICLE EQUIPMENT * MANUAL GEARBOX * RETARDER * STEERING AXLE * CRUISE CONTROL * 2 X LIFT AXLE * HIAB LOADING CRANE * TYPE: 105 Z * 7.8 M LONG * TRAILER COUPLING * ROOF SPOTLIGHTS * TOOL BOX * GVW: 36,000 KG * PAYLOAD: 15,032 KG * VERY GOOD TYRES * IMMEDIATELY OPERATIONAL FOR MORE INFORMATION: ----EXPORT DECLARATION, CUSTOMS EXW WITHIN 10 MIN. (APPROVED EXPORTER) 5 DAY, 15 DAY, 30 DAY LICENSE PLATES, AND 15 DAY AUSTRIAN PLATES EURO 1 Bwsdpsy Sq Ehefx Aiwew TECH. DATA SHEET (DATA TECNICI) RESERVATIONS FOR VEHICLES ONLY VIA EMAIL FUNCTION VERBAL RESERVATIONS ARE NOT VALID For sales to the EU and third countries, a deposit/guarantee of at least €500.00 / €1,000.00 will be levied. Subject to change, error, and prior sale! More vehicles can be found on our website. Sale only according to our General Terms and Conditions – see website Important note – Important information: Despite careful verification of all details in our offer, errors may occur. Some may be due to transmission errors in the systems of the various platform providers. Therefore, we point out that all information is provided without guarantee and does not constitute a legal claim. Legal notice: This sales advertisement does not constitute an offer in terms of §145 BGB. Rather, it is for information purposes regarding contract initiation. The information provided here is without guarantee and does not constitute warranted characteristics.

Condition: new, machine/vehicle number: 2440238, fuel type: diesel, motor manufacturer: Deutz TCD4.1L4, General information Year of manufacture: 2025 Bodpfxox Nl Dme Aiwoww Field of application: Construction Weights Empty weight: 2.960 kg Functional Generator capacity: 105 kVA Dimensions of cargo space: 364 x 120 x 229 cm CE mark: yes Other information Fuel consumption: 22.1 Liter per hour at 75% Load Generator: 105 Frequency: 50 Voltage: 400 Drill equipment: Tank, Battery, Control Panel, Steel canopy Emission level: Stage V / Tier IV final Water tank volume: 1100 l Additional information Please contact Team DPX for more information = Additional options and accessories = - Battery - Control Panel - Steel canopy - Tank

Condition: ready for operation (used), Year of construction: 2016, travel distance X-axis: 200 mm, travel distance Y-axis: 150 mm, travel distance Z-axis: 250 mm, controller manufacturer: EMCO, total height: 1,100 mm, table load: 10 kg, overall weight: 400 kg, spindle speed (max.): 5,000 rpm, spindle motor power: 1,100 W, tool weight: 700 g, product length (max.): 1,135 mm, number of axes: 3, This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details. • Distance spindle nose to table: 95–245 mm Bwsdpfx Aieyhcfkswew • Table size: 420 × 125 mm • T-slots: 2 × 11 × 90 mm • Max spindle torque: 4.2 Nm • Rapid traverse (X/Y/Z): 5 m/min • Feed rate: 0–5 m/min • Max feed force X/Y: 2000 N • Max feed force Z: 2400 N • Positioning accuracy (X/Y/Z): 0.005 mm • Repeatability: 0.005 mm • Tool stations: 10 • Max tool diameter: 55 mm • Max tool length: 50 mm • Tool change time (T1–T2–T3): 9.7 / 5 / 7.5 s • Connected load: 1.4 kW • Required air pressure: 6 bar

Condition: new, working width: 105,000 mm, Seppi M. H3 105 flail mower / DEMO unit / Year of manufacture: 2023 / including MS03 adapter plate / in stock & immediately available Price: €10,790.00 net / €12,840.10 gross - Working width: 105 cm - Overall width: 117 cm - Depth: 80 cm - Height: 66 cm - Weight: 217 kg - Mulching head for mounting on a hydraulic arm - mulches grass and shrubs up to 3 cm in diameter - for excavators from 2 to 5 tons - for mounting on various adapter plates - floating mounting (parallelogram linkage) - indirect V-belt drive with 3 V-belts - drive designed for hydraulic motor depending on the flow rate of the carrier machine - housing made of wear-resistant AR400 steel - front protection with chains - rear protection made of rubber - reinforced support roller with double tapered roller bearing, height-adjustable - Color: red RAL3020 · anthracite RAL7021 OPT 039 Rotor with SMW flail (standard) - 9 pieces, part number 150.02.041 OPT 429 Hydraulic gear motor 17cm³ - with flow control valve and motor safety valve DRAIN SAFE TM, which protects the motor in case of incorrect use - required hydraulic pressure in bar (min-max): 150 - 250 - required hydraulic flow rate in l/min (min-max): 35 - 60 OPT 529 DRAINLESS system with pressure accumulator (NO leak oil line required!!) - including hoses and check valve OPT 372 hydraulic 190° swivel device 2 hydraulic lines are required: supply and return. No leak oil! In addition, a hydraulic circuit for the swivel ring is required. The unit is supplied without hoses and connections. Many other adapter plates (MS01 / MS03 / MS08 / CW05 / CW10 / CW20 / OQ65 / OQ70/55 / etc...) are in stock and immediately available. We have a very large selection of various Seppi M. products in our warehouse that are immediately available! Please contact us for this at . If you wish, we will also be happy to provide you with a financing offer. We are an official Seppi M. sales and service partner. We are an official Magni telehandler sales and service partner. We are an official DMS sales and service partner. We are an official Westtech sales and service partner. We are an official JCB construction machinery sales and service partner. We are an official Mercedes-Benz sales and service partner. We are an official Iveco sales and service partner. We are an official Holp sales and service partner. We are an official OilQuick sales and service partner. In addition, with 800 used vehicles, we are one of the largest commercial vehicle dealers in Germany. We supply the complete Seppi M. range for you! Errors and prior sale excepted! = More information = Year of manufacture: 2023 Please contact Marius Herden for more information. Bodpfx Aieznrp Dsweww

Condition: ready for operation (used), Year of construction: 1986, screw diameter: 105 mm, Single screw extruder manufactured in 1986. This PREALPINA Prealpina 105 × 30D features a screw diameter of 105 mm and an output capacity of up to 300 kg/h. It is designed for processing various post-consumer plastics, including PE and PP. The machine includes essential components such as a gravimetric dosing. If you are looking to get high-quality plastic recycling capabilities, consider the PREALPINA Prealpina 105 machine we have for sale. Contact us for further details. • Machine Type: Plastic Recycling Extrusion Line • Screw Diameter: 105 mm • L/D Ratio: 30:1 • Extruder Type: Single Screw Extruder • Material Processed: PE, PP, LDPE, HDPE (Post-consumer plastics) • Output Capacity: Up to 300 kg/h • Installed Power: 255 kW • Power Supply: 3 × 400 V + N + PE • Main Drive: Faurndau (renewed in 2021) • Degassing: Single Degassing • Barrel: Bi-metal Barrel C60/R121 • Screw Design: Ø105 mm with spiral shear and rhombic mixing section, RC3 hard-faced flights • Material Feeding System: Screw Feeding from Silo • Feeding Equipment: Feeding Screws, Elevator, Gravimetric Dosing Units, Stuffing Unit • Hopper Type: Gravity Hopper • Screen Changer / Melt Filter: Ettlinger ERF 250 (Laser-Perforated Continuous Filter) • Pelletizing System: ECON EUP 600 Underwater Pelletizing System • Machine Condition: Good Working Condition • Availability: Immediately Available, Decommissioned / Dismantled • Spare Parts Pack: New Screws and Cylinder Sets • Melt filter and underwater granulation system have already been dismantled Bwedpjzht H Rofx Aiwew Optional • Masterbatch Dosing • Water Bath • Water Pump • Heat Exchanger • Centrifuge • Extraction Blower • Cyclone • Vacuum Pump • Spare Parts Pack: New Screws and Cylinder Sets • Big Bag Loading Station

Condition: used, mileage: 633,842 km, power: 353 kW (479.95 HP), first registration: 06/2008, fuel type: diesel, tire size: 385/55R22.5, axle configuration: 8x2, wheelbase: 4,100 mm, fuel: diesel, brakes: engine braking, color: red, driver cabin: sleeper cab, gearing type: semi-automatic, emission class: euro4, suspension: other, total length: 8,000 mm, total width: 2,550 mm, Equipment: ABS, air conditioning, central locking, cruise control, differential lock, electric window regulation, parking heater, traction control, = Additional Options and Accessories = - Remote-controlled central locking - Lift axle - PTO - Radio Bjdpfx Asyy Ra Usiwjww - Disc brakes - Sun visor - Auxiliary heater - Toolbox = Notes = Hiab 1055 E-8 HIPRO 6 x outriggers. 8 x hydraulic extension. 1 x manual extension. = Further Information = Technical Information Number of cylinders: 6 Axle Configuration Brakes: Disc brakes Front axle 1: Tire size: 385/55R22.5; Steerable; Tire tread left: 50%; Tire tread right: 50%; Suspension: Leaf spring suspension Front axle 2: Tire size: 385/55R22.5; Steerable; Tire tread left: 60%; Tire tread right: 60%; Suspension: Leaf spring suspension Rear axle 1: Tire size: 315/60R22.5; Dual tires; Tire tread left inner: 80%; Tire tread left outer: 80%; Tire tread right inner: 80%; Tire tread right outer: 80%; Suspension: Air suspension Rear axle 2: Tire size: 315/60R22.5; Dual tires; Tire tread left inner: 70%; Tire tread left outer: 70%; Tire tread right inner: 70%; Tire tread right outer: 70%; Suspension: Leaf spring suspension Weights Unladen weight: 23,680 kg Payload: 13,320 kg GVW: 37,000 kg Functional Crane: Hiab Identification Model number: R480 8x2 / HIAB 105 tm CRANE / K = Company Information = ALL PRICES ARE NET FOR EXPORT, Joris Versteijnen (NL-DE-GB), Wouter Greutink (NL-DE-GB-ES-IT), Govorim po ryccki. We make every effort to provide accurate information. However, no rights can be derived from the published texts.

Condition: ready for operation (used), Heidenhain UV 105 ID: 344 980-02 SN: 11803610A – complete overhaul and testing performed professionally, including test report, with a 3-month warranty. 100% functional. Scope of delivery as shown in the photos. Bjdsz R Ii Dopfx Aiweww