Used Brake System for sale (18,035)

Condition: ready for operation (used), controller manufacturer: TS3, installation height: 515 mm, operating speed: 20 mm/s, reverse speed: 90 mm/s, total length: 3,400 mm, total width: 1,850 mm, total height: 2,820 mm, power: 9 kW (12.24 HP), travel distance Z-axis: 265 mm, empty load weight: 5,000 kg, passage width: 2,550 mm, upper lower Wila tooling 5 axes: X / X' / R / Z1 / Z2 Lhodpfxjx Imkfe Ah Uor Capacity: 50 ton x 2550 mm Backgauge: CNC Locking speed: 90 mm/sec

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, control type: CNC control, actuation type: electric, controller manufacturer: Safan, controller model: TS1, bending force (max.): 80 t, working width: 2,550 mm, stroke length: 290 mm, throat depth: 1,000 mm, distance between stands: 2,700 mm, installation height: 1,050 mm, operating speed: 90 mm/s, table height: 950 mm, back gauge travel distance R-axis: 150 mm, back gauge travel distance Z-axis: 1,000 mm, overall weight: 6,800 kg, total length: 3,450 mm, total width: 1,820 mm, total height: 2,510 mm, input voltage: 400 V, warranty duration: 3 months, pressing force: 80 t, Equipment: documentation/manual, emergency stop, foot remote control, safety light barrier, SAFAN E-Brake Press Brakes are a series of machines equipped with electric drives. Lenze servo motors, controlled by inverters from the same manufacturer, enable fast and reliable system performance over many operating hours. Additionally, the machine only consumes electrical energy during the downward stroke of the ram. The upward movement of the ram is achieved by the force of springs. During standby, the energy consumption is minimal, as there is no hydraulic pump motor maintaining pressure, unlike hydraulic press brakes. Power consumption is estimated to be up to 70% lower than with conventional hydraulic press brakes. SAFAN E-Brake Servo-Electric Press Brake Force: 800 kN (80 tons) CNC Controlled Axes: Y1-Y2-X-R-Z1-Z2 Ram Stroke: 290 mm Open Height (Daylight): 590 mm Upper Beam Approach Speed: 90 mm/s Upper Beam Accuracy: +/- 0.01 mm Maximum Backgauge Finger Speed: 350 mm/s Maximum Backgauge Range (third reference point, X-axis): 1000 mm Hydraulic Upper Tool Clamping: WILA Connected Load: 11 kW Machine Weight: 6,350 kg Lhodpfx Ahsut S E Nj Usr Machine Width: 3,450 mm Machine Depth: 1,820 mm Machine Height: 2,510 mm Power Supply: 3/N/PE 50Hz – 400/230V Servo-electric drive (no hydraulic system) Drive transmission via belts

Condition: new, functionality: fully functional, Year of construction: 2025, bending force (max.): 1,000 t, stroke length: 200 mm, operating speed: 50 mm/s, reverse speed: 180 mm/s, overall weight: 8,000 kg, total length: 3,915 mm, total width: 1,605 mm, total height: 2,655 mm, input voltage: 380 V, input frequency: 50 Hz, warranty duration: 24 months, bending angle (max.): 90 °, table length: 3,200 mm, working height: 450 mm, All-Electric Servo Bending Machine Nominal force(KN): 1000 Slider stroke(mm): 200 Throat depth (mm): 360 X-axistravel(mm): 600 R-axistravel(mm): 200 Z-axistravel(mm): 2500 🔹 Smart CNC System – SL100-P with high-end algorithms and 12-inch touchscreen for intuitive operation. 🔹 High-Precision Structure – Finite element analysis (FEA), annealed, and one-time machining for long-term stability and accuracy. 🔹 4-Axis Intelligent Backgauge – AC servo-driven, high-speed positioning with automatic collision avoidance. 🔹 Precision Compensation System – Adjustable convex strips & fine-tuning mechanism for optimal bending accuracy. 🔹 Powerful & Durable Drive – High-torque servo motor, heavy-duty ball screws & sealed protection for longevity. Lhjdpfx Ahsv Hchls Uor 🔹 Fully Closed-Loop Control – Y1/Y2 magnetic scale feedback, positioning accuracy ±5μm. 🔹 Optimized Electrical System – Closed electrical box, heat dissipation, & neat wiring for reliability and easy maintenance. 🔹 Imported Precision Components – Ball screws & linear guides ensure accuracy without stroke compensation. 🔹 High precision, stability, and smart automation – designed for professional sheet metal bending!

Condition: repair required (used), Manufacturer: Amada Type: 5020 Year of construction: 1990, Number of axles: 3 Pressing force: 50t Bending length: 2000mm Sold without prisms, The machine works, moves, Error: End position of the Y-axis must be repaired. Lhsdpfxev Umm Ij Ah Ujr Height adjustment is missing,

Condition: reconditioned (used), 1 x Elektronic Motor Braking Unit EMG15 Power range 3 - 15KW Voltage range 200-575V Lhjdpfx Ahsxc D Uuo Usr Power frequency 50Hz/60Hz Siemens EMG 15 Motor brake for Weinig machine Unimat and Hydromat series Working tested on Weinig machine

Condition: excellent (used), functionality: fully functional, Year of construction: 2000, control type: CNC control, controller manufacturer: Delem, bending force (max.): 50 t, working width: 1,500 mm, stroke length: 215 mm, number of axes: 4, Equipment: CE marking, foot remote control, Used Trumpf Trumabend V 50 Hydraulic cnc 50ton x 1.5metre Press Brake For Sale Brand: Trumpf Type/Model: Trumabend V 50 Year:2000 Trumabend V 50 Lodjx Nip Hepfx Ah Uehr Technical details Capacity: 50ton x 1.5metre: Folding length: 1500 mm CNC Brand: Delem Total axis: 4 Y1, Y2, X and R Axis

Condition: not inspected (used), Amada Astro 100 NT, HSD 1030 AVAILABLE FOR SPARES Lsdpfx Aowa Siqjh Uehr

Condition: excellent (used), functionality: fully functional, Year of construction: 2007, Type APHS 3108 x 150 Capacity 150ton year 2007 Bending length 3100mm Max Stroke 260mm Machine weight 10,000kgs Top tool weight 60kg Bottom tool weight 100kg Max stopping time 80ms Lhjdpsx Au Dtsfx Ah Usr

Condition: good (used), functionality: fully functional, Year of construction: 2005, Used 2-meter CNC press brake from Trumpf Model: V85 Capacity: 2050 x 85 tons Delem CNC control CNC-controlled Y1, Y2, X, and R axes Wila hydraulic upper clamping Lhodpfxox I N Awj Ah Uor Year of manufacture: 2005 Without tools

Condition: excellent (used), Year of construction: 2001, AMADA MODEL HFE 103L LONG STROKE 100 tons capacity x 3000 bending length hydraulic downstroking press brake complete with OP 2000 7 AXIS cnc control, machine mounted electronic guards , side and rear interlocked fencing Model Amada HFE 1O3 L downstroke CNC Press brake Year 2001 Tonnage 1000 KN Type OP 2000 CNC Controlled Axis Y1, Y2, X, R Max. Bend Length 3000 mm Open height 620 mm Stroke Length 350 mm Approach Speed 100 mm/sec Bending Speed 1 - 10 mm/sec Lodpfxju Iukfs Ah Uohr Return Speed 1-100 mm/sec Oil Capacity Motor Power 7.5kw Weight 7600 kg Bed Length 3000 mm Bed Width 60 mm Open Height 470 mm Throat Depth 420 mm CNC Control Max gauge 1000mm R axis 250mm can be demonstrated under power BROCHURE AND FURTHER INFORATION AVAILABLE UPON REQUEST

Condition: good (used), first registration: 10/1995, wheelbase: 7,010 mm, suspension: air, total length: 9,550 mm, total width: 2,500 mm, Year of construction: 1995, Equipment: ABS, Axle configuration Brakes: Drum brakes Suspension: Air suspension Rear axle 1: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 2: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Rear axle 3: Max. axle load: 9,000 kg; Tire tread left: 30%; Tire tread right: 30% Weights Unladen weight: 9,200 kg Payload: 34,800 kg Gross vehicle weight: 44,000 kg Functionality Ljdpfox Nykzjx Ah Ushr Tipper: Rear Maintenance, history and condition APK (periodic technical inspection): valid until 04/2026 Technical condition: good Visual condition: good Further information Contact Andre, Henri or Andre for more information.

Condition: good (used), Year of construction: 2001, 3-Axis CNC Press Brake with HACO-Robosoft ATS 590 Graphic Control Manufacturer: HACO, Origin Belgium Model: ERMS 40135 Year of manufacture: 2001 / retrofit in 2008 with ATS 590 Ljdpfxox Npiys Ah Uohr Technical data: Press force: 135 t Bending length: 4000 mm Features / Accessories: • 3-axis CNC control HACO ATS 590 Graphic (Y, X, and R axes for stroke depth and back gauge forward/backward + up/down) • Back gauge fingers adjustable together/apart manually • Manual table crowning by handwheel beneath the die with SIKO digital counter; also adjustable in the tool cassettes via wedge Delivery time: 21.01.2026 ex location D-32425 Minden, loaded free on truck Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE - 44143 Dortmund - Wambel

Condition: good (used), Pneumatic clutch-brake combination Ledob A Na Hopfx Ah Uohr -pneumatically operated -with brake exit side -Shafts: Ø 35 mm -Number: several couplings available Price: per piece -Dimensions: 460/220/H325 mm -Weight: 50 kg/piece

Condition: used, functionality: fully functional, Year of construction: 2007, Specification Tonnage 100 Tons Bending Length 3000mm Year of Manufacture 2007 Complete with: Cybelec DNC 60 CNC Control Lasersafe guarding Top Tool 88 Degree Standard Gooseneck Bottom Tool 4 way Multi Vee Die Ljdpfx Ahsxx T Nao Uohr

Condition: good (used), functionality: fully functional, Year of construction: 1990, Used 3 meter CNC press brake by Safan Lhsdpjx I Nzyjfx Ah Uer Model: DNCS 110 3100 Capacity: 3100 x 110 tons CNC controlled axes: Y1, Y2, X, R, Z1, and Z2 Manual crowning 1 set of tooling Upgraded ESA 630 CNC control New laser safety system

Condition: excellent (used), Year of construction: 2012, Model Amada HFE M2 100t 3m, 4 axis Press Brake Year 2012 available end January 2026 Press Capacity (KN) 1000 Beam Length (mm) 3110 Distance Between Side Frames (mm) 2705 Throat Depth (mm) 420 Standard Stroke Length (mm) 200 Standard Open Height (mm) 470 Beam Width (mm) 60 Table Height (mm) 960 Approach Speed (mm/s) 1-100 Bending Speed (mm/s) 1-10 Return Speed (mm) 1-100 Number of Controlled Axis 4 Length (mm) 4580 Depth (mm) 2450 Height (mm) 2685 Lodpex Hdthjfx Ah Ujhr Weight (kg) 6900

Condition: excellent (used), functionality: fully functional, Year of construction: 2005, operating hours: 17,400 h, control type: CNC control, actuation type: hydraulic, controller manufacturer: TRUMPF, controller model: TASC 6000, bending force (max.): 230 t, working width: 3,230 mm, stroke length: 445 mm, throat depth: 420 mm, distance between stands: 2,690 mm, installation height: 615 mm, operating speed: 10 mm/s, number of axes: 6, type of crowning: CNC-controlled, oil tank capacity: 330 l, travel distance X-axis: 600 mm, back gauge adjustment: CNC-controlled, back gauge: 860 mm, overall weight: 16,000 kg, total length: 4,270 mm, total width: 2,120 mm, total height: 3,200 mm, number of support arms: 2, Equipment: CE marking, angle measuring system, documentation/manual, emergency stop, finger protection, foot remote control, safety light barrier, + 2 quick-adjustable support consoles on linear guides + 6-axis backgauge system (X1, X2, R1, R2, Z1, Z2) with control cabinet air conditioning + Hydraulic and hardened upper tool clamping + CNC-controlled crowning + Preparation for ACB + BendGuard safety device for 200 mm/s Standard equipment: - Four-cylinder upper drive concept - Electrohydraulic ram drive with proportional valve technology - Ram travel measurement system - Modern block hydraulics - Electronic pressure scale - Spherical suspension and inclination of the pressure beam - CNC backgauge system - Safe forward finger adjustment - 2 stop fingers - Self-centering, manual, hardened upper tool holder for vertical tool change - Hardened, hydraulic lower tool holder - Flat front cover - Modern safety guard - CE mark - Oil cooler Lsdpfox Elxvjx Ah Ushr - Control cabinet cooling (air-air) - Operating manual

Condition: used, functionality: fully functional, Hydraulic Press Brake Manufacturer: Promecam, Model RG - 104 Technical Details Lhodpjx Nnb Iofx Ah Uor Brand: PROMECAM Model: RG - 104 Year of manufacture: Pressing force: 100 tonnes Bending length: 4,050 mm Throat depth: 410 mm Stroke: 100 mm Dimensions: L 4.25 x W 1.8 x H 2.50 m Weight: approx. 5.5 t Equipment - Amada tool holder - Large tool package as shown in photos - Manual back gauge - Bending angle adjustment via handwheel All information without guarantee. A demonstration can be arranged at any time in our exhibition hall.

Condition: good (used), -Brake module -Input: 375VDC 5.4 A -Output: PAV=70 Ppk=2KW -Number: 2x converters available Price: per piece -Weight: 3 kg Ljdpeb A Nt Refx Ah Uohr

Condition: excellent (used), mileage: 1,001,003 km, first registration: 11/2012, fuel type: diesel, axle configuration: 4x2, wheelbase: 5,250 mm, fuel: diesel, driver cabin: sleeper cab, gearing type: automatic, emission class: euro5, total length: 9,550 mm, total width: 2,550 mm, loading space length: 7,080 mm, loading space width: 2,480 mm, loading space height: 2,460 mm, Year of construction: 2012, VF629AHA000007718 = Further Information = Technical Specifications Number of cylinders: 6 Engine displacement: 7,146 cc Maximum front axle load: 7,500 kg Maximum rear axle load: 11,500 kg Weights Unladen weight: 8,315 kg Lsdpeutfcujfx Ah Ujhr Payload: 10,685 kg Gross vehicle weight (GVW): 19,000 kg Condition Technical condition: very good Visual condition: very good Identification Registration number: 66-BBH-9 Further Information Contact Sales for more information. = Company Information = If you have any questions or suggestions, don't hesitate to contact us. We guarantee a response within 8 hours. Prices are excluding VAT. No rights can be derived from the information provided. Office Phone: MOB: (Dutch - English - German - French - Spanish - Italian) Available on WhatsApp and Viber. MOB: (Dutch) Available on WhatsApp and Viber. When paying by bank transfer, funds must be transferred to our bank account listed below. Always verify the payment details published on our website. If you receive any other information, please contact us. If you have any doubts, please call us so we can verify the invoice and/or payment. Bank details: Rabobank Laan van Limburg 2 4701BP Roosendaal IBAN: NL 89 RABO EORI/VAT/TAX: NL857401B(01) BIC/SWIFT: RABONL2U

Condition: used, functionality: fully functional, Year of construction: 2011, Used 3 meter CNC press brake Model: E Brake 100 3100 Capacity: 3100 x 100 tons Y1, Y2, X, R, Z1 and Z2 CNC controlled TS1 CNC control Year of manufacture: 2011 Lodox I Nzgepfx Ah Uehr Wila hydraulic tool clamping Available directly from January 7

Condition: excellent (used), Year of construction: 2017, operating hours: 3,200 h, pressing force: 130 t, Space requirement: 11,500 mm x 10,000 mm + Increased installation height/lift + 230 mm + 4-axis backgauge system + Rear work area lighting + Front work area lighting - TruBend documentation Automation BendMaster (60) Standard equipment: BendMaster - Sturdy base frame and manipulator made of cast aluminum construction - Load capacity 60 kg, sheet plus gripper - Low-level floor track in welded construction - Sheet sensor for contour detection - Rotary feedthrough for quick gripper change Gripper coupling on the BendMaster - Sensor system for 4-axis backgauge system - Electric drives - Double sheet detection - NC regrip station - Vacuum generation for suction grippers Lodpfxsxayl Dj Ah Ujhr Control - TRUMPF PC control with operator terminal - Teleservice via internet - Convenient operation: screen, mouse, keyboard Safety - Safety fence with access door Special equipment + Track extension to 10 m + Gripper change console + Modular vacuum gripper without separation (materials for 3 grippers) + Modular vacuum gripper with separation (materials for 3 grippers) + Clamp gripper with rotary axis + Sheet removal station with linear axis + Additional pallet for sheet removal station + Right-hand side door for safety fence (or left-hand side in combination with ToolMaster) Machine - Robust machine frame entirely in steel construction - Press beam - Spherical mounting of pressure beam with inclined position - Electro-hydraulic upper drive system with 4-cylinder technology - Optical set-up and positioning assist with control valves - Generous free space for bending - Flat front covers - Block hydraulic system - Electronic pressure gauge - Measuring system with glass scale and spring-back compensation - Hydraulic oil in machine (lifetime lubrication) - Oil cooler - Electrical cabinet cooling via air-to-air heat exchanger - Modern machine design Backgauge System - 2-axis backgauge system, X and R axes Tool Clamping - Hydraulic upper tool clamping - Lower tool holder, hydraulic clamping, hardened - Lower tool displacement, 2 positions, pneumatic Crowning - CNC crowning Control - TRUMPF TASC 6000 - Graphical workshop programming - Windows XPe (embedded), Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15-inch touch screen - Network capability - Teleservice via internet Operation - Control panel with LCD keypad and foot switch - Communication rail - MobilControl Safety - Standard safety equipment - CE marking

Condition: excellent (used), Year of construction: 2018, Very neat used press brake from Durma Lhedox I A Efspfx Ah Uor Type AD S 40320 Capacity 4050 x 320 tons Delem DA 69T control CNC-controlled axes: Y1, Y2, X1, X2, R1, R2, Z1, and Z2 (3D back gauge) Hydraulic Wila NS upper and lower clamping CNC crowning

Condition: good (used), functionality: fully functional, Year of construction: 2018, Full-option CNC press brake from Durma Model: AD S 40320 Lhjdpfx Ahjx Ivnmj Ujr Capacity: 4100 x 320 tons Delem DA69 3D graphical control Y1, Y2, X1, X2, R1, R2, Z1 and Z2 CNC-controlled Wila hydraulic upper and lower clamping Wila crowning system Akas Fiessler laser safety Year of manufacture: 2018

Condition: good (used), functionality: fully functional, Year of construction: 2016, Used Durma CNC press brake Type: AD Servo 30175 Capacity: 3050 x 175 tons Cybelec ModEva 15T CNC control CNC-controlled Y1, Y2, X and R axes CNC crowning Akas Fiessler laser safety Includes tooling set Lsdpjx Iflzsfx Ah Ushr