Used Busch R 5 for sale (121)

Condition: used, Year of construction: 1998, Format: 600 x 750 mm Equipment: Max. stacking height 1200 mm Min. stack height 540 mm Platform width 900 mm Platform depth 625 mm Fsdpfx Asy D Tc Tel Sjgh Load capacity 500 KG

Condition: refurbished (used), Technical specifications: Product number COBRA NC 0500 Year of manufacture 2023 Engine power 9 kW Capacity 490 m3/h Max. vacuum 0.01 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 500 kg Dimensions [H x L x W] 1111 x 781 x 660 mm The pump achieves a vacuum of 0.059 mbar, as confirmed by the measurement on the sensor in the video attached below (5.9 x 10^-2 on the sensor indicates a vacuum of 0.059 mbar). Pump and motor are water-cooled. After a major overhaul – very little use, like new. New oil. New refrigerant. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create negative pressure) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with this pump), pumping speed and its dependence on pressure, Fedpfx Aoz I Eq Eol Sjgh capacity (usually measured in m3 of gas pumped per unit of time).

Condition: used, Rotary vane vacuum pump – packaging – Manufacturer: Busch Type: 251-512 Condition: used, tested! Fedjdi Ekbopfx Al Segh Includes: oil filling Delivery time: in stock!

Condition: used, Rotary vane vacuum pump – packaging Fgedodi Eklopfx Al Sjh Manufacturer: Busch Type: CB0251B Vacuum: 0.5 mbar Condition: used, tested! Maintenance for the unit is offered separately! Includes: oil filling Delivery time: in stock!

Year of construction: 2009, condition: refurbished (used), functionality: fully functional, 1 liquid ring vacuum pump. Please read the description carefully from beginning to end! The pump is not suitable for: Water, the food industry, and non-corrosive media. For these media, more cost-effective materials such as 1.4408 or 1.4571 are better suited. Fedjigqutjpfx Al Sogh Caution! The pump does not have explosion-proof certificates. It is also not possible to replace the motor, as it is a special long-shaft motor. The mechanical seal also does not have EX certificates! The pump is made of the special Alloy 59 material! This alloy is used when conventional chrome-nickel steels are no longer sufficient in terms of corrosion resistance. Especially when chloride-induced pitting and crevice corrosion and stress corrosion cracking are a problem. Alloy 59 is used for: environmental technology, the chemical industry (chemical processes with oxidizing and reducing acids, resistance to wet chlorine gas), and waste incineration plants. Primarily, 2.4605 is used in the chemical industry, the pulp and paper industry, and in flue gas desulfurization plants. Excellent resistance to mineral acids such as nitric acid, phosphoric acid, sulfuric acid, and hydrochloric acid, and especially to sulfuric acid/hydrochloric acid mixtures. Typical applications are: -Equipment components for processes in organic chemistry with chloride-containing media, especially when catalysts based on chlorides are used. -Multipurpose plants in the chemical industry -Plant parts in the fine chemical and pharmaceutical industries -Scrubbers, heat exchangers, flaps, fans, and agitators for flue gas desulfurization plants (FGD) in fossil-fired power plants and waste incineration plants -SO2 scrubbers for ship diesel engines -Components for seawater and concentrated brines -Equipment and components for geothermal and sour gas applications -Reactors for acetic acid and acetic anhydride -Reactors for hydrofluoric acid -Sulfuric acid coolers -Piping in geothermal power plants -Components in flue gas desulfurization plants Manufacturer: Busch Type: LC 0220 A ZZO XX ZZ Volume flow: 195 m³/h Motor power: 7.5 kW Voltage: 400/690 volts Speed: 1440 rpm Vacuum: 33 mbar Material: 2.4605 (Alloy 59) NiCr23Mo16Al All ball bearings are new, and the mechanical seal has been refurbished by a specialist company. Weight: 121 kg Dimensions: Length 960 mm, Width 370 mm, Height 370 mm Connection: DN 50 (2")

Condition: used, Rotary vane pump booster Manufacturer: Busch Type: Panda WV 0500 C/B and Panda WV 1000 C/B available Fgodpfx Asb Rgxnel Sjh Suction capacity: 500 - 1000 m³/h Warranty: 12 months Status: Reconditioned Delivery time: upon agreement

Condition: good (used), Busch Vacuum Pump Fsdpowa Nzqjfx Al Sjgh Model 630 370 CFM

Condition: good (used), Busch Vacuum Pump Model 400 Fgsdpfswa Ra Uex Al Soh

Condition: good (used), Busch Vacuum Pump Type: 400-212 Fgedpfx Aowa Ucgjl Soh 235 CFM Dimensions: 1300 mm x 800 mm x 1100 mm.

Condition: good (used), Busch Vacuum Pump Fgsdpfxswa Unpj Al Seh Model 400-212

Condition: good (used), Rotary vane vacuum pump /// Oil-lubricated Manufacturer: Busch Fgjdpfxjbrants Al Soh Type: RC 0100B Ultimate pressure: approx. 20 mbar Pumping speed: approx. 100 m³/h Condition: General overhaul If you have any questions about this listing or general questions about vacuum generation, please do not hesitate to contact us.

Condition: good (used), Item: D-01876-Busch Vacuum pump Vacuum Pump Buusch, Type WN65 AO, Fgsdpfxoirfa Is Al Seh Motor 7,5 kW

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, Busch MM 1142 B VS3 Vacuum Pump Manufacturer: Busch Vacuum Solutions Model: MM 1142 B VS3 Serial Number: D15242694 Year of Manufacture: 2015 Capacity: 140 m³/h Weight: 175 kg Dimensions: 1000 mm × 400 mm × 700 mm Pump Type: Dry claw vacuum pump The Busch MM 1142 B VS3 vacuum pump is a modern, oil-free “dry claw” pump designed for efficient and clean generation of vacuum in industrial applications. Its oil-free compression chamber design eliminates the risk of process contamination, making this pump ideal for industries requiring high process purity. The unit features quiet operation, low operating costs, and high reliability. Its compact design makes integration into production lines and central vacuum systems easy. Applications: - Food and packaging industry - Production lines and automatic vacuum systems Fodpfx Alsxvi Aqs Segh - Plastics processing, foundry work, printing - Laboratories and central vacuum systems

Condition: excellent (used), Keyway milling machine Manufacturer: Busch Type: NF1 Year of manufacture: 1984 4 spindle speeds from 380 - 1500 rpm. Motor: 380 Volts Table surface: 600 x 250 mm Spindle motor: 380 Volts Fgedpfszdt Hpex Al Soh Power: 1.1 kW Weight: 780 kg Dimensions: Height with pallet: 1860 mm Width: 1300 mm Depth: 950 mm

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Fgodpezvrlusfx Al Sjh Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: like new (used), Rotary vane vacuum pump, oil-lubricated Fsdpfxsdf Ikdj Al Segh Manufacturer: Busch Type: R5 RA 0630 B Condition: Serviced, very good condition, used Warranty: 6 months Pumping capacity: 630 m³/h Operating fluid: Mineral oil Accessories: Suction filter Delivery time: in stock

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 85 kg, total length: 735 mm, total width: 420 mm, total height: 295 mm, volume flow: 120 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 1,420 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath for work with MAP atmosfere ( hig % of O2) Available in stock. Completely new with 12 months warranty Fodpfx Aljfk Sizs Segh Nominal flow: 100 m3 / h at 50Hz. End vacuum: 0.5 mbar abs. Any clarification, do not hesitate to contact us.

Condition: good (used), Busch TB24 I Banding Machine Fjdpfxozlgd Re Al Ssgh The machine is in very good condition. The device operates in manual or automatic mode. After inserting the material, the machine wraps it with tape, compresses, and seals it, creating an elegant package. Ideal for wrapping business cards, leaflets, and other materials. Technical specifications: Tape width: 30 mm Cycles per minute: 20-25 cycles/min Band dimensions: Length: unlimited Width: Paper – 24 cm Foil – 18 cm Height: 15 cm. The machine comes with: spare bands, an instruction manual, and a machine cover.

Condition: used, Year of construction: 2018, machine/vehicle number: D18451643, used vacuum pump Busch MM 1104 BP O2 for sale, YOM: 2018 Manufacturer: Busch, Vacuum Pumps and Systems Model: Mink MM 1104 BP O2 S/N: D18451643 MFG: 2018 New air filter Nominal pumping speed: 62 m³/h Ultimate pressure: 60 hPa (mbar) Nominal motor speed: 1800 min-1 Noise level (ISO 2151): 71 dB(A) Weight approx.: 155 kg Dimensions (L x W x H): 1080 x 430 x 590 mm Gas inlet / outlet: G 1 ¼" / G 1" (NPT) Max pressure: 1,2 - 2.0 bar (17-29 psi) Motor: 2.2 – 3.2 kW (3.0 HP), 3-phase, 230/460 V, 60 Hz Lubrification: dry/oil-free Cooling: air-cooled Description: The Busch Mink MM 1104 BP O2 is a specialized, industrial-grade dry claw compressor and vacuum pump. The "BP" designation stands for overpressure/pressure variants, while the "O2" specification denotes it is configured specifically for handling oxygen-enriched gases. 1. The Rotary Claw Pumping Principle The core of the pump consists of two claw-shaped rotors mounted on parallel shafts inside a synchronized pumping chamber. Synchronized Counter-Rotation: The rotors turn in opposite directions. Their movement is precisely synchronized by a timing gear drive located in a separate, sealed gear housing. Contactless Operation: As the claws rotate, they pass incredibly close to each other and the interior cylinder wall, maintaining tight tolerances measured in fractions of a millimetre. However, they never actually touch. Internal Compression: As the claws roll past the inlet port, gas is drawn into the expanding chamber. As rotation continues, the volume between the claws is trapped, compressed mechanically by the geometric shape of the rotors, and then forced out through the discharge port. Because there is zero friction or mechanical wear inside the pumping chamber, the pump requires no internal lubrication. This yields an entirely oil-free exhaust gas stream. Fsdszz Tm Rspfx Al Sjgh 2. Engineering Architecture: The "BP" Designation The BP (Back Pressure / Overpressure) variant modifies the internal geometry and sealing profile of the standard Mink platform. Dual-Function Flexibility: While traditional vacuum pumps exhaust directly to atmospheric pressure, BP variants are built with heavy-duty casings and specialized shaft seals. This allows them to operate as both low-pressure compressors and high-differential vacuum pumps. Variable Pressure Handling: They can safely discharge gas into a pressurized manifold system (up to standard rated overpressures, usually around 2.0 to 2.5 bar absolute) without suffering from seal failure or overheating. 3. Materials & Thermodynamics of the "O2" Variant Pumping high-purity or enriched oxygen (O₂ > 21%) presents severe thermal and chemical hazards. Standard industrial pumps will trigger a catastrophic flash fire if compressed oxygen reacts with hydrocarbon lubricants or friction points. The O2 variant incorporates specific thermodynamic and chemical isolation measures: Gearbox Lubricant: PFPE (Perfluoropolyether) synthetic fluid. It is chemically inert and completely non-reactive with pure oxygen. Price: 3.290 Euro + VAT, negotiable, FCA: Oradea/Romania Irrtum, Änderungen und Zwischenverkauf vorbehalten / Subject to errors, changes and prior sale / Ne rezervăm dreptul la greșeli, modificări și vânzare We speak English. /Wir sprechen Deutsch./ Beszélünk magyarul. /Nous parlons français/Vorbim romana

Condition: new, Year of construction: 2026, functionality: fully functional, overall weight: 550 kg, total length: 1,737 mm, total width: 861 mm, total height: 735 mm, volume flow: 756 m³/h, input frequency: 50 Hz, type of input current: three-phase, type of cooling: air, rotational speed (max.): 960 rpm, warranty duration: 12 months, protection type (IP code): IP55, Rotary vane vacuum pump in oil bath. Fgjdpfjftzuwox Al Ssh Marpa Vacuum brand pump Pump completely new. 12 months warranty. Nominal flow: 630 m3 / h at 50Hz. Final vacuum: 0.1 mbar abs. Any doubts, do not hesitate to contact us.

Condition: good (used), Year of construction: 1987, functionality: fully functional, machine/vehicle number: 7/787, Max. Die-Cut Size : 230 x 230 mm Fedszcd Atepfx Al Sogh Min. Die-Cut Size : 10 x 10 mm Die-Cutting Pressure (Maximum) : 5700 Kg Max. Stack Height : 170 mm Die-Cutting Strokes max. : 11 p/min Technical data can vary according to job, consumables and possible other factors

Condition: excellent (used), Year of construction: 2002, machine/vehicle number: 02022348, 50 Hz 140 m³/h 60 hPa Fedpjy H Iarefx Al Sogh

Condition: new, Year of construction: 2025, Roots booster vacuum pump. Available in stock. Marpa Vacuum brand pump. Pump completely new. 12 months warranty Fjdpfx Aeftzmdol Segh Nominal flow: 500 m3/h at 50Hz. Final vacuum: 3x10^-4 mbar Any clarification, do not hesitate to contact us.

Condition: excellent (used), Various vacuum pumps from cleanroom production (medical technology) are for sale. These pumps come from a company closure or relocation and were used under cleanroom conditions. Fgjdpfxozrtzpj Al Sjh Further information and images are available upon request. Inspections can be arranged by appointment.

Condition: used, Year of construction: 1994, functionality: fully functional, Used condition. Fedpfjxbpxiex Al Sogh