Key-way milling machine

Busch

Condition: refurbished (used), Year of construction: 2013, Technical specifications: Product number: WP 0500 D 4V1 Year of manufacture: 2013 Capacity: 500 m3/h Maximum vacuum: 0.1 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. Kedpfx Ahjzvrm Ej Dodr The unit has undergone a complete overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar.

Condition: as good as new (ex-display), Year of construction: 2024, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 310 mm, General: Spindle speed: 15,000 rpm Power: 7.3 kW Tool interface: HSK-A 40 Tool changer: 40 stations Control system: Siemens 840 DsL Working area Travel in X: 450 mm Ksdpfx Ajzf Admeh Dedr Travel in Y: 270 mm Travel in Z: 310 mm Rapid traverse (X/Y/Z): 75 m/min A-axis Swivel angle: +/- 120° System accuracy: +/- 5" Drive: Torque motor Spindle speed: 100 rpm C-axis Diameter of rotary table: 198 mm System accuracy: +/- 5" Drive: Torque motor Spindle speed: 200 rpm Equipment Rotary union: 6-pole, integrated in A and C axes Chip conveyor: Drag chain, discharge height 490 mm, rear

Condition: excellent (used), Year of construction: 2016, Technical specifications: Product number CB 0250 B Year of manufacture 2016 Engine power 7.5 kW Capacity 250 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar in the large section and 2.1 mbar in the small section. The pump is in perfect condition after a major overhaul. New bearings, seals, oil filter separators, and oil. Kdjdpjzvrmrefx Ah Dsr Oil-lubricated vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are divided according to their operating principle into: volumetric, flow, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with a given pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: refurbished (used), Technical specifications: Ksdpfx Ahjzvrmfo Dodr Product number RA 0250 D 5ZI Engine power 5.5 kW Capacity 250 m3/h Max. vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [h x l x w] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.5 mbar, as confirmed by the recorded video. The unit has undergone a major overhaul. The pump is in very good condition, with new filters, oils, separators, etc. Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: positive displacement, kinetic, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ionic pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with such a pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: good (used), travel distance X-axis: 3,500 mm, travel distance Y-axis: 2,000 mm, travel distance Z-axis: 800 mm, table load: 12,000 kg, total height: 3,900 mm, total length: 7,200 mm, total width: 5,200 mm, table length: 1,800 mm, table width: 1,600 mm, feed rate X-axis: 8,000 m/min, feed rate Y-axis: 8,000 m/min, feed rate Z-axis: 8,000 m/min, rotational speed (max.): 2,000 rpm, Table type boring mill TOS VARNSDORF - WHN 13 CNC MACH-ID 9612 Make: TOS VARNSDORF Type: WHN 13 CNC Control: Heidenhain TNC415 X - Travel: 3500mm Y - Travel: 2000mm Z - Travel: 800mm W - Travel: 1000mm Table Length: 1800mm Table Width: 1600mm Table load: 12 Speeds / ranges:2000Rpm Power: 37kW Spindle Taper: ISO50ISO/Bt/Mk Feed rate X-Axis:8000mm/min. Feed rate Y-Axis:8000mm/min. Feed rate Z-Axis:8000mm/min. Feed rate W-Axis:8000mm/min. Length: 7200mm Width: 5200mm Height: 3900mm Kdedey H Dahepfx Ah Der Weight: 34500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2015, Technical specifications: Product number WV 2000 C 001 Year of manufacture 2015 Capacity 2000 m3/h Max. vacuum 0.1 mbar For more information, please contact us by phone. The booster pump must operate in conjunction with an oil pump with a capacity 2-3 times lower. The unit has undergone a major overhaul and is ready for operation. Kjdpfezvrluex Ah Dedr New seals and bearings, new oil. Achieves a vacuum of 0.1 mbar, as demonstrated in the recorded video.

Condition: excellent (used), Year of construction: 2022, Technical specifications: Product number RD 0360 A 5H3 Year of manufacture 2022 Engine power 7.5 kW Capacity 300 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1500 rpm Weight 250 kg Dimensions [height x length x width] 1011 x 581 x 410 mm The pump achieves a vacuum of 0.4 mbar, which is confirmed by the measurement on the sensor in the video attached below. 4.8 -1 on the sensor display means a vacuum of 4.8 to the power of minus one, which equals 0.48 mBar. After major overhaul. The pump is in perfect condition. New oil. New oil filter. New exhaust separators. Kjdpfx Ahozvrh Ao Dodr Oil-sealed vacuum pump, suction – a device used in technology to remove gases (create a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time).

Condition: used, Year of construction: 2014, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 600 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 20,000 m/min, feed rate Y-axis: 20,000 m/min, feed rate Z-axis: 20,000 m/min, torque: 18,500 Nm, controller manufacturer: Heidenhain, controller model: iTnc530, table width: 600 mm, table length: 1,120 mm, table load: 800 kg, overall weight: 6,500 kg, spindle speed (max.): 8,000 rpm, coolant supply: 30 bar, distance table center to spindle nose: 680 mm, spindle nose: SK 40, number of spindles: 1, number of slots in tool magazine: 24, tool length: 300 mm, tool diameter: 90 mm, tool weight: 6 g, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, Additionally, the machine is equipped with: - Spindle change-over gearbox - Flat guideways - Centralized oil lubrication - Control cabinet cooler - Spindle oil cooler Kedpfx Ahsyh Ri Is Dedr - Grundfos IKZ pump - Oil skimmer - Hand wheel - Renishaw 3D measuring probe - Signal lamp - Tool cabinet - Various tool holders

Condition: refurbished (used), overall weight: 11 kg, Technical specifications: Product number RA 0400 B 4ZI Engine power 11 kW Capacity 400 m3/h Maximum vacuum 0.5 mbar Noise level 74 dB Rotational speed 1100 rpm Weight 350 kg Dimensions [h x l x w] 1411 x 981 x 1410 mm The pump achieves a vacuum of 0.5 mbar, which is confirmed by our recorded video (5.8 to the power of minus 1 on the sensor indicates 0.58 mBar). The unit, after a major overhaul, operates like new. New seals, filters, and separators. Oil-lubricated vacuum pump, suction – a device used in technology for removing gases (creating a vacuum) in a closed space. Pumps are classified according to their operating principle into: volumetric, jet, ion-sorption, ion-magnetic, molecular, condensation, adsorption, and ion pumps. The most important parameters of vacuum pumps are: final pressure (the lowest pressure that can be achieved with that pump), pumping speed and the dependence of this speed on pressure, capacity (usually measured in m3 of gas pumped per unit of time). Kdjdezvrhpjpfx Ah Dsr

Condition: refurbished (used), functionality: fully functional, Technical specifications: Product number: WV 1500 B 001 Year of manufacture: 2004 Capacity: 1500 m3/h Maximum vacuum: 0.09 mbar The booster pump must operate in conjunction with an oil pump with a capacity 2 to 3 times lower. Kdsdpjzvrgrefx Ah Djr The unit has undergone a major overhaul and is ready for operation. New seals and bearings, new oil. Achieves a vacuum of 0.09 mbar.

Year of construction: 1984, condition: good (used), Part on table ,marked with red ,not come. Kdedslz Izlspfx Ah Dor

Condition: used, 2 boring gauge screws, internal measuring screw from the manufacturer Busch D.B.P.a., with foreign patent. 2-point internal micrometer, used with wooden case – Friedr. Strack Wuppertal Kdsdpszumc Sefx Ah Der Measuring range [mm] 25-30 / 30-40 Scale value [mm] 0.005 Price on request All technical specifications are subject to typographical errors and errors. Sale exclusively to countries within the EU.

Condition: ready for operation (used), Year of construction: 1986, Available immediately from our location: Fully automatic milling machine, Busch Type NF 8/32 Year of manufacture 1986 Kdsdpfezukcvjx Ah Djr Groove width up to 32 mm Processing length up to 6100 mm Automatic material feed Automatic feed Drive power 5.5 kW Accessories: Support table Clamping devices, milling cutters Coolant system Digital display Weight 4 tons Price: EUR 2,500.00 plus VAT, ex works

Condition: used, Year of construction: 1971, Technical details: max. diameter of face turning: ca. Ø 900 mm revolution per minute: Spindel: 12,5 - 00 / 24 step U/min revolution per minute: Planscheibe: 8 - 190 / 12 step U/min feed steps: Planscheibe: 0,03 - 3 / step rapid traverse: alle Bewegungen: 2000 / 4000 m/min tool taper: der Arbeitsspindel: ISO 50 / SK50 table clamping surface:: 700 x 800 table rotating: 360° Grad drill table adjustment: quer: 800 mm max. table load: 1500 kg total power requirement: ca. 11,0 kW weight of the machine ca.: 7800 kg dimension machine xH: 3,0 x 2,0 x 2,6 m dimensions electric cabinet: 1800 x 400 x 1950 mm Ø of the face plate 420mm Movement of the face slide 180mm largest Ø during facing approx. 900mm Longitudinal movement of the column 700mm Vertical movement of the headstock 700mm Feed drive of column, headstock and clamping table: Ksdpfx Aju Idtpeh Dedr -for spindle operation=0,20 - 10 mm/rev with 34 speeds -for operation with faceplate= 0,16 - 16 mm/rev with speeds Equipment: optical fine measuring device/measuring system for axes X/Y/Z/B-axis hydraulics machine feet/footplates control panel with boom *

Condition: new, Year of construction: 2025, Efficient Substantial energy savings compared to conventional vacuum generators, minimized operating costs Nearly maintenance-free Dry and contact-free operation Nominal pumping speed 245 / 290 m³/h (50 / 60 Hz) Ultimate pressure 100 hPa (mbar) (50 / 60 Hz) Ultimate pressure (continuous operation) 200 hPa (mbar) (50 / 60 Hz) Nominal motor rating 5.1 / 6.8 kW (50 / 60 Hz) Nominal motor speed 3000 / 3600 min⁻¹ (50 / 60 Hz) Noise level (ISO 2151) 75 / 79 dB(A) (50 / 60 Hz) Weight approx. 240 / 290 kg (50 / 60 Hz) Dimensions (L x W x H) 1090 x 515 x 450 mm (50 / 60 Hz) 1065 x 515 x 450 mm (50 / 60 Hz) Gas inlet / outlet G 2" / R 1" Kjdpfx Astu H Eioh Djdr