Used Bystronic for sale (172)

Year of construction: 2007, condition: ready for operation (used), A Beyeler press brake, today Bystronic, is available. Working length: 4100mm, press force: 2250kN, max. stroke: 400mm, throat depth: 250mm, installation height: 917mm, rapid traverse down/up: 150mm/s, working speed: 10mm/s, hydraulic pressure: 315bar, oil volume: 815l, max. oil temperature: 65°C, power: 30kW, max. upper tool weight: 400kg, max. workpiece weight: 13kg. Machine dimensions X/Y/Z: approx. 5500mm/2300mm/3350mm, weight: approx. 22000kg, operating hours: approx. 35000h. Including numerous upper tools, blades and lower tools. Documentation available. On-site inspection is possible. Gtsdpfxjx U Dwps Aadju

Condition: used, CNC Press Brake BEYELER - BYSTRONIC Type PR 8 (2500 kN x 3100 mm) Serial No. Year of manufacture: 2001 Pressing force: 250 tons Working length: 3100 mm Stroke: 365 mm Frame gap: 410 mm Clearance between side frames: 2750 mm Table width: 100 mm, 200 mm with table extension Table height above floor: 840 mm Backgauge X-axis: 620 mm (travel) Backgauge R-axis: 240 mm Approach speed: 200 mm/s Working speed: 1-10 mm/s Y rapid traverse: 200 mm/s Y working speed: 1-10 mm/s Y return speed: 135 mm/s Oil capacity: approx. 400 liters Motor power: 18.5 kW Connected load: approx. 25 kW Power supply: 400 Volt, 50 Hz, 50 Amp. - 8-axis CNC control Cybelec DNC 1200 PS/A, X1 + X2 / R1 + R2 / Z1 + Z2 - 2 freely programmable backgauge fingers, movable laterally (Z1+Z2) - Backgauge (X-axis 620 mm) with 3 stop positions up to max. 1080 mm Gedpjya Iaqefx Aadetu - Press beam with servo valves and measuring system Y1 and Y2 - FIESSLER AKAS safety light curtain - Operation via electric foot switch and/or two-hand control panel - Hydraulic clamping for the upper tool (TRUMPF system) with 20 mm clamping groove - Tool holder for the lower tool, height 160 mm x width 60 mm, with locating groove 14 x 23 mm - Tool system TRUMPF, supplied without tools Space requirements (L x W x H): 0 x 2500 x 3400 mm Transport height of the machine: 3360 mm Weight: 17,000 kg Good condition

Condition: good (used), Year of construction: 2014, with changing table (without automtic storage) ByVision Touchscreen and manual control unit In contrast to the CO2 ByStar, the ByAutonom can change the cutting heads and cutting nozzles automatically. At the very end, only a BySprint could do that and then the new Fiber again. This means I can cut thick and thin material one after the other and the machine gets the right cutting head. Technische Daten / technical details: Laserleistung / laser capacity 6 kW Materialdicke Stahl / thickness of the material steel 25 mm Materialdicke Edelstahl / thickness of the stainless steel 20 Mm Materialdicke Alu / thickness of the material Aluminium 12 mm Blechgröße x,y / sheet size x,y 3000, 1500 mm Schneidbereich x,y,z, / cutting area x,y,z 3048, 1524, 80 mm Antriebsleistung / drive capacity 51 kW Gewicht ca. / weight ca. 15000 kg Godpfx Aoqmmkceadetu Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding.

Year of construction: 2006, condition: ready for operation (used), Table dimensions: 3000x1500mm, connected load: 52kW, operational hours counter ca. 28,000h, with Extraction TECHNO FILTER BFK-40 and shuttle table, without necessary software. Gedpfehw E Elsx Aadetu

Condition: used, Bending tool, die, upper knife, upper tool, tool for press brake Gtedpfsd D Hv Nex Aadeu -divided -Dimensions: 31.007.2101 -Height: 86 mm -Length: 2x100 mm -Dimensions: 21.002.01.01 -Height: 155 mm -Length: 2x100 mm -Packed: in wooden box -Weight: 11.9 kg

Condition: excellent (used), functionality: fully functional, Year of construction: 2017, operating hours: 4,500 h, machine/vehicle number: 1703226006, control type: CNC control, degree of automation: manual, actuation type: pneumatic, laser type: fiber laser, laser power: 500 W, table length: 800 mm, table width: 1,100 mm, working length: 600 mm, working width: 1,000 mm, Equipment: dust extraction, emergency stop, fume extraction, DEN / Bystronic FCCB 1012 – 500 W Fiber Laser Machine For sale is a DEN / Bystronic FCCB 1012 fiber laser machine with 500 W power output. This machine is ideal for precise cutting and processing tasks in metalworking. The scope of delivery includes: DEN / Bystronic FCCB 1012 laser machine (500 W fiber) Matching extraction unit All related parts and components Original purchase price was 110,000 Euros. Gtodpeyg E Ilefx Aadou

Condition: used, Year of construction: 2007, Technical details: Gtsdpfx Ajx A S Rdsadsu pressure: 225 t chamfer lenght: 4100 mm height of stroke: 400 mm throat: 250 mm dayligth: 917 mm total power requirement: 30 kW dimensions of the machine ca.: 5500 x 2270 x 3310 mm weight of the machine ca.: 22 t

Condition: excellent (used), Year of construction: 2004, functionality: fully functional, total length: 33,500 mm, input voltage: 415 V, type of input current: AC, Equipment: documentation/manual, BYSTRONIC / LENHARDT 4000 x 1600, IGU Line – Double Gas Press + Robot Godpfx Aajxf Hm Sedstu Autom. IGU Glass Production Line, h=1,6 m Double Gas Press, Sealing Robot | Right – Left Max. glass sizes: 4000 x 1600 mm, Year: 2004 – Washing and Drying Machine (8 brushes) with Inlet and Outlet Conveyor, Blower, – Frame Mounting Station, – Autom. Double Gas Press, – Sealing Robot, – Inlet and Outlet Conveyors. In good working condition. Inspection is possible by appointment. Available: NOW

Condition: new, functionality: fully functional, Year of construction: 2026, laser power: 6,000 W, table length: 4,000 mm, table width: 2,000 mm, positioning accuracy: 0.05 mm, workpiece weight (max.): 1,800 kg, overall weight: 8,000 kg, total length: 10,880 mm, total width: 3,380 mm, total height: 2,280 mm, warranty duration: 12 months, space requirement height: 3,000 mm, space requirement length: 11,500 mm, space requirement width: 4,500 mm, DNE D-Power – The High-Performance Laser Cutting Machine for Your Production The D-Power laser cutting machine with exchange table is the ideal solution for beginners. With a generous table size of 1500 x 3000 mm and extended options ranging from 2000 x 4000 mm to 2500 x 6000 mm, 2500 x 8000 mm, and 2500 x 12000 mm, and laser power of 3,000, 4,000, and 12,000 watts, this machine covers a wide variety of applications. The value for money of the D-Power laser cutting machine will surprise you. You receive high-quality technology and performance at an attractive price, making it an excellent choice for companies and craftsmen who want to enter the world of laser cutting. Take advantage of the latest technologies and increase the efficiency of your production processes with this powerful and versatile machine. Gjdpowzv A Dofx Aadjtu

Condition: new, functionality: fully functional, Year of construction: 2026, degree of automation: semi-automatic, actuation type: electric, laser power: 30,000 W, sheet thickness (max.): 80 mm, power: 30 kW (40.79 HP), warranty duration: 12 months, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, This machine impresses with its excellent price-performance ratio and complies with CE standards. You will be pleasantly surprised. DNE laser cutting machines are designed for professional use in both industry and trade. We offer you a top-class product tailored to your requirements in terms of reliability and cutting performance. Our German service team ensures the smooth installation and commissioning of the laser cutting system, as well as comprehensive training. We also perform all servicing and maintenance tasks. If you require financing options, feel free to consult us. You are welcome to schedule a viewing and demonstration to see the quality for yourself. A 45-degree laser cutting head for preparing welding bevels or countersinks is also available. Gtsdjwzv Erjpfx Aadou The laser cutting machines are available in the following working sizes: Sheet nominal size X 3000 mm x 1500 mm, 4000 mm x 2000 mm, 6000 mm x 2000 mm, and 6000 mm x 2500 mm. Laser power options range from 2,000 watts to 15,000 watts.

Condition: new, Year of construction: 2025, laser power: 30,000 W, This machine was developed to cut large sheet thicknesses and formats quickly and cost-effectively. The robust machine frame can accommodate and process even the heaviest loads. Laser powers from 400 to 40000 watts are possible. Gsdpfxotk R N Ns Aadotu Sheet thicknesses of less than 1 mm up to 100 mm are no problem. Small webs and drill holes can be cut with such a system without any problems. Sheet lengths of over 30 meters and widths of 3 to 5 meters. We look forward to your inquiry and will be happy to advise you.

Condition: new, functionality: fully functional, Year of construction: 2026, controller manufacturer: Siemens, laser type: fiber laser, laser source manufacturer: MAX Photonics, laser power: 12,000 W, working length: 6,050 mm, overall weight: 5,000 kg, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, safety light barrier, DNE pipe and profile laser cutting machines (one of the best systems on the market) are characterized by a top price-performance ratio. Gtodpfx Aaoq U A U Uedsu The machines are robust, fast and dynamic in operation. You can choose between a semi-automatic and a fully automatic pipe loader. These machines are available with diameters of up to 240mm, 350mm and 520mm as well as 640mm. Laser outputs from 3 to 12 kW and lengths of up to 12 meters. A 45 degree laser cutting head is also available. We would be happy to make you an offer and are convinced that you will be satisfied. Our own German service team will accompany you from the installation of your laser cutting system to training.

Condition: good (used), functionality: fully functional, Year of construction: 2018, laser hours: 7,726 h, laser power: 6,000 W, Used Bystronic fiber laser cutting machine, type Bysprint 6520, 6 KW, cutting area 2x6.5 m, year 2018, last service December 2025. Cutting hours: 7,726; standby: 28,285 Gsdpfxox Sxw Se Aadotu

Condition: excellent (used), Bystronic Type: ERMM180 Thermoplastic applicator Field of application The thermoplastic applicator applies a thermoplastic material to rectangular glass panes rectangular glass panes as part of a production line for solar modules. The plastic forms a seal to a second pane of glass, which is applied in a later step. applied in a later work step. The panes are fed, applied and removed on horizontally running belts/belt conveyors. belts/conveyors. The thermoplastic applicator is a highly technical machine that has to fulfill many requirements with great precision. For this reason, you should only use products (glass, sealant) that meet the specifications on the following pages. the following pages. This helps to achieve high-quality and safe production. production. Performance and connected loads Maximum transport speed: 18 m/min Height of the glass running surface: 1100 mm Height of the applied sealant line: 0.5 to 1.2 mm Maximum width of the applied sealant line: 12.0 mm Required constant pneumatic inlet pressure: 6.5 to 8.0 bar Pneumatic operating pressure: 6.0 bar Compressed air consumption in normal operation: 10 standard liters/min Compressed air consumption when changing barrels: 500 standard liters/min Average energy consumption per hour: 10 kWh Working temperature of the sealant: 110°C to 130°C Ambient conditions and emissions Minimum ambient temperature: +15°C Maximum ambient temperature: +35°C Maximum relative humidity:: 75% Noise level: less than 70 dB (A) Requirements for the drums for the sealant Design: Material lidded container D18 according to DIN 6644 - with base (F1) and smooth outer surface (jacket design, smooth). Capacity: 216 liters Gjdpfxod N Erpo Aadjtu Inner diameter: 571.5 mm Height: 874 mm Minimum wall thickness: 1.25 mm Machinable glass panes Types of glass Glass panes with a smooth surface can be processed (float glass). Dimensions and weights Smallest dimensions Largest dimensions Geometry 1198 mm 1200 mm Length LS 498 mm 600 mm Width BS 1.8* mm 5.0* mm Thickness DS Thermoplastics based on poly-iso-butylene (butyl) can be processed. The plastic must be flowable in the range of approx. 110°C to 130°C and have a defined viscosity curve. viscosity curve. Only use materials that have proven themselves in practice and that have been approved by the manufacturers of these materials and by Bystronic. by the manufacturers of these materials and by Bystronic for your intended use. intended use. For detailed product descriptions and information on handling, storage and disposal of the plastic disposal of the plastic used can be found in the information sheets and safety data sheets provided by the manufacturers of the plastics. Dimensions of gantry robot with glass conveyor Height x width x depth: 2800 x 1890 x 2735 mm Weight of the gantry robot: 850 kg Weight of the glass conveyor: 1400 kg Drum pump dimensions Height x width x depth: 3320 x 1060 x 1200 mm Weight (without drum): 850 kg Weight (with drum): 1100 kg Height H for drum pump FP1: 4400 mm Height H for drum pump FP2: 4000 mm Control cabinet dimensions Height x width x depth: 2200 x 1800 x 600 mm Weight: 450 kg The applicator was used with the material butyl. Condition: second-hand / used From test laboratory, as good as new condition, only a few operating hours for testing! Scope of delivery: (see picture) (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), functionality: fully functional, Year of construction: 2010, control type: CNC control, controller manufacturer: Cybelec, bending force (max.): 160 t, stroke length: 200 mm, number of axes: 4, type of crowning: CNC-controlled, number of support arms: 2, Equipment: CE marking, european tool clamping system, foot remote control, lower tooling, safety light barrier, upper tooling, Used Bystronic Xact 160 EP 40-160 CNC Pressbrake For Sale Gjdpfxsx A E Rkj Aadotu Capacity: 4metre x 160ton With: Cybelec DNC 880S Control 4 Axis (Y1, Y2, X, R + Crowning) Safety Guards Fully Enclosed Rear Glass Doors Wandering Foot Pedal/Pedestal Stop Serviced with Bystronic UK With upper and lower tooling

Year of construction: 2014, condition: ready for operation (used), General Data Machine weight 14250 kg Control Unit Brand BYSTRONIC Main Drive Laser power 6000watt IPG Number of axis 3 Additional Equipment Incl ByTrans Extended Gsdpfxsx D Eivs Aadetu This 3-axis Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 was manufactured in 2014. Ideal for precision fiber laser cutting, this machine ensures efficient operation and consistent performance. Consider the opportunity to buy this Bystronic BySprint Fiber 4020 + ByTrans Extended 4020 fiber laser cutting machine. Contact us for more information. Application Types Cutting

Condition: good (used), functionality: fully functional, Year of construction: 2015, operating hours: 4,000 h, machine/vehicle number: 10059806/30023735, laser type: fiber laser, laser power: 6,000 W, laser wavelength: 10,601,080 nm, sheet thickness (max.): 30 mm, sheet thickness steel (max.): 25 mm, sheet thickness stainless steel (max.): 30 mm, sheet thickness aluminum (max.): 30 mm, sheet thickness brass (max.): 15 mm, sheet thickness copper (max.): 12 mm, table length: 4,030 mm, table width: 2,020 mm, working length: 4,000 mm, working width: 2,000 mm, travel distance X-axis: 4,030 mm, travel distance Y-axis: 2,020 mm, travel distance Z-axis: 70 mm, cutting speed: 55,000 mm/min, power: 6 kW (8.16 HP), input voltage: 400 V, type of input current: AC, type of cooling: water, compressed air connection: 10 bar, overall weight: 14,250 kg, Equipment: centralized greasing system, cooling unit, documentation/manual, dust extraction, emergency stop, fume extraction, nozzle changer, safety light barrier, Excellent laser cutting machine. Very little maintenance and repairs. Gtedpfxsxrl Rvj Aadou

Condition: new, Year of construction: 2019, Hello, for sale is a new spare part for a Bystronic table: CUTTING HEAD HUB10 ART. B-017530-V03-A. Gsdpfxeygl Dtj Aadotu

Condition: ready for operation (used), functionality: fully functional, Year of construction: 2023, operating hours: 1,990 h, laser power: 12,000 W, sheet thickness steel (max.): 30 mm, travel distance X-axis: 3,100 mm, travel distance Y-axis: 1,580 mm, travel distance Z-axis: 100 mm, Bystronic ByStar Fiber 3015 Dynamic Edition F12000 from year of manufacture 2023 with only 1,990 cutting hours! Original purchase price of the machine was approximately 870,000 EUR! TECHNICAL DETAILS Travel X-axis travel: 3,100 mm Y-axis travel: 1,580 mm Z-axis travel: 100 mm Maximum Sheet Thicknesses Steel: 30 mm Stainless steel: 30 mm Aluminum: 30 mm Brass: 15 mm Copper: 12 mm Positioning Speed Maximum positioning speed (X/Y axis): 120 m/min Maximum simultaneous positioning speed: 170 m/min Positioning Accuracy Bilateral repeatability of axis R: 0.025 mm Average bilateral positioning deviation of axis M: 0.05 mm Edge detection accuracy: ± 0.5 mm Workpiece Weight Maximum single workpiece weight: 1,100 kg Maximum workpiece weight on both shuttle tables: 1,850 kg Changeover Time Shuttle table change time: 25 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 12,150 x 6,000 x 3,200 mm Machine weight: 11,000 kg Gjdpfxoxxklfo Aadjtu Laser Source Laser source: Fiber 12000 Power: 12,000 W Adjustable range: 1,200–12,000 W Wavelength: fiber Consumption Total power consumption (incl. exhaust, chiller): 27 kW Operating Hours Cutting hours: 1,990 h Power-on hours: 13,428 h EQUIPMENT Detection Eye BeamShaper NCT & KerfScan Second high-pressure cutting gas channel Prepared for N2 generator Dust extraction system for internal installation Electrical cabinet position: top (mezzanine structure not included in scope of delivery) Note: The machine has already been dismantled, is stored, and is no longer under power.

Condition: excellent (used), Year of construction: 1998, Year of manufacture: 1998 Gedpfxewn Hfie Aadstu Model: HÄMMERLE BM 200 - 4100 Catalog number: 11803-37 Serial number: 590 097 Pressure: 2000 kN Working length: 4100 mm Max. stroke: 400 mm Reach: 250 mm Weight: 18,900 kg + Tools

Condition: used, • Load capacity 150 kg • Year of manufacture 2013 • Maximum pane/frame size – 1500 x 2400 mm • Machine no. – L-220.1743 Gedpfswcm U Hox Aadstu • Price upon request

Condition: good (used), functionality: fully functional, Year of construction: 2015, laser power: 4,400 W, Equipment: documentation/manual, CNC Laser Cutting System Bystronic ByAutonom 3015 4400 Watt with BytransCross/BytransLine Automation Max. X working area: 3000 mm Max. Y working area: 1500 mm Max. Z working area: 80 mm Control: ByVision Laser power: 4,400 watts Maximum sheet thickness, steel: 25 mm Maximum sheet thickness, stainless steel: 20 mm Maximum sheet thickness, aluminium: 12 mm 1 Base Machine 1.1 ByAutonom 3015; ByLaser 4400 1.2 Automatic shuttle table system with 2 shuttle tables 1.3 Integrated control cabinet 1.4 ByVision 1.5 Operator comfort options 1.6 Touchscreen with ByVision user interface 1.7 Condition Messenger 1.8 Maintenance Messenger 1.9 Restart Manager 1.10 System Manager 1.11 ByHand (manual guidance function) 1.12 Cutting Parameter Assistant 1.13 Uninterruptible Power Supply (UPS) 1.14 Laser plasma cutting of thick materials 1.15 Cutting bridge 1.16 Cutting head with 5" and 7.5" lens cassettes 1.17 Collision detection 1.18 Automatic nozzle centring 1.19 Regulated pulsed piercing 1.20 Bypos CO₂ 1.21 Cut Control 1.22 Lens protection 1.23 Nozzle cleaning 1.24 Scanning function 1.25 ByLaser 4400 laser 1.26 Magnetically mounted compressor 1.27 Power Saving Mode 1.28 Output coupler protection 1.29 Interface for automation/handling 1.30 ByLaser 4400 chiller 1.31 Laser gas premix Gtodex Aq S Hjpfx Aadju 1.32 Operator safety in cutting area 1.33 Operator safety in loading/unloading area 1.34 Voltage 400V / 50Hz 1.35 Electrical connection (machine, incl. laser source) 1.36 Electrical connection for laser source dehumidifier 1.37 Compressed air supply (machine incl. laser source and chiller) 1.38 Material specification 1.39 Part tolerances and cut surface quality 1.40 Assist gas supply and gas quality 1.41 Ambient conditions 1.42 Structural requirements 1.43 System documentation 2 Accessories for the machine 2.1 Laser source position 270° 2.2 Enclosed housing/roof 2.3 Parts and cross conveyor in cutting area 2.4 Dust extraction unit with drum adapter: 3000 (200 l/55 gal drum) 3 Value Packages 3.1 Kit with lens cassette and nozzle changer 3.1.1 Automatic nozzle changer (kit) 3.1.2 Automatic lens cassette changer (kit) 4 BytransCross/BytransLine 4.1 BytransCross 3015 includes: - 2 manually movable sheet metal tables - Sheet separation with double sheet detection 4.2 Surcharge for electrically driven sheet metal table

Condition: good (used), functionality: fully functional, Year of construction: 2021, laser power: 6,000 W, The machine is powered on and can be inspected at any time. X working area max.: 4000 mm Y working area max.: 2000 mm Z working area max.: 100 mm Control system: ByVision Laser on-time: 17,372 hours Laser beam on-time: 3,572 hours 1. Base machine Gtedpfx Aaexxic Aedju 1.1 ByStar Fiber 4020 Dynamic Edition F6000 1.2 Scope of delivery 1.3 Safety and guidelines 1.4 Complete documentation 1.5 Spot Control 1.6 Collision detection 1.7 Automatic nozzle centering 1.8 ByPos Fiber 1.9 Cut Control Fiber 1.10 Nozzle cleaning 1.11 Laser diode pointer 1.12 Scanning 1.13 Cutting bridge 1.14 Shuttle table 1.15 Laser source 1.16 Chiller 1.17 Tank heating 1.18 Tropicalization 1.19 Machine control system and operator interface 1.20 Uninterruptible power supply (UPS) 1.21 Condition Messenger 1.22 Maintenance Messenger 1.23 Cutting plan editor 1.24 Restart manager 1.25 System manager 1.26 Cutting parameter assistant 1.27 OPC interface cutting 1.28 Handheld operator device 1.29 Electrical connection 1.30 Compressed air (machine, laser source, chiller, extraction system) 1.31 Material specification 1.32 Cutting gas 1.33 Ambient conditions 1.34 Structural requirements 2. Accessories for the machine 2.1 Detection Eye 2.2 Special position of the control cabinet 3. Additional options 3.1 Part marker (printer) 4. Automation 4.1 AWS16 4000x2000 h. 9800 mm, incl. 70 raw sheet cassettes and 20 return cassettes, 3-ton cassette, total number of storage locations 258 4.2 Handling device BYTRANS MODULAR 4020 Flex 5. Value Packages 5.1 Comfort The Comfort Value Package includes: - Automatic nozzle changer with 64 positions - Parts and cross conveyor in the cutting area - Scrap carriage under shuttle table (crosswise)

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Working range laser: 8000 x 2500 x 150 mm Gtjdpfx Aaexra Rwsdeu positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Max. workpiece weight: 15000 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 20200 mm Width: 4150 mm Height: 2620 mm Machine weight: 32500 kg

Condition: new, Year of construction: 2025, Laser power: 30000 Watt Working range laser: 6000 x 2500 x 270 mm positioning speed X/Y/Z: 200 m / min simultanious: 280 m / min Gtsdpfxewcl Ufe Aadeu Max. workpiece weight: 5500 kg Max. steel: 50 mm Max. stainless steel: 40 mm Max. aluminium: 35 mm Max. copper: 20 mm Max. brass: 20 mm Length: 16300 mm Width: 4150 mm Height: 2620 mm Machine weight: 25800 kg