Used Calibration Grinding Machine for sale (65,778)

Condition: used, Year of construction: 2019, Calibration grinding machine Manufacturer: Lingi Jianzhong Type: BSG2613C Year of manufacture: 2019 Rsdpfozuzc Tox Abujch Technical data - Maximum working width: 1300 mm - Processing thickness: 5-80 mm - Processing length: 780 mm - Processing accuracy: 0.08 mm - Dimensions of the grinding belt: 1350x2800 mm - Grinding belt speed: 31 m/s - Roller diameter: 2x 320 mm - Total power: 165 kW - Main motor power: 2x 75 kW - Feed motor: 11 kW - Lifting motor: 2x 0.75 kW - Brush motor: 2x 0.75 kW - Feed speed: 10 - 30 m/min - Operating air pressure: 0.5 - 0.8 MPa - Volume of the dust extraction container: 24000 m³/h - Weight: 14.5 t - Overall dimensions: 3100x2100x3000 mm - Voltage: 380V 50Hz Note: The technical data and descriptions are a transcript of the original order confirmation. The data is for informational purposes only and is not binding.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, Wide belt sanding machine / calibration and fine sanding machine Manufacturer: Homag Type: Sandteq W-100 (Optimat SWT124/RC Performa) Year of manufacture: 2020 Calibration and fine sanding machine Working width: 1100 mm Workpiece thickness: approx. 3 - 160 mm Equipped with: 1x sanding roller unit / calibration roller (R-unit) Contact roller, diameter approx. 140 mm Rcjdpfxozznh No Abueh 1x combination unit / sanding roller + sanding shoe (C-unit) with electro-pneumatic pressure bar (EPS system) 1x cleaning brush with finishing brush Sanding belt dimensions: 1120 x 1900 mm Feed rate continuously adjustable integrated infeed and outfeed table integrated control cabinet touch screen operator terminal Compressed air: 6 bar Required extraction capacity: approx. 3800 m3/h Total connected load: approx. 30 kW Weight: approx. 1900 kg

Condition: ready for operation (used), Year of construction: 1993, Automatic sander VIET Mod. Rita 4C EL Fixed plane moving heads Working width 1350 mm Working height 4 – 160mm Nr 03 suction hood depressors diameter 150 mm Belt feed speed 6 – 20 with 3 kw inverter Hood carpet cleaning brush diameter 120 mm Composition: 1st transversal polishing unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 2nd roller sanding unit mod. R320 – 40 rubber coating 40° SH Sanding belt 3250 x 1400 mm Speed 1.5 – 12.5m/s Inverter kw 15 Belt cleaning blower Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 3rd buffer polishing group mod. TE 60 electronic pad 60 sectors Sanding belt 3250 x 1400 mm Velocity 2.9 – 14.1m/s Inverter kw 15 Belt cleaning blower Rcodpfx Aeltlx Tsbush Two extraction hoods with a diameter of 140 mm and one with a diameter of 200 mm 4th cross sanding unit mod. TET 60 electronic pad 60 sectors Lamellar tape 6150 x 140 mm Our abrasive 8350 x 170 mm Velocity 5.6 – 26.2m/s Inverter kw 15 Three 140 mm diameter extraction hoods 5th scotch-brite group Engine kW 0.55 Suction hood diameter 140 mm 6th brush unit Engine kW 0.55 Suction hood diameter 140 mm 7th panel cleaning rotary blower group

Condition: ready for operation (used), grinding length: 2,500 mm, grinding wheel diameter: 750 mm, grinding diameter: 400 mm, distance between centers: 2,500 mm, spindle speed (max.): 360 rpm, spindle speed (min.): 25 rpm, workpiece spindle speed (max.): 360 rpm, Newall Cylindrical Grinder 400 x 2500mm Model: LA 96 Capacity: 400 x 2500mm Wheel Size: 75 x 750mm Work Head Speeds: 25-360 RPM Machine With: 2 Steadies Rodpez S Nmyefx Abujch Swivel Table Coolant System

Condition: ready for operation (used), functionality: fully functional, total length: 1,300 mm, total height: 1,800 mm, total width: 800 mm, center height: 150 mm, overall weight: 700 kg, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the specified timeframe between November 16, 2026, and November 26, 2026! TECHNICAL DETAILS Maximum height: approx. 150 mm Spindle length: approx. 800 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,300 x 800 x 1,800 mm Weight: 700 kg Rjdpfez Ilymex Abujch External reference: Hercegfi - Lot 112

Condition: used, Year of construction: 1998, Danobat CNC Cylindrical Grinder RP 1600 E - System 200 BTV 30 CNC Control, Year Of Manufacture 1998, Coolant, steadies & accessories, manuals, Wheel Balancer. Rcedpfx Asw A Sd Hobuoh

Condition: used, JONES AND SHIPMAN EIT 1076 PRODUCTION CYLINDRICAL GRINDING MACHINE MADE IN ENGLAND CAPACITY: 250 x 700.0mm DROP DOWN INTERNAL SPINDLE VARIABLE SPEED HEAD METRIC DIALS UNIVERSAL BED Rsdpfx Abozw U Twjuech PAPER FILTRATION SYSTEM AUTO CYCLE

Condition: good (used), Year of construction: 2001, functionality: fully functional, grinding length: 450 mm, grinding width: 150 mm, total height: 2,129 mm, total length: 1,940 mm, total width: 1,317 mm, workpiece weight (max.): 120 kg, grinding height: 510 mm, grinding wheel diameter: 205 mm, distance table to spindle center: 510 mm, table length: 510 mm, table load: 120 kg, type of input current: three-phase, table width: 150 mm, overall weight: 1,250 kg, grinding spindle motor power: 1,500 W, travel distance X-axis: 530 mm, travel distance Y-axis: 175 mm, rotational speed (max.): 2,400 rpm, grinding spindle speed: 2,400 rpm, input voltage: 400 V, Equipment: rotational speed infinitely variable, 2001 Okamoto ACC-450DXA Surface Grinder | 450 x 150mm Used 2001 Okamoto ACC-450DXA Hydraulic Surface Grinding Machine for Sale – 450 x 150mm Grinding Capacity – Automatic Grinding Cycle – Spare Grinding Wheels Included Manufacturer: Okamoto Model: ACC-450DXA Machine Type: Hydraulic Surface Grinder Year: 2001 Condition: Working Well Includes: Coolant Equipment Magnetic Chuck Cross Feed Digital Display Vertical Digital Display Wheel Guard Spare Grinding Wheels Machine Description Used 2001 Okamoto ACC-450DXA precision surface grinder available for sale. The Okamoto ACC-450DXA is a compact, high-quality hydraulic surface grinding machine designed for accurate flat and form grinding applications in precision engineering, toolrooms, mould and die shops and general manufacturing environments. The machine provides an approximate 450 x 150mm grindable surface, with 530mm longitudinal table travel and 175mm cross travel, making it particularly suitable for precision grinding of small and medium-sized components. The DXA version features an automatic grinding cycle, combining hydraulic table movement with controlled crossfeed and vertical grinding functions to provide repeatable production grinding while remaining straightforward to set and operate. This machine is supplied with a selection of spare grinding wheels. Main Specifications Manufacturer: Okamoto Model: ACC-450DXA Year: 2001 Machine Type: Precision Hydraulic Surface Grinder / Surface Grinding Machine Redpsz Rqk Refx Abuoch Grinding Capacity Maximum Grindable Surface: Approx. 450 x 150mm Table Working Area: Approx. 510 x 150mm Longitudinal Travel: Approx. 530mm Cross Travel: Approx. 175mm Distance from Grinding Wheel to Table: Approx. 60–510mm Maximum Table Load: Approx. 120kg The generous longitudinal movement relative to the 450mm grinding length allows the wheel to clear the component during the grinding cycle. Grinding Wheel & Spindle Grinding Wheel Diameter: Approx. 205mm Grinding Wheel Peripheral Speed: Approx. 2,400m/min Grinding Spindle Motor: Approx. 1.5kW The spindle arrangement is designed for precision surface grinding where good finish, flatness and dimensional accuracy are required. Additional Drive Motors Hydraulic Pump Motor: Approx. 0.75kW Crossfeed Motor: Approx. 0.75kW Grinding Head Up/Down Motor: Approx. 0.4kW DXA Automatic Grinding Cycle The ACC-450DXA version is designed to provide an automatic grinding cycle, making it suitable for repetitive precision surface grinding operations. The DX-series design incorporates features aimed at both rough and finish grinding, including: Automatic grinding-cycle capability Hydraulic longitudinal table movement Powered crossfeed Powered vertical grinding-head movement Coarse and fine vertical feed Precision feed adjustment Robust saddle-type construction Hand-finished precision guideways Automatic lubrication system These features make the ACC-450DXA suitable for both one-off toolroom work and repetitive component grinding. Approximate Machine Dimensions Overall Length: Approx. 1,940mm Overall Width: Approx. 1,317mm Overall Height: Approx. 2,129mm Machine Weight: Approx. 1,250kg

Condition: ready for operation (used), functionality: fully functional, ELB SWN 5 VA / Horizontal surface grinding machine -Grinding area X/Y/Z 525x375x255mm -Magnetic table 700x300mm -Table clamping surface 900x250mm -Table longitudinal travel 10 - 625mm -Table load max. 280 Kg -Table feed rate 1 - 30 m/min -Oscillating grinding 3 - 30 m/min -Distance from table to spindle center 525mm -Vertical feed rate 2 - 180 mm/min -Step size adjustable 0.001 - 2mm -Grinding wheel speed 3000 rpm -Coolant system -Machine feet -Documentation -Complete technical data, see photos Dimensions: L x W x H 2.7 x 2.2 x 2 meters / Weight 3500kg Rcjdoz Sr Umjpfx Abueh Errors and omissions excepted.

Condition: used, Danobat RT 1600 CNC Surface Grinder, Supplied New in 1990 retrofitted to CNC in 2004 with Siemens 802c CNC Control, Magnetic Chuck 1600mm x 710mm, Serial No 114. Max Grinding Length 1600mm, Max Grinding Width 700mm, Max Grinding Height (approx) 920mm, Logitudinal Travel 1700mm, Cross Travel 600mm, Fitted with 500mm Diameter x 50mm Wheel (1220RPM).  Approx Dimensions 5300mm Wide x 2280mm Depth x 3100mm high - Approx Weight 12500kgs Rodpfx Abjw A Sbxouech

Condition: used, Year of construction: 2015, machine/vehicle number: MB536013A, functionality: fully functional, power: 28 kW (38.07 HP), input voltage: 400 V, input current: 54 A, input frequency: 50 Hz, overall weight: 2,800 kg, We are offering this used COSTA MD5CC 1350 belt grinding machine, manufactured in 2015. Model: MD5CC 1350 Serial number: MB536013A Voltage: 400 V Frequency: 50 Hz Power: 28 kW Current: 54 A Year of manufacture: 2015 Total weight: 2800 kg Rcodpfezlcipex Abueh If you have any questions or require further information, please do not hesitate to contact us.

Condition: used, Year of construction: 1987, functionality: limited functionality, machine/vehicle number: 26/708, input current: 5 A, input frequency: 50 Hz, type of input current: three-phase, input voltage: 380 V, We are offering this used Meyer Burger TS23 glass grinding machine, manufactured in 1987. Manufacturer: Meyer Burger Model: TS23 Rcsdpo Afvbcjfx Abueh Year of manufacture: 1987 Condition: used Machine type: glass grinding machine The machine was with us for an overhaul according to the customer's order. Unfortunately, the customer has since become insolvent and can no longer take delivery of the machine. Against this background, the machine is being sold, as we have no use for it. The machine is functioning, but we cannot provide any further detailed information due to the reasons mentioned above. We are offering a very good price and are also willing to consider price proposals. The machine must be removed from our warehouse! All documentation is included. The machine must be collected from our premises after we have received the payment. If you have any questions or require more information, please send us a message or call us.

Condition: excellent (used), Year of construction: 1995, operating hours: 3,372 h, functionality: fully functional, machine/vehicle number: 1562057, input frequency: 50 Hz, type of input current: three-phase, input voltage: 400 V, Bavelloni B73CN vertical edge polishing machine with 7 spindles, in very good working condition. The machine has only completed 36,689 polishing cycles and is fully complete/ready for immediate use. The machine is available immediately. Rcjdpfx Ae Af Ia Rjbush

Condition: ready for operation (used), Year of construction: 1992, functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. Redpfx Abo Adu Swjuech TECHNICAL DETAILS CONTROL Control system: SIDAC system control MAGNETIC CHUCK Magnet dimensions: 1,000 x 500 mm GRINDING WHEEL Grinding wheel diameter: approx. 350 mm MACHINE DETAILS GENERAL Machine type: Surface grinding machine Manufacturer: Minini Model: JMF 1100CN Year of manufacture: 1992 Machine number: 1,000 DIMENSIONS AND WEIGHT Length: 5,000 mm Width: 2,400 mm Height: 2,700 mm Weight: 5,000 kg EQUIPMENT Diaform dressing device Important note: the clamping device shown on the magnetic chuck is not included in the sale and delivery!

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Surface grinding machine Rjdpe Ad Iufefx Abuoch TECHNICAL DETAILS Grinding area Grinding length: 760 mm Grinding width: 325 mm Distance from spindle center to table: 650 mm Grinding wheel Grinding wheel diameter: approx. 500 mm Magnetic chuck Magnetic chuck dimensions: 600 x 500 mm MACHINE DETAILS Manufacturer: Mägerle Type: MGC 180.32 Machine type: Surface grinding machine Machine number: 100369 Dimensions and weight Length: 5,000 mm Width: 3,000 mm Height: 3,500 mm Weight: 15,000 kg EQUIPMENT 2 electro-permanent magnetic chucks Important note: The grinding wheel possibly shown in the pictures is not included in the scope of sale and delivery!

Condition: ready for operation (used), Year of construction: 2002, functionality: fully functional, machine/vehicle number: 3021600302, center height: 230 mm, center width: 2,000 mm, grinding diameter: 355 mm, controller model: Siemens 840 D, TECHNICAL DETAILS Center distance: 2,000 mm Center height: 230 mm Grinding diameter: max. 355 mm Z-axis speed: 0.01–15 m/min Z-axis resolution: 0.5 µm X-axis speed: 0.01–10 m/min X-axis resolution: 0.5 µm External grinding wheel, standard, outer diameter × width × bore: 500 × 80 × 203 mm Grinding wheel peripheral speed: 35 m/s Rcjdpfx As Agfzbjbuoh Surface grinding wheel, standard, outer diameter × width × bore: 400 × 40 × 127 mm Drive power, external grinding spindle: 9 kW Speed, external grinding spindle, adjustable: 600–1,900 rpm Drive power, internal grinding spindle: 2.2 kW Speed, internal grinding spindle: max. 28,000 rpm Speed, workpiece spindle: 0–500 rpm Taper bore, workpiece spindle: MK 5 Taper bore, tailstock center: MK 5 Cylindricity adjustment: +4′ to −4′ MACHINE DETAILS CNC control: Siemens 840 D Total connected power: 25 kW Operating voltage: 400 V Phases: 3 Mains frequency: 50 Hz Total weight: 10,000 kg Operating noise level: 70 dB(A) according to EN 31201

Condition: used, Year of construction: 2000, grinding length: 240 mm, feed length X-axis: 50 mm, feed length Y-axis: 50 mm, feed length Z-axis: 240 mm, grinding width: 300 mm, WEINIG RONDAMAT 970 – Profile and Tool Grinding Machine – Year of Manufacture 2000 For sale is a WEINIG Rondamat 970, year of manufacture 2000, a high-quality automatic profile and tool grinding machine from Michael Weinig AG. The machine is suitable for manufacturing and re-sharpening profile and planing knives, as well as for grinding tools and knife heads. Profile tools can be manufactured manually using a template and then automatically re-sharpened. The machine is also suitable for re-sharpening planing knives in the knife head. Technical Data * Manufacturer: Michael Weinig AG * Type: Rondamat R 970 * Year of Manufacture: 2000 * Machine No.: 91176 * Tool Diameter: 100–300 mm * Max. Tool Width: 240 mm * Grinding Wheel Diameter: 150–225 mm * Grinding Wheel Bore: 60 mm * Grinding Wheel Width: 2 / 3 / 4 / 10 mm * Grinding Spindle Speed: 1,500–3,000 RPM Rjdpfx Aboz Evaloujch * Grinding Spindle Drive: 1.1 kW * Total Connected Load: approx. 2 kW * Coolant Tank: approx. 50 liters * Operating Voltage: 380 V / 50 Hz * Back Angle: 10–30° * Lateral Clearance Angle (manual): 0–20° * Lateral Clearance Angle (automatic): 2.5 / 5 / 7.5 / 10° * Relief Angle for Planing Knives: 60° * Automatic Indexing: up to 16 knives * Precision: Grinding tolerance under 0.005 mm. Suitable for: * Profile knives * Planing knives

Condition: used, Year of construction: 1982, center height: 125 mm, grinding length: 650 mm, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Working area Grinding diameter: 250 mm Grinding length: 650 mm Center height: 125 mm Distance between centers: 650 mm Grinding length in plunge grinding: 80 (100) mm Grinding depth in internal grinding: max. approx. 170 mm Grindable bore: max. 90 mm Workpiece weight: max. 80 kg Distance between workpiece spindle and tailstock center: 960 mm Spindles Internal grinding spindle speed: 9,500–50,000 rpm Grinding wheel diameter: max. 400 mm Spindle bore: 30 mm Workpiece tailstock can be swivelled: 90° Feed and table movement Workpiece table speed: 50–10,000 mm/min Feed rate: 240 mm/min Cooling Coolant consumption: 36 l/min Drive and power Spindle motor drive power: 6.25 kW Connected power: approx. 10 kW Total power consumption: 8.5 kW Machine data Machine weight: approx. 3.4 t Space required: approx. 3.9 × 2.5 × 1.85 m Control and drive Control: Studer Drive: electric / hydraulic Speed control: stepless EQUIPMENT Tailstock with fine adjustment and hydraulic retraction Workpiece tailstock with increased accuracy Rcedpfx Abj Aa Ai Asush Table air lift Hydraulically foldable dressing device Radius dressing device Hydro-cyclone filter Automatic grinding wheel balancing device Automatic dressing cycle with speed compensation Internal grinding device

Condition: used, Year of construction: 1979, functionality: fully functional, Ideal for sharpening lathe tools, drills, milling cutters, and other tools – a classic product of German engineering for ambitious hobbyists or workshop use. Technical specifications: • Motor No. 10651 • Power: 0.55 / 0.92 kW • Speed: 1400 / 2800 rpm • 380 V, 50 Hz • Cross slide with handwheels, swivel head with clamping device Rodpj Afp Enefx Abuoch • Bellows covers for the guides • Incl. work light Please feel free to contact us if you have any questions!

Condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Work Table Table dimensions: 1,100 x 260 mm Number of T-slots: 3 Travel Ranges Travel range X-axis: approx. 500 mm Travel range Y-axis: approx. 400 mm Travel range Z-axis: approx. 400 mm Spindle Speed range: 1,000–5,000 min⁻¹ MACHINE DETAILS General Manufacturer: Dormac Type: FU90 Machine number: 537 Year of manufacture: 1987 Electrical Connection Operating voltage: 380 V Rcodpfx Abe Ad Aqnsush Frequency: 50 Hz Dimensions and Weight Length: 1,500 mm Width: 1,500 mm Height: 1,800 mm Weight: 1,000 kg EQUIPMENT 3-axis digital display ACU-RITE

Condition: used, machine/vehicle number: GB897004, Max. grinding wheel diameter: approx. 250 mm, max. grinding length: 800 mm, with magnetic clamping plate, dimensions: 800 x 400 mm, coolant system, fleece filter system. Rcodpfs Af Nicjx Abujh

Condition: used, workpiece weight (max.): 1,000 kg, total width: 2,700 mm, total length: 5,400 mm, workpiece diameter between centers: 500 mm, workpiece length between centers: 2,500 mm, grinding spindle motor power: 22,000 W, overall weight: 10,500 kg, FORTUNA cylindrical grinding machine Maximum workpiece dimensions: approx. diameter 500 mm x 2500 mm long Control cabinet renewed with frequency inverter for stepless workpiece speed control Rjdo Afwgyspfx Abujch Grinding spindle overhauled Grinding wheel dimensions: diameter 750 / diameter 305 Center bore: MK5 Tailstock: hydraulically operated Various steady rests and grinding wheel arbors Currently in operation and powered on

Condition: used, Year of construction: 2011, functionality: fully functional, grinding length: 500 mm, grinding width: 280 mm, total height: 2,300 mm, total length: 2,130 mm, total width: 1,780 mm, table load: 400 kg, overall weight: 3,000 kg, grinding spindle speed: 1,450 rpm, Grinding length 500 mm Grinding width 280 mm ABA Universal surface grinding machine “Made in Germany” Type 500C Year of manufacture 2011 _____ Grinding length max. (table longitudinal travel 500 mm) Grinding width max. (traverse travel max. 280 mm) Rcedpfxo Agglwj Abujh Magnetic table size 500 x 250 mm Table load maximum 400 kg Grinding wheel dimensions 300 x 50 x 76.2 mm Grinding spindle speed max. 1,450 rpm Grinding spindle drive approx. 5.5 kW Connection: 50Hz – 3x400 V - 50 Hz Weight approx. 3,000 kg Accessories / Special equipment: • ABA’s own program control with touchscreen color display for workshop operation! • Table movement via toothed belt drive, ideal also for fast grinding of smaller workpieces. • Feed (Y) via ball screw drive, linear guides in all axes. • Dresser mounted on the table with automatic dressing cycle including compensation. • Magnetic table EPEFINE2 500 x 250 mm with fine pole spacing and adhesion force control. • Complete enclosure of the working area with electrically monitored sliding doors. • Wet grinding system with separate belt coolant filter and optional oil mist extraction. • Modern LED lighting, various accessories, operating manuals. • Compact design 2,130 x 1,780 x 2,300 mm (plus oil mist extraction). Condition: Good condition! Suitable for all grinding tasks!

Condition: used, Used Matra valve grinding machine with double-cone collets as shown, 380 Volt electric motor fully functional. Please do not send email enquiries! If you have any questions, we are happy to assist you by phone. Viewing and collection only possible by prior telephone appointment! Rjdjz R Nptspfx Abuoch Subject to alterations, prior sale, and errors.

Condition: used, Year of construction: 1980, machine/vehicle number: 46.60, No minimum price – guaranteed sale to the highest bidder! Loading: December 1st to December 10th. TECHNICAL DETAILS Workpiece Area Workpiece length: 310 mm Workpiece width: 150 mm Workpiece height: 210 mm Grinding Spindle Spindle speed: max. 2,800 rpm Distance between grinding wheel and table: 280 mm Spindle overhang: 250 mm Clamping System Magnetic clamping plate: 300 × 150 × 70 mm Type of magnetic clamping plate: Permanent magnet Machine Design Column diameter: 130 mm Performance Data Total power consumption: 1.9 kW Machine weight: approx. 0.58 t Dimensions Space requirement: approx. 0.62 × 0.72 × 1.80 m EQUIPMENT Permanent magnetic clamping plate Rjdpj Aa Nd Tefx Abujch