Used Centre Grinding Machine for sale (66,133)

Condition: good (used), "Self-centering steady rest" by SHW, collet chucking system up to D = 30 mm, hollow spindle stop, semi-automatic operating cycle, heavy HESTIKA cast iron machine as base frame. Islhcdwoyx Dfus Aeia

Condition: new, Centrifugal grinding machine / vibratory grinding machine for deburring, rounding, polishing of workpieces. Machines available with 18, 60 or 160 litres capacity. Machines incl. dosing pump, speed control and control cabinet - separating unit optional. Detailed offer on request. Iolhcdj T Ncmjw Aeia

Condition: used, O F F E R We can offer you ex stock, subject to prior sale and errors: TSCHUDIN (CH) Centerless cylindrical grinding machine Model TC-300 Year of manufacture 2001 Grinding range – Ø 0.5 – 25 mm (30) Max. workpiece length for plunge grinding 125 mm (140) Max. workpiece length for through-feed grinding 300 mm Grinding wheel dimensions: Ø x width Ø 300 x 125 mm (140) Iielhcdwjwftt Us Aoa Regulating wheel dimensions: Ø x width Ø 225 x 125 mm (140) Grinding wheel peripheral speed 35 m/sec Grinding wheel infeed 3 mm Regulating wheel speeds, steplessly adjustable 0 – 444 rpm Regulating wheel inclination Degrees Grinding wheel drive approx. 7.5 kW Total connected load approx. 13 kW – 380 V – 50 Hz Weight 2,500 kg Accessories / Special equipment: • The machine operates with a fixed workpiece position, allowing both the grinding spindle and the regulating spindle units to be adjustable. This simplifies machine setup as well as automatic workpiece loading and unloading. • SIEMENS PLC control for automatic operation with SIEMENS touchscreen. Complete electrics and PLC control renewed in 2016! • Electromechanical profile dressing device for the regulating wheel • Regulating and grinding wheel speeds are steplessly adjustable. • Adjustable plunge guide bridge with mounted plunge workpiece rest • Electromechanically controlled workpiece pusher & automatic pneumatic workpiece ejector • Additional outfeed cylinder for automatic tilting of workpieces after plunge grinding (adjustable 4–30 mm) • Machine is prepared for use with a HELP-TEC bar loader MSHL08/400P, which is currently not present. • Complete enclosure of working area with monitoring technology • Separate control cabinet, operating and electrical manuals for the retrofit Condition: Very good! Fitted with new electronics in 2016! Click here for a video of the machine: Delivery: ex stock, immediately available, FCA Metzingen Payment: strictly net – after receipt of invoice Always a large selection of grinding machines in stock – please inquire for your requirements!

Condition: good (used), Year of construction: 2015, operating hours: 250 h, functionality: fully functional, For Sale: Guideway Grinding Machine (Retrofitted from Metal Planing Machine) We offer a robust guideway grinding machine, which has been professionally converted from an original metal planing machine. The main advantage lies in its relatively compact footprint in relation to the workpiece capacity. Technical Specifications: • External dimensions (LxWxH): 4,800 x 2,500 x 2,000 mm • Required floor space: 4,800 x 3,500 x 2,700 mm (+ control cabinet, coolant tank, access) Iiolhcsxx Uudjdw Aea • Table size: 2,000 x 800 mm • Distance between columns: 1,000 mm • Travel paths (X/Y/Z): 2,000 / 1,000 / 600 mm Upgrades & Features: • New ball screw spindles and bearings • 2 new motors + 2 overhauled motors • 3 new frequency inverters • New Siemens SINUMERIK 802C baseline CNC system • Large grinding spindle: 2,840 rpm – refurbished + new motor • Small grinding spindle: 18,000 rpm – refurbished • Including control cabinet, coolant tank with pump, and separate, wall-mounted inverter for small spindle Inspection and trial run possible by appointment. Please contact us for more information.

Condition: ready for operation (used), Year of construction: 2012, XYZ SLX555 x 3m ProtoTRAK Control Gap Bed Centre Lathe ProtoTRAK SLX Control (2012) Max. Distance Between Centres 3000mm Max. Swing over Bed 560mm Max. Swing over Gap 935mm Max. Swing over Cross slides 350mm Max. Cross slide Travel 290mm Spindle Nose D1-11 Spindle Bore 104mm Spindle Speeds 30 – 1800rpm Spindle Motor 15Hp Quick Change Tool Post Tailstock MT7 Tailstock Dia’ 75mm Tailstock Travel 160m Manufactured | 2012 Dimensions: L x D x H 5220 x 2150 x 1950 mm Weight 7400 kg Supplied with: 3 Jaw Chuck Machine Handbooks TRAKing®. Constant Surface Speed. Rapid Traverse with Joy Stick. QCTP & Holders 2 x Fixed Steadys 15” Interlocking Guards Auto Lubrication. Coolant. Worklight We can offer delivery & installation, operator training and warranties. *For sale with Jet Machinery Ltd* Jet Machinery Stock No: #79024 Machine Serial Number: SLM00035 £47,500.00 + VAT Iislhcoyaywhodw Aea Whilst every effort has been made to ensure that the above information is accurate it is not guaranteed. We advise prospective purchasers to check any vital details. Health and Safety At Work Act 1974: It is not reasonably practical for ourselves as suppliers to ensure that for your application the goods comply with requirements of the Act with respect to guarding etc. Prospective purchasers should ensure that a guarding specialist inspect the goods prior to use.

Condition: excellent (used), Year of construction: 1988, operating hours: 1,000 h, functionality: limited functionality, machine/vehicle number: 99223, overall weight: 2,800 kg, Grinding Dia: min=0.8 to max 250 mm; Vertical stoke : 90 mm; Max. travel of the grinding head :300 mm Table size :320x600 mm; Max stroke of the table Tranversal 250 mm, Longitudinal 400 mm; Electric motor speed 80000 rpm, Pneumatic 180000 rpm. Dimensions 1585x1260x2665 mm, Weight: 2800 kg Ielhjxvccdecdw Aeia

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, machine/vehicle number: MGB1320E, center height: 180 mm, workpiece weight (max.): 100 kg, grinding length: 500 mm, grinding wheel diameter: 400 mm, total width: 14,150 mm, total length: 18,000 mm, total height: 14,750 mm, grinding diameter: 320 mm, workpiece length between centers: 350 mm, grinding wheel width: 50 mm, spindle speed (max.): 3,000 rpm, feed length X-axis: 500 mm, feed length Z-axis: 150 mm, feed rate X-axis: 10 m/min, feed rate Z-axis: 1 m/min, overall weight: 2,100 kg, workpiece spindle speed (max.): 400 rpm, Equipment: rotational speed infinitely variable, Beijing Second Machine Tool Beijing Second Semi-automatic High Speed Cylindrical Grinding Machine MBS1320E On-line production equipment; test machine available; roundness within 0.001 beier machine tool works co ltd Online production equipment Islhcjtr Azksdw Aoia machine testing available The roundness within 0.001

Condition: ready for operation (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: 1834, overall weight: 325 kg, tool diameter: 160 mm, tool height: 230 mm, water tank capacity: 30 l, TECHNICAL DETAILS Maximum tool diameter: 160 mm Maximum tool height: 230 mm MACHINE DETAILS Water tank capacity: 30 L Dimensions & Weight Dimensions (L x W x H): 675 x 765 x 1650 mm Machine weight: 325 kg EQUIPMENT Grinding area made of aluminium Siemens touch-screen operator interface Information display for ongoing operations and alarms Automatic grinding height detection Automatic regulation of working pressure and grinding speed Straight or angled grinding possible Tool drawer High-quality grinding wheel (CBN) Water pistol for cleaning Operating light with different colors Integrated modem with remote connection port Spare grinding wheel Motor with frequency inverter for three-phase 380 V and 220 V power Iiolhcsyx Hwtsdw Aja

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 2449-01, grinding width: 1,350 mm, grinding height: 150 mm, feed rate X-axis: 12 m/min, grinding wheel diameter: 1,380 mm, TECHNICAL DETAILS Workpiece dimensions (length x width) min.: 30 x 30 mm Workpiece dimensions (width x height) max.: 1,350 x 150 mm Abrasive belt dimensions: 1,380 x 1,900 mm Disk diameter: 1,380 mm Abrasive belt unit speed: 8–22 m/s Disk unit speed: 10–22 m/s Feed rate (frequency-controlled): 2–12 m/min MACHINE DETAILS Electrical specifications Feed motor (frequency-controlled): 2.6 kW Abrasive belt (W): 18.5 kW Disk (RD): 12.9 kW Electrical connections: 400 V Frequency: 50 Hz Control current: 110 A EQUIPMENT Disk unit (RD) with abrasive fleece disc Iislhcdsyx Hhxow Aoa 2 abrasive belt units (W) placed before and after the disk unit

Condition: ready for operation (used), Year of construction: 2021, functionality: fully functional, grinding length: 1,600 mm, grinding width: 500 mm, workpiece weight (max.): 900 kg, grinding wheel diameter: 355 mm, rapid traverse X-axis: 1 m/min, travel speed (max.): 25 mm/min, TECHNICAL DETAILS Ijlhcjyymkcsdw Ajia Table size: 500 x 1,600 mm Max. grinding area: 500 x 1,600 mm Max. distance from spindle center to worktable: 600 mm Load capacity (with magnetic chuck): 900 kg Axis parameters Longitudinal feed speed: 5–25 m/min Cross rapid traverse (X-axis): 50–1,000 mm/min Cross feed, incremental: 1–20 mm/stroke Cross hand feed (MPG): 0.005 mm/click Vertical rapid traverse (Z-axis): 50–500 mm/min Vertical automatic feed: 0.005–0.04 mm/stroke Vertical hand feed (MPG): 0.005 mm/click Grinding wheel Dimensions (outside diameter x width x bore): 355 x 20~50 x 127 mm Spindle speed: 1,440 rpm Drive capacities Spindle motor: 7.5 kW Hydraulic pump motor: 3 kW Servo motor, cross feed: 0.5 kW Servo motor, vertical feed: 2 kW Coolant pump: 0.125 kW Lubrication pump: 0.06 kW Total connected load: 14 kVA MACHINE DETAILS Dimensions & weight Required installation space: 7,120 x 2,550 mm Height: 2,700 mm Machine weight: approx. 6,000 kg EQUIPMENT PLC + HMI automatic grinding control Integrated control for magnetic chuck Coolant tank Balancing arbor Grinding wheel flange and puller Wheel dresser stand MPG handwheels for Y/Z axis Operating manual Splash guard Standard grinding wheel Levelling wedges and bolts

Condition: ready for operation (used), functionality: fully functional, grinding wheel width: 100 mm, grinding wheel diameter: 350 mm, overall weight: 2,000 kg, The machine was retrofitted and modernised in 2025. The modernisation includes the addition of automatic loading and automatic cycle functions. The user interface and control panel are available in English, German, and French. TECHNICAL DETAILS Grinding wheel dimensions (outer diameter x inner diameter x width): 350 x 127 x 100 mm Grinding wheel width: 100 mm Grinding wheel speeds: Infinitely variable Regulating wheel speed: 10 - 250 rpm Feed: Automatic Regulating wheel dimensions (outer diameter x inner diameter x width): 230 x 76.2 x 100 mm Regulating wheel width: 100 mm Maximum length to be straightened: 200 mm Workpiece diameter to be straightened: 1.5 - 50 mm MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): 1,800 x 1,300 x 1,600 mm Weight: 2,000 kg EQUIPMENT New coolant tank with paper filtration system Islhcdweyym Emo Aoia

Condition: used, Year of construction: 1989, GER MACHINE TOOLS Iijlsy Du N Ujhcdw Aja MADE IN SPAIN HORIZONTAL SPINDLE SURFACE GRINDING MACHINE TABLE SIZE: 1300.0mm x 550.0mm MAGNETIC CHUCK SIZE: 1000.0 X 600.0mm COMPLETE WITH: ELECTROMAGNETIC CHUCK

Condition: used, Model: CW Serial No: 26520 Capacities: Maximum Swing Over Bed: 430mm Maximum Distance Between Centres: 2500mm Wheel Dimensions: 660x 75mm Work Head Speeds: (3) 20 – 160rpmrpm Wheel Head Speeds: 735rpm Table Swivels: Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 975rpm Iioloyx Hx Djhcdw Asa Work Head: 3HP 1120rpm Complete With: 2 No 2 Point Open Steadies Complete Tailstock Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 6,750 x 2000 x 1800mm Approximate Weight: 9,000kg

Condition: used, Model: D Serial No: 20829 Capacities: Maximum Swing Over Bed: 508mm Maximum Distance Between Centres: 4572mm Iielhcdjyx Hw Tew Aea Wheel Dimensions: 660x 75mm Work Head Speeds: (8) 22 – 129rpm Wheel Head Speeds: 735rpm Electrics: 415v, 3ph, 50 Cycles Motors Wheel Head: 20 HP 960rpm Work Head: 4HP 1440rpm Table Motor: 3HP 950rpm Complete With: 4 No 2 Point Open Steadies Complete 3 No 2 Point Steadies Incomplete Table Mounted Wheel Dressing Attachment Coolant Approximate Dimensions: 13,000 x 2500 x 1800mm Approximate Weight: 19,000kg

Condition: good (used), Year of construction: 1984, Used TOS KAMENICEK model BUC63A x 3000 Universal cylindrical grinding machine. YEAR OF MANUFACTURE: 1984. MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION Max Swing 630 mm Distance between centres 3000 mm Workhead swivel – towards wheelhead only 90 deg. mm Work spindle bored taper No. 6 M.T. Length of stroke of tailstock barrel 70 mm Tailstock barrel taper No. 6 M.T. Spindle nose clamping Din 55021 Swivelling of wheelhead + 30 deg – 10 deg Length of adjustment by re-circulating ball screw 290 mm Iislhceh U Rznodw Aoa Additional length of adjustment 250 mm Length of rapid feed 90 mm Length of infeed setting per each rev. of handwheel, measured on work diameter 0.5 mm Grinding wheel dia. X width X bore 750 x 80 x 305 mm Min. dia. of worn grinding wheel 570 mm Max. face width of grinding wheel 125 mm Rate of table traverse – steplessly variable 0.5-0.6 m/min Table traverse per 1 rev of handwheel 8 mm Swivelling of table +/- 5 deg. Max. permissible weight of work between centres 2500 kg Max. permissible weight of workpiece in chuck with overhang. (including weight of chuck) 150 kg Wheel spindle speeds (2) 840,970 rpm Grinding wheel surface speed 33 m/sec Work spindle speeds – int. var. in 2 ranges 8-50, 50-315 rpm Drive – total power required rated 31 kva Output of workhead motor 3 kw Output of wheelhead motor Electrics 15 kw 415V ,3Ph,50Hz Equipped with:- Additional wheel flanges, coolant system with clarifier and splash guards. FEATURES AND EQUIPMENT – Swivel Round Internal Grinding Attachment

Condition: like new (used), Year of construction: 2020, functionality: fully functional, operating hours: 1,500 h, USED Akira Seiki 1600XP Fanuc 0iMF Open Fronted Vertical Machining Centre with Fanuc Ex Stock - Subject to Prior Sale. Iolhcdou A U Nkow Aoia YOM 2020, Machine with Very Low Hours Usage. Approx 1500 Hours  12,000 RPM Spindle with Refrigeration System  36 Station Arm Type ATC  Full Splash Guard  Fully Integrated Detron GXA-255h 4th Axis Nc Rotary Table with SR255H Tailstock Support Unit  Chip Conveyor & Chip Bin (Scraper Type)  Chip Flushing System Including Coolant Wash Gun  Through Spindle Coolant System - 35 Bars with Filter  Fanuc Memory Extension - 2 Mb  Fanuc 10.4 “ Screen with Manual Guide-I  Coolant Tank Capacity - 640 Litres  THK Heavy Duty Linear Guideways  Manual Pulse Generator  3 Colour Signal Lamp  Automatic Lubrication System  Rigid Tapping & Helical Interpolation Function TABLE Working Surface 1,750 X 800 MM Tee Slots 18 x 125 x 6.0 MM Spindle Nose to Table 100 ~ 915 MM Spindle Centre to Column 865 MM Table Load Capacity 2,300 KGS TRAVEL X-Axis Travel 1,630 MM Y-Axis Travel 850 MM Z-Axis Travel 815 MM SPINDLE Spindle Nose Taper BT-40 Spindle Speed - Max 12,000 RPM FEED Rapid Traverse (X & Y-Axis) 33 M / MIN Rapid Traverse (Z-Axis) 25 M / MIN Cutting Feedrates - Max 12 M / MIN ACCURACIES Positioning 0.01 MM Repeatability + - 0.003 MM ATC Tool Storage Capacity ARM TYPE - 36 STATIONS Maximum Tool Weight 7.0 KGS Tool Diameter - Max 75 MM Tool Length - Max 250 MM Tool Shank BT-40 Tool Exchange Time 2.2 SEC MOTOR Spindle Drive Motor (FANUC) 18.5 KW POWER SUPPLY Voltage 415V / 3PH / 50HZ Power Requirement 30.0 KVA MACHINE DIMENSIONS Machine Floor Space Requirement 4,820 x 3,576 MM Machine Weight 12,600 KG

Condition: as good as new (ex-display), Year of construction: 2021, machine/vehicle number: 100000997, operating hours: 50 h, CONDITION LIKE NEW. OPEN FRONTED VERTICAL MACHINING CENTRE WITH 4 SHEAR HARDENED & GROUND BOX GUIDEWAYS, ENHANCED ACCURACY & CUTTING PERFORMANCE. TABLE Working Surface - 1,150 X 600mm Tee Slot (Size x Number x Pitch) - 18mm X 5 X 120mm Maximum Table Load - 700 kg TRAVEL Longitudinal Travel ( X-Axis) - 1,000mm Cross Travel (Y-Axis) - 600mm Iiolehzxwkehcdw Aea Vertical Travel (Z-Axis) - 630mm Distance from Table Nose to Table Top - 100 – 730mm Distance from Spindle Centre to Column - 650mm SPINDLE Spindle Nose Taper BT-40 Spindle Speed - PULLEY DRIVEN (STD.) - 8,000 RPM GEAR DRIVEN - 6,000 RPM FEED Cutting Feedrate - 12 M / Min Rapid Traverse (X and Y-Axis) - 20 M / Min Rapid Traverse (Z-Axis) - 20 M / Min ATC Tool Storage Capacity - S TYPE 20 (STD.) Tool Change Type - RANDOM Maximum Tool Weight - 6 kg Maximum Tool Diameter - S TYPE Ø95mm Maximum Tool Length - S:250mm Tool Shank - BT-40 Pull Stud Bolt - MAS P40T-1 MOTOR Spindle Drive Motor (Fanuc) (30 min) - 7.5 (STD.) kW ACCURACY Positioning - ± 0.005mm Repeatability - ± 0.003mm POWER SUPPLY Electric Power Consumption - 20 KVA Air Pressure - 6.5 KG / CM² Voltage - 415V / 50HZ / 3PH MACHINE Floor Space (Fully Guarded) - 2,900 X 2,640mm Height - 2,890mm Weight - S: 6,500 / A:6,700 kg FANUC 0IMF PLUS CNC STANDARD SUPPLIED MACHINE FEATURES • Fully Enclosed Splash Guard • Work Lamp • Spindle Air Curtain • Air Blast Through The Spindle • Automatic Lubrication System • Levelling Bolts And Blocks • Coolant Jets Around The Spindle • Operation And Programming Manuals • Tool Box • Electrical And Mechanical Manuals • Operation Finish Lamp • Automatic Power Off • Cooling System • Heat Exchanger In Control Panel

Condition: ready for operation (used), Year of construction: 2000, functionality: fully functional, REFORM AR 101/61 Blade grinding machine available immediately. 8100mm grinding length Iislhcdsygvluew Aoa Please contact us for more information.

Condition: used, Year of construction: 2004, Lot consists of: (1) CNC Horizontal Double-Disc Surface Grinder Iolheym Tuaocdw Aeia Technical Details: grinding wheel diameter x width 762 x 220mm, MARPOSS E3 in-process measuring system, CNC FANUC 210i-MB, 400V 50Hz 97kW, weight approx. 13 tons

Condition: ready for operation (used), Year of construction: 2016, operating hours: 39,293 h, Movement X-Axis Movement 711 mm Y-Axis Movement 406 mm Z-Axis Movement 394 mm This 3-axis HAAS DM-2 vertical machining center was manufactured in 2016. It features extensive use with 39,293 power-on hours, 11,081 cycle start hours, and 6,377 feed cutting hours. The machine offers a travel range of 711 mm on the X-axis, 406 mm on the Y-axis, and 394 mm on the Z-axis. Consider the opportunity to buy this HAAS DM-2 vertical machining center. Contact us for more information. Ijlhcsx D Dzwsdw Aeia Application Types Milling

Condition: ready for operation (used), Year of construction: 1998, Main Drive Number of axis 3 Spindle Speed 12000 RPM Tool taper BT 40 Movement X-Axis Movement 560 mm Z-Axis Movement 510 mm Y-Axis Movement 510 mm This 4-axis MORI SEIKI SH400 was manufactured in 1998. A robust twin pallet horizontal machining center from Japan, it features a 12,000rpm spindle, BT40 tool taper, and a 60 tool position magazine. Additional attributes include a 1-degree indexing table and a chip conveyor. If you are looking to get high-quality machining capabilities consider the MORI SEIKI SH400 machine we have for sale. Contact us for more information about this machine. Application Types Iiolhcdox D H T Ajw Aoa Milling

Year of construction: 2019, condition: ready for operation (used), This 5-axis COSMEC CONQUEST 515/13 was manufactured in 2019. A robust CNC Wood Machining Centre, it features a working area of 6210 × 1650 mm, dual motorization on a closed gantry structure, and a spindle power up to 18 kW. It supports tool changes with multiple configurations and is compatible with ALPHACAM and ASPAN software. Consider the opportunity to buy this COSMEC CONQUEST 515/13 CNC Wood Machining Centre. Contact us for more information about this machine. Application Types CNC Wood Machining Iislhcjx S Si Iodw Aja

Condition: ready for operation (used), Year of construction: 2023, This 5-axis DMG MORI DMP-70 was manufactured in 2023, featuring a Siemens 840D sl control and a BBT30 direct-drive spindle with a maximum speed of 24,000 rpm. It includes a 25-tool ATC and coolant through spindle at 40 bar. Ideal for high-speed, 5-axis machining with its integrated swivel rotary table. If you are looking to get high quality machining capabilities consider the DMG MORI DMP-70 machine we have for sale. Contact us for more information about this machine. Application Types Iolhcjx D H Hijdw Aeia Milling

Condition: excellent (used), Year of construction: 1998, Erwin Junker BUAJ BN29C CNC Universal Cylindrical Grinder Excellent condition Can be viewed underpower and demonstrating if you wish to visit. Year 1998 Fanuc series 35i CNC Control Ijljyvupxjhcdw Aeia Weight 2800kgs Dimensions approx 3000mm x 1850mm x 1800mm Specification - Distance between centres - 800mm Centre table clearance 150mm Work piece weight between centres, max 120kg Machine working capacity IT4 ISO Wheelhead Grinding wheel, max diameter - 400mm Grinding wheel, max, width - 63mm Grinding wheel, clamping diameter - 127mm Motor power - 5.5kW Grinding wheel, max. peripheral speed - 45m/s Wheel head, path of adjustment - 300mm Wheel head, adjustment angle - +45°/-15° Workhead Spindle taper - MK5 Spindle, stepless speed control - 23-291 or 56- 700rpm Work head, adjustment angle - 90° Tailstock Taper - MK4 Tailstock barrel, stroke 30mm Taper ratio, fine adjustment +/-0.15mm Longitudinal feed Table travel 756mm Table, working travel speed 0÷7.5m/min Top table, swiveling +/8°30

Condition: used, Year of construction: 2007, Mazak Nexus HCN 6000-II Twin Pallet Horizontal Machining Centre. S/No. 196442 (2007) with Mazatrol Matrix Nexus Control, Pallet Size 500 x 500mm, 60 Position ATC, High Pressure Coolant & Filtration System, Through Spindle Coolant, Spindle Speed 7000rpm, Spindle Taper CAT40, Rinishaw Tool Setter, Swarf Conveyor. Please Note: Back-End Spindle Tool Holders Only, Consumable Tools Not Included. Country of Origin: Japan Ioljyzhfdehcdw Aeia Location: This lot is located in Bornago, Italy. There are no loading facilities onsite, dismantling and loading will be at the cost of the purchaser. All/Any tooling is being offered as specifically described.