Used Cam Milling Machine for sale (97,825)

Condition: good (used), Year of construction: 2016, BG Cam 1325 ATC, Year of manufacture 2016, Siemens 808 D control system, Travel X/Y/Z 1270/2540/150 mm, Gkedsuhzyqopfx Ag Nec High pressure vacuum table, Table with 4 zones, Yaskawa servo motor drive, rapid traverse X/Y 35 m/min, rapid traverse Z 15 m/min, Resolution 0.001 mm, repeat accuracy 0.01 mm, Spindle speed up to 24,000 rpm, new spindle 2024, ER 25, 6-station tool changer, linear guides, tool length measurement, vacuum pump, suction foot,

Condition: used, Year of construction: 2014, X-travel: 1250mm, y-travel: 1280mm, z-travel: 150mm, max. feed rate: 15m/min, repeat accuracy: 0.01mm, spindle rotational speed: 0-24,000/min, software: VCarve Pro, data formats: HPGL-3D / G-Code, spindle power: 6.5kW, controls: Siemens Sinumerik 808D Milling, weight: 1.2t, with collet spindle, Phenol vacuum high-pressure table, 850W servo motors Yaskawa, steel base, precision ball screws in all axes, x-axis with dual drive, linear guides, protective cover for all drive axes, suction foot for chip extraction, automatic spray cooling and material sensor. Gksdpfowqd Rhsx Ag Njc

Year of construction: 2005, condition: ready for operation (used), Table dimensions: 4000x2000mm, connected load: 11kW. Gksdjfdr Iispfx Ag Njc

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration Gjdohwd Dnjpfx Ag Nskc - Each machine design is verified and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: used, Year of construction: 1995, CAMAM GC6/6F-2L rotary milling machine Godpfx Agsur Htle Nekc Number of milling units 6, grinding units 2 Maximum width of material 250mm The maximum height of the material 150mm Maximum length of material 1200mm Feed speed adjustable 0-17m/min Machine in the cabin

Condition: excellent (used), Year of construction: 2018, CNC control: Fanuc Series Oi-MF New machine, only 150 spindle hours - Flat guideways - Gearbox Gkjdpfxowa Ip Hj Ag Nec - Internal cooling - Various tool holders and 1 vise Travel paths X-travel 850 mm Y-travel 530 mm Z-travel 530 mm Spindle nose (to table surface) 100-630 mm Spindle axis to column surface 590 mm Table Table size 530 x 950 mm Maximum table load 800 kg T-slots (W x NO. x P) 18 x (5) x 100 mm Spindle Spindle speed 8000 rpm Spindle mount BT-40 Spindle power 7.5/11 kW Feed rate Rapid positioning speed 20 / 20 / 20 m/min. Cutting feed rate: 1 – 10,000 m/min. Automatic tool changer Number of tools: 24 Tool taper: BT-40 MAS Tool holder bolt: P-40T (45°) Max. tool diameter: Ø 80 mm Max. tool diameter (no adjacent tool): Ø 150 mm Max. tool length: 250 mm Max. tool weight: 7 kg Tool change time (tool to tool): 2.5 sec Tool change time (chip to chip): 6 sec Machine dimensions: Floor area: 2450 x 2700 mm Machine weight: 6000 kg Max. machine height: 2900 mm Air supply connection: 7 kg/cm2

Condition: used, Year of construction: 1997, operating hours: 60,000 h, functionality: fully functional, machine/vehicle number: 76, workpiece weight (max.): 20 kg, power: 70 kW (95.17 HP), total length: 6,000 mm, total width: 3,500 mm, total height: 2,300 mm, input voltage: 400 V, air pressure: 6 bar, suction capacity: 12,000 m³/h, 1) Camam machine 1997y - 2x inside x 2x outside moulder (11kW motor) - 2x inside x 2x outside paper sanding (5kW motor) total power 74 kW 2) Camam machine 2002y - 2x inside x 2x outside moulder (11kW motor) - 1x inside x 1x outside paper sanding (5kW motor) total power 60kW Machine suitable for bended elements (ex backrests), narrow longitudinal elements (legs), pieces height 120 mm, depth 65mm, rotation speed 8m/min Godpfjv Unhgsx Ag Nekc

Year of construction: 2020, condition: as good as new (ex-display), Machine data - Moving gantry with fixed table and moving gantry for minimum footprint - Substructure, bridge and bridge uprights made of steel and welded, stress-relieved and machined in one piece - Main machine assemblies consisting of ribbed welded structures, tuned for optimum stiffness/weight ratio as well as vibration damping and high acceleration - Each machine design is reviewed and optimized using finite element analysis (FEA) to ensure maximum quality, performance and safety - Easily accessible machine table for easy loading and unloading with a forklift or overhead crane - Ground precision guides with high preload and additional cover belt for optimum chip wiping on all axes Gkjdpfohwd Eajx Ag Nsc - Brushless, digital A/C servo motors and controllers on all axes - Double-sided, synchronized drive on X-axis (gantry drive) - Rack and pinion drive on X and Y axes - Precision ball screws with double-sided plummer block units on Z-axis - Precision planetary gears with low backlash - Cable drag chains in closed design to protect the drag chain cables against chips and dust - High-quality shielded drag chain cables provide a high level of safety against malfunctions and failures - Working range X-axis 2,550 mm - Working range Y-axis 1.550 mm - Z-travel 200 mm - Z-travel 280 mm - Web speed Max. 80 m/min. - Network connection via Ethernet

Condition: used, Year of construction: 2006, functionality: fully functional, Description Headstock and tailstock manually adjustable. Ideally suited for machining one crankshaft type with different strokes. Workpiece Max. center-to-center distance of the outer main bearings: 920 mm Max. roll arm length (½ stroke + counterweight radius): 195 – 270 mm Max. number of machineable bearings: 8 main bearings, 6 pin bearings Main bearing diameter, min. / max.: 30 / 88 mm Pin bearing diameter, min. / max.: 30 / 84 mm Bearing width, min.: 18.5 mm Stroke, max.: 140 mm Bearing pitch, min.: 29.5 mm Deep rolling machines Max. deep rolling force: 30,000 N Headstock Main drive motor power: 20 kW Deep rolling speed: 120 rpm / 60 rpm Leveling rolling speed: 30 min¯¹ Gkjdpfx Aowm Elfjg Nsc Machine Weight including auxiliary units: approx. 13,800 kg Dimensions including integrated control cabinet and hydraulics (L/W/H): approx.: 4.5 x 2.5 x 2.2 m Max. machining height: 1,100 mm

Condition: good (used), Year of construction: 2018, Table 1473 x 305mm, Traverses XYZ: 1000 x 410mm x 400mm (knee), quill travel 127mm, Spindle Taper ISO40, Power Drawbar, Spindle Motor 5HP, Spindle Speeds 70 - 3600rpm, Prototrak SMX CNC Control, Godjxftqdopfx Ag Nskc

Condition: used, Manufacturer : CAM Gkjdpfxevzh Tio Ag Noc Model: AV65 Type: automatic vertical cartoner   Product insertion : manual or automatic (requires modification) Leaflet insertion : available Covers and safety devices Vacuum pump Single shot action module Production speed: 15 – 70 packs per minute Case formats : A – Width: 20 – 115 mm B – Length: 15 – 70 mm C – Height: 50 – 190 mm   Video: ?si=7gBIqcD_U4OJ55p3   Paper documentation available

Condition: used, Year of construction: 1999, functionality: limited functionality, machine/vehicle number: 990001, feed length X-axis: 800 mm, feed length Y-axis: 500 mm, feed length Z-axis: 500 mm, travel distance X-axis: 800 mm, travel distance Y-axis: 500 mm, travel distance Z-axis: 500 mm, feed rate X-axis: 5 m/min, feed rate Y-axis: 5 m/min, feed rate Z-axis: 5 m/min, spindle speed (max.): 8,000 rpm, spindle speed (min.): 50 rpm, total height: 2,300 mm, total width: 2,000 mm, table height: 850 mm, table load: 500 kg, overall weight: 3,000 kg, input voltage: 380 V, space requirement width: 2,000 mm, space requirement length: 2,500 mm, space requirement height: 2,300 mm, input frequency: 50 Hz, For sale is a solid and proven CNC milling machine, model Strathclyde SMT850, equipped with a user-friendly Heidenhain CNC control system. The machine is ideally suited for precise milling operations in workshops or small-scale production lines and has been regularly maintained. It is in excellent technical condition and ready for immediate use. This offer includes: - CNC machine including Heidenhain operator console with MPG - Tool carousel & clamping devices Gksdpfx Agsxl Ttre Njc - Tool set: milling cutters, drills, dial indicator - Integrated coolant pump The machine can be inspected by appointment.

Condition: new, functionality: fully functional, machine/vehicle number: RM310119, feed length X-axis: 787 mm, feed length Y-axis: 508 mm, feed length Z-axis: 584 mm, quill diameter: 105 mm, table width: 355 mm, table length: 1,372 mm, type of input current: three-phase, rotational speed (max.): 5,000 rpm, rotational speed (min.): 40 rpm, table load: 600 kg, overall weight: 2,390 kg, input voltage: 400 V, workpiece weight (max.): 600 kg, warranty duration: 12 months, input current: 22 A, input frequency: 50 Hz, Built-in programming cycles: Position: Spindle positioning Drilling: Simple holes, holes on a circle Milled holes: Holes made by milling cutter – straight and circular Gedpfx Aowtnxnog Njkc Arcs: Arcs in XY, XZ, and YZ plane Pockets: Rectangular, circular, irregular Island: Milling rectangular, circular, and irregular islands Profile: Rectangular, circular, irregular Helix: Spiral ramping Milling: Straight lines along X, Y, or Z axis or any combination Engraving: Text engraving Thread cutting: Thread cutting with tap Thread milling: Thread milling with form cutters Copying: Copying a series of cycles Mirror: Mirror image Rotation: Rotation around an axis Repetition: Repetition of a series of cycles G-code editor Clipboard

Condition: ready for operation (used), Fanuc 6-assige robotfreescentrum voor aluminium en staal X-beweging van de robot: 10 500 mm Uitgebreid armbereik van de robot (links en rechts): 3045 mm maximale werkstuklengte als het een profiel is: 15 meter max. werkstukgrootte zonder verlengde armbereik: 10 500 x 3045 mm Gksdpfx Agsv Sfk Hj Nec max. werkstukhoogte: 3500 mm Gereedschapswisselaar met 13 posities: - 12 aangedreven gereedschappen - 1 meetsonde Freeskop: -SK40 - 12 kW op spindel / 16 000 tpm - automatische smering Er zijn veel configuraties mogelijk, afhankelijk van het type werkstuk. Momenteel zijn er twee aparte werkgebieden, maar u kunt dit aanpassen naar één werkgebied (voor een groot werkstuk) of opsplitsen in meerdere aparte werkgebieden voor kleinere werkstukken.

Condition: used, Year of construction: 2020, functionality: fully functional, machine/vehicle number: 19090103008, Equipped with a milling spindle for 3 axes. Additionally fitted with an oscillating tangential knife, upgraded for a fourth axis (rotary axis). Furthermore, two additional tools are installed for performing 45° miter cuts along both X and X axes. Ideal for applications such as acoustic materials, foam materials, PU foam panels, cardboard, etc. Max. knife length: up to 120mm, shank diameter: 6mm. Dimensions: - 2200 x 3600 mm - Travel width (dome): 2440 x 3600 mm Gjdjwx E Tgjpfx Ag Njkc Working area for the oscillating knife: - Y direction: 3100 mm - X direction: 2100 mm Working area for the spindle (4.5 kW): - Y direction: approx. 3000 mm - X direction: approx. 2000 mm - Clearance: 200 mm Vacuum table size: 2020 x 3100 mm The machine features a 6-zone vacuum table and a water-cooled pump with a power rating of 5.5 kW (pump dimensions: 1200 x 800 x 1000 mm – to be set up separately). Total machine weight is approx. 1.85 t. - Rack and pinion drive - Oil lubrication system - Stepper motors (step by step) - Spindle speed max. 24,000 rpm – high-frequency, water-cooled - Dust extraction connection Included in delivery is a complete workstation including CAD/CAM software in German, PC, monitor, and keyboard, all ready for immediate operation. Various tools and spare parts are also included. The machine has been in use since 01/2020 for acoustic material processing and has been regularly maintained. Price: €12,500.00 (excl. VAT), without delivery and installation. The machine is disassembled and ready for collection.

Condition: used, Automatic continuous cartoner CAM HF 77-8 Refurbished by the manufacturer in 2004. A size range: 20mm to 70mm Size range B: 12mm to 70mm C format range: 50mm to 200mm ; Format range A + B max: 140mm Gedpfevlyxxjx Ag Nokc Distribution of leaflets. Previous use: packaging of syrup bottles. History, documentation and wiring diagram available; Spare parts available.

Condition: used, Year of construction: 2008, Manufacturer : CAM Godpfx Agsvlyn He Nokc Model: AP Year : 2008 Type : Intermittent motion overwrapper Materials: Polipropilene, PVC, cellophane. Feeding: automatic or manual. Mechanical speed: 31 – 100 strokes / minute. Format : Length (A): 35 – 150 mm Height (B): 15 – 80 mm Width (C): 60 – 300 mm Chuck: Ø 70 – 76 mm Roll: max. Ø 320 mm Width: 100 – 400 mm

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, travel distance X-axis: 5,000 mm, travel distance Y-axis: 2,800 mm, travel distance Z-axis: 1,500 mm, table length: 4,000 mm, table width: 2,000 mm, No minimum price – guaranteed sale to the highest bidder! Godpfx Aoxfiazsg Nskc TECHNICAL DETAILS X-axis travel: 5,000 mm Y-axis travel: 2,800 mm Z-axis travel: 1,500 mm Table length: 4,000 mm Table width: 2,000 mm Max. table load: 20,000 kg Spindle speed: 20 – 3,000 rpm Spindle power S1 = 100%: 30 kW Spindle power S3 = 60%: 35 kW Max. spindle torque: 1,250 Nm at 226 rpm Tool holder: ISO SK50 Number of tool changer positions: 100 Milling Head Automatic milling head: Index 2.5° Straight milling head: Index 1.0° Feed Rate Working feed rate: 2 – 5,000 mm/min Rapid Traverse X-axis: 12,000 mm/min Y-Z-axis: 15,000 mm/min MACHINE DETAILS Control: HEIDENHAIN TNC426CB Dimensions (L x W x H): 9,800 x 6,200 x 7,100 mm Machine weight: approx. 31,600 kg

Condition: ready for operation (used), Year of construction: 1996, functionality: fully functional, table width: 520 mm, table length: 900 mm, overall weight: 4,500 kg, controller manufacturer: Heidenhain, TECHNICAL DETAILS Table size: 900 x 520 mm MACHINE DETAILS Control: Heidenhain Installation dimensions LxWxH: 3.16 x 3.62 x 2.37 m Weight: 6,000 kg Godpfx Agexl Sy Ds Nokc Electrical data Operating voltage: 400 V / 3~ Mains frequency: 50 Hz Control voltage: 24 V Total rated current: 23 A Total power: 16 kVA Weight: 4,500 kg

Condition: refurbished (used), Year of construction: 1974, Forest CNF 160 CNC Boring and Milling machine (1974, retrofitted in 2004) Gsdjxnc Rlspfx Ag Nekc Machine – CNC Axes: X (Column Saddle travel) 12,500 mm, Y (Headstock Saddle Vertical travel) 3,500 mm, Z (Boring Shaft travel) 1,250 mm, W (Quill travel) 1,000 mm, W+Z (Cumulative travel) 2,250 mm. Rotary Table – CNC Axes: W2 (Table travel) 3,200 mm, B (Table rotation) 0–360°. Rotary Table Surface: 2,500 x 3,500 mm. Rapid Feed Axes: X max. 5,000 mm/min, Y max. 5,000 mm/min, Z max. 3,000 mm/min, W max. 3,000 mm/min, W2 max. 2,000 mm/min, B max. 1 rot/min. Work Feed Axes: X 1–2,000 mm/min, Y 1–2,000 mm/min, Z 1–1,000 mm/min, W 1–1,000 mm/min, W2 1–200 mm/min, B 0.1–1 rot/min. Milling Spindle Range (S – Gearbox with 4 mechanical ranges): Range #1 2.5–80 rpm, Range #2 80–160 rpm, Range #3 160–320 rpm, Range #2: 320 - 630 rpm. Boring shaft taper bore: ISO 50, Boring shaft diameter: 160 mm. FANUC 18M Contouring Numeric Control. FANUC made feed axes motors. FANUC made spindle motor. FANUC made drive system for axes and spindle motors. Overall size: W x H x L = 14,000 x 10,000 x 20,000mm. Machine weight: approx - 85,000 kg. Oil Chiller: Schimpke Model DK38-V from 1999. Coolant System: Yes. Chip Conveyor: No

Condition: good (used), Year of construction: 2008, Traverses X Y Z: 3000 x 1300 x 2000mm, Table 2000 x 1600mm, table load 13,000 kgs, B axis 360 degrees, Heidenhain iTNC530, ISO SK50 spindle taper, 5,000rpm Spindle Speed, 60 station toolchanger, coolant, Interlocked guards. Gksdjvz A Riepfx Ag Njc

Condition: excellent (used), Year of construction: 2012, travel distance X-axis: 8,000 mm, travel distance Y-axis: 3,100 mm, travel distance Z-axis: 1,600 mm, feed rate X-axis: 25,000 m/min, feed rate Y-axis: 25,000 m/min, feed rate Z-axis: 25,000 m/min, spindle speed (max.): 4,000 rpm, table length: 8,000 mm, table width: 2,500 mm, table load: 15,000 kg, Chain ATC Tool changer 80 positions Rotary table 1500 x 1500 with V-Axis 1500 mm Table load 15.000 Kg Optional Box table 3500 x 1000 x 1000 mm Under power X-Axis: 8000mm Y-Axis: 3100mm Z-Axis: 1600mm Table Length: 8000mm Table Width: 2500mm Table load: 15000 Power on spindle: 43kW Spindle speeds: 4000Rpm Spindle Taper: 50ISO/Bt/Mk Feed rate X-Axis: 25000mm/min. Feed rate Y-Axis: 25000mm/min. Feed rate Z-Axis: 25000mm/min. Control: iTNC530 Millinghead auto-index:2.5 x 2.5° Length: 14000mm Width: 6000mm Height: 6000mm Gkodexm Sudspfx Ag Noc Weight: 68000kg

Year of construction: 2012, condition: used, Serial number: AKS20xxxx Please contact ATS Norway for more information Please provide reference number upon request: 20322 Description: Gsdjwi Rpbopfx Ag Nskc We have a 2012 Bobcat Asphalt Mill for skid steer loader for sale. Owner says it works as it should. Some rust on tilt cylinders. So some additional cost must be expected. Has a milling width of 50 cm. Ready for delivery

Condition: ready for operation (used), functionality: fully functional, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 460 mm, workpiece weight (max.): 400 kg, spindle speed (max.): 15,000 rpm, TECHNICAL DETAILS Travel Paths Travel X: 550 mm Travel Y: 410 mm Travel Z: 460 mm Max. Spindle Speed: 15,000 rpm Workpiece Table Size Length: 860 mm Table Size Width: 400 mm Max. Workpiece Weight: 400 kg MACHINE DETAILS Control Model: Matsuura G-Tech 30i Gedpfjxmgz Ejx Ag Nskc Motor Power: 22 kW Dimensions & Weight Dimensions (L x W x H): 2,200 mm x 2,700 mm x 2,500 mm (L x W x H) Weight: 10,000 kg Interface: BT40 EQUIPMENT Probe 3 Clamps CE Marking

Condition: used, Year of construction: 1978, Droop and Rein LFAS130KE Milling Machine Axes: X (Table travel) 3,000 mm, Y (Cross-Rail vertical travel) 1,000 mm, Z (Milling Head Saddle on Cross-Rail travel) 1,500 mm, U (Boring Bar vertical travel) 300 mm. Axes Feeds: X min 20 mm/min, max 2,000 mm/min; Y min 20 mm/min, max 2,000 mm/min; Z min 20 mm/min, max 2,000 mm/min; U manually. Note: The X, Y, Z axes are equipped with linear encoders. On the control panel there is a display unit (DRO) for the X, Y, Z axes. For the U axis, direct viewing on a graduated ruler is used. Moving Table Load: max. 20,000 kg/m (uniform distribution on table surface). Moving Table usable surface: 4,000 × 1,600 mm. Moving Table total surface: 4,900 × 1,600 mm. Distance between Table and Cross-Rail: max. 1,200 mm. Gkodpfxoxnc N Ij Ag Nec Machine Weight: approximately 50,000 kg. Overall Dimension of the Machine: L × W × H = 10,000 × 5,000 × 5,300 mm. Machine was made by DROOP & REIN, Germany, in 1978. Accessories include a 4-position at 90-degree Milling Head. Retrofitted in 2000 Coolant System: Yes. Not functional.