Used Milling And Drilling Machine for sale (87,277)

Condition: excellent (used), Year of construction: 2003, Model: G50 x 1600 Gbsdpfx Abjxphw Todeg Year: 2003 Radius of Arm: 1600mm Spindle Taper: MT5 Spindle Speeds: 25 – 2000 RPM Max. drilling capacity: 75mm iron / 50mm steel

Condition: like new (used), Year of construction: 1987, Used Giddings and Lewis Model MC 50 Twin Pallet Horizontal Machining Centre with Live Spindle, 60 ATC and G&L 8000A Control System. Serial # 445-1052.Year of Manufacture: 1987 Machine Formerly Installed at Rolls Royce Plc In Derby UK. Immediately for Sale and now Located in Belgium where it can be Inspected. Spindle Diameter - 130 MM Spindle Taper - 50 ISO Spindle Travel (Z Axis) - 915 MM Spindle Speeds (4 Ranges) - 5 to 1500 RPM Main Motor - 30 HP Pallet Size - 1219 x 1245 MM Pallet Rotation Increments - 0.001 DEG (360,000 POSITIONS) Pallet Changer Max Load - 5000KGS Pallet Max Load Without APC - 9000 KGS Longitudinal Travel (W) - 1700 MM Vertical Travel Of Head (Y) - 1500 MM Cross Travel (X) - 1800 MM Feed Rates Per Minute - 1.00MM/MIN TO RAPID RATE Rapid Traverse Rate Per Minute (X And Y) - 4500 MM / MIN Rapid Traverse Rate Per Minute (Z And W) - 3000 MM / MIN Auto Tool Changer - 60 POSITIONS Electrical Supply - 415V, 3PH, 50HZ Gbjdpfx Asu Dahnobdeg FEATURES AND EQUIPMENT High Pressure (25 Bar) Through Spindle Coolant, High Tolerance Machine. Accurate Machine which was well Maintained and Regularly Calibrated by Manufacturer. Renishaw Probing. Length - 11679 MM Width - 6502 MM Height - 4423 MM Weight - 40329 KGS

Condition: excellent (used), Year of construction: 1982, Used Noble & Lund Double Column Plano Milling machine model P/RLMA with vertical milling head and planing head. Serial #6344P Year of manufacture: October 1982. Gedeh U Nvkspfx Abdsbg MACHINE FORMERLY INSTALLED AT ROLLS ROYCE PLC IN DERBY UK. IMMEDIATELY FOR SALE AND NOW LOCATED IN BELGUIM WHERE IT CAN BE INSPECTED. SPECIFICATION TABLE WORKING AREA 5’-0 x 16’ 0”( 1524mm x 4876mm) MAX COMPONENT HEIGHT 5’0 (1524 mm) DISTANCE BETWEEN COLUMNS 6’1” (1866mm) MAX. WEIGHT OF WORKPIECE 15000kgs RAM TRAVEL 4’0”(914mm) RAM SECTION 14” x 14”(355 x 355 mm) SPINDLE TAPER ISO 50 MILLING SPINDLE MOTOR 40HP (30Kw) MILLING FEED RATES / MIN 1”-48”/MIN( 25-1200MM/MIN) PLANING MOTOR 40HP(30 Kw) MILLING SPINDLE SPEEDS 7-835 RPM ELECTRICAL SUPPLY 415V 3Ph 50Hz LENGTH TBA MM WIDTH TBA MM HEIGHT TBA MM WEIGHT 42000 KGS NOTE: The information contained herein is provided in good faith, but however due to unforeseen errors or omissions cannot be binding as to accuracy.

Condition: good (used), Year of construction: 2001, functionality: fully functional, feed length X-axis: 500 mm, feed length Y-axis: 250 mm, feed length Z-axis: 160 mm, travel distance X-axis: 500 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 480 mm, spindle speed (max.): 9,000 rpm, feed rate X-axis: 2 m/min, feed rate Y-axis: 2 m/min, feed rate Z-axis: 1 m/min, spindle speed (min.): 100 rpm, quill diameter: 160 mm, table width: 320 mm, table length: 880 mm, We are offering a Fehlmann Picomax 54, year 2001, in very good condition. The machine has seen limited use, as our production mainly relied on larger automatic CNC machines. Details: Manufacturer: Fehlmann Model: Picomax 54 Year of manufacture: 2001 Condition: Fully operational, can be tested on-site Location: Boxtel, The Netherlands Gedpfx Absxwk D Eedjbg Availability: Immediately This is a reliable and precise machine, ideal for toolrooms, prototypes, or small production runs. The production company is closing in the Netherlands, so the machine is available for immediate sale.

Condition: new, functionality: fully functional, travel distance X-axis: 565 mm, travel distance Y-axis: 210 mm, spindle speed (max.): 3,000 rpm, spindle speed (min.): 50 rpm, total height: 1,120 mm, total length: 710 mm, total width: 890 mm, type of input current: DC, overall weight: 240 kg, table length: 840 mm, table width: 210 mm, power: 1.5 kW (2.04 HP), distance table to spindle center: 360 mm, WMD30LV - 230V / 1Ph Drilling capacity in steel ----- 32 mm Milling capacity in steel ----- 20 mm Face milling ----- 76 mm Motor ----- brushless 1.5 kW Spindle speed stepless 50 - 3000 rpm Spindle stroke ----- 70 mm Spindle taper ----- ISO 30 Worktable ----- 840 x 210 mm Cross travel ----- 220 mm Longitudinal travel ----- 565 mm T-slots ----- 3 x 14 mm Throat ----- 240 mm Spindle-to-table distance ----- 470 mm Weight ----- 230 KG STANDARD ACCESSORIES * Drill chuck incl. drill arbor * Digital depth stop * Digital spindle readout * Fine adjustment * Left / right rotation * Milling head can swivel 90° left/right * Toolbox OPTIONS * 3-axis digital readout * Base cabinet * Automatic longitudinal feed * Milling vise * ISO30 collet chuck & 12 collets in case * Milling cutter set Gbedpfega T Agex Abdjg

Condition: good (used), Year of construction: 2004, Ref. -No.: 10604 Manufacturer: UNION Type: TC 110 Year of construction: 2004 Type of control: CNC Control: SINUMERIK 840 D Powerline Storage location: Halberstadt Country of origin: Germany X-Travel: 2000 mm Y-Travel: 1250 mm Z-Travel: 1000 mm W-Axis: 550 mm Table Height: 1050 mm Spindle Diameter: 110 mm Number of T-slots: 10 Max. Workpiece Weight: 6000 kg Clamping Area: 1250 mm T - groove width: 22 mm T - slot spacing: 125 mm Tool Taper: ISO 50 Max. Torque: 1639 Nm Feed Speeds X/Y/Z Axis: 6000 mm / min Rapid Traverse X-Axis: 15000 m / min Gbodpfx Abox Sw Nmedog Rapid Travel Y-Axis: 15000 m / min Rapid Traverse Z-Axis: 15000 m / min Feed Capacities X/Y/Z: 16000 x 16000 x 20000 N swivel angle: 360 °

Condition: ready for operation (used), Year of construction: 2000, Controls: HEIDENHAIN TNC 426, connected load: 7.7kW, including Rotator 3R WorkPal, with documentation, without spare parts. Gsdpjx Tpytjfx Abdsbg

Condition: excellent (used), Year of construction: 2003, Deep Hole Drilling and Milling Machine TBFZ 1600 CNC Year of manufacture: 2003 X-AXIS TRAVEL: 1600 MM Y-AXIS TRAVEL: 1200 MM Z-AXIS TRAVEL: 500 MM W-AXIS TRAVEL: 1200 MM B-AXIS TRAVEL: 360° (Rotary table) * Table size (LxW): 1500x1500 mm Gjdsxz Aygspfx Abdsbg * T-slots: 5x DIN 650-22 h12, 150 mm spacing * Tool clamping: hydraulic * Electrical connection: 400 V, 50 Hz * Compressed air connection: rated flow rate 7000 l/min, operating pressure: 6 bar * Botek driller optionally available * Feed drive: brushless AC servo motors * Feed rate: 0-20000 mm/min * Rapid traverse: X 20000 mm/min, Y+Z 20000 mm/min * Manual mode: 20000 mm/min * Setup operation: 0-2000 mm/min

Condition: new, Drilling and milling machine OPTIMUM OPTImill MB 4 - Exhibition machine - This offer is an equipment package. Gbedpsu R Tftjfx Abdeg The following items and options are already included in the price: - OPTImill MB 4 Optimum precision drilling and milling machine - Machine base MSM 3 Optimum - Collet chuck set MK 4/ ER 32 - M16 Optimum - End mill set HSS IMUM - Precision machine vice FMS 100 Optimum - new exhibition machine -

Condition: excellent (used), Year of construction: 1999, travel distance X-axis: 500 mm, travel distance Y-axis: 350 mm, travel distance Z-axis: 610 mm, spindle speed (max.): 10,000 rpm, total height: 2,700 mm, total width: 1,700 mm, total length: 2,000 mm, power: 0.01 kW (0.01 HP), CNC-Drilling and Milling machine, Control Heidenhain TNC 426, only 8500 h Gjdpfjtvmtkjx Abdjbg table size 380x920 mm, travel X/Y/Z/W - 500/350/610 mm, max. table load 250 kg, spindle speed stepless 50-10'000 rpm., spindle performance 10,2 kw, drilling capacity Ø 25 mm, tapping capacity M20, taper SK 30, tool changer 24 places, elektronic handwheel, central lubrication, oil mist filter, coolant refigitor, preparation for spindle coolant + Renishaw, lot of tools and holders, manual

Condition: used, Year of construction: 2005, machine/vehicle number: 6538, Horkos MOH 5-Axis Oil Hole Drilling Machine X/Y/Z 500/150/765mm, B-Axis rotary table with A-Axis unit for part size 630 x dia 190mm, spindle 8.000rpm / HSK-63-A, 12-Pos-ATC, LxW xH, CNC GE-FANUC 160i-MB, LxWxH,ca. 2x4x3m Gsdpfxoxxz Sps Abdobg

Year of construction: 1968, condition: good (used), For sale is a milling machine Deckel brand from 1968 Gjdpfeihf Etjx Abdjbg The machine is in a good to very good condition and fully functional (No digital display but can be mounted additionally on request) Technical data: Tool holder: SK 40 Travel X/Y/Z: 400 / 200 / 400 mm speed range: 40 - 2000 rpm spindle travel vertical: 60 mm spindle travel horizontal: 100 mm feeds: 8 - 400 mm/rev table size: 700 x 330 mm motor power: 2,2 kW connection: 400 V / 16 A plug weight: approx. 1300 kg All prices plus VAT Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high-quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us, please visit our website

Year of construction: 1972, condition: ready for operation (used), Spindle-to-table distance min./max.: 81mm/481mm, counter support spindle center distance: 195mm, spindle head swivel: 360°, milling spindle diameter: 70mm, spindle adjustment: 100mm, headstock adjustment: 300mm, table dimensions X/Y: 480mm/820mm, travel X/Y/Z: 500mm/200mm/400mm, max. workpiece length: 400mm, spindle speed: 1600rpm, feed X/Y: 500mm/min, feed Z: 250mm/min, spindle head swivel: +/-30°, machine dimensions X/Y/Z: approx. 1600mm/2550mm/1700mm, weight: approx. 2300kg. The machine was electrically tested at the end of 2025 and a defect of the emergency stop switch was discovered. Documentation available. On-site inspection is possible. Gbodpfsx S Rcmex Abdjg

Condition: good (used), 1 x geared drilling and milling machine Arboga UFB 3008 Nice machine from a small toolmaking shop. Speeds: 100 - 3200 rpm in 8 steps / 2 via motor Spindle mount: MT 3 Table: 240 x 580 mm Accessories: 1 x drill chuck 1 - 16 mm Gbsdjx Rpxdspfx Abdjg 1 x tapping chuck 4 x MT 3 drills 1 x machine vice 1 x dividing head with 3-jaw chuck The machine can be inspected under power

Condition: excellent (used), Year of construction: 2009, Bernardo FM 45 V drilling and milling machine. The FM 45 V drilling and milling machine offers an optimal price-performance ratio thanks to the standard spindle feed. The dovetail guide of the gear head ensures maximum precision and stability. Drilling capacity in steel 32 mm Drilling capacity in cast iron 40 mm Throat Godpfx Abevutw Hedsbg 260 mm Spindle speed (12) 50 - 2520 rpm Spindle mount MK 4 Quill stroke 120 mm Quill feed (3) 0.12 / 0.19 / 0.26 mm/rev Table size 820 x 240 mm Distance spindle / table 40 - 485 mm Travel path (x / y) 550 / 190 mm Height adjustment of milling head 400 mm T-slot size 14 mm T-slot distance 55 mm Motor output power S1 100% 0.85 / 1.1 kW (400 V) Motor input power S6 40% 1.1 / 1.5 kW (400 V) Machine dimensions (W x D x H) 1150 x 850 x 1450 mm Weight approx. 285 kg Standard with automatic spindle feed and thread cutting device Large speed range 50 - 2520 rpm (12 levels) Dovetail guide for x, y and z axes, adjustable via wedge strips Versatile application options, slot milling, face milling, boring,.... Solid large cross table, precisely surface-machined Milling: spindle feed via handwheel Drilling: spindle feed via handwheel High-quality aluminum motor, designed for continuous operation Stable and vibration-free cast design Simple and quick speed change using a gear lever Pivoting milling head for angle drilling, milling bevels, etc. Location: from stock 54634 Bitburg - available at short notice -

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, travel distance X-axis: 540 mm, travel distance Y-axis: 240 mm, spindle speed (max.): 1,650 rpm, spindle speed (min.): 45 rpm, spindle mount: MK 4, throat depth: 350 mm, quill stroke: 130 mm, total length: 1,250 mm, total height: 1,900 mm, table width: 225 mm, total width: 1,100 mm, table length: 800 mm, drilling capacity: 40 mm, spindle nose: MK-4, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, drilling capacity Ø 40 mm, motor 1,9 /2,2 KW, table size 800x225 mm, spindle speed 45-1650 rpm stepless, MT-4, el. table arising device, automatic spindle feed, coolant device, dimensions 1250x1100x1900 mm, weight ca. 600 kg Gedpfxowt Swzj Abdebg

Condition: excellent (used), Year of construction: 1988, x = 560 · y = 500 · z = 450 · 5000 rpm · fixed angle table · splash guard cabin ----- The machine has been overhauled and can therefore be considered as nearly new. All wear parts have been replaced. The angle table has been refinished and the machine has been partially repainted. The guideways have been newly hand-scraped. Gsdpfox Rdidjx Abdebg

Condition: used, Universal Tool Milling Machine DECKEL Type FP 1 Machine No. 51265 Year of manufacture: approx. 1967 Travel paths X: 300 mm Y: 150 mm Z: 340 mm Table size 600 x 200 mm Spindle taper SK 40 - S20 x 2 Spindle speed 40–2000 rpm, 16 steps Motor power 1.0 and 1.6 kW, pole-changing Power supply 380 Volt, 50 Hz - Feed on X and Z axes - Spindle speed via 2 motor speeds and 8 gear steps Gbsdpfxjghtvae Abdeg - Quill movement at vertical milling head 60 mm - Swiveling, rotating, and tilting angle table - Coolant pump in machine base - Separate control cabinet Space requirements L x W x H 1100 x 1100 x 1600 mm Weight 690 kg In good condition

Condition: new, Solid Hans Schreiner drilling machine Z5045C/1 for the commercial demand. Gbodpfxovrv I Aj Abdog with automatic quill feeder, work light, coolant system and drill chuck Technical data: Spindle cone MT 4 Motor output power S1 1,1 kW, 400 V Table dimensions 730 x 210 mm max. wokrpiece height 700 mm Speed 12 80 till 2500 U/min Worktable travel 500 x 205 mm Weight 470 kg

Condition: like new (used), Year of construction: 2013, functionality: fully functional, Ficep 1201 DE Excalibur drilling machine for processing flat steel and profiles with longitudinally moving drilling unit. This machine has been completely cleaned and checked. The drilling machine has a numerically controlled, longitudinally moving drilling unit, X-axis, adjustment 0 - 15,000 mm, automatic tool change system with HSK A80 holder for 6 tool positions. Thanks to the 19 kW drill spindle drive, the drilling machine is suitable for use with carbide drilling tools. Technical details: Profiled and flat steel support with guide rail with fixed table Total length 15 m. Mobile drilling unit for longitudinal positioning on workpieces. Horizontal drill head with one drill spindle Additional drill chuck storage in X-axis direction Clamping device for securing material Position detection device Profile size - max.: 1200 x 1200 mm Number of drill spindles: 1 pc. Drill diameter: 5 - 40 mm Thread cutting: M6 - M30 Drill spindle speed: 180 - 3000 rpm Holder: HSK A 80 Tool changer: 1 x 6 Gedpfsv Iamzjx Abdjbg For further information, please contact us

Condition: new, Year of construction: 2025, Heavy, solid cast iron design High running smoothness due to ground gear wheels running in an oil bath Right/left hand rotation Automatic quill feed with manual fine feed Motorized positioning of the Z-axis Motorized table feed of the X-axis Coolant device Machine lamp Gear head can be swivelled ± 60 Adjustable wedge bars Solid dovetail guide of the column, hand-scraped, for highest stability and greatest possible precision Height-adjustable, large-dimensioned protective disk with microswitch Drilling depth stop Digital position indicator DRO 5 Drilling / tapping function Massive and large dimensioned cross table, precisely surface machined with T-slots and adjustable taper bars Solid cast iron machine base with chip channel Single-stage quality industrial electric motor Wide speed range from 60 - 2,760 min-1 due to 2 infinitely variable speeds Dimensions and weights Length approx. 1600 mm Width/depth approx. 930 mm Height approx. 2110 mm weight approx. 495 kg Drilling/milling capacity Godpfx Abjg U Uv Uedsbg cutter head size max. 63 mm shank cutter size max. 26 mm Drilling capacity steel (S235JR) 24 mm Continuous drilling capacity steel (S235JR) 20 mm Electrical data Supply voltage 230 V Mains frequency 50 Hz Electrical connection Total connected load 1.5 kW Horizontal milling table length 800 mm width 240 mm Distance vertical spindle - milling table max. 420 mm T-slots size 14 mm T-slots number 3 T-slots distance 80 mm Standards and approvals Standard DIN EN 55011 EMC class C2 Travel X-A

Condition: excellent (used), Year of construction: 2011, functionality: fully functional, spindle speed (max.): 2,340 rpm, spindle speed (min.): 32 rpm, spindle mount: MK 4, throat depth: 293 mm, quill diameter: 72 mm, quill stroke: 145 mm, total length: 1,340 mm, total height: 2,050 mm, table width: 225 mm, total width: 1,280 mm, table length: 800 mm, drilling capacity: 50 mm, nominal power: 2.2 kW (2.99 HP), Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 50 mm, motor 2,2 / 3,0 KW, table size 800x225 mm, spindle speed 32-2340 rpm stepless, MT-4, el. tapping device, machine light, coolant device, dimensions 1340x1280x2050 mm, weight ca. 780 kg Godpfjwn E Sbjx Abdsbg

Condition: new, Drilling,- and milling machine with a 90° pivoting gear head for the commercial demand. Incl. halogenlamp, 3-axis-digital display and coolant system Without underframe Technical data: Spindlecone MT 4 Motor output power S1 1,1 kW, 400 V Weight 325 kg Table dimensions 800 x 240 mm max. workpiece height 420 mm Speeds 12, 80 till 2500 rpm Gsdpfsvrv Naox Abdobg 80/150/260/380/710/1250/ 160/300/520/760/1420/2500 U/min lling capacity in steel 45 mm Worktable travel x=585mm, Y= 205 mm Milling table tilt 38° Optional equipment: Drill chuck, quick release chuck, milling cutter and tools

Condition: excellent (used), Year of construction: 2010, functionality: fully functional, quill stroke: 120 mm, quill diameter: 75 mm, total length: 1,000 mm, total width: 850 mm, total height: 1,900 mm, spindle speed (max.): 2,500 rpm, spindle speed (min.): 50 rpm, spindle mount: MK 3, drilling capacity: 32 mm, nominal power: 0.75 kW (1.02 HP), table length: 730 mm, table width: 210 mm, throat depth: 270 mm, Milling-/Drilling Machine, DRO on 3 axis, drilling capacity Ø 32 mm, motor 0,75, cross table size 730x210 mm, spindle speed 50-2500 rpm, MT-3, tapping device, machine lamp, coolant device, tapping device, dimensions 100x850x1900 mm, weight ca. 400 kg Gjdpfxex Ebi Ie Abdobg

Condition: used, Drilling and milling machine Hans Schreiner ZAY7040G, year 2009, in very good condition, 1.5 kW, 800 mm table length, 240 mm table width, 300 kg Prices subject to change; errors and misprints excepted. Gjdpfx Aex H Ui Hobdsbg