Used Cantilever Arm for sale (11,126)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time Isdpjmhhyaofx Addjht - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Cantilever rack OHRA 3 m high Over 100 m in stock, see pictures. Height 3 m high Boom 100 cm Load capacity/boom 800 kg 4,5 running meters, 4 pcs. uprights with outrigger Negotiation price: € 2.160,-- /net Offer consists of: 4 pcs. uprights with foot 3 m high 4 adjustable outriggers, each upright 100 cm, load capacity 800 kg/outrigger. Diagonal braces, stiffeners and distances are included. Frame spacing 150 cm Load capacity per upright per side 3.200 kg Height of 2.5 m, 4 m or 6 m available Other composition on request: Constantly over 3000 running meters of pallet racks from numerous manufacturers in stock. Transport and assembly available on request. (Changes and errors in the technical data, specifications and prices and prices and subject to prior sale! See our terms and conditions, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for, or offer numerous items from various fields broom-clean business evacuations Business resolutions Fast - flexible - ready to hit! We clear and - or dispose also for liquidators. Write us with some keywords, we will contact you immediately. Ihedpfx Adocd Dwysdet To get to our site please click on our logo!

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 3,000 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 3,000 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm usable depth Iedpfxsmhhx Io Addeht Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: new, OHRA cantilever rack Negotiated price: € 5.940,00 net ex stock You are bidding on a rack with a length of 7.5 m, consisting of 6 uprights with base, 6 m high + 4 adjustable outriggers per upright (120 cm), load capacity 900 kg/outrigger. Iedpfx Ajby Uunoddjht Diagonal bracing, stiffeners and spacers are included. Bridges, grids and chipboards are available separately at an extra charge! Frame spacing 150 cm Arm length / outrigger 120 cm Load capacity 900 kg / outrigger Load capacity per upright per side 3,600 kg Over 100 meters available. Heights of 2.5 m, 3 m or 4 m available. Other combinations on request. (Subject to changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our GTC, all prices excl. VAT ex stock) Purchase / Sale We are constantly looking for or offering numerous items from various areas Machines from all industries Remaining stock Special items swept clean company clearances Business liquidations Purchase of remaining stock Fast - flexible - ready for action! We also clear and or dispose of for liquidators. Write to us with a few keywords and we will get back to you as soon as possible.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 2,600 mm with base section 1,000 mm 12 cantilevers with 1,000 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) Ihodpfxjd Tbbdo Addjt - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 2,600 mm - Load capacity per stand 1,800 kg - Base section and cantilevers with 1,000 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth Ihedpomidyfofx Addst - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Isdpsmhhl Hefx Addoht Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. Ihsdpfxemkixwe Addot According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) Ihsdpsh Ek Daefx Addst - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Year of construction: 2000, Offer 25523 Technical Data: - Single-sided cantilever rack consisting of 9 uprights with plug-in system Ihedox U S Ivjpfx Addjt - Height-adjustable storage arms - Approx. 37 storage arms - Upright height approx. 2500 mm - Width of upright + support arms approx. 1450 mm - Max. arm load approx. 500 kg - Max. support load per upright approx. 3000 kg - Axial distance between rack parts connected with diagonals approx. 0.9 m - Grid pitch for arm height adjustment 125 mm - Arm dimensions: L 1200 x W 90 x H 65 - 120 mm - Upright dimensions: W 220 x H 150 mm - Weight per upright approx. 250 kg - Weight per arm approx. 20 kg

Condition: used, Year of construction: 2002, Load per column / Load per cantilever / Cantilever lenght / Iodpfxox E Duij Addsht Rack height / OHRA cantilever racking 5500x600mm 3000kg / per side Dimensions Length: approx. 5500mm Arm length: 500mm Arm load: 500 kg /max Per side: 3000 kg /max Year of manufacture: 2002

Condition: excellent (used), Cantilever transport trolley Workshop trolley Height 1650 mm Ijdpfx Adspkx Scjdeht width 780 mm Depth 600 mm length of support arms 300 mm sturdy design

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands 1.833.- € (net)! Price for transport within Germany (excluding islands): € 500 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! Ihedpfxjddmpve Addet A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 3,000 mm high, hot-dip galvanized, IPE 160 Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600mm 500 kg per arm / 2250 kg per stand with 4 uprights per arm level 4 x 500 kg = 2,000 kg, arms IPE 80, with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, carrying capacity per cantilever arm: 810 kg, load capacity: 3,900 kg, shelf height: 2,500 mm, total length: 38,750 mm, axle spacing: 1,250 mm, clearance between the columns: 1,250 mm, load capacity per stand: 3,900 kg, throat depth: 800 mm, We hereby offer you, subject to change, 39 linear metres of used heavy-duty cantilever racking, with a load capacity of 3900 kg per stand. Manufacturer SSI Schäfer GmbH Type KR Year of manufacture 2008 Stand load per stand side 3900 kg Support profile stand IPE 180 Stand height 2500 mm Cantilever arm length 800 mm Cantilever arm load 810 kg Cantilever arm profile with deflector INP 80 Composition: 34 stands 68 cantilevers 6 cross braces, axis dimension 1250 mm 72 longitudinal braces, axis dimension 1250 mm Ihjdpfxovt Um Hs Addot Cantilever arm shelving system 1: 16 stands, 15 bays, 34 cantilevers, 30 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 17.5 linear meters Cantilever arm shelving system 2: 18 stands, 17 bays, 38 cantilevers, 34 longitudinal braces, 3 cross braces, axis dimension 1250 mm = 21.25 linear meters Condition: The cantilever rack is in very good condition as you can see in the photos and is loaded onto pallets dismantled. The above technical data was taken from the manufacturer's brochures or other sources for which we cannot guarantee their accuracy and completeness. The sale is without guarantee or warranty. We would be pleased if this cantilever rack is of interest to you and look forward to your inquiry. Your Mertens & Frowein GmbH service team

Condition: new, Cantilever rack, one-sided, frame height 2.60m high, 80cm deep arms, 750kg per arm, hot-dip galvanized - New - : Price ex site incl. loading! Price: 1.480.-€ (net) Price transport / packaging costs within Germany (without islands): 400.-€ (net)! Of course, you can also build longer or shorter shelving units by omitting or purchasing additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: German brand manufacturer, new goods Description: - Shelving upright, one-sided 2,600 mm high, hot-dip galvanized Iodpfxjnwmwvs Addjht - Base and arm depth 800 mm - with 3 height-adjustable shelf arms each - Load capacity with load center 400 mm - 750 kg per arm / 2..250 kg per upright with 4 uprights per arm level 4 x 750 kg = 3,000 kg Profiles: Frame (uprights): IPE 140, arms IPE 80 incl. longitudinal and diagonal bracing, The standard center distance between the frames is 1.30 m. Other standard center distances available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all screws and nuts (dispatch within Germany by parcel directly from Würth), without ground anchors. When using additional arms per frame, please note that the specified maximum load capacity of the frames must not be exceeded, or the maximum usable load capacity per arm will be reduced! Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us! Available optional extras (at extra cost), photos enclosed: Footrest with load deflector Footrest with load deflector, large Foot section with tire guard Cantilever arm with load deflector Cantilever arm with plug-in roll-off protection Clampable roll-off protection Gratings Conversion for use for the storage of pallets Photos are examples of single-sided shelving and the material used!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 6.30m height, 1.20m arms, 500kg per arm - new -: Ihodpefivg Rsfx Addst Price ex location including loading! 1 shelf unit with 4 stands € 4.115 (net)! Transport costs within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Shelf uprights on one side approx. 6,300 mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with a load center of 600 mm 500 kg per arm / 4,000 kg per stand with 4 stands per arm level 4 x 500kg = 2,000 kg Profiles: frame: IPE220, arms: IPE 80 with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: new, Year of construction: 2020, Cantilever rack, one-sided, 6.30m high, 1.20m arms, 900kg per arm - new - : Price ex location incl. loading! 1 shelving unit with 4 uprights 3.732.-€ (net)! Transportation costs within Germany (without islands): 490.-€ (net)! One cantilever shelving system, hot-dip galvanized, consisting of: Shelving upright, one-sided approx. 6,300 mm high, hot-dip galvanized Base and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity with load center 600 mm 900 kg per arm / 4,000 kg per upright with 4 uprights per arm level 4 x 900 kg = 3,600 kg Isdpofivg Ssfx Addsht Profiles: Frame: IPE220, arms: IPE 100 with longitudinal and diagonal bracing e = 1300mm, standard is 1.30m. Other standard lengths available from stock: 1m / 1.25m / 1.50m / 1.70m / 1.90m! From a length of 1.50m there is a small surcharge on top of the stated price! Special dimensions (other center distances) are also available on request, but also cost extra and have a longer delivery time as they have to be made separately! If you do not specify a different center distance, we will deliver the shelf with a center distance of 1.30m. In this case, the length of a row of shelves with 4 uprights (3 bays) is approx. 4m. Supplied with all nuts and bolts (dispatch within Germany by parcel direct from Würth), without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) available! Please contact us!

Year of construction: 2021, condition: new, Cantilever rack, one-sided, 3.70m height, 1.20m arms, 500kg per arm - new -: Price ex location including loading! 1 shelf unit with 4 stands € 2.255 (net)! Price for transport within Germany (excluding islands): € 490 (net)! Of course, you can also build longer or shorter shelving units from them by omitting or buying additional frames (or by using different center distances), this example with 4 frames is only the most common shelving solution! A cantilever racking system, hot-dip galvanized, consisting of: Iedpof Tv T Nofx Addjht Arms: IPE 80 Frame: IPE 180 Shelf stand on one side approx. 3,700mm high, hot-dip galvanized Leg and arm depth 1200 mm with 3 height-adjustable shelf arms each Load capacity at a load center of 600 mm 500 kg per arm / 2,700 kg per stand with 4 stands per arm level 4 x 500 kg = 2,000 kg with longitudinal and diagonal bracing e = 1300 mm, the standard is 1.30 m - so if you do not have any deviating information, we will deliver the rack with a center distance of 1.30 m. Other center distances possible e.g. 1m, 1.25m for a small surcharge also 1.50m or special dimensions! As a standard delivery, the length of a row of shelves with 4 uprights is approx. 4000 mm. Delivery with all screws and nuts, without ground anchors. Other configurations (frame height, arm lengths, arm types etc.) can be selected! Please contact us!

Condition: good (used), Load capacity: 50 kg Working length: 7000 mm Iedpfx Aoh Ri Svsddjht

Condition: excellent (used), total width: 4,000 mm, total height: 7,000 mm, clearance between the columns: 2,000 mm, shelf length: 900 mm, Equipment: double-sided, Composed of 3 double-sided uprights H 7000 mm 9 levels with 750 mm arms Shelf load capacity: 900 kg Ihsdpfjulufpjx Addet Level load capacity: 2700 kg Load per upright front: 8100 kg Upright spacing: 2000 mm

Condition: like new (used), Almost new cantilever racks, single- and double-sided, are available for sale from stock. Loading marks may be visible on the system. Available quantity: 20 pcs System dimensions: Iodjxcn Ekepfx Addoht Arms: base + 5 arms, 80 cm long Load capacity: 160 kg/column Columns: 4 pcs, 2500 mm high, 90 cm column spacing Load capacity: 1000 kg/column Total system length: 3300 mm Total system depth: 1100 mm

Condition: used, mileage: 870,390 km, power: 324 kW (440.52 HP), first registration: 10/2008, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 6x2, wheelbase: 6,450 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro5, suspension: steel-air, number of seats: 2, total length: 9,150 mm, total width: 2,550 mm, total height: 4,000 mm, Year of construction: 2008, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, traction control, trailer coupling, - Digital tachograph - Tachograph (control device) - Fixed - Short cab - Power take-off (PTO) - Pump - Central lubrication system Number of axles: 3, Configuration: 6x2, Payload: 15,780 kg, Unladen weight: 12,220 kg, Gross vehicle weight: 28,000 kg, Total tank capacity: 450 liters, Trailer coupling, Unbraked trailer load: 750 kg, Kingpin diameter: 40 DIN, Fifth wheel: Fixed, Number of locks: 1, Central lubrication system, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Tachograph (control device), Digital tachograph, Air conditioning, Auxiliary heating, Electric windows, Electric mirrors, Radio/cassette, Colour: Multicoloured, Heated mirrors, Lighting type: Halogen lamp, Air conditioning, Seat heating, Flashing lights, Engine power: 324 kW (434 hp), Fuel: Diesel, Euro: 5, Gearbox type: AS-Tronic, Transmission make: ZF, Gears: 12, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, Body year: 2003, System length: 595 cm, Hook lift/cable system manufacturer: Multilift, System type: XR21S61 RPCO-LA, Pump, Hook lift height: 130, Central locking, Seats: 2, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual Transmission Gearbox: ZF, 12 gears, automatic Axle configuration Brakes: Disc brakes Axle 1: Tyre size: 385/65R22.5; Steerable; Left tyre tread: 12 mm; Right tyre tread: 13 mm; Suspension: leaf spring Axle 2: Tyre size: 315/80R22.5; Twin tyres; Left inner tread: 18 mm; Left outer tread: 18 mm; Right inner tread: 18 mm; Right outer tread: 18 mm; Suspension: air suspension Ihjdpfxoxd Scvo Addjt Axle 3: Tyre size: 315/70R22.5; Twin tyres; Lift axle; Left inner tread: 19 mm; Left outer tread: 20 mm; Right inner tread: 19 mm; Right outer tread: 20 mm; Suspension: air suspension Weights Unladen weight: 12,220 kg Payload: 15,780 kg GVW: 28,000 kg Functionality Loading floor height: 129 cm Pump: Yes Condition General condition: average Technical condition: average Optical condition: average Damage: none Number of keys: 1 Identification Registration: BV-NB-58 Kleyn Trucks is one of the world’s largest independent traders in used vehicles. Here you can choose from a continuously changing stock of 1,200 used trucks, tractors, and trailers. Our range includes all European makes, model years, and price categories. Why buy at Kleyn Trucks? Simple! • Large, fast-changing stock • Recognizable quality • Good prices • Honest and correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) license plates are arranged quickly • Professional technical services • The security of “recognizable quality” • And more.... Please visit our website for special offers and the full stock: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send an enquiry via our website. Ask directly about our...

Condition: ready for operation (used), Year of construction: 2018, operating hours: 400 h, General Data Ihodpfx Aex Tkbfoddst Machine weight 34 kg This 6-axis Universal Robots UR10e cell was manufactured in 2018. It features a load capacity of 10 kg and a range of 1300 mm. Weighing 33.5 kg, this robot arm is designed for tasks requiring precision and flexibility. Consider the opportunity to buy this Universal Robots UR10e cell. Contact us for more information. Application Types Robotics

Condition: good (used), mileage: 688,855 km, power: 382 kW (519.37 HP), first registration: 10/2014, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x4, wheelbase: 3,750 mm, fuel: diesel, brakes: retarder, color: other, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 8,940 mm, total width: 2,550 mm, total height: 3,760 mm, Year of construction: 2014, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, navigation system, parking heater, power mirror, retarder, traction control, trailer coupling, - Digital tachograph - Tachograph (recording device) - Fixed - Hydraulic system - Power take-off (PTO) - Pump - Sleeper cab - Auxiliary brake system Number of axles: 4, Configuration: 8x4, Unladen weight: 15,000 kg, Gross weight: 33,000 kg, Total fuel tank capacity: 400 liters, Trailer coupling, Kingpin diameter: Special, Fifth wheel: Fixed, Number of differentials: 2, Suspension type: Full air suspension, Cab type: Sleeper cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Parking heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: Multi-color, Heated mirrors, Reversing camera, Lighting type: Halogen lamp, Air conditioning, Heated seats, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 382 kW (512 hp), Fuel: Diesel, Euro: 6, Transmission type: Opticruise, Gearbox make: Scania, Gears: 12, Auxiliary brake system, Retarder make: Scania, Power steering, ABS, ASR, Hydraulic system, Power take-off (PTO), PTO type: 1, Starter battery, System length: 595 cm, System type: ., Pump, Hooklift height: 138, Central locking, Seating arrangement: 1+1, Upholstery: Leather, Seat adjustment: Manual Transmission Transmission: SCA, 12 speeds, automatic Axle configuration Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire size: 385/65R22.5; Steered; Tread left: 12 mm; Tread right: 12 mm Axle 2: Tire size: 315/80R22.5; Twin tires; Tread left inner: 5 mm; Tread left outer: 5 mm; Tread right inner: 9 mm; Tread right outer: 4 mm Axle 3: Tire size: 315/80R22.5; Twin tires; Tread left inner: 4 mm; Tread left outer: 5 mm; Tread right inner: 7 mm; Tread right outer: 6 mm Axle 4: Tire size: 385/65R22.5; Lift axle; Steered; Tread left: 11 mm; Tread right: 10 mm Weights Unladen weight: 15,000 kg Payload: 18,000 kg Gross vehicle weight: 33,000 kg Functional Pump: Yes Maintenance APK (Main Technical Inspection): valid until 12.2026 Condition Technical condition: good Optical condition: good Damages: none Iedpfox Tpa Hsx Addjht Number of keys: 2 Identification Registration: KLEYN1 Kleyn Trucks is one of the world's largest independent dealers of used vehicles. Here you can choose from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European makes, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large and rapidly changing stock • Recognizable quality • Competitive pricing • Honest business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration plates arranged quickly • Expert technical services • The security of 'recognizable quality' • And much more… Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and send a request via our website. Ask directly about our European...

Condition: used, mileage: 228,144 km, power: 129 kW (175.39 HP), first registration: 06/2017, fuel type: diesel, tire size: 205/75R17,5, axle configuration: 4x2, wheelbase: 3,850 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 6, emission class: euro6, suspension: steel-air, total length: 6,240 mm, total width: 2,300 mm, total height: 2,600 mm, Year of construction: 2017, Equipment: ABS, air conditioning, cruise control, electric window regulation, traction control, = Additional Options and Features = - Digital tachograph - Tachograph (recording device) - Fixed fifth wheel - Short cab - Power take-off (PTO) - Pump = Remarks = Number of axles: 2, Configuration: 4x2, Unladen weight: 4,300 kg, Gross vehicle weight: 8,550 kg, Total tank capacity: 200 liters, Fifth wheel: Fixed, Cab type: Short cab, Cruise control, Tachograph (recording device), Digital tachograph, Air conditioning, Number of airbags: 1, Electric windows, Color: Multicolor, Metallic, Heated mirrors, Rearview camera, Lighting type: Halogen lamp, Lane departure warning, Blind spot sensor, Flashing lights, Engine output: 129 kW (173 Hp), Fuel type: Diesel, Emission standard: Euro 6, Transmission type: Automatic, Gears: 6, Power steering, ABS, ASR, Power take-off (PTO), PTO type: 1, Starter battery, System length: 400 cm, System type: ., Pump, Hook device height: 136 cm, Seating configuration: 1+2, Seat upholstery: Fabric, Seat adjustment: Manual, HYVA XR8S4150 CITY HOOKLIFT = Further Information = Axle Configuration Tire size: 205/75R17.5 Brakes: Disc brakes Axle 1: Steering; Tire tread left: 8 mm; Tire tread right: 11 mm; Suspension: leaf springs Axle 2: Twin-tires; Inner left tire tread: 12 mm; Outer left tire tread: 11 mm; Inner right tire tread: 7 mm; Outer right tire tread: 12 mm; Suspension: air suspension Weights Curb weight: 4,300 kg Payload: 4,250 kg Gross vehicle weight: 8,550 kg Functional Pump: Yes Condition Ihodpfx Adox S Uy Aodjt General condition: average Technical condition: average Optical condition: average Damages: none Number of keys: 1 Identification Registration: KLEYN1 = Company Information = Kleyn Trucks is one of the world’s largest independent dealers in pre-owned vehicles. Here you can select from a constantly changing stock of 1,200 used trucks, tractors, and trailers. Our range covers all European brands, model years, and price categories. Why buy from Kleyn Trucks? Simple! • Large, fast-changing inventory • Recognizable quality • Competitive pricing • Reliable business practices • Multilingual staff • We understand our customers • Support with import and transport • (Export) license plates arranged quickly • Professional technical services • The assurance of “recognizable quality” • And more… Visit our website for special offers and our complete stock list: Leasing through Kleyn Trucks is available in most European countries! Calculate your leasing rate online and submit a request through our website. Ask directly about our European warranty package.