Used Cantilever Rack Shelf for sale (4,336)

Condition: like new (used), Year of construction: 2025, Cantilever rack used: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 2,600 mm with foot section, 1,000 mm usable depth 12 cantilevers with 1,000 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm spacing Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Shelf height 2,600 mm - Load capacity per upright 1,800 kg Hjdpfemhhyasx Acrjl - Foot section and cantilever arms with 1,000 mm usable depth Cantilever arms in Height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 600 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf stands, height 4,160 mm with foot section 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 stands in stock) Hodpfx Ash Ek Dajcrjl Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per stand side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilever arms per stand and 2 base sections with a depth of 1,200 mm, standard = 4 storage levels one above the other per side of the stand - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 shelf uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm shelf length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Shelf height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. Hodpfx Acsd Tqalorel The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,500 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 40 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface Hedpfx Acjfdkb Ujrsl - Rack height 3,500 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Cantilever rack in painted version (RAL 7016 anthracite): Scope of delivery: 4 rack uprights, height 4,200 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth Longitudinal and diagonal struts for 1,300 mm rack axis spacing (4,000 mm rack length) Fastening material (screws, nuts and washers) - (*No paint damage!) - (*No damaged components!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 racks in stock) Hodpjmidyfjfx Acrol Net price: €1,990.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Surface painted in RAL 5010 (gentian blue) - Rack height 4,200 mm - Load capacity per stand 2,200 kg - Base and cantilever arms with 1,200 mm usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 730 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without floor anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery can take place in approx. 1 - 2 weeks after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-compatible and must be able to bear the loads. The customer must check and ensure that the soil condition and load-bearing capacity as well as any official permits that may be required are obtained. The shelf supports must be anchored to the ground on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm from the top edge of the stand.

Condition: like new (used), Year of construction: 2024, Cantilever rack double-sided used: Hot-dip galvanized screw system Scope of delivery: 4 double-sided shelf uprights, height 3,500 mm with foot parts each 1,200 mm 24 cantilevers with 1,200 mm depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Also available in larger quantities: 20 uprights in stock) Detailed description: - Stable steel construction made of IPE profiles - Surface of all components hot-dip galvanized - Load capacity per upright side 2,250 kg - Load capacity per cantilever arm 750 kg - Cantilever arms height adjustable in 100 mm increments - 6 screwable cantilevers per upright and 2 foot parts with a depth of 1,200 mm, standard = 4 storage levels one above the other per stand side - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length 4,000 mm - Including fastening material (without ground anchors) Hodpfxsmkixws Acrol - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack stands, height 3,000 mm with base section 1,200 mm 12 cantilevers with 1,200 mm usable depth, standard Including longitudinal and diagonal braces for 1,300 mm axle spacing Incl. fastening material (without ground anchors) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 50 stands in stock) Detailed description: - Stable steel construction made of IPE profiles (screw system) - Hot-dip galvanized surface - Rack height 3,000 mm - Load capacity per stand 2,250 kg - Base section and cantilevers with 1,200 mm usable depth - Cantilevers in 100 mm increments height adjustable - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - Collection on site possible Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. Hedpfxofdkbho Acrsl The material is sensibly packed to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2025, Used cantilever rack: screw system in hot-dip galvanized design Scope of delivery: 4 rack uprights, height 4,160 mm with foot section, 1,200 mm usable depth 12 cantilevers with 1,200 mm usable depth, standard Longitudinal and diagonal struts for 4,000 mm rack length (distance 1,300 mm) Fastening material (screws, nuts and washers) - (*Delivery time approx. 1 week) - (*No damaged parts!) - (*Reorder spare parts and extension possible at any time) - (*Offer available in larger quantities: approx. 90 uprights in stock) Detailed description: Hsdpfxjmhhf Ss Acrjl - Stable steel construction made of IPE profiles (screw system) - Surface hot-dip galvanized - Rack height 4,160 mm - Load capacity per upright 2,250 kg - Foot section and cantilever arms with 1,200 mm Usable depth - Cantilever arms height adjustable in 100 mm increments - 3 screwable cantilever arms per stand, standard (= 4 storage levels) - Load capacity per cantilever arm 750 kg - Including longitudinal and diagonal braces for 1,300 mm spacing - Shelf length = 4,000 mm - Including fastening material (without ground anchors) - With assembly instructions and C4 load plates in accordance with DIN standard - Expert advice by telephone - Made in Germany - Short delivery time - On-site collection possible Our cantilever racks are manufactured exclusively in Germany. We offer reliable freight with registration before delivery. The material is packed sensibly to enable easy unloading. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and suitable for dowels and must be able to absorb the loads. The customer must check and ensure that the floor conditions and load-bearing capacity, as well as any official permits that may be required, are obtained. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and is not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: like new (used), Year of construction: 2024, Screw system in hot-dip galvanized design: Pick-up price: Sturdy steel construction made of IPE profiles Shelf height 3500 mm Load capacity per upright 2100 kg Foot section 1200 mm usable depth Cantilever arms height-adjustable in 100 mm increments 3 screw-on cantilever arms per upright Usable depth 1200 mm, standard (= 4 levels) Load capacity per cantilever arm 700 kg Including longitudinal and diagonal bracing Including fastening material (without ground anchors) With assembly instructions and load plates C4 according to DIN standard Hjdjmhhl Hjpfx Acrjl

Condition: new, Year of construction: 2024, carrying capacity per cantilever arm: 500 kg, shelf height: 3,200 mm, total length: 2,100 mm, total height: 3,200 mm, axle spacing: 1,000 mm, load capacity per stand: 2,500 kg, Cantilever rack in hot-dip galvanized design: Scope of delivery: 3 rack stands, height 3.2 m with base section, 1.8 m usable depth (2 m total depth) 12 cantilevers with 1.8 m usable depth (for chipboard with approx. 2.1 m depth) Longitudinal and diagonal struts for 4 m rack length (distance 1.3 m) Hodoqt Dmyepfx Acrjl Fastening material (screws, nuts and washers) Net price: €2,490.00 plus VAT Detailed description: - Stable steel construction made of IPE profiles (screw system) - Rack height 3,200 mm - Load capacity per stand 2,500 kg - Base section and cantilevers with 1,800 mm usable depth - (for 2,100 mm chipboard depth) - Cantilevers height adjustable in 100 mm increments - 4 screwable screws per stand Cantilever arms, standard (= 5 storage levels) - Load capacity per cantilever arm 500 kg - Including longitudinal and diagonal braces for 1,000 mm spacing - Shelf length = 2,100 mm - Including fastening material (without ground anchors) - With assembly instructions and load plates C4 in accordance with DIN standard - Made in Germany - Short delivery time Our cantilever racks are produced exclusively in Germany. We offer reliable freight with registration before delivery. The material is sensibly packed to enable easy unloading. Delivery for stock items can take place in approx. 1 week after receipt of the order. When installed outdoors, the load-bearing capacity is reduced by the wind and snow load. The subsurface must be made of concrete, level and dowel-capable and must be able to bear the loads. The condition of the soil and load-bearing capacity as well as any official permits required must be checked and guaranteed by the customer. The shelf supports must be anchored to the floor on site; anchoring to the wall is not necessary and not recommended. According to the trade association, it is recommended that the shelf supports on the top storage level have a projection of at least 500 mm above the top edge of the supports.

Condition: good (used), Technical specifications for the side panel: Shelving system: SSI Schäfer Type: R 3000 Included in the scope of delivery: 01x mesh side panel, used Material color: light silver lacquered for frame depth: 600 mm for frame height: 2,490 mm Item: SWG 3625 Dimensions: 2,485 x 450 mm Mesh size: approx. 50 x 50 mm Note: Mounting brackets are not included in the scope of delivery. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch Hsdpfx Ajylt Udscrel General product information: This item is offered only for collection. Should transport or shipping of this item be required, additional costs will apply. Please contact us to inquire about delivery costs, which vary depending on delivery location or scope of order.

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Single-sided rack with 6 supports and 24 arms 6 sets available Price: €5,000 per set Hodpfx Ajyu S Afjcrol Length per arm: 1,500 mm Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: like new (used), Cantilevered construction for long goods. Profiles are made of solid IPE steel. Double-sided rack with 6 supports and 48 arms 3 sets available Price: €7,500 per set Length per arm: 1,500 mm Hodpfxjyiat Eo Acrel Load per arm (IPE 140): 1,500 kg Load per upright (IPE 270): 6,000 kg

Condition: used, Year of construction: 2011, functionality: fully functional, machine/vehicle number: Modell 5003, carrying capacity per cantilever arm: 1,500 kg, shelf height: 3,585 mm, total length: 6,200 mm, total width: 1,520 mm, total height: 3,985 mm, number of shelf rows: 8, Cantilever rack, roll-out, make Lützenkirchen Hedpfx Ajyzn S Rocrol

Condition: good (used), Cantilever rack OHRA 3 m high Over 100 meters in stock, see pictures. Height: 3 m Arms: 100 cm Load capacity per arm: 800 kg 4.5 running meters, 4 uprights with arms. Negotiation price: €2,360 net Offer includes: - 4 uprights with base, each 3 m high - 4 adjustable arms per upright, each arm 100 cm, load capacity 800 kg/arm - Diagonal braces, stabilizers, and spacers included - Frame distance: 150 cm - Load capacity per upright/per side: 3,200 kg Heights of 2.5 m, 4 m, or 6 m also available Other configurations available on request. Constant stock of over 3000 lfm pallet racking from various manufacturers. Transport and assembly available on request. (Technical data, specifications, and prices subject to change without notice. Intermediate sale reserved! See our general terms and conditions. All prices excl. VAT, ex stock.) Buying / Selling: We are constantly purchasing and offering numerous items from various sectors: - broom-clean business clearances - company liquidations Hedpfx Aecd Dwyocrjl - fast – flexible – effective! We also clear or dispose for insolvency administrators. Contact us with a brief description and we will get back to you promptly. To visit our page, please click on our logo!

Condition: excellent (used), Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch Technical data of the pallet rack traverse: Racking system: META (Thyssen) Hjdpfx Aceiimtqerjl Included in delivery are: 01x pallet rack traverse, used Material color: orange type of truss: HN 100|20 box profile: 100 x 50 mm agraffe: 3 HK (hooks) clear width: 2.700 mm max. load per truss pair 2.100 kg, with evenly distributed load 02x safety pins, used execution: compl. galvanized To secure the longitudinal beams against unintentional lifting out General information about the article: This article is offered for pickup only. Any additional transport or shipment of this or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us. Our services at a glance: (prices on request) Assembly, erection our general assembly conditions are to be observed Rack inspection Rack inspection according to DIN EN 15635 executed according to the requirements of BGR 234 visual inspection for all racking systems Delivery with our own fleet (without unloading)

Condition: as good as new (ex-display), total width: 1,060 mm, total height: 1,540 mm, Remark: - This is a II. Wahl product, new and unused. II. Choice means there may be dust deposits, minimal scratches or soiling may be present Technical data for the shelving unit: Shelving system: SSI Schäfer Type: R 3000 Technical data for installation: Number of shelf rows: 01 pcs. Shelf length: approx. 1,056 mm Number of bays per shelf row: 01 pcs. á 994 mm Number of shelves: 06 pcs. The scope of delivery includes: 02x shelf uprights, second choice (new) Material color: sendzimir galvanized Frame profile dimensions: 31 x 60 mm incl. bulkhead stays and base plates The uprights are unassembled 1,540 mm high 300 mm deep Remark: We are happy to pre-assemble the shelf uprights for you. Surcharge: 8.50 € | pc. plus 19% VAT. 06x Shelves, second choice (new) Article: ZB 4313 L Material color: grey Dimensions: 994 x 300 x 30 mm Weight / pc.: approx. 2,640 kg Max. load per shelf 100 kg with evenly distributed load 01x cross bracing, II. choice (new) Material color: sendzimir galvanized 24x open fronted storage box, II. choice (new) Manufacturer: SSI Schäfer Hsdpfx Asp T T Daocrjl Type: LF 322 Color: yellow Design: Recessed grip on the back Material: Polypropylene External dimensions (LxWxH): approx. 434 x 209 x 200 mm Internal dimensions (LxW): approx. 291 x 181 mm Usable height in stack: approx. 185 mm Capacity: 10.4 liters Stackable: yes Weight per unit: 0.780 kg Your contact at our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: as good as new (ex-display), Remark: This is a II. Wahl product, new product unused. II. Wahl means there may be dust deposits, minimal scratches or dirt or dirt may be present. Technical data for the unit carrier: Manufacturer: SSI Schaefer Rack system: R 3000 Included in delivery: 01x unit carrier, II. choice (new goods) Material color: sendzimir galvanized total length: approx. 780 mm clear span: approx. 715 mm dimension: approx. 40 x 35 mm (WxH) material thickness: approx. 1,50 mm Suitable for a shelf depth of 800 mm Hjdjn E Nffepfx Acrol Your contact person in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is offered for pickup only. A desired transport or shipment of this or a dispatch of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery can be requested from us.

Condition: as good as new (ex-display), Technical data for the shelving upright: Shelving system: Dexion Type: HI280 The scope of delivery includes: 01x Shelf rack upright, new II. Choice Material color: sendzimir galvanized Frame profile dimensions: 50 x 55 mm Adjustment grid: 25 mm Incl. bulkhead web and base plates The uprights are unassembled 2,100 mm high 400 mm deep Note: The shelving uprights are supplied unassembled when ordered. delivered unassembled. For an additional charge of 5.00 € / piece plus VAT, we can also pre-assemble the also pre-assemble the uprights. These are new goods, second choice unused. New goods, second choice means that there may be dust deposits or soiling may be present. Hodpfstrmfwox Acrol Currently available in stock: 30 pcs. Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, Wide span shelving, new Dimensions: L 2050 x H 3000 x D 800 mm incl. 4 shelves Shelf load: ~ 300 kg with evenly distributed load Hodocfbyhepfx Acrel #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic shelving consisting of: 2x shelf uprights, 800x3000mm unassembled, incl. cross and diagonal braces, plastic base plates 8x crossbars 1950 mm, incl. locking pins 4x insert shelves approx. 1930x745mm, Thickness: 22 mm

Condition: good (used), The scope of delivery includes: 01x shelf connector, used Material color: blue Manufacturer: Vogelsang Type: NS Hjdsi Hpkxepfx Acrel suitable for frame profile width: approx. 70 mm for shelf distance: approx. 250 mm dim. head plates: 130 x 60 mm profile dim.: U 62 x 45 mm Weight: approx. 1,660 kg | pcs. General information about the article: This article is offered for pick-up only. A desired transport or a shipment of this article is associated with additional costs, which can be requested separately depending on the delivery location or scope of delivery with us.

Condition: good (used), Technical data for the pallet racking system: Racking system: Mecalux Technical data for installation: Number of rack rows: 01 pcs. Length per rack row: approx. 30,700 mm Number of bays / row of shelves: 9 units of 3,300 mm each Number of levels plus floor level: 02 pcs. The scope of delivery includes 10x pallet rack uprights, used Material color: blue Upright type: A 103 Upright profile dimensions: P 100 x 79 x 3 mm Incl. cross and diagonal braces, base plates The uprights are pre-assembled ( bolted framework ) 2,000 mm high 1,100 mm deep 36x pallet rack beams, used Material color: orange Box profile: 120 x 50 mm Beam type: TB-S 120 clear width: 3,300 mm 72x integrated locking pin, used Material color: orange For securing the longitudinal beams against unintentional lifting out 40x bolt anchor, new Hodpfx Acetukqisrjl Manufacturer: Hilti Type designation: HST2 M12x105/10 Design: Carbon steel, galvanized Approved for: Cracked concrete 20x shim plate, used Design: completely galvanized For leveling the shelf uprights that are are set up on uneven floors 01x Load plate with details of bay and shelf loads, manufacturer and commission number Dimensions: 420 x 297 x 3 mm Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: good (used), Technical data for the side panel: Shelving system: SSI Schäfer Type: R 3000 The scope of delivery includes: Hjdpstul Ifsfx Acrel 01x side panel, used Designation: SWI 3422 for upright depth: 400 mm for frame height: 2,278 mm Material color: sendzimir galvanized Dimensions: 2.275 x 280 x 0.6 mm Weight per unit: 3.83 kg Your contact persons in our company: Mr.: Andre Evering Mr.: Mario Klöver Mr.: Falk Deutsch General information about the item: This item is only offered for collection. Any further desired transportation or a shipment of this article is associated with additional costs, which can be requested separately depending on the place of delivery or scope of delivery.

Condition: new, shelf height: 2,500 mm, Wide span shelving, new dimensions: L 2550 x H 2500 x D 800 mm incl. 4 shelves shelf load: ~ 250 kg with evenly distributed load #-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-#-# Basic rack consisting of: 2x shelf uprights, 800x2500mm unassembled, incl. cross and diagonal braces, Hedpfxocfby Tj Acrol plastic base plates 8x crossbars 2450mm, incl. safety pins 4x shelves 2430x745mm, thickness: 22 mm

Condition: good (used), Technical specifications for shelf panel: Racking system: SSI Schäfer Type: R 3000 Scope of delivery includes: shelf panels, used Material color: Sendzimir galvanized total width: approx. 1,295 mm total depth: approx. 790 mm for upright depth: approx. 800 mm height: approx. 40 mm number of reinforcement beams: 2 pcs Weight / pcs.: approx. 12.82 kg Currently available in stock: 1,338 pcs. Your contacts at our company: Mr. Andre Evering Mr. Mario Klöver Mr. Falk Deutsch General information about the item: Hjdswvq Epspfx Acrol This item is only offered for collection. Any transportation or shipping of this item involves additional costs, which can be requested from us depending on the delivery location and/or scope of delivery.