Used Carnaghi Lathe for sale (9)

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, Technical details faceplate diameter 1800 mm swing diameter 2000 mm turning height 1270 / 1120 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min cross rail - adjustment 400 mm ram head - cross travel (X) -2770 / +2275 mm ram head - vertical travel (Z) 1250 mm c-axis 360° (0,001°) deg milling drive 37 kW turning speed range - milling 10 - 3000 U/min power capacity - table 100 kW Torque 31784 Nm feed range (X/Z) 0,1 - 15000 mm/min weight of the machine ca. 55 t Additional information Used CNC vertical lathe for turning, drilling and milling First machine installation in the year 2011. Max. workpiece diameter: 2040 mm Max. workpiece height: 1270 mm Ram stroke: 1250 mm Max. workpiece weight: 5000 kg (per pallet/chuck) Table speed range: 1.0 - 320 rpm Table drive motor: 100 kW Drilling and milling spindle: 37 kW Crossbar travel: 2 steps of 200 mm each Total electrical connection value: 218 kVA CNC control: Siemens 840 D Number of NC axes: 4 (X, Z, C, crossbar adjustment) Travels: X-axis: -1650 to + 2165 mm Z-axis: 1250 mm Rapid traverse X- Z-axis: 15 m/min Number of tool magazine spaces: 80 spaces in the chain magazine, of which 60 x HSK 100 and 20 x Capto C6 Disc magazine 12-pos. for rotary holders and attachment heads Ffodsx S Efpspfx Abmet Coolant system with filter and circulation unit Chip conveyor Oil-mist-extractor 1 pallet with jaws, diameter 1800 mm 1 hydraulic chuck with base jaws, diameter 1800 mm Various drilling and milling heads 2 measuring probes Several turning tool holders Special feature: Pallet changer with two stations, equipped with a face plate Ø1800 mm and a six-jaw lever compensation chuck with mechanical centrifugal force compensation Ø1800 mm. Note: The machine is in a pit. Condition description: The cross roller bearing on the Carnaghi was replaced about half a year ago. The Siemens components in the control cabinet were also completely replaced at the end of 2023. The machine also has a measuring probe for tool measurement and an external Renishaw measuring probe for workpiece measurement. As a special feature, the machine also has a measuring probe installed on the Z-axis (Z1-axis). This brings an advantage in terms of accuracy and time, as the tool does not have to be put down for measuring. However, it is currently shut down and should be overhauled when it is put back into operation. The machine also has a Rotomors six-jaw lever compensating chuck with centrifugal force compensation, which was completely overhauled in 2020/21.

Condition: used, Year of construction: 2009, faceplate diameter 1800 mm swing diameter 2000 mm turning height 1500 mm Control SIEMENS 840 D workpiece weight max. 5000 kg ram head dimension 250 x 250 mm table turning speeds 1 - 320 U/min power capacity - table 100 kW Torque 31784 Nm total connected load 218 kW weight of the machine ca. 55 t Turning- and Boring heads: - 4 x Turning heads + steelholders - 3 x Turning heads for Capto - 1 x Boring head (driven) - 2 x angular boring heads (Manufacturer Benz) Dimensions: - Turning diameter on the faceplate 2000 mm - Faceplate diameter 1800 mm - Turning height with turning head L100 1500 mm Power on the ram: - Clamping force of tool holder or accessories 120,000 N - Max. Feed force Z and X axis 30,000 N - Drive power of the milling, drilling and grinding spindle 37 kW - Speeds for turning 10 - 3000 rpm Travels: - Axis X, horizontal support on the crossbeam -2270/+2275 mm - Axis Z, vertical support on crossbeam 1250 mm - Axis C, table rotation 360° Feed speeds: - Axis X 15,000 mm/min - Axis Z 15,000 mm/min - Axis C 3.25 rpm Coolant system: - Coolant system filter system 1500 l Ffedovylilopfx Abmet Chain tool magazine with 80 places: - max. tool weight 30 kg - Max. tool diameter with free auxiliary slots 250 mm Disk magazine with 12 slots: - max. weight of tool holders/accessory units 150 kg - max. length of tool holders 500 mm - max. magazine load 1000 kg Pallet changer with 2 pallets: - Pallet diameter 1800 mm - Pallet load capacity (centered) 5000 kg - Pallet load capacity (on center) 4000 kg Equipment / accessories: - 1x pallet with claw boxes, diameter 1800 mm - 1x hydraulic chuck with base jaws, diameter 1800 mm - Various drilling and milling heads - Various turning tool holders - 2x measuring probes

Condition: ready for operation (used), Year of construction: 1980, functionality: fully functional, P. CARNAGHI AC 20 CNC VERTICAL LATHE Table Ø 2,000 mm. Max. turning Ø 2,500 mm. Max. turning height 1,600 mm. Max. height under crosspiece 1,600 mm. Table capacity 20 Tons Table motor power 59 kw. Table speed 2.7 ÷ 130 rpm. N. 1 vertical cnc ram carriage: - vertical stroke 1,200 mm. - section 240 x 240 mm. Cross travel 1,450 mm. Cnc ECS Total weight 35 tons. Year of construction/revision 1980/2016 Ffjdpfx Aetq Eg Rsbmet Complete with: - chip conveyor - Tool Holders 12 nos.

Condition: good (used), Year of construction: 1998, functionality: fully functional, machine/vehicle number: 97485, turning height: 1,600 mm, workpiece weight (max.): 7,000 kg, turning diameter over cross slide: 1,700 mm, turning diameter: 1,600 mm, feed length X-axis: 2,000 mm, feed length Z-axis: 1,250 mm, feed rate X-axis: 3,000 m/min, feed rate Z-axis: 3,000 m/min, total height: 6,765 mm, total width: 8,300 mm, total length: 9,000 mm, rotary table diameter: 1,300 mm, rapid traverse X-axis: 15,000 m/min, rapid traverse Z-axis: 15,000 m/min, torque: 26,300 Nm, spindle speed (min.): 2 rpm, spindle speed (max.): 380 rpm, table load: 7,000 kg, table diameter: 1,300 mm, overall weight: 40,000 kg, cone diameter: 50 mm, milling spindle motor power: 40,000 W, milling spindle speed (max.): 3,000 rpm, Pietro Charnaghi AC 16 TM Fedpewmbbvofx Abmoft Siemens Sinumerik 840C For tecnichal detals look at pictures

Condition: ready for operation (used), Year of construction: 1997, Model: TG20/2500 CNC: SIEMENS 840 C Turning diameter: 2500 mm Table diameter: 2000 mm Turning height: 2000 mm Max. table load: 20,000 kg Max. table speed: 2–250 rpm Ffsdpfxexwp D Do Abmot Number of speed ranges: 4 Table motor power: 60–100 kW Z-axis travel: 1,500 mm Ram section: 250 x 250 mm Rapid traverses: 10,000 mm/min Milling speed: 0–4,000 rpm Milling motor power: 37 kW Driven tools

Condition: good (used), Year of construction: 1998, functionality: fully functional, workpiece weight (max.): 10,000 kg, FMS with Pietro Charnaghi AC 16 TM and Colgar Prog 213 TR 120-90 Fedpswma H Rofx Abmeft Both Siemens Sinumerk controller 7 stk. Palett Ø1300mm

Condition: reconditioned (used), Year of construction: 1985, Carnaghi AC 15 Twin Ram CNC Vertical Grinder with Dual R&D MTC 2x-G Controls (1985, overhauled in 2008) SAV Ø1,500mm Magnetic Chuck. Maximum Machining Ø1,500mm, Maximum Machining Height 500mm. Approx Maximum Swing Ø1,800mm. Grinding Wheel Mounts 127mm. Balancing SLS: Company MPM both supports. Both Rams Can Be Pivoted. Overhaul S/No. 10.3442.01 (1985, overhauled in 2008) Fjdjx Swxnepfx Abmsft With Dual Roller Diamond Dressers, Dual MPM Digital Balancer & Hydraulic Tank. Approx Overall Dimensions L4.9 x W3.9 x H3.92m.

Condition: ready for operation (used), chuck outer diameter: 1,200 mm, controller model: E.C.S CNC 1402, empty load weight: 17,000 kg, 5000 kg maximaal op tafel KM 50 gereedschappen Max turningdia -- passage: 1400 mm Power on the spindle: 60 kW Max longitudinal travel X-axis: 2700 mm Ffjdoxqh R Njpfx Abmet Max hight of workpiece Z-axis: 750 mm Number of speeds: 2-430 rpm - max 450 Nm Power needed: 3 x 380 V TOOLING: yes Turret: yes Qty Tools: 24 Coolant pump: yes Light: yes

Condition: ready for operation (used), chuck outer diameter: 1,600 mm, controller model: E.C.S CNC 2600, Mario Carnaghi TG10/1600 - Ø 1700 mm CNC Max turningdia -- passage: 1700 mm Power on the spindle: 70 kW Max longitudinal travel X-axis: 1965 mm Max hight of workpiece Z-axis: 750 mm Number of speeds: 3.5 - 300 rpm TOOLING: yes Ffjdpfjxqh R Aox Abmjt Turret: yes Qty Tools: 12 Coolant pump: yes Light: yes