Used Casio Te 2200 for sale (128,641)

Year of construction: 2012, condition: good (used), - for foils, cork, veneer etc. - Rotary cross section - cutting width max. (mm): 2100 Gtsdpfxon Hxiie Abdet - heating: included - cooling: included

Year of construction: 2025, condition: as good as new (ex-display), functionality: fully functional, machine/vehicle number: S25Synthesi01, Stretch Winder Synthesi Gtsdjx Ta R Njpfx Abdst TECHNICAL DETAILS Turntable / base frame / Ø 2,200 mm Max. pallet dimensions: 1,550 x 1,550 mm Max. load capacity: 2,000 kg Wrapping height (pallet included) 2,200 mm FILM SLIDE TYPE "OPRS - ONE PRE STRETCH" Film pre-stretch ratio set to 200% Foil application tension electronically adjustable in the programs in different steps Height of turntable 75 mm Height query by light button Frequency-controlled turntable drive (soft start - start/stop) Frequency controlled carriage speed up/down Signal tone at the start of wrapping and stop at the end of the cycle Emergency stop switch according to CE regulations The turntable always stops in the same starting position Fall protection for the film slide Push button for switching on the machine and start & stop function & reset according to CE standards Ø 22 mm ADJUSTABLE PARAMETERS ON THE CONTROL PANEL All function parameters can be set via the display F00 - Screen lock program change F02 - Infinitely variable turntable speed 5-12 rpm Lifting carriage speed can be adjusted up and down independently of each other F03 - lifting carriage speed up from 1.3 up to 5.4 m/min F04 - carriage speed down from 1.3 to 5.4 m/min F05 - Number of wraps on the pallet foot (1 - 10 wraps) F06 - number of wraps on the pallet head (1 - 10 wraps) F09 - Winding height photocell delay F13 - F16 - Foil application tension foot & head wrapping / ascent & descent independently adjustable F62 - Ergonomic height for film change Foil consumption display (optional) ADJUSTABLE WRAPPING PROGRAMS ON THE CONTROL PANEL 6 storable winding programs F01 - 1 - cross winding (up/down) F01 - 2 - Single wrap (only up or only down) F01 - 3 - Push button for manual functions F10 - F11 - Wrap cycle with preset start and stop height F12 - Winding to a stored height (switching off the light button for the height) F22 / F23 - Winding cycle for cover sheet film F29 - Soft start cycle for edge protection application F30 - F31 - Wrap cycle with gain and adjustable number of wraps Soft start to reduce film tears on sharp pallet edges Winding cycle with manual or motorized line formation (optional) Reinforcement cycle via push button Optionally possible: Turntable size up to Ø2600 mm Mast height up to 3900mm ramp mounting frame Light scanner for black products cutting device Etc. Other systems available from the Ludwigsburg warehouse. Some images may contain options that are subject to a surcharge. Illustration similar

Condition: good (used), Marel Stainless Steel floor weighing scale Marel weigher indicator M2200-P02 110-230 Vac, 0.24-0.12 A Dimensions scale: 900 mm x 900 mm. Gedpex Il Ntofx Abdjtt

Year of construction: 1984, condition: used, Technical details: drum revolutions: 16 rpm U/min speed down: min./max.: 0,23 / 0,34 m/sec. operating pressure: 85,3 Psi - ca. 6 bar bar traction force - max.: 15 traction force: min: 10 kN weight: 389 kg dimensions L x W x H: 1,1x0,9x0,75 m - pneumatic rope winch - stable steel construction - floor plates size: 700x340mm - display via manometer - pressure connection via 1 inch thread - drum brake - dimension of the rope drum: Ø 400 x Ø 250 x 230mm Godsu Nv Ubjpfx Abdett - without rope!!!! *

Condition: used, Year of construction: 1988, pressure 200 t Gtsdpfsvut S Dox Abdet stroke 30 - 160 mm no. of strokes 40 - 120 /min distance between columns 1500 / 1300 mm dayligth (stroke and adjustment up) 860 mm column travel -side 600 x 530 mm table surface area 1250 x 1250 mm hole in the table 550 x 300 mm table height over floor 1000 mm ram surface 1250 x 1000 mm ram adjustment 125 mm material width 30 - 500 mm material thickness 0,5 - 3,0 mm feed length 0 - 999,9 mm power requirement 50,0 kW Weight 34,00 t dimensions of the machine ca. 4,0 x 1,7 x 5,2 mxmxm permitted for automatic mode according to the German Safety Regulations (UVV) with infinitely variable drive, pneumatic clutch/brake combination (Ortlinghaus), hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, automatic stroke adjustment

Condition: good (used), Year of construction: 1994, functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Gedpjvyuy Hsfx Abdett Magnet power 2,2 kW; Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: used, axle configuration: 2 axles, first registration: 03/2011, loading space length: 8,580 mm, loading space width: 2,550 mm, suspension: steel, tire size: 235/75R17,5, wheelbase: 1,400 mm, Year of construction: 2011, Equipment: crane, Drivetrain Gtedpfx Abouc Dvdedst Drive: Wheel Axle configuration Tyre size: 235/75R17,5 Suspension: leaf suspension Rear axle 1: Double wheels Rear axle 2: Double wheels Weights Empty weight: 8.050 kg Carrying capacity: 24.950 kg GVW: 33.000 kg Functional Mast: telescopic (2 parts) Make of bodywork: CASTERA 2SS33T Height of cargo floor: 92 cm

Condition: excellent (used), Year of construction: 2005, UV dryer year 2005 ESC / Technigraf UV dryer Aktiprint UV 60/2 US52212 2 x 120 W/cm refurbished machine, very good condition 2 lamps with 120 W/cm, 600 mm working width Half and full load switchable, with lamp cooling ozone extraction and adjustable vacuum cassette. Infinitely variable belt speed New conveyor belt Gjdpfx Absfh Inusdstt New lamps, new frequency converters new measuring device UV-Integrator Full-UV with integrated heat shield and calibration certificate

Condition: new, Factory-new agitated vessel with dissolver Type: STOC2200RWD Volume: approx. 2,266 liters Design: Vertical construction on three height-adjustable feet Construction: Single-walled Medium-contacting material: 1.4301 stainless steel (AISI304) Surface: External satin finish, internal BA (IIId) Internal weld seams: Pickled, passivated and brushed Max. operating pressure: Atmospheric Max. operating temperature: 95°C Top: 15° conical top Bottom: 15° conical bottom with central outlet DN50 DIN11851 Tank dimensions: Tank diameter: 1,430 mm Cylinder height: 1,250 mm Total height: 2,160 mm Foot height: 500 mm Outlet to floor distance: 350 mm Equipment: 1x Ø 500 mm manway cover with swivel bracket on top, EPDM gasket 1x agitator flange connection IEC200 3x calotte / height-adjustable feet 1x stainless steel vent/bleeder valve DN50, non-pressurized, on the top Gtsdpfxew Dy Hlo Abdet 1x DN50 DIN11851 outlet port centered in the bottom 1x DN50 DIN11851 port with blanking cap on the top 1x DN65 DIN11851 port with blanking cap on the top 2x lifting lugs on the top 1x ladder bracket on the cylinder 1x nameplate Agitator: Dissolver Manufacturer: Schwarzer Rührtechnik GmbH Type: SRTDMK/7.5-1500 Power: 7.5 kW Speed: 1,410 RPM Operating voltage: 3PH 400V - Heavy-duty agitator shaft mounted to the agitator motor with muff coupling - Agitator shaft dynamically balanced for smooth running within the speed range - 1 piece dissolver disc Ø 275 mm screwed onto the end of the agitator shaft - Stainless steel flange with V-ring seal, EPDM - Motor mounted flexibly on neoprene rubber-metal buffers

Condition: used, Description: Pipetting Robot / Liquid Handler Manufacturer: Tecan Type: EVO-2 200 Accessories: User manual Instrument Software 6.4 Various cables Various small parts Sample carriage Item condition: Used item as shown in the pictures you are welcome to inspect the goods in advance Contact us if you have any questions Shipping: The stated shipping costs apply to deliveries within Germany Godjwp Hiqjpfx Abdstt Worldwide shipping (inquire for shipping costs outside Germany) Worldwide shipping (please kindly request shipping costs) The given shipping costs apply to a shipping within Germany Sale only to businesses without warranty or guarantee. Deviations in technical data and errors in the item description may happen and are reserved.

Condition: new, Year of construction: 2025, PFEIFER technology skyCUBE P class 1250 x 1250mm - 200W CO2 laser The flatbed laser center (* Prices depending on equipment, this is a brand new laser machine from our production) The multifunctional flatbed laser center skyCUBE, produced by PFEIFER technology in Saxony/Germany, was developed for your professional cutting tasks and classic laser engravings. It combines high productivity with economy and precision. Your purchase will therefore pay for itself after a short time. The machine housing, made of welded and screwed steel construction, is designed for industrial and commercial use. The drive system developed by PFEIFER technology ensures precision and high repeat accuracy. skyCUBE laser devices meet all requirements of class 1 according to DIN EN 60825-1 and thus offer you the highest level of safety. The ergonomic design with a pull-out work table makes it easier to load the system. A drawer in the lower part of the machine is used to collect the clippings. Simple, user-friendly and intuitive - the skyCUBE PC software makes planning, executing and controlling your production tasks child's play. The processing of your project data takes place via levels (colors), whereby the order and processing type can be specified separately for each level. The determined parameters can be permanently stored and retrieved in a material database. The laser programs are transferred to the machine control with a computer connected via a LAN/USB interface. A modern touch control panel gives you access to all system information and functions. Laser processing center skyCUBE at a glance: German industry standard Machine steel construction for safe and vibration-free accommodation of the laser components and axis systems, on rollable industrial leveling feet 8" touchscreen display simply see more, control more, communicate more with the skyCUBE laser processing center Redundant safety system - Class 1 laser Safety: Shutter --ᐳ active mechanical beam path shutter pull-out work table drawer integrated access and observation hatch pull-out clippings drawer Air-washed optics - filtered air supply to all laser components to protect the optics program-controlled process gas control Drive system developed by PFEIFER technology for precision and high repeatability PFEIFER technology mirrors and optics for perfect results with laser engraving and cutting CO2 laser IRADION®, SYNRAD®, laser sources for perfect laser beam quality and quality over a long period of time tested and stable brand power supplies according to the laser source Gtjdpscwpkpofx Abdjt illuminated machine interior Easy-to-learn operation even without advanced CAD knowledge Safety: BG certified emergency stop / door and safety monitoring Security: Key switch to prevent unauthorized use of the system central vacuum engraving cut fume extraction port Multifunctional cutting table with low-reflection, removable support elements for laser material processing Optionally available: Laser source and optical system according to application specifications PFEIFER technology linear motor for X/Y axis

Year of construction: 2017, operating hours: 3 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 2051476364, From our demonstration tool inventory, tested and fully functional: Godpfxsv Imyue Abdett Used Desoutter SDT035-T2200-R4Q pneumatic pistol screwdriver with ratchet clutch with trigger start Output: Hex 1/4" Torque: 1.0 to 3.5 Nm / 8.9 - 31 in.lb Idle speed: 2200 min-1 Length: 212 mm Weight: 1.1 kg Other tools for industrial production and maintenance on request.

Condition: refurbished (used), Year of construction: 2006, operating hours: 2,220 h, functionality: fully functional, fuel: electricity, Equipment: second-hand vehicle warranty, TENNANT S12 SWEEPING MACHINE NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS 24V 25A CHARGER NEW AIR FILTER 2006 year of production The mileage of the machine is 2220 hours The new roller brush in combination with the new side brush ensures an excellent sweeping result A high-efficiency dust extraction turbine and new protective rubbers around the main brush prevent fine dust and dust from being swept up. The device after a general, meticulous renovation, operating fluids and parts such as bearings, drive belts, protective rubbers and filters have been replaced with new ones. Each device we offer has individually taken photos, you buy exactly the machine you see TECHNICAL DATA: Sweeping width (with side brush): 90 cm Waste tank capacity: 85 L Filter area: 4.5 m² Practical / theoretical capacity: 4650/6820 m²/h Weight (with batteries): 447 kg Noise Level: 72dB(A) Top speed: 6.2 km/h Gradeability: 18% INCLUDED: NEW GEL BATTERIES 6V 175Ah (SIAP) (4x) NEW NEOS 24V 25A CHARGER NEW AIR FILTER New Roller Brush - PPN 0.7 Bristles New side brush New roller cover rubbers THE MOST IMPORTANT FEATURES: The ergonomically designed cockpit as well as the centrally placed operator's seat ensure good visibility of the cleaned surface The Tennant S12 Sweeper is the perfect machine for efficient, economical sweeping of multi-storey car parks, warehouses and production buildings, and outdoor spaces Battery power supply provides high flexibility, enabling operation also in closed places, buildings, warehouses Gsdpfx Ajm Uc Umobdott The large working width (900mm) ensures high surface efficiency Very legible and intuitive control panel.

Condition: reconditioned (used), Year of construction: 2003, Asteca 2200x5500 double decker screens Gtjdoim D U Aepfx Abdjt Asteca double deck screens on chassis Spring springs Metal structure 30hp engine

Condition: used, mileage: 524,282 km, power: 265 kW (360.30 HP), first registration: 11/2008, fuel type: diesel, tire size: 315/80 R 22.5, axle configuration: 4x2, wheelbase: 4,200 mm, fuel: diesel, color: blue, driver cabin: sleeper cab, gearing type: mechanical, emission class: euro5, suspension: steel-air, total length: 8,000 mm, total width: 2,520 mm, Year of construction: 2008, Equipment: ABS, AdBlue, EBS, air conditioning, airbag, differential lock, electric window regulation, onboard computer, power assisted steering, power mirror, trailer coupling, = Additional Options and Accessories = - External thermometer - Heated mirrors - Passenger seat - Leaf suspension - Roof hatch - Differential lock - Digital tachograph - Refrigerator - Air suspension - Air-suspended seats - Radio/CD player - Reversing camera - Sleeper cab - Side door - Sun visor - Stability control - Power take-off (PTO) - Towing hitch = Further Information = Tyre size: 315/80 R 22.5 Brakes: Disc brakes Front axle: Max. axle load: 9,000 kg; Steered; Tyre tread left: 30%; Tyre tread right: 30%; Suspension: leaf suspension Rear axle: Twin tyres; Differential lock; Max. axle load: 11,500 kg; Tyre tread left inner: 70%; Tyre tread left outer: 50%; Tyre tread right inner: 90%; Tyre tread right outer: 40%; Reduction: single reduction; Suspension: air suspension Number of cylinders: 6 Engine displacement: 12,902 cc Gedpfx Abew Enp Rsdott Unladen weight: 15,420 kg Payload: 5,080 kg Gross vehicle weight (GVW): 20,500 kg

Condition: ready for operation (used), Indramat TDM 1.2-050-300-W1-000 Controller SN:23450022000, professionally completely overhauled and tested with 12 months warranty, 100% functional, scope of delivery as per photos Gjdji Ebm Rspfx Abdstt

Condition: new, power: 375 kW (509.86 HP), fuel type: diesel, empty load weight: 16,655 kg, overall weight: 26,000 kg, tire condition: 80 %, axle configuration: 3 axles, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, onboard computer, parking heater, truck registration, | VOLVO FH500 6x4 3-sided Meiller tipper | Palfinger PK22002 EH radio remote control (piano remote control) | 5 drawers with Rodator | loading area container width without rear corner posts, | leaf/air suspension | EURO6, I-Shift, retarder | automatic, multifunction steering wheel | air conditioning, heated seats, navigation system, refrigerator, | lane departure warning system, emergency brake assistant, | partial leather equipment, auxiliary heating, | trailer hitch | differential lock, | body length approx.5m | Subject to errors, input and prior sale. Gsdpfx Absvia Smjdjtt

Condition: excellent (used), -Dimensions (LxWxH): 350x650x800 mm -Water outlet Ø: 32 mm -Water inlet: 3/4'' (internal thread) -Water pressure: min 2 - max 6 bar -Max. water inlet temperature: 60 °C -Tank capacity: 20 litres -Water quality: soft water -Voltage: 400 V -Power: 6.1 kW -Frequency: 50 Hz Gtodpswyc Uqofx Abdet -Sold without stand -Year of manufacture: 2019 -With automatic lifting

Condition: new, pressure: 125Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 11weight approx.: 8000messurements (LxWxH): 1800 x 1500 x 2600 Gedpfx Abjktm N Dodjtt

Condition: new, power: 368 kW (500.34 HP), fuel type: diesel, empty load weight: 16,535 kg, maximum load weight: 9,465 kg, overall weight: 26,000 kg, tire condition: 80 %, axle configuration: 3 axles, brakes: retarder, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, number of seats: 2, front tire size: 385/65R22,5, rear tire size: 315/80R22,5, Equipment: ABS, additional headlights, air conditioning, central locking, compressed air brake, crane, cruise control, differential lock, onboard computer, parking heater, truck registration, | VOLVO FH500 6x4 3-sided HAMA tipper | Palfinger PK22002 EH radio remote control (piano remote control) | loading area container width without rear corner posts, | leaf/air suspension | EURO6, I-Shift, retarder | automatic, multifunction steering wheel | air conditioning, heated seats, navigation system, refrigerator, | lane departure warning system, emergency brake assistant, | partial leather equipment, auxiliary heating, | trailer hitch | differential lock, | body length approx. 5m | Subject to errors, input and prior sale. Gtjdjxcar Ajpfx Abdet

Condition: new, pressure: 150Tappet adjustment: (automatische Verstellung) 40stroke lenght (max.): 10-125total power requirements: 15weight approx.: 9500messurements (LxWxH): 1800 x 1500 x 2600Stroke/min: 50-90 Machine Technical SpecificationsCE Compliance: The machine and all equipment are manufactured in accordance with CE regulations Light Curtains: SICK or PILZ PLC Control: Siemens S7-1200 Stroke Adjustment: Directly via the touchscreen interface Balancing System: Integrated Stroke Speed Adjustment: Via Mitsubishi frequency inverter Machine Frame: Full steel construction Guidance System: Inner and outer eccentric guides Crankshaft: Made of hardened 4140 steel Clutch & Brake: Pneumatic combination system Safety Valve: Dual-way safety valve Safety PLC: SICK or PILZ Operation Modes: Two-hand operation and foot pedal available Lubrication: Automatic centralized lubrication system Overload Protection: Hydraulic overload system Safety Guarding: Protective enclosure around the working area External I/O: 8-pin I/O ports on PLC (for external connections and signal exchange) Anti-Vibration: Rubber dampers under the machine feet (1 pair – 4 pieces) Power Supply: 400 V / 50 Hz Required Fuse: 32 A Control Panel: 19 Siemens touchscreen ? Main Technical DataOperation Modes: Inch / Single stroke / Continuous stroke Press Force: 150 tons Table Dimensions: 750 × 1000 mm (fixed table) Stroke Length: 10–125 mm (automatically adjustable via PLC) Ram Dimensions: 500 × 800 mm (Ø55mm pin receptacle & T-slots customized to customer needs) Stroke Rate: 50–90 strokes per minute Main Motor: 15kW (1,400 rpm) Throat Depth: 325 mm Shut Height: 475 mm (adjustable down to 295 mm) Gtedstqwtdspfx Abdot Ram Bore Diameter: 50 mm Machine Dimensions:Length: 1,800 mm Width: 1,500 mm Height: 2,600 mm Machine Weight: approx. 9,500 kg Ram Adjustment: 40 mm (automatic adjustment)

Condition: used, Mélangeur à ruban Kemutec d'occasion, entièrement testé, d'une capacité d'environ 400 litres (en fonction du produit) en acier inoxydable 316. Le bac mesure environ 1680 mm de long x 580 mm de large x 700 mm de profondeur. Il est équipé d'un ruban en acier inoxydable à interruption unique, entraîné par un moteur et un réducteur de 5,5 kW. L'unité comprend un couvercle à charnière en acier inoxydable avec des pinces. Comprend une vanne de vidange par le dessous. Specifications: Capacity: 14.1 ft³ Material of construction: 316 stainless steel Width: 22.83" Horsepower: 7.4 hp Length: 66.14" Jacket: No Gjdpfx Aox Rylzjbdott

Condition: like new (used), Year of construction: 2007, operating hours: 121 h, type of cooling: water, input frequency: 50 Hz, For sale is a used FG Wilson P2200 emergency generator with a Perkins V16 engine, in mint condition. Technical data : Manufacturer: FG Wilson ( England ) Engine : Perkins engine V16 , 16 cylinder turbo diesel Type number : 4016 TAG2A Generator : Leroy Somer Power : 1700 KW / 2125 KVA Frequency : 50 Hz Voltage : 230/400 Volt RPM : 1500 rpm. Year of manufacture : 2007 Operating hours : approx. 121 hours Condition : as good as new Complete with Woodward EGCP-2 control unit Incl. water cooler mounted directly on the frame in front of the engine. Incl. 4 x new batteries The system ran until the end as an emergency generator and was regularly serviced by a specialist company. (All test reports under full load are available). Incl. all documentation, wiring diagrams Location: 24229 Dänischenhagen Gtodpfxeudlw Se Abdjt It can be viewed on site at any time.

Condition: excellent (used), For sale: crimping tool for AMP 656075-1 TE Connectivity connectors. Gjdpew Svqnjfx Abdstt

Condition: used, Year of construction: 1998, Hot-melt Case Sealer – Overview This used hot-melt case sealer by TE-CO is engineered for end-of-line industrial packaging within a used bottling line. The model 607-98 provides reliable, consistent closure of corrugated cartons using a hot-melt adhesive system, making it a proven solution for beverage production environments where wine bottles in cases must be sealed securely prior to palletizing. With robust construction and straightforward operation, it integrates seamlessly with upstream case packers and downstream palletizers to support continuous operation and optimized throughput. Godpfx Aoxywf Isbdjtt Manufactured by TE-CO, this second hand unit focuses on dependable carton closure, ensuring clean glue application, tight seals, and minimal maintenance demands. It is especially suitable for cases containing glass bottles in common formats used by wineries and beverage producers. Designed to work as part of a complete used bottling line or as a stand-alone machine with compatible conveyors, the 607-98 aligns with industrial packaging best practices for efficiency and product protection. Technical Specifications & Performance Data Manufacturer: TE-CO Model: 607-98 Year of manufacture: 1998 Sealing method: Hot-melt (glue) adhesive Application: Case/carton sealing after case packing Typical use: Wine bottle cases within a used bottling line Compatible bottle formats in cases: 0.75L, 1.0L, 1.5L Construction: Industrial end-of-line machine for continuous operation Operation: Inline with case packer upstream and palletizer downstream Advanced Automation & Control Systems The TE-CO hot-melt case sealer is designed for dependable automation in industrial packaging. Typical features include adhesive temperature control for consistent bonding, synchronized infeed and outfeed for smooth case flow, and safety interlocks for protected operation. Operator-friendly controls support quick adjustments and stable performance during format changes. The hot-melt application system helps deliver clean, repeatable glue patterns to ensure secure, uniform sealing. Production Line Integration Capabilities This case sealer integrates naturally into a used bottling line, operating immediately after a case-packing monoblock and before palletizing. It can be synchronized with upstream equipment such as erecting and packing systems and connected downstream to palletizers for automated material handling. The machine supports inline operation with standard conveyors and can run as a stand-alone sealer when properly fed. Machine Condition & Maintenance History The machine is presented as ready for operation within a second hand used bottling line context. Safety features and documentation are available, supporting commissioning and routine maintenance. Its industrial build promotes reliable service in beverage production environments.