Used Central Lubrication for sale (10,880)

Condition: good (used), mileage: 526,917 km, power: 346 kW (470.43 HP), first registration: 07/2020, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 10x4, wheelbase: 7,150 mm, fuel: diesel, color: other, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: other, number of seats: 2, total length: 9,820 mm, total width: 2,550 mm, total height: 3,500 mm, Year of construction: 2020, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, power mirror, seat heater, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Short cab - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Fabric - Blind spot sensor - Central lubrication Number of axles: 5, Configuration: 10x4, Payload: 29185 kg, Unladen weight: 17815 kg, Gross vehicle weight: 47000 kg, Total tank capacity: 300 liters, Fifth wheel coupling: Fixed, Number of differentials: 2, Central lubrication, Suspension type: Air suspension, Type of cab: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Electric windows, Electric mirrors, Radio/cassette, Color: Multicolor, Heated mirrors, Reversing camera, Type of lighting: Halogen lamp, Seat heating, Bluetooth, Blind spot sensor, Flashing lights, Engine power: 346 kW (464 Hp), Fuel: Diesel, Euro: 6, Gearbox type: AS-Tronic, Gearbox type: ZF, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Starter battery, Number of pages: 1 page, Pump, Central locking, Seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual Gearbox Gearbox: ZF, 12 gears, Automatic Axle configuration Axle 1: Tire size: 385/65R22.5; Steered; Tire tread depth left: 9 mm; Tire tread depth right: 9 mm; Brakes: Disc brakes; Suspension: Leaf suspension Axle 2: Tire size: 385/65R22.5; Steered; Tire tread depth left: 8 mm; Tire tread depth right: 13 mm; Brakes: Disc brakes; Suspension: Leaf suspension Axle 3: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 1 mm; Tire tread depth left outer: 1 mm; Tire tread depth right inner: 1 mm; Tire tread depth right outer: 1 mm; Brakes: Drum brakes; Suspension: Air suspension Axle 4: Tire size: 315/80R22.5; Double tires; Tire tread depth left inner: 2 mm; Tire tread depth left outer: 2 mm; Tire tread depth right inner: 3 mm; Tire tread depth right outer: 3 mm; Brakes: Drum brakes; Suspension: Air suspension Axle 5: Tire size: 385/65R22.5; Lift axle; Tire tread depth left: 7 mm; Tire tread depth right: 8 mm; Brakes: Disc brakes; Suspension: Air suspension Weights Unladen weight: 17,815 kg Payload: 29,185 kg GVW: 47,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 2 Financial information Leasing price: 1,205 € per month (default, 72 months); Ask for more information and conditions Identification License plate: 01-BPR-3 Kleyn Trucks is one of the world's largest independent dealers in used vehicles. Here you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? It's simple! • Large, rapidly changing stock • Recognizable quality • A good price • Correct business practices • We speak many languages • We understand our customers • Support with import and transport • (Export) registration can be arranged quickly • Expert technical services Nodpfeycp T Rox Afwjlf • The security of "recognizable quality" • And more.... Please visit our...

Condition: excellent (used), Year of construction: 1972, total power requirement 22 kW weight of the machine ca. 8 t Q U O T A T I O N We are pleased to offer you ex our stock, subject to prior sale, and error in technical data : DISKUS Double Disc Surface Grinding Machine in C-form with rotary workpiece feeding Nedpfoxqrbxsx Afwelf system and automatic dressing cycle model DDS 600 RAM year 1972 / 2002 modernized Serial no 6967 _____ Grinding wheels Ø, each 600 mm Grinding wheels bore x height, approx. 75 / 150 mm Grinding wheel speeds Upper wheel 95 – 955 rpm (3-30 m/s) Lower wheel 765 rpm (24 m/s) Grinding spindle drive, each 30 kW Workpiece dimensions: Grinding width (or workpiece diameter) approx. 20 - 120 mm Grinding (workpiece) height max 50 mm Hydraulic infeed impulse 0.0025 – 0.05 mm Total feed way 150 mm External Ø of workpiece carrier disk 810 mm Feeds of rotary workpiece feed system, infinitely variable 25 – 241 mm/s Total electrical load, approx. 50 kW - 380 V - 50 Hz Weight, approx. 8,000 kg Accessories / Special Features: • In 2002 updated IONIC gauge control Model 17A with monitor and direct input of workpiece data including tolerance range, workpiece counting, statistics. The workpieces are continuously measured via two opposite tracer heads, automatically triggering an hydraulic infeed when needed. • Rotary workpiece feed system with Workpiece carrier wheel (Ø 800 mm) and infinitely variable speed adjustment. • Workpiece height check to avoid crashing with griding wheels • Automatic hydraulic dressing device between the two grinding wheels for simultaneous dressing of both wheels. Dressing cycle can be preset (no. of workpieces/time). Hydraulic return of upper grinding slide to original position/workpiece/thickness (saves a lot of time). • ELBARON Oilmist Extractor with stand and adjustable suction cone • Walkable steel podium for easy machine operating and monitoring • Grinding wheel exchanging device, various spare grinding wheels • Central lubrication using grease and oil mist * Separate switch cabinet. * Separate hydraulic unit. • Currently no coolant filtration device available (can may be supplied separately). This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Bearing rings, Piston rings, washers, hydraulic parts, and other pressed parts.) Condition : very good ! Very well maintained ! Please click here to soon view a video of the machine running : ! Delivery : immediately available, FCA Metzingen Payment : 100 % Net, after conclusion of contract, before loading

Condition: used, Year of construction: 2010, Overview  This rotary cold-glue labelling machine was manufactured in 2010 by the Spanish company Auxiemba. The model BASIC 600-10-CF-I-DR is designed for applying paper or polypropylene labels onto cylindrical glass bottles using cold-glue technology. It is equipped with formats for 330 ml, 500 ml, and 750 ml bottles, making it suitable for wineries, breweries, and beverage producers. The machine is being sold due to the closure of a production line and is available in very good working condition. Technical data  - Capacity: up to 10,000 bottles/hour - Bottle formats: 330 ml, 500 ml, 750 ml - Bottle height range: 50–360 mm - Bottle diameter range: 40–160 mm - Label length range: 30–140 mm - Rotation direction: Clockwise - Number of bottle plates: 10 - Number of labelling stations: 1 - Air consumption: 125 L/min - Power consumption: 17.3 kVA, 400 V - Working height: 1,100 ± 50 mm - Construction: Stainless steel frame, enclosed safety housing - Control system: Micro PLC with touch-screen for speed, production, and fault management - Key features: - Cold-glue labelling head with oil-bath lubricated mechanisms - Central carousel with centering bases for precise bottle positioning - Pneumatic heated pump for adhesive circulation and return system - Automatic bottle synchronization with infeed screw to prevent breakages - Micrometric glue adjustment to reduce film thickness and ensure clean labelling - Bottle retainers for smooth handling and reduced congestion - Gear-driven transmission with clutch and emergency stop system - Compact, fully enclosed design for hygiene and safety Nledpfxsxl Di Dj Afwsf  

Condition: good (used), mileage: 1 km, power: 265 kW (360.30 HP), first registration: 06/2021, fuel type: diesel, tire size: 315/80R22,5, axle configuration: 8x4, wheelbase: 5,000 mm, fuel: diesel, color: white, driver cabin: day cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: steel, number of seats: 2, total length: 8,980 mm, total width: 2,550 mm, total height: 3,400 mm, Year of construction: 2021, Equipment: ABS, Bluetooth, air conditioning, central locking, cruise control, electric window regulation, parking heater, power mirror, seat heater, traction control, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Short cab - LED lamp - Manual - Auxiliary drive - Pump - Radio/cassette - Reversing camera - Lane departure warning system - Fabric - Central lubrication Number of axles: 4, Configuration: 8x4, Payload: 20889 kg, Tare weight: 14111 kg, Gross vehicle weight: 35000 kg, Total tank capacity: 300 liters, Fifth wheel coupling: Fixed, Number of differentials: 2, Central lubrication, Suspension type: Air suspension, Cab type: Short cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, Color: White, Heated mirrors, Reversing camera, Lighting type: LED lamp, Lane departure warning system, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 265 kW (355 Hp), Fuel: Diesel, Euro: 6, Transmission type: AS-Tronic, Transmission type: ZF, Gears: 12, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Starter battery, Pump, Central locking, Seats: 2, Seat arrangement: 1+1, Seat upholstery: Fabric, Seat adjustment: Manual Transmission Nlsdpfjyxv N Ejx Afwsf Transmission: ZF, 12 gears, Automatic Axle configuration Tire size: 315/80R22.5 Suspension: Leaf suspension Axle 1: Steered; Tire tread depth left: 1 mm; Tire tread depth right: 4 mm; Brakes: Disc brakes Axle 2: Steered; Tire tread depth left: 10 mm; Tire tread depth right: 1 mm; Brakes: Disc brakes Axle 3: Double tires; Tire tread depth left inner: 18 mm; Tire tread depth left outer: 18 mm; Tire tread depth right inner: 7 mm; Tire tread depth right outer: 6 mm; Brakes: Drum brakes Axle 4: Double tires; Tire tread depth left inner: 2 mm; Tire tread depth left outer: 5 mm; Tire tread depth right inner: 15 mm; Tire tread depth right outer: 14 mm; Brakes: Drum brakes Weights Tare weight: 14,111 kg Payload: 20,889 kg GVW: 35,000 kg Functional Pump: Yes Condition Technical condition: good Optical condition: good Damage: none Number of keys: 1 Financial Information Leasing price: €1,172 per month (default, 72 months); Inquire about further information and conditions Identification License plate: 26-BRS-1 Kleyn Trucks is one of the world's largest independent used vehicle dealerships. Here, you can choose from a constantly changing stock of 1200 used trucks, tractor units, and trailers. Our range includes all European brands from various years and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing inventory • Recognizable quality • A good price • Proper business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration is quickly arranged • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit an inquiry via our website. Ask...

Condition: used, mileage: 219,041 km, power: 324 kW (440.52 HP), first registration: 02/2015, fuel type: diesel, tire size: 385/65R22,5, axle configuration: 8x2, wheelbase: 3,850 mm, fuel: diesel, color: red, gearing type: automatic, emission class: euro6, suspension: steel-air, Year of construction: 2015, Equipment: air conditioning, crane, electric window regulation, trailer coupling, Technical information Number of cylinders: 6 Engine capacity: 10.837 cc Drivetrain Drive: Wheel Make of engine: DAF Axle configuration Axle 1: Tyre size: 385/65R22,5; Suspension: leaf suspension Axle 2: Tyre size: 385/65R22,5; Steering; Suspension: air suspension Axle 3: Tyre size: 295/80R22,5; Double wheels; Suspension: air suspension Axle 4: Tyre size: 295/80R22,5; Double wheels; Steering; Suspension: air suspension Njdpfx Aezd Aa Esfwslf Weights Empty weight: 17.425 kg Carrying capacity: 18.075 kg GVW: 35.500 kg Functional Mast: telescopic (3 parts) Make of bodywork: PALFINGER EPSILON Q180 Z95 TR = Additional options and accessories = - Central lubrication - PTO - Tipper hydraulics

Condition: used, mileage: 535,000 km, power: 240 kW (326.31 HP), fuel type: diesel, axle configuration: 4x2, wheelbase: 5,500 mm, fuel: diesel, brakes: engine braking, color: white, driver cabin: day cab, gearing type: automatic, emission class: euro6, suspension: steel-air, total length: 9,500 mm, total width: 2,540 mm, permissible axle load (axle 1): 7,500 kg, permissible axle load (axle 2): 11,500 kg, loading space length: 7,550 mm, loading space width: 2,460 mm, loading space height: 2,550 mm, Year of construction: 2016, Equipment: ABS, air conditioning, central locking, cruise control, electric window regulation, power mirror, spoiler, tail-lift, traction control, General information Year of manufacture: 2016 Registration number: 41-BHR-6 Technical information Number of cylinders: 6 Engine capacity: 7.698 cc Front axle: Max. axle load: 7500 kg; Tyre profile left: 70%; Tyre profile right: 70% Rear axle: Double wheels; Max. axle load: 11500 kg; Tyre profile left inner: 90%; Tyre profile left outer: 90%; Tyre profile right outer: 90%; Tyre profile right outer: 90% Weights Nlsdpfszicp Rox Afwof Empty weight: 9.235 kg Carrying capacity: 9.765 kg GVW: 19.000 kg Functional Tail lift: Dhollandia, tail lift, 2000 kg Financial information Price: On request = Additional options and accessories = - Aluminium fuel tank - Camera system - Central lubrication - Comfort seat with heating - Hardwood floor - Heavy duty engine brake - Radio/CD/USB - Rear air suspension - Reversing camera - Roof spoiler - Suspension seat - Toolbox 2x - Visor

Condition: good (used), axle configuration: 3 axles, first registration: 12/2016, suspension: air, tire size: 385/55R22,5, wheelbase: 9,090 mm, color: other, Year of construction: 2016, Equipment: ABS, tail-lift, = Additional options and accessories = - EBS - Tail lift - Central lubrication system = Notes = Number of axles: 3, Payload: 32150 kg, Tare weight: 9850 kg, Gross vehicle weight: 42000 kg, Chassis type: Full chassis, Kingpin size: 2 inch, Central lubrication system, Suspension type: Full air, ABS, EBS, Refrigeration unit model: Vector 1950 city, Refrigeration unit: Diesel/electric, Unit operating hours / electric: 1, Unit operating hours / Diesel: 6121, Body insulation, Type of cooling: Cooling, Additional evaporator, Axle type: SCHMITZ, Tail lift, Tail lift design: Rear door, Tail lift load capacity: 3000 kg, Tail lift manufacturer: Zepro, Tail lift material: Steel, Tail lift size: 200 x 254, Battery for ramp, STEERAXLE // TAILLIFT // LIFT AXLE // CARRIER VECTOR 1950 CITY = Additional information = General information Cab: Day cab Registration number: OP-33-KY Powertrain Fuel type: Diesel Transmission Gearbox: Manual gearbox Axle configuration Tire size: 385/55R22,5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Tire tread depth left: 6 mm; Tire tread depth right: 11 mm Axle 2: Tire tread depth left: 8 mm; Tire tread depth right: 9 mm Axle 3: Steerable; Tire tread depth left: 12 mm; Tire tread depth right: 11 mm Weights Unladen weight: 9,850 kg Payload: 32,150 kg GVW: 42,000 kg Functional Tail lift: Zepro, Rear door, 3000 kg Refrigeration unit: Diesel and electric (6121 operating hours diesel; 1 electric) Environmental Emission class: Euro 0 Condition Technical condition: good Optical condition: good Damage: none = Company information = Nljdpjzg T Tnofx Afwof Kleyn Trucks is one of the largest independent used vehicle dealerships in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from various years of manufacture and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Assistance with import and transport • (Export) registration can be arranged quickly • Expert technical services • The security of "recognizable quality" • And more.... Please visit our website for special offers and a complete inventory: Leasing through Kleyn Trucks is possible in most European countries! Quickly calculate your leasing rate and submit a request through our website. Ask directly about our European warranty package.

Condition: ready for operation (used), Year of construction: 2008, machine/vehicle number: 100.06238, functionality: fully functional, hydraulic forging hammer (H2) Manufacturer: LASCO Nlsdpfxjziw Nle Afwof Type: HO - U 630 SO Year of manufacture: 2008 Impact energy: 63 kJ Impact frequency: approx. 85/min Ram speed: up to 5 m/s Ram stroke: 520 to 760 mm Ram depth: 750 mm Ram weight: 4,300 kg Central lubrication with hydraulic oil Filter circuit with cooling

Condition: excellent (used), Year of construction: 2005, Arburg 320K 700-250 with the side robot Arburg Multilift H Year of manufacture: 2005 injection unit: Screw diameter: 40 mm injection weight: 158 g injection pressure: 1390 bar Metering volume: 188 ccm Clamping unit : clamping force: 70 t tie bar distance: 320x320 mm size of clamping platens: 476x476 mm ejector: hydraulic clamping unit: toggle lever Control system: SELOGICA Additional equipment: Air valve x 3 Control with hot runners injection unit hardened - bimetal Central lubrication Nledpfxozc Nnue Afwef Dimensions: Weight: 2350 kg length/width/height: 3.37x1.45x1.99 m Drive: Pumps/motor: 15 kW Heating power: 6,1 kW Total power: 21,1 kW All offered machines are started by our service technicians before sale. It is possible to get a video of technical tests of the selected machine or participate in live technical tests in our company in Łódź. Price: Upon request

Condition: excellent (used), Year of construction: 2017, Wittmann Battenfeld EcoPower 110/350 with the Wittmann W818 robot / Electric machine / Operating hours: approx. 16,000 in automatic mode Year of manufacture: 2017 Injection unit: Screw diameter: 35 mm Injection weight: 153.8 g Injection pressure: 2083 bar Dosing volume: 169 cc Clamping unit: Clamping force: 110 t Bar spacing: 470x420 mm Size of the clamping plates: 680x660 mm Ejector: electric Clamping unit: toggle lever Control: UNILOG B8 - touchscreen Additional equipment: Perfect technical condition Electric machine: high-speed, energy-saving and very quiet Operating hours: approx. 16,000 in automatic mode Euromap 67 Robot interface Control with Air valve Hydraulic core pull x 1 Control with hot runners Injection unit is wear-resistant and resistant to corrosion Central lubrication Automatic tool height adjustment Parallel movements The machine was serviced in Germany Robot Wittmann W818 Year of manufacture: 2015 4-axis robot: 3 axes are driven by servo motors (electric); axis C - pneumatic Travel paths in axes: X-420, Y-1200, Z-2000 Touch control panel The safety package for robots Robot with adapter, conveyor belt and protective housing Njdpfx Aszc Nuusfwelf Purchase of the robot and the conveyor belt for an additional charge Dimensions: Weight: 4800 kg Length/width/height: 4.91x1.42x2.10 m All machines offered are started by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to take part in live technical tests in our company in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2009, Arburg 520H 1500-400 e² / Hybrid Machine Year of manufacture: 2011 Injection unit: Screw diameter: 40 mm Shot weight: 184 g Injection pressure: 2,000 bar Dosage volume: 201 ccm Clamping unit: Clamping force: 150 t Tie bar spacing: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Nledpezc N R Nefx Afwof Control: SELOGICA - Touchscreen Additional equipment: Hybrid machine: energy-efficient and very quiet Euromap 67 Robot interface Core pull control Control with 8 hot runner zones Injection unit hardened - bimetallic Main machine motor - servomotor driven by inverter - energy saving Injection unit driven by servomotor, control via inverter Machine equipped with cylinder/battery with compressed nitrogen (additional charge for fast operation) Central lubrication Parallel movements Priamus sensor - tool pressure regulation Dimensions: Weight: 6,010 kg Length/Width/Height: 4.67x1.56x2.21 m All offered machines are started by our service technicians prior to sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: excellent (used), Year of construction: 2012, Arburg 520H 1500-800 e² / Hybrid Machine / Production Line with Side Robot Arburg Multilift H Year of manufacture: 04.2012 Injection Unit: Screw diameter: 55 mm Shot weight: 434 g Injection pressure: 1650 bar Dosage volume: 474 ccm Clamping Unit: Clamping force: 150 t Tie bar distance: 520x520 mm Platen size: 695x695 mm Ejector: electric Clamping unit: toggle lever Control system: SELOGICA - Touchscreen Additional Equipment: Hybrid machine: high-speed, energy-saving, and very quiet Control system with air valve Core pull control Hot runner control x 12 Injection unit hardened - bimetallic Main drive motor - servo motor with inverter - energy saving Injection unit driven by servomotor controlled by inverter Machine equipped with cylinder / battery with compressed nitrogen (additional charge for fast operation) Central lubrication Automatic mold height adjustment Kistler sensor - mold pressure regulation The injection molding machine was operated in a so-called "cleanroom," and is fitted with extra protective devices against contamination and two vapor absorbers Side robot Arburg Multilift H Year of manufacture: 2012 5-axis robot: Z-axis driven by servo motor (electric); X, Y, and B axes (rotation) pneumatically operated Njdpfx Afozc N Syowslf Robot safety package Robot with adapter, conveyor belt with electric height adjustment, safety enclosure Purchase of robot and conveyor belt at extra cost Dimensions: Weight: 6,820 kg Length/Width/Height: 5.03x1.56x2.21 m All offered machines are started up by our service technicians before sale. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our facility in Łódź. Price: On request

Condition: ready for operation (used), Year of construction: 2015, operating hours: 9,000 h, travel distance X-axis: 610 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 610 mm, controller manufacturer: HURCO, controller model: WinMax / MAX5, table width: 508 mm, table length: 760 mm, table load: 1,500 kg, spindle speed (max.): 12,000 rpm, spindle motor power: 9,000 W, number of slots in tool magazine: 30, number of axes: 3, This 3-axis Hurco VMX 24i was manufactured in 2015. It features an X-axis travel of 610 mm, Y-axis travel of 508 mm, and Z-axis travel of 610 mm. The machine includes a robust table size of 760 x 508 mm and a maximum table load of 1,500 kg. If you are looking to get high-quality machining capabilities, consider the Hurco VMX 24i vertical machining centre we have for sale. Contact us for further details. Nsdpfxjzc Rzie Afwelf - Tool Holder: SK40 / CAT40- Max. Torque: 95 Nm- Max. Tool Diameter: 80 mm- Max. Tool Length: 300 mm- Max. Tool Weight: 7 kg- Rapid Traverse X/Y: 38 m/min- Rapid Traverse Z: 32 m/min- Additional Equipment: Automatic centralized lubrication, Chip flushing system, Scraper belt conveyor, Coolant unit, Electronic handwheel, Network connection- Included in Delivery: CNC milling machine Hurco VMX 24i- Excluded Items: Vise, tools, clamping devices, other accessories

Condition: new, maximum load weight: 45,115 kg, overall weight: 53,000 kg, axle configuration: 3 axles, Equipment: ABS, More vehicles can be found at [website address]. Excerpt from the equipment list. Complete equipment list available upon request. Nledezhd Nijpfx Afwjf Loading area: Loading area with approximately 30 mm thick hardwood flooring. 8 pairs of lashing rings that can be folded outwards (LC 10,000 daN). Kingpin: JOST kingpins (mechanical) with a 2-speed gearbox for an approximate lifting capacity of 24 tons (approx. 50 tons test load). Tires: 385/65 R 22.5. TPMS tire pressure monitoring system according to ECE R 141. Data transmission to the tractor unit is via the standardized EBS interface according to ISO 11992. For correct display, the tractor unit must be able to transmit and display this data. Axles and suspension: BPW axles, technically rated at 10,000 kg each. 1st and 3rd axles are hydro-mechanically forced-steered and mounted on a turntable. 2nd axle is fixed. Air-suspended with lifting and lowering valve. Axle spanner. Braking system: Wabco braking system in accordance with EU regulations with EBS-E (4S3M) without connecting lines to the tractor unit. Electrical system: Electrical system in accordance with EU regulations, lighting 24 Volt ASPÖCK-NORDIK (ASS3). ASPÖCK-UNIBOX on the front connection bar with 24N, 24S & 15-pin sockets according to ISO. 24N ISO-1185 24S ISO-3731 15-pin ISO-12098. Steel structure: Steel structure made of high-strength fine-grain steels. Steel grades: S355J2+N/S355MC (yield strength 355MPa) S690QL/S700MC (yield strength 690MPa). Painting: Complete steel structure automatically blasted with a shot blasting system after welding. Second blasting with corundum for optimal adhesion of the coating system. Final coating with 2 layers of 2K topcoat, solid color in RAL 3002 Carmine Red according to the RAL 841GL system. Rear part is metallic and painted in RAL 9010 (pure white). Rims in silver. Coating tested in a salt spray test according to ISO 9227-NSS. Sealing of cavities with special wax. Accessories: Loading area with approximately 30 mm thick hardwood flooring. 2-inch kingpin. One galvanized steel front panel (EN12642-XL), approximately 1,200 mm high. Yellow-red air couplings on the galvanized front connection bar. 4 pieces of wheel chocks with holders on the front panel. Storage for approximately 1,000 mm lashing bars in the rear central beam. On the gooseneck and rear panel, one holder each on the left and right sides for warning signs including a socket. Yellow reflector tape according to EU regulations on the side and rear of the trailer. 10 pairs of lashing bar pockets for lashing bars approximately 100 x 50 mm in the outer frame of the loading area. European reflector signs (red-yellow) on the rear of the trailer. One holder for a rotating beacon on the rear of the trailer. One mud flap on the rear of the trailer. Manual and description on a USB stick. Speed stickers 80 km/h on the rear and both sides. Electro-hydraulic unit. 1 maneuvering coupling with reinforcement bolted to the end cross member. Load manometer for determining the axle loads including a load diagram. Central lubrication system BEKAMAX (Pico) with standard grease NLGI-2 and a removable guard around the pump. Follow-up steering from the front and rear using a cable remote control via push buttons, with single-axle steering control (without installation in the tractor unit). 7 pairs of galvanized lashing bars approximately 100 x 50 mm, approximately 1,000 mm high. 4 pairs of lashing bar strip rails, mounted transversely in the loading area, for las

Condition: used, mileage: 300,635 km, power: 162 kW (220.26 HP), first registration: 10/2015, tire size: 285/70r19.5, axle configuration: 4x2, wheelbase: 6,400 mm, brakes: engine braking, color: other, driver cabin: day cab, gearing type: automatic, suspension: steel-air, total length: 10,900 mm, total width: 2,550 mm, total height: 3,550 mm, Year of construction: 2015, Equipment: central locking, cruise control, electric window regulation, power mirror, soot filter, tail-lift, = Additional options and equipment = - CD player - Particle filter - Reversing camera - Headlights Nljdpfozgmulsx Afwef - Sun visor - Toolbox - Central lubrication = Further information = Tyre size: 285/70R19.5 Brakes: Disc brakes Front axle: Steered; Tyre tread left: 4 mm; Tyre tread right: 4 mm; Suspension: Leaf spring Rear axle: Twin tyres; Tyre tread inner left: 10 mm; Tyre tread outer left: 10 mm; Tyre tread inner right: 8 mm; Tyre tread outer right: 8 mm; Suspension: Air suspension Unladen weight: 7,685 kg Payload: 5,815 kg Gross vehicle weight: 13,500 kg Damages: none

Condition: used, mileage: 222,675 km, power: 390 kW (530.25 HP), axle configuration: 4x2, color: blue, driver cabin: sleeper cab, gearing type: automatic, Year of construction: 2022, Equipment: ABS, EBS, air conditioning, - Braking system For inquiries regarding the vehicle, please contact Mr. Seidel (at tel. number...). Mercedes-Benz Actros 1853 (2153) LS 4x2 semi-trailer tractor unit Nodszlbamspfx Afwolf !!! 2-circuit tilting hydraulic system !!!, A0A Two-way sensors, on the rear axle, A0B Axle, wheel mounting gauge, narrow, A1D Front axle 8.0 t, A1Y Front axle, straight design, A2E Rear axle, crown wheel 440, hypoid, 13.0 t, A3D Rear axle with active lubrication, unthrottled, A5C Axle ratio i = 2.733, B1B Electronic braking system with ABS and ASR, B1F Heater, electronic compressed air supply unit, B1H Electronic compressed air supply and control, medium, B2A Disc brake, on front and rear axles, B2X Parking brake, electronic, B3K Secondary oil retarder, B4L Compressed air tank, aluminum, complete, C0G Frame overhang 1050 mm, C1W Wheelbase 3700 mm, C8Z Side panel, aerodynamic, D0A Leather steering wheel, D0L Smoker's package, D0S Compressed air connection, in the cab, D1C Driver's suspension seat, comfort, D1N Co-driver's functional seat, D3B Comfort bed, lower, D3M Mattress, PremiumComfort, lower, D3Q Seat cover, velour, D4S Sun visor, 1-piece, electric, windshield, D4T Curtain, transverse in front of the bed(s), D4Z Sun visor, side, driver and co-driver side, D6C Electric auxiliary air conditioning, D6G Automatic climate control, D6I Waste heat utilization, D6M Hot water auxiliary heater, cab, D7A Additional thermal insulation, D7J Drawers, under bed, D7R Storage flaps, above windshield, D8N Lift roof, electric, D9A Pre-installation comfort bed, upper, wide, E6Z Reversing warning system, E7F Cable remote control for air suspension, E9G Pre-installation for electrical equipment, E9I Pre-installation switch, lift axle, semi-trailer/trailer, F0F Side module, N3 vehicle, F0J L-cab BigSpace, 2.50 m, tunnel 120 mm, F3C Cab mounting, comfort, air-sprung, F5L Sun visor, exterior, transparent, F5P Air deflector, lockable, ECE/adjustable range extended, F6C Windshield tinted, F6I Front mirror, heated, F6L Main mirror, with reversing position, co-driver side, F6Q Air horn, F8E Locking system, with central locking, F8F Comfort locking system, F8V Light sensor, F8W Rain sensor, G0K Driving program economy/power, G0T Predictive Powertrain Control, G2E Transmission G 281-12/14.93-1.0, G5A Single-plate clutch, G5G Mercedes PowerShift 3, H2C Saddle coupling distance +600 mm, I2H Tires tubeless, 315/80 R 22.5 rear axle, I2P Tires tubeless, 385/65 R 22.5 front axle/front lift axle/rear lift axle, I4A Wheel formula 4x2, I6I Vehicle production plant Wörth, I6X Air suspension, rear axle, J1O Tachograph digital, 2nd generation, ADR, J1S Tachograph manufacturer VDO, J2G Digital radio, J2J Sound system, J2U Navigation system, J2Y CB radio, 24 V, J3U Requirement Fleetboard Manager App, J3V Truck Data Center 7, J3Z Axle load measuring device, J6B Multimedia cockpit, J6Y Remote Online, J6Z Pre-installation Mercedes-Benz Truck App Portal, J8Y Pre-installation for Truck Data Center 7, J9D Pre-installation for toll collection, K0T Main tank, left, K1R Tank 720l+75l AdBlue, left, 650x700x2170 Aluminum, ladder, K5M Tanks, lockable, K5S Protective cap for AdBlue dosing system, K8D Exhaust system, tailpipe to the right outside, horizontal, L0A Lighting regulation, according to UN-R 48.06, L1B Daytime running lights, L1D Automatic high beam/low beam and turning lights, L1H Fog lights, halogen, L2H Side marker lights, flashing, L3F 1 LED work light, lower, center, L9A Pre-installation for rotating beacon,

Condition: as good as new (ex-display), Year of construction: 2026, Optiturn L34 HS CNC lathe directly from the manufacturer. L34 HS - The OPTIMUM CNC lathe with Siemens control SINUMERIK 808D Advanced PPU 150. Strutted machine bed made of gray cast iron - Elaborate spindle bearings - Emergency stop switch - Central lubrication - Spindle and feed motors from Siemens - Maintenance-friendly protective housing - Rear access flap for maintenance - Safety switch on the front sliding door - Turning turret is located behind the turning center (left turning tool) Nljdpfx Aozi Evgefwef - Linear guide - Software package "SINUMERIK 808D on PC" included. (Practical training software, so that workpieces can be programmed and simulated offline on the PC. Free to download Technical data Electrical connection 400 V / 3 Ph ~50 Hz Total connected load 6.5 kVA Spindle Drive motor S1 operation 3.7 kW Torque drive motor S1 operation 23.6 Nm Torque at the spindle 40 Nm Spindle holder DIN 6350 A2-3 Spindle bore Ø 46 mm Coolant system Coolant pump output 95 W Tank capacity 75 liters Machine data Center height 165 mm Center width 600 mm Rotation Ø over cross slide Ø 146 mm Rotation Ø over machine bed Ø 350 mm Speed range Yvwdh0 Spindle speeds* 30 - 3500 min-1 Tool turret Type electric Number of tool positions 6 tools Mounting height, width square max. 16 mm Mounting diameter of boring bar max. 16 mm Accuracy Repeat accuracy ± 0.01 mm Positioning accuracy ± 0.01 mm Travel distance X-axis 145 mm Z-axis 465 mm Feed speed X-axis 6,000 mm/min. Z-axis 8,000 mm/min. Machine leasing possible via Siemens Finance. Liquidity required.

Condition: ready for operation (used), Year of construction: 2012, stroke length: 250 mm, Mechanical stamping press manufactured in 2012. This Colombo Agostino T231A315 features a nominal press capacity of 315 tons and a slide stroke of 250 mm. It includes a motorized slide adjustment of 315 mm and a bed dimension of 1120 mm x 960 mm. If you are looking to get high-quality stamping capabilities, consider the Colombo Agostino T231A315 machine we have for sale. Contact us for further details. • Main motor power: 32 kW • Stroke speed (min - max): 15 - 30 strokes/min • Slide stroke (working travel): 250 mm • Slide (ram) adjustment: 315 mm (motorized) • Shut height (max. closed die height): 650 mm • Shut height (min. closed die height): 335 mm (max. shut height minus slide adjustment) • Bed (bolster plate) dimensions: 1120 mm x 960 mm • Slide (ram) face dimensions: 1120 mm x 960 mm • Bottom cushion stroke (max): 160 mm (integrated) • Slide guidance: Precision guided ram system Nsdpfx Aezcywaefwslf • Bed configuration: Fully machined bolster plate • Lubrication: Centralized automatic lubrication system Additional equipment • Feeding system: Coil/feeding line included • Optional equipment: Not included Technical Specification Stamping Force 3150 Kn

Condition: excellent (used), mileage: 103,000 km, power: 184 kW (250.17 HP), first registration: 01/2003, fuel type: diesel, axle configuration: 6x2, fuel: diesel, brakes: engine braking, color: red, gearing type: automatic, emission class: euro3, suspension: steel-air, total length: 10,000 mm, total width: 2,350 mm, total height: 3,300 mm, permissible axle load (axle 1): 5,600 kg, permissible axle load (axle 2): 9,800 kg, permissible axle load (axle 3): 5,600 kg, Year of construction: 2003, Equipment: ABS, EBS, central locking, differential lock, electric window regulation, power assisted steering, power mirror, = Additional Options and Accessories = - Brake booster - Differential lock - Air suspension - Air horn - Radio/cassette player - Rotating beacon - Disc brakes - Sun visor - Stability control - Toolbox - Power take-off (PTO) - Central lubrication system = Notes = Metz 30 meter Generator 6 kVA, 4138 operating hours = Additional Information = Nledpfszbuuqox Afwof Axle configuration Front axle: Max. axle load: 5600 kg; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Leaf spring suspension Rear axle 1: Twin tires; Max. axle load: 9800 kg; Tire tread depth left inner: 80%; Tire tread depth left outer: 80%; Tire tread depth right inner: 80%; Tire tread depth right outer: 80%; Suspension: Air suspension Rear axle 2: Max. axle load: 5600 kg; Steerable; Tire tread depth left: 80%; Tire tread depth right: 80%; Suspension: Air suspension Weights Unladen weight: 14,820 kg Payload: 6,180 kg GVWR: 21,000 kg Functional Mast length: 30 m CE marking: yes Condition Technical condition: very good Optical condition: very good Further Information Please contact Andre, Henri, or Andre for further information.

Condition: good (used), mileage: 771,484 km, power: 360 kW (489.46 HP), first registration: 04/2016, fuel type: diesel, tire size: 315/60R22,5, axle configuration: 8x2, wheelbase: 5,320 mm, fuel: diesel, brakes: retarder, color: white, driver cabin: sleeper cab, gearing type: automatic, number of gears: 12, emission class: euro6, suspension: air, total length: 10,150 mm, total width: 2,550 mm, total height: 3,680 mm, loading space length: 6,200 mm, loading space width: 2,480 mm, Year of construction: 2016, Equipment: ABS, Bluetooth, air conditioning, central locking, crane, cruise control, electric window regulation, navigation system, parking air conditioner, parking heater, power mirror, retarder, seat heater, traction control, trailer coupling, - Heated mirrors - Digital tachograph - Trip recorder (control unit) - Fixed - Halogen lamp - Manual - Auxiliary drive - Pump - Radio/cassette - Sleeper cab - Lane keeping assist Nljdezbhh Depfx Afwjf - Fabric - Central lubrication - Auxiliary braking system Number of axles: 4, Configuration: 8x2, Tare weight: 21850 kg, Gross vehicle weight: 35000 kg, Total tank capacity: 500 liters, Trailer coupling, Axle pin diameter: 40 DIN, Fifth wheel coupling: Fixed, Number of locks: 1, Central lubrication, Suspension type: Full air, Type of cab: Sleeper cab, Cruise control, Trip recorder (control unit), Digital tachograph, Air conditioning, Stationary air conditioning, Auxiliary heater, Electric windows, Electric mirrors, Radio/cassette, GPS navigation, Color: White, Heated mirrors, Lighting type: Halogen lamp, Lane keeping assist, Climate control, Seat heating, Bluetooth, Flashing lights, Engine power: 360 kW (483 Hp), Fuel: Diesel, Euro: 6, Transmission type: Opti-cruise, Transmission type: Scania, Gears: 12, Auxiliary braking system, Retarder brand: Scania, Power steering, ABS, ASR, Auxiliary drive, PTO type: 1, Starter battery, Rotation direction: 1x20, Pump, Central locking, Seat arrangement: 1+1, Seat cover: Fabric, Seat adjustment: Manual, Crane, Crane manufacturer: HMF 6020-OK6, Crane year of construction: 2015, Crane lifting capacity: 60000, Maximum load: 2640 kg at 16.9 m, Number of support legs: 4, CE certified, Crane manual, Control position: upper control, Crane position: behind the cab, extendable: 6, Hydr. auxiliary connection: none, Load hook Transmission Transmission: SCA, 12 gears, Automatic Axle configuration Tire size: 315/60R22.5 Brakes: Disc brakes Suspension: Air suspension Axle 1: Steered; Tire tread depth left: 7 mm; Tire tread depth right: 10 mm Axle 2: Steered; Tire tread depth left: 8 mm; Tire tread depth right: 8 mm Axle 3: Double tires; Tire tread depth left inner: 5 mm; Tire tread depth left outer: 6 mm; Tire tread depth right inner: 15 mm; Tire tread depth right outer: 15 mm Axle 4: Lift axle; Steered; Tire tread depth left: 4 mm; Tire tread depth right: 8 mm Weights Unladen weight: 21,850 kg Payload: 13,150 kg GVW: 35,000 kg Functional Crane: HMF 6020-OK6, Year of construction 2015, behind the cab Loading platform height: 105 cm Pump: Yes Condition Technical condition: good Optical condition: good Damages: none Number of keys: 1 Identification Registration number: KLEYN1 Kleyn Trucks is one of the largest independent used vehicle dealers in the world. Here you can choose from a constantly changing stock of 1200 used trucks, tractors, and trailers. Our range includes all European brands from different years of construction and price ranges. Why buy from Kleyn Trucks? Simple! • Large, rapidly changing stock • Recognizable quality • Good price • Correct business practices • We speak many languages • We understand our customers • Support for import and transport • (Export) license plates are quickly arranged • Expert technical services • The security of "recognizable quality" • And more... Please visit our website for special offers and a complete inventory: Leasing...

Condition: good (used), travel distance X-axis: 2,500 mm, travel distance Y-axis: 1,000 mm, travel distance Z-axis: 1,600 mm, Manufacturer: SORALUCE Type: TL-25 Control: HeidenHain TNC 430 Year of manufacture: 1998 Aiptek ATC 30 positions Automatic head 2.5 x 2.5 Gr Central lubrication Machine housing with front doors Large tool package Specifications Metric US Standard X-axis 2500 mm Y-axis 1000 mm Z-axis 1600 mm Table length 2860 mm Table width 1000 mm Table load 7500 Spindle power 25 kW Nlodpjv Idaljfx Afwef Spindle speed 0 - 3000 rpm Tool holder 50 ISO/Bt/Mk X-axis feed 10000 mm/min. Y-axis feed 10000 mm/min. Z-axis feed 10000 mm/min. Milling head auto index 2.5 x 2.5° Working hours 12500 H Dimensions (estimate) Length 6000 mm Width 3500 mm Height 3500 mm Weight 15000 kg Please note: The information on this page is correct to the best of our knowledge and belief and, where possible, has been obtained from the manufacturer. The information is given in good faith but its accuracy cannot be guaranteed. Accordingly, it will not constitute a representation and terms of contract. We recommend that you check all important details.

Condition: new, Year of construction: 2024, Martin T 45 thickness planer with Tersa cutterblock Nlodpfx Ajqlckpofwef The T45 thicknessing machine offers ideal conditions for modern production: It delivers cleanly planed surfaces, is quick and easy to operate and works extremely quietly. and works extremely quietly. The standard electronic control system makes Thanks to 99 storable planing dimensions, setting the planing height is so easy that even the the first workpiece fits perfectly. Of course, the thicknessing table can also be moved at the simple press of a button, or can be incremented by 0.1 mm. upwards. The switching elements of the feed control are also within easy reach. reach. The heavy, vibration-damping composite stand with the high-quality the high-quality bearing-mounted planing shaft guarantees excellent surfaces. Thanks to the sound-insulating construction, you can work quietly even in the standard version. - Planing width: 630 mm - Weight: approx. 1,200 - 1,400 kg - Planing height: 2.8 - 300 mm - Table length: 1,260 mm - Workpiece length min.: 270 mm - Speed: 5,000 rpm - Operation: 1-axis control for planing dimension, max. 99 values can be stored, 49 of which can be used for a freely programmable planing sequence; button for manual quick and fine adjustment of planing thickness according to digital display, push button for cutterblock start and stop, integrated operating hours counter - Cutterblock: TERSA solid steel cutterblock Z4 Ø 125 mm; incl. blocking for easy cutter change - Thicknessing table: Electric thicknessing table adjustment with fine adjustment, travel speed 10 mm/s, mounted on 4 support spindles to prevent tilting, finely planed table surface - Feed: 2 speeds 6 / 12 m/min, can also be selected electrically during planing, large rubber feed rollers Ø 85 mm to compensate for different thicknesses of wood, rubber rollers are gentle on the material and self-cleaning, easy roller change; link pressure beam at infeed - Suction system: Swivel-up, split hood with chip extraction nozzle Ø 160 mm, can be connected optionally on the left / right (in special cases on both sides); minimum extraction air volume: 27 m³/min. at 20 m/s - Maintenance device: Central lubrication strip for oil lubrication points; bearing / cutter shaft lubrication via nipple - Accessories: 1 grease gun, filled with long-life grease 1 oil gun 1 open-end wrench 1 tool for blade change 1 pair of blind knives 640 mm 2 pairs of TERSA reversible knives 640 mm CV - Emission values: Emission sound pressure level at the workplace LpA according to DIN EN ISO 11202 [dB(A)] Idle noise (without extraction) P1 65 Idle noise (w. extraction) P1 77 Operating noise (without extraction) P2 65 Operating noise (with extraction) P2 78 Sound power level LWA according to DIN EN ISO 3746 [dB(A)] Idle noise (without extraction) 84 Operating noise (with extraction) 90 Dust emission Low dust emission according to DGUV 209-044 / BGI 739-1 Location: ex stock 54634 Bitburg - immediately available -

Condition: good (used), Year of construction: 1992, Table surface area: 1850 x 710 mm Permissible table load: 3000 kg Travel ranges: Longitudinal, automatic (X): 1600 mm Lateral, automatic (Y): 710 mm Vertical, automatic (Z): 850 mm Spindle mounting: SK 50 Speed range: 20 - 2500 RPM Main motor power, AC: 15 kW Transport dimensions L x W x H: 3650 x 2300 x 2700 mm Weight: 9400 kg Nodpfx Aettamkefwslf Accessories / Special features: • CNC path control system, manufacturer HEIDENHAIN, model TNC 360 with 3 scales • Programming language "Plain text dialog" and DIN-ISO • Electronic handwheel HEIDENHAIN HR 330 with magnetic holder • 3D probing system HEIDENHAIN TS 120 • Main spindle compact unit RAC 3 • Control system prepared for 4th axis • Universal milling head system "HURON" with 2 levels, gears run in an oil bath • Hydraulic tool clamping • Coolant system • Central lubrication with interval • German electrical system, drives INDRAMAT • Operator control panel • Operating manual - Newly refurbished milling head, partially overhauled with new gears, seals and bearings - Oil dispenser for central lubrication renewed Operating hours: 10,032 Program runs: 3,288 Spindle ON: 2,569 Siegfried Volz Werkzeugmaschinen Rüschebrinkstr. 151-153 DE – 44143 Dortmund - Wambel / Germany

Condition: reconditioned (used), Year of construction: 1981, machine/vehicle number: 116680, functionality: fully functional, Rated power: 380 V, 11 A Planing width: 630 mm Planing height: 250 mm Feed rate: 8-20 m/min Dust extraction port: 160 mm Weight: approx. 870 kg Rubber-coated infeed and outfeed rollers Two-knife cutterhead with strip planing knives Central lubrication Planing height adjustable via handwheel Nsdpfx Afeh U A Evewolf Star-delta switch

Condition: ready for operation (used), Year of construction: 2009, operating hours: 26,180 h, spindle speed (max.): 2,500 rpm, travel distance X-axis: 360 mm, travel distance Z-axis: 980 mm, spindle motor power: 33,000 W, total height: 2,090 mm, total width: 1,980 mm, overall weight: 7,500 kg, bar diameter (max.): 110 mm, controller manufacturer: SIEMENS, product length (max.): 3,250 mm, workpiece diameter (max.): 500 mm, number of slots in tool magazine: 12, number of axes: 3, This 3-axis SPINNER TC 800 110 MC was manufactured in 2009. It features a collet chuck for clamping and includes a dust extraction system. Optional equipment includes a bar feeder, parts catcher, turret with driven tool, chip conveyor, and tailstock. If you are looking to get high-quality turning capabilities, consider the SPINNER TC 800 110 MC horizontal turning machine we have for sale. Contact us for further details. • Live Tool Speed: 4,000 rpm • Live Tool Power (100%/40%): 5 / 9.6 kW Nodozlqycjpfx Afwelf • Rapid Traverse X/Z: 15 / 24 m/min • Maximum Turning Diameter: approx. 500 mm • Maximum Swing Diameter: approx. 800 mm • Distance Between Centers: 800 mm • Main Spindle Nose: A11 • Main Spindle Power (100%/40%): 22 / 33 kW • Main Spindle Torque (Gear 1, 100%/40%): 175 / 263 Nm • Main Spindle Torque (Gear 2, 100%/40%): 700 / 1050 Nm • Coolant Tank Capacity: approx. 235 l • Hydraulic Tank Capacity: approx. 11 l • Central Lubrication Tank: approx. 2–3 l • Machine Weight: approx. 7,000–7,500 kg • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A • Rated Current (IN): 80 A • Collet Chuck Used for Clamping • Supply Voltage: 3/PE ~ 400 V • Frequency: 50 / 60 Hz • Operating Current (IB): 63 A • Rated Current (IN): 80 A • Collet chuck used for clamping • Dust extraction system Optional equipment: • Bar feeder • Parts catcher • Turret with driven tools • Chip conveyor • Tailstock Technical Specification Counter Spindle No Driven Tools Yes Taper Size VDI 50