Used Center grinding machine for sale (86,314)

TECHNICA ZSM 5100-823

Call

Condition: used, Year of construction: 2009, workpiece diameter 6-150 mm clamping length 50-1100 mm workpiece weight max. 120 kg total power requirement 2 kW weight of the machine ca. 460 kg Only 291 operating hours! Equipment/accessories: -various grinding wheels -various clamping jaws -Suction Dmaxrr -Documentation -Disk

more

Listing

Leipzig

1,139 km

WMW Suhl SIX 160x1000L

Call

Condition: used, Year of construction: 1964, rotary table diameter: mm grinding height: mm grinding head - power requirement: kW shaft diameter: max. 120 mm work piece - max.: 800 mm height of profile: Tiefe: max. 90 mm grinding spindle speed: nicht bekannt U/min Table dimensions: Ø 150 mm voltage: 380 V total power requirement: 1,1 kW weight of the machine ca.: 0,675 t dimension machine xH: 0,75 x 0,70 x 2,0 m transport dimensions LxWxH: m Application: vertical internal cylindrical grinding of shafts face, and center grinding with shaft grinder. Spindle head technical details: -equipment shank grinder Ø 13mm 60°; clamping element Ø 6mm shank clamping head. -travel=vertical 950mm by handwheel and transversal 80mm by crank handle -abrasive device with diamond, adjustment crosswise= 80mm. Table other specifications: -with fixed tip holder 60°. -speed 63 / 125 rpm. -adjustment vertical 600mm, in height 1.100mm, operation manual. centering block: -prismatic guide Cdybfwcs2f accessories: -fixed tip L=180mm -fixed tip L=300mm -div. shank grinder -div. clamping and auxiliary tools

more

Listing

Malsch

1,078 km

WMW SIXZB 60-1000LQ

Call

Condition: used, workpiece diameter 60 mm grinding depth 30 mm clamping length 1000 mm total power requirement kW weight of the machine ca. 0,6 t dimensions of the machine ca. 0,5 x 0,5 x 2,1 m Hsqyatn

more

Listing

Dreieich

1,010 km

TECHNICA 5100-810

Call

Condition: used, workpiece diameter 150 mm grinding depth 5,0 mm workpiece length 1.100 mm grinding spindle speed 45.000 U/min voltage 380 V total power requirement 0,5 kW weight of the machine ca. 490 kg dimensions of the machine ca. 1,00 x 0,85 x 1,85 m suction device 0,40 x 0,75 x 0,60 m Bszvdyo8 - Serial-No.: J20720-89 - Machine ON: 3.680 h - Workpiece drive - Dressing device - Suction

more

Listing

Sennwald

1,275 km

Center grinding machine

Technica ZSM-150

Call

Condition: good (used), Center grinding machine according to the photos in good used condition. Technical specifications: Maximum length of the workpiece in the standard version 1100 mm Maximum length of the workpiece with an extended stand 1500 or 2500 mm Smallest length of the workpiece 50 mm Largest diameter of the workpiece in the standard version 125 mm Largest diameter of the workpiece for special versions 150 mm Smallest diameter of the workpiece with a normal vice 8 mm Center height of the rice stock above the guide (stand) 145 mm Workpiece length max.: 1100 mm Center height of the tailstock above the slide (vise) 65 mm Taper angle of the center hole 60° Largest center hole taper diameter 50 mm Smallest center hole core hole diameter for standard version 2 mm Smallest center hole core hole diameter for special versions 1 mm Grinding spindle speeds 45,000 / 22,500 / 13,000 1/min Hollow spindle speed 400 1/min Stroke of the grinding wheel along the grinding surface 0.75 – 5 mm Diameter of the grinding wheels 15, 27, 48 mm Power of the motor for grinding spindle drive 0.36 HP Motor power for hollow spindle drive and lifting movement 0.2 HP Weight of the machine 460 kg Bwu9o8v39s Dimensions W x D x H: approx. 750 x 850 x 1900 mm If you have any further questions, please just let us know. No guarantee is given for the correctness, completeness and topicality of the information. The sale takes place without any guarantee.

more

Listing

Metzingen

(dealership location)

1,153 km

HENNINGER ZS 150x2500

Call

Condition: used, Year of construction: 1983, workpiece diameter 110 mm Tefe28awj grinding depth 60 mm clamping length 2500 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m

more

Listing

Deitingen

1,188 km

Center grinding machine

Technica ZSM-150

Call

Condition: excellent (used), Year of construction: 1974, Workpiece diameter max.: 150 mm workpiece length max.: 1100 mm center hole angle : 60 ° grinding spindle speed : 15'000 rpm Weight: approx. 460 kg dimensions W x D x H: approx. 700 x 800 x 1800 mm Bptvet78z0 Accessories: see picture

more

Listing

Metzingen

(dealership location)

1,153 km

TECHNIKA ZSM 5100-2000

Call

Condition: used, Year of construction: 1975, workpiece diameter 125 mm grinding depth 50 mm clamping length 2000 mm total power requirement 0,5 kW weight of the machine ca. 1000 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 5100 2.000 Year approx.. 1975 S/N 66 32 7872 J 3278 _____ Distance between centres 50 2.000 mm Height of centres approx. 125 mm Workpiece Ø in clamping Vice 8 125 mm Swing of workpiece over tailstockguide 290 mm Swing of Workpiece max. over grinding head pillar 300 mm ght of workpiece 250 kg Max. centre hole taper Ø 2 50 mm Max. centre hole taper angle 60 ° Clamping range of vice approx. 5 160 mm B93va9v3hm Grinding head adjustable in vertical axis 160 mm Stroke of grinding tool on workpiece 0.75 5 mm Grinding tool Ø 15 60 mm Grinding spindle speeds 13,000 45,000 rpm Total electrical load, approx. 1 kW - 380 V - 50 Hz Weight, approx. 1.000 kg Accessories / Special Features Machine is suitable for workpiece length up to 2.000 mm with a basement extension * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. The workpiece remains stationary, enabling the generation of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw vice which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering vice with carbide inserts. Manual adjustment of appropriate workpiece diameter with clamping screw. * Dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form and with oscillation of diamond tool. * Pre-centering device for Workpiece adjustment between centers. * Pneumatic Oil Lubrification of grinding spindle by oil-mist. * Manually adjustable Tailstock with handwheel but without motorized drive. Condition : Good to very good. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

more

Listing

Metzingen

1,155 km

REM ohne

Call

Condition: used, Year of construction: 1978, workpiece diameter 100 mm grinding depth 50 mm clamping length 1000 mm Q0kbz total power requirement 0,5 kW weight of the machine ca. 0,4 t dimensions of the machine ca. m

more

Listing

Metzingen

1,155 km

TECHNICA ZSM 1000

Call

Condition: used, Year of construction: 1975, workpiece diameter 8-125 mm grinding depth 130 mm clamping length 50-1100 mm max. workpiece diameter 0 mm min. workpiece diameter 0 mm workpiece length mm total power requirement 1 kW weight of the machine ca. 500 kg dimensions of the machine ca. m T E C H N I C A (Switzerland) Centre Hole Grinding Machine Model ZSM 1000 Year approx. 1975 Serial No. J 1400 _____ Distance between centres 50 1,100 mm Height of centres 145 mm Workpiece Ø 8 125 mm Max. centre hole taper Ø 2 50 mm Max. centre hole taper angle 60 ° Clamping range of vice 4 150 mm Stroke of grinding head 130 mm Stroke of grinding tool on workpiece 0.75 5 mm Grinding tool Ø 15 60 mm Grinding spindle speeds 13,000 45,000 rpm Workpiece drive 0 rpm Total electrical load, approx. 0.5 kW - 380 V - 50 Hz Weight, approx. 500 kg Accessories / Special Features: * A cone shaped grinding wheel is employed, but it is only in line contact with the centrehole surface, in addition it is reciprocating simultaneously along this line. Wakhz2kj * The workpiece remains stationary, enabling the procuction of perfect centre holes. * To clamp cylindrical Workpieces one uses a height adjustable 2 jaw chuck which gives three point contact and always coincides with the center of the grinding spindle. * Height-adjustable workpiece centering tool with carbide inserts. Manual adjustment of appropriate workpiece diameter with a rachet coupling. * Manual dressing device, mounted on the side of the grinding spindle, stroke approx. 40 mm, for producing a geometrically exact conical form. * Pre-centering device for Workpiece only partially available. * Height-adjustable tailstock and bore in machine base allow longer workpieces. Condition : average to good/should be reconditioned. Machine can be inspected under power. Delivery : Ex stock, as inspected Payment : Net, after conclusion of contract

more

Listing

Thurmaston

338 km

SMT No 2-8"

Call

Condition: excellent (used), Workpiece diameter range 1.6 – 76mm, grinding wheel size 508mm diameter x 203mm wide x 305mm bore, regulating wheel size 305mm diameter x 203mm wide x 127mm bore, speed range 12-300rpm, spindle power 12Kw, Fzfwpdk Siemens 828D control.

more

Listing

Staufenberg

968 km

JUNKER BBE 15 CNC

Call

Condition: used, Year of construction: 2001, machine/vehicle number: 5012, grinding diameter max.:3-220 mm regulating wheel width:500 mm max. width of grinding wheel:500 mm grinding motor:55 kW peripheral speed:max. 63 m/sec workpiece length:500 mm regulating wheel dimensions:350 x 500 x 203 mm dimensions of grinding wheel:CBN 500 x 500 x 305 mm Cii7ysepi9 grinding wheel size:KORUND 610 x 500 x 305 mm total power requirement:138 kVA weight of the machine ca.:16 t. dimensions of the machine ca.:4,47 x 2,77 x 2,49 m. Centerless Grindign Machine JUNKER JUPITER 500 CNC SIEMENS in good condition. Including: · 2 robots Kuka KR 16 Year 2007 · CNC loading and unloading device Promot EPL60NC Year 2007 The machine was lately used for grinding of guide bushes (through grinding). Plunge is possible. JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls.

more

Listing

Butzbach

981 km

Mikrosa Kronos LX

Call

grinding wheel width: 660 mm, grinding wheel diameter: 600 mm, Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, Mikrosa Kronos XL Year of construction 2002 Wd7egf8ne

more

Listing

Hattingen

832 km

LIDKOEPING CL 520

Call

Condition: used, Year of construction: 1987, grinding diameter max. 75 mm grinding diameter - min. 2,5 mm grinding wheel diameter 508 mm max. width of grinding wheel 254 mm regulating wheel width 254 mm regulating wheel diameter 280 mm weight 8,6 t Centerless Grinding Machine | Lidkoping 520 Equipped with: C9yzmfu - 1 Electrobalance system - 1 CNC plunge on the working wheel - 1 CNC drive motor on the control grinding wheel - Automatic pass on the workung wheel diamond cutter - 2 hydraulic diamond cutters - 1 Ruler holder for working in a row The machine is in a well contained condition. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: CL520 | CL-520

more

Listing

Sondermaschinenbau Ernst Born CNC-Schleifmaschine

Biebertal

963 km

centerless cylindrical grinding machine

Sondermaschinenbau Ernst Born CNC-Schleifmaschine

€12,000

ONO plus VAT

Call

grinding wheel width: 25 mm, workpiece weight (max.): 5 kg, grinding wheel diameter: 160 mm, motor power: 2 W, total height: 160 cm, total width: 120 cm, total length: 140 cm, grinding diameter: 5 mm, input power: 2 kW (2.72 PS), grinding length: 300 mm, type of input current: AC, rotational speed (max.): 2,800 rpm, feed length X-axis: 500 mm, feed length Y-axis: 300 mm, travel distance Z-axis: 300 mm, Condition: ready for operation (used), Year of construction: 2005, Operating hours: 500 h, machine/vehicle number: CNC B1, CNC grinding machine for centering optical lenses, metal and ceramic parts can also be machined by converting chucks. Bgrthvtwg8f ceramic parts can also be machined.

more

Listing

Staufenberg

973 km

NOMOCO VSR 3-120 (Drm. 50 mm)

Call

Condition: good (used), Year of construction: 1990, centerless cylindrical grinding machine make NOMOCO type VSR 3-120 machine no. 449 year of construction 1990 9wvdkwm Technical data: WORKING RANGE: max. grinding length (for plunge grinding) 120 mm grinding diameter min/max. 1-50 mm grinding spindle tool holder taper 1:10 workpiece spindle swiveling +- 5° max. grinding wheel dimension 300x120x127 mm max. control wheel dimension 250x120x127 mm Spindle speed in 1/min VS 20 m/sec drive power 380 V 50 Hz 5,5 kW speed 1500 rpm. Outer dimensions 2,0x2,0x1,5 m weight approx. 2500 kg used, in good condition SPECIAL PRICE ex stock!!!

more

Listing

Leipzig

1,139 km

ESTARTA 312

Call

Condition: used, Year of construction: 1996, grinding diameter: 1,5 - 75 mm grinding wheel diameter: 400 mm grinding wheel width: 160 mm work stroke: 0 - 1 mm working feed: stufenlos/ continous mm/min grinding wheel speeds: 1300 U/min control for program: Num 1020 GC total power requirement: 14 kW weight of the machine ca.: 3,8 t dimensions of machine: 3,0x2,2x2,2 m dimensions electric cabinet LxWxH: 1,5x0,4x2,0 m CIRCULAR GRINDING MACHINE - alloyed round steels as well as (grooving process) throughfeed process. - In the plunge process, the plunge-cut length is max. 160mm. - Workpiece removal automatically via rail (its function or operation is not known to WMW AG) - grinding wheel with reshaping device, speed = 1300 rpm. - regulating grinding wheel with reshaping device, infeed angle right 0-6° and left 0-2°; wheel size 280x160mm - automatic grinding wheel balancing system accessories: various grinding and regulating wheels on request The machine is operating in manual mode! The control is in the Catalan language and none of our employees can control the machine or understand the language. Bevgtt9bqd

more

Listing

Ried im Oberinntal

1,346 km

JUNKER Jupiter 500

Call

Condition: used, Year of construction: 2008, machine/vehicle number: 5207, grinding diameter max.:3-220 mm regulating wheel width:500 mm max. width of grinding wheel:500 mm weight of the machine ca.:16 t. dimensions of the machine ca.:4,12x 2,052 x 2,49 m. grinding wheel diam. min/max.:420-610 grinding wheel diameter - width-internal grin:304,8 x 500 mm Regulatin wheel diameter min/max.:300-350 mm JUPITER's Centerless grinding, also available with CBN. Junker this circular grinding method with CBN grinding wheels, which opens up significant productivity benefits from the long service life of the grinding wheel, especially at high volumes. In addition, the simultaneous removal takes on the entire Schleswig-Holstein, which provides both in mass production and in small batches for significantly reduced processing times. The grinding process with JUPITER When centerless grinding, there are two grinding processes: the through grinding and plunge. Both methods are possible with the JUPITER. Applications through grinding: Kl77ms7m Pin and Bushings Body, rings, smaller rings, piston parts (eg compressors), waves with constant diameter piston rods (eg shock), Small piston for hydraulic and fuel injection, precision wires and rods, piston pins. Applications Plunge: Rotor shafts, transmission parts, bearing surfaces of camshafts, tube and pipe fittings for composite camshafts, universal joints, parts for needle injection, valve stems, barrel rolls.

more

Listing

Böhmenkirch

1,175 km

PALMARY GC 1810-NC Neue Maschine

Call

Condition: new, Year of construction: 2023, Grinding wheel DxB 455 x 255 mm workpiece diameter 1-60 mm, control disc DxB 255 x 255 mm, disc speed 10-100 rpm, power SS 11 kW, weight approx. to 3.7, size approx. 2,700 x 1,700 mm 9k9j0kxz9 Machine is suitable to the pass and feed grinding, hardened and ground Guide pave grinding and control spindle with hydrodynamsicher three-point bearing, lubrication for carriage and delivery spindles, rule discs powered by DS engine, frequency controlled, hydraulic dressing equipment for grinding and rule disc. Equipment of electrical, predominantly with Siemens components, electrical cabinet in Germany built up, GC 1810-NC stepper motor with Siemens S7 control for grooving and extra movement. Very economic price / performance ratio

more

Listing

Ulm

1,199 km

Cylindrical grinding machine (centerless)

WMW MIKROSA SASL 125

Call

Condition: good (used), machine/vehicle number: 16.52 28 33, a well preserved centerless grinding machine Fab.MWM MIKROSA TYPE:SASL 125 Ba3numxr

more

Auction

LIDKOEPING CL 520

Condition: excellent (used), Functionality: fully functional, TECHNICAL DETAILS grinding diameter: 2,5 - 75 mm Bar grinding diameter: 2.5 - 50 mm grinding wheel diameter: 508 mm grinding wheel width: max. 254 mm Drill diameter: 203 / 229 mm Peripheral speed: 33 / 45 / 60 m/s regulating wheel diameter: 280 mm regulating wheel width: 254 mm drilling diameter: 165 mm speed worm gear: 10 - 200 rpm Speed bevel gear screw drive: 25 - 600 rpm MACHINE DETAILS Dqhyazwpg motor power: 35 kW footprint: 1500 x 4450 mm net weight: 7200 kg total weight: 8,6 t Transport volume: 17 cbm EQUIPMENT - 1 balancing device - 1 CNC drive motor on the regulating wheel - Automatic dresser - 2 hydraulic dressers - 1 through-grinding device

more

Listing

Beringen

1,191 km

DANOBAT-ESTRADA 301 MV

Call

Condition: excellent (used), Grinding diameter 1.5 - 50 mm Grinding wheel 300 x 125 x 175 mm Speed 10-250 rpm GE FANUC QuickPanel control Misc. accessories MARCELS MASCHINEN AG Idfpwrb0k

more

Listing

Portugal

1,814 km

Mikrosa Kronos S 250

Call

Condition: excellent (used), Year of construction: 2014, Min/Max Grinding Ø1.5/35mm. Maximum Grinding Length While Plunge Grinding 245mm. Grinding Wheel Dimension Ø450 x 250mm Wide. Wheel Bore Ø203.2mm. Regulating Wheel Dimension Ø250 x 250mm Wide. Maximum Wheel Speed 7,200rpm. Dittel Dynamic Balancing Unit. S/No. 15005008 (2014). Lvoeqiluvv

more

Listing

Kirchheim unter Teck

1,156 km

CNC centerless cylindrical grinding machine

TSCHUDIN Ecoline 400

Call

Condition: used, Year of construction: 2005, Working areas throughfeed-grinding: workpiece dia 1,5-50 mm working area plunge grinding: workpiece dia 1,5-100 mm working area plunge grinding: greatest length 250 mm grinding wheel - outer dia max 400 mm grinding wheel inner dia 203,2 mm Z08tcaw grinding wheel wide max 250 mm grinding wheel peripheral speed 50 m/s Grinding wheel Drive power with balancer 11 kW control wheel outer dia max 225 mm 127 mm control wheel width max 250 mm control wheel tilt angle max +5/-5 ° control wheel driving power 3,7 kW temperature 15-40 °C compressed air max 6 bar total power requirement kW weight of the machine ca. 4,5 t dimensions of the machine ca. 1880x2370x1950 mm

more

Listing

Sauldorf

1,190 km

Nomoco VSR 4-180 CNC

€30,500

EXW ONO plus VAT

Call

Condition: excellent (used), Year of construction: 2011, Year of manufacture: 2011 (Revision + CNC) Machine - No.: 2493 Control: Siemens Sinumerik 840D Working range Ø: 2 - 80 mm grinding wheel: diameter: 406 mm wheel width max.: 180 mm Drive motor: 15 kW regulating wheel: Diameter: 350 mm disc width max.: 180 mm Drive motor: 20 Nm Dimension: 2.800 x 1.800 x 3.100 mm (L x W x H) Weight: 4.600 kg Voltage: 400V Fuse protection: 50A Accessories: - Vibratory feeder - belt filter - Oil mist extraction - feeding automation - Documentation in paper form Djq0mf Available immediately Without warranty

more

Listing

Iserlohn

858 km

KOEBAU MULTIMAT 150-6

€18,500

ONO plus VAT

Call

Condition: good (used), Year of construction: 1987, Centerless cylindrical grinding machine Make Koenig&Bauer Type:Multimat 150-6 Year.1987. Grinding diameter : 2 - 100 mm Largest workpiece length for plunge grinding : 250 mm Chpoptr7jl More data See data sheet Machine in stock . Good general condition machine documentation available.

more

Listing

Metzingen

(dealership location)

1,153 km

KOENIG & BAUER MULTIMAT 150-5

Call

Condition: used, Year of construction: 1978, grinding diameter max. 100 mm regulating wheel width 200 mm max. width of grinding wheel 200 mm grinding diameter 100 mm grinding length 250 mm feed in mm working area mm speed m/min Bar length mm total power requirement 25 kW weight of the machine ca. 4.500 t dimensions of the machine ca. m K O E N I G & B A U E R (Germany) Centreless Grinder with Plunge-in Grinding Device Model Multimat 150 - 5 Year approx. 1978 S/Nr. 73 918 _____ Grinding Ø regular/maximal 2 50/100 mm Max. length of workpiece for Thru-Feed-grinding 250 mm Max. length of workpiece for plunge-cut grinding 200 mm Grinding wheel size, Ø x width 600 x 200 mm Regulating wheel size, Ø x width 300 x 200 mm Dyvb0i Grinding wheel speed, max. 1.450 rpm/35 m/sec. Regulating wheel speeds (stepless) 10 140/230 rpm Regulating wheel tilt plus/minus +3 / 5 ° Stroke of Dressing Device 200 mm Grinding wheel drive, approx. 18,5 kW Total electrical load approx.. 25 kW - 380 V - 50 Hz Weight approx.. 4.500 kg Accessories/Special Features: * Machine is suitable for a Plunge-In Grinding Process with a manual workpiece Injection device and a pneumatic driven workpiece lift-off device after grinding Process. The final removal of the finished parts is by hand. * Actually mounted a workpiece rest for medium sized workpieces, (maybe 50 mm) * The Regulating wheel slide/workpiece rest carriage can be inclinate by 3 to 5 degrees to compensate cylindrical errors. * The infeed adjustment of workpiece saddle is controlled by a hydraulic plunge-in device with a cam device for quick-feed forward and backwards, also there is a fine infeed actuated by a step motor controlled by MARPOSS Unit. * The grinding spindle unit is fixed and accommodates a complex hydraulic dressing device with template and the slide can be swivelled for profiling plane shoulders, stepmotor for the infeed of diamond tool compensation, also there is mounted a hi pressure coolant nozzle to cool down the diamond tool and to rinse the grinding wheel. * Hydraulic driven Copy Dressing device mounted above the regulating wheel. * The regulating wheel speed is steplessly adjustable, higher speed during dressing poc. * The control panel contains all machine functions like Numbers of dressing cycles, number of workpieces, adjustable spark-out time, speed range, manual or automatic process, etc. * some sep. Flanges and grinding and regulating wheels, tool for changing the flanges,separate Hydraulic and sep. Switch cabinet, central lubrication, MARPOSS Unit, * ! Actually there is no Coolant device available ! Condition : Good to very good. Machine can be inspected under power. Ideal for small batch production. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

more

Auction

Cylindrical grinding machine - centerless

Mikrosa M 400 CNC

Condition: good (used), Year of construction: 1996, machine/vehicle number: 009005005, Functionality: fully functional, TECHNICAL DETAILS working range: 2 - 200 mm bar length: 500 mm dressing speed: 500 rpm control: Siemens 840 C control wheel width: 400 mm control wheel bore: 152 mm regulating wheel diameter: 350 mm control wheel speed: 10-150 rpm Control wheel drive: 11,3 kW grinding wheel width: max. 400 mm grinding wheel diameter: max. 660 mm grinding wheel bore diameter: 304.8 mm Cy7fch7kmr grinding wheel speed: 63 m/s Grinding wheel drive: 45 kW MACHINE DETAILS weight: 10 t Connection: 400 V / 50 Hz / 3 phases Rated power: 115 kW

more

Auction

KOEBAU Multimat 400

Condition: good (used), Year of construction: 1994, machine/vehicle number: 073000312, Functionality: fully functional, TECHNICAL DETAILS grinding diameter: max. 200 mm regulating wheel width: 400 mm grinding wheel width: max. 400 mm Control name: Siemens 840 C Profile depth: max. 15 mm Wbxabfa9 Gr. workpiece length plunge grinding: 500 mm drive grinding spindle: 50 kW regulating wheel speed: 10 - 150 1/min regulating wheel drive: 3 kW regulating wheel inclination: +2° / -6 ° peripheral speed: 31,5 / 63 m/sec MACHINE DETAILS machine weight: approx.10 t operating voltage: 400 V / 3 phases / 50 Hz rated current: 160 A

more

Listing

Mörsdorf

1,131 km

KOEBAU KOENIG & BAUER Multimat

Call

Condition: repair required (used), centerless cylindrical grinding machine make KÖBAU KÖNIG & BAUER type Multimat Make # 491889, WA3480 Technical data: Grinding wheel size 400 x 100 mm regulating wheel diameter x width 300 x 100 mm 11 speeds of the regulating wheel 10 - 90 rpm Drive power 15,5 kW dimensions L x W x H 2000 x 1700 x 1670 mm weight 2950 kg used, in good condition special price ex stock Mörsdorf because in need of repair a chain is missing in the machine the gears guiding the chain are defective Cziekpv2

more

Listing

Bonneville

1,245 km

Centerless Cylindrical Grinding Machine

ROSSI 300

Call

Condition: good (used), - Grinding wheel width: 100 mm Voia33yv - Working wheel diameter: 300 mm Equipped with : - 2 hydraulic diamond cutters - 1 Ruler holder for working in a row - 1 Manual dive

more

Listing

Berlin

1,143 km

Tschudin AG ESO 300

Call

Condition: ready for operation (used), Year of construction: 1989, There are two Tschudin ESO 300 available, grinding disk dimensions: 300x125x140mm, grinding spindle rotational speed: 1050/2100/min, weight: 1.9t, with documentation. Py9hva

more

Listing

Metzingen

1,155 km

BRYANT 45 M / Serial No. B 16049

Call

Condition: used, Year of construction: 1973, grinding diameter max. 30 mm regulating wheel width 12 mm max. width of grinding wheel mm total power requirement kW weight of the machine ca. t Buyhxaxq dimensions of the machine ca. m

more

Listing

Aalen-Ebnat

(dealership location)

1,182 km

LIDKOEPING CL 660

Call

Condition: used, Year of construction: 2000, grinding diameter max. 600 mm regulating wheel width 600 mm max. width of grinding wheel 600 mm total power requirement kW weight of the machine ca. t dimensions of the machine ca. m N8ftf Spindle set consisting of spindle shafts for mounting of grinding and also regulating wheels suitable for a LIDKOEPING CL 660. A number of sets are available.

more

Listing

Cestona

1,352 km

K-YUANG M10100

Call

Condition: good (used), Brand: K-YUANG Model: M10100 Grinding parts diameter: 10-100 mm Continuos Grinding (Standard frame): 210 mm Plunge feed: 195 mm Abrasion wheel specification P500 x 200 x305 mm Guide wheel specification: PSA 350 x 200 x 127 mm Abrasion wheel rotate speed: 1250 r/min Guide wheel rotate speed:(Infinite) 10-200 r/min Guide Wheel rotation Angel: In vertical plane: -2º- +5º In horizontal plane: 0º- +3º B8g9j3ekxv Feed hand wheel scale: 0.002 mm Plunge-cut-Grinding Stroke: Total Stroke Volume: 3.5 mm Quick Stroke Volume: 2-3.5 mm Slow Stroke Volume: 0-1.5 mm Length from Abrasion Wheel and the centre of Grinding Wheel to the underside of Bed: 255 mm Machine gross power: 22.46 kw Machine size (exclude electricity box, lubrication tank and water tank : 2675 mm x 1505 mm x 1615 mm Machine weight 5000 kg

more

Listing

Fuente de Cantos

1,920 km

Centerless Precision Cylindrical Grinding Machine

ESTARTA 327 CNC

Call

Condition: used, GENERAL CHARACTERISTICS Grinding Wheel Dimensions (OD x ID x width) Ø650xØ304.8x500 mm Ø min / max to be ground 3/200 mm Peripheral Speed of Grinding Wheel (m / s) 35 m / s Regulating wheel width 500 mm No. infinite regulating wheel speeds Min / max speed of regulating wheel (r.p.m.) 10/225 rpm Diamond cutting (Auto / Manual) Automatic CNC both grinding wheels Infinite dressing speed of 10/225 rpm Lubrication (Auto / Manual) automatic Control type (CNC / Manual) CNC No. of CNC axes 6 Plongée (auto / manual) Automatic CNC Regulating Wheel Dimensions (OD x ID x width) Ø355xØ203.2x500 mm Grinding wheel width 500 mm Maximum length to be rectified in plongeé 500 mm ELECTRICAL CHARACTERISTICS Coquxnx Grinding wheel head motor power 55 Kw

more

Listing

Berlin

(dealership location)

1,143 km

Nomoco M100

Call

Condition: ready for operation (used), Year of construction: 1987, There are two Nomoco M100 available, operational hours counter: 55,998h, with instruction manual, machine 1 is functional, but on machine 2 the control system has lost machine-specific programms/data that must be reloaded. Vxkyge

more

Listing

Fuente de Cantos

1,920 km

GOZUA RHC 125P

Call

Condition: used, Year of construction: 1972, General characteristics Grinding Wheel Dimensions (OD ... 500 x 250 x 304.8mm Ø min / max to be ground 3/125 mm Regulating wheel width 250 mm Control type (CNC / Manual) Manual Regulating Wheel Dimensions (OD x ... 350 x 250 x 125 mm Grinding wheel width 250 mm Maximum length to be ground in plongeé 250 mm Bkyqdb9rn3 Electrical Characteristics Total Power 28Kw Voltage 220/380 V

more

Listing

Fuente de Cantos

1,920 km

ESTARTA 320

Call

Condition: refurbished (used), GENERAL CHARACTERISTICS Ø min / max to grinding 1,5 / 100 mm Ø Grinding Wheel Dimensions (OD x ID x width) Ø 406 x Ø 203 x 200 mm Grinding wheel width 200 mm Regulating wheel width 200 mm Regulating wheel speed nº infinitas Min/max Regulating wheel speed (r.p.m.) 10 / 250 rpm Lubrication (Auto/Manual) Manual Control type ((CNC/Manual) Manual Infeed (auto/manual) Manual Regulating Wheel Dimensions (OD x ID x width) Ø 270 x Ø 140 x 200 mm ELECTRICAL CHARACTERISTICS Jvauim Motor power grinding wheelhead 15 kW DIMENSIONS AND WEIGHTS High 1420 mm Long 2020 mm Weight 4200 Kg Width 1300 mm

more

Listing

Fuente de Cantos

1,920 km

SCHAUDT MIKROSA M-250

Call

Condition: excellent (used), Year of construction: 2003, GENERAL CHARACTERISTICS Ø Grinding Wheel Dimensions (OD x ID x width) Ø650 x Ø304,8 x 250 mm Cdyruremo Ø min / max to grinding 1,5 / 100 mm Peripheral Grinding Wheel speed (m/s) 63 m/s Regulating wheel width 250 mm Min/max Regulating wheel speed (r.p.m.) 5 - 600 rpm Dressing (Auto/Manual) AUTO CNC Diamond dressing speed 600 rpm Lubrication (Auto/Manual) AUTO Control type ((CNC/Manual) CNC CNC Brand SIEMENS CNC Model 840 D sl CNC Axes Nº 10 machine + 6 load and unload Infeed (auto/manual) AUTO Regulating Wheel Dimensions (OD x ID x width) Ø350 x Ø127/152 x 250 mm Grinding wheel width 250 mm Maximum Infeed grinding length 250 mm ELECTRICAL CHARACTERISTICS Regulating Wheel motor power 8,5 kW Motor power grinding wheelhead 22 kW Total Power 55 kW Voltage 380 v DIMENSIONS AND WEIGHTS Long 3.600 mm Width 1.800 mm High 2.200 mm Weight 14.000 kg OTHER FEATURES Accessories Included: auto loading and unloading, automatic infeed part storage, automartic postprocess measurer with autocorrection, automatic wheels balancer

more

Listing

Fuente de Cantos

1,920 km