Used Chiller for sale (829)

Condition: used, Year of construction: 2017, functionality: unexamined, Riedel L24/26/23 TR5-P / 01.01G Kdjdpfx Ajzln Rxjh Dsr - Delivery possible for an additional charge.

Condition: excellent (used), Year of construction: 2011, operating hours: 26,882 h, functionality: fully functional, travel distance X-axis: 310 mm, travel distance Y-axis: 270 mm, travel distance Z-axis: 270 mm, Exeron S 310 MF Year of manufacture: 2011 Generator hours: 26882 Control system: Exowin 20 X, Y, Z travel: 310 x 270 x 270 mm C-axis 3R tool holder in the spindle Erowa chuck on the machine table with magnetic plate Generator: 64 A C-box for carbide and PKD tools Ksdpfxjzguk Uo Ah Dedr 20-position tool changer Fire extinguishing system Chiller Aluminum clamping plate, Erowa Documentation Machine is connected and available for inspection.

Condition: like new (used), Year of construction: 2015, operating hours: 12,500 h, machine/vehicle number: EWADC22C-XS003, cooling capacity: 2,000 kW (2,719.24 HP), type of input current: three-phase, type of cooling: air, ambient temperature (max.): 46 °C, ambient temperature (min.): 35 °C, TECHNICAL SPECIFICATIONS Brand: DAIKIN Model: EWADC22C-XS003 Cooling Performance Cooling Capacity: 1933 kW Cooling Capacity (Kcal/h): 1,720,000 Kcal/h Energy Efficiency Ratio (EER): 2.63 Seasonal Energy Efficiency Ratio (ESEER): 4.02 IPLV (Integrated Part Load Value): 4.47 Evaporator Type: Shell & Tube (Direct expansion) Max. Water Side Operating Pressure: 10 bar Water Volume: 850 liters Nominal Water Flow: 92.2 l/s Water Inlet/Outlet Temperature: 12.0°C / 7.0°C Connection Diameter: 273 mm Insulation Material: Closed cell Condenser Type: Aluminum finned, internally grooved copper tubes Fan Type: Propeller type, glass fiber reinforced resin Fan Diameter: 800 mm Number of Fans: 30 Fan Motor Power: 52.5 kW Fan Speed: 900 rpm Nominal Air Flow: 160,327 l/s Compressor Type: Asymmetric single screw, semi-hermetic Model: 3 x HSA2690524 Quantity: 3 Oil Charge: 75 liters Control Mode: Stepless modulation (25% – 100%) Start Method: Star-Delta (Y-Δ) Refrigerant Type: R-134a Charge Amount: 360 kg Number of Circuits: 3 Dimensions and Weight Width: 2,285 mm Length: 14,785 mm Kdedeuma Thepfx Ah Djr Height: 2,540 mm Unit Weight: 12,600 kg Operating Weight: 13,470 kg Electrical Specifications Voltage: 400V / 3 Phase / 50 Hz Voltage Tolerance: 10% Nominal Running Current: 1100 A Max Starting Current: 1486 A Max Current for Wire Sizing: 1608 A Control and Automation Control Panel: MicroTech III Remote Monitoring: Modbus RTU, BACnet/IP, LonWorks, TCP/IP Temperature Regulation Accuracy: 0.1 °C Advanced Protection: High/low pressure, oil pressure, motor temperature, freeze protection, phase monitoring Sound Level Sound Power: 104 dB(A) Sound Pressure: 81 dB(A) 1 meter distance

Year of construction: 2014, condition: ready for operation (used), A refrigeration unit ERS is available. Refrigerant: R407C, refrigerant quantity: 13kg, heat inlet/outlet temperature: 15°C/20°C, cooling capacity: 25580W, tank volume: 360l, pump capacity at 390kPa: 4.4m³/h, max. operating pressure low/high: 22bar/29bar. Machine dimensions: approx. 1650mm/900mm/2000mm, weight: approx. 930kg. Documentation available. An on-site inspection is possible. Kdjdsxr Nwgopfx Ah Der

Condition: ready for operation (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, type of cooling: water, input voltage: 400 V, Equipment: cooling unit, type plate available, This single-stage absorption chiller is in perfect condition and ready for operation. It runs on hot water and uses Advaguard as the working fluid. Available in two configurations: with the installation container or without it. Power: 1500 kW Model: Millenium HW-3B2/4C1-50-C-S-C Year of Manufacture: 2008 Frequency: 50 Hz Voltage: 400 V Kodpfx Aeytyiwjh Dsdr Working Fluid: Advaguard

Condition: used, Year of construction: 2025, The YMAE 130 air-water inverter scroll modular heat pump is a compact, reversible heat pump with a heating capacity of 129 kW at 50/55°C and 7°C ambient temperature, and a cooling capacity of 124 kW at 7/12°C and 35°C ambient temperature. The COP is 2.72. Due to its modular design, up to 6 units can be connected together. Refrigerant used: R454B, plate evaporator, without pump. Eligible for BAFA funding. Kdsdpfjw S Df Tex Ah Dsr

Condition: like new (used), Year of construction: 2010, Power 1.1 kW, 220 V 50/60 Hz, Weight 55 kg Coolant R410A. 970 g Ksdpfxjwa R H Us Ah Dsdr 3 units available The air coolers were installed on newly purchased EDM machines. Due to the existing central water cooling system, the air coolers were removed before commissioning.

Condition: used, Refrigerant Condenser, Liquid Cooler, Güntner Cooler, V-block Cooler, Industrial Radiator, Used Machine Manufacturer: Güntner Model / Type: GFD 080.1D/2x4-MS1D/4P.E Overall dimensions: 5404 x 2400 x 2850 mm Coolant: Ethylene glycol 35 Vol. % Weight: 2694 kg Cooling capacity: 331.7 kW Kdsdszkynyopfx Ah Der Number of fans: 8 pcs Fan diameter: 800 mm

Condition: used, functionality: fully functional, Year of construction: 2017, operating hours: 26,787 h, control type: CNC control, degree of automation: automatic, actuation type: electric, controller manufacturer: FANUC, laser type: CO₂ laser, laser source manufacturer: FANUC, laser power: 4,000 W, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 12 mm, sheet thickness aluminum (max.): 8 mm, type of cooling: water, Equipment: CE marking, cooling unit, documentation/manual, dust extraction, fume extraction, safety light barrier, Amada Alpha LC2415NT 4 kW laser cutting system with loading and unloading unit, as well as storage tower with 7 storage positions (LKI). Suitable for both single-part and high-volume production. Regularly serviced by technicians; condition according to operating hours is very good. The chiller unit is equipped with a connection for heat recovery. The system has been dismantled, stored in an external warehouse, and can be inspected at any time. Maximum sheet size: 3000x1500mm. Kdsdpfx Ahjyfl U Ns Djr

Condition: new, Year of construction: 2018, functionality: fully functional, type of input current: three-phase, type of cooling: water, overall weight: 1,350 kg, input voltage: 380 V, total width: 2,560 mm, total length: 891 mm, total height: 1,810 mm, Geothermal water chiller by Climaveneta Mitsubishi Electric, water chiller with 233 kW capacity (with heat pump and heat recovery, year 2018, R-410A refrigerant, equipped with 4 scroll compressors, plate heat exchanger, dimensions: 2560x891x1810 mm (height), 1350 kg. Kodpfxsyvu Nfo Ah Dsdr New units can be sold individually or as a lot of 5 (brand new, unused units).

Condition: used, Year of construction: 2019, operating hours: 6,744 h, functionality: fully functional, machine/vehicle number: 1163744, travel distance X-axis: 1,016 mm, travel distance Y-axis: 660 mm, travel distance Z-axis: 635 mm, rapid traverse X-axis: 18,000 m/min, rapid traverse Y-axis: 18,000 m/min, rapid traverse Z-axis: 18,000 m/min, feed length X-axis: 1,016 mm, feed length Y-axis: 660 mm, feed length Z-axis: 630 mm, feed rate X-axis: 12,700 m/min, feed rate Y-axis: 12,700 m/min, feed rate Z-axis: 12,700 m/min, nominal power (apparent): 45 kVA, torque: 460 Nm, controller manufacturer: Haas, controller model: Haas, workpiece length (max.): 1,370 mm, workpiece width (max.): 610 mm, workpiece height (max.): 630 mm, workpiece weight (max.): 1,814 kg, total height: 630 mm, total length: 1,370 mm, total width: 660 mm, table width: 610 mm, table height: 630 mm, table length: 1,372 mm, table load: 1,814 kg, spindle speed (max.): 10,000 rpm, operating hours of spindle: 4,454 h, spindle motor power: 44 W, number of slots in tool magazine: 30, Equipment: chip conveyor, We have two machines: SPECIAL PACKAGE PRICE – €125,000 FOR BOTH MACHINES Haas VF-3 YT50 (Ad ID A22113533) + Haas VF-4SS (Ad ID 22522747) Buy both machines together for €125,000. Excellent opportunity for a complete Haas machining package. • Haas VF-3YT/50, 2019. • 10,000 rpm original high-performance spindle, 44.7 kW, vector drive, gearbox • 2-speed gearbox • ISO 50 tool holder • 30 ATC (Automatic Tool Changer) • Chip conveyor with 4 additional lead screws • RTAP-3 – Synchronized threading without expensive holders with compensation • TSC 300 psi (21 bar) • Coolant chiller • Programmable coolant nozzle • MIN QTY LUBE • Automatic air gun • TAB – air cooling through the spindle • Renishaw WIPS – measuring, scaling, rotation • High-speed machining • ACF 25-micron filter Kjdpfxozc Ni Sj Ah Dsdr • Electrical cabinet cooler • Mist condenser • 4th-axis pre-wiring • DWO/TCPC • WIFI connection to local network • WIFI camera • Automatic door • 15 tool holders • 4,454 hours of cutting (Spindle On Time) • 6,744 hours of cycle time The machine is powered on and available for inspection at any time. Complete documentation available. Original paint, no accidents, no crashes. Regularly maintained machine. Immediate availability.

Condition: excellent (used), functionality: fully functional, Year of construction: 2023, operating hours: 200 h, control type: CNC control, controller model: FSCUT, laser type: fiber laser, laser power: 3,000 W, sheet thickness (max.): 20 mm, sheet thickness steel (max.): 20 mm, sheet thickness stainless steel (max.): 8 mm, sheet thickness aluminum (max.): 8 mm, sheet thickness brass (max.): 8 mm, sheet thickness copper (max.): 8 mm, table length: 2,000 mm, table width: 1,000 mm, working length: 2,000 mm, working width: 1,000 mm, type of cooling: water, overall weight: 1,500 kg, Equipment: cooling unit, emergency stop, fume extraction, Z1313 CNC Fiber Laser – 3 kW – Year of manufacture 2023 – only 200 hours of operation – 2000×1000 mm – Private sale – €35,000 Description For sale is a Z1313 CNC fiber laser, manufactured in 2023, from a private owner. The machine has only been used privately, has approximately 200 hours of operation, and is in very good, fully functional condition. Ideal for metalworking, workshops, prototyping, small series production, and precise cutting work. Technical data Model: Z1313 Laser power: 3 kW fiber laser Working area: 2000 × 1000 mm Year of manufacture: 2023 Hours of operation: approx. 200 Condition: very good, ready for immediate use Control: CNC system including operating monitor Software: CypCut cutting software (FSCUT controller) DXF/AI/SVG import Kjdpszrfrysfx Ah Djdr Automatic nesting Material library Height control (BCS system) Cooling: 3 kW chiller Extraction: available Control cabinet: complete Accessories: various tools, clamping devices, small parts Reason for sale: No longer needed Special features: Private sale → no VAT, no guarantee

Condition: used, Year of construction: 2018, pressure: 32 bar, Our company is offering a pre-owned cooling/air conditioning unit from Kelvion, available from company inventory. Technical data (according to nameplate): Manufacturer: Kelvion Model: SPBE 35-F22 Market Year of manufacture: 2018 Article no.: 4463.35-22.P Electrical data: Connection: 230 V / 1~ / 50–60 Hz Total fan power: 360 W Defrost output: 2,600 W Heat exchanger: Tube volume: 3.90 litres Max. permissible pressure: 32 bar Temperature range: -40 °C to +100 °C Description: The device is an industrial heat exchanger / air cooler suitable for use in: Kdodpfx Ahjy Ex S Ae Der - Refrigeration systems - Air conditioning systems - Production or storage areas Typical applications include the food industry, logistics, or industrial cooling. Condition: - Used equipment - Signs of use consistent with age - Functionality not tested - Sale as-is / as inspected Terms of sale: - EXW (ex works; collection by buyer) - Company sale – no warranty, guarantee or returns

Condition: new, Year of construction: 2024, The FAS series are air-cooled refrigeration systems for industrial use. They are installed outdoors. The equipment of the FAS 064 is as follows: closed internal tank as well as a 3 bar pump and scroll compressors, winter package down to -10°C, The evaporator is a tube bundle installed in the internal tank. The refrigerant used is R454B Kdodjr D R Ubspfx Ah Der Cooling capacity at 12/7°C and 35°C ambient temperature 49kW

Condition: excellent (used), Year of construction: 2012, Brand : McQuay Model : PROXİMUS XE 450 Product Type : Water Cooled Chiller Cooling Capacity kW : 1757,0_kW/h Cooling Capacity Kcal/h : 1.511.000 kcal/h Evaporator : Shell & Tube Kodjilcqpepfx Ah Dodr Condenser : Shell & Tube Refrigerant Gas : R-134a Compressor : McQuay Controller : Carel Dimension mm. : 1710x4220x2190 Empty Weight Kg. : 4957 Kg

Condition: new, Year of construction: 2024, functionality: fully functional, overall weight: 90 kg, The cooling machine is for sale from DTE, it has the following dimensions; The coolant is in the device! Kdjdpfx Ahotn Uvnj Der LxWXH: 681 mm x 477mm x 570 mm Power : 4,9 KW Coolant : R-407C ca 1,1 KG

Condition: ready for operation (used), Year of construction: 2019, cooling capacity: 1 kW (1.36 HP), This is an used chiller with a nominal cooling capacity ~720kW at water +12/7°C. Bitzer screw compressors, R513A refrigerant. The unit is equiped with built-in pump and factory expansion vessel. Unit in good condition from our rental machine park. Transport not included.We provide 3 month guarantee (aplies terytory of Poland). Kedpfx Ajy Tmh Ueh Dodr

Condition: ready for operation (used), Year of construction: 2019, cooling capacity: 1 kW (1.36 HP), This is an used chiller with a nominal cooling capacity ~600kW at water +12/7°C. Bitzer screw compressors, R513A refrigerant. The unit is equiped with built-in pump and factory expansion vessel. Unit in good condition from our rental machine park. Transport not included.We provide 3 month guarantee (aplies terytory of Poland). Kedpoy Tmixefx Ah Dsdr

Condition: excellent (used), Year of construction: 2008, functionality: fully functional, type of input current: three-phase, travel distance X-axis: 1,020 mm, travel distance Y-axis: 510 mm, travel distance Z-axis: 510 mm, workpiece weight (max.): 800 kg, number of slots in tool magazine: 30, controller manufacturer: Fanuc, total height: 2,700 mm, total length: 4,080 mm, total width: 2,400 mm, overall weight: 7,000 kg, table length: 1,200 mm, table width: 510 mm, controller model: Oi-MC, coolant supply: 15 bar, spindle motor power: 15,000 W, number of spindles: 1, rapid traverse Z-axis: 30 m/min, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, spindle nose: BT40, spindle speed (max.): 12,000 rpm, table load: 800 kg, Equipment: chip conveyor, rotational speed infinitely variable, Doosan NM510 Vertical Machining Centre Machine Type: 3 Axis Vertical Machining Centre Year: 2008 Control: Fanuc Series Oi-MC Condition: Very Good Includes Swarf Conveyor Chiller MCF20 Coolant Filter Autolube 6 x Tool Holders Notes Vice and clamping block in photos not included Technical Specifications Table Size: 1200 x 510mm Table Load: 800kg Travel (X-Axis): 1020mm Travel (Y-Axis): 510mm Travel (Z-Axis): 510mm Max Spindle Speed: 12,000rpm Spindle Power: 18.5/15/11kW Spindle Taper: BT 40 Rapid Traverse (X/Y/Z): 36/36/30m/min Tool Storage Capacity: 30 tools Tool Change Time (T-T/C-C): 1.7/3.5sec Kdsdpfxjv Iq Ezs Ah Dor Machine Dimensions: 4080 x 2400 x 2700mm Machine Weight: 7,000kg Notes: *Specifications are given in good faith but not guaranteed*

Condition: ready for operation (used), Year of construction: 2018, operating hours: 6,000 h, travel distance X-axis: 800 mm, travel distance Y-axis: 800 mm, travel distance Z-axis: 600 mm, controller manufacturer: SIEMENS, table load: 1,000 kg, spindle speed (max.): 12,000 rpm, number of axes: 5, This 5-axis Alzmetall GS 1000/5-FDT was manufactured in 2018. It features a spindle speed of 12,000 RPM and a tool capacity of 125-126 positions, utilizing HSK 63 A and T holders for versatile operations. The machine includes a robust table load capacity of 1,000 kg and a high-pressure coolant system. If you are looking to get high-quality machining capabilities, consider the Alzmetall GS 1000/5-FDT vertical machining centre we have for sale. Contact us for further details. Kdodpfx Ajzvb E Dsh Djr - Tool Positions / Capacity: 125 - 126 tool positions- Tool Holder / Taper: HSK 63 A and T (T-holder with turning function & spindle orientation for full turn-mill operations)- Cooling System: 70 bar Internal High-Pressure Coolant, External Coolant, Internal & External Air Cooling- Coolant Tank Volume: 1,000 L, equipped with a paper belt filter and a safety filter in the coolant line upstream of the spindle.- Axis Configuration: 5-Axis (Torque motors in A and C axes for simultaneous milling/turning)- Operating Hours: Approx. 6,000 hours- Automation & Interface: Media supply (hydraulics & air), automatic door, prepared for automation, interface installed (robot missing)- Spindle Protection: Double spindle protection- Auxiliary Equipment: Chip conveyor, extraction unit (LTA Air Cleaning), external cooling/chiller unit- Electrical Input: Reduced from 60 to 30- Defects / Known Issues: Cracks in the front view windows due to previous tool breakage; tool chain ribbon has 1 fiber from a flat ribbed belt wrapped around it, causing stiffness and occasional emergency stops (E-stops)

Condition: new, Year of construction: 2022, functionality: fully functional, The unit is new. The technical specifications are as follows: Today, the same unit costs: €10,408.00. Kdjdpeg Eg Dyofx Ah Djr The unit is available immediately; it is in stock! L: 968mm x W: 968mm x H: 1075mm Cooling capacity: 7.4 kW Temperature: 5 degrees to -20 degrees at an ambient temperature of 27 degrees Tank: 45 liters Flow rate: 1090 l/h, 2.5 bar L: 968 W: 615 H: 1075 RAL 9001 Weight: 158 kg

Condition: excellent (used), Year of construction: 2013, operating hours: 11,000 h, functionality: fully functional, travel distance X-axis: 400 mm, travel distance Y-axis: 435 mm, travel distance Z-axis: 500 mm, rapid traverse X-axis: 36 m/min, rapid traverse Y-axis: 36 m/min, rapid traverse Z-axis: 30 m/min, feed rate X-axis: 15 m/min, feed rate Y-axis: 15 m/min, feed rate Z-axis: 15 m/min, nominal power (apparent): 54 kVA, torque: 117 Nm, controller manufacturer: Fanuc, controller model: i Series, workpiece height (max.): 200 mm, workpiece diameter (max.): 300 mm, total height: 300 mm, total length: 2,465 mm, total width: 2,835 mm, table width: 200 mm, table load: 60 kg, rotary table diameter: 200 mm, overall weight: 5,500 kg, spindle speed (min.): 120 rpm, spindle speed (max.): 12,000 rpm, operating hours of spindle: 11,000 h, coolant supply: 20 bar, spindle nose: DIN40, number of spindles: 1, number of slots in tool magazine: 30, tool length: 300 mm, tool diameter: 125 mm, tool weight: 8 g, input voltage: 400 V, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, rotational speed infinitely variable, 2013 Doosan DNM 200/5AX 5 Axis CNC Machining Centre Used 2013 Doosan DNM 200/5AX (4+1) 5-axis CNC machining centre with Fanuc i Series control, probe, tool holders, spindle chiller, transformer, swarf conveyor and only 11,000 run time hours. Manufacturer: Doosan Model: DNM200/5AX Machine Type: 5 Axis (4+1) Machining Centre Year: 2013 Control: Fanuc Series i Control Hours: 11,000 Run Time Hours Machine Description 2013 Doosan DNM 200/5AX CNC Machining Centre, a compact, high-performance 4+1 - 5-axis vertical machining centre ideal for precision engineering, toolmaking, aerospace, medical, motorsport, mould and die, and complex component machining. This machine is fitted with a Fanuc i Series CNC control and has only 11,000 run time hours, making it an excellent opportunity for manufacturers looking for a reliable used 5-axis machining centre with strong capability, premium features and valuable accessories included. The Doosan DNM 200/5AX is well known for combining compact footprint, rigid construction and 5-axis positioning. It is ideal for reducing setups, machining complex parts and increasing productivity compared with conventional 3-axis machining. Key Features 2013 Doosan DNM 200/5AX 4+1 5 Axis CNC Machining Centre Fanuc i Series Control Only 11,000 Run Time Hours Includes Renishaw OMP60 probe Includes tool holders Includes spindle chiller Includes transformer Includes swarf conveyor Compact 5-axis machining solution Ideal for complex component machining Technical Specifications X Axis Travel: 400 mm Y Axis Travel: 435 mm Z Axis Travel: 500 mm A Axis Travel: 150 Deg (+30 to -120Deg) C Axis Travel: 360 Deg Table Diameter: 200 mm Max Load on Table: 60 kg Max Workpiece: 300mm Dia x 200mm High Spindle Speed: 12,000 rpm Spindle Taper: DIN40 Pullstud: Nikken PS-806 Tool Capacity: 30 Station ATC Rapid traverse (X, Y): 36000mm/min Rapid traverse (Z): 30000mm/min Rapid traverse: (A - tilt axis) 20 rpm Rapid traverse: (C – rotary axis) 30 rpm Kdsdoy St Sdjpfx Ah Der Maximum feedrate: (X, Y, Z) 15000mm/min Maximum feedrate: (A, C) 7200 deg/min Feedback system: Absolute encoder Max Tool Diameter: 125mm Max Tool Length: 300mm Max Tool Weight: 8kg Spindle motor AC: 11/18.5kW Axis motor (XYZ): AC 4.0kW Axis motor (A axis): AC 3.0kW Axis motor (C axis): AC 1.6kW Power Requirements: 54.0 kVA Air Pressure: 6kgf/cm2 Machine Dimensions: 2465 x 2835 x 3091mm Approx. Machine Weight: 5,500 kg Run Time Hours: Approx. 11,000 hours Included With This Machine Renishaw OMP60 Probe Tool holders Spindle chiller Transformer Swarf conveyor Fanuc i Series CNC control Why Buy This Doosan DNM 200/5AX? This machine is a strong choice for companies searching for a used 5 axis CNC machining centre, used Doosan machining centre, Doosan DNM 200/5AX for sale, or compact 5-axis vertical machining centre. The 4+1 machining capability allows users to machine multiple faces of a component in fewer setups, helping to reduce handling time and increase production efficiency. With a compact table, high spindle speed and Fanuc control, this machine is particularly suited to small to medium batch production and complex prismatic parts. Applications This Doosan DNM 200/5AX is suitable for: Aerospace components Medical components Motorsport parts Toolroom machining Mould and die work General subcontract machining Complex 4+1 machining Notes: *Specifications are given in good faith but not guaranteed*

Condition: excellent (used), Year of construction: 2017, operating hours: 1,500 h, functionality: fully functional, machine/vehicle number: 17434268, type of input current: three-phase, input voltage: 400 V, electrical fuse: 63 A, input current: 61 A, input frequency: 50 Hz, pressure: 18 bar, stack height: 1,900 mm, total length: 1,600 mm, total width: 750 mm, tank capacity: 410 l, empty load weight: 315 kg, type of cooling: water, Machine Description and Technical Data 2.1 Machine Description The RED COMPACT units are delivered fully pre-assembled and require only electrical connection and hydraulic hookups on site. Main Components: A: Self-supporting frame with stainless steel cladding (panels 1–6 removable) B: Basin with evaporator Kdsdsxvca Aepfx Ah Djr C: Condenser unit D: Temperature controller E: Control cabinet F: Hydraulic circuit with pump (second pump optional) 2.2 Structure The compact monoblock housing contains all components necessary for operation. The external cladding is made of stainless steel; individual panels can be removed for maintenance purposes. 2.3 Basin The stainless steel basin houses the evaporator block. It is insulated with high-density polyurethane foam. A blower ensures water circulation within the basin. 2.4 Condenser Unit The condenser unit can operate with either cooling tower or well water, depending on order specification. It supplies the evaporator block and is located beneath the basin. 2.5 Temperature Controller The controller is a modern microcomputer with a high-resolution display and LED indicators for operating status. The control system is programmed to offer maximum operational safety with easy user operation. 2.6 Control Cabinet The control cabinet is dust- and splash-proof. It contains: - Main and emergency switch - Contactors, thermal relays, fuses - Safety transformer for control circuits Access is provided by removing panel 1 below the temperature controller. 2.7 Hydraulic Circuit with Pump Panel 3 is removed for connection. The following connections are provided: A – Water make-up (T1): Connection to water supply; fill level is controlled via float valve. B – Return line (T2): Return flow from the consumers. C – Overflow (T3): Connection to the process wastewater outlet. D – Chilled water outlet (P1): Supplies the consumers; open the shut-off valve before commissioning. A second pump (P2) is available as an option. E – Condenser water supply: The shell-and-tube condenser can be operated with well water or cooling tower water: Scheme A – Well Water: Use the small connections C1, C2 (inlet and outlet). The large connection remains closed. A pressure-regulated valve control can be installed as an option. Scheme B – Cooling Tower Water: Use C3 and C1/C2 in parallel to increase the flow cross-section. It is recommended to install a mechanical filter at the water inlet to prevent contamination. Manufacturer: FIC S.p.A. – Via Trivulzia 54, 23020 Mese (SO), Italy Model: RED COMPACT V.7

Condition: good (used), Cold water set, cooling water circuit, heat exchanger, cooling for spot welding device, spot welding machine, spot welding system, spot welding tongs -Chiller: complete refrigeration unit -Compressor: Danfoss type: MTZ22JC4A -Pump: Lowara type CEA70/5 0.55 kW Kdodpfx Aolpi Tqsh Der -Total dimensions: 740/710/H930 mm -Weight: 196 kg

Condition: new, Year of construction: 2024, cooling capacity: 68 kW (92.45 HP), type of cooling: air, overall weight: 870 kg, temperature: 7 °C, The FAS series are air-cooled refrigeration units designed for industrial applications. Installation is carried out outdoors. The FAS 096 configuration includes a closed internal tank, a 3 bar pump, and Bitzer scroll compressors. The refrigerant used is R454B. The evaporator is a shell-and-tube type installed inside the internal tank. Cooling capacity at 12/7°C and 35°C ambient temperature is 68 kW. Kodpfxstw U Dqj Ah Dsdr