11
Wood burning boiler from MAWERA FU 250 TRA model with 300 kW firing heat output and 250kW nominal heat output. All-rounder! Suitable for wood chips, sawdust, sawdust, solids, lump wood, etc.
Automatic underfeed firing.
Hdvmpms7
Complete plant incl. boiler, heat exchanger, piping, silo discharge (without hopper), cross conveyor, cellular wheel feeder UE178, ash separator with flue gas fan and filter, complete control system, etc.
Plant is functional, only the grate/chute in the combustion chamber...
4
Second hand machine
Used heating plant of the company Nestro/Fröling type Lignothermic with discharge
Lignothermic 100 kW boiler for wood chips and pellets firing
backfire flap between rotary feeder and stoker screw
Overfill protection for rotary valve or screw
Rotary valve MLD 150 up to 200 kW / d= 150 mm /
Room discharge type Kapa 501 GA/3 suitable for silo diameter 3 m
overfill protection
Briquette crusher screw KAPA GA
Drop chute with thermal discharge safety device 55 degrees
Cont...
new original packed wood chip heater
Svoa7k
ETA type E- Hack ( with intergated dust filter )
with stoker screw
no discharge with it
corresponds to the current limit values
14
It is a wood-chip heating system installed in the container. It can therefore be installed with maximum convenience at any location.
Heat output: approx. 900 KW
Fuel: wood chips, bark, other wood waste
Moisture content: 15-60%.
Medium: Hot water.
Charging: hydraulic feed through pre-drying channel.
Firing: moving grate
ash removal: fully automated
Control: fully automated
The system has been professionally maintained by us and is fully operational. It is being replaced because our heating requir...
9
Fröling wood chip furnace Lambdamat 150 IND-V
Moving stair grate 150 IND-V
Ash removal Lambdamat 150
Ash trolley 180 l
Safety battery for Lambdamat 150
Multicyclone dust separator up to 150 kW
Standard stoker with screw d=150 mm up to Lambdamat 320
Rotary valve 180 mm for Lambdamat
Level control L 1
Boiler accessories Lambdamat
Control cabinet Lambdamat H 3000, W/H/D 1000x1000x300 mm
Lambda control H 3000 for Lambdamat
Negative pressure control Up to 1,5 kW for Lambdamat H 3000
Furnace temperatu...
Wood chip heating with 280 KW heat output
Fireclay renewed 4 years ago
with discharge as push floor
0o92yv8b
8
Heat exchanger / SPIRAFLO.
Type - XTSD 104/64-6-304/316-C
Is made in 304 and 316 steel.
Year of manufacutre - 2013.
Empty weight - 2.000kg.
Inkfh39
Total dimensions - Length - 700cm. Width - cirka 235cm. Height - 200cm.
4
Heat Exchanger
Steam to water
Stainless steel
Qndcp
100mm hole centres
Pipe ID – 40mm
5
* General * SKU316S528 * LocationBarneveld * What you can expect from Foeth: all our machines are in working condition, and at a reduced price compared to new. They are ready for shipping to any destination worldwide. You are welcome to inspect our machines in Barneveld, The Netherlands. Visit our website Foeth for more information and many more machines!
Cpaue9bu
6
Centrifugal fan, chip extraction fan, fan, suction, chip fan
-Motor power: 37 kW
-Speed: 1470 rpm
Llsy2
-Volume flow: unfortunately not visible
-Total pressing: - da Pa
-Inlet connection: O 700 mm
-Outlet connection: O 700 mm
-Dimensions: 1750/1700/H2460 mm
-Weight: 900 kg
4
The chip conveyor is a single conveyor, it is used to continuously and reliably convey short broken metal chips from the working area of the machine tool into a collecting container and at the same time to separate the metal chips from the cooling lubricant. This ensures more efficient production processes, improved dimensional accuracy of the workpieces and a longer shelf life of the coolant.
The chip conveyor consists of a metal housing with a central chain strand and drivers. It is driven by...
14
Oven for industrial thermal processes serial number J6510E.09.01
Fitted with Eurotherm 3216 Temperature controller temperature is currently set to to maximum of 105 degrees C.
Max temperature adjustment can be made by resetting the temperature controller.
Openings are 200mm high x 750mm deep x 640mm wide both sides have twin decks so four decks in total.
The machine is 3 phase
Ideal for:
Catering
Plastics – extrusion
Heat treatment
Hot runner
Thermal forming
Ovens & chillers
Stress relieving
Ad...
6
Chip conveyors, conveyors with coolant tank BMF type PES 63/30-200 Z 60
Masch. Nr: 97 22978-1001 ident. No.: 1039276 year of construction 1997
Metal links width 200 mm
Distance follower bars approx. 300 mm
Length of the possible chip removal 900/1250 mm
Slot length 1000 mm
Shelf height 260 mm
Rack width 350 mm
Hopper width above 280 mm
Hopper width below 165 mm
Head – discharge height 800 mm
Belt speed 26 mm / sec. = 1.6 m / min.
Motor power belt drive 0.25 kW
Engine coolant pump 1.7 kW
H9fe0mjt...
5
General Location Bremen Condition used Other Flanges partly mild steel
Heat exchanger Technical documents Drawing,TÜV papers Exchange area 39,0 m² Last use Reflux cooler in an adhesive production Type plate
Shell space Volume shell space 300 liters Material shell AISI304 (V2A) 1.4301 Max. permissible operating overpressure shell space 6,0 bar Max. permissible operating temperature shell space 80 °C
Pipe chamber Volume of pipe chamber 410 liters Material of pipes AISI304 (V2A) 1.4541 Number of pi...
5
Heraeus heat and circulating air drying oven
Here we offer a Heraeus heating and circulating air drying oven.
Heraeus heating and circulating air drying oven up to 300°C
Manufacturer / Type: Heraeus UT 6060
Qmv9n
Features:
Temperature range: 300°C
Net volume: 52 liters
Weight (empty): 53kg
Inner dimensions: depth 403 mm width 340 mm height 380 mm
External dimensions: depth 744 mm width 535 mm height 552 mm
Rated voltage 230V, rated frequency 50/60Hz, rated current 6,8A, rated power 1,50kW
Includ...
3
Stainless steel, VA, chrome-nickel steel, material cuts, stainless steel, chrome steel, rust-free
-Material: cutting and manufacturing
-Round steel, tubes and sheets
-different materials: in stock
-Material numbers: 4301, 4541, 4571, 1.4828, 1.4876, 1.4841, 1.4878
-Please ask for the material you want with the dimensions.
Boehmcjdbb
-Price from: per kg and cut depends on material
3
Technical characteristics
Hm2bubk
ITALPRESSE MEC/B/4 plating press
Electrically heated Alu plates : 2300 x 1100mm
Opening 260mm
Mobile lower plate
4 hydraulic cylinders ⌀ 70mm
Specific pressure 1,5 kg/m2 on 2m2
Electrical power 7000 W / plate Power and Motors
Pluging: Three-phased Overall dimensions
9
Make: Allweiler AG
Type: NIT 32-200
Item condition: pump used, motor new, function guarantee
stock: 1
Available: immediately
delivery volume: 6 m³/h
delivery head: 42 m
Cbrgqzjqvr
revolutions: 2900
Impeller: 170 mm ø
Motor
Power: 2,2 KW
Voltage: 3 x 400 Volt
Revolutions: 2880 rpm
6
Heat exchanger, tube bundle heat exchanger FUNKE
Safety heat exchanger for system separation
Type SWF 301-6-B13-4
Serial No. 659839 Drawing No. 748 924 0850 Year of construction 2011
Max. operating pressure shell chamber 16 bar
Pipe chamber 10 bar
Safety chamber 16 bar
Volume of jacket chamber = 1.2 litres
Pipe chamber = 0,7 litres
Safety space = 0.3 litres
Temperature max. 100°C
Outer casing Ø 80 mm
- Leakage indication via ALCO pressure switch
- 2 pipe fittings on the jacket pi...
8
General Location Bremen Condition used Other Armaflex insulation slightly damagedScrews of the jacket closure plates are mostly missing (see photos).
Heat exchanger last use textile industry Type plate Year of construction 2000 Insulation available Insulation material Armaflex
Shell space Volume shell space 127 liters Material shell AISI316 (V4A) 1.4401 Max. perm. operating pressure shell space 10,0 bar Max. perm. operating temperature shell space 90 °C
Pipe chamber Volume of pipe chamber 78 lit...
7
Here we offer a Vötsch heating and drying cabinet.
Interior dimensions: width 600 mm height 900 mm depth 600 mm
External dimensions, max: width 1000 mm height 1973 mm depth 1145 mm
Volume: usable volume 0,324 m³
Nominal temperature 250°C
Nominal voltage 400V3(N)PE AC 50/60Hz
Ttpq39yp
Rated power: 7,2 kW Connected load: 8 kW Rated current: 12 A
Weight 305
Type: VTU 60/90
Condition: used / used
Scope of delivery: (see picture)
(Changes and errors in the technical data, specifications are reserved!...
10
Centrifugal fan, chip extraction fan, fan, suction, chip fan
-unfortunately no funding data available
-Motor: MEZ type 4AP80-2
-Motor power: 1.1 kW
-Speed: 2840 rpm
-Connection input: Ø 60 mm
-Outlet connection: Ø 400 mm
-Base: on castors
-Dimensions: 940/540/H1510 mm
-Weight: 74kg
Bl90geenxl
6
operating pressure: 10 bar
voltage: 400/50 V/Hz
control voltage: 24 V
total power requirement: 0,76 kw
weight of the machine approx.: 160 kg
space requirements of the machine approx.: 0,58x0,68x1,35 m
Tpsv9tou0
heat exchanger
application area: transportation of heat energy from a medium to another medium (liquid or gas)
connections 3/4" for flow/return 2x both sides
2 Pieces available
10
Make: Allweiler AG
Type: NIT40-200/170
Item condition: pump used, motor new, function guarantee
Stock: 1
Available: immediately
delivery volume: 6 m³/h
Qncqv
delivery head: 42 m
revolutions: 2900
Impeller: 170 mm ø
Motor
Power: 2,2 KW
Voltage: 3 x 400 Volt
Revolutions: 2890 rpm
6
Tipping container, tipping container for forklift truck
chip bucket - dump bucket - collapsible container
load capacity: ca.1000 kg
volume: 1 m³
drive-in handle: 230 x 110 mm
fork spacing inside/outside: 160/600 mm
- manual tilting device via hand lever
- 4 pcs. plastic fixed castors Ø 175 and, 2 pcs. steerable
- foldable drawbar
- drive-in handle/forklift pick-up
dead weight: 220 kg
length: 1700 mm
width: 1060 mm
height: 1500 mm
Chsgulke
good condition
Suitable for collecting, storing and trans...
9
General Location Bremen Condition used
Heat exchanger last use textile industry
shell space material shell AISI316 (V4A) 1.4571
Cbpiy3v3ol
technical data / dimensions diameter inside 170 mm total length 5.920 mm
2
used, great condition
Make Nestro
Type NE 200
Year of construction approx. 2000
vacuum
GS dust tested
CE-type tested
Motor 4.0 kW
Connection diameter 200 mm
Pressing pa. 2640
Air throughput 3200 m³ / h
Filling bins 2 pieces 600 mm x 600 mm x 600 mm
Filter cleaning pneum
Filter pressure monitor volume flow monitoring
New price approx. 10,000.00 EUR
Required space approx. 2350 mm x 900 mm x 2150 mm
Weight approx. 350 kg
Storage location 97447 Gerolzhofen, free on truck, unpacked
Handover in the ...
3
Fan heater, heater, gas heater, heat exchanger, air heater
-Power: 274 kW
-Volume flow 6.11 m³/s
-Motor power 10 kW
-Dimensions mm
-Weight kg
D8i7adp
12
Crane chip conveyor make KNOLL
type:400K-1/120 year 2009 with coolant pump
Tdr7cllb
in good condition.
Dimensions :
Neck length: 2600 mm
neck width: 490 mm
Neck height : 165 mm
Drop height : 1030 mm
Total height : 1330 mm
Total length : 3850 mm
Total width : 1400 mm
Weight.ca.500 Kg
1
Used Kleiser GmbH approximately 16sqmt horizontal shell and tube heat exchanger. Unit has (68) 316L stainless steel tubes approximately 3,000mm long x 25mm outside diameter, rated 6 bar design pressure at 100 deg.c. 316Ti stainless steel shell approximately 3,000mm long x 324mm diameter, rated 6 bar design pressure at 100 deg.c. (2) 316Ti stainless headers. Unit has 2 support mounts.
This heat exchanger is located at Perry Process Equipment Ltd UK site. It has recently been pressure tested on ...
6
Chip conveyor TSUBAKIMOTO Type D45W6ST-TN
Serial No. MF 8473 Year of construction approx. 1990
metal link width 140 mm
Behspghzav
metal link distance 380 mm
length of possible chip removal 900 mm
insertion length 1120 mm
insertion width 265 mm (without hopper)
insertion width 340 mm (with hopper)
insertion height 220 mm
Conveying height - ejection height approx. 550 mm
Belt speed 3 m/min.
Motor power belt drive 0,2 kW
Mains connection 400 Volt, 50 Hz
- Forward and reverse running of the scraper ...
8
General Location Bremen Condition used Other Armaflex insulation damaged (see photos)1 bearing saddle loose
Heat exchanger last use textile industry Type plate Year 2000 Insulation available Insulation material Armaflex
Shell space Volume shell space 127 liters Material shell AISI316 (V4A) 1.4401 Max. perm. operating pressure shell space 10.0 bar Max. perm. operating temperature shell space 90 °C
Qm3gf
Pipe chamber Volume of pipe chamber 78 liters Max. permissible operating temperature of pipe c...
6
Solid state relays, switchgear, switching components, solid state contactor
-Manufacturer: Siemens, Sirius solid state relays
-Type: 3RF2255-1AC45 3 pieces mounted on heat sink
Bossbd2peb
-Price: complete
-Dimensions: 200/95/H160 mm
-Weight: 2.7 kg
6
Flame heating device Roland Groß Söhne GmbHRing burner for heatingType 1 x 1" IonisationFabr. No. ALMA 01 Year of construction 03/2010Connection voltage: 230 VoltPe gas max.: 500 mbarPe air max.: 10 barVgas max.: 30 Nm3/hVluft max.: 300 Nm3/hIncluding 10 pieces of different flame ring nozzles - flame monitoring Hans Henning ring nozzle hinged out of 2 half shells, inside Ø 310 mm, with hose plug coupling and ignition device, air outlet front ring nozzle hinged out of 2 half shells, inside Ø 4...
5
General Location Bremen Condition used Other Power: 3679 kW
Vvnpom
Heat exchanger last use textile industry Type plate Year of construction 2003
Shell space Volume shell space 224 liters Material shell AISI316 (V4A) 1.4571 Max. permissible operating pressure shell space 8,0 bar Max. permissible operating temperature shell space 174 °C
Pipe space Volume of pipe space 94 liters Pipe length 980 mm Diameter of pipes 20 mm Max. permissible operating temperature of pipe space 140 °C Max. permissible o...
3
Heating burner, bitumen burner, flame device
Qkx7sky7t
-complete with hose and regulator
6
New, unused heat exchanger, plate heat exchanger SCHMIDT
serial no. 08V002004 year of construction 2008
Heat exchanger for system separation
Working pressure -1 to 20 bar
Buv2jwq7vd
Working temperature 5-300°C
Volume capacity room 1 4,19 litres
Volume room 2 4,46 litres
Flange size DN 50 (flange diameter 165 mm)
- for all liquids and vapours
- Screwed with 8 threaded bolts
Total width 335 mm
Total depth 370 mm
total height 790 mm
weight 205 kg
very good condition, from stock unused.
2
General condition used
I2kgvhure
Heat exchanger last Intended use Pharmacy Nameplate Material Insulating jacket Stainless steel
Shell chamber Volume shell chamber 4 liters Material shell AISI316 (V4A) 1.4571 Max. perm. operating temperature shell chamber 100 °C
Pipe chamber Volume of pipe chamber 3 liters Material of pipes AISI316 (V4A) 1.4435 Max. perm. operating temperature of pipe chamber 100 °C Max. perm. operating overpressure of pipe chamber 11.0 bar
Technical data / dimensions Total lengt...
4
Chip extraction, filter extraction, bag filter
Hhmohg8xg
-Drive: 0.96 kW
-Speed: 2800 rpm
-Connection: Ø 50 mm
-Connection: 380 V
-Dimensions: 780/470/H340 mm
-Weight: 135 kg
3
General Location Bremen Condition used Miscellaneous Pre-head made of 1.4571 (V4A); minor dents in insulation jacket
Barqa9zw
Heat exchanger last use brewery Type plate Year of construction 1987 Insulation available Material insulation jacket stainless steel
Shell space Volume of shell space 44.8 liters Max. permissible operating overpressure of shell space 3.0 bar Max. permissible operating temperature of shell space 142 °C
Pipe chamber Volume of pipe chamber 33.3 liters Max. perm. operating te...
5
Smoke and heat extraction system, control card, input card, control
Srk2u0
-Manufacturer: GEZE
-Type: flush-mounted E12 T2/1
-Dimensions: 350/330/H100 mm
-Weight: approx. 10 kg
3
General condition used Remarks 1 x pre-head gasket defective
heat exchanger technical documentation drawing exchange area 2,0 m² last use pharmaceutical year 2000 insulation available material insulation jacket stainless steel insulation material mineral wool
Shell space Volume shell space 27 liters Material shell AISI316 (V4A) 1.4571 Max. permissible operating overpressure shell space 6,0 bar Max. permissible operating temperature shell space 140 °C
B9nrqhacy8
Pipe chamber Volume of pipe chambe...