Used Chip Silo for sale (5,210)

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan -Manufacturer: Schuko, radial fan chip extraction fan type K 350 -Volume flow: 8584 m³/h Hnodpsv Rf Hljfx Abvsi -Total pressure: 4035 Pa -Engine: 15 kW 1460 rpm -Connection input: Ø 300 mm -Connection output: 250 x 400 mm -Base plate: 1000 x 340 mm -Fan wheel: Ø760 x 200 mm -Dimensions: 570/1000/H1470 mm -Weight: 381 kg

Condition: used, Collecting pan, floor pan, collecting container, floor element, steel flat pan, coolant liquid collecting pan, collecting pan grinding machine milling machine Hsdpfx Aoh Ic Nzebvsni -Collection pan: for chips with coolant liquid, 1045 x 745 mm -Bath height: 150 mm -Cut-out: 240 x 175 mm -Total dimensions: 1045/745/H150 mm -Weight: 12.1 kg

Condition: good (used), Radial fan, radial ventilator, radial blower, chip extraction fan, fan, extraction, chip blower, high-performance fan, metal chip extraction fan -Radial fan: metal chip extraction fan with wear plates Hnodpfsvt R Akox Abvsi -Engine: VEM K11R 160 MX2 -Engine power: 15 kW / 2920 rpm -Volume flow: m³/min / m³/h -Connection input: Ø 160 mm -Connection output: 150 x 130 mm -Base plate: 580 x 520 mm -Dimensions total: 990/810/H1055 mm -Weight: 365 kg.

Condition: new, axle configuration: 3 axles, loading space volume: 35 m³, total width: 2,550 mm, total height: 3,940 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Silo Trailer----Type: CM 35 Axles and Suspension: Disc brakes 22.5" SAF axle assemblies (3 x 9 t) with air suspension, axle spacing 2 x 1310 mm, lift and lower valve, loading pressure gauge on top of the tank, Wabco Smartboard, Wabco tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn. Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Ultra One aluminum rims size 11.75 x 22.5 ET 120. Brake System: EBS 4S/2M WABCO pneumatic brake system with RSS, compliant with standard 98/12/CE - ECE R13/09. Brake wear indicator connected. Landing Legs: Mechanical landing legs with two speeds, 2 x 20 t static load with swiveling foot. Electrical System: All lights LED version, 24-volt electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, yellow side marker lamps as required, rear position lamps, front outline markers, rear license plate lights, lights compliant with standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps mounted at the pivot height in aluminum brackets per 97/28/CE-2007/35/CE, 2 rotatable LED work lights on top left and right of the tank, yellow warning beacon at the rear at hose pipe height, 2x reversing lights on the underrun protection, 2x reversing lights at the leg height (each switchable on the power console) Tank Design: Horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-compartment tank, 35,000 L capacity. Tank warranty: 24 months from delivery. 2" kingpin as per standard 94/20/CE Operating Parameters: Pressure vessel in accordance with the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test overpressure 3.0 bar, operating overpressure 2.0 bar, operating temperature -40°C to +80°C. Filling options: 3 manholes DN 450 with swivel and foldable manhole covers. Covers close pressure-tight with 4 wing nuts each, support on top for cover storage, rain rail closed at the front, open at the rear. Material Discharge: 2 discharge cones with synthetic fabric agitator inserts, individual discharge lines DN 100 made of steel combined at the rear, 2 pinch valves DN 100 AKO in the lines, DN 100 shut-off ball valve with ring nozzle, remote control for shut-off ball valve and Storz A coupling at the end of the discharge line. Hnedpfx Abox Nuf Hevei Air Piping: 2.5” stainless steel air manifold mounted on the right-hand operator side, air line routed to the front, up to the end of the silo with check valve and DN 65 connection hose for compressor with Storz-B coupling. The air manifold has ball valves for upper air, additional air, and agitation air. Upper air 2” rear right, PRESSURE INLET REAR RIGHT, external air connection Storz C on the air line rear RIGHT, pneumatic connection with blow-off gun and spiral hose on the catwalk near the access ladder, 1 vibrator top of the tank, air line center-top on the catwalk for cleaning with air gun, air line bottom in storage box for cleaning with air gun. Ladders and Access: 1 aluminum ladder mounted rear left of the vehicle, 1 pneumatic aluminum safety scissor railing with locking system acting on the brake, 1 aluminum safety walkway

Condition: new, loading space volume: 60 m³, total width: 2,550 mm, total height: 3,930 mm, Year of construction: 2026, Equipment: ABS, OMEPS Tipping Silo Semi-Trailer ---- Model: CR 60 Chassis: Two fully automatically welded I-section longitudinal beams with welded cross members, chassis width 1,400 mm, 2" kingpin, tipping cylinder: Hyva Axles and suspension: 22.5" disc brake SAF axle units, 3 x 9 t with air suspension, axle spacing 2 x 1,310 mm, raise/lower valve, loading manometer mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring, first axle liftable (not equipped for tractor unit), third axle liftable with Wabco Optiturn Wheels and tires: 6 wheels with tires size 385/65 R22.5, as per manufacturer’s specification on Alcoa Dura Bright aluminum rims 11.75x22.5 ET 120 Braking system: EBS 4S/2M WABCO compressed air braking system with RSS, compliant with standard 98/12/CE - ECE R13/09, brake wear indicator connected Landing gear: Mechanical landing legs with two speeds, 2 x 20 t static load with swivel foot, rear support with crank stands Electrical system: All lights in LED version, 24 Volt electrical system consisting of: one 15-pin socket mounted in front of the fifth wheel on the chassis carrier, amber side marker lamps as required, rear position lights, front marker lights, rear license plate lights, lamps according to standard 97/28/CE-2007/35/CE, 2 multi-chamber rear lamps fitted at swivel joint height in aluminum holders in accordance with standard 97/28/CE-2007/35/CE, 1 LED work lamp on the tank, yellow warning beacon at rear at hose tube height, 2x reverse lamps in underrun protection, 2x reverse lamps at the level of the support legs (each switchable at the power console) Tank design: A horizontal tank made from aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). One-compartment tank, 60,000 liters capacity. Tank warranty: 24 months from delivery. Operating parameters: Pressure vessel according to the Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar, operating pressure 2.0 bar, operating temperature -40° to +80° C. Filling options: Hnjdpfjx Nuf Tjx Abvji 5 manholes DN 450 with hinged and folding dome covers. Each dome cover is pressure-tight sealed with 4 wing nuts, rubber support for dome cover on top for storage, rain gutter closed at the front and open at the rear Material discharge: 1 material outlet cone DN 800 made of INOX, foldable with INOX disc for aeration, material outlet cone swivels laterally, DN 150 shut-off valve with white gasket, connection: STORZ-A Air piping: A 2.5" stainless steel air manifold line mounted on the operating side RIGHT, a 4" stainless steel air distribution tube is mounted at the rear of the tank, air valves (butterfly valves) in stainless steel, top air hose and air connection hoses are 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1 m in front of the swivel bearing Ladder and walkway: 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety railing can be erected from below using a separate fold-up ladder piece and a parking brake when opened, 1 aluminum safety grating runs along the top left side of the tank, anti-slip coating on the tank Discharge hose storage: 4 hose tube containers 5 m long DN 200 made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum...

Condition: new, total width: 2,550 mm, total height: 3,960 mm, Year of construction: 2026, Equipment: ABS, O.ME.P.S Tipping Silo Trailer—Type: CR 47 Chassis: Two fully automatically welded I-shaped longitudinal beams with welded cross members, chassis width 1,400 mm, 2" king pin, tipping cylinder: Hyva Axles and Suspension: 22.5" disc brakes, 3x 9t SAF axle units with air suspension, axle spacing of 2 x 1310 mm, lift and lower valve, loading pressure gauge mounted on top of the tank, Wabco Smartboard, Wabco TPMS tire pressure monitoring system, 1st axle liftable without tractor unit equipment, 3rd axle liftable with Wabco Optiturn Wheels and Tires: 6 wheels with 385/65 R22.5 tires, manufacturer’s choice on Alcoa Dura Bright aluminum rims, size 11.75x22.5 ET 120 Brake System: EBS 4S/2M WABCO compressed air brake system with RSS, according to standard 98/12/CE – ECE R13/09, connected brake wear indicator Landing Gear: Mechanical landing legs with two speeds, 2x 20t support load with pivoting foot, rear without landing support Electrical System: All lights are LED, 24 V electrical installation consisting of: one 15-pin socket mounted in front of the fifth wheel plate on the chassis beam, required number of yellow side marker lights, rear position lights, front marker lights, rear license plate lights, lights according to standard 97/28/CE-2007/35/CE, two multifunction rear lights mounted at the pivot height in aluminum brackets according to standard 97/28/CE-2007/35/CE, one LED work light on the tank, yellow warning beacon at the rear, mounted at hose pipe height, 2x reverse lights in underrun protection, 2x reverse lights at landing leg height (each switchable on the power console) Tank Version: A horizontal tank made of aluminum alloy (AW5083 Peraluman 45 AlMg 4.5 Mn). Single-chamber tank, 47,000 liter capacity, tank warranty: 24 months from delivery. Operating parameters: pressure vessel according to Pressure Equipment Directive PED 97/23/CE. Wall thickness approx. 5 mm, test pressure 3.0 bar – operating pressure 2.0 bar, operating temperature -40° to +80°C Filling Options: 4 manholes DN 450 with swing and hinged dome covers. The dome covers are sealed pressure-tight with 4 wing nuts each, rubber supports on top for dome covers, drip rail closed at the front, open at the rear Material Discharge: 1 material discharge cone DN 800 made of stainless steel, folding with stainless steel agitator disc, material discharge cone can swing sideways, shut-off valve DN 150 with white gasket, connection: STORZ-A Air Piping: A 2.5'' stainless steel main air line mounted right side operations, one 4" stainless steel air distributor pipe mounted at the rear of the tank, air valves (shut-off flaps) in INOX, upper air hose and air connection hoses are in 2" STORZ couplings, micron filter, vacuum valve on top of the tank, 1x vibrator 1m in front of the pivot Ladder and Walkway: Hsdpfsx Nufmsx Abvjni 1 aluminum ladder mounted at the rear left of the vehicle, 1 aluminum safety scissor guardrail, can be raised with a separate fold-out ladder section from below with parking brake when open, 1 aluminum safety walkway runs along the top left of the tank, anti-slip coating on the tank Delivery Hose Compartment: 4 hose tube containers 5 m long, DN 200, made of aluminum with 4 hoses DN 100 and STORZ couplings, hose container with compressor hose D.76 Accessories: The side underrun protection is made of anodized aluminum, left side

Condition: good (used), We are selling 3 silo containers as shown in the photos. Hodpjyl Ur Dsfx Abvoni

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 18.5 kW -Speed: - rpm -Volume flow rate: approx. 7000 m³/h -Total pressure: approx. 2800 Pa -Inlet connection: Ø 280 mm -Outlet connection: Ø 350 mm -Dimensions: 1120/840/H930 mm -Weight: 284 kg Hnodpob Ilw Tsfx Abvoi

Condition: good (used), Radial fan, chip extraction blower, fan, extraction, chip blower -Engine power: 37 kW -Speed: 1470 rpm -Volume flow: unfortunately not visible -Total pressure: - da Pa -Inlet connection: Ø 700 mm -Outlet connection: Ø 700 mm -Dimensions: 1750/1700/H2460 mm Hnjdjb Iqf Nopfx Abvji -Weight: 900 kg

Condition: used, Technical data / dimensions Available quantity: 2 Volume: approx. 110,000 liters Container type: silo Condition: used Food safe: no Design: upright Hsdpfxsv Avtts Abvoni Internal diameter: approx. 3,000 mm Cylindrical height: approx. 15,600 mm Total height: approx. 18,000 mm Weight: approx. 2700 kg Specific weight of the medium: 0.6 to/m³ Operating pressure: pressureless Ground clearance: approx. 1,000 mm Material / properties Inner casing material: aluminum Notes: Material: AlMg3 / AlMgSi Equipment The mixing tube installed in the middle of the container cylinder ensures smooth mixing of the stored medium Stand shape: foot ring / stand frame Fastening: fixed Top base type: conical base Slope: approx. 15 % Bottom type: cone Cone inclination: 90 degrees Top floor: 1 x roof edge railing, height: 1,200 mm 2 x crane eye 1 x flange connection DN 80 (filling) 1 x flange connection for silo pilot 1 x vent 1 x agitator for mixer Various connections for measurement and control technology Case: 1 x operating room door (approx. 1,800 x 850 mm) 1 x cable protection pipe 1 x filling line DN 80 8 x pipe holder Bottom floor: The silos end at the bottom in a 90° cone with flange

Condition: used, For powder or liquid d. 1800 Height on photos Drain diameter 215 mm Hnsdpfx Abox S Ry Eovoi Flange diameter 340 / 8 holes on d.290 Off-centre conical bottom 4 feet on gussets

Year of construction: 1983, condition: ready for operation (used), Various mixing and storage silos are available. 1) Stainless steel silo. 2) Stainless steel silo Zeppelin, year of construction: 1983, capacity: 32m³, friction angle range: 25°-45°, overpressure range: 5mbar-45mbar, max operating temperature: 50°C, bulk density: 0.6kg/dm³, silo height: 11250mm, silo diameter: 3000mm. 3) Stainless steel silo. 4) 3x identical HD-PE mixing silos, total height: approx. 10500mm, diameter: 3000mm, volume: approx. 49.5m³, mixing pipes: NW 150, motor power: 15kW. 5) 2x identical storage silos Zeppelin, year of construction: 1980, volume: 127m³, capacity: 119m³, silo diameter: 3500mm, inclination angle: 15°, hopper height: 1680mm, support ring height: 3700mm, total height: 17500mm. Documentation available. An on-site inspection is possible. Individual sale possible. Hsdpfx Abjxxl I Ujvoni

Year of construction: 2009, condition: ready for operation (used), A Cepi flour silo is available. Containers: 2. Container capacity 1: 4000kg, container capacity 2: 4500kg. Including electrical control and weighing hopper. Documentation available. An on-site inspection is possible. Hjdpfx Aex Iviwjbveni

Year of construction: 2021, condition: ready for operation (used), A silo system consisting of 3 storage silos, 1 weighing silo and conveying units is available. Material: PE/PP/PS/ABS/LDPE/HDPE/MDPE, storage silo volume: 32.6m³, weighing silo volume: 13.8m³. Storage silo capacity at 0.2t/m³: 6500kg, weighing silo capacity at 0.2t/m³: 2800kg. Storage silo dimensions X/Y/Z: 4200mm/4200mm/4200mm, weighing silo dimensions X/Y/Z: 3000mm/3000mm/3400mm, control: Siemens S7. Including steel frames, gate valves, full and demand indicators, filter bags, filling line, conveying and dosing system, rotary valves and gate valves. Documentation available. On-site inspection is possible. Hnsdpfxov Ip Ste Abvei

Year of construction: 1986, condition: ready for operation (used), Volume: 29000m³, content: 29m³/l. Hnedpfsuantnsx Abvji

Year of construction: 2009, condition: ready for operation (used), A total of 24 silos are available. 2x silo, diameter: 3000mm, height: 9500mm, usable volume: 50m³. 2x silo, diameter: 3000mm, height: 9500mm, usable volume: 65m³. 8x silo, diameter: 3000mm, height: 10500mm, usable volume: 65m³. 1x silo, diameter: 3000mm, height: 10500mm, usable volume: 50m³. 1x silo, diameter: 3000mm, height: 10500mm, usable volume: 35m³. 3x silo, diameter: 3000mm, height: 6500mm, usable volume: 40m³. 1x silo, diameter: 2865mm, height: 6500mm, usable volume: 33m³. 2x silo, diameter: 2400mm, height: 6550mm, usable volume: 27.5m³. 1x silo, diameter: 3500mm, height: 10000mm, usable volume: 90m³. 2x silo, diameter: 3200mm, height: 9300mm, usable volume: 65m³. 1x silo, diameter: 4500mm, height: 10500mm, usable volume: 120m³. Documentation available. On-site inspection is possible. Hsdouml T Tjpfx Abvoni

Condition: excellent (used), functionality: fully functional, Aluminum silos ELLIMETAL SILOBOUW Hjdjyc Nzbopfx Abvsni Year of construction: 1988 Diameter: 3966 mm Silo height: 10,914 mm Including balustrade: 11,627 mm Manufactured for polypropylene granules Capacity: 100 m³ - 50 tons

Condition: excellent (used), functionality: fully functional, nominal flow rate: 30,000 m³/h, Silo for dust collection and filter unit for dusty air. Dust storage: 30 m³. Air filtration: air flow rate 30,000 m³/h. Extraction fan: 45 kW. Electrical control panel. Hedex Tcfvjpfx Abvjni

Condition: used, empty load weight: 7,900 kg, maximum load weight: 26,100 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 12/1986, loading space volume: 53 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axle, BPW axles, air-suspended, lifting+lowering, ABS (anti-lock braking system), walkway, U-protection, rear support, aluminum side bumpers, supports, storage box Hsdpevhk Iijfx Abvsni Body: Tipping silo trailer approx. 53m³ ACCESSORY INFORMATION WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! - .

Condition: used, empty load weight: 7,070 kg, maximum load weight: 26,930 kg, overall weight: 34,000 kg, axle configuration: 3 axles, first registration: 07/1996, loading space volume: 55 m³, suspension: air, tire size: 385/65R22.5, color: white, mileage: 1,001 km, gearing type: other, driver cabin: other, Equipment: ABS, Vehicle location: Bovenden, 3-axles, BPW axles, air-suspended, lifting+lowering, ABS (anti-lock braking system), walkway, U-protection, lateral aluminum wheel guards, supports Body: Silo trailer with 4 compartments approx. 55m³ 3x 8t BPW axles! Hose holder on both sides! Good condition! ACCESSORIES WITHOUT WARRANTY, subject to alterations, prior sale and errors excepted! Hedpfxovhh Rne Abvjni - .

Condition: excellent (used), functionality: fully functional, Aluminum flour silo with extended base ring (used), designed for a bulk density of 0.8 kg/dm³ Volume: 56,000 liters Available units: 1 Diameter: approx. 2,400 mm Cylindrical height: approx. 15,000 mm Total height: approx. 16,500 mm (incl. roof perimeter safety railing) Material: AlMg3 Bulk density: 0.8 kg/dm³ Equipment and connections: Top head: - 1 x pressure/vacuum relief valve - 1 x venting filter add-on - 1 x flange for filling pipe - 1 x flange for level measurement - 1 x flange for pressure transducer - 1 x flange for level indicator - 1 x roof perimeter safety railing with handrail - 2 x lifting lugs Silo shell: Hnedpfx Abjyhznzevsi - 1 x access door 850 x 1800 mm - 8 x pipe brackets ø 108 mm for filling pipe - 1 x filling pipe DN 100, ending at TW connection at the bottom - 1 x cable protection pipe DN 50 - Various pipe penetrations in the area of the lower base ring The silo features a 40° conical bottom, terminating in a DN 1500 flange for fitting a vibrating floor. At the bottom/cone: - 1 x block flange for empty indicator - 1 x vibrating floor The currently installed measuring and control technology is included in the above offer, but no guarantee is given for its functionality! Otherwise, as per images and drawing.

Year of construction: 1998, condition: excellent (used), functionality: fully functional, Flour silo / sugar silo made of aluminum with extended support skirt (used), designed for a bulk density of 0.95 kg/dm³ Capacity: 70,000 liters Available quantity: 4 Diameter: approx. 2,400 mm Cylindrical height: approx. 17,500 mm Total height: approx. 19,200 mm (including roof edge railing) Material: AlMg3 Bulk density: 1.0 kg/dm³ Hnodpfxjyhzm Rj Abvoi Features and connections: Top (roof): - 1 x manhole DN 600 with cover - 1 x pressure/vacuum relief valve - 1 x vent filter attachment (ø 1000 x 5 mm) - 1 x flange DN 125 for fill pipe - 1 x flange DN 50 for pressure transmitter - 1 x roof edge railing with handrail - 2 x crane lifting lugs Shell (side wall): - 1 x bursting disc fitting (approx. 920 x 586 mm) - 1 x access door 850 x 1800 mm - 8 x pipe clamps ø 108 mm for fill pipe - 1 x DN 100 fill pipe, terminating at the bottom in a TW connection - 1 x cable protection pipe DN 50 - 1 x block flange for level sensor - Various pipe passages in the lower support skirt area The silo features a 40° discharge cone at the bottom, ending in a DN 1500 flange for mounting a vibrating base. At the bottom/cone: - 1 x vibrating discharge base VB 1400 with motor, manufacturer AZO - 1 x block flange for empty detector The currently installed control and measurement technology is included in the above offer, but no warranty is given for its functionality. Otherwise, as per pictures and drawings.

Condition: new, Year of construction: 2026, functionality: fully functional, CORMAK FM230A Wood Chip and Dust Extractor + 2.5 m Hose The CORMAK FM230A dust extractor is a high-performance chip extraction fan designed for efficient removal of wood chips, shavings, and wood dust generated during woodworking processes. This compact chip extractor is ideal for carpentry workshops, production facilities, and home workshops where effective dust extraction from workstations is essential. The model is equipped with a flexible extraction hose with a length of 2.5 m, allowing quick connection to woodworking machines such as planers, table saws, milling machines, and thickness planers. Thanks to this, the chip extraction system can be easily positioned anywhere in the workshop, ensuring effective removal of dust and chips directly from the source. The powerful extraction fan generates an airflow of up to 1080 m³/h, ensuring fast and efficient suction of wood chips and dust. The solid construction and metal impeller provide stable operation, high durability, and reliability even during intensive use in a woodworking workshop. The mobile design with transport wheels allows convenient movement of the unit between workstations, while the bag filtration system effectively separates air from wood chips. As a result, the wood dust extraction system helps maintain cleanliness in the workshop and improves both comfort and workplace safety. Key Advantages extraction hose included – 2.5 m Ø100 mm high suction capacity – up to 1080 m³/h efficient fan for chips and wood shavings single-phase motor 0.75 kW / 230 V durable metal impeller Hnedpfx Abeytn Tdsvji mobile construction with transport wheels efficient filtration system for chips and wood dust large waste bag enabling long operating time compact design ideal for woodworking workshops Applications The CORMAK FM230A chip and dust extractor is designed to work with many woodworking machines that require effective dust extraction: jointers and planers thickness planers table saws spindle moulders wood sanders Thanks to the high airflow performance, the dust and chip extractor effectively removes contaminants generated during woodworking, improving visibility at the workstation and reducing the amount of dust in the air. Standard Equipment CORMAK FM230A dust extractor extraction hose Ø100 mm – 2.5 m filter bag waste collection bag mounting clamps mobile base with wheels Technical Specifications Parameter Value Motor power 0.75 kW Power supply 230 V / 50 Hz Extraction capacity 1080 m³/h Motor speed 2800 rpm Vacuum pressure 1000 Pa Noise level 68 dB Number of bags 2 Suction inlet diameter 100 mm Hose length 2.5 m Bag capacity 90 L Height 1800 mm Width 750 mm Length 450 mm Weight 27 kg

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 0208447/TN138, tank capacity: 22,000 l, Equipment: compressor, - Tropper roll-off silo with functioning scale, see attached photo - Used - The structure is still in daily operation - Sale due to new acquisition Hnsdpfeymw T Tsx Abvsi - The silo is suitable for pellets, feed, bulk goods, etc. - On-site inspection possible at any time

Condition: used, overall weight: 39,000 kg, axle configuration: 3 axles, first registration: 10/2004, next inspection (TÜV): 01/2024, * BPW axles * Disc brakes * 5x dome covers * Folding guardrail * Additional rear supports Hodjq A E D Nspfx Abvjni * Unladen weight: 7,020 kg ----Internal vehicle number: 8512-----Subject to errors and prior sale. WhatsApp support available! If you have any questions about the vehicle or require further information, feel free to contact us easily via WhatsApp. WhatsApp WhatsApp