Used Chiron Fz 12 W Magnum High Speed for sale (88)

Condition: good (used), Year of construction: 2007, functionality: fully functional, Vertical CNC Machining Center Chiron FZ OSK S Magnum SK with NC swivel head, rotary table package, bar feeder, and discharge unit Year of manufacture: 2007, Factory overhaul in 2017 Operating hours approx. 22,500 h Technical data: Siemens 840D (PCU 20 / NCU 572.4) NC swivel head, swivel range -20° / +115°, water-cooled motor spindle, 15,000 rpm. Axes travel X 450mm / Y 270mm / Z 310mm Rapid traverse in X / Y / Z: 75 m/min. / Acceleration: X 1g / Y 1.5g / Z 2g 40 tool stations HSK-A 40, chip-to-chip time 2.6 sec. (vertical, to DIN standard) Additional equipment: Preparation for bar machining Rotary table package AWU 160 with D105mm (positioning axis), Hainbuch Spanntop collet chuck D100, additional equipment for 6th side machining Part removal handling and discharge unit for finished parts, bar loader IRCO SiMag 100.1-3000 (for round and profile material) Coolant gun, machine prep for high-pressure ICS 70 bar (vario-valve), fixture flushing Scraper-belt chip conveyor with discharge height 1050 mm, vacuum rotation filter VRF 400 ltr., manufacturer KNOLL MAHLE dual change-over filter Electrical cabinet cooler, signal light Tool life monitoring, tool breakage control, Single F500 3D probing system, Renishaw TS27R Brankamp Marposs collision monitoring CMS 100 Accessories: Breuning IRCO guide channel sets and Hainbuch collets (as per agreement) HSK-A40 tool holders Spare parts for this machine type including special operating materials Note on machine concept: Unmanned complete machining 24/7 of cubic components. Material supply via bar loader D100 / 3000 mm for round and profile material. Rotary table as positioning axis and machining of 4 surrounding faces via vertical milling spindle. Machining of the end face (5th side) horizontally with swivel head. Clamping of workpiece via clamping stock, separating workpiece and 180-degree rotation, machining of the 6th side again horizontally with swivel head. Removal handling and discharge unit into parts buffer. Note on machine condition: The machine was factory overhauled and technically updated in 2017 by Chiron (CMS). The last spindle replacement was carried out in September 2025. The last manufacturer service was in October 2025 (major annual maintenance, 4,000 h). Gjdpfeypbmcsx Afpeiu From new until today, the machine has been continuously maintained, repaired, and kept up-to-date by the manufacturer through a full-service contract (preventive maintenance).

Condition: used, Year of construction: 2002, functionality: fully functional, machine/vehicle number: 213-65, Verfahrweg X-Achse: 300 mm Verfahrweg Y-Achse: 250 mm Verfahrweg Z-Achse: 250 mm Werkstückgewicht (max.):1 kg Anzahl der Werkzeugplätze：12 Pos Steuerungshersteller:Fanuc Gijdpfx Asywmziefpju Steuerungsmodell: 21m 3x / 2x 21iM Kühlmittelzufuhr:1 bar Anzahl der Spindeln:1 Eilgang Z-Achse: 60 m/min Eilgang X-Achse: 40 m/min Eilgang Y-Achse: 40 m/min Drehzahl (max.): 10.000 U/min Werkstückdurchmesser (max.): 63 mm 4.Achse Peiseler AWU P100 die Maschinen wurden 2016 durch Chiron CMS überholt Ausstattung: Dokumentation/Handbuch, Drehzahl stufenlos einstellbar Die Maschine befindet sich unserer Einschätzung nach in einem guten gebrauchten Zustand und kann nach Terminvereinbarung unter Strom besichtigt werden.

Condition: ready for operation (used), Year of construction: 1997, functionality: fully functional, machine/vehicle number: 194-03, travel distance X-axis: 2,000 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 425 mm, table width: 450 mm, table length: 2,280 mm, TECHNICAL DETAILS Travel X-axis: 2,000 mm Travel Y-axis: 400 mm Travel Z-axis: 425 mm Total number of axes: 3 Table length: 2,280 mm Table width: 450 mm Number of T-slots: 3 T-slot spacing: 150 mm T-slot width: 18 mm Spindle speed: 10,500 rpm Number of tools: 20 Tool diameter: 65 mm Diameter with free adjacent slots: 180 mm Max. tool length: 220 mm Max. tool weight: 8 kg MACHINE DETAILS Control: SIEMENS SINUMERIK 810 M Connection: 50 Hz 3x 400 Volt Spindle motor: 18 kW Total power requirement: 31 kVA Dimensions & Weight Dimensions (L x W x H): 4,000 x 3,010 x 3,040 mm Machine weight approx.: 7,200 kg EQUIPMENT Giodeyhnfcepfx Afpou Coolant system Chip conveyor Electronic handwheel

Condition: repair required (used), Year of construction: 2001, functionality: limited functionality, travel distance X-axis: 2,000 mm, travel distance Y-axis: 450 mm, nominal power (apparent): 37 kVA, controller manufacturer: Sinumerik 840 D, overall weight: 7,000 kg, spindle speed (min.): 10,000 rpm, Equipment: chip conveyor, - SK 40 tool holder - The machine is currently idle. Gedpfx Afjywpa Iepsiu - The buffer battery is empty, which has caused the connection to the PLC to be interrupted. The machine can be inspected under power at any time.

Condition: ready for operation (used), Year of construction: 2005, A machining center is available. Travel X/Y/Z: 550mm/400mm/425mm, A-axis: +/-100°, rapid traverse: 40m/min, speed: 10500rpm, tool positions: 20, tool holder: SK40, table load: 300kg, control: Siemens Sinumerik. The screen of the machine is defective. Documentation available. On-site inspection is possible. Giedswxfa Hspfx Afpou

Year of construction: 1988, condition: ready for operation (used), Verfahrweg X/Y/Z: ca. 1600mm/400mm/425mm, Tischdimensionen X/Y: 1500mm/400mm, Werkzeugaufnahme: SK40, Werkzeugplätze: 20, Spindeldrehzahl: 5000U/min, Maschinendimensionen X/Y/Z: ca. 4000mm/2500mm/2900mm, Gewicht: ca. 7000kg, Steuerung: Siemens Sinumerik System 3, Betriebsstunden: ca. 19855h. Inklusive ca. 12 Werkzeughalter. Documentation available. Eine Besichtigung vor Ort ist möglich. Gsdpfx Ajwaa Inefpjiu

Condition: excellent (used), Year of construction: 2006, HEIDENHAIN iTNC 530 control Working travels 550 x 400 x 360 mm Spindle taper HSK 63 Spindle speeds -20'000 rpm Tool magazine with 48 Pos. Swivel rotary table with B- + C-axis Roboter for workpiece loading EROWA ERS 3D-measuring tracer Gisdpfex R Uxpex Afpou Misc. accessories MARCELS MASCHINEN CH

Condition: used, TECHNICAL DETAILS - Number of axes : 7 MILLING SPINDLE - Tool holder type : HSK40 - Spindle speeds : 30.000 [rpm] LINEAR AXES - Travels on X/Y/Z axes : 450 x 270 x 310 [mm] - Rapid traverses rates (X/Y/Z) : 75 [m/min] B ROTARY AXIS - Travel : -20/+115 [°] - Indexing precision : 0,001 [°] TOOL CHANGER - Auto. Tool Changer type : Parapluie - Tool magazine capacity : 20 A ROTARY AXIS - Max. bar diameter : 32 [mm] - Indexing precision : 0,001 [°] - Travel : 360 [°] POWER SUPPLY Gjdpouhbtqefx Afpoiu - Supply voltage : 400 [V] - Total installed power : 17 [kVA] WEIGHT & DIMENSIONS - Machine floor space : 1.500 x 2.600 [mm] - Machine height : 2.300 [mm] - Machine weight : 5.100 [kg] MACHINE HOURS - Number of working hours : 20.749 [h] EQUIPMENT - CNC : Fanuc 31i-A5 - Interface : USB, PCMCIA, RJ45 - Fire extinguisher * : KRAFT&BAUER FB703 * NB : working order not guaranteed. To have it checked by a qualified organization of the buyer. - Coolant tank - Spindle cooling unit - Oil mist extractor : HIFI FILTER - Tool probe : Renishaw TS27R - Workpiece probe : Renishaw OMP40 - Unit for 6th face machining - Collet chuck : ORTLIEB KSF 30-50 - Tool recognition through RFID scanning : BALLUFF BIS C-650 - Tool-holders : 30

Year of construction: 2006, operating hours: 82,068 h, condition: good (used), functionality: fully functional, machine/vehicle number: 258-22, Moving column machine in steel-concrete composite construction with workpiece changing device. Low-maintenance model from the world-renowned manufacturer CHIRON. Double spindle - vertical - machining center incl. chip conveyor KNOLL AE 1058.009 and a compound unit (already dismantled). Prescribed maintenance intervals for plant and plant parts have always been observed. TECHNICAL DETAILS Drilling capacity in steel: 60: 2 x 6 36 mm (with insert drill) Guides: with long term grease lubrication speed range: 20-12.000 rpm CNC control: SIEMENS 840D spindle distance in X-axis: 250 mm X-axis: 300 mm Y-axis: 400 mm Z-axis: 425 mm (with variable tool change plane) rapid traverse speed 60 m/min in X-, Y- and Z-axis Main spindle drive: 1 piece with 2 AC motors power at 100 % ED: 9,5 kW power at 15 % ED:14,0 kW Drive: digital direct drives with indirect absolute path measuring system (no reference point approach) tool places: 212 Tool diameter: max. 65 mm Tool diameter with free neighboring places: max. 175 mm Tool weight: max. 2.5 kg (5.0 kg at 2 stations) Tool change time: approx. 0.9 s (depending on control) Chip-to-chip time: approx. 2.1 s (control-dependent) Workpiece changing device: 0 / 180 Tool holder: HSK A 63 1 MACHINE DETAILS type of current: 3 / N / PE - 50/60 Hz operating voltage: 400 V power: 44 kVA rated current: 63 A Coolant system HL 450 / 900 LATE CONVEYOR Manufacturer: KNOLL Type: AE 1058.009 Year of manufacture: 2006 EQUIPMENT - CHIRON maintenance manual on screen - Operating hours and piece counter - Socket 230 V - Socket for portable mini handwheel - Control cabinet cooler as door-mounted unit - Signal lamp - splash guard cladding - chip conveyor - mini control panel - Rinsing gun - Central pneumatic connection - Fixture flushing - 70 bar HP pump - 1 internal cooling package with suction unit - Fully enclosed working chamber - Extraction unit with air cleaner - Extraction capacity 800 m³/h - CHIRON mold life monitoring with: - Automatic loading door of the splash guard Gisdpfx Afsmt A Ivspju - "opening" and "closing", actuation via two-hand start release - Integrated IWW 0/180° workpiece changing device - Chiron Lasercontrol Single F500 - Ethernet connection RJ45 at the control cabinet instead of in the control panel - Pneumatic and hydraulic connections - Central hydraulic and pneumatic connection prepared for max. 20 connections, 6 connections are designed including connection couplings, 4 of them for hydraulics, max. 210 bar and 2 for uncontrolled pneumatics. - 4 Additional hydraulic connection(s) - Hydraulic power unit - 2 Hydraulic aggregate extension for further clamping circuits

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-89, Technical characteristics: - Machining workspace: X 550 mm; Y 400 mm; Z 360 mm - Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary divider head axes B, equipped with direct angular measuring system, max rotation speed 50 rpm, accuracy +/- 5" - Axis A swivel range: +/- 110° - Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg - Rapid traverse rate: X/Y/Z 40/40/40 m/min - Distance between divider heads B1/B2: 250 mm - Spindle speed: 1–10,000 rpm - Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) - Automatic tool changer: 1x48 positions / chip-to-chip average 2.5 sec - Max. tool diameter: 82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical specifications: - Supply voltage: 3x400V/50Hz - Installed power: approx. 45 kVA / 80A Dimensions: Gsdpfoxxi Rmex Afpeiu - Installation space: approx. 4.4 x 2.3 x 3.1 m - Weight: approx. 8,500 kg Equipment includes: - CNC control: Siemens 840D Power Line - Chip conveyor: Spring Knoll - Oil cooling system - High-pressure oil filtration system (max. 80 bar): Knoll HL 450/1200 - Shaft cooling system, guideways and control cabinet - 2 oil lubrication units - Oil mist extraction/recovery: LTA - Fire protection: Kraft & Bauer - Part presence P/Y detection: with low-pressure air sensors - In-process inspection: Marposs T25 - Tool holder presence detection in spindle - Documentation: incomplete Machine status: NOT OPERATIONAL: Hydraulic power unit motor burned out.

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-06, Technical Specifications: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + 1 rotary axis (rotary table A) and 2 rotary axes (B, indexer head) with direct angular measuring system, maximum 50 rpm, accuracy +/- 5 seconds # A axis swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1–10,000 rpm # Spindle taper: DIN69893-HSK-A63 (with internal coolant) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max tool diameter: Ø82 mm / max. length 250 mm / 5 kg Electrical connection: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation area: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Powerline # Chip conveyor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, max. 80 bar: Knoll HL 450/1200 # Shaft, guideways, and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery: LTA AC3002 Gedpfsxxivcsx Afpoiu # Fire protection: Kraft & Bauer # Presence detection: with low pressure air sensors (part present) # In-process control: Marposs T25 # Tool breakage monitoring: Blum Novotech # Tool presence detection system in spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Cover for tool magazine # Tool magazine presence sensor (BERU)

Condition: repair required (used), Year of construction: 2007, functionality: not functional, machine/vehicle number: 191-88, Technical specifications: # Working area: X 550 mm; Y 400 mm; Z 360 mm # Axis configuration: 3 linear axes (X, Y, Z) + 1 rotary table axis A and 2 rotary axes B with indexing head, direct angular measuring system, max. speed 50 rpm, accuracy +/- 5" # A-axis swivel: +/-110˚ # Max. clamping/part size: Ø247 x 830 mm; max. weight 360 kg # Rapid traverse rate: X/Y/Z 40/40/40 m/min # Distance between dividing heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools, tool-to-tool average 2.5 sec # Max. tool diameter: Ø82 mm / max. tool length: 250 mm / max. tool weight: 5 kg Electrical system: # Voltage: 3x400V/50Hz # Installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment includes: # CNC control: Siemens 840D Power Line Gedpfxexw Uple Afpjiu # Chip conveyor: Spring Knoll # Oil cooling unit # Oil filtration system up to 80 bar: Knoll HL 450/1200 # Shaft, linear guide and electrical cabinet cooling system # 2 oil lubrication systems # Oil mist extraction/recovery unit: LTA AC3002 # Fire suppression: Kraft & Bauer # Part presence check with low-pressure air sensors # In-process control: Marposs T25 # Tool support monitoring system at spindle # Documentation: incomplete Machine condition: NOT OPERATIONAL # Operator protection screen damaged – operator panel functional # Tool magazine chain # Ballbar X # Ballbar Y # Pullbar spindle # Axis drive power supply X # Axis drive power supply Y # Main drive power supply # Complete hydraulic unit defective

Condition: repair required (used), Year of construction: 2009, functionality: not functional, machine/vehicle number: 281-09, Technical Characteristics: # Machining Workspace: X 550 mm; Y 400 mm; Z 360 mm # Axis Description: 3 linear axes (X, Y, Z) + rotary table axis A and 2 rotary axes B, equipped with an index divider head with direct angular measuring system, max. rotation speed 50 min⁻¹, accuracy +/- 5" # Axis A swivel: +/-110˚ # Max. clamping/part dimensions: Ø 247 x 830 mm; max. weight 360 kg # Rapid traverse: X/Y/Z 40/40/40 m/min # Distance between divider heads B1/B2: 250 mm # Spindle speed: 1-10,000 rpm # Spindle interface: DIN69893-HSK-A63 (with internal coolant supply) # Automatic tool changer: 1x48 tools / chip-to-chip time approx. 2.5 sec # Max. tool diameter: Ø 82 mm / max. length 250 mm / max. weight 5 kg Electrical Connection: # Voltage: 3x400V/50Hz # Total installed power: approx. 45 kVA / 80A Dimensions: # Installation footprint: approx. 4.4 x 2.3 x 3.1 m # Weight: approx. 8,500 kg Equipment Includes: # CNC control: Siemens 840D Power Line # Chip extractor: Spring Knoll # Oil cooling system # High-pressure oil filtration system, up to 80 Bar: Knoll HL 450/1200 # Cooling system for spindle, linear guides, and control cabinet # 2 independent oil lubrication systems # Oil vapor extraction/recovery system: LTA AC3002 # Fire suppression system: Kraft & Bauer # Part presence detection: with low-pressure air sensors # In-process measurement: Marposs T25 Gsdoxwmvkopfx Afpsiu # Tool breakage detection: Blum Novotech # Tool holder detection system in spindle # Documentation: incomplete Machine Condition: NOT OPERATIONAL # Hydraulic oil leakage at Peiseler rotary table # New hydraulic pump available in stock

Condition: new, Chiron 1122242 / 562 006 HSK-A63 coupling gripper SN: H308, unused, 100% functional, scope of delivery as per photos. Giodpfx Ajy Np Ipjfpsu

Condition: new, Chiron 1122242 / 562 006 HSK-A63 clamping gripper SN: 9F08 with 5721028100 / 95281 tool arm 1088539/00 CW49/15, unused, 100% functional, scope of delivery as per photos. Gedpfx Asy Np Ivsfpeiu

Condition: used, Year of construction: 2015, x-axis 1250 mm y-axis 840 mm z-axis 550 mm control Siemens 840D turning speed range - main spindle 12000 min/-1 drive capacity - main spindle 22,5 kW Torque max. 140 Nm Number of tools 24 St. max. tool length 320 mm spindle taper HSK 63 Number of working hours 56000 h Gedoy Tbtlepfx Afpeiu spindle hours 17500 h weight of the machine ca. 9,7 t This machine can be viewed under power by appointment and is in our estimation in very good condition. Furnishing: - IKZ - chip conveyor - Glass measuring rods in all axes - automatic door - Swivel axis with counter bearing, Fibro There are 4 identical machines available. The machines were used for light countersinking and drilling work. Changes and errors in the technical data and information, as well Subject to prior sale!

Condition: used, MAKE CHIRON MODEL MILL 800 5 axis 5 axis machininng center (milling/turning from bar) Under power in our warehouse in Gussago BS Italy Mimu Machine tools CNC Fanuc 18iMBS (5 simoultaneous axis 1*) X, Y, Z (mm) 800 – 500 - 550 Rapids (Highspeed) 60 m/min Swivelling head CNC controlled (B axis) +/- 100° Turning spindle Peiseler Milling spindle 12.000 giri / 140 Nm (v nota 2) Tools 65 Tool type HSK-A 63 DIN 69893 Tool-change time 1,5 sec (v nota 3) Table 1400x500 Max table load 1200 kgs 90fjsieew Coolant through spindle 70 bar (see note 4) CNC controlled clamping/rotating unit for 6th face machining (v. nota 5) Pressurised linear encoders Swarf conveyor Renishaw-ready Y.O.M. 2006 Weight 7500 kgs Turning package Max dia 65mm RPM: 15 / 4500 Max 42,5 KW / 90 Nm. Hydraulic clamping 800 Nm. Bar loader ILS-RBK- 10012 65 Diameters min/max 5/65 mm L= 600-1200 mm Highspeed (2) 60m/min. Spindle ... Gijdpfxogmi Uns Afpsu

Condition: good (used), Year of construction: 1997, The photo shows a Fanuc Series 0-M (a popular CNC controller used in the 1980s/90s). It supports X, Y, Z axis interpolation and a tool magazine. Features include a CRT screen and a classic push-button keyboard. 3. Electrical parameters (nameplate) Power supply: 3-phase, 380 V, 50 Hz Control voltage: (not specified, but typically Fanuc 110/220 V → transformer) Auxiliary voltage: 24 V Protection: 16 A (flink) Electrical diagram number: 711 792 01 01 4. Machine construction Vertical CNC machining center (milling machine) with a fully enclosed housing. Worktable with grid of holes for mounting workpieces. Carousel tool magazine (visible in the photo) – most often 12, 20, or 24 tools (depending on version). Automatic tool changer (ATC). Z-axis operates vertically (guideway assembly and telescopic way covers visible). 5. Typical technical data (for Chiron FZ 12/15 machines from this period) (values may differ depending on the model, but these are approximate parameters): Travels (X/Y/Z): approx. 500 – 700 / 400 / 400 mm Table surface: 800 × 400 mm (example) Table load: 200 – 300 kg Spindle speed: 20 – 6000 rpm (some versions up to 8000 rpm) Spindle taper: SK 40 (DIN 69871) Spindle drive: 7.5 – 15 kW (depending on version) Tool magazine: 12 – 24 tools Positioning accuracy: ±0.005 mm Rapid traverse: 30 m/min (X/Y/Z axes) 6. Application Metalworking (steel, aluminum, cast iron, light alloys). 📌 General information: • Manufacturer: CHIRON, Germany • Type: CNC machining center • Control: as seen in the photo (Fanuc Series 0-M) • Automatic tool changer • Heavy-duty worktable with workpiece clamping options Gsdjw Uab Aspfx Afpoiu • Solid industrial construction 📌 Machine condition: • Used machine, in good condition • Regularly serviced • Shows normal signs of use • Fully functional 📌 Application: • High-precision milling • Machining of metal components • Single-part and batch production

Condition: used, Year of construction: 1990, Type/Designation: 307-153/714-750 Serial Number: 82/293 Country of Manufacture: Made in West Germany (before 1990) Technical Data (approximate, for this type of CHIRON machine from the 1970s/80s): Machine Type: Column drill / single-station drilling machine for metal Godpfxsw T U Ubj Afpsiu Motor Power: typically from 1.5 kW to 3 kW (three-phase, 380 V) Spindle Speeds: 100 – 4000 rpm (mechanically or electrically switched) Max. Drilling Diameter in Steel: approx. 20–25 mm (depending on the version) Spindle Taper: usually MT2 or MT3 Feed: manual or mechanical (some models equipped with automatic feed) Weight: several hundred kilograms (approx. 300–600 kg) Intended Use: serial production in industry (precise hole drilling, light milling operations in metals, use in production lines) Machine Table: cast iron, capable of securing workpieces Full control panel – variable speed adjustment available 2. Key Working Head Parameters (important for riveting): Press Force (kN) – if specified on the cylinder label or in the electrical box (often 10–30 kN for this size) Spindle/Slide Stroke (mm) – measure from top to bottom position Daylight (working clearance: distance between tool tip and table at top position) Throat Depth – from spindle axis to column (working reach) Max. Rivet Diameter / Work Range – specify based on tests or prior use Voltage: usually 380/400 V, 50 Hz 3. Dimensions and Logistics: L×W×H (of base/overall, in cm) Electrical Supply: 3×400 V, protection e.g. C16–C20 (indicate according to power rating) Weight (weigh with pallet jack with scale or estimate)

Condition: used, Year of construction: 2001, x-travel 300 mm y-travel 250 mm z-travel 251 mm Control Fanuc 16iMB Godpfewth Sbjx Afpeiu max. turning speeds 15.000 min/-1 tool taper HSK-A 32 number of tool places 12 Pos. In our opinion, the machine is in good used condition and can be inspected under power by appointment. Accessories, tools, and clamping devices shown are only included in the scope of delivery if noted in the additional information. Subject to changes and errors in the technical data and information, as well as subject to prior sale!

Condition: ready for operation (used), Year of construction: 2011, operating hours: 21,578 h, number of axes: 4, This 4-axis CHIRON DZ15KWM HS was manufactured in 2011. Ideal for precision vertical machining, this model offers robust construction and reliable performance. If you are looking to get high-quality milling capabilities, consider the CHIRON DZ15KWM HS machine we have for sale. Contact us for more information. Extra Information Gisdpfxox D Nmrs Afpou Machine still under power

Condition: reconditioned (used), Year of construction: 2026, functionality: fully functional, machine/vehicle number: 332-24, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, spindle speed (min.): 17,500 rpm, spindle nose: HSK63, Equipment: documentation/manual, The Chiron DZ15WM HS is also available as a retrofit project or can be sold as is, as a used machine. The retrofit project can be carried out using SIEMENS ONE. As part of the package, we can provide a fixture for your workpiece and an NC program. The photos show the machine in its current condition. General Manufacturer: CHIRON-WERKE GmbH & Co. KG, Tuttlingen Model: DZ15WM HS Type: 5-Axis Horizontal CNC Machining Center Configuration: Dual Spindle, Two Work Stations Year of Manufacture: 2013 Serial Number: 332-24 CNC Control: Siemens Sinumerik 840D/DE Powerline Spindle & Performance Spindle Interface: HSK-A63 (DIN 69893), Dual Spindle Max. Spindle Speed: 17,500 rpm Simultaneous Axes: 5 Rapid Traverse (X/Y/Z): 60 / 60 / 60 m/min Gijdpey S N Dpsfx Afpeu Positioning Tolerance: ±0.01 mm Travel & Work Envelope X-Axis Travel: 630 mm Y-Axis Travel: 400 mm Z-Axis Travel: 360 mm Tool System Tool Magazine: 2 × 32 chain-type positions (64 total) Max. Tool Weight: 5 kg (10 kg at reinforced positions) Max. Tool Diameter: 125 mm (140 mm at full magazine) Max. Tool Length: 300 mm Electrical & Hydraulic Systems Installed Power: 58 kVA Operating Voltage: 400 V / 84 A / 50–60 Hz Hydraulic System: FMB Blickle – Rexroth Bosch / Moog Hydraulic Pressure: 250 bar Hydraulic Spec: ISO VG 46, 160 L/min, 4 L tank Cabinet Cooling: Rittal TopTherm SK 3305542 Dimensions & Weight Length: 2,500 mm Width: 2,900 mm Height: 2,800 mm Machine Weight: 10,800 kg

Condition: used, Year of construction: 2014, functionality: fully functional, machine/vehicle number: 332-22, travel distance X-axis: 630 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 360 mm, controller model: SIEMENS 840D, rotational speed (max.): 17,500 rpm, spindle nose: HSK63, General Manufacturer: CHIRON-WERKE GmbH & Co. KG, Tuttlingen Model: DZ15WM HS Type: 5-Axis Horizontal CNC Machining Center Configuration: Dual spindle, two work stations Year of manufacture: 2014 Serial number: 332-22 CNC control: Siemens Sinumerik 840D/DE Powerline Spindle & Performance Spindle interface: HSK-A63 (DIN 69893), dual spindle Max. spindle speed: 17,500 rpm Simultaneous axes: 5 Rapid traverse (X/Y/Z): 60 / 60 / 60 m/min Positioning tolerance: ±0.01 mm Travel & Work Envelope X-axis travel: 630 mm Y-axis travel: 400 mm Z-axis travel: 360 mm Tool System Gijdpjy R Eywofx Afpju Tool magazine: 2 × 32 chain positions (64 total) Max. tool weight: 5 kg (10 kg at reinforced positions) Max. tool diameter: 125 mm (140 mm with full magazine) Max. tool length: 300 mm Electrical & Hydraulic Systems Installed power: 58 kVA Operating voltage: 400 V / 84 A / 50–60 Hz Hydraulic system: FMB Blickle – Rexroth Bosch / Moog Hydraulic pressure: 250 bar Hydraulic spec: ISO VG 46, 160 L/min, 4 L tank Cabinet cooling: Rittal TopTherm SK 3305542 Dimensions & Weight Length: 2,500 mm Width: 2,900 mm Height: 2,800 mm Machine weight: 10,800 kg Transport: Standard flatbed truck

Condition: good (used), Year of construction: 2000, functionality: fully functional, travel distance X-axis: 300 mm, travel distance Y-axis: 250 mm, travel distance Z-axis: 250 mm, workpiece weight (max.): 1 kg, number of slots in tool magazine: 12, controller manufacturer: Fanuc, controller model: 21m 3x / 2x 21iM, coolant supply: 1 bar, number of spindles: 1, rapid traverse Z-axis: 60 m/min, rapid traverse X-axis: 40 m/min, rapid traverse Y-axis: 40 m/min, rotational speed (max.): 10,000 rpm, workpiece diameter (max.): 63 mm, Equipment: documentation/manual, rotational speed infinitely variable, 7 units CHIRON FZ08S with 4th axis Peiseler AWU P100 Gijdpfxovx Ugwe Afpsu 3 machines were overhauled by Chiron CMS in 2016 and 4 machines in 2018, unit price approx. €30,000 each.

Condition: excellent (used), CHIRON DZ 18.2 KW, YOM 2012 Control: Fanuc 31i Path: X / Y / Z 630 x 520 x 400 mm, Pallet changer 2x 940 x 470 mm, 2 spindles Spindle distance 320 mm, 2×32-fold tool changer SK40 tool Giedouviiwopfx Afpju Max. Spindle rotation 10,000 rpm