Used Chisel Sharpening Machine for sale (64,157)

Condition: new, Year of construction: 2026, machine/vehicle number: 2026, Wet sharpening machine for Frame Saws Kdodpfxjx Uwzbj Addeg

Condition: used, Year of construction: 1973, Storage location: Nattheim Kodpfx Adjvvkt Uododg

Condition: ready for operation (used), functionality: fully functional, type of input current: three-phase, grinding width: 240 mm, Knife grinding machine WEINIG Rondamat 168 Max. tool diameter 3500mm Disk diameter 150mm Tool length 240 mm Main cutting edges up to 25° Motor 1, 1 kW Kdodpfx Ajufcnqsddog

Condition: good (used), Year of construction: 1975, Schmid saw blade sharpening machine Saw blade sharpening machine type AS 4 for circular saw blades diam.: 20 - 400 mm for circular cut-off saws up to diam.: 550 mm tooth pitch up to: 22 mm with dividing disk: 28 mm Saw blade width up to: 6.0 mm Grinding wheel diam.: 150 mm Grinding wheel speed: 3500 rpm. Infinitely variable speed control: 70 - 200 rpm. Drive power: 0.55 kW - Base frame - Grinding wheel - accessories Kjdpfxsq S Uwbj Addodg used

Condition: used, * Item no.: 900877, Kodpfx Ajlkckfjddsdg * Designation: CnHV37-20.

Condition: used, Tool sharpening machine with coolant pump. After setting the correct grinding angle, the tool is sharpened using manual/linear feed. Tool mandrel: 35 mm Kedpfxew Nv Ars Addodg clamping length: 65 mm

Condition: used, Automatic Bäuerle knife grinding machine or surface grinding machine for planer knives, chipper knives or similar. grinding motor: 1 kW Knife length: max. approx. 800 mm Kodpfjxl A Tzsx Addjdg

Condition: used, 1200064 Cutting machine for grinding small circular saw blades. Ksdjulfftjpfx Addodg saw blade ø: max. approx. 300 mm Saw blade ø: max. approx. 300 mm

Condition: used, Machine for manual grinding of milling cutters or similar. Kdodpfx Aelf H Tysddsg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 0x0x0 mm Weight 29 kg Kedpfxov A Hhho Addodg Total power requirement 0,25 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1800x930x1500 mm Weight 700 kg Total power requirement 1,65 kw Kdodpfjv A Hgqjx Addsg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 800x1000x1600 mm Weight 350 kg Kdsdpfovz Ht Ijx Addeg Total power requirement 0,6 kw

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1400x780x1500 mm Weight 500 kg Total power requirement 2 kw Kjdpfovz Htuox Addodg

Condition: new, Year of construction: 2025, Dimensions (L/W/H) 1100xx750x1380 mm Kedpsvz Htnefx Addjdg Weight 450 kg Total power requirement 0,5 kw

Condition: refurbished (used), Year of construction: 2025, functionality: fully functional, machine/vehicle number: 176308, Country of manufacture: Switzerland Voltage: 400 / 380 / 50 / 3 Net weight: approx. 350 kg Dimensions: 82x85x156 cm Kdodew T S Sqopfx Addog Installed power: max 2 kVA Customs classification: 8460.3930 TECHNICAL SPECIFICATIONS GRINDING WHEEL SPINDLE UNIT Spindle speed (both rotation directions): 2,500 / 3,500 / 5,000 / 7,100 rpm Grinding wheel motor power (2,800 rpm): 0.4 HP Vertical slide stroke (linear): 100 mm Micrometric stop adjustment travel: 25 mm Micrometric stop readout accuracy: 0.01 mm WORKPIECE SPINDLE UNIT Workpiece spindle speed (both directions, continuous): 100–900 rpm Motor power: 0.2 HP Indexing plate teeth count: 120 Angular vernier reading: 20' Collet type: W-20 Horizontal travel: 100 mm Rapid feed per handwheel turn: 2 mm Micrometric feed per handwheel turn: 0.1 mm Micrometric feed per scale division: 0.001 mm SPINDLE HEAD SWIVEL RANGE (a) Main direction: 165° Fixed ratchet increments: every 3° Increments with micrometric screw: every 2' (b) Grinding plane: approx. 15° Stop: at 0° Cross movement range: 80 mm Micrometer travel: 25 mm Reading precision: 0.01 mm Extraction motor power (2,800 rpm): 0.25 HP All technical specifications provided without guarantee and subject to possible errors or omissions.

Condition: reconditioned (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 20780, Fanuc Oi-MB - spindle HSK50 - 50-10'000 min-1 5 axes XYZAC Manufacturing origin CH Voltage 3x400V/50Hz Netweight 8’000 kg Dimensions 1170x2270x2260 mm TECHNICAL DATA (standard) Control GE Fanuc 160 i-MB Axes 5, simultaneously controllable MEASURING SYSTEMS X-, Y- and Z-axes resolution 3 µm A-axis 0,0001° C-axis 0,0001° GRINDING HEAD, GRINDING SPINDLE Power 15 kW Spindle speed 50 – 10'000 min-1 Spindle attachment HSK 50 Max wheel diameter up to 250 mm Max wheel number 6 LINEAR-AXES X-axis, travel 380 mm. Max speed 20'000 mm/min. Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm Y-axis, travel 300 mm. Max speed 5'000 mm/min. Resolution 0,0001 mm Gear ratio 24 : 4 Drive power 1.0 kW, 8 Nm Z-axis, travel 280 mm. Max speed 20'000 min-1 Resolution 0,0001 mm Gear ratio 1 : 1 Drive power 1.0 kW, 3 Nm SWIVEL-AXES C-axis, angle 210° Max speed 72°/sec. Resolution 0,0001° Drive power 1.0 kW, 8 Nm C-axis’, angle +/- 180° Max speed 90°/sec. Drive power hydraulic A-axis DMR 100 Rotation infinite Max speed 225°/sec. / 3600°/sec. Resolution 0,0001° / 0,0001° Power 1.0 kW / 5.8 kW Taper ISO 50 Center height 210 mm Kjdpfxofbt R Eo Addedg TABLE narrow piece / large piece / total Length 500 mm / 500 mm / 1000 mm Width 145 mm / 330 mm ELECTRIC CONNECTED LOAD 9 kW / 15 kW Power rating 27 kVA / 36 kVA Tension 3x400 V AC Frequency 50 Hz Main fuse 63 AT errors and omissions excepted-data given without obligation

Condition: excellent (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 5342, We are offering this very well-maintained Fortuna CS6 skiving machine, year of manufacture 2020. Manufacturer: Fortuna Model: CS6 Skiving Machine Year of Manufacture: 2020 Ksdpsx S Edfjfx Addsdg If you have any questions or need further information, please feel free to send us a message or call us.

Condition: excellent (used), for grinding saw blade diameters from 30 up to max. 300 mm Grinding wheel diameter 150 mm, lots of accessories good, well-maintained condition Kdodpfx Adox Evvfsdeg Operating manual is available

Condition: used, Year of construction: 2008, grinding diameter 160 mm dist. between centers 645 mm centre height 320 mm control SIN 840D turning speeds 27.000 U/min x-axis 550 mm y-axis 235 mm z-axis 300 mm Ksdpexxbzdjfx Addedg A - axis 360 ° C-axis 270 ° total power requirement 20 kW

Condition: new, Year of construction: 2026, functionality: fully functional, BAS 100 (STA) – Upsetting machine for band and gang saws, automatically hydraulically controlled Kjdpfx Aev Tqzysddedg Upsetting the saw teeth, in addition to setting, is another method to ensure free cutting of the saw during machining. During the upsetting process, an upsetting pin is positioned in front of the saw tooth, while the tooth is held against an anvil. By rotating the eccentric upsetting pin, the saw blade material is displaced toward the tip of the tooth. Once the upsetting process is completed, the upsetting pin automatically returns to its original position.

Condition: as good as new (ex-display), Year of construction: 2025, operating hours: 30 h, functionality: fully functional, Automatic Grinding Machine for Band Saws – ISELI BAP110 The ISELI BAP110 is a state-of-the-art, fully automatic grinding machine for band saw blades, engineered to meet the highest standards in precision, efficiency, and operator convenience. Thanks to its automated grinding process, the BAP110 ensures consistent, high-quality processing of saw teeth with minimal manpower required. 🔹 Fully automatic operation 🔹 Precisely adjustable tooth shape and pitch 🔹 Flexible use for various band saw blades 🔹 Intuitive controls with a user-friendly interface Kjdsv Tltdopfx Addedg This machine is particularly suitable for sawmills and grinding workshops that value consistently high cutting quality and optimized throughput times.

Condition: good (used), Code: 0401 Brand: PERFECTA Model: 550/S Sharpening machine for saw bands Technical data: With base Grinding wheel diameter mm 140 Kdjdpfxjuq Hhto Addog Motor Hp 0,5 three-phase Setting unit Overall dimensions mm 600 x 550 x 1400 h Weight kg 120

Condition: used, Bandsaw Blade Sharpening Machine Vollmer CAB 42 U - Bandsaws: - Blade width: 60 to 210 mm - Blade length: 6000 to 11000 mm Ksdpfsxxn Taex Addjdg - Tooth pitch: 6 to 60 mm - Tooth height: 4 to 25 mm - Rake angle: -5 to +35° - Working speed: 30 and 45 teeth/min - with central height adjustment - Feed from right to left - with clamping device for bandsaw blades

Condition: excellent (used), Working range 850 mm Kodpfx Ajr Ha Ufoddedg 0.12 kW motor Very good condition.

Condition: excellent (used), Working travel of the slide 660 mm Travel of the cross slide 160 mm Ksdpfxomv Ea Es Addsdg Vertical travel of the grinding head 240 cm Very good condition.