Saw blade sharpening machine

Gebrüder Heller SA 315

Condition: excellent (used), Year of construction: 2000, Colchester Student 2500 3-axis digital readout Collet chuck setup Various accessories Iedpfx Ahjw R S Awe Usik

Condition: used, Year of construction: 1995, functionality: fully functional, Tool grinding machine Jungner Sweden Built in 1995 Accessories Ijdpswdihrofx Ah Usik

Condition: used, Year of construction: 1996, x-travel 850 mm y-travel 630 mm z-travel 500 mm Control Heidenhain total power requirement 16 kW Isdpeuxfz Aefx Ah Ujik dimensions of the machine ca. 5 x 4,2 m

Condition: excellent (used), Tool & cutter grinder STEHLE model S811 Iijdpew Hxbyofx Ah Uok

Condition: used, Year of construction: 1980, Technical details: rpm spindle (continous): 2000 - 2500 U/min Iijdpfou Ng I Eox Ah Ujk double strokes/min.: 25; 37; 50; 75; 100 H/min. Grinding-wheel diameter: Ø 250 mm work height max.: 1350 mm total power requirement: 2,7 kW weight of the machine ca.: 1,0 t dimension machine xH: 0,85 x 1,0 x 1,8 m Use for medium to larger metal circular saws from 250 - 1450mm. Saw blade attachment Ø 60 to Ø 80mm and shaft Ø 31,5mm Tooth pitch up to 42mm Tooth depth adjustment via scale Front cutting tooth: can be chamfered on both sides up to 45° and overcut at pitch 0.02mm *

Condition: as good as new (ex-display), Flat, upright / Ø: 60 x 10 mm / 500 mm Solid, square / Ø: 35 x 35 mm / 900 mm Tube, round / Ø: 70 x 2 mm / 1000 mm Shaft diameter: 50 mm Roll diameter: 138 mm bending speed: 4,5 / 9 m/min voltage: 400 V motor power: 0,6 / 0,9 kW dimensions WxDxH, approx.: 780 x 1040 x 1470 mm Weight, approx.: 360 kg Equipment: - Machine in stable welded steel construction - Roll drive via gearbox Iiedpfx Ahopxmaue Usk - Hardened rolls (standard roll set included) - Shafts hardened and ground - All switching and operating elements on mobile control panel with foot pedal for right/left rotation - Manuel adjustable straightening rolls - Can be used horizontally and vertically Options on request: - Hydraulic top roller infeed - Two-stage motor - Digital display - Brake motor for the production of precision sheets - Roll sets

Condition: excellent (used), Universal tool & cutter grinder DECKEL model S11 Iedpfx Aewdx E Hoh Uoik

Condition: like new (used), functionality: fully functional, Weiler center lathe Model Condor 81 guidance and feed spindle lathe with 3-axis digital display from K&C, NEW Geometrically overhauled with inspection protocol for new machine tolerances Technical data: >> Machine No. 84-121 >> Center height 165 mm >> Center distance 750 mm >> Spindle speeds: from 22 to 2800 rpm >> Spindle bore 40 mm >> Short taper spindle head DIN 55027 size 5 with bayonet lock >> Tailstock MK 3 >> Feeds from 0.015 to 0.46 mm/rev >> Possible threads: metric, imperial, module, and diametral pitch >> Metric thread pitches from 0.18 to 28 mm >> Weight approx. 1100 kg >> Spindle brake switchable >> Length 1.83 m, Height 1.29 m, Depth 0.88 m Equipment and accessories: >> 3-axis digital display from K&C, new, 12 months manufacturer warranty with operating instructions Functions: switching mm/inch, coordinate selection ABS/INC, value halving, reference mark, tool programming for 200 pcs., taper calculation, radius/diameter, quick zeroing, count direction switching >> Collet chuck NEW, collets NEW from 3 to 26mm, increments of 1mm >> 160 mm three-jaw chuck with 2 sets of jaws NEW >> Multifix size B NEW with 3 piece steel holders >> Bed stop >> Electric chuck guard NEW >> Rear wall >> Operating manual >> Coolant device >> Machine feet Iodpowrm Dtjfx Ah Uoik About the machine: A Weiler Condor 81 guide and feed spindle lathe in a very good, geometrically overhauled condition is being offered. The guides are newly ground or newly scraped. Inspected according to test protocol. The accessories collets and chuck are new. For safety: The machine has a brake motor, electronic spindle guard and two emergency stops, making it an absolutely as-new lathe. Even at high speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is very user-friendly and allows surfaces as if ground to be produced. Take the opportunity to view this machine on site under power and convince yourself of its condition.

Condition: used, Year of construction: 1989, max. grinding diameter 50 mm grinding length 130 mm workpiece length 200 mm total power requirement 2,2 kW weight of the machine ca. 1200 kg dimensions of the machine ca. 2 x 2 x 2 m EWAG RS 12 universal grinding machine, built in 1989, technically and visually in good condition Grinding head: - Motor power: 2.2 kW - Spindle speeds: 1,000 - 8,000 rpm - Spindle inclination (A axis): -10° to +27° - Adjustment accuracy 1 min - Height adjustment (Y axis): 130 mm - Stroke range (X axis): 220 mm Iiedsxd Duqopfx Ah Usk - Oscillation stroke, continuously adjustable during oscillation: 0-30 mm - Oscillation frequency: 30/60 rpm Workpiece slide: - Radius adjustment (Z axis): 0.01-49 mm - Adjustment accuracy: 0.01 mm - Retraction of the slide from the grinding to the measuring position: max. 49 mm - Cross table, clamping surface: 155 x 205 mm - Adjustment range X - Y: 60 mm each - Maximum swivel angle (B axis): 260° - Connection voltage: 380 V - Weight: 1200 kg Several grinding discs are supplied, but not the workpiece holder shown in the picture.

Condition: ready for operation (used), Year of construction: 2008, Year of manufacture: 2008 Control system: Fanuc Maximum length of the turning: 650 mm Max. turning diameter: 350 mm Spindle bore: 42 mm Maximum rotary speed of the spindle: 3500 1/min Length: 2400 mm Width: 1700 mm Height: 1500 mm Weight: 1800 kg Accessories/options: 3-jaws chuck lots of jaws collet type chuck collets steady faceplate Parat type tool holders Under power in our warehouse. Iiodpfxov Tpanj Ah Uok